Straight and contra-angled handpieces

Straight and angled handpieces for surgery

Straight and angled handpieces for surgery Surgical instruments - technical characteristics PM RM 1122 / 1:1 ratio REF 1600206-001 REF 1600340-001 REF 1600341-001 PM AM 10121 / Reducing ratio of 10 REF

Optima MCX. Instructions for use. other languages available on Rx Only REF /

Optima MCX ENG Instructions for use other languages available on www.bienair.com/ifu Rx Only REF 2100289-0000/2015.02 Set Optima MCX REF 1700588-001 Options REF 1600959-001 (White) REF 1600751-001 REF

TORNADO. ENG Instructions for use. other languages available on REF /

TORNADO ENG Instructions for use other languages available on www.bienair.com/ifu 0120 REF 2100277-0000/2015.02 Set supplied (REF) 1600907-001 1600908-001 Optional accessories (REF) 1600243-001 1600242-001

POWER. Rethinking Possibilities, Reshaping Lives

POWER Rethinking Possibilities, Reshaping Lives General Information Territory Manager Information OsteoPower System Introduction Power Control Consoles & Footswitches Modular Motor Units Drill Modules

Small Bone Power System

236041 Zimmer B 7/10/06 3:14 PM Page 1 Manufactured by: Distributed by: 236041 Zimmer B 7/10/06 3:14 PM Page 2 236041 Zimmer B 7/10/06 3:14 PM Page 3 Contents Introduction 2 High Speed Drill 3 Medium Speed

POWER. Rethinking Possibilities, Reshaping Lives

POWER Rethinking Possibilities, Reshaping Lives Territory Manager Information OsteoPower System Introduction Power Control Consoles & Footswitches Modular Motor Units Drill Modules Wire/Pin Driver Modules

Aesculap Power Systems HiLAN XS

Aesculap Power Systems HiLAN XS Pneumatic High Speed Power System HiLAN XS size redefined HiLAN XS Micro design perfection in every detail Revolutions start with small things. The extremely small HiLAN

KaVo INTRAmatic E. A perfect introduction to the world of KaVo.

KaVo INTRAmatic E A perfect introduction to the world of KaVo. 2 3 The perfect introduction. The "E" in the INTRAmatic E series could stand for a lot of things: Ergonomic, economic, effective, efficient,

powerful, smart & reliable

HIGH PERFORMANCE BRUSHLESS MICROMOTOR WITH PRECISE TORQUE CONTROL powerful, smart & reliable Powerful Partners PRM014E Ver.2 10.04.02.A Contents NSK COMPANY INTRODUCTION P2 3 PRODUCT LINE UP P4 5 CONTROL

KaVo INTRAcompact. KaVo's got the answer.

KaVo INTRAcompact KaVo's got the answer. 2 3 Once a KaVo customer, always a KaVo customer. KaVo technology at its best; feel it. Every INTRAcompact instrument benefits from world renowned KaVo product

Synea Vision contra-angle and straight handpieces Dental handpieces with ceramic ball bearings (WK-99 / WK-93) and compact glass rod light

Restoration & Prosthetics Synea Vision turbine handpieces Dental turbines integral ceramic ball bearings and optimum cooling of 5-fold spray with Roto Quick connection with Multiflex connection TK-00 L

Total Performance System THE ESSENCE OF POWER AND VERSATILITY IN A UNIVERSAL SURGICAL SYSTEM NEURO SPINE ENT SPORTS MED PLASTICS GEN.

NEURO SPINE ENT SPORTS MED PLASTICS GEN. ORTHOPEDICS ORAL/MAX Total Performance System THE ESSENCE OF POWER AND VERSATILITY IN A UNIVERSAL SURGICAL SYSTEM Attachments INNOVATION WITH ATTITUDE Burs UNIVERSAL

MicroSurgical Power Tools

MicroSurgical Power Tools C.O.R.E Consolidated Operating Room Equipment Power Simplicity Versatility Customized Performance Standardization MicroSurgical Power Tools Consolidated Operating Room Equipment

microspeed uni Aesculap Get the speed you need Aesculap Power Systems

Aesculap Get the speed you need microspeed uni Aesculap Power Systems Relax the power is in your hand. Ergonomic, lightweight and quiet - exceptional! With a weight of under g and an out stan ding design,

SpeedSurg. HighSpeed Micro Drill System

HighSpeed Micro Drill System 2 HighSpeed Micro Drill System The new HighSpeed drill system from Spiggle & Theis for maximum precision and versatility in ENT surgery for your clinic. With its unique safety

Interproximal Reduction and Separation

Interproximal Reduction and Separation Our Strength is our Service Ortho-Care (UK) Ltd. Facsimile: 01274 734446. Website: www.orthocare.co.uk. Email: info@orthocare.co.uk 17 AIR ROTOR STRIPPING - Adult

OPERATOR S MANUAL OSADA EXL-M40 OSADA EXL OSI-2 OSADA, INC.

OPERATOR S MANUAL OSADA EXL-M40 OSADA EXL OSI-2 NEW Electric BRUSHLESS Laboratory MICROMOTOR Handpiece System SYSTEM FOR ORAL with SURGERY BRUSHLESS AND IMPLANT MICROMOTOR PREPARATIONS OSADA, INC. 30008436

ISO Dentistry Handpieces and motors. Médecine bucco-dentaire Pièces à main et moteurs. First edition

INTERNATIONAL STANDARD ISO 14457 First edition 2012-09-15 Dentistry Handpieces and motors Médecine bucco-dentaire Pièces à main et moteurs Reference number ISO 2012 Provläsningsexemplar / Preview COPYRIGHT

Primado2 Product Lineup

PR-M033E Ver.1 12.04.015.A Primado2 Product Lineup Slim Motor Series Micro Bone Saw Series High Torque Motor Series Primado2 Slim Motor P12 Primado2 Micro Bone Saw P32-34 Primado2 High Torque Motor P20

with touch screen EXCERPT FROM CATALOG ENT UNIDRIVE S III ENT SCB

with touch screen EXCERPT FROM CATALOG ENT UNIDRIVE S III ENT SCB All pictures, photos and product descriptions are the intellectual property of KARL STORZ & Co. KG. Utilisation and copies by third parties

H.P. BRAEM AG. Ophthaltech Switzerland. Precision is our passion

H.P. BRAEM AG Ophthaltech Switzerland Precision is our passion PRODUCT CATALOG 2017 2 This brochure gives you an introduction in the present product range of H.P. BRAEM AG. Please be aware that products

solid titanium handpieces

Ti-MAX Ti SERIES FROM NSK OPTIC & NON-OPTIC LOW SPEED HANDPIECES SOLID TITANIUM solid titanium handpieces SLIM LINE Smart design Smallest head & Ultra Slim neck Excellent operator dexterity Evolution of

state of mind, state of the art

TOTAL SURGICAL SYSTEM state of mind, state of the art Powerful Partners Powerful Partners NSK Handpieces and The Human Hand Speed and torque properties are often considered the main criteria for judging

S TRUMENT AL INS DENT

DENTAL INSTRUMENTS Put your trust in tradition... since 1935 Our history Chronology of turbines production...up to 1991 production of turbines with plastic spindle and with body made from brass, screw

Aesculap Power Systems microspeed uni. Get the speed you need

Aesculap Power Systems microspeed uni Get the speed you need Get the speed you need. Small - powerful - inspiring This completely innovative high speed motor from Aesculap sets a new milestone in small

Surgical Handpiece. Ti-Max Ti-Max Ti-Max Ti-Max X-SG20L X-SG25L X-SG93L X-SG93. S-Max SG M OM-C0425E

Surgical Handpiece Ti-Max Ti-Max Ti-Max Ti-Max X-SG20L X-SG25L X-SG93L X-SG93 S-Max SG20 09.03.01 M OM-C0425E 001 for X-SG20L,SG20 This handpiece is used only for the Surgical Unit with Torque Calibration

Interproximal Reduction

Interproximal Reduction 10.0 mm 10.0 mm 1.0 mm 0.39 mm Fine Grit Long Item #: 8859-31-010 1.0 mm 0.45 mm Medium Grit Long (Blue Color ID) Item #: 859-31-010 1 pack... $ 46.95/pk 3 or more... $ 44.95/pk

Aesculap ELAN 4. Surgeon`s Darlings for Precision, Performance and Pleasure.

Surgeon`s Darlings for Precision, Performance and Pleasure. Surgeon s Darlings for Precision and Performance Engineered in Germany. As a surgeon, I need to do the best job possible in order to maintain

REFINED COMFORTABLE DURABLE 2018 / 01. BDC Dental Corporation Ltd.

REFINED COMFORTABLE DURABLE 2018 / 01 BDC Dental Corporation Ltd. BDC Dental Corporation Ltd. BDC is strategically located in Guangzhou with a 120,000 square feet modern manufacturing facility and is devoted

HIP instrument Disassembly and Specific Cleaning Manual

HIP instrument Disassembly and Specific Manual Content Clinical Graphical Symbols..I Broach Handle 904-603-RA Cup Impactor, Offset. 906-05. Cup Locator Block.....3 903-0......3 Cup Reamer Handle, Straight,

KEY SURGICAL WIRE AND PIN MANAGEMENT

KEY SURGICAL WIRE AND PIN MANAGEMENT We offer the highest quality and the broadest selection of wires and pins for a variety of procedures as well as dispensers, sterilization racks, pin covers, cutters,

Dentistry Handpieces and motors

Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 14457 Second edition 2017-10 Dentistry Handpieces and motors Médecine bucco-dentaire Pièces à main et moteurs Reference number ISO 2017 Provläsningsexemplar

Cutting Accessories Micro Burs

Cutting Accessories Micro Burs CORE Micro Drill 5400-15 CORE Micro Drill Micro Drill Attachments 5100-15-250 MD Series Straight Attachment 5100-15-270 MD Series Long Straight Attachment 5100-15-252 MD

Shaver System EBERLE C2

Shaver System C2 Shaver System EBERLE C2 y n a m r e G n i M ade Control Unit Hand Piece Foot Switch Universal Motor Hand Piece Shaver System 913000 Control Unit 913001 Foot Switch 913003-2 Control Unit

FFERS. July - SEPTEMBER kentexpress.co.uk 3 FOR ONLY 599. BA525 Quick Connect Turbines for most fittings.

0800 028 1181 kentexpress.co.uk July - SEPTEMBER 2018 BA525 Quick Connect Turbines for most fittings 3 FOR ONLY 599 See inside FFERS Expert advice and supreme value for 35 years TRUSTED VALUE THE OPTIMA

A Revolution in Information Management

Conforms to SEMI Standards Upgraded with New Functions Suitable for Reading Dot Cell Codes A Revolution in Information Management Actual size Industry's smallest head (without lens) V530-R150E-2, V530-R150EP-2

Robust. Powerful. Efficient.

Robust. Powerful. Efficient. KaVo EXPERTtorque KaVo EXPERTmatic KaVo EXPERTtorque E680 L KaVo EXPERTtorque Mini E677 L KaVo EXPERTmatic E25 L KaVo EXPERTmatic E20 L KaVo EXPERTmatic E15 L KaVo EXPERTmatic

TABLE OF CONTENTS TABLE OF CONTENTS...1 INTRODUCTION...2 TECHNICAL DATA...3 POLISHER INSTALLATION...4 SAFETY AND OPERATIONAL INFORMATION...

Rev. 8 March 2005 SUBJECT TABLE OF CONTENTS PAGE TABLE OF CONTENTS...1 INTRODUCTION...2 TECHNICAL DATA...3 POLISHER INSTALLATION...4 SAFETY AND OPERATIONAL INFORMATION...5 POLISHER OPERATION...6 MICROMOTOR

ISO INTERNATIONAL STANDARD. Dentistry Rotary bur instruments Part 2: Finishing burs

INTERNATIONAL STANDARD ISO 3823-2 Second edition 2003-05-15 Dentistry Rotary bur instruments Part 2: Finishing burs Art dentaire Instruments rotatifs de fraisage Partie 2: Fraises à finir Reference number

STATIS and SANAO. Quality and Precision Handpieces

STATIS and SANAO Quality and Precision Handpieces Quality and Precision 1 you can Trust SciCan strives to make your dental procedures easier by providing reliable handpieces with superior design and quality

High Speed Air Turbine Handpiece

OPERATION MANUAL High Speed Air Turbine Handpiece Please read this Operation Manual carefully before use and file for future reference. Handpiece should not be used with friction grip burs exceeding 18.5

STATIS and SANAO. Quality and Precision Handpieces

STATIS and SANAO Quality and Precision Handpieces Quality and Precision 1 you can Trust SciCan strives to make your dental procedures easier by providing reliable handpieces with superior design and quality

i'"fi fiil S"'sii"l... Micro 700'* Surgery System, Tl;.e Advanced, reliable instruments for precision small-bone surgery.

Micro 700'* Surgery System, Tl;.e i'"fi fiil S"'sii"l... Advanced, reliable instruments for precision small-bone surgery. Lightweight and perfectly balanced, each Micro 100 ' handpiece gives you better

WRIST ARTHROSCOPY SYSTEM

DESCRIPTION 1 1 lot 10,648,751.67 Brand new, not reconditioned including its Parts & Accessories 1. Wrist Arthroscope a. HD wide angle 30-degree small joint arthroscope i. One (1) short scope (1 piece)

MIG/MAG Welding Torch System ROBO WH 455 D ROBO WHPP 455 D liquid cooled

MIG/MAG Welding Torch System ROBO WH 455 D ROBO WHPP 455 D liquid cooled C E R T I F DIN EN ISO 9001 Q M - S I Y E T S D E M BINZEL. The right welding torch for every job. The welding torches belonging

PSK Tool Holders. Chapter 2 of the Product Catalogue 2010/2011 Precision Tools

PSK Tool Holders Chapter 2 of the Product Catalogue 2010/2011 Precision Tools PSK - Polygonal Kelch GmbH Tel.: +49 (0) 71 51 / 2 05 22-0 Fax: +49 (0) 71 51 / 2 05 22-11 info@kelchgmbh.de www.kelchgmbh.de

Polished head, handles black atramentised. Polished head, dip-coated handles. Length mm

575-576 Steel C 45, oil-hardened and tempered, Pincers (cutting pliers) DIN/ISO 9243 575 Polished head, handles black atramentised. 576 Polished head, dip-coated handles. 575 576 Length 575 576 16 11 18

Examination light with LED technology CHROMOPHARE F 300

Examination light with LED technology CHROMOPHARE F 300 Light at the right time, in the right place For treatment and examination, the CHROMOPHARE F 300 provides an allround solution for all emergency

Diamond-Tip Rasps. Features and Benefits. Patented tungsten carbide insert for increased wear resistance and durability.

Rasps Rasps feature a patented tungsten carbide cutting surface.the major advantages of these rasps over conventional models are their superior cutting ability, increased longevity and clean, precise cut.

PROPHYMAGIC.COM. King. Prophy. Top Rated Products at the BEST Prices! The. Mystic Angle. KIDDOZ Angles. Magic Air Handpieces.

The King of Prophy PROPHYMAGIC.COM prophy angles Comfort Contra KIDDOZ Angles Magic Air Handpieces Mystic Angle Magic Syringe Tips Freestyle Top Rated Products at the BEST Prices! Directory 4 5 6 7 8 9

Blower Cutter Jig Saw Circular Saw Circular Saw Drill High Speed Drill High Speed Drill Mixer Hammer Drill Hammer Drill Demolition Hammer

Index M00 M00 M0801K M0901 M0920 M0921 M1902 M2300 M2401Z M3600 M3601 M3700 Cutter Drill Power Planer Compound Miter Saw Portable Cut-off Router Router (Plunge type) Trimmer 08 08 M4000 M4101 M4301 M5801

<TITLE HERE> Irrigation/Aspiration Handpieces

Irrigation/Aspiration Handpieces Bi-Manual Handpieces Aspirating Handpieces Consistent high flow rates, even at 20 gauge, is achieved by our precise method of manufacturing. Aspiration hand

Restoration & Prosthetics

Restoration & Prosthetics High Speed Handpieces LED Couplings Low Speed Handpieces Clinical Micromotors Others PR-D718A Ver.2 12.00.00.0 Ti-Max X Series >>> P. 3-4 LED Couplings >>> P. 13 Ti-Max Z Series

Stainless Steel Rotary Indexing Tables and A-Axes for Wire and Sinking EDM. Catalogue RE 4905

Stainless Steel Rotary Indexing Tables and A-Axes for Wire and Sinking EDM Catalogue RE 4905 Rotary Indexing Tables and A-Axes by HIRSCHMANN Pin point accuracy Controlled dynamic power Consistent performance.

EN your reliable connection. Special blind rivet nuts

EN 9100 Tubtara your reliable connection Special blind rivet nuts Geometry and mechanical values Dejond is manufacturing a wide range of blind rivet nuts with trademark TUBTARA. The standard programme

Omega Surgical Contact Info. Table of Contents. Introduction 1.0. Omega Signature Series Burs 1.1. Omega UltraLite Burs 2.1

Surgical Contact Info Table of Contents Section Page Introduction 1.0 TM Signature Series Burs 1.1 UltraLite Burs 2.1 DiaMax Oscillating s 3.1 Medtronic Xomed Replacement Burs 4.1 Linvatec /Zimmer Replacement

Summary. About us. C 1 metal refill. B 3 plastic refill with plastic adapter. G 2 Jumbo refill, Oil Based. Capillary refill - Japan style

Worth is inside. Summary 5 6 8 10 12 14 16 18 20 23 About us Roller refill Gel refill G 2 Jumbo refill, Gel G 2 Jumbo refill, Oil Based C 1 metal refill Capillary refill - Japan style D 1 Mini refill

Midwest Products Retail Price List. Effective October 1, 2017

Midwest Products Retail Price List 2018 Effective October 1, 2017 Midwest Products 2018 Retail Price List Pricing Effective October 1, 2018 Contact information for Midwest products: CUSTOMER SERVICE: 800-800-2888

Options Markers Pneumatic marking For punching and engraving plates. The depth of marking is controlled by varying the compressed air pressure and the speed. Recommended for use on plates thicker than

PRODUCT MANUAL. Flush Mount 1 mm Cavity TS FM01 K. Training and Technology for Injection Molding. Temperature Sensor

PRODUCT MANUAL Flush Mount 1 mm Cavity Temperature Sensor TS FM01 K Training and Technology for Injection Molding PRINT DATE 08.02.2018 REVISION NO. 0 PRODUCT MANUAL Flush Mount 1 mm Cavity Temperature

User manual. Handpieces. Micro-Suction. Suction-Pen. Usable with Sonoca 300/Sonoca 400 Required Softwareversion: Dok-ID: _R05

Micro-Suction Suction-Pen Pen-Hand Handpieces 92-020, 92-021, 92-112 0123 Dok-ID: 03-2002_R05 01/2010 Usable with Sonoca 300/Sonoca 400 Required Softwareversion: 4.53 Contents Function Description....1

B223E DLE MULTI-FUNCTIONAL SPOT DRILL FOR CENTERING AND CHAMFERING

MULTI-FUNCTIONAL SPOT DRILL FOR CENTERING AND CHAMFERING 2018.10 B223E MULTI-FUNCTIONAL - FOR CENTERING AND CHAMFERING Centering Hole Chamfering Edge Chamfering V-grooving FEATURES THINNED POINT GEOMETRY

microspeed uni Aesculap Get the speed you need Aesculap Power Systems

Aesculap Get the speed you need microspeed uni Aesculap Power Systems Get the speed you need. Small - powerful - inspiring This completely innovative high speed motor from Aesculap sets a new milestone

Powered cutting equipment. Straight Handpiece Contra-angle Handpiece Air Turbine Handpiece

Lec.3 أ.م. مثنى شعبان رجب Powered cutting equipment Handpiece: Is a device for holding rotary instruments, transmitting power (Source of power is motor or air) to them, and for positioning them intraorally.

The new generation end mill series. Ideal for efficient and economical machining of general milling applications.

New vibration control solid carbide end mill series SHV, MHV TAR vibration control end mill series The new generation end mill series. Ideal for efficient and economical machining of general milling applications.

UNIDRIVE S III ARTHRO

ART 46-2 07/2013-E UNIDRIVE S III ARTHRO Your Complete Solution Arthroscopy UNIDRIVE S III ARTHRO Your Complete Solution Arthroscopy Whether the application is knee, shoulder, hip or a small joint, the

Self Feeder. Soldering-Related Equipment and Materials. V-Groove Maker. Features. Packing List. Specifications. Option

Self Feeder V-Groove Maker Features Minimize solder and flux splash Cutting a V-groove on the solder surface enables the release of gas pressure generated by the flux, thereby suppressing splash. HAKKO

PUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING

PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight

that allows to use diamond tools mounted on an ISO 40 cone with pneumatic release;

NOAT srl - via Marche, 12 36015 Schio (VI) Italy Tel. ++39 0445 575933 Fax ++39 0445 576058 - P.O. Box 142 e-mail : info@noat.it - URL : www.noat.it : Description The CNC cutting and profiling center mod.

Circular Saw Machines

AMADA MACHINE TOOLS EUROPE Circular Saw Machines CMB circular saw machine series for bar material CMB-75/100/150 CNC Circular saw machine series for the use of carbide tools The optimum solution for the

CENTRIFUGAL PUMPS FPE Series

OPERATING MANUAL CENTRIFUGAL PUMPS FPE Series Model : Model No.: Table of Contents Page 1. Maintenance 1 1.1. Disassembly 1 1.1.1. General 1 1.1.2. Impeller 1 1.1.3. Complete disassembly 1 1.2. Assembly

CO 2 Laser. AcuPulse. with SurgiTouch. Automation System. An Evolution in Automated Laser Surgery. Surgical: AcuPulse CO 2 Laser

AcuPulse CO 2 Laser with SurgiTouch Automation System An Evolution in Automated Laser Surgery www.lumenis.com www.surgical.lumenis.com SurgiTouch Automation System Automated and Robotic Laser Surgery The

Rumex International Co. Vitreoretinal Instruments + Consumables

Rumex International Co. Vitreoretinal Instruments + Consumables Rumex International Company 13770 58th Street North, Suite 317 Clearwater, FL 33760, USA shop@rumex.net Universal Handles for Vitreoretinal

Burs make the difference! To be used where the surgeon requires high precision and safety!

Burs make the difference! To be used where the surgeon requires high precision and safety! When choosing rotary instruments, the following criteria are important: Sharpness Precision Safety Economical

2-channel speed sensor GEL 247 Compact sensor for harsh applications

2-channel speed sensor GEL 247 Compact sensor for harsh applications Technical information Version 01.11 General Speed sensor based on magnetic measurement principle Maintenance- and wear-free operation

ALSATOM SU MPC SU 50 MPC SU 100 MPC SU 140 MPC SU 140/D MPC SU 140/BD MPC

ALSATOM SU MPC SU 50 MPC SU 100 MPC SU 140 MPC SU 140/D MPC SU 140/BD MPC ELECTROSURGICAL UNITS FOR MONOPOLAR AND BIPOLAR SURGERY CE 0051 The ALSATOM MPC system are a new generation of electrosurgical

HIGH PRECISION EXTRUSION TOOLING

E-XHEAD sw iss m a d e extrusion x-head for the cable and plastics industry R E-XHEAD GmbH - CH-1305 Penthalaz - Tel. +41 21 862 13 16 - Fax +41 21 862 13 17 HIGH PRECISION EXTRUSION TOOLING E-XHEAD PRECISION

New Uretero-Renoscopes from R. WOLF

Urology New Uretero-Renoscopes from R. WOLF Even less traumatic Higher image resolution Even brighter, even larger and even me brilliant image Smaller outer diameter Maximum stability Even longer wking

Implant & Surgial Handpieces

Implant & Surgial Handpieces Solid Titanium Body Cellular Glass Optics Optic Model X-SG20L ORDER CODE C1003 20:1 Reduction Titanium Body with Scratch Resistant DURACOAT Cellular Glass Optics Push Button

Indexable insert tools

New products Workshop equipment II / 2016 Order now from our online shop! www.meusburger.com Indexable insert tools Profit from our perfectly coordinated range of tool carriers and indexable inserts for

$ incl. Ø 12 5/8 /84T HM saw blade and 4 ft 7 guiderail $ Filip De Vis Cell: Tel:

The first metal circular saw with 4 3/4 cutting depth (on guiderail) $ 999.00 incl. Ø 12 5/8 /84T HM saw blade and 4 ft 7 guiderail Ref. 608270USET $ 899.00 incl. Ø 12 5/8 /84T HM saw blade Ref. 608270US

Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.

1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.

Instruments and Equipment for Knee Arthroscopy KNEE

Instruments and Equipment for Knee Arthroscopy KNEE Sheath System rthflow Sheath System All RZ ArthFLOW Arthroscope sheaths feature: 360 rotating stopcocks easy handling of suction/irrigation tubes Complete

Micro Surgery Speciality Instrumentation

Micro Surgery Speciality Instrumentation Exclusive Distribution by: Introduction Precision Surgical Ltd. is a supplier and manufacturer of high quality surgical instruments. All our instruments are sourced

Connect 2 Expertise Reliability Innovation

Connect Safe, lightweight, reliable Plastic connectors and cable assemblies www.fischerconnectors.com Dimensions Configurations FISCHER CONNECTORS Fischer Connectors is a leading company in the design,

ORTHOPEDICS Extracapsular Repair

ORTHOPEDICS Extracapsular Repair Monofilament Nylon Suture Veterinary Instrumentation Nylon Suture Packs are supplied sterile, unless otherwise noted. Weight Kgs (lbs.)* Strength of Nylon Nylon Line Monofilament

T i t a n i u m I n s t r u m e n t s

TITANIUM INSTRUMENTS T i t a n i u m I n s t r u m e n t s Titanium is a rare, lustrous metallic element which in its natural form is found in combination with other elements. The complex process of converting

Temposonics. Magnetostrictive Linear Position Sensors. GB-M / GB-T Analog Data Sheet

Temposonics Magnetostrictive Linear Position Sensors GB-M / GB-T Analog Sensor element and electronics can be changed Flat & compact sensor electronics housing Electrical connection is freely rotatable

K nk Valve 10 Year Limited Warranty

E L E V A N C E D E L I V E R Y S Y S T E M T E C H N O L O G Y The intuitive user interface is designed to allow you to control all instruments from one easily accessible location. The easy-to-read LED

Algeos US. Footcare Technology Solutions. clinic furniture l equipment l instruments

Algeos US Footcare Technology Solutions clinic furniture l equipment l instruments Clinic Furniture Nova Eden Podiatry Chair Multi-functional, versatile chair designed with both the patient and practitioner

Operating instruction for the quick-change tap holders type:

type: KSN 0 KSN 1 KSN 3 KSN 4 KSN 5 Date of edition: 01.02.2008 Stage of alteration: 1 Please keep this for future use! Contents: 1 Application range, safety instructions and technical data... 3 1.1 Application

CMF Surgery. Angulus2. Angled Screwdriver. ref

CMF Surgery Angulus2 Angled Screwdriver ref. 90-126-02-04 It s the head that counts and the face. There is nothing with which we identify ourselves more than with the face. We are how we see ourselves.

90 SCREWDRIVER Minimally invasive drilling and screw insertion

90 SCREWDRIVER Minimally invasive drilling and screw insertion This publication is not intended for distribution in the USA. SURGICAL TECHNIQUE This description alone does not provide sufficient background

Dental Sutures. Japanese quality for best results.

Dental Sutures Japanese quality for best results. / Standard stainless steel vs. MANI hard-fiber stainless steel 1 mm MANI hard-fiber stainless steel The original fine technology of processing offers you

Instruction manual SUN-PM100L. SUN-PM100L Polishing Machine English

Instruction manual SUN-PM100L SUN-PM100L Polishing Machine English Table: SUN-UM-TL-PM001 Version: A/0 Fiber Optic Solutions Provider Ⅰ Safety Precautions To ensure safe operation and maximize product

Specifications are subject to change without notice. PR-D664E Ver

Specifications are subject to change without notice. PR-D664E Ver.1 11.03.00.0 Impossibly Durable Quality & Performance Evolves The Next Phase Begins NSK next generation micro production technology, plus

SAW ARBORS B MADE IN THE * * * * * * * USA USA * * * * * * * A B C D E SSA-500

SAW ARBORS B SIDE MILLING SAW ARBORS With Quad Key Drive Assist FEATURES: The only SEMI-FLUSH keyed (removable) arbor for cutter with or without a drive key.0004 TIR Made from domestic 4340 aircraft alloy

<TITLE HERE> Irrigation/Aspiration Handpieces

Irrigation/Aspiration Handpieces Bi-Manual Handpieces Aspiration Handpieces Consistent high flow rates, even at 20 gauge, is achieved by our precise method of manufacturing. Aspiration hand

Flexibility and efficiency on high accuracy machining

Permanent-electro magnetic systems for turning and vertical grinding Flexibility and efficiency on high accuracy machining No piece distortion or deformation Uniform clamping: minimized vibrations Complete

RHODIUM-PLATINUM DENTAL DIAMOND BURS

DENTAL DIAMOND BURS RHODIUM-PLATINUM DELTADENT snc Via Cavour, 42-20865 Usmate (MB) Tel +39 039 6829298 - Fax +39 039 6076721 www.deltadent.it - info@deltadent.it BALL SHAPES S1-S1A Spherical burs for