EDS LV ELECTRICAL SERVICE DRAWINGS
|
|
- Oliver Cox
- 5 years ago
- Views:
Transcription
1 Document Number: EDS Network(s): Summary: ENGINEERING DESIGN STANDARD EDS LV ELECTRICAL SERVICE DRAWINGS EPN, LPN, SPN This standard details the drawings for service positions and connection arrangements associated with LV customer supplies Author: Stephen Cuddihey Approver: Paul Williams Date: 08/10/2018 This document forms part of the Company's Integrated Business System and its requirements are mandatory throughout UK Power Networks. Departure from these requirements may only be taken with the written approval of the Director of Asset Management. If you have any queries about this document please contact the author or owner of the current version. Circulation UK Power Networks External Asset Management UK Power Networks Services Capital Programme Contractors Connections ICPs/IDNOs Health & Safety Meter Operators Legal G81 Website Network Operations Procurement Strategy & Regulation Technical Training THIS IS AN UNCONTROLLED DOCUMENT, THE READER MUST CONFIRM ITS VALIDITY BEFORE USE
2 Revision Record Version 5.0 Review Date 22/09/2021 Date 07/02/2018 Author Stephen Cuddihey Reason for change: A new suite of GRP kiosks have been approved for use in lieu of the brick-built cubicle solution. EDS drawings replace EDS (to be withdrawn) What has changed: All drawings have been renumbered. Reference to any legacy drawings has been removed. Re-numbered from EDS Version 4.0 Review Date 22/09/2021 Date 22/09/2016 Author Jesse Garcia As a result of consultation with the technical review forum and customer input to UK Power Networks staff the following additions and revisions have been made: The creation of additional of drawings 15, 16, 17 to reflect the new combined CT-Chamber, Addition of cable and trunking information to drawings 03, 04, a, 04a and 05a have also been amended since they were last published on Alfresco. Minimum and maximum height measurements have been added to the cut-outs and they have become version 2 as attached. A reference to cut-out height has been added to drawing 06. The reference to EA has been removed from drawings 11 to mm preformed tube replaced with 38mm preformed tube in drawing 14. Version 3.0 Review Date 19/08/2017 Date 19/08/2014 Author Stephen Cuddihey As a result of consultation with the technical review forum and customer input to UK Power Networks staff the following additions and revisions have been made: Addition of drawings 03a, 04a, 05a to reflect installations without CT metering in the case of full settlements metering. Addition of drawing 13 to reflect the inclusion of internally mounted hockey sticks in EDS Addition of drawing 14 to recognise that 100A TPN cut outs may be installed in domestic properties for which drawings 01 and 02 are not feasible. Revision of drawing 07 to provide guidance for all meter box sizes. Version 2.0 Review Date 19/08/2014 Date 21/08/2013 Author Stephen Cuddihey Addition of drawings 01 & 02, revision of 03,04 & 05 to include additional dimensions, revision of 06, 09, 10, 11 & 12 to reflect wider review comments. UK Power Networks 2018 All rights reserved 2 of 5
3 Contents 1 Introduction Scope Glossary and Abbreviations Approved Drawing Index References... 5 UK Power Networks 2018 All rights reserved 3 of 5
4 1 Introduction This standard details the drawings for service positions and connection arrangements associated with LV customer supplies. These drawings shall be used when designing and planning new services. The detailed planning and position requirements of the customer shall be agreed with UK Power Networks and all service arrangements derived from these drawings shall be approved by UK Power Networks. The service drawings listed in Section 4 are available as pdf files under the EDS title. Note: The service drawings are indicative of typical service arrangements and do not indicate the boundaries of ownership or operational limitations for UK Power Networks. Please consult the appropriate connections standards for each situation. 2 Scope Information referring to the construction of secondary substations and civil design requirements can be found in EDS Drawings referring to the installation and arrangement of LV and HV distribution cables can be found in ECS Glossary and Abbreviations Term Definition CT Current Transformer LV Voltages up to 1000V; generally used to describe 230/400V or 230/460V distribution systems HV UK Power Networks Voltages above 1000V; generally used to describe 11kV or 6.6kV distribution systems but may include higher or other legacy voltages UK Power Networks (Operations) Ltd consists of three electricity distribution networks: Eastern Power Networks plc (EPN). London Power Network plc (LPN). South Eastern Power Networks plc (SPN). UK Power Networks 2018 All rights reserved 4 of 5
5 4 Approved Drawing Index Drawing Number EDS EDS EDS EDS EDS EDS EDS EDS EDS EDS EDS EDS EDS EDS EDS EDS Drawing Description 100A Single Phase & Neutral Surface Mounted Meter Box Layout 100A Single Phase & Neutral Flush Mounted Meter Box Layout 100A Single Phase & Neutral Flush Mounted Meter Box Layout with Internal Hockey Stick 100A Three Phase & Neutral Cut-out in Large Flush Mounted Meter Box 100A Three Phase & Neutral Cut-out at Ground Level Standard Entry 100A Three Phase & Neutral Cut-out at Basement Level 200A & 400A Three Phase & Neutral Cut-out at Ground Level Standard Entry 400A Three Phase & Neutral with CTs Cut-out at Ground Level Standard Entry 200A & 400A Three Phase & Neutral Cut-out at Basement Level 400A Three Phase & Neutral with CTs Cut-out at Basement Level 200A & 400A Three Phase & Neutral Cut-out Direct from a Substation 400A Three Phase & Neutral with CTs Cut-out Direct from a Substation Service Termination Cabinet to Accommodate Cut-out for Metered Supplies; Permanent or Temporary Typical Surround Details for a Surface Mounted External Meter Cabinet for use with Existing Solid Walls Balancing and Settlements Code of Practise 3 LV & HV Meter Chamber Balancing and Settlements Code of Practise 5 LV & HV Meter Chamber 5 References ECS EDS Installation of Underground Cables LV to 132kV Pre-design Requirements for Secondary Substations UK Power Networks 2018 All rights reserved 5 of 5
ECP COMPACT AND MICRO SUBSTATION COMMISSIONING PROCEDURE
Network(s): Summary: ENGINEERING COMMISSIONING PROCEDURE ECP 11-0507 COMPACT AND MICRO SUBSTATION COMMISSIONING PROCEDURE EPN, LPN, SPN This procedure details the testing and commissioning procedures for
More informationEDS GRID AND PRIMARY SUBSTATION CIVIL DESIGN STANDARDS
Document Number: EDS 07-0105 ENGINEERING DESIGN STANDARD EDS 07-0105 GRID AND PRIMARY SUBSTATION CIVIL DESIGN STANDARDS Network(s): Summary: EPN, LPN, SPN This design standard details the current civil
More informationECP HV METERING EQUIPMENT COMMISSIONING PROCEDURE
THIS IS AN UNCONTROLLED DOCUMENT, THE READER MUST CONFIRM ITS VALIDITY BEFORE USE Document Number: ECP 11-0515 ENGINEERING COMMISSIONING PROCEDURE ECP 11-0515 HV METERING EQUIPMENT COMMISSIONING PROCEDURE
More informationEDS LV WAVEFORM MAINS CABLE RATINGS
Document Number: EDS 02-0033 Network(s): Summary: ENGINEERING DESIGN STANDARD EDS 02-0033 LV WAVEFORM MAINS CABLE RATINGS EPN, LPN, SPN This standard details the technical and practical information required
More informationEDS LV SUPPLIES TO MOBILE PHONE BASE STATIONS MOUNTED ON TRANSMISSION TOWERS
ENGINEERING DESIGN STANDARD EDS 08-2109 LV SUPPLIES TO MOBILE PHONE BASE STATIONS MOUNTED ON TRANSMISSION TOWERS Network(s): Summary: EPN, LPN, SPN This standard provides guidance on the installation of
More informationEDS KV TRIPLEX CABLE RATING
Document Number: EDS 02-0027 Network(s): Summary: EPN, LPN, SPN ENGINEERING DESIGN STANDARD EDS 02-0027 11KV TRIPLEX CABLE RATING This engineering design standard provides the cable ratings and important
More informationECP HV INSULATION TESTING
Document Number: ECP 11-0006 Network(s): Summary: All ENGINEERING COMMISSIONING PROCEDURE ECP 11-0006 HV INSULATION TESTING This standard details the policy for the on-site insulation testing of new and
More informationECP DISTRIBUTION TRANSFORMER COMMISSIONING PROCEDURE
Document Number: ECP 11-0506 ENGINEERING COMMISSIONING PROCEDURE ECP 11-0506 DISTRIBUTION TRANSFORMER COMMISSIONING PROCEDURE Network(s): Summary: EPN, LPN, SPN This procedure details the testing and commissioning
More informationECP HV INSULATION TESTING
Document Number: ECP 11-0006 Network(s): Summary: ENGINEERING COMMISSIONING PROCEDURE EPN, LPN, SPN ECP 11-0006 HV INSULATION TESTING This standard details the policy for the on-site insulation testing
More informationECP GROUND-MOUNTED SWITCHGEAR WITH PROTECTION RELAYS COMMISSIONING PROCEDURE
ENGINEERING COMMISSIONING PROCEDURE ECP 11-0512 GROUND-MOUNTED SWITCHGEAR WITH PROTECTION RELAYS COMMISSIONING PROCEDURE Network(s): Summary: EPN, LPN, SPN This procedure details the testing and commissioning
More informationECP GROUND-MOUNTED SWITCHGEAR COMMISSIONING PROCEDURE
Document Number: ECP 11-0511 Network(s): Summary: ENGINEERING COMMISSIONING PROCEDURE ECP 11-0511 GROUND-MOUNTED SWITCHGEAR COMMISSIONING PROCEDURE EPN, LPN, SPN This procedure details the testing and
More informationUK Power Networks OPERATIONAL BULLETIN
Document No: HSS 406 OB 160 Issue Date: 10 July 2018 Type: Operational Safety Subject: Changes to DSR procedures 2018/1 Applicable Areas: All Applicable Job Roles: All DSR holders Issued By: Dudley Sparks
More informationEDS FAULT LEVELS
Document Number: EDS 08-1110 Network(s): Summary: EPN, LPN, SPN ENGINEERING DESIGN STANDARD EDS 08-1110 FAULT LEVELS This standard provides guidance on the calculation, application and availability of
More informationEDS KV SINGLE CORE XLPE CABLES
THIS IS AN UNCONTROLLED DOCUMENT, THE READER MUST CONFIRM ITS VALIDITY BEFORE USE Document Number: EDS 02-0034 ENGINEERING DESIGN STANDARD EDS 02-0034 33KV SINGLE CORE XLPE CABLES Network(s): EPN, LPN,
More informationEI HIGH VOLTAGE INSULATION TESTING POLICY
Network(s): Summary: ENGINEERING INSTRUCTION EI 09-0001 HIGH VOLTAGE INSULATION TESTING POLICY EPN, LPN, SPN This engineering instruction details the policy for the on-site insulation testing of new and
More informationEDS LV NETWORK DESIGN
Document Number: EDS 08-2000 Network(s): Summary: EPN, LPN, SPN ENGINEERING DESIGN STANDARD EDS 08-2000 LV NETWORK DESIGN This standard defines UK Power Networks policy with regard to all aspects of the
More informationELECTRIC NETWORK DESIGN APPROVAL APPLICATION
Please complete all sections of the application form and return to newconnections@ukpowerdistribution.co.uk Section 1 Site Details UKPD Reference Number: Energisation Date: Site Name/Address/Postcode:
More informationNSP/007/019 - Guidance on Substation Design: EHV Substation Drawing Policy
Version:- 1.1 Date of Issue:- Feb 2015 Page 1 of 13 NSP/007/019 - Guidance on Substation Design: EHV Substation Drawing Policy 1. Purpose The purpose of this document is to outline the Northern Powergrid
More informationEDS EHV NETWORK DESIGN
Document Number: EDS 08-4000 Network(s): Summary: EPN, LPN, SPN ENGINEERING DESIGN STANDARD EDS 08-4000 EHV NETWORK DESIGN This standard provides guidance on the design and operation of the 20kV to 132kV
More informationNational Grid UK Electricity Transmission plc. NATIONAL SAFETY INSTRUCTION and Guidance
National Grid UK Electricity Transmission plc NATIONAL SAFETY INSTRUCTION and Guidance NSI 26 RAILWAY CONNECTION CIRCUITS Copyright National Grid plc 2016, all rights reserved. No part of this publication
More informationDISTRIBUTION DESIGN CATALOGUE
DISTRIBUTION DESIGN CATALOGUE Section 15 LM Low Voltage Metering HPC-1DC-07-0015-2014 For application to Horizon Power Electricity Distribution Networks Document Control Author Name: Paul Savig Position:
More informationManual: Distribution Substation Manual (DSM) Section D: Substation Drawing Revision List
Manual: Distribution Substation Manual (DSM) Section D: Substation Drawing Revision List Standard Number: HPC-5DA-07-0011-2012 Document Control Author Name: Viswa Easwaran Position: Standards Engineer
More informationINSTALLATION & TESTING OF UNDERGROUND PRIMARY AND SECONDARY POWER CABLES PRIOR TO ENERGIZATION
TITLE: RECOMMENDED: P. Lemay NO: APPROVED: C. Malone, P.Eng. REV. DATE: 2015-11-02 Working Procedure GCG0001 REV: 3 INSTALLATION & TESTING OF UNDERGROUND PRIMARY AND SECONDARY POWER CABLES PRIOR TO ENERGIZATION
More informationCompany Directive STANDARD TECHNIQUE: SD5F. Relating to connecting multiple small low voltage connections with limited network analysis
Company Directive STANDARD TECHNIQUE: SD5F Relating to connecting multiple small low voltage connections with limited network analysis Policy Summary This document specifies the procedure for connecting
More informationGreenlining and Bluelining of Ergon Energy Substation Drawings
Greenlining and Bluelining of Ergon Energy Table of Contents Purpose and Scope... 1 Responsibilities... 1 Definitions, Abbreviations and Acronyms... 1 References... 1 General... 1 Requirements... 3 Testing
More informationClick to edit Master title style. Click to edit Master title style. Northern Powergrid Asset Recording Guidance
Click to edit Master title style Click to edit Master title style Northern Powergrid Asset Recording Guidance Rules for ICP & IDNO Version 1.0 April 2017 Introduction Accurate records for all assets are
More informationCompany Directive POLICY DOCUMENT: SD4/7. Relating to 11kV and 6.6kV System Design
Company Directive POLICY DOCUMENT: SD4/7 Relating to 11kV and 6.6kV System Design Policy Summary This document describes the standard requirements for the design of the 11kV and 6.6kV systems. Reference
More informationBulk Electric System Definition Reference Document
Bulk Electric System Definition Reference Document Version 2 April 2014 This technical reference was created by the Definition of Bulk Electric System drafting team to assist entities in applying the definition.
More informationSPECIFICATIONS FOR NEW UNDERGROUND RESIDENTIAL DISTRIBUTION SYSTEMS
Page: 4-1 4.0 URD Process and Documentation Requirements 4.1 Process Steps The process of developing underground distribution facilities in a residential area consists of 10 major steps, which are summarized
More informationThe Polytransformer. The Multivoltage Substation Power Transformer
The Polytransformer The Multivoltage Substation Power Transformer The need for a single transformer for different transmission systems. Change of electric power industry to a fully competitive and deregulated
More informationBulk Electric System Definition Reference Document
Bulk Electric System Definition Reference Document JanuaryVersion 2 April 2014 This technical reference was created by the Definition of Bulk Electric System drafting team to assist entities in applying
More informationRuapehu Alpine Lifts. Whakapapa Electrical Network Strategy. Summary Consultation Document. 15 December 2016
Ruapehu Alpine Lifts Whakapapa Electrical Network Strategy Summary Consultation Document 15 December 2016 1. Introduction Local Networks are electricity distribution networks connected to Transpower s
More informationOpen science and research DATA POLICY OF THE UNIVERSITY OF TURKU
Open science and research DATA POLICY OF THE UNIVERSITY OF TURKU 2016 1 INTRODUCTION Decision of the Rector 9 February 2016 The data policy of the University of Turku describes the University level principles
More informationEarthing Requirements for HV Transmission Structures
Engineering Standard Electrical MEST 000002-07 Earthing Requirements for Transmission Structures Version: 1 Issued: February 2015 Owner: Engineering Approved By: Patrick Kelly Head of Electrical Engineering
More informationOrkney Electricity Network Reinforcement Stakeholder Consultation Response. August 2014
Orkney Electricity Network Reinforcement August 2014 Introduction In February 2014 Scottish and Southern Energy Power Distribution 1 (SSEPD) undertook a stakeholder consultation Connecting Orkney: Electricity
More informationWITHDRAWN JULY Manual: Distribution Substation Manual (DSM) Section I: Introduction
Manual: Distribution Substation Manual (DSM) Section I: Introduction Standard Number: HPC-5DA-07-0010-2012 Document Control Author Name: Viswa Easwaran Position: Standards Engineer Document Owner Name:
More informationKENYA ELECTRICITY GENERATING COMPANY LTD
KENYA ELECTRICITY GENERATING COMPANY LTD TENDER No. KGN-HYD-014-2016 TENDER FOR REHABILITATION OF PROTECTION EQUIPMENT FOR MASINGA HYDRO POWER STATION 20/06/2016 ADDENDUM NO. 1 In accordance with the tender
More informationApplication for electricity connections Housing development for up to four dwellings
Electricity Thank you for considering Western Power Distribution for your electricity connections. We have put together these notes to help you fill out your and to ensure we receive all the correct information
More informationEDS EARTHING DESIGN CRITERIA, DATA AND CALCULATIONS
Document Number: EDS 06-0012 Network(s): Summary: ENGINEERING DESIGN STANDARD EDS 06-0012 EARTHING DESIGN CRITERIA, DATA AND CALCULATIONS EPN, LPN, SPN This standard is a companion document to the earthing
More informationIdentification and recording of 'hot' sites - joint procedure for Electricity Industry and Communications Network Providers
PRODUCED BY THE OPERATIONS DIRECTORATE OF ENERGY NETWORKS ASSOCIATION Engineering Recommendation S36 Identification and recording of 'hot' sites - joint procedure for Electricity Industry and Communications
More informationSerial Numbering Of Smart Type Electricity Meters From January 2013
Technical Recommendation M2 Version 1.3 Serial Numbering Of Smart Type Electricity Meters From January 2013 Version Status Date of Issue Reason for change Number 1.0 Superseded September 2012 Issued 1.1
More informationBulk Electric System Definition Reference Document
Bulk Electric System Definition Reference Document January, 2014 This draft reference document is posted for stakeholder comments prior to being finalized to support implementation of the Phase 2 Bulk
More informationThe updated EU energy efficiency standardisation of HV and MV transformers
INTERNATIONAL ENERGY EFFICIENT TRANSFORMERS WORKSHOP 2013 13TH NOVEMBER 2013 BANGKOK, THAILAND HELD IN CONJUNCTION WITH THE 42 ND MEETING OF THE APEC EGEE&C The updated EU energy efficiency standardisation
More informationCalculating and compensating for power transformer and cable (or line) losses - standard methods
Guidance Calculating and compensating for power transformer and cable (or line) losses - standard methods Foreword This guidance sets out basic standard methods for calculating electrical loss compensation
More informationSUBJECT HEADING: Switching Programmes ISSUE: 18
SUBJECT: Switchgear/Switching PROCEDURE: S04 SUBJECT HEADING: Switching Programmes ISSUE: 18 DATE: Apr 2017 1. INTRODUCTION 1.1 A written programme of switching operations shall be prepared. This programme
More informationG81 PART 1 FRAMEWORK APPENDIX
G81 PART 1 FRAMEWORK APPENDIX Housing Development design framework appendix to be read in conjunction with the latest version of: ENA Engineering Recommendation G81 Part 1 Framework for design and planning,
More informationSECTION - II BID DATA SHEET
SECTION - II BID DATA SHEET Kenya Power and Lighting Company II - 1 Contract: A36 SECTION -II BID DATA SHEET The following bid-specific data for the plant and equipment to be procured shall amend and/or
More informationConnection of Embedded Generating Plant up to 5MW
Engineering Recommendation No.3 of the Electricity Distribution Code Connection of Embedded Generating Plant up to 5MW Version 1.0 30th November 2005 Prepared by: Al Ain Distribution Company, Abu Dhabi
More informationTYPE APPROVAL PROCEDURE
Approval Amendment Record Approval Date Version Description 15/06/2012 1 Initial issue under MTM. Replaces Connex documents cml- 8.13-PR-002 & cml-8.21-po-168 30/11/2012 2 Document revised and updated
More informationVI 3 - i TABLE OF CONTENTS
VI 3 - i TABLE OF CONTENTS 3 PROJECT SPECIFIC DATA... 1 3.1 DEFINITIONS... 1 3.1.1 Design Data, High and Medium Voltage... 1 3.1.2 Design Data, Low Voltage Equipment... 2 3.1.3 Phase Relationship... 3
More informationCompany Directive STANDARD TECHNIQUE: SD1E/2. Technical Requirements for Customer Export Limiting Schemes
Company Directive STANDARD TECHNIQUE: SD1E/2 Technical Requirements for Customer Export Limiting Schemes Policy Summary This Standard Technique specifies the requirements for customer owned Export Limitation
More informationCustomer Connection Guide Updates Effective May 2017
This document provides a list of the updates to the EPCOR Distribution and Transmission Inc. (EDTI) Customer Connection Guide. If you have any questions, please contact EDTI Customer Engineering Services
More informationMV ELECTRICAL TRANSMISSION DESIGN AND CONSTRUCTION STANDARD. PART 1: GENERAL 1.01 Transformer
PART 1: GENERAL 1.01 Transformer A. This section includes liquid filled, pad mounted distribution transformers with primary voltage of 12kV or 4.16kV (The University will determine primary voltage), with
More informationENGINEERING STANDARD FOR INSTRUMENTS ELECTRICAL POWER SUPPLY AND DISTRIBUTION SYSTEMS FIRST EDITION MAY 2013
ENGINEERING STANDARD FOR INSTRUMENTS ELECTRICAL POWER SUPPLY AND DISTRIBUTION SYSTEMS FIRST EDITION MAY 2013 This Standard is the property of Iranian Ministry of Petroleum. All rights are reserved to the
More informationMESP TECHNICAL SPECIFICATION FOR AN ESSENTIAL SERVICES SUPPLY STEP UP TRANSFORMER
Engineering Specification TECHNICAL SPECIFICATION FOR AN ESSENTIAL Version: 3 Issued: 14 October 2016 Owner: Chief Engineer Approved By: Andrew Russack Head of Engineering - Electrical PRINTOUT MAY NOT
More information25kV A.C. Electrified Lines - Traction Bonding
Date:MAR 94 25kV A.C. Electrified Lines - Traction Page 1 of 6 Part A Synopsis This is issued by the to define the Boards requirements for continuity bonding on railway systems. This will ensure a continuous
More informationEDS SUBSTATION, NOMENCLATURE AND APPARATUS NAMING UP TO AND INCLUDING 132KV
ENGINEERING DESIGN STANDARD EDS 08-1113 SUBSTATION, NOMENCLATURE AND APPARATUS NAMING UP TO AND INCLUDING 132KV Network(s): Summary: EPN, LPN, SPN This engineering design standard sets out UK Power Networks
More informationMEDIUM VOLTAGE. For your projets where the low voltage is limited. 3200V 5500V 6600V Energy distribution
MEDIUM VOLTAGE For your projets where the low voltage is limited 3200V 5500V 6600V Energy distribution YOUR EXISTING CONSTRAINTS Example 1: FROM LV EXISTING ELECTRICAL SOURCES : Transport the LV to the
More informationELECTRICAL NETWORKS SPECIFICATION TECHNICAL SPECIFICATION FOR A 230V/110V AND 400V/110V TRANSFORMER
Approval Amendment Record Approval Date Version Description 03/05/2017 1 Initial issue PRINTOUT MAY NOT BE UP-TO-DATE; REFER TO METRO INTRANET FOR THE LATEST VERSION Page 1 of 13 Table of Contents 1. Purpose...
More informationProtection of Electrical Networks. Christophe Prévé
Protection of Electrical Networks Christophe Prévé This Page Intentionally Left Blank Protection of Electrical Networks This Page Intentionally Left Blank Protection of Electrical Networks Christophe Prévé
More informationEPR Fundamentals of Calculation of Earth Potential Rise in the Underground Power Distribution Cable Network by Ashok K.
EPR Fundamentals of Calculation of Earth Potential Rise in the Underground Power Distribution Cable Network by Ashok K. Parsotam (1997) available free from NZCCPTS website (companion paper to Cable Sheath
More informationTHIS IS AN UNCONTROLLED DOCUMENT, THE READER MUST CONFIRM ITS VALIDITY BEFORE USE. Contents
Document Number: EOS 09-0100a Contents 1 Introduction... 2 2 Cable Routes/Joints... 2 3 Cable Details... 2 4 Cable Warning Markers... 4 5 Cable Drum Numbers... 4 6 Ducts - Including those used in a Directional
More informationSERIES K: PROTECTION AGAINST INTERFERENCE
International Telecommunication Union ITU-T K.45 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (04/2008) SERIES K: PROTECTION AGAINST INTERFERENCE Resistibility of telecommunication equipment installed
More informationEDS GRID AND PRIMARY SUBSTATION EARTHING DESIGN
Document Number: EDS 06-0013 Network(s): Summary: ENGINEERING DESIGN STANDARD EDS 06-0013 GRID AND PRIMARY SUBSTATION EARTHING DESIGN EPN, LPN, SPN This standard details the earthing design requirements
More informationDESIGN PRACTICE NOTE DESIGN/REVIEW REQUIREMENTS FOR TRACTION BONDING PLAN
Approval Amendment Record Approval Date Version Description 01/04/2014 1 Initial Issue under MTM PRINTOUT MAY NOT BE UP-TO-DATE; REFER TO METRO INTRANET FOR THE LATEST VERSION Page 1 of 7 Table of Contents
More informationSDCS-03 DISTRIBUTION NETWORK GROUNDING CONSTRUCTION STANDARD (PART-I) UNDERGROUND NETWORK GROUNDING. Rev. 01
SDCS-03 DISTRIBUTION NETWORK GROUNDING CONSTRUCTION STANDARD (PART-I) UNDERGROUND NETWORK GROUNDING Rev. 01 This specification is property of SEC and subject to change or modification without any notice
More informationUniversity of Central Florida Main Campus. Electric. Service and Meter Installations Requirements. Issued January 26 th, 2017.
University of Central Florida Main Campus Electric Service and Meter Installations Requirements Issued January 26 th, 2017 1 P a g e Table of Contents 1. GENERAL INFORMATION... 3 2. DEFINITIONS... 3 3.
More informationOffice for Nuclear Regulation
Office for Nuclear Regulation ASSESSMENT REPORT Civil Nuclear Reactors Programme NNB Genco: Hinkley Point C Pre-Construction Safety Report 2012 Assessment Report for Work Stream B14, Radiation Protection
More informationTS RES - OUTSTANDING ISSUES
TS RES - OUTSTANDING ISSUES This document has been officially issued as DRAFT until the following outstanding issues have been resolved. At that time the document will be officially reissued as the next
More informationRevision 24 of Issue 3 of the Grid Code has been approved by the Authority for implementation on 19 th November 2007.
Our Ref: Your Ref: Date: November 2007 To: All Recipients of the Serviced Grid Code Regulatory Frameworks Electricity Codes National Grid Electricity Transmission plc National Grid House Warwick Technology
More informationDESIGN OF A 45 CIRCUIT DUCT BANK
DESIGN OF A 45 CIRCUIT DUCT BANK Mark COATES, ERA Technology Ltd, (UK), mark.coates@era.co.uk Liam G O SULLIVAN, EDF Energy Networks, (UK), liam.o sullivan@edfenergy.com ABSTRACT Bankside power station
More informationMESP TECHNICAL SPECIFICATION FOR AN AUXILIARY OR ESSENTIAL SERVICES AND AUXILIARY TRANSFORMER FOR USE IN A RAILWAY SUBSTATION
Engineering Specification Head of Electrical Engineering MESP 050100-01 TECHNICAL SPECIFICATION FOR AN AUXILIARY OR ESSENTIAL SERVICES AND AUXILIARY TRANSFORMER FOR USE IN A RAILWAY SUBSTATION Version:
More informationAS This is a free 6 page sample. Access the full version online. Australian Standard GAUGING OF METRIC SCREW THREADS
AS 1014 1986 Australian Standard GAUGING OF METRIC SCREW THREADS This Australian standard was prepared by Committee ME/28, Screw Threads. It was approved on behalf of the Council of the Standards Association
More informationTRANSMISSION ASSETS. Filed: September 12, 2006 EB Exhibit D1 Tab 1 Schedule 2 Page 1 of INTRODUCTION
Filed: September, 00 EB-00-00 Schedule Page of TRANSMISSION ASSETS.0 INTRODUCTION 0 Hydro One Networks Inc. is licensed by the Ontario Energy Board (OEB) to own, operate and maintain transmission facilities
More informationTHE USE OF A SAFETY CASE APPROACH TO SUPPORT DECISION MAKING IN DESIGN
THE USE OF A SAFETY CASE APPROACH TO SUPPORT DECISION MAKING IN DESIGN W.A.T. Alder and J. Perkins Binnie Black and Veatch, Redhill, UK In many of the high hazard industries the safety case and safety
More informationDMRC ELECTRICAL STANDARDS & DESIGN WING (DESDW)
DELHI METRO RAIL CORPORATION LIMITED DMRC ELECTRICAL STANDARDS & DESIGN WING (DESDW) SPECIFICATION NO. DMES- 0005/ DMRC-E-TR-TRANSF-05 SPECIFICATIONS FOR THREE PHASE 33 kv/415 V AUXILIARY Issued on: Date
More informationNational Grid s commitments when undertaking works in the UK. Our stakeholder, community and amenity policy
National Grid s commitments when undertaking works in the UK Our stakeholder, community and amenity policy Introduction This document describes the ten commitments we have made to the way we carry out
More informationNATS Swanwick. Interface Agreement. Owners: General Manager Swanwick. General Manager XXX
NATS Swanwick Interface Agreement between Swanwick And XXX Airport Owners: General Manager Swanwick General Manager XXX APPROVED BY Title Name Signature Date General Manager LTC Swanwick General Manager
More informationAnalogue Commercial Radio Licence: Format Change Request Form
Analogue Commercial Radio Licence: Format Change Request Form Date of request: 25 April 2017 Station Name: 99.9 Radio Norwich Licensed area and licence number: Norwich AL000300BA/2 Licensee: Celador Radio
More informationMETER - INSTALLATION Pad Mount Transformer
ER 1-210-C PAGE 1 OF 5 USE: Pad mount transformer secondary compartment LATEST REVISION: PREVIOUS REVISION 10-01-12 ORIGINATED 0-94 PREVIOUS NUMBER ER 700, 10-01-86 Added specification for placement and
More informationAPPENDIX D: DRAWING SUBMISSION STANDARDS
1.0 FIRST SUBMISSION CONCEPTUAL DESIGN Once the Developer has obtained approval for a Development Application where Park or Open Space improvements are required, a detailed Park or Open Space submission
More informationWESTERN POWER DISTRIBUTION
WESTERN POWER DISTRIBUTION Framework Document on cable recording techniques to be read in conjunction with other Western Power Distribution Framework Document Appendices relating to Housing and to Industrial
More informationRELEVANT ELECTRICAL STANDARDS
RELEVANT ELECTRICAL STANDARDS Issue 2 February 2014 National Grid 2014 No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means electronic,
More informationInformation Governance Policy
Information Governance Policy Target Audience Brief Description (max 50 words) Action Required Board members, sub-committee members and all staff working for, or on behalf of, the NEE CCG This policy outlines
More informationRELEVANT ELECTRICAL STANDARDS
RELEVANT ELECTRICAL STANDARDS Issue 2 October 2014 Issue 2 September 2014 National Grid 2014 2014 Copyright owned by National Grid Electricity Transmission plc, all rights reserved. No part of this publication
More informationReference Number PDS 04 (RIC Standard: EP SP)
Discipline Engineering Standard NSW Category Electrical Title Reference Number PDS 04 (RIC Standard: EP 12 10 00 10 SP) Document Control Status Date Prepared Reviewed Endorsed Approved Mar 05 Standards
More informationPower Quality Summary
Power Quality Summary This article provides an overview of how voltage harmonic distortion is managed on the distribution network and focuses on the current at future issues surround the connection of
More informationSPECIFICATION. Kilovoltage X-ray calibration system for protection and diagnostic level dosimetry. Prepared by
SPECIFICATION Kilovoltage X-ray Prepared by Igor Gomola, Technical Officer, Project ECU6023, Date 2015-Oct-06 Revision Date Status Comments 0.1 2015-Oct-06 Draft Igor Gomola Page 1 of 12 1. Scope This
More informationSouth African Distribution Code
South African Distribution Code Metering Code Version 6.0 July 2014 This document is approved by the National Energy Regulator of South Africa (NERSA) Issued by: RSA Grid Code Secretariat Contact: Mr.
More informationTitle Substation Auxiliary Transformer from Rectifier Transformer Secondary. Reference Number PDS 01 (RIC Standard: EP SP)
Discipline Engineering Standard NSW Category Electrical Title Substation Auxiliary Transformer from Rectifier Transformer Secondary Reference Number PDS 01 (RIC Standard: EP 05 00 00 01 SP) Document Control
More information500 kva Dry-type Isolation Transformer V-Delta to 208Y/120V 3PH - NEMA 1/Indoor
500 kva Dry-type Isolation Transformer - 13200V-Delta to 208Y/120V 3PH - NEMA 1/Indoor Part #: MT-DOE16-3P-13200D-500KVA-208Y.120-N1 Page: 1 The MT-DOE16-3P-13200D-500KVA-208Y.120-N1 Dry-type Isolation
More informationRoad signs Specifications
AS 1743:2018 AS 1743:2018 Road signs Specifications This Australian Standard was prepared by Committee MS-012, Road Signs and Traffic Signals. It was approved on behalf of the Council of Standards Australia
More informationATTACHMENT - AESO FUNCTIONAL SPECIFICATION
ATTACHMENT - AESO FUNCTIONAL SPECIFICATION Functional Specification Revision History Revision Description of Revision By Date D1 For internal Comments Yaoyu Huang January 8, 2018 D2 For external Comments
More informationStandard Prices for Generators 2010
Standard Prices for Generators 2010 Distribution System Operator ESB Networks Page 1 of 13 CONTENTS 1.0 Background...3 2.0 Standard Pricing Approach...3 Schedule of Charges for generators excluding VAT...6
More informationSIGN PERMIT CHECKLIST AND APPLICATION
CURRENT PLANNING DIVISION 410 E. 5 th Street Loveland, CO 80537 970-962-2523 eplan-planning@cityofloveland.org cityofloveland.org/dc SIGN PERMIT CHECKLIST AND APPLICATION FOR FREESTANDING AND WALL MOUNTED
More informationMERALCO Standards: Electrical Design. Engr. Eduard Mercado Electrical Design Team
MERALCO Standards: Electrical Design Engr. Eduard Mercado Electrical Design Team Electrical Design Standards SERVICE VOLTAGES SECONDARY METERED - 240 V, 400 V, 460 V PRIMARY METERING -34.5 kv, 13.8 kv
More informationAt its meeting on 18 May 2016, the Permanent Representatives Committee noted the unanimous agreement on the above conclusions.
Council of the European Union Brussels, 19 May 2016 (OR. en) 9008/16 NOTE CULT 42 AUDIO 61 DIGIT 52 TELECOM 83 PI 58 From: Permanent Representatives Committee (Part 1) To: Council No. prev. doc.: 8460/16
More informationLIMITS FOR TEMPORARY OVERVOLTAGES IN ENGLAND AND WALES NETWORK
LIMITS FOR TEMPORARY OEROLTAGES IN ENGLAND AND WALES NETWORK This document is for internal and contract specific use only. Disclaimer NGG and NGET or their agents, servants or contractors do not accept
More informationMinnesota Rules, Chapter 4732 X-ray Revision
Minnesota Rules, Chapter 4732 X-ray Revision DRAFT INDUSTRIAL X-RAY SYSTEMS DEFINTIONS, 1.0 4732.####. INDUSTRIAL X-RAY SYSTEMS DEFINITIONS. Subpart 1. Scope. For purposes of industrial x-ray systems under
More informationAirwave Service Government Security Classifications Guidance
Airwave Service Government Security Classifications Guidance Author: John Stark, Head of Communications Security Home Office Airwave Management Team john.stark@homeoffice.gsi.gov.uk 07718 805804 Enquiries:
More information