Features 24 ga steel or 26 ga steel. Colors available on standard or premium and metallic. 16 to 24 o.c. On site factory made.

Size: px

Start display at page:

Download "Features 24 ga steel or 26 ga steel. Colors available on standard or premium and metallic. 16 to 24 o.c. On site factory made."

Godfrey Casey
5 years ago
Views:

Strip Width Base Material Thickness Min Tensible Min Yield Coatings 16.00 to 24 in Steel.0128 to.027 in 52 - ksi 50 - ski Painted / Galvalume UL CONSTRUCTION NUMBERS: TGKX539 The Nail Strip 1.

1 Strip Width Base Material Thickness Min Tensible Min Yield Coatings to 24 in Steel.0128 to.027 in 52 - ksi 50 - ski Painted / Galvalume UL CONSTRUCTION NUMBERS: TGKX539 The Nail Strip 1.5 (NS-150) features structural performance as well as architectural aesthetics. Can be factory formed and/or fabricated on site for all the substrates described in the UL Construction numbers mentioned UL performed tests For Uplift Resistance of Roof Assemblies UL 580, CLASS 90 For impact resistance of prepared Roof-Covering Materials UL2218, CLASS 4 Fire Tests of roof Coverings UL 790, EXTERNAL FIRE EXPOSURE Features 24 ga steel or 26 ga steel. Colors available on standard or premium and metallic. 16 to 24 o.c. On site factory made. Available in smooth, striated, offset and stiffener Ribs. Finish Kynar 500, Galvalume, Galvanized. requirements Solid substrate (plywood). Vapor barrier. Minimum Roof Slope 3 : 12 Available in smooth, striatec, offset and stiffener Ribs. 1

2 UL Construction Number Panel Coverage (in) Gauge Clip Max. Clip spacing Roof Substrate Impact Resistance UL-2218 Fire Rating UL-263 Uplift Resistance UL Max Min Plywood Class 4 Class A Class 90 Notes Test Procedures are in accordance with Underwriters Laboratories Standard UL-580 under Test for Uplift Resistance of Roof Assemblies. QM NS 150 Panels carry a Class 4 rating under UL-2218 Test Standard for Impact Resistance 2

3 ul construction number tgkx Metal Roof Deck Panels*-No. 29 MSG min coated steel. Max panel width 24 in. Rib height nominal 1 in. Panels continuous over two or more spans. A bead of sealant may be used at panel laps. 2.- Fasteners - (Screws) - For panel attachment to wood deck (item3), fasteners to be No. 10 x 1 in. long No. 2 Phillips, Pancake Head Type A. Fasteners spacing to be 12 in. OC with fasteners installed through prepunched slots in fastener flange of panel. For attachment of plywood deck (item 3) to joists (item 5), fasteners to be min. No. 6 by 1-7/8 bugle head screw or annular ring-shank nails. Spacing to be 6 in. OC at plywood edges and 12 in. OC at intermediate supports. When light gauge structural steel joists are used, fasteners to be No. 12 by 1-5/8 in. long with a Philips head. 3.- Substructure - (Plywood) - Plywood decking to be a nom 5/8 in. thick, exposure sheating span C-D, 40/20 plywood. All butt joints to be sealed against leakage by using tape and/or caulk or with one-part urethane sealant. 4.- Moistures Barrier - Plywood decking to be nominal 1/2 in. (15/32 in. actual) thick APA Rated seathing. The grade of the plywood to be B-C. 5.- Joists - Joists spaced at 2 ft, 0 in. OC, may be one of the following: A. Nom 2 by 6 in. wood joists No. 2 or better. B. Nom 2 by 4 in. wood when used on a top cord of a wood truss, No. 2 or better. 3

4 Introduction NS-150 Standing Seam is a architectural (nonstructural) panel which is snapped together during installation. The product is an integral interlocking system by design meaning the panels install in one direction from a given starting point. NS-150 panel gives you the leak resistance and beauty of a traditional standing seam roof without long fastening slots allow the panel to easily expand and contract with temperature changes. Design NS-150 Standing Seam requires low maintenance and easy installation. Because you don't have to put down clips installation over solid decking is a snap. project, NS-150 will work on either. Applications Ideal for residential and light commercial applications Symmetrical Visual Aesthetics: providing a non-directional appearance. Tools and Equipment Installer must have prior experience and knowledge of the tolls listed below and their uses in working Caulking Gun Snips Cordless Screw Gun Pop Rivet Tool Tape Measure Hemming Tool Electrical Extension Cord Heavy Gloves Safety Glasses. Color and Finishes 24 and 26 Gauge Galvalume 35 Year Finish Warranty on Kynar 500 Finish Widths Actual Panel Coverage (Width): 17 and 20 Minimum Slope = 3":12" Lengths NS-150 Panel is available in standard lengths from 4 to 40. Longer lengths require additional handling, packaging, and shipping considerations. An extra handling charge may apply to panels over 40. Continuous Rollformed Lengths: eliminates need for panel lap joints. Installation Solid Substrate Required Snap Seam No Field Seaming Required Weather Tight Warranty is not Available Underlayment Required Oil Canning and reduce the incidence of oil canning in the panels. Testing UL 790 Fire Test of Roof Coverings, Class A, B, C UL 2218 For Impact Resistance, Class 4 UL 580 Uplift Resistance. Class 90 Construction No Packaging Options Standard packing A packaging charge will be added to all orders. Standard packing is crating for all orders. LTL packing For LTL, panels are packaged in a completely enclose crate to provide optimum protection. Additional charges will apply for non-standard packing and special requests. 4

5 Strippable film Removal The panels may have a protective strippable film layer applied to the topside of the panel to prevent possible damage to the painted surface. If panel has a protective film coating, remove the film before exposing to direct sunlight and high temperatures. After exposure to sunlight, the film cannot be removed. Under no circumstances should the film remain on the panels after installation. Receiving Materials It is the responsibility of the installer to unload material from the delivery truck. The installer shall be responsible for providing suitable equipment for unloading of material from the delivery truck. After receiving material, check the condition of the material, and review the shipment against the shipping list to ensure all materials are accounted for. If damages or shortages are discovered, it should be noted on the shipping copy at time of delivery. If material is delivered by common carrier, a claim must be made with the carrier as soon as possible. Manual Handling A panel should never be picked up by its ends. Instead, lift the panel along its longitudinal edge and carry in a vertical (not flat) position. Safety Metal Panels can become slippery, so always wear shoes with non-slip soles. Walking or Standing on a metal roof which do not have plywood or other deck beneath it is not recommended. However, if you must do so, always walk on the purlins, never between. Delivery and Packing Options Lead Time Please allow 2-3 days for delivery for material or colors we have in stock. Color we have to paint please allow working days. Touch Up Paint All painted panels and flashings have a factory applied baked on finish. Handling and installing panels may result in some small scratches or nicks to the paint finish. Touch-up paint is available in matching colors. It is recommended that a small brush be used to apply touch-up paint to those areas that are in need of repair. Touch-up paint does not have the superior chalk and fade resistance of the factory applied paint finish and will normally discolor at an accelerated rate. Periodic touch-up may be required to maintain color match. There is no warranty on touch-up paint in regards to color match because the paint processes are different. Aerosol paint should not be used because of the overspray that may occur. Storage Bare Galvalume and painted panels can be expected to give many years of rust-free service when precautions are taken during storage. If metal is not to be used immediately, store inside in a well ventilated, dry location. Any outdoor storage is at the customer s own risk! At time of delivery, inspect panels for moisture. If moisture has formed, the panels should be uncrated, wiped dry, and allowed to dry completely. Failure to remove the entrapped moisture between the sheets immediately will affect the service life of the metal. Extended storage of panels in a bundle is not recommended. Storage on Roof, Crates need to be placed parallel to the framing members and the slope of the roof. Load capabilities of the structure must be checked prior to placing crates on the roof. 5

6 trim himp ridge himp ridge valley w/ integral cleat drip edge locking pitch change z bar end wall 6

7 RC24-SO13 A= 6 B=½ RC24-SO12 A=5 B=1 RC24-SO16 A=7 B=1 RC24-SO20 A=9½ B=1 RC24-SO24 A=11 B=1 RCS24-SO16 A= 4½ B=1 C=2 D=½ PC24-SO16 A= 5 B=1 C=2 D=7½ E=½ Z24-SO314 A=1 B= 1/4 C=1 Z24-SO334 A=1 ¾ B= 1¼ C=1 Z24-SO414 A=1 B=2 ¼ C=1 3 ¼ 3 ¾ 4 ¼ VENTED ZEE AVAILABLE, PLEASE INQUIRE 7

8 GUS24-SO235 A=4 B=4 C=7 D 3½ E=1 GU24-SO2114 A= 4½ B= 5¼ C 5½ D= 3 E= 1 F=1 21 ¼ 20 DS24-SO1618 A= 4 B= 3 C= 3½ VC24-SO24 A=4 B=1 C=5 D=1 E=1 8

9 CS24-SO418 A=2 B=5/8 C=1½ D=3/16 DRIP EDGE (DL) DL24-SO08 A=3 ¾ B=1 ¼ C=2 D=½ EAVE (OFFSET CLEAT) A EC24-SO08 A=4 B=3 C=½ B C SIDEWALL SW24-SO09 A=3 B=5 C= A C B 9

10 TRIM A JC24-SO06 A=3 3/8 B=1 1/8 C=1 D=½ D B C FW24-SO1078 A=6 B=5 5/8 C=1 ¼ D=½ EW24-SO09 A=3 B=5 C=1 HIGH SIDE FASCIA FH24-SO13 A=3 B=5 C=½ 10

11 1.5 nail strip 150 ACCESSORIES pipe flashing metal to metal metal to wood pancake wood pancake metal clips sealants 11

12 ACCESSORIES ITEM PIPE FLASHING - GRAY EPDM PIPE FLASHING - SILICONE PIPE SIZE RANGE 1¼ TO ⅛ 1¼ TO 2 1¾ TO 4 1¼ TO 4 3 TO 6 4 TO 7 6 TO 11 7 TO TO TO 24 PIPE SIZE RANGE 1¼ TO 4 4 TO 7 7 TO TO 18 DESCRIPTION EPDM rubber service temperature 65 f to 250 f if slope is more than 20 f use next size up BASE DIMENSION 3½ 3¾ 6¼ 7¾ 9¼ 10¾ 14½ 16½ 25⅜ 39½ X 35 SQ BASE DIMENSION 7 3¾ 10 ¾ 16 ½ 16 ½ (HIGH TEMPERATURE) RETROFIT PIPE FLASHING GRAY EPDM PIPE SIZE RANGE ¾ TO 2¾ 2 TO 7 ¼ 3 ¼ TO 10 silicone service temperature 40 to 350 if slope is more than 20 use next size up BASE DIMENSION 6 ¼ 10 ¾ 14 ½ EPDM rubber service temperature 65 f to 250 f if slope is more than 20 f use next size up POP RIVET finish plain stainless steel # 42, #43, #44, #46 painted stainless steel #42 Box size kynar 500 flashing- 24 ga typ galvalume Acrylic coated galvalume galvalume is a trade mark of biec, inc. 12

13 ACCESSORIES ITEM Pancake wood 1 DESCRIPTION finish Bag size Box size plain x 1 No. 2 phillips self driling 1 pancake finish Bag size Box size plain 250 2, x 1 No. 2 phillips finish Bag size Box size plain 250 2,000 painted 250 2,000 ¼- 14 x ¾ type ab metal to wood finish Bag size plain 250 painted 250 Box size 2,000 2, x 1 type 17 metal to wood 10 oz tube np1 caulk sealer kynar 500 flashing- 24 ga typ galvalume Acrylic coated galvalume galvalume is a trade mark of biec, inc. type color carton qty carton weight np1 np1 np1 np1 np1 np1 np1 np1 clear gray gray bronze tan almond black white green

14 Wood - Counter Flashing W/ Reglet Detail cird W. PEDEN SAN ANTONIO, TX (210) F (210)

15 Wood - Counter Flashing surface reglet detail csrd W. PEDEN SAN ANTONIO, TX (210) F (210)

16 Wood - Counter Flashing SIDING reglet detail csrd W. PEDEN SAN ANTONIO, TX (210) F (210)

17 Wood - EAVE FLASHING DETAIL EFD W. PEDEN SAN ANTONIO, TX (210) F (210)

18 Wood - EAVE gutter DETAIL EgD W. PEDEN SAN ANTONIO, TX (210) F (210)

19 Wood - ENDWALL DETAIL EWD W. PEDEN SAN ANTONIO, TX (210) F (210)

20 Wood - HIGHSIDE W/SIDING DETAIL HSSD W. PEDEN SAN ANTONIO, TX (210) F (210)

21 21

22 Wood - RAKE flashing detail rfd W. PEDEN SAN ANTONIO, TX (210) F (210)

23 Wood - ROOF JACK DETAIL 2 0.C. ROOF JACK FLASHING SEALANT BETWEEN PIPE BOOT AND PANEL rjd W. PEDEN SAN ANTONIO, TX (210) F (210)

24 Wood - Rake w/ Z detail FASTENER RAKE Z CLOSURE ATTACHED W/ 12 O.C. NS 150 PANEL 12 O.C. BUTYL TAPE 12 O.C. CLEAT RAKE FLASHING WOOD DECK ICE & WATERSHIELD FIELD BEND PANEL W/ BUTYL TAPE SEALANT rzd W. PEDEN SAN ANTONIO, TX (210) F (210)

25 Wood - SIDE WALL DETAIL SEALANT 12 O.C. COUNTER FLASHING SIDEWALL FLASHING RAKE Z CLOUSURE ATTACHED W/ O.C. BUTYL TYPE SEALANT NS150 PANEL ICE & WATERSHIELD WOOD DECK BY OTHERS FIELD BEND PANEL SWD W. PEDEN SAN ANTONIO, TX (210) F (210)

26 wood side wall w/insert cleat detail SEALANT 12 O.C. COUNTER FLASHING SIDEWALL FLASHING BUTYL TAPE SEALANT RAKE Z CLOSURE ATTACHED W/ 12 O.C. NS-150 PANEL ICE & WATERSHIELD WOOD DECK BY OTHERS FELD BEND PANEL SWD-01 26

27 wood side wall w/siding DETAIL SIDING BY OTHERS 12 O.C. COUNTER FLASHING SIDEWALL FLASHING BUTYL TAPE SEALANT RAKE Z CLOSURE ATTACHED W/ 12 O.C. NS 150 PANEL ICE & WATERSHIELD WOOD DECK BY OTHERS FIELD BEND PANEL SWS W. PEDEN SAN ANTONIO, TX (210) F (210)

28 WOOD - VALLEY W/ INTEGRATED CLEAT DETAIL SEALANT BETWEEN WEBS FILL PANEL HEM WITH BUTYL SEALANT 6 MIN VALLEY FLASHING NS 150 PANEL SELF- FHERING HT UNDERLAYMENT #10 X 1 PANCAKE FASTENER@12 O.C. ICE & WATERSHIELD WOOD DECK VICD W. PEDEN SAN ANTONIO, TX (210) F (210)

29 WOOD - HIP RIDGE DETAIL HIP/RIDGE FLASHING (3) FASTENERS PER PANEL BUTYL TAPE SEALANT 90 DEG. TURN - UP SEALANT FASTENER, 12. O.C. Z CLOSURE BUTYL TAPE SEALANT BUTYL TAPE SEALANT (3) FASTENERS PER PANEL WOOD DECK NS-150 PANEL BUTYL TAPE SEALANT ICE & WATERSHIELD WHR W. PEDEN SAN ANTONIO, TX (210) F (210)

TIOGA Table of Contents

TIOGA Table of Contents Table of Contents TABLE OF CONTENTS Product Data Sheet...2 Engineering Data...3 General Information...4 Handling...5 Roof Preparation...5 Fastening Recommendations...6 Field Cutting...7 Touch-up Paint...7