Shaver System EBERLE C2
|
|
- Rebecca O’Neal’
- 5 years ago
- Views:
Transcription
1 Shaver System C2
2 Shaver System EBERLE C2
3 y n a m r e G n i M ade
4 Control Unit Hand Piece Foot Switch
5 Universal Motor Hand Piece
6 Shaver System Control Unit Foot Switch Control Unit Hand Piece casing material aluminum casing material steel Hand Piece for manual operation casing material aluminum casing material steel Hand Piece cutting blades min -1 oscillation mode min -1 burring min -1 Hand Piece for manual operation micro-processor controlled drive motor rotation, oscillation mode cutting blades min -1 oscillation mode min -1 burring min -1 6
7 Foot Switch Drill Chuck Adapter Cleaning Adapter for C2 hand pieces
8 Universal Motor Hand Piece for manual operation -1 Universal Motor Hand Piece Wire Driver Adapter Drill Chuck Adapter Sagittal Saw Adapter Wire Driver Adapter Drill Chuck Adapter Drill Chuck Adapter High Power Drill Chuck Adapter Sagittal Saw Adapter
9 Variety of the Shaver Blades C2 9
10 Shaver Blades reusable effective length 130 mm Full Radius Resector Full Radius Resector Sharp Cut Aggressive Full Radius Aggressive Full Radius Plus Double Full Radius Double Agressive Full Radius Conical Double Full Radius Full Radius Resector Small Window Meniscus Cutter Cutter
11 Cutter Plus Double Meniscus Cutter Side Cutter Round Burr Oval Burr Aggressive Oval Burr Tapered Burr effective length 130 mm, 15 bent Full Radius Resector cutting window points upward Aggressive Full Radius cutting window points upward Side Cutter cutting window points upward
12 Shaver Blades reusable for hip arthroscopy, effective length 210 mm Full Radius Resector Sharp Cut H Aggressive Full Radius H H H Meniscus Cutter H H Cutter H H H Cutter Plus H Round Burr H H Oval Burr H H Aggressive Oval Burr H H 12
13 for hip arthroscopy, effective length 210 mm, 15 bent Aggressive Full Radius H H for small joint surgery, effective length 70 mm Ø 2.0 mm Ø 2.5 mm Full Radius Resector Aggressive Full Radius Round Burr Cleaning Adapter for reusable C2 shaver blades
14 Shaver Blades single use effective length 130 mm, sterile packaging Full Radius Resector Full Radius Resector Sharp Cut Aggressive Full Radius Aggressive Full Radius Plus Double Full Radius Double Agressive Full Radius Conical Double Full Radius Full Radius Resector Small Window Meniscus Cutter Cutter
15 Cutter Plus Double Meniscus Cutter Round Burr Oval Burr Aggressive Oval Burr Tapered Burr effective length 130 mm, 15 bent, sterile packaging Full Radius Resector cutting window points upward Aggressive Full Radius cutting window points upward Ø 3,5 mm Ø 4,2 mm Ø 4,8 mm Ø 5,5 mm Ø 6,5 mm Side Cutter cutting window points upward
16 Shaver Blades single use for hip arthroscopy, effective length 210 mm, sterile packaging Full Radius Resector Sharp Cut H Aggressive Full Radius H H H Meniscus Cutter H H Cutter H H H Cutter Plus H Round Burr H H Oval Burr H H Aggressive Oval Burr H H 16
17 for hip arthroscopy, effective length 210 mm, 15 bent, sterile packaging Aggressive Full Radius H H for small joint surgery, effective length 70 mm, sterile packaging Ø 2.0 mm Ø 2.5 mm Full Radius Resector Aggressive Full Radius Round Burr
18 EBERLE GmbH & Co. KG Glasbronnenstraße Wurmberg Phone +49 (0) Fax +49 (0) info@eberle-med.de Distribution: Carl-Peschken-Straße 5c Moers Phone +49 (0) Fax +49 (0) sales@eberle-med.com
UNIDRIVE S III ARTHRO
ART 46-2 07/2013-E UNIDRIVE S III ARTHRO Your Complete Solution Arthroscopy UNIDRIVE S III ARTHRO Your Complete Solution Arthroscopy Whether the application is knee, shoulder, hip or a small joint, the
More informationAesculap Power Systems microspeed uni. Get the speed you need
Aesculap Power Systems microspeed uni Get the speed you need Get the speed you need. Small - powerful - inspiring This completely innovative high speed motor from Aesculap sets a new milestone in small
More informationmicrospeed uni Aesculap Get the speed you need Aesculap Power Systems
Aesculap Get the speed you need microspeed uni Aesculap Power Systems Get the speed you need. Small - powerful - inspiring This completely innovative high speed motor from Aesculap sets a new milestone
More informationWRIST ARTHROSCOPY SYSTEM
DESCRIPTION 1 1 lot 10,648,751.67 Brand new, not reconditioned including its Parts & Accessories 1. Wrist Arthroscope a. HD wide angle 30-degree small joint arthroscope i. One (1) short scope (1 piece)
More informationSmall Bone Power System
236041 Zimmer B 7/10/06 3:14 PM Page 1 Manufactured by: Distributed by: 236041 Zimmer B 7/10/06 3:14 PM Page 2 236041 Zimmer B 7/10/06 3:14 PM Page 3 Contents Introduction 2 High Speed Drill 3 Medium Speed
More informationPOWER. Rethinking Possibilities, Reshaping Lives
POWER Rethinking Possibilities, Reshaping Lives Territory Manager Information OsteoPower System Introduction Power Control Consoles & Footswitches Modular Motor Units Drill Modules Wire/Pin Driver Modules
More informationPOWER. Rethinking Possibilities, Reshaping Lives
POWER Rethinking Possibilities, Reshaping Lives General Information Territory Manager Information OsteoPower System Introduction Power Control Consoles & Footswitches Modular Motor Units Drill Modules
More informationmicrospeed uni Aesculap Get the speed you need Aesculap Power Systems
Aesculap Get the speed you need microspeed uni Aesculap Power Systems Relax the power is in your hand. Ergonomic, lightweight and quiet - exceptional! With a weight of under g and an out stan ding design,
More informationTotal Performance System THE ESSENCE OF POWER AND VERSATILITY IN A UNIVERSAL SURGICAL SYSTEM NEURO SPINE ENT SPORTS MED PLASTICS GEN.
NEURO SPINE ENT SPORTS MED PLASTICS GEN. ORTHOPEDICS ORAL/MAX Total Performance System THE ESSENCE OF POWER AND VERSATILITY IN A UNIVERSAL SURGICAL SYSTEM Attachments INNOVATION WITH ATTITUDE Burs UNIVERSAL
More informationMicroSurgical Power Tools
MicroSurgical Power Tools C.O.R.E Consolidated Operating Room Equipment Power Simplicity Versatility Customized Performance Standardization MicroSurgical Power Tools Consolidated Operating Room Equipment
More informationUniversal rotary hammer drill, 4 kg, SDS-plus. CHE 4-32 SDS-plus
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Universal rotary hammer drill, 4 kg, SDS-plus CHE 4-32 SDS-plus Order number 428.337 Universal rotary hammer drill, 4 kg, SDS-plus + 900
More informationAesculap ELAN 4. Surgeon`s Darlings for Precision, Performance and Pleasure.
Surgeon`s Darlings for Precision, Performance and Pleasure. Surgeon s Darlings for Precision and Performance Engineered in Germany. As a surgeon, I need to do the best job possible in order to maintain
More informationSpeedSurg. HighSpeed Micro Drill System
HighSpeed Micro Drill System 2 HighSpeed Micro Drill System The new HighSpeed drill system from Spiggle & Theis for maximum precision and versatility in ENT surgery for your clinic. With its unique safety
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationConstant Face Driver CoE. CoE: Retrofitting has time-out. Turning and milling in one set-up. Benefits and areas of application
Benefits and areas of application 11 CoE: Retrofitting has time-out Best for efficiently turning of workpieces along their entire Developed according to the construction set principle, length without re-clamping
More informationAesculap Power Systems HiLAN XS
Aesculap Power Systems HiLAN XS Pneumatic High Speed Power System HiLAN XS size redefined HiLAN XS Micro design perfection in every detail Revolutions start with small things. The extremely small HiLAN
More informationCutting, Drilling and Beveling
Pipe Hole Cutter JK150 The Hongli Model JK150 pipe hole cutter is designed to cut holes up to 152mm into steel pipe. The multiple hole sizes allow the use of Mechanical fittings for branching unpressurized
More informationSpecial Tools And Modified Standards. Some examples of specials and their uses
Special Tools And Modified Standards Tooling These special tools are designed to produce a complex hole shape in a single pass. They can incorporate as many steps, tapers, radii or contours as necessary.
More informationPrimado2 Product Lineup
PR-M033E Ver.1 12.04.015.A Primado2 Product Lineup Slim Motor Series Micro Bone Saw Series High Torque Motor Series Primado2 Slim Motor P12 Primado2 Micro Bone Saw P32-34 Primado2 High Torque Motor P20
More informationInstruments and Equipment for Knee Arthroscopy KNEE
Instruments and Equipment for Knee Arthroscopy KNEE Sheath System rthflow Sheath System All RZ ArthFLOW Arthroscope sheaths feature: 360 rotating stopcocks easy handling of suction/irrigation tubes Complete
More informationStraight and angled handpieces for surgery
Straight and angled handpieces for surgery Surgical instruments - technical characteristics PM RM 1122 / 1:1 ratio REF 1600206-001 REF 1600340-001 REF 1600341-001 PM AM 10121 / Reducing ratio of 10 REF
More informationCircular Cold Saws and Systems for every application. Competence in Circular Cold Sawing Technology
Circular Cold Saws and Systems for every application Competence in Circular Cold Sawing Technology 2 VMS-Range Vertical Circular Cold Saws Manual, semi-automatic and automatic machines Robust and durable.
More informationCompatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning Face clamping disc Ø 170 mm 3440295 Face clamping disc Ø 240 mm 3441352 Face clamping disc Ø 250 mm 3440552 Face clamping disc
More informationOverview. Linear Motion and Assembly Technologies /11 Aluminum Framing. Bosch Rexroth Corp. Section 15: Tools
8981 500 201 08/11 Aluminum Framing Linear Motion and Assembly Technologies 1 Section : Tools Overview With Bosch Rexroth aluminum structural framing, you can either specify profiles square cut to length,
More informationAviator Anterior Cervical Plating System System Overview. Visual and tactile confirmation Increased Angulation Simplified instrumentation
Aviator Anterior Cervical Plating System System Overview Visual and tactile confirmation Increased Angulation Simplified instrumentation The Aviator anterior cervical plating system offers a unique double
More informationCNCHOPPER A STEP AHEAD.
A STEP AHEAD. MZ PROJECT was established in 1987 as a manufacturer of automatic copying band saws for the furniture manufacturing and woodworking industries. Design, research and development and new technology
More informationVHF 2 VHF 2. Vertical Milling Machine
Vertical Milling Machine VHF - ideal series for mechanic workshops, training, single part and replacement part manufacturing, and prototyping including 3-axis position indicator travel x-axis 600 mm y-axis
More informationOmega Surgical Contact Info. Table of Contents. Introduction 1.0. Omega Signature Series Burs 1.1. Omega UltraLite Burs 2.1
Surgical Contact Info Table of Contents Section Page Introduction 1.0 TM Signature Series Burs 1.1 UltraLite Burs 2.1 DiaMax Oscillating s 3.1 Medtronic Xomed Replacement Burs 4.1 Linvatec /Zimmer Replacement
More informationMEDICAL ADVANCED TECHNOLOGY EMERGENCY REMOVAL UNIVERSAL EXTRACTION SET. for Intramedullary Nail System
MEDICAL ADVANCED TECHNOLOGY EMERGENCY REMOVAL UNIVERSAL EXTRACTION SET for Intramedullary Nail System introducing ourselve Manufacturer of surgical implants and medical devices. Solutions for patient orthopaedic
More informationOPERATOR S MANUAL OSADA EXL-M40 OSADA EXL OSI-2 OSADA, INC.
OPERATOR S MANUAL OSADA EXL-M40 OSADA EXL OSI-2 NEW Electric BRUSHLESS Laboratory MICROMOTOR Handpiece System SYSTEM FOR ORAL with SURGERY BRUSHLESS AND IMPLANT MICROMOTOR PREPARATIONS OSADA, INC. 30008436
More informationVHF 3 VHF 3. Universal Milling Machine. Rigid Universal Milling Machine for drilling and milling, with large travels.
Universal Milling Machine Rigid Universal Milling Machine for drilling and milling, with large travels incl. 3-axis position indicator travel distances X axis 750 mm Y axis 280 mm Z axis 430 mm speed range
More informationTOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER
TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The
More informationMEDICAL/SURGICAL CUTTING INSTRUMENTS
1-800-263-3557 The Cutting Edge of Tomorrow For Ophthalmic Products click on the logo below: MEDICAL/SURGICAL CUTTING INSTRUMENTS INTRODUCTION Surgistar, Inc. has been manufacturing high quality microsurgical
More informationpowerful, smart & reliable
HIGH PERFORMANCE BRUSHLESS MICROMOTOR WITH PRECISE TORQUE CONTROL powerful, smart & reliable Powerful Partners PRM014E Ver.2 10.04.02.A Contents NSK COMPANY INTRODUCTION P2 3 PRODUCT LINE UP P4 5 CONTROL
More information23 WOODWORKING EQUIPMENT
23 WOODWORKING EQUIPMENT Chisel Mortiser Chisel mortiser... 1199 Cutting Machine Heavy duty band saw... 1197 Scroll saw... 1197 Dust Collector Dust collector... 1201 Overarm Router Overarm router... 1202
More informationTravis Bishop. Submitted to: Dr. John Davis. Date: 3 December Course: ETME 310 Section: 004. Lab Topic: Milling Project (Vise)
Travis Bishop Submitted to: Dr. John Davis Date: 3 December 2012 Course: ETME 310 Section: 004 Lab Topic: Milling Project (Vise) Introduction: Purpose of Experiment: This experiment was conducted to teach
More informationDigital Compression Screw
Digital Compression Screw Surgical Technique Contents Product The BioPro Digital Compression Screw is a stainless steel lag screw designed for digital fusions. Table of contents Indications & Contraindications
More informationSPECIALIZED WATCH MAKING TOOLS 03 2 LATHES RIVETING STAKES 03 20
03 SPECIALIZED WATCH MAKING TOOLS 03 2 LATHES 03 12 RIVETING STAKES 03 20 SPECIALIZED WATCH MAKING TOOLS i Tools for locking/unlocking oscillating weight bolts. S Cal. 2892 and 7750 For calibres Base holder
More informationCompatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning TU 1503 TU 2004 TU 2304 TU 2404 TU 2506 TU 2807 D 320 TU 3209 D 330 D 360 TU 3610V TZ 4012 D 420 TU 4210V D 460 TU 4615V TZ 5216
More informationTOOLS FOR PROCESSING SOLID CORE- AND SOLID SURFACE MATERIALS
TOOLS FOR PROCESSING SOLID CORE- AND SOLID SURFACE MATERIALS Cutters, drill bits and circular saw blades for CNC-machines Whether it s acrylic resin panels, compact coatings, mineral materials or epoxy
More informationwith touch screen EXCERPT FROM CATALOG ENT UNIDRIVE S III ENT SCB
with touch screen EXCERPT FROM CATALOG ENT UNIDRIVE S III ENT SCB All pictures, photos and product descriptions are the intellectual property of KARL STORZ & Co. KG. Utilisation and copies by third parties
More informationV-Turn 410/ PRECISION LATHE
PRECISION LATHE Page 2. Highlights Page 3. Machine construction and feed system Page 3. Main spindle drive Page 4. Toolpost Page 4. Tailstock and auxiliary systems Page 5. 3 Axis Digital Read Out - X.pos
More informationWORKSHOP EQUIPMENT inc GST ORDER CODE: B inc GST
WORKSHOP EQUIPMENT RNB40 NUT & BLIND RIVETER SET 130 piece kit suitable for sheet aluminium, steel & stainless Includes: Aluminium rivet nut inserts: M5, M6, M8, M10 - (10 of each size) Blind aluminium
More informationFolding Center XL-Center
RAS Reinhardt Maschinenbau GmbH : Compact innovation! The is a folding innovation for light gauge sheet metal profiles used mainly in the roofing and architectural industry. With 3200 mm (126") of folding
More informationStraight and contra-angled handpieces
Microsaws The saws are provided with extra-thin blades which reduce bone loss to a minimum. The sagittal, osseoscalpel and oscillating saws are equipped with an irrigation tube integrated in the hand-grip.
More informationHF- GENERATORS.
HF- GENERATORS www.mgb-berlin.de 2 CONTENT n HF-4000 L Page 4-5 n HF-4000 B & HF-2000 B Page 6 n HF-1500 B & HF-800 B n Technics of HF-4000 B/HF-2000 B/ HF-1500 B/HF-800 B n Active monopolar electrodes,
More informationLooking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.
1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.
More informationTurnado 280. Turnado 280. Lead Screw and Feed Shaft Lathe. Including 3-axis position indicator.
Lead Screw and Feed Shaft Lathe Including 3-axis position indicator Center width up to 2928 mm Turning diam. over bed Removable bridge for machining of large diameters Stop spindle with four adjustable
More informationSynea Vision contra-angle and straight handpieces Dental handpieces with ceramic ball bearings (WK-99 / WK-93) and compact glass rod light
Restoration & Prosthetics Synea Vision turbine handpieces Dental turbines integral ceramic ball bearings and optimum cooling of 5-fold spray with Roto Quick connection with Multiflex connection TK-00 L
More informationPowered Instruments System Product Catalog. Hall LITHIUM BATTERIES M-CLASS BLADES HALL SMALL BONE HANDPIECE SURGAIRTOME TWO
Hall Powered Instruments System Product Catalog HALL MICROPOWER + HALL MICRO 100 SMALL BONE HANDPIECE SURGAIRTOME TWO M-CLASS BLADES HALL LITHIUM BATTERIES Contents Ordering Information...2 Product Support...3
More informationTENSILKUT ENGINEERING
TENSILKUT ENGINEERING For Accurate Test Specimens Manufacturer of equipment for the accurate preparation of physical test specimens since 1955 SIEBURG INTERNATIONAL, INC. 1901 Clydesdale Street, Maryville,
More informationChampion Instrumentation. Shoulder Repair Made Simpler
Champion Instrumentation Shoulder Repair Made Simpler Champion Instruments Simplicity & Versatility The Champion Shoulder instrumentation system was designed with simplicity in mind. Clever instruments
More informationPowered Instruments System Product Catalog
Powered Instruments System Product Catalog MicroPower Saw Micro100 Surgairtome M-CLASS BLADES Batteries Contents Ordering Information... 2 Product Support... 3 Product Support and Service Programs... 4
More informationBits for hand power tools
Bits for hand power tools Products Page Adaptors 232-233 nterchangeable boring bits 233 Boring bits 234~237 Mortise chisel & bit set 237 Plug cutters & ets 238-239 Forstner bits 240-241 Brad point bits
More informationNABTEB Past Questions and Answers - Uploaded online PAST QUESTIONS AND ANSWERS GENERAL METAL WORK MAY/JUNE 2009
PAST QUESTIONS AND ANSWERS GENERAL METAL WORK MAY/JUNE 2009 1a. Enumerate TWO safety measures each as regards the use of the following hand tools. 1. Scriber 2. Chisel 3. File 4. Try-square 1. Scriber:
More informationUniversal rotary hammer drill, 2,5 kg, SDS-plus. CHE 2-28 SDS-plus
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Universal rotary hammer drill, 2,5 kg, SDS-plus CHE 2-28 SDS-plus Order number 43.666 No load speed 0-300 rpm Blows per minute 0-4000
More information2018 PROXXON PRICE LIST Prices subject to change without notice. Prices effective July 1, 2018
THE GENERAL STORE N1246 Thrush Drive Greenville WI 54942 Phone: 920-757-1718 Fax: 920-757-0974 Email: Sales@ProxTools.com Website: www.proxtools.com 2018 PROXXON PRICE LIST Prices subject to change without
More informationProfiform 200 Profiform 320. Operating manual
Profiform 200 Profiform 320 Operating manual Profiform 200 / Profiform 320 Operating manual Page 1 Table of contents 1. General information Page 2 2. Profile of the Profiform sheet metal working machines
More informationCode Desc. Ø mm Ø hole mm. Code Desc. Ø mm Ø hole mm. With wire of corrugated steel. Suitable for removing rust, scale etc.. Employee of grinders.
Circular brush steel wire Corrugated steel wire high strength. Suitable for deburring, satin finishing and polishing, to remove rust and metal cleaning. Code Desc. Ø Ø hole Thickness 3002700 77-150x16
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationHeat Exchanger Coil: Build Instructions
Heat Exchanger Coil: Build Instructions Tank Assemblies Feed Tank (Drawing: WS-101) o Use a jig-saw to cut a large circle into the top of the barrel, 2-3 inches in from the edge o Leave the lip intact.
More informationinstallation guide 1 GUIDE#: pwb-assault-001
assault WAKEBOARD tower installation guide INSTALLATION SUPPORT 1 important information This Aerial wakeboard tower fits motor boats with 76-108 inch wide beam widths. This measurement is taken from the
More informationCARPENTRY & MEASURING TOOLS CATALOGUE
CARPENTRY & MEASURING TOOLS CATALOGUE 2 CARPENTRY TOOLS CARPENTRY TOOLS 3 SMC - 431 T - BAR CRAMPS Bar Manufactured From Special 'T' Bar Section Steel Head & Slide Made Of Cast Iron Suitable For Heavy
More informationTuck tie in shirt, roll up sleeves, wear protective apron or lab. coat. High risk
Risk Assessment Exercises The table below lists some typical D&T activities and the risks involved in carrying them out. Assess each activity as either a high risk, low risk or no risk activity and state
More informationHigh Speed Air Turbine Handpiece
OPERATION MANUAL High Speed Air Turbine Handpiece Please read this Operation Manual carefully before use and file for future reference. Handpiece should not be used with friction grip burs exceeding 18.5
More informationCredit Value 10 QCF Level 3 GLH 75. Learner pack
QETA/046 Advanced milling Credit Value 10 QCF Level 3 GLH 75 Unit purpose/aims Learner pack This unit enables you to acquire the skills and essential background knowledge relating to advanced milling techniques,
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More informationCHAPTER 23 Machining Processes Used to Produce Various Shapes Kalpakjian Schmid Manufacturing Engineering and Technology 2001 Prentice-Hall Page 23-1
CHAPTER 23 Machining Processes Used to Produce Various Shapes Manufacturing Engineering and Technology 2001 Prentice-Hall Page 23-1 Examples of Parts Produced Using the Machining Processes in the Chapter
More informationBurs make the difference! To be used where the surgeon requires high precision and safety!
Burs make the difference! To be used where the surgeon requires high precision and safety! When choosing rotary instruments, the following criteria are important: Sharpness Precision Safety Economical
More informationPRODUCT SPECIFICATION
PRODUCT SPECIFICATION Brand C.K Product Range Ecotronic ESD Pliers Catalogue number T3883, T3884, T3885, T3886, T3887, T3888, T3889, T3890, T3891, T3892, T3893, T3894, T3895 Date 20/03/2015 Range Description
More informationSAFE OPERATING PROCEDURE KEY CUTTING MACHINE - Manual (Generic)
SAFE OPERATING PROCEDURE KEY CUTTING MACHINE - Manual (Generic) DO NOT use this equipment unless you have been instructed in its safe use and operation and given prior permission. PERSONAL PROTECTIVE EQUIPMENT
More informationWorkshop Practice (ME192)
Workshop Practice (ME192) Credits: 3 Contacts: Mail: poddar05@gmail.com Web: http://www.ajourneywithtime.weebly.com Exp 03: To make a pin as given profile from a φ20 mm mild steel rod in a lathe. Material
More informationTrack laying. Education Program Basic Skills Series Module Five
Education Program Basic Skills Series Module Five Track laying The following pages introduce the essential elements of track laying Tools Fundamentals of track laying Sectional track Flexible track Point
More informationUW II F. SAACKE PRECISION in a compact design. Compact automation. Precision & stability. 8-Station wheel changer
UW II F GRINDING CENTER FOR ECONOMICAL GRINDING SAACKE PRECISION in a compact design Precision & stability with highest economic efficiency 8-Station wheel changer for higher flexibility and optimal cooling
More informationSport-Thieme. Handball Goal. Assembly instruction. 3x2 m, without net brackets, in ground sockets
Assembly instruction Cat.-no.: 113 6526 Sport-Thieme Handball Goal 3x2 m, without net brackets, in ground sockets Thanks for choosing Sport-Thieme equipment! In order to enjoy this product please note
More informationPSK Tool Holders. Chapter 2 of the Product Catalogue 2010/2011 Precision Tools
PSK Tool Holders Chapter 2 of the Product Catalogue 2010/2011 Precision Tools PSK - Polygonal Kelch GmbH Tel.: +49 (0) 71 51 / 2 05 22-0 Fax: +49 (0) 71 51 / 2 05 22-11 info@kelchgmbh.de www.kelchgmbh.de
More informationISO 9001.CE. MONASET Tool Grinder.
ISO 9001.CE MONASET Tool Grinder www.topwork.com.tw FEATURE CM-A & CM-2 sharpen and recondition complex tool shapes and parts. Turntable and guide bar allows workpieces grinding from different direction.
More informationstate of mind, state of the art
TOTAL SURGICAL SYSTEM state of mind, state of the art Powerful Partners Powerful Partners NSK Handpieces and The Human Hand Speed and torque properties are often considered the main criteria for judging
More informationformbore- System Tools a new development to inspire you both technically and economically
- System Tools a new development to inspire you both technically and economically Leitz Metalworking Technology Group The basic concept - simple but brilliant Design and mode of operation formbore system
More informationCATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS
CATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS FERM PROFESSIONAL TOUGH TOOLS FOR THE PROFESSIONAL FERM, founded in 1965, is one of the leading European power tool brands. Our headquarters is based in
More informationICFS ROTARY DRILL ISB 6 VR
ICFS ROTARY DRILL ISB 6 VR Chuck clamp range Weight ISB 6 VR 550 w 230 V 0-3000 RPM 0.6-06 mm 1.3 Kg Commodity - Impact drill Quantity- 1 Content- 1 N each of Rotary drill, Chuck key, Drilling range: Drilling
More informationCATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS
CATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS FERM PROFESSIONAL TOUGH TOOLS FOR THE PROFESSIONAL FERM, founded in 1965, is one of the leading European power tool brands. Our headquarters is based in
More informationPresentation by Bill Haskell (September 9, 2001)
P o w e r C a r v i n g Presentation by Bill Haskell (September 9, 2001) Power carving, as I define it, is the use of electric power tools in the process of removing material (usually wood) to create a
More informationCATALOG TOOL STEEL ELECTRIC
CATALOG TOOL STEEL ELECTRIC 1/26 BENDING MACHINES Biegeboy bending machine For bending panels with turned-up edges up to a turn-up height of 50mm. Very small radii are produced in several passes. 40 cm
More informationSport-Thieme. Handball Goal. Assembly instruction. 3x2 m, Free-standing with Fixed Net Brackets
Assembly instruction Sport-Thieme Handball Goal Cat.-no.: 115 0953 2392905 239 2918 113 6500 239 2400 239 2413 3x2 m, Free-standing with Fixed Net Brackets Thanks for choosing Sport-Thieme equipment! In
More informationCHISELS / PUNCHES. Innovation is our mission!
CHISELS / PUNCHES Innovation is our mission! 1 PAGE FLAT CHISELS 564 TILER S FLAT CHISELS 565 SLITTING CHISEL 565 JOINTING CHISELS 565 BRICKLAYERS CHISEL 566 POINTED CHISELS 566 ELECTRICIANS CHISEL 566-567
More informationKaVo INTRAmatic E. A perfect introduction to the world of KaVo.
KaVo INTRAmatic E A perfect introduction to the world of KaVo. 2 3 The perfect introduction. The "E" in the INTRAmatic E series could stand for a lot of things: Ergonomic, economic, effective, efficient,
More informationOperating Manual Riveting Tool R1. For installing blind rivet nuts
L Operating Manual Riveting Tool R1 For installing blind rivet nuts Table of contents 1. Introduction 1.1 General instructions... 2 1.2 Description of the riveting tool... 3 1.3 Safety instructions...
More informationCustomer Information: Primeway Inc 555 East Mandoline Ave Madison Heights, MI 48071
www.snxtechnologies.com Page 1 SNX / VITAP Eclipse Semi-Automatic Contour Edgebander (Laser & Heavy Duty Vacuum Arm) SNX Technologies is pleased to provide the following quote New Vitap Eclipse Contour
More informationTube Fabricating Equipment
Tube Fabricating Equipment Tube Cutters Tube Benders Flaring Tools Deburring Tool Tube Cutter Tube Benders TC-1000-BPD 1/8" - 1 1/8" 367-FH-BPD Lever Type TC-1050-BPD 1/8" - 5/8" p. M5 p. M5 p. M5 p.
More informationDrilling holes in thin sheetmetal
Drilling holes in thin sheetmetal Have you ever tried to drill holes in thin sheet metal, using standard drills, and ending up with a ragged triangular shaped hole, not anywhere near the diameter you wanted,
More informationV-Turn 410. V-Turn 410. CNC Precision Lathes. incl. 3-axis position indicator and integrated spindle speed indicator, completely assembled
CNC Precision Lathes incl. 3-axis position indicator and integrated spindle speed indicator, completely assembled center width 1000 / 1500 mm max. turning diameter over bed 410 mm infinitely variable spindle
More informationSafe Operating Procedure ELECTRIC DRILL
Safe Operating Procedure ELECTRIC DRILL DO NOT use this equipment unless you have been instructed in its safe use and operation and given prior permission. PERSONAL PROTECTIVE EQUIPMENT OPERATIONAL SAFETY
More informationMF 1 MF 1 V MF 1 MF 1 V. Multipurpose Milling Machines. Most widely used milling machine type word-wide!
Multipurpose Milling Machines Most widely used milling machine type word-wide! with 3 axes position indicator head swivels through 3 axes swivel r + l ± 90 ilt forward + reverse ± 45 rotation on the column
More informationMutronic DIAPART 71OO. Pre-scored Circuit. Board Separating Machines THE BEST ARATING PRINCIPLE SEPARA. For pre-scored circuit board!
DIAPART 71OO 72OO Pre-scored Mutronic Board Separating Machines THE BEST SEPARA ARATING PRINCIPLE For pre-scored circuit! Separating process without stress due to diamond disc! Components are no more damaged
More informationSPRING PROMOTIONS. ANNIVERSARY - 55 YEARS OF FELDER
SPRING PROMOTIONS 55 YEARS OF ANNIVERSARY - 55 YEARS OF GROUP ONTARIO 1745 Meyerside Drive, Unit 4 L5T 1C6 Mississauga, ON Tel. 1-866-922-8879 Fax 1-905-670-9162 MACHINERY IMPORTS MANITOBA FMI Headquarters
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 80 mm versatile for many applications for
More informationChapter 24 Machining Processes Used to Produce Various Shapes.
Chapter 24 Machining Processes Used to Produce Various Shapes. 24.1 Introduction In addition to parts with various external or internal round profiles, machining operations can produce many other parts
More informationWith a little time and effort, you can increase the performance of your engine by going from THIS.
How-To Modify The V6 & V8 Throttle Body This modifying procedure is for the 5.2 and 5.9 V8 and the 3.9 V6 TB''s. With a little time and effort, you can increase the performance of your engine by going
More informationLecture 15. Chapter 23 Machining Processes Used to Produce Round Shapes. Turning
Lecture 15 Chapter 23 Machining Processes Used to Produce Round Shapes Turning Turning part is rotating while it is being machined Typically performed on a lathe Turning produces straight, conical, curved,
More information