DISTRIBUTION DESIGN CATALOGUE
|
|
|
- Ethan Dennis
- 5 years ago
- Views:
Transcription
1 DISTRIBUTION DESIGN CATALOGUE Section 15 LM Low Voltage Metering HPC-1DC For application to Horizon Power Electricity Distribution Networks
2 Document Control Author Name: Paul Savig Position: Senior Standards Engineer Document Owner (May also be the Process Owner) Name: Position: Justin Murphy Manager Asset Management Services Approved By * Name: Justin Murphy Position: Manager Asset Management Services Date Created/Last Updated January 2014 Review Frequency ** Annually Next Review Date ** January 2015 * Shall be the Process Owner and is the person assigned authority and responsibility for managing the whole process, end-to-end, which may extend across more than one division and/or functions, in order to deliver agreed business results. ** Frequency period is dependent upon circumstances maximum is 5 years from last issue, review, or revision whichever is the latest. If left blank, the default shall be 1 year unless otherwise specified. Revision Control Revision Date Description 1 01/07/2009 Original Horizon Power issue 2 21/01/2014 Minor Stock Code and Drawing revisions STAKEHOLDERS The following positions shall be consulted if an update or review is required: District Managers Manager Asset Management Services NOTIFICATION LIST The following positions shall be notified of any authorised change: Project Director, Major Projects Project Director, Engineering & Project Services All Other Key Groups outside of Operations Document Title: Distribution Design Catalogue Page 2 of 13 Issue Date: 22/01/2014
3 LOW VOLTAGE METERING LIST LM1 LM2_A LM2_B LM3_A LM3_B LM3_C LM4_A LM4_B LM4_C DESCRIPTION Polyphase HV CT Polyphase HV & LV CT Polyphase LV CT Polyphase Direct Connect Credit or Prepaid Polyphase Direct Connect Credit Polyphase Direct Connect Prepaid (being superseded) Single Phase Credit or Prepaid Single Phase Credit (refurbished) Single Phase Credit (old stock) Notes 1 Screws required for meter - one ABH0512 for the top and two ABH0520 for the sides 2 Screws required for meter - one ABH0512 for the top and two ABH0532 for the sides Document Title: Distribution Design Catalogue Page 3 of 13 Issue Date: 22/01/2014
4 Document Title: Distribution Design Catalogue Page 4 of 13 Issue Date: 22/01/2014
5 Document Title: Distribution Design Catalogue Page 5 of 13 Issue Date: 22/01/2014
6 LM1 DESCRIPTION Polyphase HV CT 1 JW2056 Meter, Watthour EM5300 Landis & Gyr 3ph CT 1 ea Note 1 Document Title: Distribution Design Catalogue Page 6 of 13 Issue Date: 22/01/2014
7 Document Title: Distribution Design Catalogue Page 7 of 13 Issue Date: 22/01/2014
8 DESCRIPTION LM2_A Polyphase HV & LV CT 1 JW2056 Meter, Watthour EM5300 Landis & Gyr 3ph CT 1 ea Note 1 DESCRIPTION LM2_B Polyphase LV CT 1 JW2061 Meter, Watthour Eister 3ph CT 1 ea Note 1 Document Title: Distribution Design Catalogue Page 8 of 13 Issue Date: 22/01/2014
9 Document Title: Distribution Design Catalogue Page 9 of 13 Issue Date: 22/01/2014
10 DESCRIPTION LM3_A Polyphase Direct Connect Credit or Prepaid 1 JWH3081 Meter, Watthour AMI Landis & Gyr 3ph direct 1 ea Note 2 DESCRIPTION LM3_B Polyphase Direct Connect - Credit 1 JW2059 Meter, Watthour Eister 3ph direct 1 ea Note 2 DESCRIPTION LM3_C Polyphase Direct Connect Prepaid (being superseded) 1 JW2049 Meter, Watthour Prepayment 3ph direct Amps 1 ea Note 2 Document Title: Distribution Design Catalogue Page 10 of 13 Issue Date: 22/01/2014
11 Document Title: Distribution Design Catalogue Page 11 of 13 Issue Date: 22/01/2014
12 DESCRIPTION LM4_A Single Phase Credit or Prepaid 1 JWH3071 Meter, Watthour AMI Landis & Gyr 1ph direct 1 ea Note 1 DESCRIPTION LM4_B Single Phase Credit (refurbished) 1 JWR2060 Meter, Watthour Eister 1ph direct (refurbished) 1 ea Note 1 DESCRIPTION LM4_C Single Phase Credit (old stock) 1 JW2060 Meter, Watthour Eister 1ph direct 1 ea Note 1 Document Title: Distribution Design Catalogue Page 12 of 13 Issue Date: 22/01/2014
13 APPENDIX A REVISION INFORMATION (Informative) Horizon Power has endeavoured to provide standards of the highest quality and would appreciate notification if any errors are found or even queries raised. Each Standard makes use of its own comment sheet which is maintained throughout the life of the standard, which lists all comments made by stakeholders regarding the standard. The document HPC-1DC COMM can be used to record any errors or queries found in or pertaining to this standard, which can then be addressed whenever the standard gets reviewed. Date Rev No. Notes 0 Western Power Supplied 01/07/ Original Horizon Power issue 21/01/ LM Index Drawing added LM1 to LM3 Drawing changed to LM1 LM2, LM3, LM4 & LM5 Drawings added LM2, LM3, LM4 & LM5 Lists added Document Title: Distribution Design Catalogue Page 13 of 13 Issue Date: 22/01/2014
WITHDRAWN JULY Manual: Distribution Substation Manual (DSM) Section I: Introduction
Manual: Distribution Substation Manual (DSM) Section I: Introduction Standard Number: HPC-5DA-07-0010-2012 Document Control Author Name: Viswa Easwaran Position: Standards Engineer Document Owner Name:
Manual: Distribution Substation Manual (DSM) Section D: Substation Drawing Revision List
Manual: Distribution Substation Manual (DSM) Section D: Substation Drawing Revision List Standard Number: HPC-5DA-07-0011-2012 Document Control Author Name: Viswa Easwaran Position: Standards Engineer
Serial Numbering Of Smart Type Electricity Meters From January 2013
Technical Recommendation M2 Version 1.3 Serial Numbering Of Smart Type Electricity Meters From January 2013 Version Status Date of Issue Reason for change Number 1.0 Superseded September 2012 Issued 1.1
EDS LV ELECTRICAL SERVICE DRAWINGS
Document Number: EDS 08-2110 Network(s): Summary: ENGINEERING DESIGN STANDARD EDS 08-2110 LV ELECTRICAL SERVICE DRAWINGS EPN, LPN, SPN This standard details the drawings for service positions and connection
Australian Standard. Electricity metering equipment (AC) Particular requirements
AS 62053.21 2005 AS 62053.21 2005 Australian Standard Electricity metering equipment (AC) Particular requirements Part 21: Static meters for active energy (classes 1 and 2) (IEC 62053-21, Ed.1.0 (2003)
AS This is a free 6 page sample. Access the full version online. Australian Standard GAUGING OF METRIC SCREW THREADS
AS 1014 1986 Australian Standard GAUGING OF METRIC SCREW THREADS This Australian standard was prepared by Committee ME/28, Screw Threads. It was approved on behalf of the Council of the Standards Association
ECP HV METERING EQUIPMENT COMMISSIONING PROCEDURE
THIS IS AN UNCONTROLLED DOCUMENT, THE READER MUST CONFIRM ITS VALIDITY BEFORE USE Document Number: ECP 11-0515 ENGINEERING COMMISSIONING PROCEDURE ECP 11-0515 HV METERING EQUIPMENT COMMISSIONING PROCEDURE
NAUTICUS CLASS NOTATIONS
RULES FOR CLASSIFICATION OF SHIPS SHIPS IN OPERATION PART 7 CHAPTER 7 NAUTICUS CLASS NOTATIONS JANUARY 2003 CONTENTS PAGE Sec. 1 General... 5 Sec. 2 Scope of the Rules... 6 Sec. 3 Assignment of Class...
For the purposes of this document, the Engineering Consultant shall be referred to as the Engineer.
SPEC-0002 1/8 1.0 PURPOSE This specification describes the requirements and procedure for requesting new drawing numbers, requesting drawing files for revision, and submitting drawings for archiving. This
HPC-9DJ
Manual: Distribution Design Manual Volume 1 Quality of Electricity Supply Standard Number: HPC-5DC-07-0001-2012 Document Control Author Name: Anthony Seneviratne Position: Senior Standards Engineer Document
Company Directive POLICY DOCUMENT: SD4/7. Relating to 11kV and 6.6kV System Design
Company Directive POLICY DOCUMENT: SD4/7 Relating to 11kV and 6.6kV System Design Policy Summary This document describes the standard requirements for the design of the 11kV and 6.6kV systems. Reference
EDS LV WAVEFORM MAINS CABLE RATINGS
Document Number: EDS 02-0033 Network(s): Summary: ENGINEERING DESIGN STANDARD EDS 02-0033 LV WAVEFORM MAINS CABLE RATINGS EPN, LPN, SPN This standard details the technical and practical information required
VAR Generator Operation for Maintaining Network Voltage Schedules
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
TECHNICAL MEMORANDUM
TECHNICAL MEMORANDUM Design Submittal and Review Protocol In-progress and Draft 15% Design Submittals TM 0.7 Prepared by: Signed document on file 4 Jun 2009 Ken Jong, PE, Engineering Manager Date Checked
Company Directive STANDARD TECHNIQUE: TP6F/1. Power Measurement Conventions
Company Directive STANDARD TECHNIQUE: TP6F/1 Power Measurement Conventions Summary This document specifies the conventions that are used for the direction of Power Flow within Western Power Distribution
ECP COMPACT AND MICRO SUBSTATION COMMISSIONING PROCEDURE
Network(s): Summary: ENGINEERING COMMISSIONING PROCEDURE ECP 11-0507 COMPACT AND MICRO SUBSTATION COMMISSIONING PROCEDURE EPN, LPN, SPN This procedure details the testing and commissioning procedures for
Company Directive STANDARD TECHNIQUE: TP14C. Distribution Business Provided Metering Facilities
Company Directive STANDARD TECHNIQUE: TP14C Distribution Business Provided Metering Facilities Summary This standard technique document details the metering facilities to be provided by the distribution
THE PLANNING PROCEDURE FOR HF BROADCASTING - ARTICLE 12 OF THE RADIO REGULATIONS
THE PLANNING PROCEDURE FOR HF BROADCASTING - ARTICLE 12 OF THE RADIO REGULATIONS Nedialko Miltchev Radiocommunication Bureau 1 Introduction The current procedures for the use of the HF bands allocated
Standard VAR Voltage and Reactive Control
A. Introduction 1. Title: Voltage and Reactive Control 2. Number: VAR-001-3 3. Purpose: To ensure that voltage levels, reactive flows, and reactive resources are monitored, controlled, and maintained within
SATELLITE NETWORK NOTIFICATION AND COORDINATION REGULATIONS 2007 BR 94/2007
BR 94/2007 TELECOMMUNICATIONS ACT 1986 1986 : 35 SATELLITE NETWORK NOTIFICATION AND COORDINATION ARRANGEMENT OF REGULATIONS 1 Citation 2 Interpretation 3 Purpose 4 Requirement for licence 5 Submission
50-SDMS-01 SPECIFICATIONS FOR
SPECIFICATIONS FOR CURRENT TRANSFORMERS UP TO 36 KV This specification is property of SEC and subject to change or modification without any notice C O N T E N T S CLAUSE TITLE PAGE NO. ------------ --------
Devizes Rotary Young Photographer Information Pack
Introduction The Rotary International in Britain and Ireland (RIBI) Young Photographer Competition is a successful, wellestablished and competition. Its aim is to support and encourage young people to:
ENGINEERING DRAWINGS MANAGEMENT POLICY (IFC/AS BUILTS)
Approval Amendment Record Approval Date Version Description 15/10/2015 1 This policy takes precedence over L1-NAM-PRO-003 Infrastructure As Built Drawing Management due to business restructures. New Content
Company Directive STANDARD TECHNIQUE: SD1E/2. Technical Requirements for Customer Export Limiting Schemes
Company Directive STANDARD TECHNIQUE: SD1E/2 Technical Requirements for Customer Export Limiting Schemes Policy Summary This Standard Technique specifies the requirements for customer owned Export Limitation
ECP DISTRIBUTION TRANSFORMER COMMISSIONING PROCEDURE
Document Number: ECP 11-0506 ENGINEERING COMMISSIONING PROCEDURE ECP 11-0506 DISTRIBUTION TRANSFORMER COMMISSIONING PROCEDURE Network(s): Summary: EPN, LPN, SPN This procedure details the testing and commissioning
Earthing Requirements for HV Transmission Structures
Engineering Standard Electrical MEST 000002-07 Earthing Requirements for Transmission Structures Version: 1 Issued: February 2015 Owner: Engineering Approved By: Patrick Kelly Head of Electrical Engineering
Standard Development Timeline
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard is adopted by the NERC Board of Trustees (Board).
METER - INSTALLATION Pad Mount Transformer
ER 1-210-C PAGE 1 OF 5 USE: Pad mount transformer secondary compartment LATEST REVISION: PREVIOUS REVISION 10-01-12 ORIGINATED 0-94 PREVIOUS NUMBER ER 700, 10-01-86 Added specification for placement and
ECP HV INSULATION TESTING
Document Number: ECP 11-0006 Network(s): Summary: All ENGINEERING COMMISSIONING PROCEDURE ECP 11-0006 HV INSULATION TESTING This standard details the policy for the on-site insulation testing of new and
Power Verification in Racks B and B950-02
Table of Contents 1.0 Introduction... 1 2.0 Accountability... 1 3.0 Hazards Internal to this Rack... 2 4.0 External Hazards Due to Sources in this Rack... 2 5.0 Battery Charger 120 VAC Verification...
THE GRID CODE OC7.5 INTEGRAL EQUIPMENT TESTS GUIDANCE NOTES
THE GRID CODE OC7.5 INTEGRAL EQUIPMENT TESTS GUIDANCE NOTES Issue 9: May 2013 National Grid National Grid Registered Office National Grid Electricity Transmission plc Registered Office: 1-3 Strand London
0MPV 8016 S00 / 0MPV 5016 S00 Prototype Manual
0MPV 8016 S00 / 0MPV 5016 S00 Prototype Manual November 2016 Version 1.0 1 Contents 1 Specifications... 3 2 General remarks... 3 3 Connectors / Interface... 4 3.1 Combined Power & Sense Connector Pin Assignment
CHIEF ENGINEER PROCEDURE MANAGEMENT OF OVERLAPPING DESIGN AGREEMENT
Approval Amendment Record Approval Date Version Description 30/05/2014 1 Initial issue under MTM. This procedure supersedes the Overlapping Design Agreement, Application and Transfer Log documents L2-SIG-PRO-007,
THE GRID CODE OC7.5 INTEGRAL EQUIPMENT TESTS
THE GRID CODE OC7.5 INTEGRAL EQUIPMENT TESTS GUIDANCE NOTES Issue 11: February 2018 National Grid Registered Office National Grid Electricity Transmission plc Registered Office: 1-3 Strand London WC2N
Standard VAR-002-2b(X) Generator Operation for Maintaining Network Voltage Schedules. 45-day Formal Comment Period with Initial Ballot June July 2014
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
EDS LV SUPPLIES TO MOBILE PHONE BASE STATIONS MOUNTED ON TRANSMISSION TOWERS
ENGINEERING DESIGN STANDARD EDS 08-2109 LV SUPPLIES TO MOBILE PHONE BASE STATIONS MOUNTED ON TRANSMISSION TOWERS Network(s): Summary: EPN, LPN, SPN This standard provides guidance on the installation of
Company Directive STANDARD TECHNIQUE: SD5F. Relating to connecting multiple small low voltage connections with limited network analysis
Company Directive STANDARD TECHNIQUE: SD5F Relating to connecting multiple small low voltage connections with limited network analysis Policy Summary This document specifies the procedure for connecting
ECP GROUND-MOUNTED SWITCHGEAR WITH PROTECTION RELAYS COMMISSIONING PROCEDURE
ENGINEERING COMMISSIONING PROCEDURE ECP 11-0512 GROUND-MOUNTED SWITCHGEAR WITH PROTECTION RELAYS COMMISSIONING PROCEDURE Network(s): Summary: EPN, LPN, SPN This procedure details the testing and commissioning
Standard BAL Frequency Response and Frequency Bias Setting
A. Introduction Title: and Frequency Bias Setting Number: BAL-003-1 Purpose: To require sufficient from the Balancing (BA) to maintain Interconnection Frequency within predefined bounds by arresting frequency
Standard VAR-002-2b(X) Generator Operation for Maintaining Network Voltage Schedules
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
MFJ ENTERPRISES, INC.
Model MFJ-2911 INSTRUCTION MANUAL CAUTION: Read All Instructions Before Operating Equipment MFJ ENTERPRISES, INC. 300 Industrial Park Road Starkville, MS 39759 USA Tel: 662-323-5869 Fax: 662-323-6551 VERSION
Standard VAR-002-2b(X) Generator Operation for Maintaining Network Voltage Schedules
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
American National Standard. Physical Aspects of Watthour Meters Safety Standard. ANSI C Revision of ANSI C
Revision of ANSI C12.10-2004 American National Standard Physical Aspects of Watthour Meters Safety Standard Secretariat: National Electrical Manufacturers Association Approved June 28, 2011 American National
Single-Phase Mini Pad-Mounted Transformer Specification: Energy+ MPDL
Single-Phase Mini Pad-Mounted Transformer Specification: Energy+ MPDL Issued by: Approved by: Engineering Department Energy+ Inc. September 2016 Shawn Jackson, P.Eng. Approval is given in accordance with
UNITED STATES OF AMERICA BEFORE THE FEDERAL ENERGY REGULATORY COMMISSION ) )
UNITED STATES OF AMERICA BEFORE THE FEDERAL ENERGY REGULATORY COMMISSION North American Electric Reliability Corporation ) ) Docket No. PETITION OF THE NORTH AMERICAN ELECTRIC RELIABILITY CORPORATION FOR
MFJ ENTERPRISES, INC.
Model MFJ-2912 INSTRUCTION MANUAL CAUTION: Read All Instructions Before Operating Equipment MFJ ENTERPRISES, INC. 300 Industrial Park Road Starkville, MS 39759 USA Tel: 662-323-5869 Fax: 662-323-6551 VERSION
NATS Swanwick. Interface Agreement. Owners: General Manager Swanwick. General Manager XXX
NATS Swanwick Interface Agreement between Swanwick And XXX Airport Owners: General Manager Swanwick General Manager XXX APPROVED BY Title Name Signature Date General Manager LTC Swanwick General Manager
MFJ ENTERPRISES, INC.
Radio Interface Model MFJ-5124K/Y INSTRUCTION MANUAL CAUTION: Read All Instructions Before Operating Equipment! MFJ ENTERPRISES, INC. 300 Industrial Park Road Starkville, MS 39759 USA Tel: 662-323-5869
ELECTRIC NETWORK DESIGN APPROVAL APPLICATION
Please complete all sections of the application form and return to newconnections@ukpowerdistribution.co.uk Section 1 Site Details UKPD Reference Number: Energisation Date: Site Name/Address/Postcode:
Card Management. Chapter 7. 4/21/2014 Chapter 7 - Page 1. Copyright University of Pittsburgh. All rights reserved.
Chapter 7 4/21/2014 Chapter 7 - Page 1 Section Objectives At the end of this section, you should be able to: Request cards Accept cards Assign cards Return cards Reclaim cards View card details 4/21/2014
SAN FRANCISCO EMERGENCY MEDICAL SERVICES AGENCY EMS COMMUNICATIONS EQUIPMENT AND PROCEDURES
I. PURPOSE SAN FRANCISCO EMERGENCY MEDICAL SERVICES AGENCY Policy Reference No.: 3010 Review Date: January 1, 2011 Supersedes: June 1, 2004 EMS COMMUNICATIONS EQUIPMENT AND PROCEDURES A. To prescribe and
ECP GROUND-MOUNTED SWITCHGEAR COMMISSIONING PROCEDURE
Document Number: ECP 11-0511 Network(s): Summary: ENGINEERING COMMISSIONING PROCEDURE ECP 11-0511 GROUND-MOUNTED SWITCHGEAR COMMISSIONING PROCEDURE EPN, LPN, SPN This procedure details the testing and
generation greater than 75 MVA (gross aggregate nameplate rating) Generation in the ERCOT Interconnection with the following characteristics:
A. Introduction 1. Title: Verification of Models and Data for Turbine/Governor and Load Control or Active Power/Frequency Control Functions 2. Number: MOD-027-1 3. Purpose: To verify that the turbine/governor
Australian Standard. Electricity metering equipment (AC) Particular requirements. Part 22: Static meters for active energy (classes 0.2 S and 0.
AS 62053.22 2005 IEC 62053-22, Ed.1.0 (2003) AS 62053.22 2005 Australian Standard Electricity metering equipment (AC) Particular requirements Part 22: Static meters for active energy (classes 0.2 S and
UPDATES to the. Rules of Procedure. (Edition of 1998) approved by the Radio Regulations Board. Contents
UPDATES to the Rules of Procedure (Edition of 1998) approved by the Radio Regulations Board Revision (1) (Circular No.) Date Part ARS Pages to be removed Pages to be inserted 1 June 1999 A1 ARS5 15-18
ECP HV INSULATION TESTING
Document Number: ECP 11-0006 Network(s): Summary: ENGINEERING COMMISSIONING PROCEDURE EPN, LPN, SPN ECP 11-0006 HV INSULATION TESTING This standard details the policy for the on-site insulation testing
Electrical Procedure No E032. Procedure No: ELE 032
Procedure No: ELE 032 Procedure Title: Date of Procedure: Responsible Person(s) Safety Isolation of Low Voltage Networks and Systems for work to be carried out by third parties. i.e. Non University personnel.
Australian/New Zealand Standard
AS/NZS 60076.5:2012 AS/NZS 60076.5:2012 Australian/New Zealand Standard Power transformers Part 5: Ability to withstand short circuit (IEC 60076-5, Ed. 3.0 (2006) MOD) AS/NZS 60076.5:2012 This Joint Australian/New
Earthing, HV Switching and Associated Operational Equipment. Approval: Chief Operating Officer
ACCESS PRACTICE AP 24 Earthing, HV Switching and Associated Operational Equipment Process Authority: Manager Operations Improvement Approval: Chief Operating Officer Version Date: 27/08/2013 Revision:
VAR Generator Operation for Maintaining Network Voltage Schedules
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
1.1.1 Apologies were received from Nick Atkinson, Vaughan C. Matthews, David Foley and Peter Christian.
Minutes Meeting of the Haringey Audit Committee 24 May 2013 at 10:00am Hornsey Central Present: Caroline Rivett CR Chair, Governing Body Lay Member Dr Sherry Tang STa GP Governing Body Member, Central
LM217, LM V to 37 V adjustable voltage regulators. Datasheet. Features. Description
Datasheet 1.2 V to 37 V adjustable voltage regulators TO-220 TO-220FP Features Output voltage range: 1.2 to 37 V Output current in excess of 1.5 A 0.1% line and load regulation Floating operation for high
Australian/New Zealand Standard
AS/NZS IEC 61935.1:2006 IEC 61935-1:2005 AS/NZS IEC 61935.1:2006 Australian/New Zealand Standard Testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 1: Installed cabling AS/NZS
EDS GRID AND PRIMARY SUBSTATION CIVIL DESIGN STANDARDS
Document Number: EDS 07-0105 ENGINEERING DESIGN STANDARD EDS 07-0105 GRID AND PRIMARY SUBSTATION CIVIL DESIGN STANDARDS Network(s): Summary: EPN, LPN, SPN This design standard details the current civil
Category: ELECTRICITY Requirement: EL-ENG Page: 1 of 13. Document(s): S-E-01, S-E-04 Issue Date: Effective Date:
Requirements for Certification Category: ELECTRICITY Requirement: EL-ENG-11-02 Page: 1 of 13 Requirements for Certification and Use of Portable Measuring Apparatus for Reverification and Dispute Meter
Australian Standard. Unified (ISO inch) screw threads, associated gauges, and gauging practice AS
AS 3635 1990 Australian Standard Unified (ISO inch) screw threads, associated gauges, and gauging practice This Australian Standard was prepared by Committee ME/28, Screw Threads. It was approved on behalf
The MFJ-1754 can be mounted on any 1" to 1 1/2" mast (conductive or non conductive.)
INTRODUCTION: The MFJ-1754 is designed for use on the 2 meter and the 70 centimeter bands. On the 2 meter band the MFJ-1754 behaves as a vertical 1/4 wave antenna, however on 70 centimeter band the MFJ-1754
BC145 SIGNAL ISOLATOR BOARD
BC145 SIGNAL ISOLATOR BOARD 4/17 Installation & Operating Manual MN1373 Any trademarks used in this manual are the property of their respective owners. Important: Be sure to check www.baldor.com to download
Community College of Allegheny County Unit 8 Page #1. Op-Amps
Community College of Allegheny County Unit 8 Page #1 Op-s "You will say that I am always conjuring up awful difficulties & consequences my answer to this is it is an important part of the duty of an engineer"
Author Instructions FPIN Editorial Manager
Author Instructions FPIN Editorial Manager Login Information: www.editorialmanager.com/fpin Your username and password will have been sent to you by the FPIN Project Manager. If you do not have it, please
SK-PW7 Servo. Power Bus. User Manual and Setup Guide. Rev 3.00 SK-PW7 User Manual & Setup Guide
SK-PW7 Servo Power Bus User Manual and Setup Guide Rev 3.00 SK-PW7 User Manual & Setup Guide Table of Contents 1 Introduction...4 2 Package Contents...5 3 Safety...6 4 Principle of Operation...7 5 Connections...8
Allocating Charges in WORKS
Allocating Charges in WORKS Key points of Allocating in Works Allocation is the process by which the UD accounting chartfields (e.g. Purpose, Account, Project ID, etc.) get assigned to credit card charges.
Voltage and Reactive Procedures CMP-VAR-01
Voltage and Reactive Procedures CMP-VAR-01 NERC Standards: VAR-001-2 VAR-002-1.1b Effective Date: 07/31/2012 Document Information Current Revision 2.0 Review Cycle Annual Subject to External Audit? Yes
TECHNICAL MANUAL CALIBRATION PROCEDURE FOR HIGH VOLTAGE INSTRUMENTS
TECHNICAL MANUAL CALIBRATION PROCEDURE FOR HIGH VOLTAGE INSTRUMENTS Distribution Statement - Distribution authorized to U. S. Government agencies and their contractors for official use or for administrative
Australian/New Zealand Standard
AS/NZS 2451:1998 Australian/New Zealand Standard Bolts, screws and nuts with British Standard Whitworth threads (rationalized series) AS/NZS 2451:1998 This Joint Australian/New Zealand Standard was prepared
Revision 24 of Issue 3 of the Grid Code has been approved by the Authority for implementation on 19 th November 2007.
Our Ref: Your Ref: Date: November 2007 To: All Recipients of the Serviced Grid Code Regulatory Frameworks Electricity Codes National Grid Electricity Transmission plc National Grid House Warwick Technology
Connection of Embedded Generating Plant up to 5MW
Engineering Recommendation No.3 of the Electricity Distribution Code Connection of Embedded Generating Plant up to 5MW Version 1.0 30th November 2005 Prepared by: Al Ain Distribution Company, Abu Dhabi
AMERITRON RCS-12 AUTOMATIC ANTENNA SWITCH
AMERITRON RCS-12 AUTOMATIC ANTENNA SWITCH INSTRUCTION MANUAL PLEASE READ THIS MANUAL BEFORE OPERATING THIS EQUIPMENT! 116 Willow Road Starkville, MS 39759 USA 662-323-8211 Version 3B Printed in U.S.A.
Australian/New Zealand Standard
AS/NZS 4677:2010 AS/NZS 4677:2010 Australian/New Zealand Standard Steel utility services poles AS/NZS 4677:2010 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee CE-019,
VAR Voltage and Reactive Control
VAR-001-4 Voltage and Reactive Control A. Introduction 1. Title: Voltage and Reactive Control 2. Number: VAR-001-4 3. Purpose: To ensure that voltage levels, reactive flows, and reactive resources are
A. Introduction. VAR Voltage and Reactive Control
A. Introduction 1. Title: Voltage and Reactive Control 2. Number: VAR-001-4.2 3. Purpose: To ensure that voltage levels, reactive flows, and reactive resources are monitored, controlled, and maintained
UK Interface Requirement 2044
UK Interface Requirement 2044 Business Radio Land Mobile Services, covering Business Radio (Area Defined), Business Radio (Technically Assigned) and Business Radio (Light Licence) Authorisations Published:
VAR Voltage and Reactive Control. A. Introduction
VAR-001-5 Voltage and Reactive Control A. Introduction 1. Title: Voltage and Reactive Control 2. Number: VAR-001-5 3. Purpose: To ensure that voltage levels, reactive flows, and reactive resources are
POLICY
POLICY http://www.wi-repeaters.org March 18, 2017 I. Preamble: WISCONSIN ASSOCIATION OF REPEATERS, INC. Wisconsin Association of Repeaters, Inc. is a Wisconsin Non-Stock Corporation (WAR, Inc. or WAR)
1 Document history Version Date Comments
V1.4 Contents 1 Document history... 2 2 What is TourneyKeeper?... 3 3 Creating your username and password... 4 4 Creating a tournament... 5 5 Editing a tournament... 8 6 Adding players to a tournament...
2. As such, Proponents of Antenna Systems do not require permitting of any kind from the Town.
Subject: Antenna Systems Policy Number: Date Developed: 2008/09 Date Approved: April 8, 2009 Lead Department: Planning and Development Date Modified: (if applicable) November 26, 2014 A. PROTOCOL STATEMENT:
DocuSign Setup Admin. DocuSign User Setup Process Overview. Setting up a new DocuSign user
DocuSign Setup Admin DocuSign User Setup Process Overview 1) CORE-CT Security receives request to set up new supplier contract document creator 2) CORE-CT security team sets up Roles for the User 3) DocuSign
Southeastern Meter School & Conference
Southeastern Meter School & Conference The Hotel at Auburn University and Dixon Conference Center Auburn, Alabama March 20 th - 23 rd, 2017 Sponsored by the Southeastern Meter Technical Association In
Australian/New Zealand Standard
AS/NZS 1167.2:1999 Australian/New Zealand Standard Welding and brazing Filler metals Part 2: Filler metal for welding AS/NZS 1167.2:1999 This Joint Australian/New Zealand Standard was prepared by Joint
TRAFFIC ENGINEERING DIVISION
VIRGINIA DEPARTMENT OF TRANSPORTATION TRAFFIC ENGINEERING DIVISION MEMORANDUM GENERAL SUBJECT: Radio Systems/Highway Signs SPECIFIC SUBJECT: Use of Radio Systems by VDOT & Localities: HAR and TIS Informational
Measurement of Signalling Distances
Division / Business Unit: Function: Document Type: Enterprise Services Signalling Standard Measurement of Signalling Distances Applicability ARTC Network Wide SMS Publication Requirement Internal / External
WP197 Capacity Market Metering Test
WP197 Capacity Market Metering Test EMRS Working Practice Public Version: 4.0 Date: 20 July 2018 Table of Contents Change Amendment Record 4 1. Introduction 5 1.1 Scope and Purpose 5 1.2 Main Users and
LM4041. Precision micropower shunt voltage reference. Description. Features. Applications
Precision micropower shunt voltage reference Description Datasheet - production data SOT23-3L Features SOT323-5L Fixed 1.225 V typical output voltage Ultra low operating current: 40 µa at 25 C High precision:
INSTALLATION INSTRUCTION SHEET MPG-1 Metering Pulse Generator
Output Status LEDs Dip Switch Communication Status LEDs INSTALLATION INSTRUCTION SHEET MPG-1 Metering Pulse Generator Y Z S1 OUTPUT 1 PULSE VALUE OUTPUT MODE OUTPUT PULSE WIDTH (ms) 2 3 4 5 6 Outputs Z1
Renewal of EC Design-Examination and Type-Examination Certificates
Recommendation Chapter: 2.5.1 Conformity assessment procedures; General rules Text: Key words: AIMD Article 9.8 Decisions taken by the notified bodies in accordance with Annexes II and III shall be valid
UNIFORM NETWORK CODE OFFTAKE ARRANGEMENTS DOCUMENT SECTION E TELEMETRY, ETC
1 General 1.1 Introduction Joint Office of Gas Transporters UNIFORM NETWORK CODE OFFTAKE ARRANGEMENTS DOCUMENT 1.1.1 This Section E sets out: SECTION E TELEMETRY, ETC National Grid NTS' requirements for
Australian/New Zealand Standard
AS/NZS 4114.2 Australian/New Zealand Standard Spray painting booths, designated spray painting areas and paint mixing rooms Part 2: Installation and maintenance This Joint Australian/New Zealand Standard
EDS KV TRIPLEX CABLE RATING
Document Number: EDS 02-0027 Network(s): Summary: EPN, LPN, SPN ENGINEERING DESIGN STANDARD EDS 02-0027 11KV TRIPLEX CABLE RATING This engineering design standard provides the cable ratings and important
ETSI EN V1.3.1 ( )
EN 301 489-2 V1.3.1 (2002-08) Candidate Harmonized European Standard (Telecommunications series) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard
MFJ ENTERPRISES, INC.
Radio Interface Model MFJ-5124K/Y INSTRUCTION MANUAL CAUTION: Read All Instructions Before Operating Equipment! MFJ ENTERPRISES, INC. 300 Industrial Park Road Starkville, MS 39759 USA Tel: 662-323-5869