HM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand
|
|
- Emmeline Russell
- 5 years ago
- Views:
Transcription
1 HM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand Ex GST Inc GST $4, $3, $4, $4, Special Ends 30/06/2018 ORDER CODE: MODEL: Digital Readout: Type: Table Size (mm): Column Type: Spindle Taper - Vertical: Spindle Taper - Horizontal: Longitudinal Travel (X-Axis) (mm): Cross Travel (Y-Axis) (mm): Vertical Travel (Z-Axis) (mm): Type of Slides: Ram Travel (mm): Spindle to Table (mm): Quill Travel / Diameter (mm): Throat Depth (max.) (mm): Tilting Head (Left Right): Tilting Head (Forward Back): Drilling Capacity (mm): End Milling Capacity (mm): Face Milling Capacity (mm): Power Feed - Quill (mm/rev): Power Feed - Longitudinal (X-Axis) (mm/min): Power Feed - Cross (Y-Axis) (mm/min): Power Feed - Vertical (Z-Axis) (mm/min): Table T-Slot Size (inch / mm): Work Table Load Capacity (kg): Spindle Speeds Vertical (No./ rpm): Spindle Speeds Horizontal (No./ rpm): Motor Power - Vertical (kw / hp): Motor Power - Horizontal (kw / hp): Voltage / Amperage (V / amp): Shipping Dimensions (L x W x H) (cm): Nett Weight (kg): M126D HM-48 3-Axis Digital Readout Vertical 820 x 240 Dovetail 3MT 540* 185* 410* Dovetail / ±90º Fixed Yes ( ) 1.5 / / x 95 x Features 3 Axis digital readout system Gear driven head with 6 speeds Dovetail vertical Z-Axis Digital tilting head gauge Mill head tilts to ±90º from vertical with digital display Large 820 x 240mm ground work table with T-slots Adjustable leadscrew nuts eliminating backlash on both axis Fine feed hand wheel operating quill feed Digital depth display with zero reset for quill (Includes LR44 battery) Longitudinal X-Axis power feed Motorised head for Z-Axis travel Forward and reverse on/off switch 3MT spindle with 75mm diameter lockable quill Adjustable table and drill length stops Metric dial 0.05mm for X & Y-Axis Rear slide-way cover and slide clamps on all axis Table lock on both axis Heavy duty fabricated stand with coolant tray Includes stand, coolant system, swarf tray, drill chuck & arbor, face mill cutter & arbor & work light * Note: X, Y & Z travels maybe reduced due to digital readout scales and safety stops Includes 3 Axis digital readout system Heavy duty fabricated stand Page 1 of 8
2 Coolant system X-Axis power feed unit Motorised vertical head motor Digital depth display Digital tilting head gauge Halogen light Drill chuck & arbor Face mill cutter & arbor Safety cutter guard Machine stand Specific Features Front View Left View Rear View Right View Close up Front View Close Up Left View Close Up Left Side View Right Side View Swivel Head 45 Degrees Swivel Head 45 Degrees Front View 3 Axis Digital Readout Control Panel Page 2 of 8
3 Swivel Head Scale Swivel Head Digital Angle Scale Spindle Speed Controls Quill Depth Stop Gauge Digital Readout On Quill Depth Spindle Speeds Chart Quill Handle Flexible Coolant Hose Vertical Axis Limit Switch Motorised Vertical Axis Table Feed Hand Wheel Power Feed X Axis Table Limit Switches Work Table Digital Readout Scales Vertical Axis Locks & Limit Micro Switches Page 3 of 8
4 Vertical Axis Dovetail Slide Slide Covers Drawbar Drawbar Cover Includes Milling Cutter Work Light Safety Cutter Guard Coolant System Coolant Return Drain Hose Includes Drill Chuck & Arbor, Milling Cutter, Digital Angle Gauge & Tools Page 4 of 8
5 Recommended Accessories C0965 C922B C926 M3301 Clamp Kit 58 piece - Workshop Series Collet & Chuck Set - 8 Piece Collet & Chuck Set - 20 Piece Metric HSS Slot Drill & End Mill Set - 10 Piece M3321 M182 M192 M180 Imperial HSS Slot Drill & End Mill Set - 10 Piece Precision Boring Head Kit Boring Head Shank Boring Bar Set - 9 piece Page 5 of 8
6 M250 M530 M562 M515 Parallel Set - 8 Piece Universal Milling Kit - 3 Piece Face Mill Arbor Face Mill 45º - Super High-Rake L065 M528 M529 L066 KYOCERA Carbide Inserts Milling Face Mill 90º - Positive Rake Face Mill 90º - Positive Rake KYOCERA Carbide Inserts Milling V004 V105 R006 P235 Cast Iron Vee Block K-Type Milling Vice Rotary Table Coolant Pump & Tank Page 6 of 8
7 S090A S090 L341 L3455 Soluble Metal Cutting Fluid - 1 Litre Soluble Metal Cutting Fluid - 5 Litre Fitting and Machining Technical Book Professional Sheet Metal Fabrication Book L345 L300 M9991 M800 Handy Workshop Tips & Techniques - 1st Edition Magnetic Clean up Tool Magnetic Floor Sweeper Rubber Mat - Anti-Fatigue M805 M780 M781 M782 Rubber Mat - Anti-Fatigue Industrial Flooring Tiles Workshop Industrial Flooring Tiles Workshop Industrial Flooring Tiles Workshop Page 7 of 8
8 O000 O043 O042 O040 SpillFix Universal Orgainic Absorbent FLUFILM Rust & Corrosion Preventive Penetrant & Lubrication FLUFILM General Purpose Lubricant & Corrosion Inhibitor FLUFILM Rust & Corrosion Preventive Penetrant & Lubrication O044 FLUFILM Rust & Corrosion Preventive Penetrant & Lubrication Powered by TCPDF ( Page 8 of 8
HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand
HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand Ex GST Inc GST $3,790.00 $3,280.00 $4,358.50 $3,772.00 Special Ends 30/06/2018
More informationHM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,600.00 $2,860.00 ORDER CODE: M124 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
More informationHM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,470.00 $2,840.50 ORDER CODE: M123 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
More informationMH-28V - Mill Drill - Geared & Tilting Head (X) 430mm (Y) 220mm (Z) 355mm Electronic Variable Speeds & Dovetail Column
MH-28V - Mill Drill - Geared & Tilting Head (X) 430mm (Y) 220mm (Z) 355mm Electronic Variable Speeds & Dovetail Column Ex GST Inc GST $2,290.00 $2,519.00 ORDER CODE: MODEL: Digital Readout: Type: Table
More informationHM-32 - Mill Drill - Belt Drive (X) 540mm (Y) 190mm (Z) 410mm
HM-32 - Mill Drill - Belt Drive (X) 540mm (Y) 190mm (Z) 410mm On Sale Ex GST Inc GST $1,850.00 $1,690.00 $2,035.00 $1,859.00 ORDER CODE: M121 MODEL: Digital Readout: HM-32 Optional Type: Vertical Table
More informationBF-20LV - Opti-Mill Drill - Geared & Tilting Head (X) 480mm (Y) 175mm (Z) 280mm Electronic Variable Speeds & Dovetail Column
BF-20LV - Opti-Mill Drill - Geared & Tilting Head (X) 480mm (Y) 175mm (Z) 280mm Electronic Variable Speeds & Dovetail Column Ex GST Inc GST $1,690.00 $1,859.00 ORDER CODE: MODEL: Digital Readout: Type:
More informationHM-54GV - Turret Milling Machine Inverter Variable Speed, Geared Head Horizontal & Vertical
HM-54GV - Turret Milling Machine Inverter Variable Speed, Geared Head Horizontal & Vertical Ex GST Inc GST (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System $7,250.00 ORDER
More informationHM-50 - Turret Milling Machine Package with Digital Readout & Tooling Accessories (X) 600mm (Y) 220mm (Z) 340mm
HM-50 - Turret Milling Machine Package with Digital Readout & Tooling Accessories (X) 600mm (Y) 220mm (Z) 340mm ORDER CODE: MODEL: Digital Readout: Type: Table Size (mm): Column Type: Spindle Taper - Vertical:
More informationHM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System
HM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System Ex GST Inc GST $5,500.00 $6,325.00 ORDER CODE: MODEL: Digital Readout: Type: Table Size
More informationTU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head
TU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head Package Deal Ex GST Inc GST $3,850.00 $4,235.00 Package Contents - SAVE $209.00 (Inc) 1 x L691
More informationTU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head
TU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head Package Deal Ex GST Inc GST $3,980.00 $4,577.00 Package Contents - SAVE $402.50 (Inc) 1 x L691
More informationTU-2004V - Opti-Turn Bench Lathe 200 x 300mm Turning Capacity Electronic Variable Speeds
TU-2004V - Opti-Turn Bench Lathe 200 x 300mm Turning Capacity Electronic Variable Speeds Ex GST Inc GST $1,150.00 $1,265.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle
More informationAL Centre Lathe 300 x 900mm Turning Capacity Includes Cabinet Stand
AL-336 - Centre Lathe 300 x 900mm Turning Capacity Includes Cabinet Stand Ex GST Inc GST $4,150.00 $4,565.00 ORDER CODE: MODEL: L682 AL-336 Swing Over Bed (mm): 300 Distance Between Centres (mm): 900 Spindle
More informationAL-960B - Centre Lathe 305 x 925mm Turning Capacity Includes Digital Readout & Cabinet Stand
AL-960B - Centre Lathe 305 x 925mm Turning Capacity Includes Digital Readout & Cabinet Stand Ex GST Inc GST $5,690.00 $6,259.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle
More informationGHD-38B - Industrial 4MT Geared Head Drilling Machine 40mm Drilling Capacity Includes Automatic Feed & Tapping
GHD-38B - Industrial 4MT Geared Head Drilling Machine 40mm Drilling Capacity Includes Automatic Feed & Tapping Ex GST Inc GST $3,790.00 $4,169.00 ORDER CODE: MODEL: Drilling Capacity (mm): Thread Tapping
More informationMotor Power (kw / hp): Voltage / Amperage (V / amp): Shipping Dimensions (L x W x H) (cm): Nett Weight (kg): Features
AL-356V - Centre Lathe 356 x 1000mm Turning Capacity - 51mm Spindle Bore Includes Digital Readout, Quick Change Toolpost & Electronic Variable Speed With Digital Readout Ex GST Inc GST $7,150.00 $7,865.00
More informationTU-3008G - Opti-Turn Bench Lathe 300 x 700mm Turning Capacity Geared Head-Stock & Enclosed Gearbox
TU-3008G - Opti-Turn Bench Lathe 300 x 700mm Turning Capacity Geared Head-Stock & Enclosed Gearbox Ex GST Inc GST $3,460.00 $3,979.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm):
More informationHAFCO METALMASTER HM-51. Turret Milling Machine. (X) 600mm (Y) 220mm (Z) 310mm. Product Brochure
Product Brochure M576 HAFCO METALMASTER HM-51 Turret Milling Machine (X) 600mm (Y) 220mm (Z) 310mm Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-06-26 M576.pdf Left
More informationAL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity
AL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity Ex GST Inc GST $3,200.00 $3,680.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle Bore (mm):
More informationAL-960B - Centre Lathe 305 x 925mm Turning Capacity Includes Cabinet Stand
AL-960B - Centre Lathe 305 x 925mm Turning Capacity Includes Cabinet Stand Ex GST Inc GST $4,690.00 $5,159.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle Bore (mm): Swing
More informationProduct Brochure For L682D. Description. Features. Auckland: (09)
AL-336D DELUXE - Centre Lathe 300 x 900mm Turning Capacity Includes Digital Readout, Quick Change Toolpost, Leadscrew Covers, Foot Brake & Cabinet Stand Ex GST Inc GST $5,200.00 $5,980.00 ORDER CODE: MODEL:
More informationBD Bench Drill - Belt Drive 16mm Drill Capacity 2MT
BD-325 - Bench Drill - Belt Drive 16mm Drill Capacity 2MT Ex GST Inc GST $320.00 $352.00 ORDER CODE: MODEL: Type - Bench / Pedestal : Duty Type: Drill Capacity (mm): Spindle Taper (MT): Spindle Travel
More informationTurret Milling Machine Geared Head Horizontal - Vertical
Product Brochure M163D HAFCO METALMASTER HM-52G Turret Milling Machine Geared Head Horizontal - Vertical (X) 600mm (Y) 200mm (Z) 340mm Page 1 of 5 Specifications & Prices are subject to change without
More informationHAFCO METALMASTER HM-50. Turret Milling Machine. (X) 600mm (Y) 200mm (Z) 340mm. Product Brochure
Product Brochure M160D HAFCO METALMASTER HM-50 Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-11-02 M160D.pdf
More informationPD Pedestal Drill - Belt Drive 28mm Drill Capacity 3MT
PD-440 - Pedestal Drill - Belt Drive 28mm Drill Capacity 3MT Ex GST Inc GST $780.00 $858.00 ORDER CODE: MODEL: Type - Bench / Pedestal : Duty Type: Drill Capacity (mm): Spindle Taper (MT): D598 PD-440
More informationTU-1503V - Opti-Turn Bench Lathe - Mini 150 x 300mm Turning Capacity Electronic Variable Speeds Ex GST Inc GST $ $908.50
TU-1503V - Opti-Turn Bench Lathe - Mini 150 x 300mm Turning Capacity Electronic Variable Speeds Ex GST Inc GST $790.00 $908.50 ORDER CODE: L685 MODEL: TU-1503V Swing Over Bed (mm): 150 Distance Between
More informationSBD-25A - Bench Drill 20mm Drill Capacity 2MT
SBD-25A - Bench Drill 20mm Drill Capacity 2MT ORDER CODE: D144 MODEL: SBD-25A Type - Bench / Pedestal : Bench Duty Type: Heavy-Duty Drill Capacity (mm): 20 Spindle Taper (MT): 2 Spindle Travel (mm): 80
More informationQLD Schools / TAFE - AL-356 Centre Lathe with Digital Readout - Includes Tooling Package 356 x 1000mm
QLD Schools / TAFE - AL-356 Centre Lathe with Digital Readout - Includes Tooling Package 356 x 1000mm Please Call ORDER CODE: K8710D NSW Contract No.: ~ QLD Contract No.: MODEL: Digital Readout: ~ Schools/TAFE
More informationCL-38A - Centre Lathe 410 x 1000mm Turning Capacity - 52mm Spindle Bore Includes Digital Readout & Quick Change Toolpost
CL-38A - Centre Lathe 410 x 1000mm Turning Capacity - 52mm Spindle Bore Includes Digital Readout & Quick Change Toolpost Ex GST Inc GST $9,490.00 $10,439.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance
More informationTM-1960G - Centre Lathe 480 x 1500mm Turning Capacity - 80mm Spindle Bore Includes Digital Readout
TM-1960G - Centre Lathe 480 x 1500mm Turning Capacity - 80mm Spindle Bore Includes Digital Readout Ex GST Inc GST $23,900.00 $27,485.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres
More informationHAFCO METALMASTER BM-30A. Turret Milling Machine. (X) 760mm (Y) 360mm (Z) 430mm. Product Brochure
Product Brochure M603D HAFCO METALMASTER BM-30A Turret Milling Machine (X) 760mm (Y) 360mm (Z) 430mm Page 1 of 5 Specifications & Prices are subject to change without notification - 2019-03-27 M603D.pdf
More informationHAFCO METALMASTER BM-90HV. Turret Milling Machine - Horizontal - Vertical. (X) 1120mm (Y) 520mm (Z) 440mm. Product Brochure
Product Brochure M633D HAFCO METALMASTER BM-90HV Turret Milling Machine - Horizontal - Vertical (X) 1120mm (Y) 520mm (Z) 440mm Page 1 of 5 Specifications & Prices are subject to change without notification
More informationOpti-Turn Lathe & Mill Drill Combination Package Deal
Product Brochure K146 OPTIMUM TU-2506V-16M Opti-Turn Lathe & Mill Drill Combination Package Deal 250 x 550mm Page 1 of 7 Front View Lathe Toolpost Removed For Milling Application Left View Without Toolpost
More informationOPTIMUM TU-3008G. Opti-Turn Bench Lathe. 300 x 700mm Turning Capacity. Product Brochure
Product Brochure L691 OPTIMUM TU-3008G Opti-Turn Bench Lathe 300 x 700mm Turning Capacity Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-10-30 L691.pdf Right Front
More informationHAFCO METALMASTER AL-335F. Centre Lathe. 300 x 910mm Turning Capacity. Product Brochure
Product Brochure L681 HAFCO METALMASTER AL-335F Centre Lathe 300 x 910mm Turning Capacity Page 1 of 6 Front View Left View Headstock Spindle Speed Levers Control Panel Switches Feed and Thread Gearbox
More informationMC-370CE - Soco Cold Saw, Includes Stand 100 x 100mm Rectangle Capacity Dual Speed 22 / 44rpm & Self Centring Vice & CE Approved Guarding
MC-370CE - Soco Cold Saw, Includes Stand 100 x 100mm Rectangle Capacity Dual Speed 22 / 44rpm & Self Centring Vice & CE Approved Guarding Ex GST Inc GST $5,590.00 $5,290.00 $6,149.00 $5,819.00 Special
More informationHAFCO METALMASTER AL-336. Centre Lathe. 300 x 900mm Turning Capacity. Product Brochure
Product Brochure L682 HAFCO METALMASTER AL-336 Centre Lathe 300 x 900mm Turning Capacity Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-10-08 L682.pdf Headstock Metric
More informationHAFCO METALMASTER AL-335. Centre Lathe. 300 x 910mm Turning Capacity. Product Brochure
Product Brochure L183 HAFCO METALMASTER AL-335 Centre Lathe 300 x 910mm Turning Capacity Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-10-08 L183.pdf Headstock Speed
More informationOPTIMUM TU-2506V. Opti-Turn Bench Lathe. 250 x 550mm Turning Capacity. Product Brochure
Product Brochure L689 OPTIMUM TU-2506V Opti-Turn Bench Lathe 250 x 550mm Turning Capacity Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-10-30 L689.pdf Front View
More informationHAFCO METALMASTER AL-960B. Centre Lathe. 305 x 925mm Turning Capacity. Product Brochure
Product Brochure L237D HAFCO METALMASTER AL-960B Centre Lathe 305 x 925mm Turning Capacity Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-09-19 L237D.pdf 2 Axis DRO
More informationHAFCO METALMASTER AL-960B. Centre Lathe. 305 x 925mm Turning Capacity. Product Brochure
Product Brochure L237 HAFCO METALMASTER AL-960B Centre Lathe 305 x 925mm Turning Capacity Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-09-19 L237.pdf Head Stock
More informationAffordable Durable, Variable Speed Vertical Mills... Delivering all the power, precision & versatility you need in today s Toolrooms.
1 of 5 23/10/2007 9:53 PM Affordable Durable, Variable Speed Vertical Mills... Delivering all the power, precision & versatility you need in today s Toolrooms Overview Standard Features DRO Specifications
More information$42, $46, Product Brochure For S961. Features
HG-3212VR - 3200 x 12mm Mild Steel Shearing Capacity 1-Axis Ezy-Set NC-89 Go-To Control & Hardened Ballscrew Backgauge ORDER CODE: MODEL: Ex GST Inc GST $42,500.00 $46,750.00 S961 HG-3212VR Shearing Capacity
More informationM910 - Heavy Duty Wood Lathe 520mm Swing x 975mm Between Centres $4, $4, Product Brochure For W685. Features.
M910 - Heavy Duty Wood Lathe 520mm Swing x 975mm Between Centres Ex GST Inc GST $4,150.00 $4,565.00 ORDER CODE: W685 MODEL: M910 Swing Over Bed (mm): 520 Between Centres (mm): 975 Spindle Nose Thread:
More informationHEAVY DUTY BENCH GRINDERS
HEAVY DUTY BENCH GRINDERS BGC-6 (240153) / BGC-8 (240154) Heavy duty construction for maximum service life CSA electrics for safety and reliability All ball bearing construction Steel wheel covers with
More informationPS Panel Saw Ø315mm Max. Blade Diameter $2, $2, Product Brochure For W700. Description. Features
PS-1810 - Panel Saw Ø315mm Max. Blade Diameter Ex GST Inc GST $2,690.00 $2,959.00 ORDER CODE: W700 MODEL: PS-1810 Max. Blade Diameter (mm): Ø315 Table Size (W x H) (mm): 820 x 800 Table Size With Extensions
More informationTHE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines
THE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines turning milling drilling WABECO lathes > D2000 D2400 D3000 precise lead screw lathe in-house design and production the classics - tried
More informationVHF 3 VHF 3. Universal Milling Machine. Rigid Universal Milling Machine for drilling and milling, with large travels.
Universal Milling Machine Rigid Universal Milling Machine for drilling and milling, with large travels incl. 3-axis position indicator travel distances X axis 750 mm Y axis 280 mm Z axis 430 mm speed range
More informationMachining Technology Equipment Purchases
Allegany College of Maryland Machining Technology Equipment Purchases Equipment Specifications Michael Chronister 11-8-2018 Michael Chronister Advanced Manufacturing Project Manager 12401 Willowbrook RD
More informationWF 400 MA WF 600 MA Universal Milling Machine
WF 600 MA Universal Milling Machine WF 600 MA _ Easy and Manageable WF 400 MA universality The main spheres of application for the WF 400 MA and the WF 600 MA are workshops and training as well as the
More informationDRILLING AND MILLING MACHINES
DRILLING AND MILLING MACHINES KF 10 KF 10 L KF 20 KF 20 L KF 20 Super KF 20 L Super KF 16 L Vario KF 25 D Vario KF 25 L Vario KF 25 PRO BF 25 Super BF 25 L Super BF 30 Super FM 45 eco BF 40 eco FM 40 FM
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 80 mm versatile for many applications for
More informationBD-405 MINI LATHE BD-712 METAL LATHE. Distance between centers Hole through spindle. Cross slide travel
BD-405 MINI LATHE Cast iron with ground, hardened slideways Belt driven, with variable speed self-centring 3 jaw scroll chuck Chuck guard with a safety interlock Supplied with 3 jaw chuck, wrench set and
More informationHS120 - Table Saw Ø315mm Max. Blade Diameter
HS120 - Table Saw Ø315mm Max. Blade Diameter Ex GST Inc GST $450.00 $495.00 ORDER CODE: MODEL: Max. Blade Diameter (mm): Table Size (W x H) (mm): Table Size With Extensions (mm): Max. Depth Of Cut 90º
More informationWORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
More information.com More than a machine. Power your life
Heavy Duty Swivel Head Bed-Type Universal Milling Machine Ideal for Machining Large Work-pieces This kind of MM-KB2100 is the Heavy Duty Swivel Head Bed-Type Universal Milling Machine featuring large cross
More information$99, $109, Product Brochure For S8892. Description. Features
APHS-41160 - Hydraulic CNC Pressbrake 160T, 5 Axis, Delem DA58T Touch Screen Control Includes Programmable X, Y1, Y2, V & R-Axis. CNC Table Crowning & Laser Guarding System Ex GST Inc GST $99,500.00 $109,450.00
More informationWORKSHOP EQUIPMENT inc GST ORDER CODE: B inc GST
WORKSHOP EQUIPMENT RNB40 NUT & BLIND RIVETER SET 130 piece kit suitable for sheet aluminium, steel & stainless Includes: Aluminium rivet nut inserts: M5, M6, M8, M10 - (10 of each size) Blind aluminium
More informationMultipurpose Milling Machine Servomill 700. Conventional Multipurpose Milling Machine.
Multipurpose Milling Machine Conventional Multipurpose Milling Machine For workshop application, single parts production and training purposes Servo motors and preloaded ball screws on all axes Infinitely
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationPerfect in precision. F1200 No D6000 No , , , , basic equipment includes: basic equipment includes:
Perfect in precision tool holder ISO30 work table 450 x 180 mm F1200 No. 11905 2,249.00 3,309.39 longitudial travel X-axis 260 mm transverse travel Y-axis 150 mm 1.4 kw, 140-3000 RPM main spindle bore
More informationServomill. Multipurpose Milling Machine Servomill. Conventional Multipurpose Milling Machine.
Multipurpose Milling Machine Conventional Multipurpose Milling Machine for workshop applications, single parts production and training purposes Servo motors and preloaded ball screws on all axes infinitely
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 3" versatile for many applications for
More informationSTC-COMBI - Industrial Storage & Tooling Cabinet Package Deal
STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal 900 x 450 x 1800mm 150kg Shelf Load & 75kg per Drawer Load Capacity Ex GST Inc GST $1,060.00 $1,166.00 ORDER CODE: MODEL: Shelf Load Capacity
More informationENGLISH YOUR PARTNER SINCE 1976
ENGLISH YOUR PARTNER SINCE 1976 2008 2 Epple Maschinen are suppliers of high quality products with an extensive sales programme that offers High Quality manufacturing with an excellent price-quality ratio.
More informationA full Line of Mechanical Variable Speed and Electronic Variable Speed Knee Mills
www.clausing-industrial.com A full Line of Mechanical Variable Speed and Electronic Variable Speed Knee Mills Affordable, Durable and Versatile... three good reasons for putting a Clausing Vertical Knee
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationC SERIES LATHES AFFORDABLE. DURABLE. VERSATILE. A line of precision, high performance geared head and variable speed lathes. TURNING PRODUCT CATALOG
TURNING PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 C SERIES LATHES AFFORDABLE. DURABLE. VERSATILE. A line of precision, high performance geared head and variable speed lathes. HIGH SPEED
More informationMF 1 MF 1 V MF 1 MF 1 V. Multipurpose Milling Machines. Most widely used milling machine type word-wide!
Multipurpose Milling Machines Most widely used milling machine type word-wide! with 3 axes position indicator head swivels through 3 axes swivel r + l ± 90 ilt forward + reverse ± 45 rotation on the column
More informationMODEL G0759 MILL/DRILL w/stand & DRO MANUAL INSERT
MODEL G0759 MILL/DRILL w/stand & DRO MANUAL INSERT The Model G0759 is the same machine as the Model G0704 except the Model G0759 has a 3-axis DRO. Besides the differences noted in this insert, all other
More informationVHF 2 VHF 2. Vertical Milling Machine
Vertical Milling Machine VHF - ideal series for mechanic workshops, training, single part and replacement part manufacturing, and prototyping including 3-axis position indicator travel x-axis 600 mm y-axis
More informationBS-5V SWIVEL HEAD METAL CUTTING BAND SAW
2018 May - July BS-5V SWIVEL HEAD METAL CUTTING BAND SAW BS-4A METAL CUTTING BAND SAW BS-5S SWIVEL HEAD METAL CUTTING BAND SAW 150 x 100mm capacity 3 blade speeds Mitre vice 45º 1/2hp, 240V motor Compact
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationFPK 4 FPK 6 FPK 4 FPK 6. Tool Milling Machines. Universal Machine Tools including 3-axis position indicator.
Tool Milling Machines Universal Machine Tools including 3-axis position indicator FPK 4 Travel X-axis 15.7 / 12.2 in (man. / autom.) Table dimensions 12.6 x 29.5 in FPK 6 Travel X-axis 23.6 / 22 in (man.
More informationDrill presses
Drill presses 247 D019542_Jet_Catalog (247-257)247 247 7/1/2015 12:50:5 PM www.jet-professional.com Mini milling and drilling machine Mini milling and drilling machine Spindle speed readout Tapping function
More informationWF 400 MC WF 600 MC Universal Milling Machine
WF 00 MC Universal Milling Machine WF 00 MC_ Manual and CNC-operated CNC milling with contouring control Heidenhain TNC 320 Manual and CNC-operated The WF 00 MC and WF 00 MC are primarily used for training
More informationBSC Industrial Storage Cabinet
BSC-900 - Industrial Storage Cabinet 900 x 450 x 900mm 150kg Shelf Load Capacity Ex GST Inc GST $320.00 $368.00 ORDER CODE: MODEL: Shelf Load Capacity (kg): Drawer Load Capacity (kg): Dimensions (L x W
More informationEquipment Specifications: TEQIP-III/OD/PMEC 10 & 11 & 02. 3D Printer Specifications
Equipment Specifications: TEQIP-III/OD/PMEC 10 & 11 & 02 Tech Specifications 3D Printer Specifications Print size (X Y Z) (Not less than) 600 x 300 x 300 mm Print Speed- Range 55-75 mm/sec Layer Resolution
More informationGANESH GBM-2616 CNC Bed Mill With Class-7 Super-Precision Spindle Bearings and Box Ways
20869 Plummer St. Chatsworth, CA 91311 Toll Free: 888-542-6374 (US only) Phone: 818-349-9166 I Fax: 818-349-7286 www.ganeshmachinery.com GANESH GBM-2616 CNC Bed Mill With Class-7 Super-Precision Spindle
More informationIWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity
IWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity On Sale Ex GST Inc GST $599.13 $565.22 $689.00 $650.00 Package Contents - SAVE $148.10 (Inc) 1x 1x 4x 4x 1x 1x 1x
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationProduct Brochure For S884S. Description. Features. Sydney: (02) Brisbane: (07) Melbourne: (03) Perth: (08)
APHS-31120 - Hydraulic CNC Pressbrake 120T, 7 Axis, Delem DA69T Touch Screen Control Includes Programmable X, Y1, Y2, V, Z1, Z2 & R-Axis. CNC Table Crowning, Laser Guarding System & Rolleri ROL200 Quick
More informationUniversal Machining Chucks. 4-Jaw Vertical
Universal Machining Chucks 4-Jaw Vertical Parts are gripped firmly by the formed jaws, ensuring high precision (deviation within 0.03mm) Large workpieces can be held tight with the low profile vise body
More informationPrecision & Heavy Duty Machining
High Speed Precision Lathes Large capacity, Powerful, Universal & Precision ATRUMP 18, 21 and 25" Series Lathes have just the right amount of engineering to afford simplicity of operation, coupled with
More informationKB 2100 KB Bed-Type Milling Machine. Large machine bed, wide column, plus high intrinsic weight
Bed-Type Milling Machine Large machine bed, wide column, plus high intrinsic weight very long table travel (1,500 mm) and large table setup area travel (X/Y/Z) 1500 x 670 x 700 mm spindle speed (12) 40-1600
More informationWTC Industrial Mobile Tooling Cabinet Workstation
WTC-1450 - Industrial Mobile Tooling Cabinet Workstation 1170 x 580 x 1450mm 100kg per Drawer Ex GST Inc GST $1,050.00 $1,155.00 ORDER CODE: MODEL: T773 WTC-1450 Number of Drawers (No.): 5 Drawer Load
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationTCW Industrial Tooling Cabinet
TCW-1200 - Industrial Tooling Cabinet 881 x 653 x 1200mm 100kg per Drawer Ex GST Inc GST $1,070.00 $1,230.50 ORDER CODE: MODEL: T772 TCW-1200 Number of Drawers (No.): 7 Drawer Load Capacity (kg): 100 Maximum
More informationDRILLING CATALOG. GRAINGER.COM/CHOICE l Grainger
DRILLING CATALOG GRAINGER.COM/CHOICE l 1.800.Grainger DRILL PRESSES BENCH fact sheet 8" BENCH DRILL PRESS Dayton's light duty drilling machine combines performance and economy into one. It s an ideal choice
More informationIWB-40 - Industrial Work Bench
IWB-40 - Industrial Work Bench 1800 x 750 x 900mm 1000kg Load Capacity On Sale Ex GST Inc GST $398.00 $343.48 $457.70 $395.00 ORDER CODE: A420 MODEL: Type: IWB-40 Steel with Laminated Top Table Top Load
More informationInnovative woodworking machinery
MF30 Innovative woodworking machinery MOReTENs have been manufacturing woodworking machinery in Sweden for over 25 years. The innovative design of our machines is shaped by our customers needs, bringing
More informationTCW-900NP - Industrial Mobile Tooling Cabinet with Backing Panel
TCW-900NP - Industrial Mobile Tooling Cabinet with Backing Panel 565 x 580 x 1400mm 100kg per Drawer Package Deal Ex GST Inc GST $724.55 $797.00 Package Contents - SAVE $61.00 (Inc) 1x 1x 1x 1x T764 -
More informationHydraulic NC Guillotine & NC Panbrake Package Deal
Product Brochure K059 METALMASTER HG-2504 & PB-830T Hydraulic NC Guillotine & NC Panbrake Package Deal Ezy-Set NC-89 Guillotine - 2500 x 4mm, NC Ezy Touch Screen Panbrake 2500 x 4mm Page 1 of 6 Specifications
More informationGANESH GBM-4020 Heavy-Duty CNC Bed Mill With Class-7 Super-Precision Spindle Bearings and Box Ways
20869 Plummer St. Chatsworth, CA 91311 Toll Free: 888-542-6374 (US only) Phone: 818-349-9166 I Fax: 818-349-7286 www.ganeshmachinery.com GANESH GBM-4020 Heavy-Duty CNC Bed Mill With Class-7 Super-Precision
More informationIWB-12 - Industrial Work Bench
IWB-12 - Industrial Work Bench 1200 x 750 x 900mm 1000kg Load Capacity Ex GST Inc GST $270.00 $297.00 ORDER CODE: A415 MODEL: Type: IWB-12 Steel with Laminated Top Table Top Load Capacity (kg): Number
More informationTC Industrial Tooling Cabinet
TC-900 - Industrial Tooling Cabinet 900 x 450 x 900mm 75kg per Drawer Ex GST Inc GST $820.00 $700.00 $902.00 $770.00 Special Ends 25/11/2018 ORDER CODE: MODEL: Number of Drawers (No.): Drawer Load Capacity
More informationSSB-18WS - Stainless Steel Work Bench
SSB-18WS - Stainless Steel Work Bench 1800 x 700 x 900mm Ex GST Inc GST $430.00 $473.00 ORDER CODE: MODEL: Type: Table Top Load Capacity (kg): Number of Drawers (No.): Table Dimensions (L x W x H) (mm):
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationITB-48 - Industrial Tool Box (48") 2 x Gas Struts
ITB-48 - Industrial Tool Box (48") 2 x Gas Struts (1220 x 615 x 720mm) Ex GST Inc GST $400.00 $440.00 ORDER CODE: MODEL: Material Thickness (mm): Gas Struts (No.): Box Dimensions (L x D x H) (mm): Nett
More informationModel PM Series Three Axis Mills
Model PM Series Three Axis Mills PM3000 PM2000 Features Setup & Operation Technical Data CLIMAX Portable Machine Tools, Inc. 10/98 1 Features Climax's PM Series 3-axis portable milling machines provide
More information