THE HARDEST GANG IN TOWN.

Transcription

1 HAMMERS THE HARDEST GANG IN TOWN. When we do something, then we do it right. That is why our haers are how tools for craftspeople should be: robust, powerful and durable. Our complete range of haers is shown on the following pages. You are certain to find your power package for the toughest applications: Metabo. Work. Don t play. 12

2 HAMMERS 13

3 HAMMERS LET THE MACHINE DO THE WORK. Metabo has one of, if not the widest SDS haer range impacts allowing the user to effortlessly drive the bit in the market. Our haers hit hard and are perfect for or chisel into masonry. Metabo haers are versatile, working in hard materials such as stone or concrete. The robust, ergonomic, powerful and reliable, all properties pneumatic haer mechanism generates high-energy that the trade demands. Control indicator To prevent unintentional restart and brush wear. Rubber-coated handle For fatigue-free work. Vario Tacho Constamatic (VTC) electronics For the pre-selection and maintenance of the speed. Marathon motor with coil guard The special coil guard and the epoxy resin powder coating on the coil winding makes the motor completely impervious to harmful dust. The Metabo coil guard also provides extra protection against the abrasive effect of dust. Metabo Quick drill chuck change haer chuck for SDS drilling and chiselling Quick-action keyless chuck for drilling and screw-driving Metabo S-automatic torque limiting clutch For limiting any sudden reverse torque. Die cast aluminium gear housing Increases the service life of the machine. The machine is more robust and dissipates heat faster. Infinitely variable speed control Always the right speed. Depending on the workpiece and the material. More intelligent drilling with Metabo Contact The tool stops automatically as soon as the drill tip touches a conductive, earthed material (only in KHE 26 Contact). 14 Protection against theft by Metabo The electronic security system protects against theft and unauthorised use. More relaxed working due to ergonomics Ideal adaptation of the design to the user s needs enables safe, comfortable and fatiguefree work. Optimised haer mechanism The already tried and tested Metabo haer mechanism has been adapted for the Marathon motor and even further improved. This ensures maximum drilling performance.

4 HAMMERS Which is the right rotary haer for you? Haer drilling in concrete/stone (Ø ) Multihaers Rotary haers Combination haers Chipping haers ideal range possible range Drilling in metal wood max. Ø 13/8 30/20 1 st /2 nd Gear 16/8 40/20 1 st /2 nd Gear Chiselling light heavy Type and output UHE 22 Multi 2,2 J UHE 28 Multi 2,4 J NEW BHE Compact 1,6 J BHE ,8 J BHE ,2 J BHE ,3 J KHE 26 2,3 J KHE Contact 2,3 J 19 KHE 28 2,5 J KHE 32 3,5 J KHE 55 9 J 24 KHE J Variants Page 24 MHE J MHE J HEDGE SPECIAL ROUTERS SANDING ANGLE SCREW- CORDLESS METABOXES TRIMMERS MACHINES SAWS AND PLANERS MACHINES GRINDERS DRIVERS DEVICES DRILLS IMPACT DRILLS HAMMERS 15

5 MULTIHAMMERS EQUIPMENT FEATURES Suitable for bits and accessories with SDS Plus shank end or cylindrical shaft (without impact) Haer stop Rotation stop Metabo "Quick" drill chuck change Clockwise and anticlockwise rotation Thumbwheel for preselection of speed Robust Metabo Marathon motor Two-speed gear unit Pneumatic high-performance haer mechanism Die cast aluminum gear housing Ergonomic housing design for fatigue-proof operation Rubber-coated handle Rubber coated additional handle with drill depth-stop Metabo S-automatic torque limiting clutch Metabo winding protection grid Auto-stop carbon brushes... with the Metabo system, protects against theft and unauthorised use at the touch of a button You can find the Metabo cordless rotary haers for working without cables on page 78. UHE 22 Multi UHE 28 Multi Multi-Purpose Haer UHE 22 Multi Multi Purpose Haer UHE 28 Multi Special advantages Metabo system: electronic anti-theft system, activated by key (accessory) Variospeed (V) electronics Vario Tacho Constamatic (VTC) full-wave electronics Overload protection No-volt release switch Brush wear indicator Comparative device characteristics Torque 15 Nm/6 Nm 22 Nm/8 Nm Drilling diameter in - Concrete with haer bits Brickwork with drill bits 80 - Steel 13 /8 16 /8 - Softwood 30 /20 40 /20 No-load speed / /min 0-950/ /min Rated input power 705 W W Output power 410 W 600 W Rated load speed 700/1.900 /min 950/2.600 /min Maximum impact rate /min /min Single-blow energy 0-2,2 J 0-2,4 J Collar diameter Bit retainer SDS Plus SDS Plus Chuck capacity 1,5-13 m 1,5-13 Weight 2,7 kg 2,8 kg Standard equipment Haer chuck for tools with SDS Plus shank bit, quick-action keyless chuck for tools with cylindrical shafts, additional handle, drill depth stop, carry case Haer chuck for tools with SDS Plus shank bit, quick-action keyless chuck for tools with cylindrical shafts, additional handle, drill depth stop, carry case Type UHE 22 Multi UHE 28 Multi

6 ROTARY HAMMERS EQUIPMENT FEATURES Suitable for bits and accessories with SDS Plus shank bit With the appropriate accessories, it is also suitable for bits and accessories with straight shafts (no impact) Haer stop Clockwise and anticlockwise rotation Variospeed (V) electronics Pneumatic high-performance haer mechanism Sheathed die cast aluminium gear housing Optimum weight distribution by L shape Comparative device characteristics Torque 8 Nm Drilling diameter in - Concrete with haer bits 20 - Steel 10 - Softwood 20 No-load speed /min Rated input power 450 W Output power 150 W Rated load speed 800 /min Maximum impact rate /min Single-blow energy 0-1,6 J Weight (without mains cable) 2,1 kg Standard equipment Type Accessories BHE 20 Compact NEW Electronic Rotary Haer BHE 20 Compact Haer chuck for tools with SDS Plus shank bit, additional handle, plastic case BHE 20 Compact Scaffolding hook Scaffolding hook with simple snapon connection for hanging the machine securely on scaffoldings or ladders etc Ergonomic housing design for fatigue-proof operation Rubber-coated handle Additional VibraTech handle for vibration damping Metabo S-automatic torque limiting clutch Scaffolding hook (accessory) for hanging the machine on scaffoldings or ladders HEDGE SPECIAL ROUTERS SANDING ANGLE SCREW- CORDLESS METABOXES TRIMMERS MACHINES SAWS AND PLANERS MACHINES GRINDERS DRIVERS DEVICES DRILLS IMPACT DRILLS HAMMERS 17

7 ROTARY HAMMERS EQUIPMENT FEATURES Suitable for bits and accessories with SDS Plus shank bit With the appropriate accessories, it is also suitable for bits and accessories with straight shafts (no impact) Haer stop Clockwise and anticlockwise rotation Robust Metabo Marathon motor Pneumatic high-performance haer mechanism Die cast aluminum gear housing Ergonomic housing design for fatigue-proof operation Rubber-coated handle Rubber coated additional handle with drill depth-stop Metabo S-automatic torque limiting clutch Metabo winding protection grid Auto-stop carbon brushes... with the Metabo system, protects against theft and unauthorised use at the touch of a button BHE 22 BHE 24 BHE 26 Electronic Rotary Haer BHE 22 Electronic Rotary Haer BHE 24 Electronic Rotary Haer BHE 26 Special advantages Metabo system: electronic anti-theft system, activated by key (accessory) Metabo "Quick" drill chuck change Variospeed (V) electronics Vario Tacho Constamatic (VTC) full-wave electronics no-volt release switch brush wear indicator Comparative device characteristics Torque 11 Nm 11 Nm 16 Nm Drilling diameter in - Concrete with haer bits Steel Softwood No-load speed /min /min /min Rated input power 660 W 705 W 750 W Output power 370 W 410 W 430 W Rated load speed 750 /min 750 /min /min Maximum impact rate /min /min /min Single-blow energy 0-1,8 J 0-2,2 J 0-2,3 J Weight (without mains cable) 2,4 kg 2,4 kg 2,6 kg Standard equipment Haer chuck for tools with SDS Plus shank bit, additional handle, drill depth stop, plastic case Haer chuck for tools with SDS Plus shank bit, additional handle, drill depth stop, plastic case Haer chuck for tools with SDS Plus shank bit, additional handle, drill depth stop, plastic case Type BHE 22 BHE 24 BHE

8 COMBINATION HAMMERS EQUIPMENT FEATURES Suitable for bits and accessories with SDS Plus shank bit With the appropriate accessories, it is also suitable for bits and accessories with straight shafts (no impact) Haer stop Rotation stop Clockwise and anticlockwise rotation Metabo "Quick" drill chuck change Robust Metabo Marathon motor Pneumatic high-performance haer mechanism... with the Metabo system Special advantages Metabo "Contact" Technology Metabo system: electronic anti-theft system, activated by key (accessory) Vario Constamatic (VC) full-wave electronics Vario Tacho Constamatic (VTC) full-wave electronics Thumbwheel for preselection of speed Die cast aluminum gear housing Ergonomic housing design for fatigue-proof operation Rubber-coated handle R ubber coated additional handle with drill depth-stop Metabo S-automatic torque limiting clutch Metabo winding protection grid Auto-stop carbon brushes Brush wear indicator KHE 26 KHE 26 Contact KHE 28 No-volt release switch Comparative device characteristics Torque 16 Nm 16 Nm 20 Nm Drilling diameter in - Concrete with haer bits Concrete with milling bits - Brickwork with drill bits No-load speed /min /min /min Rated input power 800 W 800 W W Output power 450 W 450 W 610 W Rated load speed /min 830 /min /min Maximum impact rate /min /min /min Single-blow energy 0-2,3 J 0-2,3 J 0-2,5 J Collar diameter Bit retainer SDS Plus SDS Plus SDS Plus Weight (without mains cable) 2,7 kg 2,7 kg 2,7 kg Standard equipment... with the Metabo system, protects against theft and unauthorised use at the touch of a button Electronic Combination Haer KHE 26 Haer chuck for tools with SDS Plus shank bit, additional handle, drill depth stop, carry case Electronic Combination Haer KHE 26 Contact Haer chuck for tools with SDS Plus shank bit, additional handle, drill depth stop, carry case Electronic Combination Haer KHE 28 Haer chuck for tools with SDS Plus shank bit, additional handle, drill depth stop, carry case Type KHE 26 KHE 26 Contact KHE HEDGE SPECIAL ROUTERS SANDING ANGLE SCREW- CORDLESS METABOXES TRIMMERS MACHINES SAWS AND PLANERS MACHINES GRINDERS DRIVERS DEVICES DRILLS IMPACT DRILLS HAMMERS 19

9 COMBINATION HAMMERS EQUIPMENT FEATURES Suitable for bits and accessories with SDS Plus shank bit With the appropriate accessories, it is also suitable for bits and accessories with straight shafts (no impact) Haer stop Rotation stop Metabo system: electronic anti-theft system, activated by key (accessory) Clockwise and anticlockwise rotation Metabo "Quick" drill chuck change Vario Tacho Constamatic (VTC) full-wave electronics Robust Metabo Marathon motor Pneumatic high-performance haer mechanism Die cast aluminum gear housing Rubber-coated handle Rubber coated additional handle with drill depth-stop Torque limiting clutch Auto-stop carbon brushes Brush wear indicator... with the Metabo system, protects against theft and unauthorised use at the touch of a button KHE 32 Electronic Combination Haer KHE 32 Comparative device characteristics Torque 25 Nm Drilling diameter in - Concrete with haer bits 32 - Brickwork with drill bits 80 No-load speed /min Rated input power 900 W Output power 480 W Rated load speed 780 /min Maximum impact rate /min Single-blow energy 0-3,5 J Bit retainer SDS Plus Weight (without mains cable) 3,5 kg Standard equipment Haer chuck for tools with SDS Plus shank bit, additional handle, drill depth stop, carry case Type KHE

10 COMBINATION HAMMERS, CHISEL HAMMERS ACCESSORIES WITH SDS PLUS SHANK END UHE 22 Multi, UHE 28 Multi, BHE 20 Compact, BHE 22, BHE 24, BHE 26, KHE 26, KHE 26 Contact, KHE 28 and KHE 32 Carbide haer drill bit, SDS Plus, "pro 4", 2 cutters Latest generation carbide: long service life, quicker, no problem when cutting on steel reinforcements. The new cutting geometry on the chisel-shaped bit heat ensures quick penetration in the toughest concrete and in granite. Easy centring. The new 4-spiral helix with its large geometry ensures quick delivery of bore dust, reduces friction in drilled hole, improves the vibration behaviour. For use in concrete, masonry, natural stone with UHE 22 Multi, UHE 28 Multi, KHE 26, KHE 26 Contact, KHE 28 and KHE 32 Working length or Packing unit Self-service packaging , , , , , , , , Other tools with SDS Plus shank bit for haer drill bits with ratio thread Tools for non-impact work Tools for non-impact work Working length Carbide haer drill bit with SDS Plus shank bit Packing unit Packed loosely HEDGE SPECIAL ROUTERS SANDING ANGLE SCREW- CORDLESS METABOXES TRIMMERS MACHINES SAWS AND PLANERS MACHINES GRINDERS DRIVERS DEVICES DRILLS IMPACT DRILLS HAMMERS 21

11 COMBINATION HAMMERS, CHISEL HAMMERS Working length Packing unit Carbide-tipped haer drill bit, SDS Plus, 2 cutters Working length Packing unit Carbide-tipped haer drill bit, SDS Plus, "pro 4" The slim, chisel-shaped bit head enables fast penetration into the material to be drilled The continuous core reinforcement ensures stability and durability. It enables maximum energy transmission from haer to drill tip. Friction and vibration are reduced and user and machine are relieved by the narrow back spacers State-of-the-art thermal treatment and surface sealing by shotblasting ensure the prevention of wear on surfaces and make the drill resistant against bending For use in concrete, masonry, natural stone 4-piece, in small plastic case Ø 5, 6, 8,10, L = 110/160 5-piece, in small plastic case Ø 5, 6, 6, 8, 10, L = piece, in small metal case Ø 5, 6, 6, 8, 8, 10, 12, L = 110/160/ Working length Packing unit Carbide-tipped haer drill bit, SDS Plus, 4 cutters Syetrical construction of the head with main and auxiliary cutters ensures centric guiding in the drill hole and reduces friction, meaning longer life for the drill Quick boring dust discharge through short spiral inlets and large boring dust grooves of optimised double delivery helix The 4-cutter geometry protects the drill on contacting iron reinforcement and helps prevent damage to the bit head For use in concrete, masonry, natural stone Chisel with SDS-Plus shank end Chisel shape 5-piece, combo plastic case Ø 6, 8, 10 haer drill bit, pointed chisel ( ), flat chisel ( ) Cutting width Pointed chisels, round tip Pointed chisels, square tip Flat chisels Scaling chisels Chasing gouges Joint chisels, carbidetipped Joint chisels, carbidetipped Tile chisels, offset

12 COMBINATION HAMMERS, CHISEL HAMMERS Chisel assortment with SDS Plus shank end Chiselling attachment SDS Plus drill bit/chiselling bit set (5-piece) consisting of haer drill bits of Ø 6, 8, 10 (1 each), 1 pointed chisel ( ) and 1 flat chisel ( ) Plastic round box SDS Plus chiselling bit set (3-piece) comprising 1 pointed chisel ( ), 1 flat chisel ( ) and 1 scaling chisel ( ) each Plastic round box SDS Plus chiselling bit set (5-piece) comprising 2 pointed chisels ( ), 2 flat chisels ( ) and 1 scaling chisel ( ) Plastic round box In order to work without rotary motion with the chisels , , , , , and you must use the chiselling attachment Carbide-tipped core cutters, M 16 female thread Optimised with larger carbide-tipped teeth for longer service life. Higher power efficiency due to stably, thin-walled bit body. For concrete and masonry Working length Carbide-tipped pilot drill for core cutters NEW Anchor-head holders with M14 male thread Anchor-head holder SW 11 : 78 Anchor-head holder SDS Plus : 105 Anchor-head holder SDS Plus : Accessories Connection piece with 1/2"-20 UNF thread for the holder bit for haer drill bits with ratio thread and core cutters Connection piece for haer drill bits with ratio thread and for fitting the core bit using the pilot drill Connection piece with thread 1/2"-20 UNF for drill chuck and hexagon socket recess 1/4" (6.35 ) for screwdriver bits with bit retaining bush Bit retaining bush for fitting bits and sockets with 1/4" (6.35 ) hexagon in the spindle of drills and impact drills with spindle thread 1/2" -20 UNF and hexagon socket recess 1/4" (6.35 ) Geared chuck Clamping width: 1,5-13 Female thread: 1/2" -20 UNF Key size: 2 Integral chuck for rotary haers Accessories SDS Plus haer chuck for accessories with SDS Plus shank end (UHE 22, UHE 28 Multi, BHE 24, BHE 26, KHE 26 Contact, KHE 28) Quick-action keyless chuck with adapter for accessories with cylindrical shank end (UHE 22, UHE 28, BHE 24, BHE 26, KHE 26, KHE 26 Contact, KHE 28) Capacity: Geared chuck with adapter for accessories with cylindrical shank end (UHE 22, UHE 28, BHE 24, BHE 26, KHE 26, KHE 26 Contact, KHE 28) Capacity: SDS Plus haer chuck for accessories with SDS Plus shank end (for KHE 32) Quick-action keyless chuck with adapter for accessories with cylindrical shank end (for KHE 32) Chuck capacity: 1-13 Code! Key for protection of Metabo machines (with configuration) from misuse Theh complete Metabo tool park (with configuration) can be protected with a single protected with key Safety goggles with non-fogging lens Replacement lens for safety goggles Special grease for tool shank end for shank ends of haer bits, chisels, adapters, ; prevents friction and wear coefficient; bio-degradable high resistance to aging, high resistance to heat, high anti-corrosion properties HEDGE SPECIAL ROUTERS SANDING ANGLE SCREW- CORDLESS METABOXES TRIMMERS MACHINES SAWS AND PLANERS MACHINES GRINDERS DRIVERS DEVICES DRILLS IMPACT DRILLS HAMMERS 23

13 COMBINATION HAMMERS EQUIPMENT FEATURES Suitable for bits and accessories with SDS-max shank bit With the appropriate accessories, it is also suitable for bits and accessories with spline shank bit or ratio thread R otation stop Metabo system: electronic anti-theft system, activated by key (accessory) Vario Tacho Constamatic (VTC) full-wave electronics Thumbwheel for preselection of speed Pneumatic high-performance haer mechanism Magnesium die cast gear housing Dust seal protects from the finest dust particles Ergonomic housing design for fatigue-proof operation Rubber-coated handle Torque limiting clutch Auto-stop carbon brushes... with the Metabo system, protects against theft and unauthorised use at the touch of a button... with the Metabo system, protects against theft and unauthorised use at the touch of a button KHE 55 KHE 75 Electronic Combination Haer KHE 55 Electronic Combination Haer KHE 75 Special advantages Extra handle with drill depth-stop Brush wear indicator Comparative device characteristics Torque 60 Nm 65 Nm Drilling diameter in - Concrete with haer bits Concrete with milling bits Brickwork with drill bits No-load speed /min /min Rated input power W W Output power 590 W 690 W Rated load speed 275 /min 280 /min Maximum impact rate /min /min Single-blow energy 1-9 J 1-10 J Collar diameter Bit retainer SDS-max SDS-max Weight (without mains cable) 5,9 kg 6,4 kg Standard equipment Additional handle, drill depth stop, lubricant for tool shank end, duster, carry case Additional handle, drill depth stop, lubricant for tool shank end, duster, carry case Type KHE 55 KHE

14 CHIPPING HAMMERS EQUIPMENT FEATURES Suitable for bits and accessories with SDS-max shank bit Metabo system: electronic anti-theft system, activated by key (accessory) Vario Tacho Constamatic (VTC) full-wave electronics Thumbwheel for preselection of impact rate Pneumatic high-performance haer mechanism Magnesium die cast gear housing Ergonomic housing design for fatigue-proof operation... with the Metabo system, protects against theft and unauthorised use at the touch of a button Special advantages Dust seal protects from the finest dust particles Chisel can be fixed in 8 positions Chisel can be fixed in 12 positions Brush wear indicator MHE 65 MHE 95 Comparative device characteristics Rated input power W W Output power 690 W 750 W Maximum impact rate /min /min Single-blow energy 1-10 J 5-25 J Bit retainer SDS-max SDS-max Weight (without mains cable) 5,7 kg 9,8 kg Standard equipment Electronic Chipping Haer MHE 65 Stoppable switch Rubber-coated handle Auto-stop carbon brushes Additional handle 360 rotatable... with the Metabo system, protects against theft and unauthorised use at the touch of a button Pointed chisel, additional handle, lubricant for tool shank end, duster, plastic case Electronic Chipping Haer MHE 95 Pointed chisel, additional handle, lubricant for tool shank end, duster, plastic case Type MHE 65 MHE HEDGE SPECIAL ROUTERS SANDING ANGLE SCREW- CORDLESS METABOXES TRIMMERS MACHINES SAWS AND PLANERS MACHINES GRINDERS DRIVERS DEVICES DRILLS IMPACT DRILLS HAMMERS 25

15 COMBINATION HAMMERS, CHISEL HAMMERS ACCESSORIES WITH SDS-MAX SHANK END for carbide-tipped haer drills with sds plus shank bit for carbide-tipped haer drills with splined shank bit Carbide haer drill bit, SDS-max, 4 blades Carbide haer drill bit, SDS-max, 2 blades Syetrical construction of the head with main and auxiliary cutters ensures centric guiding in the drill hole and reduces friction, meaning longer life for the drill Short spiral inlets and large boring dust grooves in the optimised double delivery helix ensure quick boring dust discharge. Maximum energy transfer due to dynamic core strengthening. The additional 2 auxiliary cutters protect the drill on contacting iron reinforcement and helps prevent damage to the bit head. For use in concrete, masonry, natural stone Working length Syetrical construction of the head with main and auxiliary cutters ensures centric guiding in the drill hole and reduces friction, meaning longer life for the drill Short spiral inlets and large boring dust grooves in the optimised double delivery helix ensure quick boring dust discharge. Maximum energy transfer due to dynamic core strengthening. For use in concrete, masonry, natural stone Working length Carbide-tipped drill bits (one-piece) with SDS-max Chisel with SDS-max shank Chisel shape Cutting width Pointed chisels, round tip Pointed chisels, round tip Pointed chisels, round tip Flat chisels Flat chisels Flat chisels

16 COMBINATION HAMMERS, CHISEL HAMMERS Chisel shape Cutting width Scaling chisels Scaling chisels Scaling chisels Chasing gouges Channel chisels Tile chisels, offset Toothed chisels Mortar chisels Spade chisels Asphalt cutters Gouge chisels Stake drivers , Stake drivers Tool holder Stocker plate 45 x 45, 7 x 7 teeth Stocker plate 45 x 45, 5 x 5 teeth Stamper plate 150 x 150 Chisel assortment with SDS-max shank bit SDS-max chisel bit set (5-piece) comprising 2 pointed chisels ( ), 2 flat chisels ( ) and 1 scaling chisel ( ) Plastic round box SDS-max chisel bit set (5-piece) comprising 3 pointed chisels ( ), 2 flat chisels ( ) Plastic round box Connection pieces Connection piece SDS-max/ SDS Plus Connection piece SDS-max/ spline shank Connection piece spline shank/ SDS-max Connection piece spline shank/ SDS Plus ACCESSORIES WITH RATIO THREAD Carbide-tipped drill bits with ratio thread Anchor-head holder for carbide-tipped milling bits with ratio female and male thread Ratio threaded peg Carbide-tipped core cutters with ratio thread Sturdy universal tool for hard work in concrete and other building materials Working length Pilot drill for ratio thread Connection pieces Pilot drill 12 x 155, ratio thread for work with the carbide-tipped core cutters with ratio thread Connection piece SDS-max/ ratio Connection piece with ratio female thread and SDS-max shank bit, length 195, for the anchorhead holder of milling bits and for mounting drilling bits with the help of the centring drill Connection piece, SW 19/ ratio HEDGE SPECIAL ROUTERS SANDING ANGLE SCREW- CORDLESS METABOXES TRIMMERS MACHINES SAWS AND PLANERS MACHINES GRINDERS DRIVERS DEVICES DRILLS IMPACT DRILLS HAMMERS 27

17 COMBINATION HAMMERS, CHISEL HAMMERS ACCESSORIES WITH HEXAGON SHANK END Carbide-tipped haer drill bit with hexagon shank end, SW 19 x 82.5 (with collar) Carbide-tipped drill bits (one-piece) with hexagon shank end SW 19 x 82.5 Syetrical construction of the head with main and auxiliary cutters ensures centric guiding in the drill hole and reduces friction in driller hole, meaning longer life for the drill. Short spiral inlets and large boring dust grooves in the optimised double delivery helix ensure quick boring dust discharge. Maximum energy transfer due to dynamic core strengthening. The additional 2 auxiliary cutters protect the drill on contacting iron reinforcement and helps prevent damage to the bit head. For use in concrete, masonry, natural stone Working length Chisel with hexagon shank end, SW 19 x 82.5 (with collar) Chisel shape Cutting width Working length Packing unit Pointed chisels Pointed chisels Flat chisels Flat chisels Fettling chisels Toothed chisels Spades Spades Tapered spades Asphalt cutters Chasing gouges, offset Vibration tool Tool holder Stocker plate 45 x 45, 7 x 7 teeth Stocker plate 45 x 45, 5 x 5 teeth Stamper plate 150 x

18 COMBINATION HAMMERS, CHISEL HAMMERS ACCESSORIES FOR SPLINE SHANK Carbide-tipped haer drill bit with spline shank, 2 blades Syetrical construction of the head with main and auxiliary cutters ensures centric guiding in the drill hole and reduces friction, meaning longer life for the drill Short spiral inlets and large boring dust grooves in the optimised double delivery helix ensure quick boring dust discharge. Maximum energy transfer due to dynamic core strengthening. For use in concrete, masonry, natural stone Working length Packing unit Carbide-tipped haer drill bit with spline shank, 4 blades Syetrical construction of the head with main and auxiliary cutters ensures centric guiding in the drill hole and reduces friction, meaning longer life for the drill Short spiral inlets and large boring dust grooves in the optimised double delivery helix ensure quick boring dust discharge. Maximum energy transfer due to dynamic core strengthening. The additional 2 auxiliary cutters protect the drill on contacting iron reinforcement and helps prevent damage to the bit head. For use in concrete, masonry, natural stone Working length Packing unit ACCESSORIES WITH HEXAGON SHANK END Chisel with hexagon shank SW 19 (cyl. end 16.5 ) Chisel shape Cutting width Pointed chisels Pointed chisels Flat chisels Flat chisels Chasing gouges Scaling chisels Toothed chisels Joint chisels, carbide-tipped Dust extraction accessories for all machines with 43 collar diameter Extraction unit for work with drill bits of Ø 4-20 ; with drilling depth stop; to fasten the suction unit on the collar of the machines, one requires the handle Extraction unit for work with drill bits of Ø ; with drilling depth stop; to fasten the suction unit on the collar of the machines, one requires the handle Handle for extraction units for fitting the extraction units on the collar of the machines Suction hose connector with internal Ø 30 and connector with outer Ø Adapter 35/ Adapter HEDGE SPECIAL ROUTERS SANDING ANGLE SCREW- CORDLESS METABOXES TRIMMERS MACHINES SAWS AND PLANERS MACHINES GRINDERS DRIVERS DEVICES DRILLS IMPACT DRILLS HAMMERS 29