chisels & breakers HAMMER chisels & breaker steels SDS PLUS hammer chisels SDS MAX hammer chisels pneumatic breaker steels electric breaker steels

Size: px
Start display at page:

Download "chisels & breakers HAMMER chisels & breaker steels SDS PLUS hammer chisels SDS MAX hammer chisels pneumatic breaker steels electric breaker steels"

Transcription

1 107 chisels & breakers HAMMER chisels & breaker steels SDS PLUS haer chisels SDS MAX haer chisels pneumatic breaker steels electric breaker steels

2 MASONRY AND CONCRETE SDS plus chisels 108 MORTAR RAKING DP-SDS-MRC Allows mortar removal without damaging brick - up to window and door frames and behind external pipework. Debris is in chunks as opposed to dust. For all types of mortar and all depths of mortar. WITH CARBIDE TIPS CRANKED BODY FOR ACCESS COPPER BRAZED TIPS BRICK REMOVAL DP-SDS-BRC Allows removal of whole bricks without damaging them and the bricks around them. All types of mortar and all depths of mortar. FLAT NARROWED END WITH CARBIDE TIPS LONG BLADE FOR FULL BRICK DEPTH TILE REMOVAL DP-SDS-TRC Angled blade ensures impact energy is exerted underneath the tile and not into the floor / wall. For all types of tile, plaster and adhesives CRANKED BODY / ANGLED BLADE IMPACT ENERGY UNDER TILE REMOVE TILE / ADHESIVE / PLASTER / HAMMER ACTION sds plus chisels - user tips haer chisels for masonry materials PART NO / LIST MORTAR RAKING CHISEL DP-SDS-MRC BRICK REMOVING CHISEL DP-SDS-BRC TILE REMOVING CHISEL DP-SDS-TRC Always grease sds plus shanks before and during use. This will reduce heat build up and reduce wear on the machine & chisel itself Before using any sds plus machine - check that it has haer action only mode and ensure that this is engaged before using the chisel. Do not use on a machine that does not have this option Channelling chisels (DP-SDS-CC30/55/20) can be resharpened if they become blunt. Use a grinder or a good quality file Raking chisels are designed to have a shorter length in order to transmit as much power as possible For scutch comb holders - keep scutch comb teeth (or droves) in contact with the material at all times to stop the comb being levered out of the holder Mortar raking, tile removing and channelling chisels incorporate cranked shanks to ensure that the machine is angled away from the material being worked on. ORDER LINE;

3 MASONRY AND CONCRETE SDS plus chisels 109 CHANNELLING DP-SDS-CC30 / 55 / 20-EXT Quickly produce channels for cable runs etc. standard conduit (30), capping runs (55), behind skirting (20 extended) Can be used in conjunction with a wall chasing machine. For medium density block and soft brick. PRODUCES CHUNKS NOT DUST - HAMMER ACTION MACHINED HEAD 30MM, 55MM AND 20MM RAKING DP-SDS-RC30 / 55 For general masonry work in hard materials e.g channel chasing in engineering bricks. For all types of brick and masonry including engineering brick and also concrete. / LONG LIFE 30 & 55MM WITH NARROW END COPPER BRAZED CARBIDE TIP SCUTCH COMB DP-SDS-SC / SC-HOLDER ; Allows scutching operations using SDS plus machines instead of hand held. Interchangeable scutch ends mean no sharpening is necessary. Can also be used with droves in all types of masonry. For dressing, chasing etc. MULTI PURPOSE AND VERSATILE SEPARATE SCUTCH INSERTS haer chisels for masonry materials CHANNELLING CHISEL - 30MM PART NO / LIST DP-SDS-CC CHANNELLING CHISEL - 55MM DP-SDS-CC CHANNELLING CHISEL - 20MM DP-SDS-CC20-EXT RAKING CHISEL - 30MM RAKING CHISEL - 55MM SCUTCH COMB HOLDER - 30MM SCUTCH COMB DP-SDS-RC DP-SDS-RC DP-SDS-SC-HOLDER DP-SDS-SC 1.73

4 MASONRY AND CONCRETE SDS plus chisels 110 CHISEL DP-SDS-CHISEL & USAGE ; General purpose masonry work, 20 wide with 250 overall length. For all types of brick and masonry including engineering brick and also concrete. GENERAL PURPOSE FLAT CHISEL HEAD - 20MM wide CHISEL DP-SDS-SCHISEL & USAGE ; Scaling Chisel - General purpose masonry work, 40 wide with 250 overall length. For all types of brick and masonry including engineering brick and also concrete. 40MM WIDTH FLAT CHISEL HEAD - 40MM EXTRA WIDE CHISEL DP-SDS-EWC & USAGE ; Extra wide 80 blade for general purpose masonry work including chopping out electrical back boxes to size. 150 overall length. For medium density block, soft brick through to engineering brick. 80MM WIDTH WIDE FLAT CHISEL HEAD - 80MM haer chisels for masonry materials PART NO / LIST SDS PLUS CHISEL DP-SDS-CHISEL 7.24 SDS PLUS SCALING CHISEL DP-SDS-SCHISEL 9.40 SDS PLUS EXTRA WIDE CHISEL DP-SDS-EWC sds plus chisels - user tips Always grease sds plus shanks before and during use. This will reduce heat build up and reduce wear on the machine & chisel itself Before using any sds plus machine - check that it has haer action only mode and ensure that this is engaged before using the chisel. Do not use on a machine that does not have this option Channelling chisels (DP-SDS-CC30/55/20) can be resharpened if they become blunt. Use a grinder or a good quality file Raking chisels are designed to have a shorter length in order to transmit as much power as possible For scutch comb holders - keep scutch comb teeth (or droves) in contact with the material at all times to stop the comb being levered out of the holder Mortar raking, tile removing and channelling chisels incorporate cranked shanks to ensure that the machine is angled away from the material being worked on. ORDER LINE;

5 MASONRY AND CONCRETE SDS plus POINT 111 POINT DP-SDS-POINT General purpose masonry work, especially useful for chopping out drilled core holes. 250 overall length. For all types of brick and masonry including engineering brick and also concrete. 250MM LENGTH STRAIGHT CHISEL POINT gouging chisel DP-SDS-GC General purpose masonry work, u-shaped channel with 250 overall length. For all types of brick and masonry including engineering brick and also concrete. 250MM LENGTH U-SHAPED CHISEL END POINT & CHISEL SET DP-SDS-cp-set All set chisels are for general purpose masonry work. For all types of brick and masonry including engineering brick and also concrete. 4 PIECE POPULAR CHISEL SET ALL COMPONENTS ARE CHISEL, WIDE CHISEL, POINT & U SHAPE GOUGING CHISEL INCLUDED haer chisels for masonry materials PART NO / LIST SDS PLUS POINT DP-SDS-POINT 7.24 SDS PLUS GOUGING CHISEL DP-SDS-GC PIECE POINT AND CHISEL SET DP-SDS-CP-SET 39.50

6 MASONRY AND CONCRETE SDS MAX chisels 112 point DP-SMAX-POINT & USAGE ; General purpose masonry work, especially useful when chopping out drilled core holes. All types of brick and masonry including engineering brick and also concrete. 360MM AND 500MM LENGTH OPTIONS STRAIGHT - CHISEL POINT - ROTO STOP chisel DP-SMAX-CHISEL General purpose masonry work. All types of brick and masonry including engineering brick and also concrete. 360MM AND 500MM LENGTH OPTIONS STRAIGHT - FLAT 25MM WIDE CHISEL - ROTO STOP EXTRA WIDE CHISEL DP-SMAX-EWC For general purpose masonry work including chopping out electrical back boxes to size. (80 only). Medium density block / Soft brick through to engineering brick 50MM WIDE (300MM O/A) AND 80MM WIDE (300MM O/A) OPTIONS STRAIGHT - FLAT WIDE CHISEL haer chisels for masonry materials PART NO / LIST SDS MAX POINT - 360MM DP-SMAX-POINT SDS MAX POINT - 500MM DP-SMAX-POINT SDS MAX CHISEL - 360MM DP-SMAX-CHISEL SDS MAX CHISEL - 500MM DP-SMAX-CHISEL SDS MAX WIDE CHISEL - 50MM DP-SMAX-EWC SDS MAX WIDE CHISEL - 80MM DP-SMAX-EWC sds MAX chisels - user tips Always grease sds max shanks before and during use. This will reduce heat build up and reduce wear on the machine & chisel itself Before using any sds max machine - check that it has haer action only mode and ensure that this is engaged before using the chisel. Do not use on a machine that does not have this option SDS Max points, chisels and extra wide chisels can be re-sharpened. ORDER LINE;

7 MASONRY AND CONCRETE SDS MAX chisels 113 BRICK REMOVAL DP-SMAX-BRC & USAGE ; Allows removal of whole bricks without damaging them and the bricks around them. For all types of mortar and all depths of mortar. COPPER BRAZED CARBIDE INSERTS LONG BLADE FOR FULL BRICK DEPTH FLAT - NARROWED END CLAY spade DP-SMAX-CSPADE Purpose designed blade for cutting / digging of bolder clay. Favoured by tunnelling contractors and companies specialising in under-pinning in clay conditions. Also excellent for general garden and landscaping. FLAT - WIDE SHOVEL HEAD FLOOR CLEANING TOOL DP-SMAX-FC-TOOL One piece floor cleaning tool with replaceable blade for removing floor based materials and coverings. REPLACEABLE BLADE haer chisels for masonry materials PART NO / LIST SDS MAX BRICK REMOVING CHISEL DP-SMAX-BRC SDS MAX CLAY SPADE DP-SMAX-CSPADE SDS MAX FLOOR CLEANING TOOL DP-SMAX-FC-TOOL

8 MASONRY AND CONCRETE SDS MAX STEM & ADAPTOR 114 stem DP-SMAX-STEM Stem - To be used in conjunction with bush haer heads and separate floor cleaning head & blade. STRAIGHT WITH K-TAPER END MAX TO PLUS DP-SMAX-SDS-AD Allows SDS Plus drill bits, chisels and accessories to be used in SDS Max machines - giving it flexibility of user options. HAMMER AND ROTARY ACTION USE SDS PLUS DRILL PRODUCTS IN SDS MAX MACHINES SCUTCH HOLDER DP-SMAX-SC-HOLDER Allows scutching operations using SDS MAX machines instead of hand held. Interchangeable end mean no sharpening is necessary. Can also be used with droves. For all types of masonry - dressing, chasing etc. MULTI-PURPOSE TOOL - EXTREMELY VERSATILE SEPARATE SCUTCH INSERTS haer chisels for masonry materials PART NO / LIST SDS MAX STEM DP-SMAX-STEM SDS MAX PLUS TO MAX ADAPTOR DP-SMAX-SDS-AD SDS MAX SCUTCH COMB HOLDER DP-SMAX-SCHOLDER SDS SCUTCH COMBS DP-SDS-SC 1.73 ORDER LINE;

9 MASONRY AND CONCRETE BREAKER STEELS - KEY 115 CODE CODE 1 MOIL POINT 2 NARROW CHISEL Drop forged from high grade steel, this Haer Iron with heat treated work areas is used for demolition work and starting holes in the centre of a concrete slab. The most coon of the demolition steels used for general breaking where there is not a requirement to control the line of fracture. 3 WIDE CHISEL / BOLSTER CHISEL 4 Narrow chisel used in a similar way to the moil point but the line of fracture is controlled along the line of the chisel end. Used on applications where it is important to have a clean edge retained on the work-piece to be broken. 115 WIDE TARMAC CUTTER Wide chisel or bolster chisel used in a similar way to the moil point but the line of fracture is controlled along the line of the chisel end. Used on applications where it is important to have a clean edge retained on the work-piece to be broken. 5 CLAYSPADE 6 Tarmac Cutter used for cutting of coated stone. The wedge shape of the side profile is preferred by many operators as it facilitates easy removal of the blade after each cut. WIDE ASPHALT CUTTER Clayspade is a purpose designed blade for cutting / digging of boulder clay. The geometry facilitates the cutting action to return to an open face. If the edge is damaged during use it will destroy the natural scooping action. This tool is favoured by tunnelling contractors and companies specialising in underpinning in clay conditions. Also excellent for general garden and landscaping. 7 TAMPING PAD dia 8 Asphalt Cutter similar in application to the Tarmac Cutter but has the benefit of a thinner parallel side profile and radius on the blade allowing faster penetration in the cutting action. Suitable for lighter weight and less powerful breakers. STEM - Use with 180 dia tamping pad Floor compaction tool. 9 POINT 10 These tools need to be used together the stem can have a number of shank configurations to suit both Pneumatic and Electric powered breakers. The pad is selected to suit the type of compaction operation required whether this be for back filling following emergency repairs to services or compaction of mould in industrial applications. SCUTCH COMB HOLDER The most coon of the demolition steels used for general breaking where there is not a requirement to control the line of fracture. 11 FLOOR CLEANING TOOL 12 Allows scutching operations using power tools instead of hand held. Interchangeable scutch ends mean no sharpening is necessary. Can also be used with droves. STEM - Use with floor cleaning tools and pads Floor Cleaning Tool used in conjunction with a shank to suit the type of breaker to be used. It has a flexible replacement blade held in place by retaining bolts and can be used for the removal of lino tiles or debris spilt on to concrete floors prior to finishing. Stem for floor cleaning tool is available with different shank types and facilitates the use of the smaller electric tamping pads and especially the floor cleaning tool. HOW TO SELECT YOUR DURO BREAKER STEEL 1 2 CHOOSE THE KIND OF APPLICATION YOU NEED TO UNDERTAKE AND THEREFORE THE BREAKER STEEL TYPE YOU NEED TO ACHIEVE THIS FROM THE LIST ABOVE. THEN SELECT THE MACHINE TYPE YOU WILL BE USING FROM THE SELECTION OF PNEUMATIC AND ELECTRIC ACROSS PAGES FOR EXAMPLE: 75MM WIDE CHISEL REQUIRED TO BE USED WITH A 32X160 HEX SHANK BREAKER

10 PNEUMATIC AND HYDRAULIC - hex shank breaker steels X 160MM (1-¼" x 6-¼") HEX SHANK Moil point under collar 32.0x160HX-MP Moil point under collar 32.0x160HX-MP Narrow chisel under collar 32.0x160HX-NC Narrow chisel under collar 32.0x160HX-NC wide chisel 32.0x160HX-75WC wide tarmac cutter 32.0x160HX-115WTC Clayspade x 205 Blade 32.0x160HX-135x205S Stem for use with 160 Pad 32.0x160HX-STEM X 160MM (1-1/8" x 6-¼") HEX SHANK Moil point under collar 28.0x160HX-MP Moil point under collar 28.0x160HX-MP Narrow chisel under collar 28.0x160HX-NC Narrow chisel under collar 28.0x160HX-NC wide chisel 28.0x160HX-75WC wide tarmac cutter 28.0x160HX-115WTC X 108MM (1" x 4-¼") HEX SHANK Moil point under collar 25.0x108HX-MP Moil point under collar 25.0x108HX-MP Narrow chisel under collar 25.0x108HX-NC Narrow chisel under collar 25.0x108HX-NC Tarmac cutter wide 25.0x108HX-115WTC X 82MM (7/8" x 3-¼") HEX SHANK Moil point under collar 22.0x82HX-MP Moil point under collar 22.0x82HX-MP Narrow chisel under collar 22.0x82HX-NC Narrow chisel under collar 22.0x82HX-NC wide asphalt cutter under collar 22.0x82HX-125WTC Clayspade X 160 Blade 22.0x82HX-CS MOIL POINT NARROW CHISEL WIDE / BOLSTER CHISEL WIDE TARMAC CUTTER TAMPING PAD tamping pad STEM ORDER LINE;

11 PNEUMATIC AND HYDRAULIC - hex & ROUND shank BREAKER STEELS X 50MM (¾" x 2") HEX SHANK Moil point under collar 19.0x50HX-MP Narrow chisel under collar 19.0x50HX-NC wide chisel under collar 19.0x50HX-60WC X 75MM ROUND SHANK Moil point under collar 25.0X75RS-MP Narrow chisel under collar 25.0X75RS-NC CP9S SHANK BALL RETAINER CHUCK Point o/a length CP9S-P Narrow chisel o/a length CP9S-NC wide chisel o/a length CP9S-WC an extensive range of breakers available from our sister company yokota uk Unrivalled quality and market leading tool life Comprehensive service and support. Three exclusive brands lightweight haers heavy duty haers paving breakers rock drills POINT WIDE ASPHALT CUTTER SCUTCH Comb holder CLAYSPADE FLOOR CLEANING TOOLS floor cleaner STEM

12 KANGO & HILTI ELECTRIC breaker steels 118 KANGO 900/950 Moil point o/a length K900/950-MP Moil point o/a length K900/950-MP Narrow chisel o/a length K900/950-NC Narrow chisel o/a length K900/950-NC wide chisel o/a length K900/950-50WC wide chisel o/a length K900/950-75WC Stem for floor cleaning tool o/a K900/950-STEM Clayspade x 165 Blade K900/950-CSPADE Scutch comb holder K900/950-SCHOLDER HILTI 905 & 1000 Moil point o/a length H905/1000-MP Narrow chisel o/a length H905/1000-NC wide chisel o/a length H905/ WC Clayspade x 165 Blade H905/1000-CSPADE Stem for floor cleaning tool 275 o/a length H905/1000-STEM HILTI Moil point o/a length H3000-MP Narrow chisel o/a length H3000-NC wide tarmac cutter H WTC MOIL POINT NARROW CHISEL WIDE / BOLSTER CHISEL WIDE TARMAC CUTTER TAMPING PAD tamping pad STEM ORDER LINE;

13 BOSCH ELECTRIC BREAKER STEELS BOSCH Moil point o/a length B11205-MP Narrow chisel o/a length B11205-NC BOSCH USH 27 Moil point o/a length B11304-MP Narrow chisel o/a length B11304-NC Tarmac cutter 115 wide B WTC an extensive range of breakers available from our sister company yokota uk Unrivalled quality and market leading tool life Comprehensive service and support. Three exclusive brands lightweight haers heavy duty haers paving breakers rock drills POINT WIDE ASPHALT CUTTER SCUTCH Comb holder CLAYSPADE FLOOR CLEANING TOOLS floor cleaner STEM

14 KANGO & HILTI ELECTRIC breaker steels 120 ACCESSORIES PADS / BUSH HAMMER HEADs / TOOLS 160 dia square tamping pad for use with 32x160 stems 160MM DIAMETER PAD Floor cleaning head and blade for use with H905 / SMAX / K900 Stems FLOOR CLEANING TOOL Spare 2 blade for floor cleaning tool CLEAN TOOL BLADE Bush haer head for use with 50 Bush Haer Head H905 / SMAX / K900 Stems N.B Not to be used with a HILTI TE500 or equivalent power machine - these machines are too powerful for this product an extensive range of floor scrapers available from our sister company yokota uk Unrivalled quality and market leading tool life Comprehensive service and support. ORDER LINE;

HAMMER chisels & breaker steels

HAMMER chisels & breaker steels 83 HAMMER chisels & breaker steels HAMMER chisels & breaker steels SDS PLUS haer chisels SDS MAX haer chisels pneumatic breaker steels electric breaker steels SDS plus chisels 84 MORTAR RAKING DP-SDS-MRC

More information

Masonry & Specialty Drilling

Masonry & Specialty Drilling www.irwin.com Masonry & Specialty Drilling SDS-Plus SPEEDHAMMER POWER FEATURES Powers Through rebar With 125 years of experience in drill bit manufacturing, product innovation, design, and development,

More information

Masonry & Specialty Drilling

Masonry & Specialty Drilling Masonry & Specialty Drilling www.irwin.com SDS-Plus POWERS THROUGH REBAR With 125 years of experience in drill bit manufacturing, product innovation, design, and development, and a full range of products

More information

Masonry Drill Bits

Masonry Drill Bits www.irwin.com Masonry Drill Bits Powers Through Rebar With 125 years of experience in drill bit manufacturing, product innovation, design, and development, and a full range of products available, IRWIN

More information

Joe Jeter Sales Brunner & Lay Catalog 7850 Carr St, Dallas, TX fax

Joe Jeter Sales Brunner & Lay Catalog 7850 Carr St, Dallas, TX fax Joe Jeter Sales Joe Jeter Sales Brunner & Lay Catalog 7850 Carr St, Dallas, TX 75227-4019 214-388-4707 fax local 214-388-6707 800-455-3837 www.joejetersales.com The products featured in this catalog represent

More information

118 Chiseling Overview Bosch Accessories 11/ % Bosch: the new flat chisel SDS-max RTec Sharp and the new pointed chisel SDS-max RTec Speed

118 Chiseling Overview Bosch Accessories 11/ % Bosch: the new flat chisel SDS-max RTec Sharp and the new pointed chisel SDS-max RTec Speed Chiseling 118 Chiseling Overview Bosch Accessories 11/12 100% Bosch: the new flat chisel SDS-max RTec Sharp and the new pointed chisel SDS-max RTec Speed Bosch Accessories 11/12 Chiseling Overview 119

More information

Masonry Tools Index. Impact Hammer Drills. Percussion Bits. Spline Bits, Impact Hammer. Percussion Core Drills. Masonry Drill & Sets

Masonry Tools Index. Impact Hammer Drills. Percussion Bits. Spline Bits, Impact Hammer. Percussion Core Drills. Masonry Drill & Sets Index Impact Hammer Drills Type 606 Slot Drive System...... 112 Type 609 Extra Heavy-Duty...... 114 Masonry Drill & Sets Type 214 All-Purpose, HD........ 110 Type 215 Fast Spiral, HD........ 108 Type 216

More information

Concrete drills 2.0. SDS-plus hammer drills Applications: for drilling in granite, concrete, clinker, stone, masonry, tiles and marble.

Concrete drills 2.0. SDS-plus hammer drills Applications: for drilling in granite, concrete, clinker, stone, masonry, tiles and marble. » CONCRETE DRILLS Concrete drills SDS-plus haer drills Applications: for drilling in granite, concrete, clinker, stone, masonry, tiles and marble. SDS-plus haer drills with 4 cutters Applications: for

More information

Drilling and Demolition

Drilling and Demolition Drilling and Demolition Hilti. Outperform. Outlast. 18 Intoduction Application and tool selector Page 20-21 Cordless rotary hammers Cordless rotary hammer TE 2-A22 Page 22 Cordless rotary hammer TE 6-A36-AVR

More information

ECONO QUALITY A value quality, entry level grade blade for the extremely cost conscious user Provides good cutting performance at low initial cost Ideal for first time and occasional users PREMIUM QUALITY

More information

Chiselling. Pack quantity (Pieces per pack)

Chiselling. Pack quantity (Pieces per pack) 29 Chiselling 30 Chiselling Special features Hawera SDS-max chisels: Quantum leap RTecSPEED SDS-max: with power spin action The exceptional chisel: The innovative power spin action of the fast, star-shaped

More information

DRILLING AND DEMOLITION

DRILLING AND DEMOLITION DRILLING AND DEMOLITION 20 Rotary Hammers Drill UD 30 Page 26 Rotary hammer TE 1 Page 26 Rotary hammer TE 2 Page 27 Rotary hammer TE 2-S Page 27 Rotary hammer TE 2-M Page 28 Rotary hammer TE 7 Page 28

More information

Drilling and Demolition. Leading-edge Technology. Outstanding Service.

Drilling and Demolition. Leading-edge Technology. Outstanding Service. Leading-edge Technology. Outstanding Service. Intoduction Application and tool selector Page 20-21 Cordless rotary hammers Cordless rotary hammer TE 2-A22 Page 22 Cordless rotary hammer TE 6-A36-AVR Page

More information

Sandvik breakers in Action

Sandvik breakers in Action Sandvik breakers in Action Sandvik Mining and Construction, the world-leading manufacturer of hydraulic breakers, has been setting the standards for breaking for over three decades. Sandvik, through its

More information

MACHINERY & WORKSHOP EQUIPMENT

MACHINERY & WORKSHOP EQUIPMENT MACHINERY & WORKSHOP EQUIPMENT drills - core DRILLS - Magnetic Base High Speed Steel Annular Cutters Made from the highest grade M2 steel Manufactured to exceed AISI / ASTM standards Fully ground with

More information

Universal rotary hammer drill, 4 kg, SDS-plus. CHE 4-32 SDS-plus

Universal rotary hammer drill, 4 kg, SDS-plus. CHE 4-32 SDS-plus Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Universal rotary hammer drill, 4 kg, SDS-plus CHE 4-32 SDS-plus Order number 428.337 Universal rotary hammer drill, 4 kg, SDS-plus + 900

More information

ABG Sydney: Unit 1, Gibbes St, Chatswood East NSW 2067 Ph: Fax:

ABG Sydney: Unit 1, Gibbes St, Chatswood East NSW 2067 Ph: Fax: PVAC2 Heavy Asphalt Cutter - 28 Hex PVCB2 Wide Chisel 3 Inch (75mm) - 28 Hex PVCS2 Clay Spade 9x5b - 28 Hex PVDC2 Digger Chisel 9x3-28 Hex PVEB2 Easy Bust - 28 Hex PVMP2 Moil Point 18 Inch (Under Collar)

More information

WET diamond core drills

WET diamond core drills 73 WET diamond core drills DRY DIAMOND CORE wet core drills DRILLS INTRO WET diamond cores / drills / rigs wet core drill accessories core drill core drill rig core drill rig accessories BRICK / BLOCK

More information

POWER TOOL ACCESSORY GUIDE

POWER TOOL ACCESSORY GUIDE POWER TOOL ACCESSORY GUIDE TABLE OF CONTENTS METAL SAWZALL BLADES 3 WOOD SAWZALL BLADES & HACKZALL BLADES & BLADE KITS 4 SPECIALTY SAWZALL BLADES 5 HOLE SAWS & HOLE SAW KITS 6 SPECIALTY HOLE SAWS 7 THIN

More information

THE HARDEST GANG IN TOWN.

THE HARDEST GANG IN TOWN. HAMMERS THE HARDEST GANG IN TOWN. When we do something, then we do it right. That is why our haers are how tools for craftspeople should be: robust, powerful and durable. Our complete range of haers is

More information

Universal rotary hammer drill, 2,5 kg, SDS-plus. CHE 2-28 SDS-plus

Universal rotary hammer drill, 2,5 kg, SDS-plus. CHE 2-28 SDS-plus Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Universal rotary hammer drill, 2,5 kg, SDS-plus CHE 2-28 SDS-plus Order number 43.666 No load speed 0-300 rpm Blows per minute 0-4000

More information

Product Overview. Electric Pneumatic Hydraulic. Concrete and Masonry Dust Collection Systems Hot Work Zone Tools

Product Overview. Electric Pneumatic Hydraulic.   Concrete and Masonry Dust Collection Systems Hot Work Zone Tools Electric Pneumatic Hydraulic Product Overview Metalworking Surface Finishing Surface Preparation Concrete and Masonry Dust Collection Systems Hot Work Zone Tools www.csunitec.com Metalworking In the shop

More information

Blower Cutter Jig Saw Circular Saw Circular Saw Drill High Speed Drill High Speed Drill Mixer Hammer Drill Hammer Drill Demolition Hammer

Blower Cutter Jig Saw Circular Saw Circular Saw Drill High Speed Drill High Speed Drill Mixer Hammer Drill Hammer Drill Demolition Hammer Index M00 M00 M0801K M0901 M0920 M0921 M1902 M2300 M2401Z M3600 M3601 M3700 Cutter Drill Power Planer Compound Miter Saw Portable Cut-off Router Router (Plunge type) Trimmer 08 08 M4000 M4101 M4301 M5801

More information

Pick & 4-Bolt Chipping Hammers

Pick & 4-Bolt Chipping Hammers Pick & 4Bolt Chipping Hammers 1190SUL1 Retainer 11942 Retainer Spring Michigan Pneumatic Model MPcH2R Model MPcH2H HeavyDuty Chipping Hammer Four bolt design eliminates handle breakage. Includes chisel

More information

Concrete drills 324 PRECISION TOOLS

Concrete drills 324 PRECISION TOOLS BETONBOHRER CONCRETE FORETS BETONBOREN PUNTE BROCAS VRTÁKY WIERTŁA СВЁРЛА BURGHIE UDARNI SVRDLA BETONFÚRÓK BETONO PER MATKAP SVEDRI À ZA ПО PARA GRĄŽTAI DO PENTRU BÉTON DRILLS MURO БЕТОНУ BETONU HORMIGÓN

More information

Power Tool Accessories

Power Tool Accessories Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Masonry Diamond Cutting Diamond Cutting Blades Milwaukee Diamond Cutting Blades are designed to the highest standards only using quality diamonds.

More information

Contents. Air & Electric Hammer Accessories. Page. Terms and Conditions. Terms & Conditions. Contents 3-4. Paving Breaker Tools.

Contents. Air & Electric Hammer Accessories. Page. Terms and Conditions. Terms & Conditions. Contents 3-4. Paving Breaker Tools. Contents Terms and Conditions Approved safety gear such as hard hats, safety glasses, safety shoes and hearing protection should be worn at all times. Tools should only be used for the work for which they

More information

D25122(K) D25123(K) D25124(K) D25213(K)

D25122(K) D25123(K) D25124(K) D25213(K) D25122(K) D25123(K) D25124(K) D25213(K) English 6 Copyright DEWALT 2 3 1 5 4 9 7 6 11 10 D25213 5 4 3 9 7 6 11 10 1 2 D25123 8 4 A D25122 D25124 3 5 4 6 B1 5 4 7 12 B2 C 10 9 11 D 4 E 3 3 F1 F2 6 8 13

More information

GRINDERS 86 SAWS 86-90

GRINDERS 86 SAWS 86-90 sawing, cutting & grinding GRINDERS 86 SAWS 86-90 MINI GRINDER Cuts and grinds masonry, concrete and metal. Cuts to a depth of 25mm Can be fitted with surface grinding wheel for facing and grinding Powerful

More information

COMBO KITS FLASHLIGHTS & CHARGERS M12 2-Tool Combo Kit. M12 2-Tool Combo Kit. M12 4-Tool Combo Kit

COMBO KITS FLASHLIGHTS & CHARGERS M12 2-Tool Combo Kit. M12 2-Tool Combo Kit. M12 4-Tool Combo Kit COMBO KITS 2490-22 M12 2-Tool Combo Kit 12 V Screwdriver (2401-20) Hackzall Recip Saw (2420-20) 30 minutes 2491-22 M12 2-Tool Combo Kit 12 V 1/4 Hex Impact Driver (2450-20) Hackzall Recip Saw (2420-20)

More information

Holemaking Products & Accessories

Holemaking Products & Accessories Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy

More information

WondEr Bars Ripping Bars. Cold Chisels Punches 85

WondEr Bars Ripping Bars. Cold Chisels Punches 85 DEMOLITION Stanley has elevated demolition tools from crude implements to precision-engineered tools that are every bit as essential and indispensable as a hammer or screwdriver. And while some tool companies

More information

VIEWING OPTIONS: In Adobe PDF Viewer, from the main toolbar choose View, then Page Display, turn on Two-Up and Show Cover Page During Two-Up

VIEWING OPTIONS: In Adobe PDF Viewer, from the main toolbar choose View, then Page Display, turn on Two-Up and Show Cover Page During Two-Up VIEWING OPTIONS: To make our catalog easier to read we recommend using a two page display, as some sections have one page for the exploded view and one for the parts listing. Changing these settings will

More information

Drilling and demolition systems. Innovative systems for drilling and chiselling.

Drilling and demolition systems. Innovative systems for drilling and chiselling. . Innovative systems for drilling and chiselling. 48 Power drills Page SR 16 drill / screwdriver 52 Rotary hammer drills Page TE 2-S rotary hammer drill 52 TE 2-A cordless rotary hammer drill 53 TE 6-S

More information

Ever since we filed our first patent for a portable electric drill in 1916, we ve been one of the world s great innovators in power tools for home

Ever since we filed our first patent for a portable electric drill in 1916, we ve been one of the world s great innovators in power tools for home INTRODUCTION Buying a DIY power tool can be a daunting task. However, although DIY stands for Do It Yourself you don t have to feel alone when choosing Black & Decker. This power tool buyers guide has

More information

AUGER TOOLS. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD

AUGER TOOLS. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD AUGER TOOLS MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com AUGER TOOLS TABLE OF CONTENTS AUGER OVERVIEW... 3 HOLLOW STEM AUGERS... 4-12 2 1/4" Hollow Stem Augers...

More information

has many talents. The Uneo Drilling

has many talents. The Uneo Drilling Drilling Screwdriving Hammering The Uneo has many talents. Make it your home with the Uneo and Uneo Maxx from Bosch. The compact cordless rotary hammers with pneumatic hammer mechanism can hammer, drill

More information

Power Tool Accessories

Power Tool Accessories Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Steel Hawg Cutters Threaded Steel Hawg Cutters Faster cutting: Alternating tooth form geometry makes fast work of cutting steel Long life: Abrasion-resistant

More information

S E R I E S C ATA L O G U E

S E R I E S C ATA L O G U E SERIES CATALOGUE Safety Precautions WARNINGS Wear working clothes suitable for the operation. In particular, eye protection equipment must be worn to prevent shavings from getting into your eyes. Prepare

More information

HydrauliC breakers sb range. A solid body, an innovative tool guiding system and a remarkable hydraulic design

HydrauliC breakers sb range. A solid body, an innovative tool guiding system and a remarkable hydraulic design HydrauliC breakers sb range A solid body, an innovative tool guiding system and a remarkable hydraulic design Solid productivity you can rely on! We introduced the innovative hydraulic breaker 50 years

More information

British Columbia Carpenter Apprenticeship Program

British Columbia Carpenter Apprenticeship Program British Columbia Carpenter Apprenticeship Program Level 2 Line C Competency C-2 Use Portable Power Tools 7960003550 Ordering Crown Publications, Queen s Printer PO Box 9452 Stn Prov Govt 563 Superior St.

More information

A solid body, an innovative tool guiding system and a remarkable hydraulic design

A solid body, an innovative tool guiding system and a remarkable hydraulic design HYDRAULIC BREAKERS SB Range A solid body, an innovative tool guiding system and a remarkable hydraulic design Solid productivity you can rely on! We introduced the innovative hydraulic breaker 50 years

More information

ABG Sydney: Unit 1, Gibbes St, Chatswood East NSW 2067 Ph: Fax:

ABG Sydney: Unit 1, Gibbes St, Chatswood East NSW 2067 Ph: Fax: Kango 850, 900, 900K, 950, 950K, 1400, 928, 978, 750 Hitachi DH50SA, DH50SA1, H55SA, H55SC Makita HM1200K, HR3850K, HR5000K KKK9MP15 KKK9MP18 KKK9MP24 KKK9NC15 KKK9NC18 KKK9NC24 KKK9CB2 KKK9CB3 KKK9CS

More information

ANCHORS SLEEVE ANCHORS BOLT DIAMETER

ANCHORS SLEEVE ANCHORS BOLT DIAMETER SLEEVE ANCHORS No hole spotting. No mis-alignments. Simply drill through the fixture into concrete, insert and tighten. Preassembled for fast, easy installation. No special tools necessary; meets federal

More information

UNIT 2.1: Routine check before machines operation. Unit Objectives Tools and Equipment for Routine Check. Spanner Set

UNIT 2.1: Routine check before machines operation. Unit Objectives Tools and Equipment for Routine Check. Spanner Set UNIT 2.1: Routine check before machines operation Unit Objectives At the end of this unit, you will be able to: 1. Learn about the tools and equipment used for routine check-up of the jack hammer. 2. Types

More information

Drill Bits & Hole Saws

Drill Bits & Hole Saws F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill

More information

SIOUX TOOLS INDUSTRIAL CATALOG PERCUSSIVE PERCUSSIVE. Index Scalers Hammers Percussive Accessories

SIOUX TOOLS INDUSTRIAL CATALOG PERCUSSIVE PERCUSSIVE. Index Scalers Hammers Percussive Accessories SIOUX TOOLS INDUSTRIAL CATALOG PERCUSSIVE PERCUSSIVE Index Scalers...65 66 Hammers.... 66 Percussive Accessories.... 67 69 63 PERCUSSIVE SIOUX TOOLS INDUSTRIAL CATALOG PERCUSSIVE Hammering Home A Point

More information

Working Tools. for hydraulic breakers

Working Tools. for hydraulic breakers Working Tools for hydraulic breakers 2 Content list Tools for every job...4 Own production...6 Handling of working tools...7 Atlas Copco...8 SB Series...8 MB Series....10 HB Series....12 SBC Series....14

More information

MASONRY DRILL and CHISEL

MASONRY DRILL and CHISEL MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content

More information

Customer Satisfaction. Customer. Effectiveness & Efficiency. Brighter future. India

Customer Satisfaction. Customer. Effectiveness & Efficiency. Brighter future. India Customer Satisfaction Customer Brighter future Effectiveness & Efficiency TM India O O Pistol Design SDS Plus Rotary Hammers Rotary Drills PFH 24 E PFH 26 PH 26 PH 27 PH 28 max 24 mm 2 mode Rotary Hammer

More information

MAGNETIC DRILL PRESSES AC35 MAGNETIC DRILL PRESS

MAGNETIC DRILL PRESSES AC35 MAGNETIC DRILL PRESS MAGNETIC DRILL PRESSES AC35 MAGNETIC DRILL PRESS Triple Edge Cutting Features: The CT series features two sets of three cutting tips each with different geometries, balancing and cutting forces. This enables

More information

MASONRY TOOLS 370-AF SURE. SURE GRIP-FIBERGLASS HANDLE Sure ridged handle grip provides for comfortable feel and shock resistance

MASONRY TOOLS 370-AF SURE. SURE GRIP-FIBERGLASS HANDLE Sure ridged handle grip provides for comfortable feel and shock resistance MASONRY TOOLS WASHINGTON PATTERN BRICK HAMMERS Our brick hammers are made of high-grade forged hammer steel Specially heat treated to maintain a keen cutting edge Perfectly balanced and superior in every

More information

Clamping devices 521

Clamping devices 521 Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps

More information

Underwater Tool Section

Underwater Tool Section Underwater Tool Section Tools for Underwater Construction, Salvage and Demolition Stanley Hydraulic Tools is a leading worldwide provider of underwater hydraulic tools to professional divers, marine maintenance,

More information

Tools for Plumbing. Introduction

Tools for Plumbing. Introduction 2 Tools for Plumbing Introduction So far, we have studied the importance of plumbing system, its stages and the role and responsibilities of a plumber. We will now look at the various tools that help a

More information

MITCO 12.7mm REDUCED SHANKS 1 MITCO MORSE TAPER SHANKS (NO 1 & 2) MITCO SINGLE ENDED STUBS 2 MITCO DOUBLE ENDED STUBS 2 MASONRY SDS DRILLS 4

MITCO 12.7mm REDUCED SHANKS 1 MITCO MORSE TAPER SHANKS (NO 1 & 2) MITCO SINGLE ENDED STUBS 2 MITCO DOUBLE ENDED STUBS 2 MASONRY SDS DRILLS 4 INDEX MITCO Page No MITCO JOBBER DRILLS BULK 1 CARDED 1 MITCO 12.7mm REDUCED SHANKS 1 MITCO MORSE TAPER SHANKS (NO 1 & 2) 2 MITCO SINGLE ENDED STUBS 2 MITCO DOUBLE ENDED STUBS 2 MASONRY DIY BULK 3 CARDED

More information

DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES

DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES PRICE HEAVY-DUTY BLADES PER PER E-BLADES NUMBER Great Low Prices E-100 10 22025 $14.65 Heavy Duty HSS for steel and aluminum.

More information

Holemaking Products & Accessories

Holemaking Products & Accessories Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get

More information

HOW TO CREATE AN OPENING IN BRICKWORK.

HOW TO CREATE AN OPENING IN BRICKWORK. HOW TO CREATE AN OPENING IN BRICKWORK. Most load bearing walls are made from brick or block. But do not assume if a wall is made from a wood frame and plasterboard that it is non load bearing as modern

More information

tool Accessory Catalogue 2011

tool Accessory Catalogue 2011 tool Accessory Catalogue 2011 NEW Hand Tools Also Inside Saint John Moncton Dartmouth Halifax Sydney 331 Chelsey Dr. 320 Edlinburgh Dr. Akerley Blvd. 3630 Strawberry Hill 397 George St. Toll Free: 1-888-846-7637

More information

16 Piece Twister Drilling Set.

16 Piece Twister Drilling Set. 16 Piece Twister Drilling Set. TECHNICAL REFERENCE GUIDE Drill. With Impact. Not all ¼ shank accessories can withstand the higher torque produced by an impact driver. Our 16 Piece Twister Drilling Set

More information

CONSUMABLES FOR HYDRAULIC BREAKERS. Working Tools and Chisel Paste. Construction Technique Service

CONSUMABLES FOR HYDRAULIC BREAKERS. Working Tools and Chisel Paste. Construction Technique Service CONSUMABLES FOR HYDRAULIC BREAKERS Working Tools and Chisel Paste Construction Technique Service CONTENTS It s more than just another piece of steel! 4 ProLine 6 ClassicLine 7 Working tool type 8 How to

More information

DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES

DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES Great Low Prices HEAVY-DUTY E-BLADES BLADES PER NUMBER E-0 22025 PRICE PER $14.20 Heavy Duty HSS for steel and aluminum.

More information

Drilling and Demolition. Hilti. Outperform. Outlast.

Drilling and Demolition. Hilti. Outperform. Outlast. Drilling and Demolition Hilti. Outperform. Outlast. 88 Drilling and Demolition Rotary Hammers Universal drill for metalworking UD 30 98, 103 Rotary hammer TE 1 99, 103 Rotary hammer TE 2-M 100, 103 Rotary

More information

FUBAR TOOLS 78 WONDER BARS DEMOLITION & RIPPING BARS PRECISION PRY BARS COLD CHISELS PUNCHES 85

FUBAR TOOLS 78 WONDER BARS DEMOLITION & RIPPING BARS PRECISION PRY BARS COLD CHISELS PUNCHES 85 DEMOLITION Stanley has elevated demolition tools from crude implements to precision-engineered tools that are every bit as essential and indispensable as a hammer or screwdriver. And while some tool companies

More information

PERCUSSION DRILL BITS

PERCUSSION DRILL BITS Universal drill bit GOLCRAFT 44 SS-plus MS5 universal drill bit GOLCRAFT 46 Tile/brick drill bit KERAMIK 47 Tile drill bit / KERAMIK diamond - dry drill 49 Glass drill bit 51 Glass drill bit KEILBIT 52

More information

Innovative Cutting Tool Solutions. Product Line Card

Innovative Cutting Tool Solutions. Product Line Card Innovative Cutting Tool Solutions Product Line Card www.championcuttingtool.com Product Lines Cutting Tool Solutions Jobber XL5 Heavy Duty Sizes - 1/16 to 1/2, Letters & Numbers Stainless steel & tough

More information

IADC Dull Grading for PDC Drill Bits

IADC Dull Grading for PDC Drill Bits IADC Dull Grading for PDC Drill Bits SPE/IADC 23939 First Revision to the IADC Fixed Cutter Dull Grading System ~ 1992 Version 2.4 How is Dull Grading Useful? Quick and simple way to describe the dull

More information

BREAKING, DRILLING & FIXING

BREAKING, DRILLING & FIXING 13 Hire Depots - Serving South, West & North of England 74 BREAKING, DRILLING & FIXING 12.0 100 24v CORDLESS HEAVY DUTY HAMMER DRILL 11.0 Cordless hammer with the versatility of a mains powered machine

More information

Sigma Fasteners, Inc. Section 7

Sigma Fasteners, Inc. Section 7 DESCRIPTION PAGE s Wedge s 7-1 Drop-In s 7-2 Single Expansion s 7-2 Machine Screw s 7-2 Lag Shields 7-3 Lead Wood Screw s 7-3 Hammer Drive s 7-4 Hollow Wall Fasteners 7-5 Toggle Bolts 7-6 Toggle Wings

More information

Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP

Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292

More information

Ernest Bennett Saws Price List

Ernest Bennett Saws Price List Ernest Bennett Saws Price List 2015 Contents Circular Saws Rip saws 3 Anti-kick rip saws 3 Spring set plate saws 4 General cross cut saws 4 Negative hook cross cut saws 5 Construction saws 5 Universal

More information

Decide what reach is required. This must be at least equal to or larger than the depth of the part which needs removal. Safe Working Load (tonnes)

Decide what reach is required. This must be at least equal to or larger than the depth of the part which needs removal. Safe Working Load (tonnes) Sykes-Pickavant pullers are manufactured to a very high specification and subjected to rigorous testing - far exceeding their stated capacities. The legs and beams are drop forged from high quality steel

More information

Power Tool Accessories

Power Tool Accessories Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Step Drill Bits Step Drill Bits Milwaukee Step Drill Bits with JAM-FREE Performance feature a dual-flute design delivering up to 2X faster hole times,

More information

BREAKING, DRILLING & FIXING

BREAKING, DRILLING & FIXING 15 Hire Depots - Serving South, West & North of England 74 BREAKING, DRILLING & FIXING 18v CORDLESS DRILL 18v variable speed percussion drill for masonry drilling and screw driving. Perfect when working

More information

Pliers. Pliers PLIERS

Pliers. Pliers PLIERS Pliers Pliers PILERS Long Nose Pliers With Side Cutter Comfortable two-component handles combine durability with a secure non-slip grip. High-leverage joint placement increases leverage to reduce the cutting

More information

BITS, NUTSETTERS, ADAPTERS

BITS, NUTSETTERS, ADAPTERS BITS, NUTSETTERS, ADAPTERS Square Recess Power Driver Bits... Colour-Coded Square Recess Power Driver Bits... Phillips Power Driver Bits... 6 Colour-Coded Phillips Power Driver Bits... 7 Six Lobe Power

More information

TOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER

TOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The

More information

Pneumatic & Hydraulic

Pneumatic & Hydraulic Pneumatic & Hydraulic Drill Features Guide Wheels for fast repositioning for all self-propelled machines Bolt On Guide Wheels allows drilling within 152mm of corner Heavy-Duty Feed Cylinders with oversized

More information

April 2018 Edition STANDARD DUTY

April 2018 Edition STANDARD DUTY April 2018 Edition STANDARD DUTY INDUSTRIAL POWER TOOLS Index Angle Grinder 4 Belt Sander 4 Blower 6 Circular Saw 5 Compound Mitre Saw 5 Demolition Hammer 3 Drill 3 Jig Saw 5 Finishing Sander 4 Rotary

More information

Carbide Tipped Hole Cutters

Carbide Tipped Hole Cutters Carbide Tipped Hole Cutters The solution for drilling holes in sheet metal up to /8 thick Deliver more holes per charge in battery-powered drills Cut thin materials, including stainless steel, quickly

More information

SAWING & CUTTING. Technical Data. Power Rating 2000w. Technical Data. 115mm/4.5" 1.45kg. Power Rating 2400w

SAWING & CUTTING. Technical Data. Power Rating 2000w. Technical Data. 115mm/4.5 1.45kg. Power Rating 2400w SAWING & CUTTING DIAMOND BLADES AGR-ANG5 18.50 23.00 29.00 CUTTING WHEELS Health & Safety Contact your local depot for information on training that is available and for the selection and safe mounting

More information

317 Hammers. General Tools CLAW HAMMER - STEEL CLAW HAMMER - STEEL CLAW HAMMER - FIBREGLASS CLAW HAMMER - STEEL CLAW HAMMER - FIBREGLASS

317 Hammers. General Tools CLAW HAMMER - STEEL CLAW HAMMER - STEEL CLAW HAMMER - FIBREGLASS CLAW HAMMER - STEEL CLAW HAMMER - FIBREGLASS Rubber for secure grip One piece construction MTS3475 Professional for wood working Superbly balanced with head and shaft forged in one piece from selected tool steel with a full mirror polish surface

More information

HUMCO Miscellaneous. Whirl Away Surface Prep Tools. Surface Prep Tools 4INWHIRLAWAYTOOL 6INWHIRLAWAYTOOL

HUMCO Miscellaneous. Whirl Away Surface Prep Tools. Surface Prep Tools 4INWHIRLAWAYTOOL 6INWHIRLAWAYTOOL St. Louis, MO 637 Whirl Away Surface Prep Tools Surface Prep Tools 4INWHIRLAWAYTOOL Attaches to most sanders, grinders, drills, polishers, (electric, pneumatic, hydraulic) Built in safety guard Balanced

More information

POWER TOOL ACCESSORIES PROMOTION

POWER TOOL ACCESSORIES PROMOTION POWER TOOL ACCESSORIES PROMOTION BUY $100 in Accessories Any Mix & GET a $2 DRIVEKORE Gift Card GET a $2 DRIVEKORE Gift Card Offer available on all in stock accessories and any special order accessories.

More information

MAKO EC EXTENDED CABINET

MAKO EC EXTENDED CABINET MAKO EC EXTENDED CABINET INSTALLATION GUIDE VERSION 2.0 TDN 0702-00033 03/0 CORPORATE HEADQUARTERS: RMA (RETURN MATERIAL AUTHORIZATION) RETURN ADDRESS: 522 E. Railroad Street 2405 B Street Long Beach,

More information

TOOLS FOR THE SPECIALIST UNDERWATER TOOLS

TOOLS FOR THE SPECIALIST UNDERWATER TOOLS TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces

More information

Heavy-Duty Needle Scalers

Heavy-Duty Needle Scalers Heavy-Duty Needle Scalers Heavy-Duty Needle Scalers Ideal for cleaning and stress-relieving weld seams and joints; texturing concrete; removing coatings, corrosion and other accumulated materials. Power

More information

Complete line of Holemaking Products and Accessories

Complete line of Holemaking Products and Accessories Complete line of Holemaking Products and Accessories I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related

More information

HAND TOOLS. 30m Metal Chalk Line Reel. Cold Chisels. 30m Replacement Chalk Lines. Alloy Cold Chisels - Premium. FatMax Xtreme Chalk

HAND TOOLS. 30m Metal Chalk Line Reel. Cold Chisels. 30m Replacement Chalk Lines. Alloy Cold Chisels - Premium. FatMax Xtreme Chalk HAND TOOLS chisels - cold 30m Metal Chalk Line Reel Durable, heavy-duty die cast body for extra long life. Long wearing felt gasket. Can be used as plumb bob. : 47.099 30m Replacement Chalk Lines High

More information

SAW ARBORS B MADE IN THE * * * * * * * USA USA * * * * * * * A B C D E SSA-500

SAW ARBORS B MADE IN THE * * * * * * * USA USA * * * * * * * A B C D E SSA-500 SAW ARBORS B SIDE MILLING SAW ARBORS With Quad Key Drive Assist FEATURES: The only SEMI-FLUSH keyed (removable) arbor for cutter with or without a drive key.0004 TIR Made from domestic 4340 aircraft alloy

More information

Accessories Catalogue 2014 / 15

Accessories Catalogue 2014 / 15 ccessories Catalogue 2014 / 15 2 Contents Page No. brasive Paper 100 102 ngle Grinder System ccessories / FIXTEC Nut 97 98 and Saw lades 121 atteries 150 iscuit Jointer ccessories 142 Caulk and dhesive

More information

Fast and flexible use Powerful results

Fast and flexible use Powerful results Fast and flexible use Powerful results CORDLESS DRILLS AND BITS DRILL BIT GUIDE Turbo Stone Brad Point Bit Flat Wood Bit Lewis Auger Bit HSS-G Super-Pro Twist Drill Multimat Allmat Ceramic Master Concrete

More information

ASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?

ASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools? ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and

More information

IWB-12 - Industrial Work Bench

IWB-12 - Industrial Work Bench IWB-12 - Industrial Work Bench 1200 x 750 x 900mm 1000kg Load Capacity Ex GST Inc GST $270.00 $297.00 ORDER CODE: A415 MODEL: Type: IWB-12 Steel with Laminated Top Table Top Load Capacity (kg): Number

More information

Mag_Catalog Final 11/3/10 11:16 AM Page 1

Mag_Catalog Final 11/3/10 11:16 AM Page 1 Mag_Catalog 2010-3Final 11/3/10 11:16 AM Page 1 Mag_Catalog 2010-3Final 11/3/10 11:16 AM Page 3 C O N T E N T S DRILLBITS AUGER BITS: Nailbomber Moly Coated / Ship Head Heavy Duty (357DLX, 303DLX)....................4

More information

TOOLS FOR THE SPECIALIST UNDERWATER TOOLS

TOOLS FOR THE SPECIALIST UNDERWATER TOOLS TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces

More information

CATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS

CATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS CATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS FERM PROFESSIONAL TOUGH TOOLS FOR THE PROFESSIONAL FERM, founded in 1965, is one of the leading European power tool brands. Our headquarters is based in

More information

Sectional HDD Reamer Package

Sectional HDD Reamer Package Sectional HDD Reamer Package Recommended for Sand, Soft Soil, Sand Stone, Coral Mix and Gravel Carbides Internally welded leaving an external groove. Using a thin grinder blade, worn out carbides can be

More information

Stripping Supplies from Wagner.

Stripping Supplies from Wagner. Stripping Supplies from Wagner. Stripping Pins Stripping Pins - available in the sizes and styles shown above. 50 mm tall (2 ). All base sizes are the same (4mm) for consistent drilling and laser cutting

More information