Titanium Modular Hand System. For fractures, replantations and reconstruction of the hand.

Transcription

1 Titanium Modular Hand System. For fractures, replantations and reconstruction of the hand. Plates precontoured for anatomic fit Instruments colorcoded for easy recognition Modules for 1.0 mm to 2.4 mm implant sizes

2 Titanium Modular Hand System. For fractures, replantations and reconstruction of the hand. System Features The Synthes Modular Hand System provides implants and instruments specifically sized for the hand. Modules for 1.0 mm/1.3 mm, 1.5 mm, 2.0 mm and 2.4 mm implant sizes Titanium implants have a low profile Instruments are color-coded for easy recognition Instrument Tray supports all modules in the Modular Hand System Indications Distal Middle Proximal Metacarpals MODULES Phalanges Phalanges Phalanges and Carpals 1.0 mm/1.3 mm* 1.5 mm 2.0 mm 2.4 mm * 1.0 mm and 1.3 mm screws are combined in one module. For a complete list of module contents, see pages 5-9. Synthes Titanium Modular Hand System

3 Plates Low profile to reduce soft tissue irritation Precontoured for anatomic fit Cut-to-length feature to minimize inventory Commercially pure titanium for biocompatibility LC-DCP and compression hole designs available T-Plates Y-Plates Available in all sizes: 1.3 mm, 1.5 mm, 2.0 mm, and 2.4 mm Available with 2, 3, or 4 holes in the head of the plate Available in all sizes: 1.3 mm, 1.5 mm, 2.0 mm, and 2.4 mm Can be cut to create an oblique L-plate Straight Plates Straight LC-DCP Plates Available in all sizes: 1.3 mm, 1.5 mm, 2.0 mm, and 2.4 mm Available in 6- and 12-hole lengths Available in two sizes: 2.0 mm and 2.4 mm Available in 4-, 6- and 8-hole lengths Extended H-Plates Condylar Plates* Left Right Available in two sizes: 1.3 mm and 1.5 mm Available in right and left designs The 1.5 mm and 2.0 mm plates have fixed blades The 2.4 mm plate accepts a 1.8 mm Buttress Pin to provide the option of a fixed angle construct Can be cut to create an oblique L-plate Available in left and right designs Synthes 1

4 Titanium Modular Hand System. For fractures, replantations and reconstruction of the hand. Screws Self-tapping design for easy insertion Low-profile head to reduce soft tissue irritation Cortical thread design Commercially pure titanium for biocompatibility 2.0 mm and 2.4 mm screws available in lengths up to 32 mm Color-coded Instruments Drill bits, countersinks, and screwdriver blades are colorcoded for easy recognition to correspond to the screw size 1.0 mm/1.3 mm Titanium Hand Module Set 0.76 mm Drill Bit 1.0 mm Drill Bit 1.3 mm Drill Bit 1.3 mm/1.5 mm Countersink Screwdriver Blade with Holding Sleeve for 1.0 mm screws Screwdriver Blade with Holding Sleeve for 1.3 mm screws 2 Synthes Titanium Modular Hand System

5 1.5 mm Titanium Hand Module Set 1.1 mm Drill Bit 1.5 mm Drill Bit 1.3 mm/1.5 mm Countersink Screwdriver Blade with Holding Sleeve for 1.5 mm and 2.0 mm screws 2.0 mm Titanium Hand Module Set 1.5 mm Drill Bit 2.0 mm Drill Bit 2.0 mm/2.4 mm Countersink Screwdriver Blade with Holding Sleeve for 1.5 mm and 2.0 mm screws 2.4 mm Titanium Hand Module Set 1.8 mm Drill Bit 2.4 mm Drill Bit 2.0 mm/2.4 mm Countersink Screwdriver with Holding Sleeve for 2.4 mm screws (see instrument set) Synthes 3

6 Titanium Modular Hand System. For fractures, replantations and reconstruction of the hand. Universal Instruments The universal instruments that are stored in the upper level of the graphic case may be used with all four modules. The wide selection of instruments will meet the demands of a variety of surgical indications Bending and Cutting Pliers Elevators and Retractors Universal Drill Guides Double Drill Sleeves Depth Gauges Screwdrivers Forceps Bending/Cutting Pliers ( ) Universal Bending Pliers ( ) Module Features Color-coded instruments Pop-up screw rack for long screws Screw length markers to customize the screw inventory of each module 4 Synthes Titanium Modular Hand System

7 Titanium Modular Hand System ( ) Graphic Case Graphic Case, for Modular Hand System Instruments Handle, with mini quick coupling mm/1.5 mm Double Drill Sleeve Cruciform Screwdriver with Holding Sleeve, for 2.4 mm screws Depth Gauge, for 1.3 mm and 1.5 mm screws Depth Gauge, for 2.0 mm and 2.4 mm screws mm/1.3 mm Double Drill Sleeve Sharp Hook mm Universal Drill Guide mm Universal Drill Guide Screw and Plate Forceps Bending/Cutting Pliers Universal Bending Pliers, 2 ea Reduction Forceps, with points, broad, ratchet Plate Holding Forceps with swivel foot Termite Forceps Small Hohmann Retractor, 6 mm width Small Hohmann Retractor, 8 mm width Periosteal Elevator, 3 mm width, curved blade, straight edge Periosteal Elevator, 3 mm width, curved blade, round edge Reduction Forceps, with points, ratchet The Titanium Modular Hand System ( ) comprises the following sets in addition to the above listed components: mm/1.3 mm Titanium Hand Module Set mm Titanium Hand Module Set mm Titanium Hand Module Set mm Titanium Hand Module Set Note: For additional information, please refer to package insert. For detailed cleaning and sterilization instructions, please refer to or to the below listed inserts, which will be included in the shipping container: Processing Synthes Reusable Medical Devices Instruments, Instrument Trays and Graphic Cases DJ1305 Processing Non-sterile Synthes Implants DJ1304 Synthes 5

8 1.0 mm/1.3 mm Titanium Hand Module Set ( ) Module mm/1.3 mm Titanium Hand Module Case Screw Length Marker Kit ** Implants mm Cortex Screws, self-tapping, cruciform, 6 mm 14 mm, 2 ea mm Cortex Screws, self-tapping, cruciform, 6 mm 18 mm, 4 ea. 1.3 mm Plates Straight, 6 holes Straight, 12 holes Extended H-Plate, right Extended H-Plate, left T-Plate, 3 holes head T-Plate, 4 holes head Y-Plate Instruments Countersink, for 1.3 mm and 1.5 mm screws Cruciform Screwdriver Blade with Holding Sleeve, for 1.3 mm screws Cruciform Screwdriver Blade with Holding Sleeve, for 1.0 mm screws 0.76 mm Drill Bits, mini quick coupling with 6 mm stop with 8 mm stop with 10 mm stop with 12 mm stop with 14 mm stop Also Available 0.76 mm Drill Bits, Stryker J-latch with 6 mm stop with 8 mm stop with 10 mm stop with 12 mm stop with 14 mm stop mm Drill Bit, Stryker J-latch mm Drill Bit, Stryker J-latch mm Drill Bit, mini quick coupling, 2 ea mm Drill Bit, mini quick coupling, 2 ea. ** One Screw Length Marker Kit will be included with the Modular Hand System or with each individual module purchase. 6 Synthes Titanium Modular Hand System

9 1.5 mm Titanium Hand Module Set ( ) Module mm Titanium Hand Module Case Screw Length Marker Kit ** Implants mm Cortex Screws, self-tapping, mm 24 mm, 4 ea. 1.5 mm Plates Straight, 6 holes Straight, 12 holes T-Plate, 3 holes head T-Plate, 4 holes head Extended H-Plate, right Extended H-Plate, left Y-Plate Condylar Plate, left Condylar Plate, right Instruments mm Drill Bit, mini quick coupling, 2 ea mm Drill Bit, mini quick coupling, 2 ea Countersink, for 1.3 mm and 1.5 mm screws Cruciform Screwdriver Blade with Holding Sleeve, for 1.5 mm and 2.0 mm screws Also Available mm Drill Bit, Stryker J-latch mm Drill Bit, Stryker J-latch Synthes 7

10 2.0 mm Titanium Hand Module Set ( ) Module mm Titanium Hand Module Case Screw Length Marker Kit ** Implants mm Cortex Screws, self-tapping, 6 mm 24 mm, 4 ea mm Cortex Screws, self-tapping, 26 mm 32 mm, 2 ea. 2.0 mm Plates Condylar, left Condylar, right Straight, 6 holes Straight, 12 holes T-Plate, 2 holes head T-Plate, 3 holes head Y-Plate LC-DCP, 4 holes LC-DCP, 6 holes LC-DCP, 8 holes Instruments mm Drill Bit, mini quick coupling, 2 ea mm Drill Bit, mini quick coupling, 2 ea Countersink, for 2.0 mm and 2.4 mm screws Cruciform Screwdriver Blade with Holding Sleeve, for 1.5 mm and 2.0 mm screws Also Available mm Drill Bit, Stryker J-latch mm Drill Bit, Stryker J-latch ** One Screw Length Marker Kit will be included with the Modular Hand System or with each individual module purchase. 8 Synthes Titanium Modular Hand System

11 2.4 mm Titanium Hand Module Set ( ) Module mm Titanium Hand Module Case Screw Length Marker Kit ** Implants mm Cortex Screws, self-tapping, 6 mm 24 mm, 4 ea mm Cortex Screws, self-tapping, 26 mm 32 mm, 2 ea mm Titanium Buttress Pin, 18 mm, 4 ea. 2.4 mm Plates Straight, 6 holes Straight, 12 holes T-Plate, 2 holes head T-Plate, 3 holes head Y-Plate Condylar Plate, right Condylar Plate, left LC-DCP Plate, 4 holes LC-DCP Plate, 6 holes LC-DCP Plate, 8 holes Instruments Countersink, for 2.0 mm and 2.4 mm screws Threaded Drill Guide for 2.4 mm Condylar Plate mm Drill Bit, mini quick coupling, 2 ea mm Drill Bit, mini quick coupling, 2 ea Bending Iron for 2.4 mm Condylar Plate Also Available mm Drill Bit, Stryker J-latch mm Drill Bit, Stryker J-latch Synthes 9

12 Synthes (USA) 1302 Wrights Lane East West Chester, PA Telephone: (610) To order: (800) Fax: (610) Synthes (Canada) Ltd Meadowpine Boulevard Mississauga, Ontario L5N 6P9 Telephone: (905) To order: (800) Fax: (905) Synthes, Inc. or its affiliates. All rights reserved. LC-DCP and Synthes are trademarks of Synthes, Inc. or its affiliates. Printed in U.S.A. 8/10 J2986-F