Reliable and proven Roller Followers series!

Size: px
Start display at page:

Download "Reliable and proven Roller Followers series!"

Transcription

1 olle Followes Ientifiction Numbe n Specifiction Exmple of n Ientifiction Numbe Sie plte Sel Oute ing The specifiction of olle Followes seies is inicte by the ientifiction numbe. In ition, fo ppliction of olle guie, sel stuctue n shpe of outsie sufce to ech moels, efe to the imension tble Angement exmple NAST ZZUU Angement exmple 2 NAT V UU Neele olle ge Angement exmple 3 NUT 5 Angement exmple 4 Y 2 V UU Moel Pge 3 2 imensions Pge 3 3 olle guie Pge 4 Inne ing 4 5 Sel stuctue Shpe of outsie sufce Pge 4 Pge 4 elible n poven olle Followes seies! olle Followes e beings with neele olles in the thick n esigne fo ottion of the. Thee e sepble/non-sepble moel, ylinicl olle Followes, n othe moels. olle Followes e wiely use s followe beings of vious cm mechnisms n guie olles fo line motion of tnsfe mchine. 2 elte Poucts (olle Followe)

2 Ientifiction Numbe n Specifiction Moelimensions olle Guie TypeSel StuctueShpe of Oute ing Outsie Sufce Moel Sepble olle Followes Without inne ing With inne ing n-sepble olle Followes ylinicl olle Followes Inch seies n-sepble olle Followes :NAST :NAST :NAT :NUT :Y 3 olle guie ge : :V As cge hs smlle fiction coefficient, it is suite fo high-spee ottion. is suite fo sections whee lowspee ottion, oscilltoy movement o hevy lo exists. Fo pplicble moels n imensions, see Tble. te ( ) ylinicl olle Followes e full complement with no. 2 imensions Tble Moels n imensions Inictes the inne ing boe imete.(unit: ) Fo inch seies, outsie imete e inicte in /6 inch. Shpe Moel hcteistics Inne ing boe imete Sepble olle Followes 4 Sel stuctue Sepble olle Followes Open : Shiel :ZZ Sele :ZZUU Othe thn Sepble olle Followes Shiel : Sele :UU Shiel is shpe so tht clence between the oute ing n stu flnge n between the n sie plte become smlle n lbyinth is fome. The sele incopotes the sel stuctue, which cn pevent foeign substnces fom enteing. Oute ing ge Inne ing Sie plte Neele olle NAST NAST This hs stuctue combining the, the inne ing, n the neele cge n offes excellent high-spee ottion pefomnce. In ition, ech pt is sepble n hs hnlebility. The inne ing is not povie fo NAST. The inne ing is povie fo NAST. 7 to 6 5 Shpe of outsie sufce ylinicl owne : : owne is effective fo mitigtion of en lo genete ue to instlltion eos. ylinicl is suite if the pplie lo is lge o hness of cm guie sufce is low. Sel n-sepble olle Followes Oute ing Sie plte Inne ing NAT This non-sepble being hs pessfitte sie plte t both sies of the inne ing. ge n full complement e vilble fo you use. 5 to 5 Neele olle Sel ylinicl olle Followes Oute ing Inne ing NUT The full complement being with ouble ow cylinicl olles incopote in the cn eceive lge il lo n some xil lo. 5 to 5 Shiel plte Sie plte ylinicl olles Inch seies n-sepble olle Followes Oute ing Sie plte Inne ing Y This is inch seies olle Followes of NAT with blck oxie film tetment. 6. to 3.75 Neele olle Sel elte Poucts (olle Followe) 3 4

3 Lo ting n Life sic ynmic lo ting sic ynmic lo ting efes to sttic il lo with cetin iection n size with which 9% of goup of the sme olle Followes cn un one million ottions without mteil mges ue to olling contct ftigue when they e opete in the sme conitions. sic sttic lo ting sic sttic lo ting efes to sttic il lo with cetin iection n size with cetin contct stess t the cente of contct pts of the olling elements n cewy une mximum lo. Life The bsic ting life clcultion fomuls e shown below. L = ( P ) /3 () whee, L : sic ting life 6 ev. : sic ynmic lo ting N P : ynmic equivlent il lo N Theefoe, life time cn be clculte by pplying the ottionl spee to the fomul below. L h = 6 L 6n (2) whee, L h : sic ting life epesente s time h n : ottionl spee min - Sttic sfety fcto Sttic sfety fcto cn be obtine by the following eqution n typicl vlues e inicte in Tble 2. f s = P (3) whee, f s : Sttic sfety fcto : sic sttic lo ting N P : Sttic equivlent il lo (mximum lo) N Tble 2 Sttic sfety fcto eing use conitions When high ottion ccucy is equie f s 3 ml opeting conitions.5 When smooth opetions e not equie with high pioity une noml opeting conitions When it is ely otte Lo fcto Lo ctully pplie on the olle Followes becomes lge thn lo theoeticlly clculte fom vibtion n shock. Theefoe, multiply the lo by the lo fcto inicte in the Tble 3. Tble 3 Lo fcto Opeting conition Smooth opetion fee fom shock ml opetion f w ~.2.2~.5 Opetion with shock lo.5~3 Mximum Allowble Sttic Lo A lo tht olle Followes cn hnle my epen on the stength of the the thn the lo ting s neele olle being. Fo this eson the mximum llowble sttic lo is efine. Accucy Accucy of olle Followes is shown in Tbles 4, 5., 5.2, n 5.3.The tolence of the smllest single olle set boe imete of sepble olle Followes is shown in Tble 6.We lso povie specil ccucy clss pouct. Fo etils, plese contct. Tble 4 Tolence Nme oe imete of inne ing Outsie imete of With of With of inne ing With of being < Seies Sepble olle Followes n-sepble olle Followes ylinicl olle Followes Metic seies Inch seies owne ylinicl owne ylinicl + 5 See Tble h2 - - See Tble 5.2 olle set boe imete Sepble olle Followes See Tble 6 - Tble 5. Tolence n llownce of inne ing (metic seies) - h See Tble 5.3 Δmp V sp V mp K i V s minl boe i. Single plne men boe i. oe i. vition Men boe i. il unout With vition evition in single il plne vition Ove Incl. High Low (Mximum) (Mximum) (Mximum) (Mximum) Tble 5.2 Tolence n llownce of (metic seies cylinicl ) V sp Δmp V mp K e V s Outsie i. minl outsie i. of Single plne men outsie i. Men outsie il unout With vition vition in evition i. vition single il plne Ove Incl. High Low (Mximum) (Mximum) (Mximum) (Mximum) See the llownce of V s fo the sme being. elte Poucts (olle Followe) 5 6

4 Accucy Tble 5.3 Tolence n llownce of (inch seies n cylinicl ) V sp Δmp V mp K e Outsie i. minl outsie i. of Single plne men outsie i. Men outsie i. il unout vition in evition vition single il plne Ove Incl. High Low (Mximum) (Mximum) (Mximum) Fit olle Followes e genelly use fo ottion lo. A ecoene fit with shft is shown in Tble 8. Inch seies is escibe in the imension tble. Tble 8 ecoene fit (metic seies) Moel of being Sepble olle Without inne ing Followes With inne ing n-sepble olle Followes ylinicl olle Followes Tolence clss of shft k5, k6 g6, h6 Tble 6 Tolence of smllest single olle set boe imete s min minl olle set boe imete Δ Fws min evition of smllest single olle set boe imete Ove Incl. High Low il Intenl lence il intenl clence of olle Followes is inicte in the Tble 7. Tble 7 il intenl clence vlue Sepble olle Followes Metic seies n-sepble olle Followes Ientifiction numbe ( ) ylinicl olle Followes Inch seies n-sepble olle Followes il intenl clence Minimum NAST 6 NAT 5 5 NAST 8 to NAST2 NAT 6 to NAT2 5 NAST5 to NAST NAT5 to NAT NAST to NAST NAT to NAT NAST, NAST5 NAT, NAT5 5 5 Mximum NUT5 to NUT- NUT to NUT- 5 NUT to NUT5-6 Y2 to Y56 6 Y64 7 te ( ) Also pplicble to the full complement, the shiel n sele s, n the cylinicl. elte Poucts (olle Followe) 7 8

5 Tck pcity Allowble ottionl Spee Mounting Tck cpcity efes to llowble lo with which the mting membe mteil cn continuously enue the contct between olle Followes n steel mting cm guie sufce (plne) without geneting efomtion o inenttion. Tck cpcities inicte in the Tble 9. n Tble 9.2 e vlues on the ssumption tht hness of the mting membe mteil is H (tensile stength: N/ 2 ) Tble 9. Tck cpcity (metic seies) owne Ientifiction numbe Sepble n-sepble olle Followes olle Followes ylinicl olle Followes Tck cpcity Ientifiction numbe n if hness is not H, these vlues must be multiplie by tck cpcity fctos inicte in the Tble. If the lubiction between n mting cm guie sufce is not sufficient, seizue n we my be genete epening on use conitions. Specil ce is equie fo lubiction n sufce oughness t high ottionl spee of the cm mechnism, etc. Tck cpcity ylinicl Ientifiction numbe ( 2 ) Tck cpcity Ientifiction numbe NAST 5 NAT 5 NAST () NAST 6 NAT 6 3 () NAST NAST 6ZZ () NAST 8 NAT 8 85 () NAST NAST 8ZZ () NAST NAT 2 47 () NAST 5 6 NASTZZ () NAST2 NAT2 2 7 () NAST NAST2ZZ 7 - unit: N Tck cpcity () NAST5 NAT5 NUT5 3 6 () NAST NAST5ZZ 8 NUT 5 5 NUT NUT () NAST7 NAT7 NUT () NAST7 9 NAST7ZZ 7 NUT NUT NUT 7-6 () NAST NAT NUT 4 5 () NAST 2 8 NASTZZ 3 8 NUT NUT NUT - 22 () NAST NAT NUT 5 9 () NAST 4 NASTZZ 5 NUT 22 NUT NUT - 26 () NAST NAT NUT 6 58 () NAST 22 NASTZZ 22 NUT 3 6 NUT NUT () NAST NAT NUT 8 () NAST 7 NASTZZ 7 NUT 36 7 NUT NUT - 8 () NAST NAT NUT 9 2 () NAST 26 9 NASTZZ NUT 44 NUT NUT () NAST NAT NUT 9 99 () NAST 5 NASTZZ NUT 47 NUT NUT - 55 () NAST5 NAT5 NUT5 8 () NAST5 NAST5ZZ 34 NUT NUT NUT te ( ) Also pplicble to the full complement n the shiel n sele. ( 2 ) Also pplicble to the sele. Tble 9.2 Tck cpcity (inch seies) owne Ientifiction numbe Tck cpcity Ientifiction numbe ylinicl unit: N Tck cpcity Y2 853 Y Y4 5 Y4 5 Y6 4 Y Y8 66 Y8 7 7 Y 2 6 Y 7 Y22 2 Y22 8 Y 3 Y 5 Y Y Y 4 Y 2 Y 4 6 Y 22 5 Y 5 69 Y 8 Y Y Y 8 97 Y 44 9 Y44 Y44 49 Y48 Y48 64 Y Y Y56 4 Y56 87 Y Y64 3 te ( ) Also pplicble to the sele. Tble Tck cpcity fcto Hness H Tensile stength N/ 2 Tck cpcity fcto owne oute ing ylinicl The llowble ottionl spee fo olle Followes is ffecte by mounting n use conitions. Fo n vlue with only pue il lo pplie, use vlues in Tble o lowe s efeences. Une ctul use conitions, it is ecoene to use n, one tenth of inicte vlues, tking into ccount the effect of xil lo. Tble n vlue ( ) of olle Followes Lubiction Moel of being Gese lubiction Oil lubiction ge ylinicl olle Followes 72 te ( ) n vlue = x n whee, : eing boe imete n: ottionl spee min - Lubiction Alvni Gese S2 [SHOWA SHELL SEKIYU K. K.] is pepcke s lubiction gese in the sele of olle Followes, ylinicl olle Followes, n Inch seies olle Followes. Fee gese o oil fom the oil hole on the inne ing to use the being without pe-pcke gese. Othewise, incese we on the olling contct sufce n/o shot life time my be esulte. Oil hole An oil hole is not povie fo the open of Sepble olle Followes. As fo the othe metic seies olle Followes, one oil hole is povie. An oil goove n one oil hole e povie fo the inne ing of the inch seies. Opeting Tempetue nge olle Followes cn be use in n envionment between - n. Fo usge exceeing, plese contct. The sele cn withstn up to. Fo continuous usge, plese keep it une 8. ❶ Mount the mounting pt of the shiel/sele ccoing to the imensions in the imension tble.(see Fig. ) ❷ When mounting olle Followes, mke sue tht the oil hole on the inne ing oes not ente the loing e. Othewise, pouct life my become shote.(see Fig. 2) ❸ When mounting the sele of Sepble olle Followes, mke sue tht the sie plte oes not come off. If the sie plte comes off, mke sue not to hve the sel lip bitten when mounting it. ❹ If using being without the inne ing, it is necessy to hve the being het-tete n goun. At this time, the shft sufce hness of 58 to 64 H n the shft sufce oughness of.2 μm o less is ecoene. In ition, it is iel to hve the sie sufce of the mounting pt goun becuse the n the cge e guie in the xil iection by the sie sufce. At minimum, mke the sufce tune o pocesse similly.(see Fig. 3) ❺ When mounting n-sepble olle Followes, mke sue not to push the sie plte becuse it is pess-fitte. α Fig. Mting seting imension "" Oil hole Fig. 2 Oil hole loction n loing iection Fig. 3 Mounting exmple of being without inne ing elte Poucts (olle Followe) 9

6 Sepble olle FollowesOpen TypeWithout Inne ing Selectble pouct specifictions olle guie Sel stuctue V ZZ ge Open Type Shiel Sepble olle FollowesOpen TypeWith Inne ing Selectble pouct specifictions olle guie Sel stuctue V ZZ ge Open Type Shiel ZZUU Shpe of outsie sufce Sele ylinicl owne 5 ZZUU Shpe of outsie sufce Sele ylinicl owne 5 NAST NAST NAST NAST Shft imete Ientifiction numbe owne Open Type ylinicl Mss (ef.) minl imensions sic ynmic lo ting sic sttic lo ting g s min N N 7 NAST 5 NAST NAST 6 NAST NAST 8 NAST NAST NAST NAST 2 NAST NAST 5 NAST NAST 7 NAST NAST NAST NAST NAST NAST NAST NAST NAST NAST NAST NAST NAST NAST 5 NAST te ( ) This epesents the minimum tolence imensions of the chmfe imensions. emks. oil hole is povie. 2. Gese is not pe-pcke. Use the pouct with ppopite lubiction. Shft imete Ientifiction numbe owne Open Type ylinicl Mss (ef.) minl imensions sic ynmic lo ting sic sttic lo ting s min s min F g w N N Assemble inne ing 6 NAST 6 NAST LT 6 S 8 NAST 8 NAST LT 8 S NAST NAST LT 42 S 2 NAST 2 NAST LT 262 S 5 NAST 5 NAST LT 52 S 7 NAST 7 NAST LT 7226 S NAST NAST LT 6 S NAST NAST LT 6 S NAST NAST LT 38 S NAST NAST LT 42 S NAST NAST LT 5 S NAST NAST LT 55 S 5 NAST 5 NAST LT 56 S te ( ) This epesents the minimum tolence imensions of the chmfe imensions n. emks. oil hole is povie. 2.Gese is not pe-pcke. Use the pouct with ppopite lubiction. N=.2kgf=.lbs. =.3937inch 2

7 Sepble olle FollowesShiel TypeWith Inne ing Sepble olle FollowesSele TypeWith Inne ing Selectble pouct specifictions olle guie Sel stuctue V ZZ ge Open Type Shiel e ZZUU Sele f f e Shpe of outsie sufce ylinicl owne 5 5 NASTZZ NASTZZ NASTZZUU NASTZZUU Shft imete Ientifiction numbe Mss (ef.) minl imensions sic ynmic lo ting Shiel Sele Type g e f owne ylinicl owne ylinicl N N 6 NAST 6 ZZ NAST 6ZZ NAST 6 ZZUU NAST 6 ZZUU NAST 8 ZZ NAST 8ZZ NAST 8 ZZUU NAST 8 ZZUU NAST ZZ NAST ZZ NAST ZZUU NAST ZZUU NAST 2 ZZ NAST 2 ZZ NAST 2 ZZUU NAST 2 ZZUU NAST 5 ZZ NAST 5 ZZ NAST 5 ZZUU NAST 5 ZZUU NAST 7 ZZ NAST 7 ZZ NAST 7 ZZUU NAST 7 ZZUU NAST ZZ NAST ZZ NAST ZZUU NAST ZZUU NAST ZZ NAST ZZ NAST ZZUU NAST ZZUU NAST ZZ NAST ZZ NAST ZZUU NAST ZZUU NAST ZZ NAST ZZ NAST ZZUU NAST ZZUU NAST ZZ NAST ZZ NAST ZZUU NAST ZZUU NAST ZZ NAST ZZ NAST ZZUU NAST ZZUU NAST 5 ZZ NAST 5 ZZ NAST 5 ZZUU NAST 5 ZZUU emks. One oil hole is povie fo the inne ing. 2. Gese is pe-pcke fo the sele. Gese is not pe-pcke fo the shiel. Use the pouct with ppopite lubiction. sic sttic lo ting 3 N=.2kgf=.lbs. =.3937inch 4

8 n-sepble olle Followes Selectble pouct specifictions olle guie V ge Sel stuctue UU Shiel Sele Shpe of outsie sufce ylinicl owne NAT NATV NATUU NATVUU Shft Ientifiction numbe imete Shiel Sele Type owne owne ge ge NAT 5 NAT 6 NAT 8 NAT NAT 2 NAT 5 NAT 7 NAT NAT NAT NAT NAT NAT NAT 5 NAT 5 V NAT 6 V NAT 8 V NAT V NAT 2 V NAT 5 V NAT 7 V NAT V NAT V NAT V NAT V NAT V NAT V NAT 5 V NAT 5 UU NAT 6 UU NAT 8 UU NAT UU NAT 2 UU NAT 5 UU NAT 7 UU NAT UU NAT UU NAT UU NAT UU NAT UU NAT UU NAT 5 UU NAT 5 VUU NAT 6 VUU NAT 8 VUU NAT VUU NAT 2 VUU NAT 5 VUU NAT 7 VUU NAT VUU NAT VUU NAT VUU NAT VUU NAT VUU NAT VUU NAT 5 VUU Mss (ef.) g emks. One oil hole is povie fo the inne ing. 2. Gese is pe-pcke fo the sele. Gese is not pe-pcke fo the shiel. Use the pouct with ppopite lubiction. minl imensions sic ynmic lo ting sic sttic lo ting Mximum llowble sttic lo N N N N=.2kgf=.lbs. =.3937inch 6

9 ylinicl olle Followes Selectble pouct specifictions olle guie Sel stuctue UU Shpe of outsie sufce Shiel Sele ylinicl owne 5 NUT NUT Shft imete Ientifiction numbe Mss (ef.) minl imensions sic ynmic lo ting sic sttic lo ting owne ylinicl g s min s min N N N NUT 5 NUT 5- NUT 7 NUT 7- NUT NUT - NUT NUT - NUT NUT - NUT NUT - NUT NUT - NUT NUT - NUT 5 NUT 5- NUT 5 NUT 5- NUT 7 NUT 7- NUT NUT - NUT NUT - NUT NUT - NUT NUT - NUT NUT - NUT NUT - NUT 5 NUT te ( ) This epesents the minimum tolence imensions of the chmfe imensions n. emks. One oil hole is povie fo the inne ing. 2. Gese is pe-pcke Mximum llowble sttic lo N=.2kgf=.lbs. =.3937inch 8

10 Inch Seies n-sepble olle Followes Selectble pouct specifictions olle guie Sel stuctue V UU ge Shiel Sele Shpe of outsie sufce ylinicl owne YV YV YVUU YVUU Shft imete (inch) 6. ( 4 ) ( 6) ( 8 ).2 7 ( 6) 2.7 ( 2 ) ( 8 ) ( 4 ). ( ).575 ( 8) 3.75 ( 4) Ientifiction numbe Mss minl imensions (inch) Shft imete sic ynmic Shiel Sele Type (ef.) lence fit Tnsition fit Intefeence fit lo ting owne Y 2 V Y 4 V Y 6 V Y 8 V Y V Y 22 V Y V Y 26 V Y V Y V Y V Y 36 V Y V Y 44 V Y 48 V Y 52 V ylinicl Y 2 V Y 4 V Y 6 V Y 8 V Y V Y 22 V Y V Y 26 V Y V Y V Y V Y 36 V Y V Y 44 V Y 48 V Y 52 V owne Y 2 VUU Y 4 VUU Y 6 VUU Y 8 VUU Y VUU Y 22 VUU Y VUU Y 26 VUU Y VUU Y VUU Y VUU Y 36 VUU Y VUU Y 44 VUU Y 48 VUU Y 52 VUU ylinicl Y 2 VUU Y 4 VUU Y 6 VUU Y 8 VUU Y VUU Y 22 VUU Y VUU Y 26 VUU Y VUU Y VUU Y VUU Y 36 VUU Y VUU Y 44 VUU Y 48 VUU Y 52 VUU Minimum Mximum Minimum Mximum Minimum Mximum g N N Y 56 V Y 56 V Y 56 VUU Y 56 VUU Y 64 V Y 64 V Y 64 VUU Y 64 VUU emks. An oil goove n one oil hole e povie fo the inne ing. 2. Gese is pe-pcke sic sttic lo ting N=.2kgf=.lbs. =.3937inch 3

RF-N SHOWN RF-N RF-N12-B

RF-N SHOWN RF-N RF-N12-B 8 7 6 5 4 1 FE NGLES 1 O O O 1 4 F-N14-4-7 SHOWN EVISIONS EV. ZONE ESIPTION Y TE INITIL ELESE E SHEET JW J 1/1/00 0/1/01 OETE ITEM LLOONS & E NOTES LP 07//01 UPTE ITEMS 6-1, UPTE WG & FILE M 11/9/01 E

More information

TESTING RIG FOR STUDYING THE BEHAVIOUR OF SPHERICAL JOINTS AND SPHERICAL BEARINGS USED IN MINING INDUSTRY

TESTING RIG FOR STUDYING THE BEHAVIOUR OF SPHERICAL JOINTS AND SPHERICAL BEARINGS USED IN MINING INDUSTRY 003 ISSN 11-4590 161 TESTING RIG FOR STUDYING THE BEHAVIOUR OF SPHERICAL JOINTS AND SPHERICAL BEARINGS USED IN MINING INDUSTRY Fncisc Tkcs 1, Vsile Zmfi 1, Soinel Hohotă 1 Univesity of Petoşni, S.C. Gospodăie

More information

FIELD DRILL FOR 5/8" BOLT AFTER SETTING STIFF ARM LOCATION. 2 PL FIELD DRILL FOR 5/8" BOLT. 2 PL DMHD

FIELD DRILL FOR 5/8 BOLT AFTER SETTING STIFF ARM LOCATION. 2 PL FIELD DRILL FOR 5/8 BOLT. 2 PL DMHD 8 7 6 4 3 2 ITEM PT NO. ESIPTION QTY. MH46.0 ISH MOUNT 88.6 LS 2 MH46H HWE KIT(ITEMS 3-7) 3 MH46.02 TOP PIPE MOUNT 7.47 LS 4 MH46.03 OTTOM PIPE MOUNT.88 LS MH46.04 OTTOM SLE 32.92 LS 6 MH46.0 TOP SLE 40.34

More information

Structure and Features

Structure and Features Stuctue an Featues Stuctues of eele Rolle Beains with Sepaable ae eele Rolle Beains with Sepaable ae - Without Inne Rin eele Rolle Beains with Sepaable ae - With Inne Rin In eele Rolle Beains with Sepaable

More information

RF-N SHOWN RF-N RF-N14-B RF-N RF-N12-B

RF-N SHOWN RF-N RF-N14-B RF-N RF-N12-B 8 7 6 5 4 1 F-N14-4-7 SHOWN EVISIONS EV. ZONE ESIPTION Y TE INITIL ELESE JW 1/1/00 E SHEET J 0/1/01 OETE ITEM LLOONS & E NOTES LP 07//01 UPTE ITEMS 6-1, UPTE W & FILE M 11/9/01 E E SSEMLY ETILS 1/4/0 F

More information

Kirchhoff s Rules. Kirchhoff s Laws. Kirchhoff s Rules. Kirchhoff s Laws. Practice. Understanding SPH4UW. Kirchhoff s Voltage Rule (KVR):

Kirchhoff s Rules. Kirchhoff s Laws. Kirchhoff s Rules. Kirchhoff s Laws. Practice. Understanding SPH4UW. Kirchhoff s Voltage Rule (KVR): SPH4UW Kirchhoff s ules Kirchhoff s oltge ule (K): Sum of voltge drops round loop is zero. Kirchhoff s Lws Kirchhoff s Current ule (KC): Current going in equls current coming out. Kirchhoff s ules etween

More information

Polar Coordinates. July 30, 2014

Polar Coordinates. July 30, 2014 Polr Coordintes July 3, 4 Sometimes it is more helpful to look t point in the xy-plne not in terms of how fr it is horizontlly nd verticlly (this would men looking t the Crtesin, or rectngulr, coordintes

More information

2. Self-tapping screws as tensile reinforcements perpendicular to the grain

2. Self-tapping screws as tensile reinforcements perpendicular to the grain Reinforcements perpeniculr to te grin using self-tpping screws Univ.-Prof. Dr.-Ing. Hns Jocim Blss Dipl.-Ing. Ireneusz Bejtk Lerstul für Ingenieurolzbu un Bukonstruktionen University of Krlsrue 7618 Krlsrue,

More information

Synchronous Machine Parameter Measurement

Synchronous Machine Parameter Measurement Synchronous Mchine Prmeter Mesurement 1 Synchronous Mchine Prmeter Mesurement Introduction Wound field synchronous mchines re mostly used for power genertion but lso re well suited for motor pplictions

More information

Safety Relay Unit. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category. possible 24 VAC/VDC G9SA-501.

Safety Relay Unit. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category. possible 24 VAC/VDC G9SA-501. Sfety Rely Unit The Series Offers Complete Line-up of Compct Units. Four kinds of -mm wide Units re ville: A -pole model, -pole model, nd models with poles nd OFF-dely poles, s well s Two-hnd ler. Simple

More information

Synchronous Machine Parameter Measurement

Synchronous Machine Parameter Measurement Synchronous Mchine Prmeter Mesurement 1 Synchronous Mchine Prmeter Mesurement Introduction Wound field synchronous mchines re mostly used for power genertion but lso re well suited for motor pplictions

More information

CHAPTER 35 MAGNETIC FIELD DUE TO CURRENT

CHAPTER 35 MAGNETIC FIELD DUE TO CURRENT HTER 3 MGNETI FIEL UE T URRENT F F N. F q o, q T.sec. / sec. o,., m m N m 7 6 T T ong +ve Y ecton. 3..6 mm So,.8 mm.8 m 7 8., 8 m 7. T 8. 7 T-m/ 3 T mt N m N cm. m,, T We know: Mgnetc fe ue to ong stght

More information

Quality SyStem Certified to iso 9001 and as9100

Quality SyStem Certified to iso 9001 and as9100 610 Qulity SyStem ertifie to iso 9001 n S9100 AURORA EARING OMPANY ontents Pge No. engineering t - Prouct informtion...3-5 ommercil/inustril units ro ens SPm, SP Mle Mole Rce Series...6 SP, SPG Femle Mole

More information

Job Sheet 2. Variable Speed Drive Operation OBJECTIVE PROCEDURE. To install and operate a Variable Speed Drive.

Job Sheet 2. Variable Speed Drive Operation OBJECTIVE PROCEDURE. To install and operate a Variable Speed Drive. Job Sheet 2 Vrible Speed Drive Opertion OBJECTIVE To instll nd operte Vrible Speed Drive. PROCEDURE Before proceeding with this job, complete the sfety check list in Appendix B. 1. On the Vrible Speed

More information

Back EMF Design of an AFPM Motor using PCB Winding by Quasi 3D Space Harmonic Analysis Method

Back EMF Design of an AFPM Motor using PCB Winding by Quasi 3D Space Harmonic Analysis Method 73 Jounl of Electicl Engineeing & Technology Vol. 7, No. 5, pp. 73~735, 1 http://dx.doi.og/37/jeet.1.7.5.73 Bck EMF Design of n AFPM Moto using PCB Winding by Qusi 3D Spce Hmonic Anlysis Method De-Kyu

More information

Exercise 1-1. The Sine Wave EXERCISE OBJECTIVE DISCUSSION OUTLINE. Relationship between a rotating phasor and a sine wave DISCUSSION

Exercise 1-1. The Sine Wave EXERCISE OBJECTIVE DISCUSSION OUTLINE. Relationship between a rotating phasor and a sine wave DISCUSSION Exercise 1-1 The Sine Wve EXERCISE OBJECTIVE When you hve completed this exercise, you will be fmilir with the notion of sine wve nd how it cn be expressed s phsor rotting round the center of circle. You

More information

CS 135: Computer Architecture I. Boolean Algebra. Basic Logic Gates

CS 135: Computer Architecture I. Boolean Algebra. Basic Logic Gates Bsic Logic Gtes : Computer Architecture I Boolen Algebr Instructor: Prof. Bhgi Nrhri Dept. of Computer Science Course URL: www.ses.gwu.edu/~bhgiweb/cs35/ Digitl Logic Circuits We sw how we cn build the

More information

MAXIMUM FLOWS IN FUZZY NETWORKS WITH FUNNEL-SHAPED NODES

MAXIMUM FLOWS IN FUZZY NETWORKS WITH FUNNEL-SHAPED NODES MAXIMUM FLOWS IN FUZZY NETWORKS WITH FUNNEL-SHAPED NODES Romn V. Tyshchuk Informtion Systems Deprtment, AMI corportion, Donetsk, Ukrine E-mil: rt_science@hotmil.com 1 INTRODUCTION During the considertion

More information

R32 C'SINK C'SINK BMS 1-11 BMS UP R BRS

R32 C'SINK C'SINK BMS 1-11 BMS UP R BRS ... 0 HOLES mm EQULY IVIE ON SURFCE.. SECTION - -0 R M -0 R. M.. 0-0. R 0-0 0 - M M R. M HEX - 0 0 PC -0 M M. R R R. TKE PRT -0.. SECTION - -0-0 SOLER -.. R - FOL LINE. FOL LINE FLT PTTERN mm THICK PC

More information

Student Book SERIES. Fractions. Name

Student Book SERIES. Fractions. Name D Student Book Nme Series D Contents Topic Introducing frctions (pp. ) modelling frctions frctions of collection compring nd ordering frctions frction ingo pply Dte completed / / / / / / / / Topic Types

More information

7700VR Series Copy Milling Cutter

7700VR Series Copy Milling Cutter 7700VR Seies Copy Milling Cutte Facing Copy / 3D Ramping Spial / Cicula Helical Intepolation Helical Intepolation with Boe Hole Pocketing ROUND INSERT MILLING CUTTERS WITHOUT INDEXATION The 7700VR seies

More information

TECHNICAL DATA. JIS (Japanese Industrial Standard) Screw Thread. Specifications

TECHNICAL DATA. JIS (Japanese Industrial Standard) Screw Thread. Specifications JIS (Japanese Industial Standad) Scew Thead Specifications TECNICAL DATA Note: Although these specifications ae based on JIS they also apply to and DIN s. Some comments added by Mayland Metics Coutesy

More information

Multi-Point Astragal Prehanger Installation Instructions

Multi-Point Astragal Prehanger Installation Instructions Multi-Point Astrgl Prehnger Instlltion Instructions 8817 West Mrket Street Colfx, NC 27235 800.334.2006 www.endurproducts.com Tools Required: Endur Router Templte (or equivlent) Router with 5/8" dimeter

More information

ABB STOTZ-KONTAKT. ABB i-bus EIB Current Module SM/S Intelligent Installation Systems. User Manual SM/S In = 16 A AC Un = 230 V AC

ABB STOTZ-KONTAKT. ABB i-bus EIB Current Module SM/S Intelligent Installation Systems. User Manual SM/S In = 16 A AC Un = 230 V AC User Mnul ntelligent nstlltion Systems A B 1 2 3 4 5 6 7 8 30 ma 30 ma n = AC Un = 230 V AC 30 ma 9 10 11 12 C ABB STOTZ-KONTAKT Appliction Softwre Current Vlue Threshold/1 Contents Pge 1 Device Chrcteristics...

More information

Example. Check that the Jacobian of the transformation to spherical coordinates is

Example. Check that the Jacobian of the transformation to spherical coordinates is lss, given on Feb 3, 2, for Mth 3, Winter 2 Recll tht the fctor which ppers in chnge of vrible formul when integrting is the Jcobin, which is the determinnt of mtrix of first order prtil derivtives. Exmple.

More information

Experiment 3: Non-Ideal Operational Amplifiers

Experiment 3: Non-Ideal Operational Amplifiers Experiment 3: Non-Idel Opertionl Amplifiers Fll 2009 Equivlent Circuits The bsic ssumptions for n idel opertionl mplifier re n infinite differentil gin ( d ), n infinite input resistnce (R i ), zero output

More information

Compared to generators DC MOTORS. Back e.m.f. Back e.m.f. Example. Example. The construction of a d.c. motor is the same as a d.c. generator.

Compared to generators DC MOTORS. Back e.m.f. Back e.m.f. Example. Example. The construction of a d.c. motor is the same as a d.c. generator. Compred to genertors DC MOTORS Prepred by Engr. JP Timol Reference: Electricl nd Electronic Principles nd Technology The construction of d.c. motor is the sme s d.c. genertor. the generted e.m.f. is less

More information

Student Book SERIES. Patterns and Algebra. Name

Student Book SERIES. Patterns and Algebra. Name E Student Book 3 + 7 5 + 5 Nme Contents Series E Topic Ptterns nd functions (pp. ) identifying nd creting ptterns skip counting completing nd descriing ptterns predicting repeting ptterns predicting growing

More information

Application Note. Differential Amplifier

Application Note. Differential Amplifier Appliction Note AN367 Differentil Amplifier Author: Dve n Ess Associted Project: Yes Associted Prt Fmily: CY8C9x66, CY8C7x43, CY8C4x3A PSoC Designer ersion: 4. SP3 Abstrct For mny sensing pplictions, desirble

More information

Ultimate Flip Lever Astragal Prehanger Installation Instructions

Ultimate Flip Lever Astragal Prehanger Installation Instructions Ultimte Flip Lever Astrgl Prehnger Instlltion Instructions Tools Required: Flthed Screwdriver Shers Phillips Screwdriver Tpe Mesure Kit Includes: Full Astrgl Full Length Trim Strip Screw Pck Field Pck

More information

Joanna Towler, Roading Engineer, Professional Services, NZTA National Office Dave Bates, Operations Manager, NZTA National Office

Joanna Towler, Roading Engineer, Professional Services, NZTA National Office Dave Bates, Operations Manager, NZTA National Office . TECHNICA MEMOANDM To Cc repred By Endorsed By NZTA Network Mngement Consultnts nd Contrctors NZTA egionl Opertions Mngers nd Are Mngers Dve Btes, Opertions Mnger, NZTA Ntionl Office Jonn Towler, oding

More information

On/off valves with spool position monitoring

On/off valves with spool position monitoring On/off vlves with spool position monitoring RE 2483/2. Replces: 3.8 /3 Tble of contents Contents Pge Generl 2 Directionl set vlve type SED 3 Directionl set vlve type SEW 4 Directionl set vlve type SH,

More information

Copyright 2014 Winnebago Industries, Inc.

Copyright 2014 Winnebago Industries, Inc. anger of electrical shock, burns or death. lways remove all power sources before attempting any repair, service or diagnostic work. Power can be present from shore power, generator, inverter or battery.

More information

''Violet'' drill series.

''Violet'' drill series. 0. Updte B00G NEW SIZES VA-PDS VA-PDM VIOLET SERIES, HIGH PRECISION DRILLS VA-PDS VA-PDM VA-PDS-SUS VA-PDM-SUS A new stndrd for high precision drills! ''Violet'' drill series. Stble, long life Consistent

More information

Ultimate Trilennium Astragal Prehanger Installation Instructions

Ultimate Trilennium Astragal Prehanger Installation Instructions Ultimte Trilennium Astrgl Prehnger Instlltion Instructions Tools Required: Flthed Screwdriver Shers Phillips Screwdriver Power Drill with 1" Drill Bit Tpe Mesure 1" Spde Bit Kit Includes: Full Astrgl Full

More information

Understanding Basic Analog Ideal Op Amps

Understanding Basic Analog Ideal Op Amps Appliction Report SLAA068A - April 2000 Understnding Bsic Anlog Idel Op Amps Ron Mncini Mixed Signl Products ABSTRACT This ppliction report develops the equtions for the idel opertionl mplifier (op mp).

More information

Experiment 3: Non-Ideal Operational Amplifiers

Experiment 3: Non-Ideal Operational Amplifiers Experiment 3: Non-Idel Opertionl Amplifiers 9/11/06 Equivlent Circuits The bsic ssumptions for n idel opertionl mplifier re n infinite differentil gin ( d ), n infinite input resistnce (R i ), zero output

More information

Copyright 2014 Winnebago Industries, Inc.

Copyright 2014 Winnebago Industries, Inc. anger of electrical shock, burns or death. lways remove all power sources before attempting any repair, service or diagnostic work. Power can be present from shore power, generator, inverter or battery.

More information

ALTERNATIVE WAYS TO ENHANCE PERFORMANCE OF BTB HVDC SYSTEMS DURING POWER DISTURBANCES. Pretty Mary Tom 1, Anu Punnen 2.

ALTERNATIVE WAYS TO ENHANCE PERFORMANCE OF BTB HVDC SYSTEMS DURING POWER DISTURBANCES. Pretty Mary Tom 1, Anu Punnen 2. ALTERNATIVE WAYS TO ENHANCE PERFORMANCE OF BTB HVDC SYSTEMS DURING POWER DISTURBANCES Pretty Mry Tom, Anu Punnen Dept.of Electricl n Electronics Engg. Sint Gits College of Engineering,Pthmuttm,Kerl,Ini

More information

Inclined Plane Walking Compensation for a Humanoid Robot

Inclined Plane Walking Compensation for a Humanoid Robot Incline Plne Wlking Compenstion for Humnoi Robot Nttpong Kewlek n Thvi Mneewrn Institute of Fiel Robotics, King Mongkut's University of Technology Thonburi, Bngkok, Thiln (Tel : +662-4709339; E-mil: k.nttpong@hotmil.co.th,

More information

ADM488A/ADM489A. Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers FUNCTIONAL BLOCK DIAGRAMS FEATURES APPLICATIONS

ADM488A/ADM489A. Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers FUNCTIONAL BLOCK DIAGRAMS FEATURES APPLICATIONS Full-uplex, Low Power, Slew ate Limited, EI S-485 Transceivers M488/M489 FETUES Complies with NSI TI/EI-485--1998 and ISO 8482: 1987(E) 250 kbps data rate Single 5 V ± 10% supply 7 V to +12 V bus common-mode

More information

Steps to Completion. A Word about Sanding and Cleaning

Steps to Completion. A Word about Sanding and Cleaning Supplement ES/IV Intenl Rue Bellcnk Assembly S.1 Intuctin This supplement, the ES/IV Intenl Rue Bellcnk Assembly, eplces the instuctins pvie in INS-RD-066. This ls eplces the extenl ue cble cntls escibe

More information

ASY P.O. BOX 729 TERRELL, TEXAS / PAGE 1 OF 13 SAM

ASY P.O. BOX 729 TERRELL, TEXAS / PAGE 1 OF 13 SAM 203 Madix Inc., ll rights reserved ommon Parts 2 MXI GRI WIRE GRI SHELF WITH (GPWGS) MXI GRI FIXTURE PNEL (GPWFP) FIXTURE PNELS RE USE S EN SUPPORT. SHELF N E USE NYWHERE. MXI GRI REINFORMENT R 3 (GPR)

More information

Three-Phase Synchronous Machines The synchronous machine can be used to operate as: 1. Synchronous motors 2. Synchronous generators (Alternator)

Three-Phase Synchronous Machines The synchronous machine can be used to operate as: 1. Synchronous motors 2. Synchronous generators (Alternator) Three-Phse Synchronous Mchines The synchronous mchine cn be used to operte s: 1. Synchronous motors 2. Synchronous genertors (Alterntor) Synchronous genertor is lso referred to s lterntor since it genertes

More information

MEASURE THE CHARACTERISTIC CURVES RELEVANT TO AN NPN TRANSISTOR

MEASURE THE CHARACTERISTIC CURVES RELEVANT TO AN NPN TRANSISTOR Electricity Electronics Bipolr Trnsistors MEASURE THE HARATERISTI URVES RELEVANT TO AN NPN TRANSISTOR Mesure the input chrcteristic, i.e. the bse current IB s function of the bse emitter voltge UBE. Mesure

More information

Engineer-to-Engineer Note

Engineer-to-Engineer Note Engineer-to-Engineer Note EE-297 Technicl notes on using Anlog Devices DSPs, processors nd development tools Visit our Web resources http://www.nlog.com/ee-notes nd http://www.nlog.com/processors or e-mil

More information

Tubing Spacers. Backing Plate. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a a. a a. a a

Tubing Spacers. Backing Plate. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a a. a a. a a Grnd Slm Instlltion Instructions TACO Metls Inc., 98 NE 179th Street Mimi, Florid 33162 hndyhnk@tcomrine.com tcomrine.com This Box Contins: 1- Port side Grnd Slm 1- Strbord side Grnd Slm 4-5/16 x 1 stinless

More information

DCM Series DC T-Series Non-Spring Return Rotary Electronic Damper Actuators

DCM Series DC T-Series Non-Spring Return Rotary Electronic Damper Actuators DCM-0 Series DC-0-T-Series Non-Spring Return Rotry Eletroni Dmper Atutors. Atutor. U-olt shft pter. Position initor EA0R e f g. Shft pter loking lip e. Position initor pter f. Mounting rket g. Mounting

More information

Lecture 20. Intro to line integrals. Dan Nichols MATH 233, Spring 2018 University of Massachusetts.

Lecture 20. Intro to line integrals. Dan Nichols MATH 233, Spring 2018 University of Massachusetts. Lecture 2 Intro to line integrls Dn Nichols nichols@mth.umss.edu MATH 233, Spring 218 University of Msschusetts April 12, 218 (2) onservtive vector fields We wnt to determine if F P (x, y), Q(x, y) is

More information

The adhesion and hysteresis effect in friction skin with artificial materials

The adhesion and hysteresis effect in friction skin with artificial materials IOP Confeence Seies: Mteils Science nd Engineeing PAPER OPEN ACCESS The dhesion nd hysteesis effect in fiction skin with tificil mteils To cite this ticle: K A Subhi et l 07 IOP Conf. Se.: Mte. Sci. Eng.

More information

Module 9. DC Machines. Version 2 EE IIT, Kharagpur

Module 9. DC Machines. Version 2 EE IIT, Kharagpur Module 9 DC Mchines Version EE IIT, Khrgpur esson 40 osses, Efficiency nd Testing of D.C. Mchines Version EE IIT, Khrgpur Contents 40 osses, efficiency nd testing of D.C. mchines (esson-40) 4 40.1 Gols

More information

From Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your

From Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your From Off-The-Shelf to Market-Ready New ge Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your end-use. visit newageenclosures.com/services or call 855-4N-ENCL

More information

Update B158J New Chip Breaker Inserts for Turning Expanded Inserts

Update B158J New Chip Breaker Inserts for Turning Expanded Inserts 2009.4 Updte B158J Expnded s New Chip Breker s for Turning Breker Offers the best performnce for utomotive prts pplictions! ysmooth chip control even t vried depths of cut, feeds nd cutting speeds! New

More information

Maximum Power Point Tracking Techniques for Efficient Photovoltaic Microsatellite Power Supply System

Maximum Power Point Tracking Techniques for Efficient Photovoltaic Microsatellite Power Supply System SSC1-III-1 Mximum Powe Point Tcking Techniques fo Efficient Photovoltic Micostellite Powe Supply System Hdi Mlek S Dds, YngQun Chen ECE Dept. of Uth Stte Univesity, Logn, Uth; Hdi.Mlek@enegydynmicslb.com

More information

1400 UG PADMOUNT TRANSFORMERS

1400 UG PADMOUNT TRANSFORMERS 00 UG PDMOUNT TNSFOMES //0 ~ F Bay-O-Net Fuse Schedule for Padmount Transformers ~ HB,HB Hillside Barrier ~ UID Padmounted Equipment Identification Tags & Safety Signs ~ UT Single Phase Padmount Transformer

More information

Section 16.3 Double Integrals over General Regions

Section 16.3 Double Integrals over General Regions Section 6.3 Double Integrls over Generl egions Not ever region is rectngle In the lst two sections we considered the problem of integrting function of two vribles over rectngle. This sitution however is

More information

Controls. Solid-State Switching Devices. Reference Manual April Low-Voltage Controls and Distribution

Controls. Solid-State Switching Devices. Reference Manual April Low-Voltage Controls and Distribution Controls Solid-Stte Switching Devices Reference Mnul April 2009 Low-Voltge Controls nd Distribution Controls Solid-Stte Switching Devices 4 Introduction Solid-Stte Switching Devices 5 Generl dt Solid-Stte

More information

VERSION 2 #BB_0001. Four complete assemblies to be made for the following tests: RFQ Major Vane to Minor Vane. Joint Test Assemblies

VERSION 2 #BB_0001. Four complete assemblies to be made for the following tests: RFQ Major Vane to Minor Vane. Joint Test Assemblies #_000 RFQ Major Vane to Minor Vane Joint Test ssemblies F RONT EN TEST STN (F.E.T.S.) SETION - SIE F F VERSION G G Number off: omplete ssemblies Hole centres: `0.0 mm Scale: o not scale rawing number:

More information

From Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your

From Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your From Off-The-Shelf to Market-Ready New ge Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your end-use. visit newageenclosures.com/services or call 855-4N-ENCL

More information

Extremely small "footprint" and the highest circuit density available AK550. Front Wire Entry

Extremely small footprint and the highest circuit density available AK550. Front Wire Entry FIXED PRINTED CIRCUIT Tubulr Screw Clmp For use when stndrd size printed circuit terminl blocks re too lrge for vilble spce or where very smll circuit bord is utilized. Our new subminiture design offers

More information

Spiral Tilings with C-curves

Spiral Tilings with C-curves Spirl Tilings with -curves Using ombintorics to Augment Trdition hris K. Plmer 19 North Albny Avenue hicgo, Illinois, 0 chris@shdowfolds.com www.shdowfolds.com Abstrct Spirl tilings used by rtisns through

More information

MFAH. Minimizes Burrs for High Quality Machining Results. Low Cutting Force Design

MFAH. Minimizes Burrs for High Quality Machining Results. Low Cutting Force Design igh fficiency Milling Cutter for Finishing Aluminum MFA igh fficiency Milling Cutter for Finishing Aluminum MFA NW CG Imge Low Cutting Force Minimizes Burrs nd Chipping for igh Qulity Mchining Results

More information

Section 17.2: Line Integrals. 1 Objectives. 2 Assignments. 3 Maple Commands. 1. Compute line integrals in IR 2 and IR Read Section 17.

Section 17.2: Line Integrals. 1 Objectives. 2 Assignments. 3 Maple Commands. 1. Compute line integrals in IR 2 and IR Read Section 17. Section 7.: Line Integrls Objectives. ompute line integrls in IR nd IR 3. Assignments. Red Section 7.. Problems:,5,9,,3,7,,4 3. hllenge: 6,3,37 4. Red Section 7.3 3 Mple ommnds Mple cn ctully evlute line

More information

BACK DOOR GLASS REPLACEMENT HINT:

BACK DOOR GLASS REPLACEMENT HINT: WINSHIEL/WINOWGLSS/MIRROR REPLEMENT 7025 The instlltion proeures re the removl proeures in reverse orer. However, only instlltion proeures requiring itionl inormtion re inlue. 700VX01 Pino Wire lip 1.

More information

Resolver Interface Card "OPC-G1. RES" Product Specifications

Resolver Interface Card OPC-G1. RES Product Specifications Resolver Interfce Crd "OPC-G1 G1-RES RES" Product Specifictions Suzuk Fctory Design Dept. Dte Nme Approved Drwn 2011-4-1 Awi/Ueki Checked 2011-4-1 Y.Kto Y.Kto Drwing No. Fuji Electric Co., Ltd. SI27-5375

More information

University of North Carolina-Charlotte Department of Electrical and Computer Engineering ECGR 4143/5195 Electrical Machinery Fall 2009

University of North Carolina-Charlotte Department of Electrical and Computer Engineering ECGR 4143/5195 Electrical Machinery Fall 2009 Problem 1: Using DC Mchine University o North Crolin-Chrlotte Deprtment o Electricl nd Computer Engineering ECGR 4143/5195 Electricl Mchinery Fll 2009 Problem Set 4 Due: Thursdy October 8 Suggested Reding:

More information

Roller chains. Roller chains

Roller chains. Roller chains re chrcterised by n bove-verge service life due to excellent wer resistnce, high consistency, mtchless precision nd considerbly higher breking strength nd ftigue strength thn required by DIN/ ISO stndrd.

More information

Design of a Pipelined DSP Microprocessor MUN DSP2000

Design of a Pipelined DSP Microprocessor MUN DSP2000 Design of Pipeline DSP icroprocessor N DSP2000 Cheng Li, Lu io, Qiyo Yu, P.Gillr n R.Venktesn Fculty of Engineering n Applie Science emoril niversity of Newfounln St. John s, NF, Cn A1B 3 E-mil: {licheng,

More information

Special Accessories. Sydrive Configurator software. 3G3IV-PCN329-E Inverter to PC cable. JVOP-160-OY Digital Operator (LCD display)

Special Accessories. Sydrive Configurator software. 3G3IV-PCN329-E Inverter to PC cable. JVOP-160-OY Digital Operator (LCD display) PE R52 C24 U11 C16 C26R6 U8 C28 C22 U7 R131 C33 U6 T1 Y1 U14 JP3 R25 R15 R15 R15 R10 R10 R105 R21 R5 C11 U10 R7 R102 C12 + + U9 R28 C5 R20 R30 R U10 C3 JP1 C1 + C17 R14 R1 R2 R5 R11 U1 JP5 JP6 RT4 C2 +

More information

DC electrical circuits

DC electrical circuits D elecicl cicuis hpe 8 lecomoive Foce Poenil Diffeences esisos in pllel nd seies icuis wih pcios Beies nd Geneos uen is poduced y pplying poenil diffeence coss conduco (V/). This poenil diffeence is se

More information

TOOLS NEWS CRN ENDMILL FOR COPPER ELECTRODE

TOOLS NEWS CRN ENDMILL FOR COPPER ELECTRODE TOOLS NEWS CN ENDMILL FO COPPE ELECTODE 007. Updte B00G Series expnsion, Corner dius type now included! A gret vriety of products. Totl sizes of 0 in 7 series. Copper Electrode End Mill Series CN Series

More information

NP10 DIGITAL MULTIMETER Functions and features of the multimeter:

NP10 DIGITAL MULTIMETER Functions and features of the multimeter: NP10 DIGITL MULTIMETER. unctions nd fetures of the multimeter: 1000 V CT III tri requencies from 10.00...10 M. Diode mesurement nd continuity testing. HOLD mesurement. Reltive mesurement. Duty cycle (%)

More information

Anti-Surge Thick Film Chip Resistors

Anti-Surge Thick Film Chip Resistors Anti-Surge Thick Film Chip Resistors Anti-Surge Thick Film Chip Re sis tors Type: ER PA, P3, PA3, P, P8, P4 Fetures ESD surge chrcteristics superior to stndrd metl fi lm resistors High relibility Metl

More information

The Discussion of this exercise covers the following points:

The Discussion of this exercise covers the following points: Exercise 4 Bttery Chrging Methods EXERCISE OBJECTIVE When you hve completed this exercise, you will be fmilir with the different chrging methods nd chrge-control techniques commonly used when chrging Ni-MI

More information

WARNING! Changer (5152) - Assembly and Operation Manual

WARNING! Changer (5152) - Assembly and Operation Manual Changer (5152) - ssembly and Operation anual Congratulations on purchasing a B Family product. This changer will provide many years of service if you adhere to the following guidelines for assembly, maintenance

More information

TIME: 1 hour 30 minutes

TIME: 1 hour 30 minutes UNIVERSITY OF AKRON DEPARTMENT OF ELECTRICAL AND COMPUTER ENGINEERING 4400: 34 INTRODUCTION TO COMMUNICATION SYSTEMS - Spring 07 SAMPLE FINAL EXAM TIME: hour 30 minutes INSTRUCTIONS: () Write your nme

More information

Explain why some genes do NOT assort independently. Also explain how an experiment by Morgan originally demonstrated this.

Explain why some genes do NOT assort independently. Also explain how an experiment by Morgan originally demonstrated this. Module 3D Chomosomes d Iheitce Medel s expeimets with pe plts led him to discove the sic lws tht gove how heedity fctos e tsmitted fom oe geetio to the ext. Howeve, Medel did ot kow whee these heedity

More information

METHOD OF LOCATION USING SIGNALS OF UNKNOWN ORIGIN. Inventor: Brian L. Baskin

METHOD OF LOCATION USING SIGNALS OF UNKNOWN ORIGIN. Inventor: Brian L. Baskin METHOD OF LOCATION USING SIGNALS OF UNKNOWN ORIGIN Inventor: Brin L. Bskin 1 ABSTRACT The present invention encompsses method of loction comprising: using plurlity of signl trnsceivers to receive one or

More information

ENGINE CONTROL (1MZ FE)

ENGINE CONTROL (1MZ FE) ENINE CONTOL (MZ FE) SYSTEM OUTLINE THIS SYSTEM UTILIZES N ENINE CONTOL MODULE (ENINE ND ELECTONICLLY CONTOLLED TNSMISSION ECU) ND MINTINS OVELL CONTOL OF THE ENINE, TNSMISSION ND SO ON. N OUTLINE OF THE

More information

Angle Drill Attachments & Accessories

Angle Drill Attachments & Accessories EPHY G O U P TOOLS ENGINEEED TO PEFOM EOSPCE FSTENE TOOLS EPHY TOOLS ENGINEEED TO PEFOM EOSPCE HND & PNEUMTIC TOOLS TEMPOY FSTENES ngle Drill ttachments & ccessories EPHY TOOL GOUP EPHY G O U P TOOLS ENGINEEED

More information

Geometric quantities for polar curves

Geometric quantities for polar curves Roerto s Notes on Integrl Clculus Chpter 5: Bsic pplictions of integrtion Section 10 Geometric quntities for polr curves Wht you need to know lredy: How to use integrls to compute res nd lengths of regions

More information

stanchion paper roll mandrel base FIGURE P3-12 ramp

stanchion paper roll mandrel base FIGURE P3-12 ramp 1 MCHINE DESIGN - n Integrted pproch stnchion pper ro mndre se FIGURE -1 roem -7 rmp FIGURE -1 roem -8 1-ft grid -0 Run the computer mode CSE for Cse Study (on the CD-ROM in sever nguges) nd move the point

More information

5 V Slew-Rate Limited Half- and Full-Duplex RS-485/RS-422 Transceivers ADM4850 ADM4857

5 V Slew-Rate Limited Half- and Full-Duplex RS-485/RS-422 Transceivers ADM4850 ADM4857 5 V Slew-ate Limited Half- and Full-Duplex S-485/S-422 Transceivers DM4850 DM4857 FETUES EI S-485-/S-422-compliant Data rate options DM4850/DM4854 115 kbps DM4851/DM4855 500 kbps DM4852/DM4856 2.5 Mbps

More information

Algorithms for Memory Hierarchies Lecture 14

Algorithms for Memory Hierarchies Lecture 14 Algorithms for emory Hierrchies Lecture 4 Lecturer: Nodri Sitchinv Scribe: ichel Hmnn Prllelism nd Cche Obliviousness The combintion of prllelism nd cche obliviousness is n ongoing topic of reserch, in

More information

Domination and Independence on Square Chessboard

Domination and Independence on Square Chessboard Engineering nd Technology Journl Vol. 5, Prt, No. 1, 017 A.A. Omrn Deprtment of Mthemtics, College of Eduction for Pure Science, University of bylon, bylon, Irq pure.hmed.omrn@uobby lon.edu.iq Domintion

More information

Anti-Surge Thick Film Chip Resistors Rtings ERJP3 (63) (63) ERJP6 ERJP8 (26) ERJP4 (2) Power Rting (3) t 7 C (W) Element Voltge () Mximum Overlod Volt

Anti-Surge Thick Film Chip Resistors Rtings ERJP3 (63) (63) ERJP6 ERJP8 (26) ERJP4 (2) Power Rting (3) t 7 C (W) Element Voltge () Mximum Overlod Volt Anti-Surge Thick Film Chip Resistors Anti-Surge Thick Film Chip Re sis tors 63, 85, 26, 2 : ERJ P3, PA3, P6, P8, P4 Fetures ESD surge chrcteristics superior to stndrd metl fi lm resistors High relibility

More information

Homework #1 due Monday at 6pm. White drop box in Student Lounge on the second floor of Cory. Tuesday labs cancelled next week

Homework #1 due Monday at 6pm. White drop box in Student Lounge on the second floor of Cory. Tuesday labs cancelled next week Announcements Homework #1 due Mondy t 6pm White drop ox in Student Lounge on the second floor of Cory Tuesdy ls cncelled next week Attend your other l slot Books on reserve in Bechtel Hmley, 2 nd nd 3

More information

Discontinued AN6262N, AN6263N. (planed maintenance type, maintenance type, planed discontinued typed, discontinued type)

Discontinued AN6262N, AN6263N. (planed maintenance type, maintenance type, planed discontinued typed, discontinued type) ICs for Cssette, Cssette Deck ANN, ANN Puse Detection s of Rdio Cssette, Cssette Deck Overview The ANN nd the ANN re the puse detection integrted circuits which select the progrm on the cssette tpe. In

More information

Large Commercial Trunking

Large Commercial Trunking Lrge Commercil Trunking 3.2 CONTENTS Lrge Commercil SIGNO BK - PVC-U...................3.7 Trunking 110x70 to 220x70mm SIGNO BA - Aluminium............... 3.13 110x70 to 220x70mm SIGNO BS - Steel...................

More information

Series AE W PFC INDUSTRIAL POWER SUPPLY

Series AE W PFC INDUSTRIAL POWER SUPPLY FEATURES Progrmmle output voltge (0%~05%) Progrmmle output current (0%~05%) Universl AC input / Full rnge Constnt current limiting Optionl glol control vi RS3 Selectle +5V / 0.5A or +9V / 0.3A uxiliry

More information

CHAPTER 2 LITERATURE STUDY

CHAPTER 2 LITERATURE STUDY CHAPTER LITERATURE STUDY. Introduction Multipliction involves two bsic opertions: the genertion of the prtil products nd their ccumultion. Therefore, there re two possible wys to speed up the multipliction:

More information

10! !. 3. Find the probability that a five-card poker hand (i.e. 5 cards out of a 52-card deck) will be:

10! !. 3. Find the probability that a five-card poker hand (i.e. 5 cards out of a 52-card deck) will be: MATH 0(001 Fall 2018 Homewok 2 Solutions Please infom you instucto if you find any eos in the solutions 1 Suppose that thee ae duck huntes, each with a pefect shot A flock of ducks fly ove, and each hunte

More information

Array chip resistors size ARC241/ARC242 ARV241/ARV242

Array chip resistors size ARC241/ARC242 ARV241/ARV242 Arry chip resistors FEATURES 4 0603 sized resistors in one 1206-sized pckge Reduced reel exchnge time Low ssembly costs Reduced PCB re Reduced size of finl equipment Higher component nd equipment relibility.

More information

G9SA. Safety Relay Unit. The G9SA Series Offers a Complete Line-up of Compact Units. Model Number Structure

G9SA. Safety Relay Unit. The G9SA Series Offers a Complete Line-up of Compact Units. Model Number Structure Sfety Rely Unit G9 CSM_G9_DS_E The G9 Series Offers Complete Line-up of Compct Units. Four kinds of -mm wide Units re ville: A -pole model, -pole model, nd models with poles nd OFF-dely poles, s well s

More information

SOLVING TRIANGLES USING THE SINE AND COSINE RULES

SOLVING TRIANGLES USING THE SINE AND COSINE RULES Mthemtics Revision Guides - Solving Generl Tringles - Sine nd Cosine Rules Pge 1 of 17 M.K. HOME TUITION Mthemtics Revision Guides Level: GCSE Higher Tier SOLVING TRIANGLES USING THE SINE AND COSINE RULES

More information

Synchronous Generator Line Synchronization

Synchronous Generator Line Synchronization Synchronous Genertor Line Synchroniztion 1 Synchronous Genertor Line Synchroniztion Introduction One issue in power genertion is synchronous genertor strting. Typiclly, synchronous genertor is connected

More information

3.3 V, ±15 kv ESD-Protected, Half- and Full-Duplex, RS-485/RS-422 Transceivers ADM3483E/ADM3486E/ADM3488E/ADM3490E/ADM3491E

3.3 V, ±15 kv ESD-Protected, Half- and Full-Duplex, RS-485/RS-422 Transceivers ADM3483E/ADM3486E/ADM3488E/ADM3490E/ADM3491E 3.3 V, ±5 kv ES-Protected, Half- and Full-uplex, S-485/S-422 Transceivers M3483E/M3486E/M3488E/M3490E/M349E FETUES TI/EI S-485/S-422 compliant ±5 kv ES protection on S-485 input/output pins ata rates M3483E/M3488E:

More information

EE Controls Lab #2: Implementing State-Transition Logic on a PLC

EE Controls Lab #2: Implementing State-Transition Logic on a PLC Objective: EE 44 - Controls Lb #2: Implementing Stte-rnsition Logic on PLC ssuming tht speed is not of essence, PLC's cn be used to implement stte trnsition logic. he dvntge of using PLC over using hrdwre

More information

ET 51 EXTERIOR ROOF DRIP SIDE FINISH MOULDING INSTALLATION

ET 51 EXTERIOR ROOF DRIP SIDE FINISH MOULDING INSTALLATION EXTERIOR ROOF DRIP SIDE FINISH MOULDING 51 INSTALLATION The procedure descried elow is for the LH side. Use the sme procedure for oth the RH nd LH sides, unless otherwise specified. 1. INSTALL ROOF SIDE

More information

How to remove BRNS/BRFS series from a PWB

How to remove BRNS/BRFS series from a PWB Applictions mnul for BRNS/BRFS series How to remove BRNS/BRFS series from PWB VER1.0 Applictions Mnul BRNS/BRFS series Pge 1. Overview 1-1 1.1 Overview 1-1 2. Preprtion 2-1 2.1 2.2 2.3 Removl tool Adhesive

More information