LASER PROCESSING GLASS AND OTHER TRANSPARENT & BRITTLE MATERIALS W E T H I N K L A S E R
|
|
- Robert Little
- 6 years ago
- Views:
Transcription
1 LASER PROCESSING GLASS AND OTHER TRANSPARENT & BRITTLE MATERIALS
2 LASER PROCESSING OF GLASS AND OTHER TRANSPARENT & BRITTLE MATERIALS Laser processing of glass and other transparent brittle materials provides unmatched advantages compared to conventional production methods. Laser processing of glass is contact-free as the laser is a tool that doesn t wear out. COHERENT I ROFIN provides laser sources and complete system solutions as well as processes tailor-made to the customer s needs. Customers benefit from COHERENT I ROFIN s broad application know-how to find the right solution for their specific needs. SmartCleave TM - IP protected laser cutting process The COHERENT I ROFIN SmartCleave TM process utilizes ultrashort-pulsed lasers with dedicated properties, e.g. the Burst Mode. The basic invention is a patented process using laser filamentation to separate brittle and transparent materials in a high-speed, quasi debris-free and zero-gap process and nearly no post-processing. The patent portfolio is expanded continuously by COHERENT I ROFIN. Automotive Display Cutting and drilling of various components Handheld Devices Filamentation cutting and drilling Displays Combination of filamentation and drilling Touch Display Cutting of complex contours Superior Technology Kerfless separation process Cutting speed up to 2 m/s Glass thickness range 50 μm to 12 mm Suitable for glass, sapphire, crystals, ceramics etc. Cutting of chemically and thermally strengthened glass Cutting of complex geometries Cutting stacks of brittle material Unmatched Quality No micro-cracking and minimal chipping High bend strength Surface roughness Ra < 1 μm Quasi debris-free Coated Optics Cutting of optical elements with ablated chamfer Rearview Mirror High speed and quality cutting of automotive mirrors Glass Spacers For electronics production Optical Devices E.g. cutting of camera lenses, filters, etc. Compelling Economics Low cost of ownership Dramatic reduction of process steps Green technology without water use Sapphire Filamentation Wall roughness less than Ra < 0.2 µm Cutting Optics High speed processing of glass Micro Via Drill hole arrays for micro electronics Thick Glass 10 mm thick soda-lime glass
3 LASER PROCESSING OF GLASS AND OTHER TRANSPARENT & BRITTLE MATERIALS COHERENT I ROFIN not only offers a revolutionary glass cutting proces with SmartCleave TM, but also solutions for a wide range of other applications. Drilling/Cutting High aspect ratio (> 1:20) drilling Good quality cutting of complex shapes/geometries Micro holes (< 200 µm diameter) Low risk of micro cracks/chipping /Inside marking Powerful software allows easy and flexible decoration (text, DMC, bitmaps etc.) Smallest spot diameters for almost invisible markings for e.g. traceability Inside glass marking (no contamination) without surface damage High contrast surface marking on various materials Excellent marking speeds Inside Glass With picosecond laser, and without micro-cracks Ampule for machine readable track and traceability High Resolution For esthetic decoration Thin Film Ablation and Scribing For finest micro structures Decoating/Thin film ablation Perfect thin film removal with excellent ablation rates Superior beam quality equals highly sophisticated microstructures LIFT-process Nano layers with optical effects (e.g. color changes) can be transferred, forgery-proof Wide range of colors, selectable Functional layers possible Base material properties remain unchanged Micro Holes Drilling of < 200 µm diameter Holes Drilling with a high aspect ratio Ablation and Cleaning Selective surface processing for functional needs Exterior Rearview Mirror Selective ablation for light transmission e.g. automotive assist systems, day & night, etc. LIFT Process Transfer of nano layers for function and decorative purposes 3D-Design For challenging part surface geometries Sapphire Drilling High precision drilling, e.g. watch parts Sapphire Cutting Economic fusion cutting for high volume production
4 GLASS AND BRITTLE MATERIALS APPLICATIONS AND SYSTEMS SOLUTIONS COHERENT I ROFIN Laser Type Process HyperRapid NX Monaco PowerLine Pico PowerLine E UV StarFiber P DQ Laser PowerLine L StarShape SmartCleave TM Cutting x (version SmartCleave TM ) x Fusion Cutting x x Drilling x x x x x x x x x x Engraving x x x x Welding x x x Thinfilm Ablation x x x x x x LIFT Process x x Waveguide Writing x Edge Deletion x x x CombiLine Spacious working chamber with observation window Programmable z-axis Smart operation technology Space-saving design Selectable lasers Low investment costs MPS Flexible Welded steel construction base frame Granite base for the motion modules Precision and High Precision Modular design Laser garage for 19 laser source or laser supply cabinet Large working chamber Pneumatic sliding door CNC controller (Beckhoff) MPS Advanced Welded steel construction base frame Granite based motion modules Modular design Laser garage for 19 laser source or laser supply cabinet Spacious working chamber CNC controller (Beckhoff) Pneumatic sliding door Option manual sliding door (e.g. for crane loading)
5 ROFIN-BAASEL Lasertech GmbH & Co. KG Zeppelinstraße Gilching Phone Fax: ROFIN-SINAR Laser GmbH Berzeliusstraße Hamburg Phone Fax: sales-macro@rofin.de ROFIN-SINAR Laser GmbH Dieselstraße Bergkirchen-Günding Phone Fax: sales-marking@rofin.de مو ن و ى 属 مه فوك كميق م ف ف فل ء. م م ى فكىنىكم فكى وكم لم ىف مل ل ف ى لم كم مس/ة دز/ ٢.٠ ض/ ٠٦.١٧/ /٠.٥ /سسءجا/خةءدز-شخ ز بد ع Benelux: Phone info@rofin-baasel.nl CA: Phone info-canada@rofin-inc.com CH: Phone info@rofin-baasel.ch CN: Phone info@rofin-baasel.com.cn ES/PT: Phone info@rofin-es.com F: Phone info@rofin.fr IN: Phone sales.micro@rofin.in IT: Phone info@rofin.it JP: Phone info@rofin-baasel.co.jp KR: Phone info@rofin.co.kr SG: Phone reception@rofin-baasel.com.sg TW: Phone sales@rofin-baasel.com.tw UK: Phone sales@rofin-baasel.co.uk US: Phone info@rofin-inc.com Find further representatives and partners on
SHORT-PULSE LASERS PowerLine Pico Series for Marking and Micro Processing
Superior Reliability And Performance SHORT-PULSE LASERS PowerLine Pico Series for Marking and Micro Processing Short-pulse lasers from ROFIN offer high pulse peak power. This improves the quality of material
More informationTHE FUTURE OF PACKAGING LASER SOLUTIONS FOR THE PACKAGING INDUSTRY WE THINK L ASER
THE FUTURE OF PACKAGING LASER SOLUTIONS FOR THE PACKAGING INDUSTRY WE THINK L ASER CONVENIENT EASY STARPACK CW STARPACK WD STARPACK AP TREND - EASY-TO-OPEN AND RECLOSE PRACTICAL THE INNOVATION: LASER STARPACK
More informationNew Lasers Improve Glass Cutting Methods
New Lasers Improve Glass Cutting Methods Over the past decade, glass has become an increasingly sophisticated structural and functional component in uses as varied as flat panel displays (FPDs), automobiles
More informationReady-to-Use Laser Markers
The Mark of excellence Ready-to-Use Laser Markers PowerLine Prime Series we think laser Setting the Mark ROFIN offers an unparalleled laser product portfolio, comprising 1064 nm, 532 nm and 355 nm wavelength
More informationTHE FAMILY OF MANUAL WELDING LASERS FROM DESKTOP TO OPEN SYSTEM
FOCUS ON FINE SOLUTIONS THE FAMILY OF MANUAL WELDING LASERS FROM DESKTOP TO OPEN SYSTEM Manual Welding with Lasers The laser is an excellent tool for welding of almost all common metals and their alloys.
More informationTHE FAMILY OF MANUAL WELDING LASERS FROM DESKTOP TO OPEN SYSTEM
FOCUS ON FINE SOLUTIONS THE FAMILY OF MANUAL WELDING LASERS FROM DESKTOP TO OPEN SYSTEM Manual Welding with Lasers The laser is an excellent tool for seam, butt and overlap welding of almost all common
More informationLaser solutions for general marking applications
THE MARK OF EXCELLENCE Laser solutions for general marking applications WE THINK LASER ROFIN Lasers for industrial material processing ROFIN is a global leader in developing and manufacturing of industrial
More informationMarking Cutting Welding Micro Machining Additive Manufacturing
Marking Cutting Welding Micro Machining Additive Manufacturing Slide: 1 CM-F00003 Rev 4 G4 Pulsed Fiber Laser Slide: 2 CM-F00003 Rev 4 Versatility for Industry Automotive 2D/3D Cutting Night & Day Marking
More informationLASER TECHNOLOGY. Key parameters. Groundbreaking in the laser processing of cutting tools. A member of the UNITED GRINDING Group
Creating Tool Performance A member of the UNITED GRINDING Group Groundbreaking in the laser processing of cutting tools Key parameters The machining of modern materials using laser technology knows no
More informationLaser MicroJet Technology. Cool Laser Machining.
Laser MicroJet Technology Cool Laser Machining www.synova.ch Synova S.A., headquartered in Duillier, Switzerland, manufactures leading-edge laser cutting systems since 1997 that incorporate the proprietary
More informationCOHERENT BEAM COMBINING OF HIGH POWER LASERS FOR MATERIALS PROCESSING
COHERENT BEAM COMBINING OF HIGH POWER LASERS FOR MATERIALS PROCESSING www.civan.co.il EXECUTIVE SUMMARY Civan Advanced Technologies develops and manufactures single-mode, highpower laser systems with a
More informationYou have a task. We have a solution. flo-ir berührungslos messen
flo-ir berührungslos messen Aawasserstrasse 10 CH 6370 Oberdorf, NW Tel.: +41 (0)41 871 39 88 Fax: +41 (0)41 871 39 87 info@flo-ir.ch www.flo-ir.ch You have a task We have a solution - 2 - What can be
More informationModular multifunction micro-machining platform for European SMEs
Modular multifunction micro-machining platform for European SMEs Microsystem technology and micro-machining are innovative key technologies of the presence and future. However, for small and medium enterprises
More informationRear Side Processing of Soda-Lime Glass Using DPSS Nanosecond Laser
Lasers in Manufacturing Conference 215 Rear Side Processing of Soda-Lime Glass Using DPSS Nanosecond Laser Juozas Dudutis*, Paulius Gečys, Gediminas Račiukaitis Center for Physical Sciences and Technology,
More informationWHERE WE LIVE, QUALITY HAS A LONG TRADITION STREAM FINISHING UNITS SF SERIES. Precision finish demands. Precision finish demands. CF Series.
Precision finish demands Precision finish demands WHERE WE LIVE, QUALITY HAS A LONG TRADITION Founded in 1996, OTEC has quickly established itself as the market s technology leader by developing new machine
More informationMidaz Micro-Slab DPSS Lasers:
Midaz Micro-Slab DPSS Lasers: Higher power & pulse rate for higher speed micromachining Professor Mike Damzen Midaz Laser Ltd 4 June 2008 AILU Meeting Industrial opportunities in laser micro and nano processing
More informationAGC Glass Technology Solution to Highly Functional Display Needs
AGC Glass Technology Solution to Highly Functional Display Needs Takahiro IKEZAKI Vice President Electronics Glass General Division, AGC Electronics, Asahi Glass Co., Ltd. June 5, 2012 -Contents- AGC Strengths
More informationTRUMPF Group Business Divisions
State of the art laser systems for materials processing Carsten Keim International Sales Lasers and Laser Systems TRUMPF Laser- und Systemtechnik GmbH TWI Cambridge, UK 07 July 2009 TRUMPF - State of the
More informationLaser Experts in Semiconductor Manufacturing
Laser Experts in Semiconductor Manufacturing Backed by more than three decades of experience in laser material processing, ROFIN is one of the best established companies in this field. The company has
More informationNovel laser power sensor improves process control
Novel laser power sensor improves process control A dramatic technological advancement from Coherent has yielded a completely new type of fast response power detector. The high response speed is particularly
More informationMikrobohren mit gepulsten Faserlasern
Mikrobohren mit gepulsten Faserlasern Ronald Holtz (Class 4 Laser Professionals AG) Christoph Rüttimann, Noémie Dury (Rofin Lasag AG) Content - Market and applications overview - Properties of lamp pumped
More informationDiverse Lasers Support Key Microelectronic Packaging Tasks
Diverse Lasers Support Key Microelectronic Packaging Tasks Written by D Muller, R Patzel, G Oulundsen, H Halou, E Rea 23 July 2018 To support more sophisticated and compact tablets, phones, watches and
More informationASD-Cx / ASD-H25 Industrial Air Bearing Motor Spindles. ASD-H25 with axial connectors (ASD-H25A)
Levicron GmbH Sauerwiesen 6 D-67661 Kaiserslautern Tel.: +49 (0) 6301 718 57 25 Fax: +49 (0) 6301 718 57 56 info@levicron.com www.levicron.com ASD-Cx / ASD-H25 Industrial Air Bearing Motor Spindles Features
More informationPrecision Cold Ablation Material Processing using High-Power Picosecond Lasers
Annual meeting Burgdorf Precision Cold Ablation Material Processing using High-Power Picosecond Lasers Dr. Kurt Weingarten kw@time-bandwidth.com 26 November 2009 Background of Time-Bandwidth Products First
More informationInfinitely Precise. micrometal. excellence in etching
Infinitely Precise micrometal excellence in etching A High-Tech Profile Superfine structures and ultra-tight tolerances: precision is our business You give us the specs, and we etch to ultra-tight tolerances.
More informationPractical Applications of Laser Technology for Semiconductor Electronics
Practical Applications of Laser Technology for Semiconductor Electronics MOPA Single Pass Nanosecond Laser Applications for Semiconductor / Solar / MEMS & General Manufacturing Mark Brodsky US Application
More informationThe Future Of Packaging. Laser Solutions For The Packaging Industry
The Future Of Packaging Laser Solutions For The Packaging Industry LASER The Key Technology for the Packaging Market In today s consumer goods market the customers buying decision is strongly influenced
More informationBeam Shaping Excellence
Beam Shaping Excellence 300 patents 200 employees 13 countries 2 Every photon. In the right place, at the right time. LIMO: The world of beam shaping Whether it's materials processing, illumination or
More informationAdvances in Laser Micro-machining for Wafer Probing and Trimming
Advances in Laser Micro-machining for Wafer Probing and Trimming M.R.H. Knowles, A.I.Bell, G. Rutterford & A. Webb Oxford Lasers June 10, 2002 Oxford Lasers June 2002 1 Introduction to Laser Micro-machining
More informationHigh power UV from a thin-disk laser system
High power UV from a thin-disk laser system S. M. Joosten 1, R. Busch 1, S. Marzenell 1, C. Ziolek 1, D. Sutter 2 1 TRUMPF Laser Marking Systems AG, Ausserfeld, CH-7214 Grüsch, Switzerland 2 TRUMPF Laser
More informationFocus on Fine Solutions
WE THINK LASER ROFIN - The open minded consultant - 2 - ROFIN - We know your applications Macro Cutting Welding Surface modification Micro Fine welding Fine cutting Micro structuring Micro drilling Perforation
More informationUltrafast Lasers with Radial and Azimuthal Polarizations for Highefficiency. Applications
WP Ultrafast Lasers with Radial and Azimuthal Polarizations for Highefficiency Micro-machining Applications Beneficiaries Call Topic Objective ICT-2013.3.2 Photonics iii) Laser for Industrial processing
More informationICALEO 2007, October 29 November 1, Hilton in the WALT DISNEY WORLD Resort, Orlando, FL, USA
WHAT IS THE BEST CHOICE FOR LASER MATERIAL PROCESSING ROD, DISK, SLAB OR FIBER? Paper 201 Erwin Steiger Erwin Steiger LaserService, Graf-Toerring-Strasse 68, Maisach, Bavaria, 82216, Germany Abstract Laser
More informationDesign & Manufacturing Demands in Laser Automotive Prototyping Gordon McIntosh President, SWS-Trimac
Design & Manufacturing Demands in Laser Automotive Prototyping Gordon McIntosh President, SWS-Trimac SWS-Trimac, Inc. is an Engineering company that specializes in Electron Beam & Laser Welding, CNC Machining,
More informationLecture 25: Cutting of Glass
IMI-NFG Glass Processing Course Spring 2015 (available online www.lehigh.edu/imi) Lecture 25: Cutting of Glass Christoph Hermanns, PhD MDI Advanced Processing GmbH Mainz, Germany Introduction Our Mother
More informationStudying the Effect of Using Assist Gas with Low Power CO 2 LaserGlass Drilling
American Journal of Engineering Research (AJER) 2018 American Journal of Engineering Research (AJER) e-issn: 2320-0847 p-issn : 2320-0936 Volume-7, Issue-1, pp-23-27 www.ajer.org Research Paper Open Access
More informationMicroprecision waterjet cutting / waterjet fine machining
Microprecision waterjet cutting / waterjet fine machining Opportunities and potential of a new production process as an example for punched plates, samples, prototypes, and small to medium runs What is
More informationNON-TRADITIONAL MACHINING PROCESSES ULTRASONIC, ELECTRO-DISCHARGE MACHINING (EDM), ELECTRO-CHEMICAL MACHINING (ECM)
NON-TRADITIONAL MACHINING PROCESSES ULTRASONIC, ELECTRO-DISCHARGE MACHINING (EDM), ELECTRO-CHEMICAL MACHINING (ECM) A machining process is called non-traditional if its material removal mechanism is basically
More informationSTREAM FINISHING MACHINES
Structure and function 2 (SF) Technique Workpieces are fixed in a holder and immersed in a rotating process container filled with grinding or polishing granulate. Grinding effect due to the grinding and
More informationWho we are. was born in 2006 as Spin-Off of Politecnico of Torino. Full time people employed 8. Laboratories and facilities 300 m 2
Who we are was born in 2006 as Spin-Off of Politecnico of Torino Full time people employed 8 Laboratories and facilities 300 m 2 Administration and offices 250 m 2 Consolidated Turnover more then 600k
More informationPowerMax-Pro Sensors. 100 mw to 150W FEATURES
PowerMax-Pro Sensors PowerMax-Pro (Patent #9,012,848) represents a dramatic technological advancement in laser power sensing that combines the broad wavelength sensitivity, dynamic range and laser damage
More informationMercury TM 1200 PCB-Mount Analog Encoders
Mercury TM 1200 PCB-Mount Analog Encoders For Customer Interpolation- Resolution to 0.078μm Reflective Linear and Rotary Encoders Sensor the size of a Dime Resolution Determined by Customer Electronics
More informationHigh speed laser machining using polygon scanner technology. Ronny De Loor CEO, Next Scan Technology
High speed laser machining using polygon scanner technology Ronny De Loor CEO, Next Scan Technology Overview Company introduction Polygon scanner system Applications Future developments Mission statement
More informationPlan Optik AG. Plan Optik AG PRODUCT CATALOGUE
Plan Optik AG Plan Optik AG PRODUCT CATALOGUE 2 In order to service the high demand of wafers more quickly, Plan Optik provides off the shelf products in sizes from 2 up to 300mm diameter. Therefore Plan
More informationThe Laser Processing of Diamond and Sapphire
The Laser Processing of Diamond and Sapphire Neil Sykes Micronanics Limited neil@micronanics.com Diamond Diamond has the highest hardness and thermal conductivity of any bulk material 10/10 on the Mohs
More informationDrilling of Glass by Excimer Laser Mask Projection Technique Abstract Introduction Experimental details
Drilling of Glass by Excimer Laser Mask Projection Technique Bernd Keiper, Horst Exner, Udo Löschner, Thomas Kuntze Laserinstitut Mittelsachsen e.v., Hochschule Mittweida, University of Applied Sciences
More informationMicrodrilling Technology using Short Pulsed-laser
21 Microdrilling Technology using Short Pulsed-laser KIYOTAKA NAKAGAWA *1 TSUGUMARU YAMASHITA *2 YOSHIHITO FUJITA *3 HARUHIKO NIITANI *4 In recent years, laser machining is highly anticipated as a technology
More informationnanovea.com PROFILOMETERS 3D Non Contact Metrology
PROFILOMETERS 3D Non Contact Metrology nanovea.com PROFILOMETER INTRO Nanovea 3D Non-Contact Profilometers are designed with leading edge optical pens using superior white light axial chromatism. Nano
More informationBy: Louise Brown, PhD, Advanced Engineered Materials Group, National Physical Laboratory.
NPL The Olympus LEXT - A highly flexible tool Confocal Metrology at the NPL By: Louise Brown, PhD, Advanced Engineered Materials Group, National Physical Laboratory. www.npl.co.uk louise.brown@npl.co.uk
More informationInnovations in Laser Technologies and European scale
Vilnius Innovation Forum, 3-4 September, 2015 Innovations in Laser Technologies and European scale Dr. Gediminas Račiukaitis Head of Department of Laser Technologies Center for Physical Sciences and Technology
More informationADVANCES IN USING A POLYMERIC TAPE FOR LASER-INDUCED DEPOSITION AND ABLATION
ADVANCES IN USING A POLYMERIC TAPE FOR LASER-INDUCED DEPOSITION AND ABLATION Arne Koops, tesa AG, Hamburg, Germany Sven Reiter, tesa AG, Hamburg, Germany 1. Abstract Laser systems for industrial materials
More informationCurrent status of Disk Lasers for sheetmetal cutting and welding
Current status of Disk Lasers for sheetmetal cutting and welding Iwan Papic, Gerry Jones TRUMPF Luton AILU 12 November 2008 Disk lasers for cutting and welding 12.11.2008 Presentation outline Disk laser
More informationSealed CO 2 DIAMOND. Sealed CO 2 Laser Systems. Reliable Lasers for Precision Machining
Coherent Sealed CO 2 RF-Excited DIAMOND Sealed CO 2 Laser Systems Reliable Lasers for Precision Machining Brilliance DIAMOND K-Series and G-Series lasers feature Brilliance, a combination of mode quality,
More informationBeam deflection technologies for ultra short pulse lasers June 5th, 2018
Beam deflection technologies for ultra short pulse lasers June 5th, 2018 Agenda SCANLAB GmbH XL Scan excellishift precsys 2 SCANLAB at a Glance Worldwide leading OEM manufacturer of scan solutions for
More informationLaser-induced transfer of PVD-films
Laser-induced transfer of PVD-films Laser Transfer ARA-LT and ARA Authentic-LT PVD films are applied directly from the carrier foil to the product surface by using a laser beam. The ARA-LT and ARA Authentic-LT
More informationNanoTechnology Made in Germany Medical Healthcare. gbneuhaus.de.
NanoTechnology Made in Germany Medical Healthcare gbneuhaus.de sales@gbneuhaus.de Welcome to the heights of the Thuringian Forest GBneuhaus (GBn) is a leading supplier of individual coating solutions that
More informationUltimate code quality on a wide variety of substrates. Coding and marking sample guide CO 2. Laser
Ultimate code quality on a wide variety of substrates Coding and marking sample guide CO 2 Laser Achieving the best laser mark is all about the specification process. Laser marking systems can generate
More informationTitle: Laser marking with graded contrast micro crack inside transparent material using UV ns pulse
Cover Page Title: Laser marking with graded contrast micro crack inside transparent material using UV ns pulse laser Authors: Futoshi MATSUI*(1,2), Masaaki ASHIHARA(1), Mitsuyasu MATSUO (1), Sakae KAWATO(2),
More informationUV-Marking Development of new laser for customization at industrial level through high quality marking on different materials
UV-Marking Development of new laser for customization at industrial level through high quality marking on different materials Coordinated by B/S/H A collaboration between: B/S/H ROFIN SINAR LASER GMBH
More informationSolve every task perfectly.
Lasers: Solve every task perfectly. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology Impressive diversity. Contents Impressive diversity. 2 Lasers: All around versatility.
More informationPicoBlade 2 Picosecond Micromachining Laser. Precision and flexibility for optimized processes a fully featured, machine-ready system
PicoBlade 2 Picosecond Micromachining Laser Precision and flexibility for optimized processes a fully featured, machine-ready system www.lumentum.com Data Sheet The PicoBlade 2 laser system is a versatile
More informationSintec Optronics Technology Pte Ltd 10 Bukit Batok Crescent #07-02 The Spire Singapore Tel: Fax:
Sintec Optronics Technology Pte Ltd 10 Bukit Batok Crescent #07-02 The Spire Singapore 658079 Tel: +65 63167112 Fax: +65 63167113 High-power Nd:YAG Self-floating Laser Cutting Head We supply the laser
More informationApplication of EOlite Flexible Pulse Technology. Matt Rekow Yun Zhou Nicolas Falletto
Application of EOlite Flexible Pulse Technology Matt Rekow Yun Zhou Nicolas Falletto 1 Topics Company Background What is a Flexible Pulse Laser? Why Tailored or Flexible Pulse? Application of Flexible
More informationSCANLAB Perfect Scanning
mirrors in motion SCANLAB Perfect Scanning Galvanometer scanners High-performance laser scan systems Objectives and focusing units Components for system integration Software Customer-specific system development
More information3M Automotive Window Films Looks Hot. Feels Cool.
3M Automotive Window Films Looks Hot. Feels Cool. 3M Automotive Films. Heritage. Technology. Warranty. At 3M, we believe that science is just science until you apply it to life and use it to improve the
More informationProSeries Scan Head 2-Axis, Enclosed
Product Highlights Our ProSeries 2-Axis enclosed scan heads are designed for a broad range of applications that require fast processing speeds or high-position accuracy. The plug-and-play scan heads are
More informationElectrical Discharge Machining - Wire Cut. Presented and Arranged by: Khairu bin Kamarudin
Electrical Discharge Machining - Wire Cut Presented and Arranged by: Khairu bin Kamarudin Introduction EDM Wire Cut Machining method primarily used for hard metals or those that would be impossible to
More informationESCC2006 European Supply Chain Convention
ESCC2006 European Supply Chain Convention PCB Paper 20 Laser Technology for cutting FPC s and PCB s Mark Hüske, Innovation Manager, LPKF Laser & Electronics AG, Germany Laser Technology for cutting FPCs
More informationPlease contact T E L : ~ 4.
Please contact T E L : +82-32-623-6320~ 4 E-MAIL : sales@kortherm.co.kr jshuh@kortherm.co.kr 1. LASER SAMPLE TEST - To serve companies and individuals who need sample tests before buying new laser micromachining
More informationLight Panel ONE Series
Light Panel ONE Series About Us LIGHTPANEL (USA) Inc. is part of a group of German owned businesses specializing in the engineering and manufacturing of custom LED lighting solutions for over 20 years.
More informationUltrasonic Machining. 1 Dr.Ravinder Kumar
Ultrasonic Machining 1 Dr.Ravinder Kumar Why Nontraditional Processes? New Materials (1940 s) Stronger Tougher Harder Applications Cut tough materials Finish complex surface geometry Surface finish requirements
More informationLaser MicroJet Frequently Asked Questions
Laser MicroJet Frequently Asked Questions Who is Synova? Synova is the inventor and patent owner of a new laser cutting technology (the Laser-Microjet) and provides its systems for a broad range of micromachining
More informationSNAPP Swiss National Applicaton Laboratory for Photonic tools and Photonic manufacturing
SNAPP Swiss National Applicaton Laboratory for Photonic tools and Photonic manufacturing Details of SNAPP Look into the laboratories of the partner Swiss National Photonics Labs SNAPP Swiss National Applicaton
More informationUltrashort Pulse Laser Processing of Transparent Materials
Ultrashort Pulse Laser Processing of Transparent Materials Fumiyo YOSHINO, Haibin ZHANG and Alan ARAI IMRA America, Inc., Applications Research Laboratory 48834 Kato Road, Suite 106A, Fremont, CA 94538
More informationThermal glass tube processing with laser beam SINCE 1950
Thermal glass tube processing with laser beam SINCE 1950 Target applica on Thermal glass tube processing with laser beam Labglass: Lamp glass: joining, forming, cu ng joining For the first me in public
More informationAVIA DPSS Lasers: Advanced Design for Increased Process Throughput
White Paper AVIA DPSS Lasers: Advanced Design for Increased Process Throughput The Q-switched, diode-pumped, solid-state (DPSS) laser has become a widely employed tool in a broad range of industrial micromachining
More informationNontraditional Machining Techniques
Chapter 28 Nontraditional Machining Techniques LEARNING OBJECTIVES After studying this chapter, students will be able to: Describe several nontraditional machining techniques. Explain how nontraditional
More informationConfocal chromatic sensors and confocal microscope Micrometer measurement of thickness, displacement, position
Confocal chromatic sensors and confocal microscope Micrometer measurement of thickness, displacement, position 2 optoncdt 2401 Confocal displacement measurement system - Non-contact measurement principle
More informationDouble Emulsion Chip (100 μm etch depth), water-oil-water Part No
Unit 1, Anglian Business Park, Orchard Road, Royston, Hertfordshire, SG8 5TW, UK T: +44 (0)1763 242491 F: +44 (0)1763 246125 E: sales@dolomite-microfluidics.com W: www.dolomite-microfluidics.com Dolomite
More informationPROGRESS IN CUTTING AND WELDING OF SHEET METAL ASSEMBLIES IN ONE MACHINE WITH THE LASER COMBI-HEAD Invited paper (1001)
PROGRESS IN CUTTING AND WELDING OF SHEET METAL ASSEMBLIES IN ONE MACHINE WITH THE LASER COMBI-HEAD Invited paper (1001) Dirk Petring 1, Frank Schneider 1, Harald Dickler 2 1 Fraunhofer-Institute for Laser
More informationOptions Markers Pneumatic marking For punching and engraving plates. The depth of marking is controlled by varying the compressed air pressure and the speed. Recommended for use on plates thicker than
More informationLaser Application DAL7020 DFL7020 DFL7161 DFL7160 DFL7341 DFL7360FH DFL7361 DFL7560L. Ablation Process. Stealth Dicing.
Laser Application Ablation Process Stealth Dicing Laser Lift Off DAL7020 DFL7020 DFL7161 DFL7160 DFL7341 DFL7360FH DFL7361 DFL7560L ABLATION PROCESS DISCO s laser application lineup supports miniaturized
More informationwaterjet micro-precision-cutting chances and possibilities of a new manufacturing process
waterjet micro-precision-cutting chances and possibilities of a new manufacturing process waterjet micro-precision-cutting If we evaluate a new cutting process we must answer a number of questions to understand
More informationLED Cost and Technology Trends: How to enable massive adoption in general lighting
LED Cost and Technology Trends: How to enable massive adoption in general lighting SEMICON West 2011 Moscone Center, San Francisco June 13 th 2011 Lumileds Lumileds OSRAM Aixtron CREE OSRAM OKI OSRAM 45
More informationMicroelectronics Packaging AS FEATURES GET SMALLER, THE ROLE FOR LASERS GETS LARGER
MEMS ARTICLE Microelectronics Packaging AS FEATURES GET SMALLER, THE ROLE FOR LASERS GETS LARGER DIRK MÜLLER, MICROELECTRONICS AND SOLAR MARKET SEGMENT MANAGER, RALPH DELMDAHL, PRODUCT MARKETING MANAGER,
More informationLMT F14. Cut in Three Dimensions. The Rowiak Laser Microtome: 3-D Cutting and Imaging
LMT F14 Cut in Three Dimensions The Rowiak Laser Microtome: 3-D Cutting and Imaging The Next Generation of Microtomes LMT F14 - Non-contact laser microtomy The Rowiak laser microtome LMT F14 is a multi-purpose
More informationIndustrial Product Guide Marking, Coding & System Solutions
Ink Jet. Laser. Thermal Transfer. Labelers. Track & Trace. Supplies. Parts & Service. Industrial Product Guide Marking, Coding & System Solutions Videojet 1220 Ink Jet Printer This continuous ink jet printer
More informationthe LooX LIgHtINg SySteM LeD lighting systems for furniture and furnishings
www.hafele.com the LooX LIgHtINg SySteM LeD lighting systems for furniture and furnishings THE LIGHTING SYSTEM Contents Lighting systems for furniture and furnishings Introduction 12 V system 24 V system
More informationThe idea - drilling without tool wear
The idea - drilling without tool wear EB drilling process 47.20.01e/16 The first electron beam machine was a drilling machine which was used for drilling holes in the jewel bearings of watches. It was
More informationThe Leitz power package for window and door production on CNC controlled machines. RipTec ripple technology. HSC technology
The Leitz power package for window and door production on CNC controlled machines RipTec ripple technology HSC technology Combined window tool systems Light metal alloy tools, coated drills and router
More informationSpeckle free laser projection
Speckle free laser projection With Optotune s Laser Speckle Reducer October 2013 Dr. Selina Casutt, Application Engineer Bernstrasse 388 CH-8953 Dietikon Switzerland Phone +41 58 856 3011 www.optotune.com
More informationMercury TM 1500 Digital Output Encoder Systems
Mercury TM 1500 Digital Output Encoder Systems Factory Set Resolution to 0.50μm Reflective Linear and Rotary Encoders Available with standard 15 pin D-sub connector or Micro connector Sensor the size of
More informationplasmonic nanoblock pair
Nanostructured potential of optical trapping using a plasmonic nanoblock pair Yoshito Tanaka, Shogo Kaneda and Keiji Sasaki* Research Institute for Electronic Science, Hokkaido University, Sapporo 1-2,
More informationThe RSH Catalogue. Laser Optics & Lenses
The RSH Catalogue Laser Optics & Lenses 2013 2014 1 Company Profile RSH Optronics, Headquartered in Ajmer, Rajasthan, India, is the leading supplier & manufacturer for Photonics Products (Optics, Laser
More informationLITE /LAB /SCAN /INLINE:
Metis Metis LITE /LAB /SCAN/ INLINE Metis LITE /LAB /SCAN /INLINE: Spectral Offline and Inline Measuring System, using Integrating Sphere, for coatings on foils/web and on large size glasses To ensure
More information6 Electromagnetic Field Distribution Measurements using an Optically Scanning Probe System
6 Electromagnetic Field Distribution Measurements using an Optically Scanning Probe System TAKAHASHI Masanori, OTA Hiroyasu, and ARAI Ken Ichi An optically scanning electromagnetic field probe system consisting
More informationA novel QA approach to combined In- Line Defect/Pinhole detection and coating Opacity measurement.
A novel QA approach to combined In- Line Defect/Pinhole detection and coating Opacity measurement. Authors: Mr. Matthieu Richard, Mr. Olivier Porret BOBST, CORES, COntrol & REgister Solutions, Lausanne
More informationintelliscan smart scanning
smart scanning SCANLAB's scan heads stand out with variant diversity and high dynamics. They're among the 2D scan systems that enable deflecting and positioning of laser beams in the working plane. The
More informationUSES AND APPLICATIONS
GLASS WITH USES AND APPLICATIONS DATA SHEET / Quebec Version 1.0 The PRIVACY Priva-S is smart glass that provides instant privacy at the flick of a switch. In each Priva-S glass pane, a film is laminated
More informationPowerPack by Leitz Efficiency and quality when producing windows and doors
PowerPack by Leitz Efficiency and quality when producing windows and doors n Ripple technology n Integral solution n High-speed cutting n Innovative tooling systems n Functional coating n Hybrid flexibility
More information