TORNIER MAXLOCK EXTREME. Clavicle Plating System SURGICAL TECHNIQUE
|
|
- Phyllis Parks
- 5 years ago
- Views:
Transcription
1 TORNIER MAXLOCK EXTREME Clavicle Plating System SURGICAL TECHNIQUE
2 2
3 Table of Contents: Key Design Features...4 Surgical Technique...5 Implants & Instruments...9 3
4 Key Design Features There are 7 anatomically contoured plates available for both superior and anterior application. These low-profile plates range in thickness from 2.4 mm to 1.8 mm. Superior Plate: One plate size with 10.5 degree bend and compression capabilities. Multi-planar fixation and tubular design allows for best fit and maximum fixation. Lateral Plate: Short and long sizes available in both left and right. The plate design allows for 4 screws in the distal fragment. Anterior Plate: Short and long sizes available with a tubular design and multi-planar fixation medially. Custom Soft Tissue Protector: Used to protect brachial plexus and supra clavicular nerves when drilling bi-cortically. Key-way Guide: Designed for quick and accurate drilling when using locking screws. The clavicle plates utilize the MAXLOCK EXTREME locking screw technology. Surgeon has the choice of locking or non-locking screws. There are 4 screw options available: 2.7 mm, 3.5 mm and 4.0 mm non-locking and 3.5 mm locking. The screws have a HEXSTAR drive that can aid in reducing the chance of stripping, a blunt tip to reduce tendon abrasion and a hybrid thread design to maximize purchase and bite. 4
5 Surgical Technique Step 1: The surgical site is prepared and the fusion or fracture site is reduced and temporarily stabilized by the surgeon s preferred technique. Step 2: Choose an appropriately sized plate based on size and type of indication. The plates are available in various lengths and sizes. Care must be taken not to scratch or notch the implants throughout the procedure. Step 3: If necessary, use the bending irons or bending pliers to contour the plate to the bone surface. When using the bending irons, use your thumbs to apply pressure to the top while pulling apart at the bottom. Use the top slots to place a concave bend in the plate and the bottom slots to place a convex bend in the plate. Each bend should be in one direction only. Reverse or over bending may cause reduced fatigue life. Avoid excessive bending through the locking holes. If the plate is contoured through the locking holes, a non-locking screw is recommended to avoid cross-threading of the locking screw. Note : To bend a lateral clavicle plate, use the bending irons to hold the proximal end while bending the distal end with the bending pliers. Do not insert distal end of the lateral plate into bending irons. Step 4: The plate may be temporarily held in place with standard plate holding forceps, or olive wires (through locking holes or compression slots). 5
6 Step 5: The screw holes in the plates are compatible with a variety of screw options. Non-locking 2.7 mm, 3.5 mm, and 4.0 mm screws are offered and can be used in either screw hole. 3.5 mm Locking screws are provided for only the threaded locking hole. Screw diameter is chosen based on indication and surgeon preference; a combination of screws may be used in the same plate. Step 6: Four drill bits are provided in the system: 1.9 mm (Gold), 2.4 mm (Magenta) & 2.7 mm (Aqua). The 1.9 mm bit (MFT ) is to be used in conjunction with 2.7 mm screws and the 2.4 mm bit (MFT ) is to be used in conjunction with 3.5 mm screws and the 2.7 mm bit (MFT ) is to be used in conjunction with 4.0 mm screws. A 4.0 mm (double Aqua ring/mft ) drill bit is also found in the system and can be utilized for lagging all non-locking screw sizes. Step 7: When drilling for non-locking screws, the standard handheld drill guide should be used (MFT , MFT , or MFT ). The standard drill guides are color coded to match the appropriate drill bit and screw diameter. When drilling for a locking screw, either the xed drill guide (MFT F) or the Key-way Guide (MFT KG) should be used. The xed drill guide threads into the locking hole to provide the proper angle for drilling. To use the Key-way Guide, align the lobes on the tip of the guide with the lobes in the threaded hole and press into the plate while drilling to ensure proper alignment. Note : It is necessary to avoid over penetration of the inferior clavicle due to the proximity of the subclavian artery and the brachial plexus. Always use the tissue protector on inferior aspect of clavicle when drilling into bone to protect these structures. 6
7 Step 8: Drill to desired depth. Take care to not move the plate after drilling for a locking hole in order to maintain the proper pilot hole alignment and prevent locking screw cross-threading. Use only the provided depth gauge to determine screw length. For all screws used throughout procedure, verify screw length in appropriate gauge on screw caddy. Use the driver to insert the screw into the hole and drive the screw. Note : The depth gauge reading corresponds to the working length of the screw (from distal tip to underneath the screw head). It is recommended that the surgeon use fluoroscopy to verify screw length and placement. Step 9: Non-locking screws placed in the compression slots can be used to generate inter-fragmentary compression in the direction of the slot. The direction of the slot is indicated by an arrow. Note : Some plates have compression capabilities in two directions. Always drive compression in the direction the arrow is pointing. Step 10: In order to generate compression, the plate is first xed on the side of the fusion site that the arrow is pointing to using a locking or nonlocking screw with bi-cortical purchase. Step 11: Drill into the slot as far away from the fusion site as possible (opposite of direction the arrow is pointing). 7
8 Step 12: Insert a non-locking screw bi-cortically using the HEXSTAR driver. Note : If maximum compression is desired it is advised to use a 4.0 screw. Step 13: Tighten the screw into the slot to generate compression. Note : The amount of compression can be modulated from 2 mm (maximum) to 0 mm by drilling into an area of the slot closer to the fusion site. The slot may be utilized with no compression if the non-locking screw is placed in the neutral side of the slot (area of the slot closest to the fusion site). Step 14: Insert any remaining necessary screws. Step 15: When a lag technique is desired, use the 4.0 mm drill bit (double Aqua ring) with the corresponding double ring drill guide to over drill the gliding hole. Note : Be careful to not over drill past the fusion site. Step 16: Do not over torque the screws. Step 17: Correct placement of the fixation device is verified. The soft tissues are replaced as required by the operative procedure and surgeon preferred technique. 8
9 Implants & Instruments MAXLOCK EXTREME Plates Catalog # Description CLA-002-ANTL Long Anterior Clavicle Plate CLA-002-ANTS Short Anterior Clavicle Plate CLA-002-LATL Standard Left Lateral Clavicle Plate CLA-002-LATR Standard Right Lateral Clavicle Plate CLA-002-LATXL Long Left Lateral Clavicle Plate CLA-002-LATXR Long Right Lateral Clavicle Plate CLA-002-SUP6 Superior Clavicle Plate Drill Bits Catalog # MFT MFT MFT MFT Description Ø1.9 mm Standard Drill Bit Ø2.4 mm Standard Drill Bit Ø2.7 mm Standard Drill Bit Ø4.0 mm Standard Drill Bit Wires Catalog # MFT-040 MFT Description Olive Wire 1.1 mm K-wire Instruments Catalog # CLA-PRO Description Clavicle Soft Tissue Protector 9
10 Ø2.7 Non-Locking Screws Catalog # Description MFT Ø2.7 8 mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw Ø3.5 Non-Locking Screws Catalog # Description MFT Ø3.5 8 mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw 10
11 Ø3.5 Locking Screws Catalog # Description MFT Ø3.5 8 mm Locking Screw MFT Ø mm Locking Screw MFT Ø mm Locking Screw MFT Ø mm Locking Screw MFT Ø mm Locking Screw MFT Ø mm Locking Screw MFT Ø mm Locking Screw MFT Ø mm Locking Screw MFT Ø mm Locking Screw MFT Ø mm Locking Screw MFT Ø mm Locking Screw MFT Ø mm Locking Screw MFT Ø mm Locking Screw MFT Ø mm Locking Screw MFT Ø mm Locking Screw MFT Ø mm Locking Screw MFT Ø mm Locking Screw MFT Ø mm Locking Screw Ø4.0 Non-Locking Screws Catalog # Description MFT Ø4.0 8 mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw MFT Ø mm Non-locking Screw 11
12 1023 Cherry Road Memphis, TN Nesbitt Avenue South Bloomington, MN Proper surgical procedures and techniques are the responsibility of the medical professional. This material is furnished for information purposes only. Each surgeon must evaluate the appropriateness of the material based on his or her personal medical training and experience. Prior to use of any Tornier implant system, the surgeon should refer to the product package insert for complete warnings, precautions, indications, contraindications, and adverse effects. Package inserts are also available by contacting Wright. Contact information can be found in this document and the package insert. and denote Trademarks and Registered Trademarks of Wright Medical Group N.V. or its affiliates Wright Medical Group N.V. or its affiliates. All Rights Reserved. MXE REV B ECN Jun-2016
Small Plate and Screw System SURGICAL TECHNIQUE
MINI MAXLOCK EXTREME Small Plate and Screw System SURGICAL TECHNIQUE Contents Key Design Features 2 Surgical Technique 3 Implants and Instruments 9 Proper surgical procedures and techniques are the responsibility
More informationORTHOLINK. 2 - Hole Wedge Osteotomy Plate SURGICAL TECHNIQUE
MAXLOCK EXTREME ORTHOLINK 2 - Hole Wedge Osteotomy Plate SURGICAL TECHNIQUE Contents Key Design Features 3 Surgical Technique 4 Implants and Instruments 7 Proper surgical procedures and techniques are
More informationDistal Fibula Plate SURGICAL TECHNIQUE
MAXLOCK EXTREME Distal Fibula Plate SURGICAL TECHNIQUE Contents Key Design Features 3 Surgical Technique 4 Implants and Instruments 8 Proper surgical procedures and techniques are the responsibility of
More informationMTP Set SURGICAL TECHNIQUE
MINI MAXLOCK EXTREME MTP Set SURGICAL TECHNIQUE Contents Table of Contents Key Design Features 3 Surgical Technique Standard MTP Plate 4 MTP Plate with POCKETLOCK Technology 10 Implants and Instruments
More informationMEDIALMAX System SURGICAL TECHNIQUE
MAXLOCK EXTREME MEDIALMAX System SURGICAL TECHNIQUE Contents The MEDIALMAX Advantage Design Feature Various flex options POCKETLOCK Technology Anatomic design Advantage Provides the surgeon with multiple
More informationISO Plate SURGICAL TECHNIQUE
MINI MAXLOCK EXTREME ISO Plate SURGICAL TECHNIQUE Contents Table of Contents Key Design Features 2 Surgical Technique 3 Implants and Instruments 8 Key Design Features The MINI MAXLOCK EXTREME ISO (Intraosseous
More informationMaxTorque. surgical technique. Cannulated Screw System. Foot & Ankle. OrthoHelix Technology
MaxTorque Cannulated Screw System OrthoHelix Technology surgical technique Foot & Ankle 2 M A X T O R Q U E C A N N U L A T E D S C R E W S Y S T E M Table of Contents Advantages 3 Indications 4 Contraindications
More informationDART-FIRE. Small Screw System SURGICAL TECHNIQUE
DART-FIRE Small Screw System SURGICAL TECHNIQUE DART-FIRE Small Screw System SURGICAL TECHNIQUE Contents Chapter 1 4 Chapter 2 6 Appendix 1 9 Appendix 2 11 Introduction DART-FIRE Small Screw System Surgical
More informationTechnique Guide. LCP Pilon Plate 2.7/3.5
Technique Guide LCP Pilon Plate 2.7/3.5 LCP Pilon Plate 2.7/3.5 Table of contents Indications 3 Implants 4 Instruments 5 Surgical technique 6 Implant removal 12 Image intensifier control Warning This
More informationDART-FIRE. Small Screw System SURGICAL TECHNIQUE
DART-FIRE Small Screw System SURGICAL TECHNIQUE DART-FIRE Small Screw System Surgical Technique Contents Chapter 1 4 Chapter 2 6 Chapter 3 7 Appendix 1 10 Appendix 2 12 Introduction Intended Use DART-FIRE
More informationDART-FIRE. Small Screw System SURGIC A L T ECHNIQUE
DART-FIRE Small Screw System SURGIC A L T ECHNIQUE Contents Headline Headline PREFACE Chapter 1 4 Chapter 2 6 Chapter 3 7 Appendix A 10 Appendix B 12 Introduction Intended Use DART-FIRE Small Screw System
More informationLCP Pilon Plate 2.7/3.5
Surgical Technique LCP Locking Compression Plate Original Instruments and Implants of the Association for the Study of Internal Fixation AO/ASIF Table of contents Indications 3 Implants 4 Instruments 5
More informationsurgical technique addendum
s h o u l d e r Solutions by Tornier Aequalis reversed II shoulder system surgical technique addendum Aequalis reversed II threaded post baseplate surgical technique addendum s u r g i c a l t e c h n
More informationOPERATIVE TECHNIQUE RIVAL REDUCE FRACTURE PLATING SYSTEM. foot & ankle trauma procedures
OPERATIVE TECHNIQUE RIVAL REDUCE FRACTURE PLATING SYSTEM foot & ankle trauma procedures INTRODUCTION 3 SYSTEM DESCRIPTION 3 TECHNICAL DETAILS 4 SALES AND MARKETING CONFIGURATION 5 OPERATIVE TECHNIQUE 7
More informationOPERATIVE TECHNIQUE RIVAL VIEW PLATING SYSTEM. foot & ankle reconstruction procedures
OPERATIVE TECHNIQUE RIVAL VIEW PLATING SYSTEM foot & ankle reconstruction procedures INTRODUCTION 3 SYSTEM DESCRIPTION 3 TECHNICAL DETAILS 4 SALES AND MARKETING CONFIGURATION 5 OPERATIVE TECHNIQUE 7 OPERATIVE
More informationVLP FOOT Variable Angle Locked Plating System
Surgical Technique VLP FOOT Variable Angle Locked Plating System Surgical Technique Table of Contents Product overview Implant selection...2 Introduction...3 System overview...4 Indications...4 Design
More informationTechnique Guide. Quadrilateral Surface Plates 3.5. Part of the Low Profile Pelvic System 3.5.
Technique Guide Quadrilateral Surface Plates 3.5. Part of the Low Profile Pelvic System 3.5. Table of Contents Introduction Quadrilateral Surface Plates 3.5 2 AO Principles 4 Indications 5 Surgical Technique
More informationIntegra. Capture Screw System SURGICAL TECHNIQUE
Integra Capture Screw System SURGICAL TECHNIQUE Table of Contents Indications... 2 Contraindications... 2 System Description... 2 System Features... 2 Cannulated Low-Profile Screws (AC-Series) Overview...
More informationLocking Small Fragment
Locking Small Fragment Page 1 Locking Small Fragment Table of contents Implants 5 Operation technique 7 Inserting drill guides 7 Drilling 7 Length measurement 7 Inserting the measured screw 8 Different
More informationOPERATIVE TECHNIQUE RIVAL BITE HEADED CANNULATED AND HEADLESS COMPRESSION SCREWS. foot & ankle applications
OPERATIVE TECHNIQUE RIVAL BITE HEADED CANNULATED AND HEADLESS COMPRESSION SCREWS foot & ankle applications INTRODUCTION 3 SYSTEM DESCRIPTION 3 TECHNICAL DETAILS 4 SALES AND MARKETING CONFIGURATION 6 OPERATIVE
More informationInstructions for Use. LCP Locking Compression Plate. Combine without Compromise.
Instructions for Use LCP Locking Compression Plate. Combine without Compromise. Table of Contents LCP: Combine without Compromise 2 AO ASIF Principles of Osteosynthesis 4 Indications and Contraindications
More informationTechnique Guide. 2.4/2.7 mm Locking Tarsal Plates. Talus Plate, Navicular Plate and Cuboid Plate.
Technique Guide 2.4/2.7 mm Locking Tarsal Plates. Talus Plate, Navicular Plate and Cuboid Plate. Table of Contents Introduction 2.4/2.7 mm Locking Tarsal Plates 2 AO Principles 4 Indications 5 Clinical
More informationTechnique Guide. Variable Angle LCP 1 st MTP Fusion Plates 2.4/2.7. Part of the Variable Angle LCP Forefoot / Midfoot System 2.4 / 2.7.
Technique Guide Variable Angle LCP 1 st MTP Fusion Plates 2.4/2.7. Part of the Variable Angle LCP Forefoot / Midfoot System 2.4 / 2.7. Table of Contents Introduction Variable Angle LCP 1 st MTP Fusion
More informationDISTAL RADIUS PLATES 3.5 mm / ANGULARLY STABLE. Distal radius plates 3,5 mm / angularly stable. Locking bone screws. Cortical bone screw
SURGICAL NÁSTROJE TECHNIQUE PRO ARTROSKOPII DISTAL INSTRUMENTS RADIUS PLATES FOR ARTHROSCOPY 3.5 mm / ANGULARLY STABLE Distal radius plates 3.5 mm / angularly stable Indication The plates are used for
More informationTreace Medical Concepts Plating System
Treace Medical Concepts Plating System Multiplanar Fixation System Surgical Technique Lapidus and 1 st MTP Fusion Lapidus Fusion Surgical Approach 1. Perform a longitudinal incision dorsally over the 1
More informationBack to health. Back to work. Back to life.
TECHNIQUE Back to health. Back to work. Back to life. U PLUS 90 INSTRUMENTATION OVERVIEW W&H IMPLANTMED POWER UNIT OVERVIEW Low-profile Primary Guides Compresses the U-clip to match rib thickness Clamps
More informationTechnique Guide. Modular Sternal Cable System. Flexibility and strength in sternal closure and repair.
Technique Guide Modular Sternal Cable System. Flexibility and strength in sternal closure and repair. Table of Contents Introduction Overview 2 Indications and Contraindications 3 Surgical Technique A.
More informationSurgical Technique. Customer Service:
Patent Pending CAUTION: Federal Law (USA) restricts this device to sale by or on the order of a physician. Notes This page is blank INDICATIONS FOR USE The Extremity Medical Hallu X Intramedullary Fusion
More information5th Metatarsal Fracture System Surgical Technique
5th Metatarsal Fracture System Surgical Technique 5th Metatarsal Fracture System 5th Metatarsal Fracture System The 5th Metatarsal Fracture System (AR-8956S) is a uniquely designed screw and plate system
More informationDistal Medial Tibia Plate Surgical Technique
Locking Compression Technology by aap 1 Disclaimer This surgical technique is exclusively intended for medical professionals, especially physicians, and therefore may not be regarded as a source of information
More informationMTP Fusion Surgical Technique
MTP Fusion Surgical Technique Patent and Patent Pending CAUTION: Federal Law (USA) restricts this device to sale by or on the order of a physician. INDICATIONS FOR USE The Omni Foot Plating System is intended
More informationLCP Pilon Plate 2.7/3.5
LCP Pilon Plate 2.7/3.5 Surgical Technique This publication is not intended for distribution in the USA. Instruments and implants approved by the AO Foundation. Table of contents Indications 2 Implants
More informationMecron Cannulated Screws
Surgical Technique and Ordering Information 2 Table of contents Description... 4 Indications for use... 4 Contraindications... 4 State-of-the-art design features... 5 Surgical Technique... 6 Surgery Steps
More informationAnkle Fracture System. Surgical Technique STRENGTH FROM WITHIN
Ankle Fracture System Surgical Technique STRENGTH FROM WITHIN Ankle Fracture System The Sonoma FibuLock nail is the first intramedullary device that has the same indications as plates and delivers anatomic
More informationCHARLOTTE. Multi-Use Compression Screw
CHARLOTTE Multi-Use Compression Screw CHARLOTTE multi-use compression screw surgical technique SURGICAL ADVISORS ROBERT ANDERSON, MD BRUCE COHEN, MD W. HODGES DAVIS, MD Proper surgical procedures and techniques
More informationVortex TRAUMATOLOGY. Vortex Distal Femur
Vortex TRAUMATOLOGY Vortex Distal Femur 1 Content 1. Introduction 4 4. Implant list 16-17 The following surgical description contains general outlines for Vortex Distal Femur plating. However, the operating
More informationVariAx DistalFibula. Foot & Ankle. Locking Plate System. Operative Technique
VariAx DistalFibula Locking Plate System Operative Technique Foot & Ankle Distal Fibula Fracture Repair Polyaxial Locking Technology Low Profile Design VariAx 2 Color Coded Screws and Instruments VariAx
More informationUniversal Humeral Nail
990210009 INDEX Indications Preoperative Planning Patient Position Surgical Technique - Step 1 Open Humerus - Step 2 Calibrate The Nail - Step 3 Insert Nail - Step 4 Proximal Locking - Step 5 Assemble
More informationLag Screw Device TECHNIQUE GUIDE. Indicated for symphyseal fracture fixation of the mandible. Instruments and implants approved by the AO Foundation
Lag Screw Device TECHNIQUE GUIDE Indicated for symphyseal fracture fixation of the mandible Instruments and implants approved by the AO Foundation Lag Screw Device Indicated for symphyseal fracture fixation
More informationVECTRA. SURGICAL TECHNIQUE. Anterior cervical plate system. This publication is not intended for distribution in the USA.
VECTRA. Anterior cervical plate system. This publication is not intended for distribution in the USA. SURGICAL TECHNIQUE Contents Indications and contraindications Implants Vario Case Instruments Surgical
More informationThe Percutaneous Reduction Forceps Technique Guide
The Percutaneous Reduction Forceps Technique Guide Indications + Product Overview Introduction The Percutaneous Reduction Forceps The Percutaneous Reduction Forceps facilitate standard technique for fixation
More informationFibula Plating System
ANATOMIC LOCKED PLATING SYSTEM Fibula Plating System Securing optimal fixation through versatile locked and compression plating technology Contents Surgeon Design Team 2 Introduction 3 Anatomic Fibula
More information1.5 MM LCP SYSTEM. For treatment of fractures and arthrodeses of canines and felines SURGICAL TECHNIQUE
1.5 MM LCP SYSTEM For treatment of fractures and arthrodeses of canines and felines SURGICAL TECHNIQUE TABLE OF CONTENTS INTRODUCTION 1.5 mm LCP System 2 AO Principles 4 SURGICAL TECHNIQUE Reduce Fracture
More informationTechnique Guide MTP Arthrodesis System
Technique Guide MTP Arthrodesis System The CheckMATE MTP Arthrodesis System features low-profile, anatomically pre-contoured Bone Plates with either a combination of locking and non-locking holes or all-locking
More informationCETRA ANTERIOR CERVICAL PLATE
CETRA TM ANTERIOR CERVICAL PLATE The CETRA Anterior Cervical Plate System offers a low profile titanium alloy plate with an intuitive locking mechanism, large graft windows, a high degree of screw angulation
More informationVECTRA SURGICAL TECHNIQUE. Anterior cervical plate system. This publication is not intended for distribution in the USA.
VECTRA Anterior cervical plate system This publication is not intended for distribution in the USA. SURGICAL TECHNIQUE Image intensifier control This description alone does not provide sufficient background
More informationVirage OCT Spinal Fixation System
Virage OCT Spinal Fixation System Virage OCT Spinal Fixation System Change Your Perspective Become a Part of the Posterior Fixation Revolution The Virage System is an Occipital-Cervico-Thoracic (OCT) spinal
More informationOrthopedic Bone Nail System Universal Humeral Nail
Orthopedic Bone Nail System Universal Humeral Nail Surgical Technique Manual Note: The surgical procedures should be performed under the guidance of qualified skilled orthopedic surgeons, and this surgical
More informationProximal Humerus System 3.5
SURGICAL TECHNIQUE STEP BY STEP Proximal Humerus System 3.5 APTUS Shoulder 2 Proximal Humerus System 3.5 Contents 3 Introduction 3 Product Materials 3 Indications 3 Contraindications 3 Color Coding 3 Symbols
More informationDLS Dynamic Locking Screw. Combined with LCP Locking Compression Plate.
DLS Dynamic Locking Screw. Combined with LCP Locking Compression Plate. Instructions for Use Discontinued June 2016 DSEM/TRM/0517/0844(1) Table of Contents Introduction DLS Dynamic Locking Screw 2 Indications
More informationProximal Humerus Plate 3.5 Surgical Technique
Locking Compression Technology by aap 1 Disclaimer This surgical technique is exclusively intended for medical professionals, especially physicians, and therefore may not be regarded as a source of information
More informationVariable Angle LCP Forefoot/Midfoot System 2.4/2.7. Procedure specific plates for osteotomies, arthrodeses and fractures of the foot.
Instruction for Use Variable Angle LCP Forefoot/Midfoot System 2.4/2.7. Procedure specific plates for osteotomies, arthrodeses and fractures of the foot. Table of Contents Introduction VA-LCP Forefoot/Midfoot
More informationAnterior Cervical Plate SURGICAL TECHNIQUE GUIDE. Surgeon Driven Innovation
Anterior Cervical Plate SURGICAL TECHNIQUE GUIDE Surgeon Driven Innovation 1 The Snowmass Anterior Cervical Plate System is intended for the surgical treatment and correction of traumatic and pathologic
More informationWRIST SYSTEM. ARIX Volar Distal Radius Locking Plate System
WRIST SYSTEM A Contents 3 4 7 14 15 16 19 21 Indications Product Overview Features & Benefits Ordering Information - Screws -2.5mm Self-Tapping Cortical Screws (Non-Locking) -2.5mm Self-Tapping Locking
More informationTechnique Guide. 7.0 mm Cannulated Screws. Part of the Synthes Cannulated Screw System.
Technique Guide 7.0 mm Cannulated Screws. Part of the Synthes Cannulated Screw System. Table of Contents Introduction 7.0 mm Cannulated Screws 2 AO Principles 3 Indications 4 Surgical Technique Surgical
More informationTORNIER BLUEPRINT. 3D Planning + PSI SCAN PROTOCOL
TORNIER BLUEPRINT 3D Planning + PSI SCAN PROTOCOL Contents 3 Introduction 3 Patient preparation 3 Scanning instructions 4 Image instructions 5 Scanning parameters 6 Technical instructions 2 BLUEPRINT 3D
More informationTechnique Guide. Occipito-Cervical Fusion System. Implants and instruments designed to optimize fixation to the occiput.
Technique Guide Occipito-Cervical Fusion System. Implants and instruments designed to optimize fixation to the occiput. Table of Contents Introduction Overview 2 AO ASIF Principles 4 Indications and Contraindications
More informationCSLP Variable Angle. For Use with the Cervical Spine Locking Plate System TECHNIQUE GUIDE. Self-drilling Screw. Variable Screw Angulation
CSLP Variable Angle For Use with the Cervical Spine Locking Plate System TECHNIQUE GUIDE Self-drilling Screw Variable Screw Angulation Original Instruments and Implants of the Association for the Study
More informationVariAx Fibula Locking Plate System
VariAx Fibula Locking Plate System Operative Technique Distal Fibula Fracture Repair Polyaxial Locking Technology Low Profile Design 1 Contributing Surgeon: Bradley R. Merk, MD Associate Professor of Orthopaedic
More informationIntegra. Stainless Headed Compression Screw System SURGICAL TECHNIQUE
Integra Stainless Headed Compression Screw System SURGICAL TECHNIQUE Table of Contents Design Rationale...2 Indications...2 Contraindications...2 Surgical Technique Step 1: Inserting Guide Wire... 3 Step
More informationSmall Fragment Locking Compression Plate (LCP ) System Stainless Steel and Titanium TECHNIQUE GUIDE
Small Fragment Locking Compression Plate (LCP ) System Stainless Steel and Titanium TECHNIQUE GUIDE R Original Instruments and Implants of the Association for the Study of Internal Fixation AO ASIF Introduction
More informationCHARLOTTE CLAW Plate Compression Locking Arthrodesis by Wright SURGICAL TECHNIQUE
CHARLOTTE CLAW Plate Compression Locking Arthrodesis by Wright SURGICAL TECHNIQUE Contents Chapter 1 1 Chapter 2 2 2 2 3 4 5 6 Appendix A 7 Preoperative Planning Surgical Technique Calcaneal Cuboid Arthrodesis
More informationTechnique Guide. Variable Angle LCP Opening Wedge Plates 2.4/2.7. Part of the Variable Angle LCP Forefoot / Midfoot System 2.4 / 2.7.
Technique Guide Variable Angle LCP Opening Wedge Plates 2.4/2.7. Part of the Variable Angle LCP Forefoot / Midfoot System 2.4 / 2.7. Table of Contents Introduction Variable Angle LCP Opening Wedge Plates
More informationSurgical Technique Guide
Surgical Technique Guide Patented - www.flow-fx.net Flow-FX, LLC 9301 W 191st Street Mokena, IL 60448 P. 815.531.4424 by Flow-FX, LLC. 2017 Products referenced with TM are trademarks of Flow-Fx. STG-101
More informationPeanut Growth Control Plating System. Surgical Technique
Peanut Growth Control Plating System Surgical Technique 1 Peanut Growth Control Plating System Table of Contents System Design Features... 2 Instrument Tray... 5 Implant Caddy... 6 Surgical Technique...
More informationMatrixMANDIBLE Preformed Reconstruction Plates. Preshaped to the mandibular anatomy.
MatrixMANDIBLE Preformed Reconstruction Plates. Preshaped to the mandibular anatomy. Technique Guide CMF Matrix Table of Contents Introduction MatrixMANDIBLE Preformed Reconstruction Plates 2 AO Principles
More informationDistal Radius System 2.5
SURGICAL TECHNIQUE STEP BY STEP Distal Radius System 2.5 APTUS Wrist 2 Distal Radius System 2.5 Contents 3 Introduction 3 Product Materials 3 Indications 3 Contraindications 3 Color Coding 3 Possible Combination
More informationACLP Anterior Cervical Locking Plate System TECHNIQUE GUIDE
ACLP Anterior Cervical Locking Plate System TECHNIQUE GUIDE Instruments and implants approved by the AO Foundation ACLP Anterior Cervical Locking Plate System The ACLP System is designed to reduce the
More informationSurgical Technique ANAX TM OCT. Spinal System
Surgical Technique ANAX TM OCT Spinal System Product Overview Occipital plate Medial occipital plate (Small, Medium, Large) Lateral occipital plate (Small, Medium, Large) Cortical screw (D4.5mm), Rescue
More informationIntegra. Tibio Talo Calcaneus Plate SURGICAL TECHNIQUE
Integra Tibio Talo Calcaneus Plate SURGICAL TECHNIQUE Table of Contents Indications...02 Contraindications...02 Description...02 Surgical Technique...03 Step 1: Articular Surfaces Preparation...03 Step
More informationSurgical Technique 1
Surgical Technique 1 D-RAD SMART PACK Single-Use Volar Distal Radius Plating System Surgical Technique Table of Contents Indications... 3 Contraindications... 3 D-RAD SMART PACK product overview... 4 Instrumentation...
More informationReflex Hybrid System Overview
Spine Reflex Hybrid System Overview Anterior Cervical Plating System Introduction The Reflex Hybrid ACP System offers a low-profile anterior cervical plate along with a selection of bone screw types to
More informationUlna Shortening System 2.5
SURGICAL TECHNIQUE STEP BY STEP Ulna Shortening System 2.5 APTUS Wrist 2 Ulna Shortening System 2.5 Contents 3 Introduction Product Materials Indications Contraindications Color Coding 4 General Instrument
More informationTitanium Modular Hand System. For fractures, replantations and reconstruction of the hand.
Titanium Modular Hand System. For fractures, replantations and reconstruction of the hand. Plates precontoured for anatomic fit Instruments colorcoded for easy recognition Modules for 1.0 mm to 2.4 mm
More informationLCP Pilon Plate 2.7/3.5. Surgical Technique
LCP Pilon Plate 2.7/3.5 Surgical Technique Image intensifier control This description alone does not provide sufficient background for direct use of DePuy Synthes products. Instruction by a surgeon experienced
More informationVariable Angle LCP Tarsal Plates 2.4/2.7. Navicular Plate and Cuboid Plates.
Variable Angle LCP Tarsal Plates 2.4/2.7. Navicular Plate and Cuboid Plates. Surgical Technique This publication is not intended for distribution in the USA. Instruments and implants approved by the AO
More informationDigital Compression Screw
Digital Compression Screw Surgical Technique Contents Product The BioPro Digital Compression Screw is a stainless steel lag screw designed for digital fusions. Table of contents Indications & Contraindications
More information3.5 mm/ 2.7 mm LCP. PanCarPaL arthrodesis S PLate. BroCHUre. For treatment of carpal joints in dogs
3.5 mm/ 2.7 mm LCP PanCarPaL arpal arthrodesis S PLate For treatment of carpal joints in dogs BroCHUre PLate DeSIGn the DePuy Synthes Vet 3.5 mm/2.7 mm LCP Pancarpal arthrodesis plate is intended for the
More informationVariAx. Foot & Ankle. Foot Locking Plate System
VariAx Foot Locking Plate System Operative Technique Foot & Ankle Trauma and Deformity Correction Polyaxial Locking Technology Comprehensive Calcaneal Fracture Plates VariAx 2 Plates VariAx Foot Locking
More informationVariAx Foot Locking Plate System
VariAx Foot Locking Plate System Operative Technique Trauma and Deformity Correction Polyaxial Locking Technology Comprehensive Calcaneal Fracture Plates Table of Contents 1. Introduction 3 2. Overview
More informationBioDrive Micro Screw System
At Biomet, engineering excellence is our heritage and our passion. For over 25 years, through various divisions worldwide, we have applied the most advanced engineering and manufacturing technology to
More informationVariable Angle LCP Mesh Plate 2.4/2.7. Part of the Variable Angle LCP Forefoot/Midfoot System 2.4/2.7.
Variable Angle LCP Mesh Plate 2.4/2.7. Part of the Variable Angle LCP Forefoot/Midfoot System 2.4/2.7. Surgical Technique This publication is not intended for distribution in the USA. Instruments and implants
More informationTechnique Guide. Synapse System. An enhanced set of instruments and implants for posterior stabilization of the cervical and upper thoracic spine.
Technique Guide Synapse System. An enhanced set of instruments and implants for posterior stabilization of the cervical and upper thoracic spine. Table of Contents Introduction Synapse System 2 AO Principles
More informationVariAxFibula. Fibula Fractures. Locking Plate System. Operative Technique
Foot and Ankle VariAxFibula Locking Plate System Operative Technique Fibula Fractures Distal Fibula Fracture Repair Polyaxial Locking Technology Low Profile Design VariAx Fibula Locking Plate System Contributing
More informationTechnique Guide. 4.5 mm Cannulated Screws. Part of the Synthes Cannulated Screw System.
Technique Guide 4.5 mm Cannulated Screws. Part of the Synthes Cannulated Screw System. TableofContents Introduction 4.5 mm Cannulated Screws 2 AO Principles 3 Indications 4 Surgical Technique Surgical
More informationP O L A R I S. H a n d & F o o t. Headless Screw System PRODUCT INFORMATION
P O L A R I S H a n d & F o o t Headless Screw System PRODUCT INFORMATION 2 POLARIS Hand & Foot Headless Screw System www.hnmtotal.com POLARIS HAND & FOOT Headless Screw System CONTENTS Headless Bone Screws
More informationTechnique Guide. Cable System. For Orthopaedic Trauma Surgery.
Technique Guide Cable System. For Orthopaedic Trauma Surgery. Table of Contents Introduction Overview 2 AO Principles 4 Indications and Contraindications 5 Surgical Technique Standard Cerclage Technique
More informationCervical Solutions. Lineum OCT. Spine System. Surgical Technique Guide
Cervical Solutions Lineum OCT Spine System Surgical Technique Guide 2 Lineum OCT Spine System Surgical Technique Guide Designed to encourage optimal screw placement and procedural efficiency Lineum OCT
More information3.5 mm Cannulated Screw Technique Guide
3.5 mm Cannulated Screw Technique Guide An Integral Part of the SYNTHES Cannulated Screw System Original Instruments and Implants of the Association for the Study of Internal Fixation AO ASIF The 3.5 mm
More information3.5 mm/2.7 mm LCP. Pancarpal Arthrodesis Plate. For treatment of carpal joints in dogs
3.5 mm/2.7 mm LCP Pancarpal Arthrodesis Plate For treatment of carpal joints in dogs Plate Design The DePuy Synthes Vet 3.5 mm/2.7 mm LCP Pancarpal Arthrodesis plate is intended for the treatment of hyperextension
More informationOptima ZS Spinal Fixation System
Surgical Technique Optima ZS Spinal Fixation System The low-profile, in-line, polyaxial pedicle screw system. Optima ZS Surgical Technique 1 Optima ZS Spinal Fixation System The Optima ZS Spinal Fixation
More informationBLACKBIRD Spinal System
BLACKBIRD Spinal System Cervical-Thoracic Spinal Fixation System The ChoiceSpine BLACKBIRD Cervical-Thoracic Spinal Fixation System is a comprehensive system for posterior fixation of the cervical and upper
More informationTable of Contents 2-6. Introduction. Indications Surgical Technique. Ordering Information 15-24
Table of Contents Introduction Product information ExtremiFix Midsize Large Screw Offering Headless Screw Characteristics Design Features & Benefits Instrumentation Technical Details Calibrated Drill Bits
More informationTechnique Guide. Modular Sternal Cable System. Flexibility and strength in sternal closure and repair.
Technique Guide Modular Sternal Cable System. Flexibility and strength in sternal closure and repair. Table of Contents Introduction Modular Sternal Cable System 2 Indications 4 Modular Sternal Closure
More information6.5 mm and 7.3 mm Cannulated Screws Technique Guide
6.5 mm and 7.3 mm Cannulated Screws Technique Guide An Integral Part of the SYNTHES Cannulated Screw System Original Instruments and Implants of the Association for the Study of Internal Fixation AO ASIF
More informationMaxAn Anterior Cervical Plate System
Surgical Technique MaxAn Anterior Cervical Plate System Designed to Help Minimize the Potential for Adjacent Level Ossification Allows for screw placement up to 30 cephalad on the superior end of the plate
More informationMINI INSTRUMENTS & IMPLANTS
Page 1 MINI INSTRUMENTS & IMPLANTS Page 2 JACOB CHUCK DRILL BITS MIS-001 1.1MM 45MM LENGTH MIS-002 1.5MM 70MM LENGTH MIS-003 2.0MM 85MM LENGTH MIS-004 2.7MM 85MM LENGTH QUICK COUPLING DRILL BITS MIS-005
More informationIntegra. HALLU -Lock M.T.P. Arthrodesis System SURGICAL TECHNIQUE
Integra HALLU -Lock M.T.P. Arthrodesis System SURGICAL TECHNIQUE Table of Contents... 02 Indications... 02 Contraindications... 02 Surgical Technique... 03 Step 1: Incision... 03 Step 2: Preparation of
More informationSpeedTip CCS 5.0, 7.0
SURGICAL TECHNIQUE STEP BY STEP SpeedTip CCS 5.0, 7.0 Cannulated Compression Screws APTUS 2 SpeedTip CCS 5.0, 7.0 Cannulated Compression Screws SpeedTip CCS 5.0, 7.0 Cannulated Compression Screw 3 SpeedTip
More informationOccipito-Cervical Fusion System. Implants and instruments designed to optimize fixation to the occiput.
Occipito-Cervical Fusion System. Implants and instruments designed to optimize fixation to the occiput. Technique Guide This publication is not intended for distribution in the USA. Instruments and implants
More information