TOOLS FOR THE SPECIALIST UNDERWATER TOOLS
|
|
|
- Annis Holland
- 5 years ago
- Views:
Transcription
1 TOOLS FOR THE SPECIALIST UNDERWATER TOOLS
2 PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces even under water. The exhaust air is discharged backwards through the working hose Disk dia. max , s R1/4 female AXIAL DIE GRINDER This grinder can be used for all small grinding work, also under water , Collet 6 Exhaustair guide rear Machine length R1/4 female 1.4 IMPACT WRENCHES Particularly developed for underwater application. Square drive for screws Max. torque* Order No. Nm /4 1 M30 M30 1,350 1, *The specified max. torque refers to screws of strength class 8.8 Distance centre/ outer edge R 1/2 female/ R 1/2 male R 1/2 female/ R 1/2 male CHAIN SAW This chain saw is the best tool for cutting wood also underwater ATEX Guideline 94/9 EC Housing material II2GcT5 aluminium Blade length 520 Blade length usable 430 without blade R 3/4 female 15 Chain brake time s < w/o blade and chain 8.5 CORE DRILLS The most powerful hydraulic and hand-operated core drill unit 160 drill diameter / 900 / 1, / 700 / 1, Torque Nm 49 / 31 / / 56 / (hight) Drill bits diameter R3/4 male R3/4 male
3 PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). DRILLS Handy and universally usable, drilling diameter, usable as well under water. Drill chuck (geared chuck) Speed capacitiy in steel , R1/4 female / R3/8 female R1/4 female / R3/8 female >10 > PISTOL HAMMER DRILL in concrete, stone, masonry, iron and steel is possible by easy start and stop of the impact mechanism - usable as well under water. Drill chuck (geared chuck) Speed capacitiy in steel/masonry / R1/4 female / R3/8 female > HAMMER DRILL - SDS-plus shank holder 28 in concrete. Impact mechanism can be switched on and off. Usable as well under water. ATEX Guideline 94/9 EC Blows per minute capacitiy in steel/masonry II2GcT ,000 28/ R1/2 female/ R3/8 female > HAMMER DRILL - SDS-max shank holder 50 in concrete. Impact mechanism can be switched on and off Blows per minute 2,500 capacitiy in steel/masonry 50/ R1/2 female/ hose fitting >
4 HYDRAULIC TOOLS 1/2 FF -Flat-Face coupling, ISO 16028, 1/2 BSP/BG2 Performance data at an operating pressure of 140 bar (cont. flow) AXIAL GRINDER This powerful hydraulic grinder is ideally suited for hard grinding work and for underwater work. only use consumables approved for the maximum, hydraulic hose set Operating pressure Collet Total length without hoses ,500 11,500 11, bar / SAE No. 8 (3/4 x16unf) SAE No. 8 (3/4 x16unf) SAE No. 8 (3/4 x16unf) AXIAL GRINDER ful hydraulic grinder with high removal rate, also for underwater work. The maximum diameter of the grinding disc is 200. Disk diameter max. Tool holder ,000 1,8 dia.20/m DRILL This hydraulic drill is safely operated with both hands, as well under water. Typ additionally reversible for drilling in wood Shank MT3 MT3 1/min Torque Nm capacity (in medium hard concrete) (in medium hard concrete 1), in wood 2) ) ) 2)
5 HYDRAULIC TOOLS 1/2 FF -Flat-Face coupling, ISO 16028, 1/2 BSP/BG2 Performance data at an operating pressure of 80/140 bar (cont. flow) RECIPROCATING SAWS - Industrial / Mining Design Our hydraulic reciprocating saw with powerful drive, increased cutting and safety lever control. ATEX Guideline 94/9 EC Housing material Valve Stroke Number of strokes Oil flow II2GcT5 aluminium aluminium twist lever S S SABRE SAW - Industrial Design The hydraulic sabre saw for hardest cutting demands with higher driving performance as well for underwater use. Cutting capacity wood steel Stroke Number Oil of strokes flow , female 6.0 HAMMER DRILL - SDS-plus shank 28 in concrete. Impact mechanismn can be switched on and off. Usable as well under water. Blows per minute capacity concrete/masonry Oil flow ,460 28/ /2 FF HAMMER DRILL - SDS-max shank 50 in concrete. Impact mechanism can be switched on and off. Usable as well under water Blows per minute 2,300 capacity concrete 50 Oil flow /2 FF
6 HYDRAULIC TOOLS 1/2 FF -Flat-Face coupling, ISO 16028, 1/2 BSP/BG2. Performance data at an operating pressure of 140 bar (cont. flow). IMPACT WRENCHES Universally usable hydraulic impact wrench, also for diving work. ATEX Guideline 94/9 EC Square drive for screws Max. torque* (adjustable) Nm II2GcT6 II2GcT6 3/4 1 M30 M30 1,700 1, *The specified max. torque refers to screws of strength class 8.8 Distance centre/outer edge IMPACT WRENCH ful hydraulic impact wrench, especially designed for underwater work. Square drive for screws Max. torque* (adjustable) Nm M36 2, *The specified max. torque refers to screws of strength class 8.8 Distance centre/outer edge CORE DRILL The most powerful hydraulic and hand-operated core drill unit 160 drill diameter. Torque (adjustable) (hight) Drill bits diameter / 900 / 1, Nm 60 / 37 / VERTICAL GRINDER Our powerful vertical grinder, the ideal machine for heavy-duty rough grinding and cutting work. *at 45 oil flow Disc dia. max ,600* 3.5 Tool holder dia / 5/8-11UNC /4-16 UNF 5.8
7 ACCESSORIES Grinding Wheels and Milling Cutters Cutting Wheels Grinding Wheels Mounting Pins Brushes Flap Grinding Wheels Milling Cutters Saw Blades Reciprocating Saw Blades Sabre Saw Blades quality: HSS HSS-SL carbide tipped with various T.P.I. and length. Drills type: Straight shank SDS-plus SDS-max Morse taper shank (MT) Quick-release Chucks Quick-release chucks allow quick changing of drill bits without using tools. Core Bits and Drill Rigs Specific for core drills Core bits of various types and for various applications Drill rigs allow drilling big diameters and at specific angles (as well spot drilling of pipes at required angles) Additional accessories for water cooling, i.e. an additional water tank, allow independent working from the distribution network. Sockets, Adapters and Extensions type: standard (short) special (long) non-sparking Focus on quality by relying on us. Clamps and Accessories for square cuts for: pipes profiles special shapes type: mechanic automatic special device: Magnet Clamp Device Suspension Device Individual suspension devices can be delivered for each machine. This makes work easier and allows comfortable handling of the machine. Ask for your individual solution.
8 GENERAL ACCESSORIES Safety Block The hydraulic safety block is used for reducing the input pressure of max. 350 bar (5000 psi) at max. volume flow of 50 L/min. ( gpm) to an output pressure of 80 bar (1160 psi). Service Units We custom-assemble mobile service units for your individual application and offer it with the machine. Hydraulic Oil Naturally, biodegradable oil is available on request for your maintenance unit or your hydraulic equipment. Hydraulic Pack We offer the appropriate hydraulic power pack for your individual application, powered by electric, gasoline or diesel driven motors. Care We recoend our special Multi-Oil-Spray for the maintenance of your machine. Transport case We offer transport cases for the comfortable and safe transport of your machine. Operating Instruction for Underwater Tools Before underwater operation Connect the hoses properly Test the machine for leakage Test all functions of the machine (drilling, blowing, all moving parts, valves)! After underwater operation Clean the machine Dry the machine with compressed air Spray all moving parts with Multi-Oil-Spray (or similar) For additional information see the special operating and maintenance manual. For long-life operation of the machine we recoend a general overhaul (after 3 months of use) made by SPITZNAS. Multi-Oil-Spray = Spitznas Part Number Maschinenfabrik GmbH, Fellerstraße 4, D Velbert, Germany Tel: +49-(0) Fax: +49-(0) sales@spitznas.com Internet: 03/14 E
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces
Blower Cutter Jig Saw Circular Saw Circular Saw Drill High Speed Drill High Speed Drill Mixer Hammer Drill Hammer Drill Demolition Hammer
Index M00 M00 M0801K M0901 M0920 M0921 M1902 M2300 M2401Z M3600 M3601 M3700 Cutter Drill Power Planer Compound Miter Saw Portable Cut-off Router Router (Plunge type) Trimmer 08 08 M4000 M4101 M4301 M5801
Product Overview. Electric Pneumatic Hydraulic. Concrete and Masonry Dust Collection Systems Hot Work Zone Tools
Electric Pneumatic Hydraulic Product Overview Metalworking Surface Finishing Surface Preparation Concrete and Masonry Dust Collection Systems Hot Work Zone Tools www.csunitec.com Metalworking In the shop
no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
Underwater Tool Section
Underwater Tool Section Tools for Underwater Construction, Salvage and Demolition Stanley Hydraulic Tools is a leading worldwide provider of underwater hydraulic tools to professional divers, marine maintenance,
Portable Hacksaws for Tough Duty
Portable Hacksaws for Tough Duty On-site cutting of pipe up to 30" OD and structural steel PORTABLE HACKSAWS Pneumatic Electric Hydraulic CS Unitec's power hacksaws offer a wide range of options for portable
Portable Hacksaws for Tough Duty
Portable Hacksaws for Tough Duty On-site cutting of pipe up to 30" OD and structural steel Pneumatic Electric Hydraulic CS Unitec's power hacksaws offer a wide range of options for portable cutting of
TRAV-L-CUTTER Pipe Cutter
TRAV-L-CUTTER Pipe Cutter Horizontal and vertical c utting Fast and accurate cutting and beveling Add mounting chain sections to fit larger diameters COLD CUTTING, COMPACT DESIGN, EASY SET-UP The Wachs
MASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
April 2018 Edition STANDARD DUTY
April 2018 Edition STANDARD DUTY INDUSTRIAL POWER TOOLS Index Angle Grinder 4 Belt Sander 4 Blower 6 Circular Saw 5 Compound Mitre Saw 5 Demolition Hammer 3 Drill 3 Jig Saw 5 Finishing Sander 4 Rotary
Compatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning Face clamping disc Ø 170 mm 3440295 Face clamping disc Ø 240 mm 3441352 Face clamping disc Ø 250 mm 3440552 Face clamping disc
March weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
Kawasaki engineered for Professionals. Power, Ergonomics and Design in Perfection. Kawasaki active and attractive at the Point of Sale.
POWER PRODUCTS Kawasaki engineered for Professionals Innovative and dynamic quality products - this was the ultimate goal for the development of this range of tools and machines for professional craftspeople
Compatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning TU 1503 TU 2004 TU 2304 TU 2404 TU 2506 TU 2807 D 320 TU 3209 D 330 D 360 TU 3610V TZ 4012 D 420 TU 4210V D 460 TU 4615V TZ 5216
Industrial Drill Chucks with Key. For Stationary Machines and Portable Drilling Machines. Diameter (mm)
Drilling Industrial Drill Chucks with Key For Stationary Machines and Portable Drilling Machines Specifically designed for stationary drilling, turning, milling and wood working machines The one-piece
TIMTOS 2017 EXHIBITS PROFILE
TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes
WORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
New Lineup H.O.: Makita Power Tools India Pvt. Ltd. Makita Service Centre: Chennai: Cochin: Delhi: Kolkata: Pune:
New Lineup 2018 CATALOGUE 2 Index 4- Belt Sander Blower Circular Saw Cutter 4 Demolition Hammer Die Grinder Drill/Hammer Drill 2- Finishing Sander Jig Saw Mixer Portable Cut-off 4 Power Planer Random Orbit
Drilling and Tapping. A Buyers Guide.
Drilling and Tapping A Buyers Guide www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence, maximising
Cutting Drilling & Tapping
Cutting Drilling & Tapping Section Dowel Drills - Brad Point.0mm ( W Point) C113 $..0mm ( W Point) C1137 $7.0 $.70.0mm ( W Point) C1138 $9.30 $8.0 8.0mm ( W Point) C1 $9.0 $8.0.0mm ( W Point) C1127 $9.0
Catalog Drilling & Tapping Consumables
Catalog 0 Drilling & Tapping Consumables MAGTRON MB0 MAG-DRILL The Magtron electro-magnetic drilling machine has been designed, developed and manufactured to the very highest standards to provide users
STC Hydraulic grinding milling machine for cylinder heads and blocks. BERCO S.p.A. A Company of ThyssenKrupp
STC 361-1300 Hydraulic grinding milling machine for cylinder heads and blocks A Company of ThyssenKrupp BERCO S.p.A. The machine and its executions - from grinding wheel to tool: 1 - from tool to milling
THE HARDEST GANG IN TOWN.
HAMMERS THE HARDEST GANG IN TOWN. When we do something, then we do it right. That is why our haers are how tools for craftspeople should be: robust, powerful and durable. Our complete range of haers is
Flame. Tree Pointed. Product Barcode Price Ø Length Shank Code
Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate
has many talents. The Uneo Drilling
Drilling Screwdriving Hammering The Uneo has many talents. Make it your home with the Uneo and Uneo Maxx from Bosch. The compact cordless rotary hammers with pneumatic hammer mechanism can hammer, drill
ACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
Handout Activity: HA012
Drills & drill bits Engines: Motive Power Types: Handout Activity: HA012 HA012-2 Student/Intern information: Name Date Class Drills & drill bits Summary Drills can be portable or bench mounted. A bench
Heavy Equipment Solutions
Heavy Equipment Solutions Because ensuring a leak-free solution is critical. It has to be Hydratight. For more than 100 years, Hydratight has provided world-class bolted joint solutions, assessing and
CM6200 MILLING MACHINE
CM6200 MILLING MACHINE PORTABLE ON - SITE MACHINING SOLUTIONS FOR LARGE FLANGE MACHINING Quality Machine Design Provides Rigid, Power-Packed Performance Extraordinarily rigid design ensures consistent,
Born For Professionals
WESCO Born For Professionals The WESCO is a brand of power tools with top-quality and competitive prices. It is the synonym for Durable tools, Intelligent Design, Reliable Brand and Competitive prices.
Born For Professionals WE ARE DIFFERENT!
WESCO Born For Professionals WE ARE DIFFERENT The WESCO is a brand of power tools with top-quality and competitive prices. It is the synonym for Durable tools, Intelligent Design, Reliable Brand and Competitive
HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand
HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand Ex GST Inc GST $3,790.00 $3,280.00 $4,358.50 $3,772.00 Special Ends 30/06/2018
Punktlandung. To the point. Leistungsspektrum. from a single source
Partner for Partner the professionals der Profis Punktlandung. To the point Das Pneumatic komplette tools Leistungsspektrum from a single source Flexible automation Pneumatic spindles a 15 000 100 000
CLAMPING TECHNOLOGY Individual special clamping tools
CLAMPING TECHNOLOGY Individual special clamping tools 1 QUALITY SINCE 1958 Know-how, the highest quality and first class engineering. We see ourselves as a system supplier and offer our customers a full
THe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered precision. empowered. A selection of our most popular products
THe BeST OF 2018 A selection of our most popular products THe BeST OF 2017 selection of of our our most most popular popular products products AA selection To view the complete complete range range visit
Drilling Chiselling Screwdriving Stirring
M+ SYSTEM: MACHINE AND ACCESSORIES PERFECTLY SYNCHRONISED FOR MAXIMUM PERFORMANCE. Even during the development phase at Metabo, machines and accessories are optimally adjusted and tested to complement
CSNC CARBIDE CIRCULAR SERIES
CSNC CARBIDE CIRCULAR SERIES HIGHLY EFFICIENT AND PRODUCTIVE HIGH SPEED CIRCULAR SAWING MACHINES CARBIDE SAWS DO THE WORK OF FIVE CONVENTIONAL FACTORY BAND SAWS, WITHOUT SACRIFICING QUALITY. GET THE CLOSE-CUT
TOOL CLAMPING SYSTEMS
TOOL CLAMPING SYSTEMS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter function
AL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity
AL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity Ex GST Inc GST $3,200.00 $3,680.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle Bore (mm):
Product Brochure For L682D. Description. Features. Auckland: (09)
AL-336D DELUXE - Centre Lathe 300 x 900mm Turning Capacity Includes Digital Readout, Quick Change Toolpost, Leadscrew Covers, Foot Brake & Cabinet Stand Ex GST Inc GST $5,200.00 $5,980.00 ORDER CODE: MODEL:
POWER TOOL ACCESSORY GUIDE
POWER TOOL ACCESSORY GUIDE TABLE OF CONTENTS METAL SAWZALL BLADES 3 WOOD SAWZALL BLADES & HACKZALL BLADES & BLADE KITS 4 SPECIALTY SAWZALL BLADES 5 HOLE SAWS & HOLE SAW KITS 6 SPECIALTY HOLE SAWS 7 THIN
ICFS ROTARY DRILL ISB 6 VR
ICFS ROTARY DRILL ISB 6 VR Chuck clamp range Weight ISB 6 VR 550 w 230 V 0-3000 RPM 0.6-06 mm 1.3 Kg Commodity - Impact drill Quantity- 1 Content- 1 N each of Rotary drill, Chuck key, Drilling range: Drilling
Sheet Metal Tools. by:prem Mahendranathan
Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill
Portable Magnetic Drilling Machines
Portable Magnetic Drilling Machines PORTABLE MAGNETIC DRILLS Fast, accurate hole cutting on the job site or in the shop! Designed for continuous operation, CS Unitec's portable magnetic drills are ideal
Ensat driving tools...
nsat driving tools... On this page, you can configure the optimum tool for your application. A configuration is provided in the following as an illustrative example. The article number is composed of two
CATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS
CATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS FERM PROFESSIONAL TOUGH TOOLS FOR THE PROFESSIONAL FERM, founded in 1965, is one of the leading European power tool brands. Our headquarters is based in
DUGARD. Machine Tools Since Dugard 52TT/52TTS Twin Spindle CNC Lathe Double Y axes, Servo Angular Driven Tool, Twin Built-In Spindles
DUGARD Machine Tools Since 1939 Double Y axes, Servo Angular Driven Tool, Twin Built-In Spindles www.dugard.com Designed for Precision Part Machining of; One-Hit Machining Automobile, motorcycle and bicycle
CNC TURNING CENTRES B1200-M-Y
CNC TURNING CENTRES B1200-M-Y Great versatility and superb chip removal. B1200 2-3 The family of BIGLIA B1200 lathes universally appreciated for their rigidity, accuracy and durability, has been designed
Royal Corporation, Chennai
+91-8071676709 Royal Corporation, Chennai https://www.indiamart.com/royalcorporation/ We are the trader of measuring instruments, cutting tools, lifting tools and magnetic tools. All our products find
Models 14CFS91-38NL 14CFS93-38NL 14CSL CNL92-51
Grinders and Burs Drills 300/440/660W Models 14CFS91-38NL 14CFS93-38NL 14CSL97-51 14CNL91-51 14CNL92-51 = ready for oilless use Series Model-no. Free Power Air Noise Air Recommended Standard accessories
KM3000 PORTABLE KEY MILL
KM3000 PORTABLE KEY MILL FEATURES SETUP & OPERATION COMPONENTS & ACCESSORIES TECHNICAL DATA Cut a new, full-depth, 6 inch (152 mm) keyway in less than 4 minutes.* The KM3000 Portable Key Mill is a simple,
RODIA Diamond Core Drilling Hand-Operated and Stationary Wet Drilling
Hand-Operated and Stationary Wet Drilling RODIADRILL Ceramic ECO Hand-operated and stationary wet drilling machine, drill Ø 6-67 mm Further developed for hand-operated and stationary wet drilling in the
The new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
HAND TOOLS TWEEZERS. vice - DRILL PRESS
Torque Wrenches & Inserts Clicking torque wrench with mount for interchangeable socket tools, rapid accurate setting using QuickSelect quick-action adjuster, with Quick Release safety lock, double stop
POWER CARVERS/ACCESSORIES
16 POWER CARVERS/ACCESSORIES Foredom Tools and Accessories Foredom No. 8 handpiece - slim handpiece. Chuck guard sleeve protects fingers and permits close work. Slides back when changing accessories. Includes
Annular Cutters Magnetic Drills Accessories. BY universal drilling & cutting equipment
BY universal drilling & cutting equipment Annular Cutters Magnetic Drills Accessories Universal Drilling & Cutting Equipment, LTD www.uniborusa.com usa@unibor.com From England s City of Steel Unibor, by
CHAPTER 52 ELECTRICAL POWER TOOLS
CHAPTER 52 ELECTRICAL POWER TOOLS HOW TO CHOOSE AND USE THEM The Types and Uses pages provide you with a list of the electrical power tools found in the pioneer tool outfit. These pages should help you
PUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
AL Centre Lathe 300 x 900mm Turning Capacity Includes Cabinet Stand
AL-336 - Centre Lathe 300 x 900mm Turning Capacity Includes Cabinet Stand Ex GST Inc GST $4,150.00 $4,565.00 ORDER CODE: MODEL: L682 AL-336 Swing Over Bed (mm): 300 Distance Between Centres (mm): 900 Spindle
Operating Manual. for CUTTING, PERFORATING, BENDING SLB120
Operating Manual for CUTTING, PERFORATING, BENDING SLB120 31040\B06eng 0896 0 Contents 1. Scope of delivery... 1 2. Technical specifications... 1 3. Applications... 1 4. Commissioning... 2 5. Cutting...
BBM 911. Dry drilling machine up to Ø 160 mm. hand guided. Versatile dry drilling machine for drilling up to Ø 160 mm
Dry drilling machine up to Ø 160 mm BBM 911 hand guided ADVANTAGES Sudden stop safety clutch Solid made housing, powder-coated die-cast aluminium for durability Versatile dry drilling machine for drilling
HM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand
HM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand Ex GST Inc GST $4,350.00 $3,990.00 $4,785.00 $4,389.00 Special
KTM-16/20 TECHNICAL DATA
TECHNICAL DATA Table Diameter : 1,600mm Max. Turning Diameter : 2,000mm Max. Turning Height : 1,750mm Table Indexing Degree : 0.001mm CNC Controller : FANUC 18i-TB ** Bed The bed has symmetrical structure
K E E P I N G T H E W O R L D I N M O T I O N TM P 90 G. Grinding and Hobbing Machine
K E E P I N G T H E W O R L D I N M O T I O N TM P 90 G Grinding and Hobbing Machine machine concept P 90 G three grinding methods + hobbing combined in one machine. The P 90 G is a new development based
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,470.00 $2,840.50 ORDER CODE: M123 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,600.00 $2,860.00 ORDER CODE: M124 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
Fast and flexible use Powerful results
Fast and flexible use Powerful results CORDLESS DRILLS AND BITS DRILL BIT GUIDE Turbo Stone Brad Point Bit Flat Wood Bit Lewis Auger Bit HSS-G Super-Pro Twist Drill Multimat Allmat Ceramic Master Concrete
Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2
TOOLS Page Q 2 Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2 Page Q 3 Changeable carbide drill (WHM) Page Q 3/1 Drilling machine Tonisco
VHF 2 VHF 2. Vertical Milling Machine
Vertical Milling Machine VHF - ideal series for mechanic workshops, training, single part and replacement part manufacturing, and prototyping including 3-axis position indicator travel x-axis 600 mm y-axis
TU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head
TU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head Package Deal Ex GST Inc GST $3,980.00 $4,577.00 Package Contents - SAVE $402.50 (Inc) 1 x L691
TU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head
TU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head Package Deal Ex GST Inc GST $3,850.00 $4,235.00 Package Contents - SAVE $209.00 (Inc) 1 x L691
VSG4720. balancing. block machining. boring. cleaning. crankshaft. cylinder head machining. flywheel grinders. honing. motorcycle small engine
TM engine rebuilding equipment balancing block boring cleaning crankshaft cylinder head flywheel grinders honing motorcycle small engine surfacing center center versatility New capabilities Tooling adapters
Artikel-Nr.:
CXMT 135; EX; UK Grinding and Engraving Tool Artikel-Nr.: 4419179 Ident-Nr.: 01018 Komponenten / Ersatzteile Position Artikel-Nr. Beschreibung 1 441917001006 nut 2 441917001008 fix pin 5 441917001011 screw
Professional Power Tools & Accessories
Professional Power Tools & Accessories NEW Engine and outputs sold separately. 6.5HP 3L 20cm Ø 3150min -1 2.4KW (50Hz) 10.5A (230V) 21A (110V) 230V (16A) BS4343 AC 175 Bar 6m 8L / in 1L Powered by 75mm
Power Tool Accessories
Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Masonry Diamond Cutting Diamond Cutting Blades Milwaukee Diamond Cutting Blades are designed to the highest standards only using quality diamonds.
Following these simple instructions will ensure a long life of excellent operation. Note that this tool needs generous lubrication.
2008 --------------------------------------------------------------- IPT Technologies AB -------------------------------------------------- HRV-601A Scaler/Chipper is very powerful but our advanced, patented
Portable Magnetic Drilling Machines
Fast, accurate hole cutting on the job site or in the shop! Designed for continuous operation, CS Unitec's portable magnetic drills are ideal for drilling structural steel and virtually any metal. We offer
Operating and Maintenance Instructions
!! Operating and Maintenance Instructions Keep for future reference PTO400 Log Splitter 1 Index INDEX...2 SAFETY...3 LABELS..4 QUICK GUIDE including storage and transport... 5 IN DEPTH INSTRUCTIONS...
IWB-12 - Industrial Work Bench
IWB-12 - Industrial Work Bench 1200 x 750 x 900mm 1000kg Load Capacity Ex GST Inc GST $270.00 $297.00 ORDER CODE: A415 MODEL: Type: IWB-12 Steel with Laminated Top Table Top Load Capacity (kg): Number
H8508 Impact Wrench SERVICE MANUAL. Model (Serial Code FWN) Model (Serial Code FWP)
SERVICE MANUAL H8508 Impact Wrench Model 48755 (Serial Code FWN) Model 48760 (Serial Code FWP) Read and understand all of the instructions and safety information in this manual before operating or servicing
HC Hydraulic Expansion Chucks
Technical Information HC Hydraulic Expansion Chucks design, function, effect, and application features, handling, and action application instructions precision tool length setting torques accessories sealed
Clamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292
HAND AND POWER TOOLS
HAND AND POWER TOOLS Steingass Mechanical Contracting, Inc. 754 Progress Drive Medina, Ohio 44256 (330) 725-6090 HAND AND POWER TOOLS General All power tools whether furnished by Steingass Mechanical Contracting,
grinding technologies
grinding technologies SPECIAL OFFERS February 2013 MX150 1500 KNIFE GRINDER MX150 1500 Knife grinder Magnetic chuck 1500*120mm; PLC controlling automatic down-feed, automatic working cycle, spark-out and
Perfect sawing. The complete FEIN program for sawing: Jigsaws P Hacksaws P With the FEIN sabre saw through thick and thin with ease.
FEIN Sawing 222 Perfect sawing. FEIN Jigsaws are characterised by their high performance under tough operating conditions. They saw vertically and horizontally in metal, wood and plastics (including fibreglass).
Cross Peen Hammer. Introduction. Lesson Objectives. Assumptions
Introduction In this activity plan students will develop various machining and metalworking skills by building a two-piece steel hammer. This project will introduce basic operations for initial familiarization
Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY
TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form
College of Forestry 610: Power Tools
College of Forestry 610: Power Tools Safety Policy & Procedure Manual Section 600: Workshops and Shop Tools Effective: 01 January 2007 Revised: August 2014 PURPOSE The purpose of this section is to provide
PRESSURE WASHER GENERATOR SANDER BENCH GRINDER
MACHINERY/S E-001-086 2066-0 5.5 HP 4 - Stroke Engine E-001-084 2067-0 5.5 HP OHV E-001-095 2068-0 6.5 HP OHV E-01-100 2061-0 3500W Portable Generator, 4000W peak power, 196cc OHV engine GENERATOR E-001-222
Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
ACCESSORIES MAG DRILLS ANNULAR CUTTERS ACCESSORIES. MagDrill Accessories. Part # Description /2 chuck with annular adapter for drill bits
ACCESSORIES MagDrill Accessories Part # Description 3164182 1/2 chuck with annular adapter for drill bits 3164183 3/4 chuck & key with #3 morse taper 3233334 5/8 chuck & key with #2 morse taper 3164184
PRODUCTION OF SUPPERIOR QUALITY COMPONENTS
High end power tools PRODUCTION OF SUPPERIOR QUALITY COMPONENTS 4 5 6 ROTARY HAMMER SDS MAX HD 45 1 Control device to select the machine functions (drill, percussion - drill and percussion). 2 Rod percussion
Complete O.D. Machining in One Operation
MFDODM209 Complete O.D. Machining in One Operation Including: Hydra-Drive For Extreme Accuracy CREATING INNOVATIONS IN FACE DRIVING TECHNOLOGY www.facedrivers.com Complete O.D. Machining in one Operation
ACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through
WTC Industrial Mobile Tooling Cabinet Workstation
WTC-1450 - Industrial Mobile Tooling Cabinet Workstation 1170 x 580 x 1450mm 100kg per Drawer Ex GST Inc GST $1,050.00 $1,155.00 ORDER CODE: MODEL: T773 WTC-1450 Number of Drawers (No.): 5 Drawer Load
Wheeler Rex Ashtabula, Ohio Tel: Fax:
Wheeler Rex Ashtabula, Ohio Tel: 800 321 7950 Fax: 440 992 2925 wheeler@wheelerrex.com www.wheelerrex.com December 2012 There are three different types of shell cutters. Nominal Hole Size Part No. 4" 3395
Wettstein Tool TECHNOLOGIES. Milling Accessories. No. A C Air Collet Fixture. Manufacturers of Specialty TECHNOLOGIES INC.
Wettstein Tool Milling Accessories No. A1 212 5C Air Collet Fixture For use with standard Hardinge 5C Collets. Designed especially for high production applications. Their light weight and compact size
D25122(K) D25123(K) D25124(K) D25213(K)
D25122(K) D25123(K) D25124(K) D25213(K) English 6 Copyright DEWALT 2 3 1 5 4 9 7 6 11 10 D25213 5 4 3 9 7 6 11 10 1 2 D25123 8 4 A D25122 D25124 3 5 4 6 B1 5 4 7 12 B2 C 10 9 11 D 4 E 3 3 F1 F2 6 8 13
Machine Tool Technology/Machinist CIP Task Grid Secondary Competency Task List
1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 2 2 2 1 0.5 102 Identify & explain safety equipment and procedures.