1 1/2 IN GATE VALVE, TAG:X326DU , 800# SW, BODY: FS ASTM A105, 316/STEL SEATS NACE, IN ACCORDANCE WIT
|
|
|
- John Ray
- 5 years ago
- Views:
Transcription
1 line_track part qty part_narr Pallet Number P00094 X328GV / /2 IN GATE 1500# SW 321 SS, 347/STEL SEATS E026 P00051 X328DD / /2 IN GATE 1500# SW STL, F6/STEL SEATS H2 NACE E036 P00077 X328DD / /2 IN GATE 1500# SW STL, F6/STEL SEATS NACE E036 P00046 X326DU / /2 IN GATE VALVE, TAG:X326DU , 800# SW, BODY: FS ASTM A105, 316/STEL SEATS NACE, IN ACCORDANCE WIT P00022 X328DU / /2 IN GATE VALVE, TAG:X328DU , 1500# SW, BODY: FS ASTM A105, 316/STEL SEATS NACE, IN ACCORDANCE WITH FICATION SHEET X328DU P CX-1 1/ /2 IN MANIFOLD CONDENSATE COLLECTION STL 12 CON E017 P00071 X328DU IN 1500# SW GATE VALVE, TAG:X328DU P00438 N424CB IN BALL, TOP ENTRY: CLASS - 150: ENDS - SOCKETWELD: BODY - FORGED CARBON STEEL (ASTM A105): TRIM SS: SEAT - REINFORCED PTFE: BONNET - BOLTED: STEM - BLOWOUT-PROOF: PACKING - FLEXIBLE GRAPHITE: GASKET - GRAPHITE: PORT - REGULAR: TEST - API 608:OPERATOR - LEVER: APPLIC. STANDARD(S) - API 608, GIS P00348 X328GV IN GATE 1500# SW 321 SS, 347/STEL SEATS E024 P00348 X328GV IN GATE 1500# SW 321 SS, 347/STEL SEATS E031 P00037 X328DD IN GATE 1500# SW STL, F6/STEL SEATS P00349 X338GV IN GATE 1500# SW/SCRD 321 SS, 347/STEL SEATS P00052 X338DD IN GATE 1500# SW/SCRD STL, F6/STEL SEATS H2 NACE P00078 X338DD IN GATE 1500# SW/SCRD STL, F6/STEL SEATS NACE P00032 X326DU IN GATE 800# SW STL, 316/STEL SEATS AMINE NACE P00034 X336DU IN GATE 800# SW/SCRD STL, 316/STEL SEATS AMINE NACE P00034 X336DU IN GATE 800# SW/SCRD STL, 316/STEL SEATS AMINE NACE P00435 X328GW IN GATE VALVE, TAG:X328GW , 1500# SW 321 SS, 347/STEL S&D H2, IN ACCORDANCE WITH VALVE SPECIFICAT P00435 X328GW IN GATE VALVE, TAG:X328GW , 1500# SW 321 SS, 347/STEL S&D H2, IN ACCORDANCE WITH VALVE SPECIFICAT E024 P00061 X336DD IN GATE VALVE, TAG:X336DD-0191, 800# SW/SCRD, BODY: FS ASTM A105, TRIM #8, IN ACCORDANCE WITH FICATION SHEET X336DD-0191 P00072 X338DU IN GATE VALVE, TAG:X338DU , 1500# SW/SCRD, BODY: FS ASTM A105, 316/STEL SEATS NACE, IN ACCORDANC P00436 X338GW IN GATE VALVE, TAG:X338GW , 1500# SW/SCRD 321 SS, 347/STEL S&D H2, IN ACCORDANCE WITH P00199 X326DT IN GATE VALVE; CLASS - 800;ENDS - SOCKETWELD;BODY - FORGED CARBON STEEL (ASTM A105);TRIM SS/HF SEATS & CLOSURE DEVICE;WEDGE - SOLID, 316 SS HARDFACED;SEAT - HARDFACED;BONNET - BOLTED;STEM - OS&Y;PORT - REDUCED;TEST - API 602;OPERATOR -HANDWHEEL;AP P00918 A426DC IN GLOBE VALVE; CLASS - 800;ENDS - SOCKETWELD;BODY - FORGED CARBON STEEL (ASTM A105);TRIM - API #8;DISC - T-PATTERN, 13 CR;SEAT - HARDFACED;BONNET - THREADED AND SEALWELDED;STEM - OS&Y;PORT - REDUCED;TEST - API 602;OPERATOR - HANDWHEEL;APPLIC.STANDARD(S) - API 602, GIS ;SPECIAL REQUIREMENTS
2 P00796 A326DC " 800# GLOBE VALVE P00442 X436DD /2 3 1/2 IN 800# SW/T GATE VALVE, TAG:X436DD P00605 X326DT /2 2 1/2 IN GATE 800# SW STL, 316/STEL S&D AMINE NACE P00201 X336DD /2 1 1/2 IN GATE VALVE, TAG:X336DD-0191, 800# SW/SCRD, BODY: FS ASTM A105, TRIM #8, IN ACCORDANCE WITH FICATION SHEET X336DD-0191 P00440 X426DD /2 1 1/2 IN GATE VALVE, TAG:X426DD-0191, 800# SW, BODY: FS ASTM A105, TRIM #8, IN ACCORDANCE WITH FI P00144 X338GV /2 1 1/2 IN GATE: CLASS : ENDS - SOCKETWELD X THREADED: BODY - FORGED 321 SS (A182 F321): TRIM - BONNET - BOLTED: STEM - OS&Y: PORT - REDUCED: TEST - API 602:OPERATOR - HANDWHEEL: APPLIC. STANDARD(S) - API 602, GIS : SPECIAL REQUIREMENTS P00917 A326DC /2 7 1/2 IN GLOBE VALVE, TAG:A326DC-0191, 800# SW, BODY: FS ASTM A105, TRIM #8, IN ACCORDANCE WITH FICATION SHEET A326DC-0191 P /2" 1500# GATE VALVE P00093 X357HV IN GATE 900# RF 347 SS, 347/STEL SEATS GO B6 P CX IN PADDLE BLANK: RATING - ASME CLASS 900: FACING - FOR RAISED FACE: MATERIAL STAINLESS STEEL: ASTM-A240, GRADE 321: STANDARDS - ASME B16.48 P CX IN PADDLE SPACER: RATING - ASME CLASS 900: FACING - FOR RAISED FACE: MATERIAL STAINLESS STEEL: ASTM-A240, GRADE 321: STANDARDS - ASME B16.48 P CX IN FLG BLIND 600# RF UNS P00028 X354FV IN GATE 300# RF 316 SS, 316/STEL SEATS B6 P CX IN PADDLE SPACER: RATING - ASME CLASS 900: FACING - FOR RAISED FACE: MATERIAL STAINLESS STEEL: ASTM-A240, GRADE 321: STANDARDS - ASME B16.48 P IN FLG BLIND 300# RF 316/316L SS P IN PADDLE SPACER;RATING - ASME CLASS 300;FACING - FOR RAISED FACE;MATERIAL - 316/316L STAINLESS STEEL;ASTM-A240, GRADE 316/316L;DUAL CERTIFIED;STANDARDS - ASME B16.48 P00091 X328GV IN GATE 1500# SW 321 SS, 347/STEL SEATS E031 P00895 X338GV IN GATE 1500# SW/SCRD 321 SS, 347/STEL SEATS P00048 X326DU IN GATE VALVE, TAG:X326DU , 800# SW, BODY: FS ASTM A105, 316/STEL SEATS NACE, IN ACCORDANCE WIT P00033 X326DU " 800# GATE VALVE P00096 X356CU IN GATE 600# RF STL, 316/STEL SEATS AMINE NACE E003 P00057 X356CA IN GATE 600# RF STL, F6/STEL SEATS E006 P00050 X356CA IN GATE 600# RF STL, F6/STEL SEATS H2 NACE E001 P00101 X357HV IN GATE 900# RF 347 SS, 347/STEL SEATS B6 P00053 F356CA " 600# GLOBE VALVE E016 P /4 IN 600# SOCW Y-TYPE STRAINER TAG: E031 P00441 X426DD /4 1 3/4 IN 800# SOCW GATE VALVE, TAG:X426DD P00087 X328GV /4 9 3/4 IN GATE 1500# SW 321 SS, 347/STEL SEATS E040 P00003 X336DD /4 4 3/4 IN GATE VALVE, TAG:X336DD-0191, 800# SW/SCRD, BODY: FS ASTM A105, TRIM #8, IN ACCORDANCE WITH VALVE SP E024
3 P00003 X336DD /4 5 P00076 X336EV /4 4 3/4 IN GATE VALVE, TAG:X336DD-0191, 800# SW/SCRD, BODY: FS ASTM A105, TRIM #8, IN ACCORDANCE WITH VALVE SP 3/4 IN GATE VALVE; CLASS - 800;ENDS - SOCKETWELD X THREADED;BODY - FORGED 316/316L SS (A182 F316/316L);TRIM - API #12;WEDGE - SOLID, 316 SS;SEAT - HARDFACED;BONNET - BOLTED;STEM - OS&Y;PORT - REDUCED;TEST - API 602;OPERATOR - HANDWHEEL;APPLIC.STANDARD(S) P00905 X336DU /4 2 3/4 IN GATE VALVE; CLASS - 800;ENDS - SOCKETWELD X THREADED;BODY - FORGED CARBON STEEL (ASTM A105);TRIM - API #12;WEDGE - SOLID, 316 SS;SEAT - HARDFACED;BONNET - BOLTED;STEM - OS&Y;PORT - REDUCED;TEST - API 602;OPERATOR - HANDWHEEL;APPLIC. STANDARD(S) -API 602, GIS ;SPECIAL REQUIREMENTS P00198 X326DT /4 2 P00088 X338GV /4 5 3/4 IN GATE VALVE; CLASS - 800;ENDS - SOCKETWELD;BODY - FORGED CARBON STEEL (ASTM A105);TRIM SS/HF SEATS & CLOSURE DEVICE;WEDGE - SOLID, 316 SS HARDFACED;SEAT - HARDFACED;BONNET - BOLTED;STEM - OS&Y;PORT - REDUCED;TEST - API 602;OPERATOR -HANDWHEEL;APPLIC. STANDARD(S) - API 602, GIS ;SPECIAL REQUIREMENTS 3/4 IN GATE: CLASS : ENDS - SOCKETWELD X THREADED: BODY - FORGED 321 SS (A182 F321): TRIM - BONNET - BOLTED: STEM - OS&Y: PORT - REDUCED: TEST - API 602:OPE P00088 X338GV /4 12 3/4 IN GATE: CLASS : ENDS - SOCKETWELD X THREADED: BODY - FORGED 321 SS (A182 F321): TRIM - BONNET - BOLTED: STEM - OS&Y: PORT - REDUCED: TEST - API 602:OPE E040 P00030 X326DD /4 1 3/4" 800# GATE VALVE P00044 X336DU /4 3 3/4" 800# GATE VALVE P00021 X356CU IN 600# RF GATE VALVE, TAG:X356CU-0190 E005 P00910 X356FV IN GATE 600# RF 316 SS, 316/STEL SEATS P00010 X352CA IN GATE VALVE, TAG:X352CA-01, 150# RF, BODY: CS ASTM A216 WCB, TRIM #8, IN ACCORDANCE WITH E001 P00011 F367HW IN CHECK VALVE, TAG:F367HW-0126, 900# RJ, BODY: 347 SS, 347/STEL S&D H2, IN ACCORDANCE WITH VALV B6 P00437 X356CU IN GATE 600# RF STL, 316/STEL SEATS GO AMINE NACE P00012 X367HW IN GATE VALVE, TAG:X367HW , 900# RJ, BODY: 347SS, 347/STEL S&D H2. B6 P00086 F357HV " 900# Check Valve B6 P00017 X354FV IN GATE 300# RF 316 SS, 316/STEL SEATS E040 P00002 X354CA IN GATE 300# RF STL, F6/STEL SEATS, TAG:X354CA-01 E020 P00893 X387HV S IN GATE 900# BW 347 SS, 347/STEL SEATS GO SCH80S P00092 X357HV IN GATE 900# RF 347 SS, 347/STEL SEATS GO B6 P00965 X352CA IN GATE VALVE, TAG:X352CA-01, 150# RF, BODY: CS ASTM A216 WCB, TRIM #8, IN ACCORDANCE WITH
4 P00023 X356FW IN GATE VALVE; CLASS - 600;ENDS - RAISED FACE FLANGED, PER ASME B16.5;BODY - FORGED 316 SS (A182 F316);TRIM SS/HF SEATS & CLOSURE DEVICE;WEDGE - FLEXIBLE, 316 SS;SEAT - HARDFACED;BONNET - BOLTED;STEM - OS&Y;PORT - REDUCED;TEST - API 600;OPERATOR- MANUAL B5 P00023 X356FW P00034 X354CA-01 4 P00147 X356CA P00148 X356CA IN GATE VALVE; CLASS - 600;ENDS - RAISED FACE FLANGED, PER ASME B16.5;BODY - FORGED 316 SS (A182 F316);TRIM SS/HF SEATS & CLOSURE DEVICE;WEDGE - FLEXIBLE, 316 SS;SEAT - HARDFACED;BONNET - BOLTED;STEM - OS&Y;PORT - REDUCED;TEST - API 600;OPERATOR- MANUAL 8 IN GATE VALVE; CLASS - 300;ENDS - RAISED FACE FLANGED, PER ASME B16.5;BODY - CAST CARBON OS&Y;PORT - FULL;TEST - API 600;OPERATOR - HANDWHEEL;APPLIC.STANDARD(S) - API 600, GIS ;SPECIAL REQUIREMENTS 3 IN GATE VALVE; CLASS - 600;ENDS - RAISED FACE FLANGED, PER ASME B16.5;BODY - CAST CARBON OS&Y;PORT - FULL;TEST - API 600;OPERATOR - HANDWHEEL;APPLIC.STANDARD(S) - API 600, GIS ;SPECIAL REQUIREMENTS 4 IN GATE VALVE; CLASS - 600;ENDS - RAISED FACE FLANGED, PER ASME B16.5;BODY - CAST CARBON OS&Y;PORT - FULL;TEST - API 600;OPERATOR - HANDWHEEL;APPLIC.STANDARD(S) - API 600, GIS P00155 F356CU IN CHECK, SWING: CLASS - 600: ENDS - RAISED FACE FLANGED, PER ASME B16.5: BODY - CAST CARBON STEEL (ASTM A216 WCB): TRIM - API #12: DISC - SWING TYPE, HARDFACED: SEAT - HARDFACED: COVER - BOLTED: PORT - FULL: TEST - API 600: APPLIC. STANDARD(S) - API594, GIS : SPECIAL REQUIREMENTS P00155 F356CU IN CHECK, SWING: CLASS - 600: ENDS - RAISED FACE FLANGED, PER ASME B16.5: BODY - CAST CARBON STEEL (ASTM A216 WCB): TRIM - API #12: DISC - SWING TYPE, HARDFACED: SEAT - HARDFACED: COVER - BOLTED: PORT - FULL: TEST - API 600: APPLIC. STANDARD(S) - API594, GIS P00171 F387HW P00172 X387CF P00175 X387HW IN SWING CHECK VALVE;CLASS - 900; ENDS - BUTTWELD, SCHEDULE 80S;BODY - CAST 347 SS (A351 CF8C);TRIM SS/HF SEAT & CLOSURE DEVICE;DISC - SWING TYPE, 347 SS HARDFACED;SEAT - HARDFACED;COVER - BOLTED;PORT - FULL;TEST - API 600;APPLIC. STANDARD(S) -API 594, GIS IN GATE: CLASS - 900: ENDS - BUTTWELD, SCHEDULE 120: BODY - CAST CARBON STEEL (ASTM A216 WCB): TRIM - API #5: WEDGE - FLEXIBLE, HARDFACED: SEAT - HARDFACED: BONNET - BOLTED: STEM - OS&Y: PORT - FULL: TEST - API 600: OPERATOR - MANUAL GEAR: APPLIC.STANDARD(S) - API 600, GIS : SPECIAL REQUIREMENTS B6 8 IN GATE VALVE; CLASS - 900;ENDS - BUTTWELD, SCHEDULE 80S;BODY - CAST 347 SS (A351 CF8C);TRIM SS/HF SEATS & CLOSURE DEVICE;WEDGE - FLEXIBLE, 347 SS HARDFACED;SEAT - HARDFACED;BONNET - BOLTED;STEM - OS&Y;PORT - FULL;TEST - API 600;OPERATOR -MANUAL
5 P00177 X387CF P00183 X356CT P00185 A387HW IN GATE: CLASS - 900: ENDS - BUTTWELD, SCHEDULE 120: BODY - CAST CARBON STEEL (ASTM A216 WCB): TRIM - API #5: WEDGE - FLEXIBLE, HARDFACED: SEAT - HARDFACED: BONNET - BOLTED: STEM - OS&Y: PORT - FULL: TEST - API 600: OPERATOR - MANUAL GEAR: APPLIC.STANDARD(S) - API 600, GIS IN GATE VALVE; CLASS - 600;ENDS - RAISED FACE FLANGED, PER ASME B16.5;BODY - CAST CARBON STEEL (ASTM A216-WCB);TRIM SS/HF SEATS & CLOSURE DEVICE;WEDGE - FLEXIBLE, HARDFACED;SEAT - HARDFACED;BONNET - BOLTED;STEM - OS&Y;PORT - FULL;TEST - API600;OPERATOR - MANUAL GEAR;APPLIC. STANDARD(S) - API 600, GIS IN GLOBE VALVE; CLASS - 900; ENDS - BUTTWELD, SCHEDULE 80S;BODY - CAST 347 SS (A351 CF8C);TRIM SS/HF SEAT & CLOSURE DEVICE;DISC - T-PATTERN, 347 SS HARDFACED;SEAT - HARDFACED;BONNET - BOLTED;STEM - OS&Y;PORT - REDUCED;TEST - API 600;OPERATOR -MANUAL GEAR;APPLIC. STANDARD(S) - API 600 P00582 X356HW IN GATE VALVE; CLASS - 600;ENDS - RAISED FACE FLANGED, PER ASME B16.5;BODY - CAST 347 SS (A351 CF8C);TRIM SS/HF SEATS & CLOSURE DEVICE;WEDGE - FLEXIBLE, 347 SS HARDFACED;SEAT - HARDFACED;BONNET - BOLTED;STEM - OS&Y;PORT - FULL;TEST - API600;OPERATOR - HANDWHEEL;APPLIC. STANDARD(S) - API 600, GIS B3
This specification describes the minimum requirements for piping systems for the following service:
SPEC-3004 1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Water Design Conditions Operating Conditions 10 PSIG @ 33 o F to
This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface.
SPEC-3500 1/9 1.0 PURPOSE This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. Note: This specification does
.1 Materials and installation for steel piping, valves and fittings for hydronic systems in building services piping..2 Related Sections.
Issued 2006/08/01 Section 15183 Hydronic Systems: Steel Page 1 of 6 PART 1 GENERAL 1.1 SUMMARY.1 Section Includes..1 Materials and installation for steel piping, valves and fittings for hydronic systems
CHINA ZHEJIANG ZHONGGONG VALVE GROUP CO,.LTD FORMEN VALVE
INTERNATIONAL SALES: FORMEN VALVE ADD: OUBEI TOWN, YONGJIA COUNTY, WENZHOU, ZHEJIANG, CHINA HEADQUARTER: ZHEJIANG ZHONGGONG VALVE GROUP ADD: WUXING INDUSTRY ZONE, OUBEI TOWN, WENZHOU, CHINA ABOUT US Formen
How to Identify a PBM VALVE SERIES
How to Identify a PBM VALVE SERIES Series 0 (SP, DP, MP) 1. If it is a manual valve, the handle generally would be made of a cast iron or cast bronze. 2. If it is a manual valve, the stem at the very top
This specification describes the minimum requirements for piping systems for the following service:
201/11/2 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Underground Service Water Note: This specification does not apply to piping
We Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for successful
w w w.fastwell.in CATALOG NUMBER FFI -1005
A trusted name in industrial valve company CATALOG NUMBER FFI -1005 Fastwell Fitting Industries is headquartered in Bakersfeld, California. We are a global manufacturer and supplier of valves to Oil &
This specification describes the minimum requirements for piping systems for the following service:
201/01/13 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Air Design Conditions Operating Conditions Blast Air (see Note 1)
GWC Italia. Proven technology for individual valve solutions worldwide. pb-1009
GWC Italia Proven technology for individual valve solutions worldwide pb-1009 GWC ITALIA Proven technology for individual valve solutions worldwide GWC Italia Worldwide Network italy group HEADQUARTERS,
SAMAMAT FLOW CONTROL L.L.C.
SAMAMAT FLOW CONTROL L.L.C. SFC-MK-LS-001 Rev.: 03 COMPANY PROFILE Company Location Company Information Company Size Nearest Transportation Company Name SAMAMAT FLOW CONTROL L.L.C Company Address Plot
Bronze Ball Valves. Ball-Grooved Box Qty. 1 1 Above with 2 internal Case Qty. 4 4 Supervisory Switches Unit Weight
FIRE PROTECTION VALVES FPP-0118 Effective January 1, 2018 Supercedes FPP-0717 of July 24, 2017 Prices and MTO status subject to change without notice. Visit our website for the most current information.
bronze ball valves Ball-Grooved Box Qty. 1 1 Above with 2 internal Case Qty. 4 4 Supervisory Switches Unit Weight
fire protection valves FPP-0312 Effective March 26, 2012 Supercedes FPP-0611 of June 1, 2011 Prices and MTO status subject to change without notice. Visit our website for the most current information.
Bronze Ball Valves. Ball-Grooved Box Qty. 1 1 Above with 2 internal Case Qty. 4 4 Supervisory Switches Unit Weight
FIRE PROTECTION VALVES FPP-0115 Effective January 19, 2015 Supercedes FPP-0114 of January 6, 2014 Prices and MTO status subject to change without notice. Visit our website for the most current information.
This specification describes the minimum requirements for piping systems for the following service:
SPEC-3501 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Instrument Air Design Conditions 150 PSIG @ 180 F Operating Conditions 125
Valves. Copyright 2007 Fluor Corporation. Lesson Objective. Lesson Objective. Introduction To Valves
Copyright 2007 Fluor Corporation Valves Lesson Objective Lesson Objective Introduction To Valves Basic Types of Valves Flow Characteristics Gate Valve Relief Valve Globe Valve Horizontal Lift Check Valve
ANDERSON GREENWOOD SAFETY SELECTOR VALVE
A dual pressure relief device system that provides a safe, efficient method of switching from an active PRV to a standby, maintaining system overpressure protection FEATURES GENERAL APPLICATION Safety
SECTION E CONTENTS THREE WAY VALVES DESCRIPTION
SECTION E CONTENTS THREE WAY VALVES DESCRIPTION PAGE 70-600, Threaded Bronze E-1 70-900, Solder Bronze E-2 76-600, Threaded Stainless Steel E-3 3-Way Valve Application E-4 Chromium plated ball 70-600 3-Way
A representative from Occupational Health is to be involved in the commissioning process to address any Respiratory Protection Program requirements.
SPEC-3017 1/8 1.0 PURPOSE This specification describes the minimum requirements for the installation of breathing air distribution systems (indoor and outdoor) up to the connection to the breathing air
HYDRONIC PIPING
SECTION 23 21 13 HYDRONIC PIPING PART 1 GENERAL 1.01 SECTION INCLUDES A. Hydronic system requirements. B. Heating water piping, above grade. C. Chilled water piping, above grade. D. Condenser water piping,
Note: Do not bury sulphur dioxide lines Use stainless steel pipe and fittings only where specified on project drawings.
1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Liquid and High Pressure Gaseous Dry Sulphur Dioxide (Less than 100 ppm of water)
SAUSALITO-MARIN CITY SANITARY DISTRICT MISCELLANEOUS UPGRADES PROJECT. Addendum No. 2
SAUSALITO-MARIN CITY SANITARY DISTRICT MISCELLANEOUS UPGRADES PROJECT Addendum No. 2 The following shall modify the Contract Documents. The work shall be accomplished in accordance with such modifications.
Edward Valves Flow Control Solutions
Edward Valves Flow Control Solutions World s leading supplier of gate, globe and check valves Proven leading supplier of critical application valves for power generation plants Experience In Motion A History
NAVSEA STANDARD ITEM T9074-AS-GIB-010/271, Requirements for Nondestructive Testing Methods
NAVSEA STANDARD ITEM ITEM NO: 009-48 DATE: 29 JUL 2011 CATEGORY: II 1. SCOPE: 1.1 Title: Pressure Seal Bonnet Valve; repair (shop) 2. REFERENCES: 2.1 S9086-CJ-STM-010/CH-075, Fasteners 2.2. T9074-AS-GIB-010/271,
General Information. Ball Curb Valve
General Information 1. All Jones Curb Valves are manufactured in accordance with the AWWA Standard C-800-latest revision. 1. Copper Alloy CDA No. C83600 (85-5-5-5) 2. Copper Alloy CDA No. 89520 (Low Lead)
QUALITY ASSURANCE SPECIFICATION
Page 1 of 8 QAS: 2.02 QUALITY ASSURANCE SPECIFICATION REVISION: 0 DATE: 08/29/14 MATERIAL PURCHASING Code Material Purchase Specification for Pipe, Valves, Fitting, and Flanges PAGE 1 OF 8 1.0 Purpose
SECTION BASIC MATERIALS AND METHODS
SECTION 15050 BASIC MATERIALS AND METHODS PART 1 - GENERAL 1.01 SECTION INCLUDES A. Pipe and Fittings. 1.02 RELATED SECTIONS A. Basic Mechanical Requirements: Section 15010. B. Supports, Anchors, and Seals:
Application for design registration
Avis au lecteur sur l accessibilité : Ce document est conforme au standard du gouvernement du Québec SGQRI 008-02 afin d être accessible à toute personne handicapée ou non. Toutes les notices entre accolades
PIPING NOMENCLATURE. Header Branch connection Valve Flange Expansion joint Expansion loop Pipe support Reducer Elbow
PIPING COMPONENTS Piping components are mechanical elements suitable for joining or assembly into pressure-tight fluid containing piping systems. Components include pipe, tubing, fittings, flanges, gaskets,
Stock Programme Scope of Supply. v
Scope of Supply v2.10 2018 Pipe: Seamless Stainless Steel ASTM A312 ASME B36.19 TP316/316L DN15 DN250 10S 160 Stainless Steel ASTM A312 ASME B36.19 TP304/304L DN15 DN200 10S 160 Low Temp ASTM A333 ASME
MATERIAL COMBINATION NUMBER 2: Corrosive environment requiring harder, wear-resistant seating faces and resistance to dezincification.
Cast Iron Slide Gates Spec Sheet General The contractor shall furnish and install the following cast iron slide gate assemblies as listed on the Gate Schedule and detailed on the manufacturer s drawings.
ADDENDUM NO. 1 TO THE CONTRACT DOCUMENTS AND SPECIFICATIONS DATED JULY 2017 FLORIDA GOVERNMENTAL UTILITY AUTHORITY PROJECT NO.
ADDENDUM NO. 1 TO THE CONTRACT DOCUMENTS AND SPECIFICATIONS DATED JULY 2017 FLORIDA GOVERNMENTAL UTILITY AUTHORITY PROJECT NO. PS 061 SEVEN SPRINGS WASTEWATER TREATMENT FACILITY IMPROVEMENTS PASCO COUNTY,
1
[Type text] www.upstreamflowsolutions.com 1 Upstream Flow Solutions evolved as a solution focused company targeting only the midstream and upstream sectors of the oil & gas industry from drilling operations
UL / FM E-1 FIRE PROTECTION PRODUCTS INDICATOR POST FEATURES. *Applies to "ORDER LENGTH" codes B through F; code A has 22" adjustment.
UL / FM MUELLER Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also, the Indicator
MECHANICAL ENGINEERING FUNDAMENTALS Training Duration 5 days
Training Title MECHANICAL ENGINEERING FUNDAMENTALS Training Duration 5 days Training Dates & Venue REF ME091 Mechanical Engineering Fundamentals 5 28 Aug 01 Sep $4,250 Abu Dhabi, UAE Training will be held
API 6D MV7-F MV7-P GATE VALVE FABRICATED BODY MV7-C GATE VALVES API 6D THROUGH-CONDUIT GATE VALVES THROUGH-CONDUIT GATE VALVE FORGED BODY GATE VALVE
I MV7-F GATE VALVE FORGED BODY MV7-P GATE VALVE FABRICATED BODY MV7-C GATE VALVE CAST BODY DUIT GATE VALVES DBB BALL VALVES CRYOGENIC HIGH MILAN API 6D API 6DSS API 6A API 17D BALL VALVES H TEMPERATURE
100% POSITIVE ISOLATION
100% POSITIVE ISOLATION ONIS Quick-Action Line Blind outperforms conventional blind solution: spectacle, slip and figure-8 blinds 1 up to 52 150# up to 2500# -155 F/-104 C up to 1400 F/760 C Improve Safety
Appendix E Part Details for the PT20 with Standard Bypass Valve
Appendix E Part Details for the PT0 with Standard Bypass Valve 8 ( ft lb) Part Number Locknut Wrench ( ft lb) 0 8 0 Note: The PT0 is shown below. All parts for the PT0 are the same except for the rotor
Your Global Sales Partner
Your Global Sales Partner www.techlineint.com THE TECHLINE COMMITMENT As a leader in global sourcing since 1982, we are dedicated to placing the world s manufacturing capabilities within the grasp of our
MEDIUM DUTY CAST IRON SLIDE GATES SERIES 20-10C
MEDIUM DUTY CAST IRON SLIDE GATES SERIES 20-10C Revised October 2007 Armtec reserves the right to alter designs. General The Armtec Sluice Gate is a quality and highly economical gate for a variety of
3-Way Ball Valves. Overview. Applications. Features & Benefits. Datasheet
3-Way Ball s Datasheet Overview 3-way Ball s are coupled with DA-Series Actuators to provide three-way mixing or diverting flow control. The ball valves are 1/4-turn rotary control valves and are available
MOTORIZED VALVES SHANGHAI INJOY INDUSTRY CO.,LTD.
MOTORIZED VALVES SHANGHAI INJOY INDUSTRY O.,LTD. MOTORIZED VALVE Ball Butterfly PAGE 1 Motorized heck Globe Gate Knife Gate M Series EAB Series Electric Actuator EAH Series H Series KE Series! Specialize
FUEL GAS PIPING SECTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section.
FUEL GAS PIPING SECTION 15355 PART 1 GENERAL 1.1 DESCRIPTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section. B. This specification covers both interior and exterior
Page 1 Parts List for AL-51G (L160) 07/08/201. Headstock Assembly
Page 1 Parts List for AL-51G (L160) 07/08/201 Headstock Assembly 1--------1002-------------------Headstock Casting 13-------1012------------------------------Nut M28 2--------1006---------------------------Flange
W-K-M Model MA-1 DynaCentric Butterfly Valve
Page 1 of 16 R E P A I R M A N U A L W-K-M Model MA-1 DynaCentric Butterfly Valve Page 2 of 16 Published October 2001 W-K-M and DynaCentric are trademarks of Cooper Cameron Corporation Cooper Cameron Corporation,
Allentown, PA - Plant Expansion Steel Pipe Spec. No. 671-S40 December 31, 2015
Steel DIVISION 15: MECHANICAL SECTION 15061: STEEL PIPE 1.0 GENERAL All materials shall be of high quality and as per the following specifications. 2.0 PRODUCTS 2.1 Specification CS-1 Service = (CA, VAC)
Essex County College - West Essex Campus Addition And Renovations dlb # / SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART I - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
Series 4000 Model B 3-Piece Ball Valves with ISO Bonnet
Series 4000 Model B 3-Piece Ball Valves with ISO Bonnet 1/2" 2" (DN 15 50) Standard Bore, 1/2" 1-1/2" (DN 15 40) Full Bore Installation, Maintenance and Operating Instructions IMO-210EN 5/2011 2 IMO-XXX
General Four-Way Operation, Maintenance & Service Manual
General Four-Way Operation, Maintenance & Service Manual SCOPE Included in the following pages you will find assembly drawings, exploded views, parts lists, assembly tips, operational descriptions and
Series 4000 Model B 3-Piece Ball Valves with ISO Bonnet
Series 4000 Model B 3-Piece Ball Valves with ISO Bonnet 1/2 2 (DN 15 50) Standard Bore, 1/2 1-1/2 (DN 15 40) Full Bore Installation, Maintenance and Operating Instructions IMO-210 EN 1/2018 2 IMO-210 EN
FIRE PROTECTION PRODUCTS
FEATURES Rev. 7-11 Mueller Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also,
DETAILED ENGINEERING OF PROCESS PIPING SYSTEMS
LAST UPDATED 25-10-2017 DETAILED ENGINEERING OF PROCESS PIPING SYSTEMS COURSE DURATION: 5 DAYS REACH US Today for Greater Safety, Quality, Reliability, Productivity, Profitability HRD Approved Class A
Tel : +31 (0) Fax: +31 (0)
Maverick Valves BV Jan van Galenstrt 17 3115 JG Schiedam The Netherlands Tel : +31 (0)10 303 2620 Fax: +31 (0)10 303 2670 info@maverickvalves.com www.maverickvalves.com THIS DOCUMENT AND THE INFORMATION
ANDERSON GREENWOOD. The Safety Selector Valve is designed specifically to function as an effective switchover device. Flow Control
ANDERSON GREENWOOD The Safety Selector Valve is designed specifically to function as an effective switchover device. Features Provides a safe, efficient method of switching from an active pressure relief
RECOMMENDED SPECIFICATIONS
VALVES & CONTROLS ANDERSON GREENWOOD SAFETY SELECTOR VALVE Designed specifically to function as an effective switchover device. FEATURES Designed to provide a safe, efficient method of switching from an
Rodney Hunt. A GA Industries Company Glydaseal Gates
Rodney Hunt A GA Industries Company Glydaseal Gates GUIDE BRONZE GUIDE BAR FRAME NUT POCKET SEAT FACING RESILIENT INVERT SEAT DISC GUIDE BAR ADJUSTMENT BOLT WITH LOCK NUT GUIDE BAR ATTACHING BOLT The Glydaseal
Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2
TOOLS Page Q 2 Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2 Page Q 3 Changeable carbide drill (WHM) Page Q 3/1 Drilling machine Tonisco
OPERATION AND MAINTENANCE INSTRUCTIONS AVK UNDERGROUND FIRE HYDRANT
1. INTRODUCTION Operation and maintenance manual for the series underground CLEARWAY fire hydrant 1 of 7 The designs, materials and specifications shown are subject to change without notice due to our
Face-to-Face and End-to-End Dimensions of Valves
ASME B16.10-2017 (Revision of ASME B16.10-2009) Face-to-Face and End-to-End Dimensions of Valves AN AMERICAN NATIONAL STANDARD ASME B16.10-2017 (Revision of ASME B16.10-2009) Face-to-Face and End-to-End
PENSTOCK VALVES. Performance through Excellence
VALVES & MANUFACTURING (1988) LTD. PENSTOCK VALVES Performance through Excellence SLIDEGATES WEIR GATES STOP LOGS SLIDEGATES PRECISION FACE SEALING VALVES WEIR GATES STOP LOGS SLIDEGATES Actuation Installation
5.1 MUELLER CORPORATION VALVES. MUELLER 300 Ball Type Corporation Valves
MUELLER CORPORATION VALVES 5.1 Shaded area indicates changes Rev. 4-14 Machine inserted corporation stops were developed by Hieronymus Mueller in conjunction with his development of the drilling and tapping
1/2 2 (DN 15 50) Standard Bore Series /2 1-1/2 (DN 15 40) Full Bore Series 9000 Flanged Ball Valves with ISO Bonnet
1/2 2 (DN 15 50) Standard Bore Series 7000 1/2 1-1/2 (DN 15 40) Full Bore Series 9000 Flanged Ball Valves with ISO Bonnet Installation, Maintenance and Operating Instructions IMO-214 EN 1/2018 2 IMO-214
Rosemount Specifications. Product Data Sheet , Rev BA February 2009 PERFORMANCE SPECIFICATIONS
Rosemount 2051 Product Data Sheet PERFORMANCE SPECIFICATIONS Specifications For zero based spans, reference conditions, silicone oil fill, SST materials, Coplanar flange () or 1 /2 in. - 14 NPT () process
Details of Option Specification Code - D012
Specification : D012 Title: Gasket 1/5 Asbestos gaskets cannot be used after 26 April, 2004. Model No. of gasket shall be specified. Precautions for use of metal gaskets Material shall be 304 or better
LEADING THE WAY IN WELLHEAD AND PIPELINE TECHNOLOGY. Wellheads Christmas Trees Gate Valves Surface Safety Valves Frac Trees Check Valves
LEADING THE WAY IN WELLHEAD AND PIPELINE TECHNOLOGY Wellheads Christmas Trees Gate Valves Surface Safety Valves Frac Trees Check Valves OUR Stream-Flo Industries Ltd. is committed to provide premium quality
EN 1092 PN 10 EN 1092 PN 16 JIS B K ANSI B16.5 Class 150 ANSI B16.47 Class 150 BS 10 Table D
HG EN 1092 PN 10 EN 1092 PN 16 JIS 2238 10K ANSI 16.5 Class 150 ANSI 16.47 Class 150 S 10 Table D Stafsjö s knife gate valve HG is a bi-directional valve, particularly well suited for severe operating
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS VELT ELECTRIC TRI-LEG FLOOR MOUNTED TILTING 2/3 JACKETED KETTLES MODEL VELT20 VELT30 VELT40 VELT60 VELT80 VELT100 ML-103442 ML-103443 ML-103444 ML-103445 ML-103446 ML-052999
Lengths [7] Ø.50 [13] [7] [13]
![Lengths [7] Ø.50 [13] [7] [13]](/thumbs/80/81567338.jpg "Lengths [7] Ø.50 [13] [7] [13]")
Dimensions in [ ] are in millimeters Standard (2 1 / 2 6 ) Standard (9 24 ).75 STEM.40 [10] EXTERNAL THREAD.61 [15] 1.00 [25] STEM STEM Ø.44 [11] Threaded-Stepped Shank Standard Stem Length Length (T)
COMPREHENSIVE VALVE OFFERINGS AND AUTOMATION SERVICES
COMPREHENSIVE VALVE OFFERINGS AND AUTOMATION SERVICES Edgen Murray is a global stocking distributor for reputable and quality valve and valve automation brands. With over 30 years of valve experience,
25000 Series Lo-T TM Butterfly Control Valve Instructions
November 2001 25000 Series Lo-T TM Butterfly Control Valve Instructions Instruction No. 25.1:IM PRELIMINARY STEPS Before installation, note the flow direction arrow on the valve body. The flow should enter
INSPECTION REPORT N o
Page: 1/11 PROJECT: TPI for Stud, bolt, nut and washer Ref: INS/SH-16/0074 BV Client: Simgetek Manufacturing and Engineering Co. Lnc Supplier: Jiaxing Haina Fastener Co., Ltd P/o nr: N/A (client to BV)
SECTION DOMESTIC WATER AND SANITARY DRAINAGE PIPING PART 1 GENERAL
15140.1 SECTION 15140 DOMESTIC WATER AND SANITARY DRAINAGE PIPING PART 1 GENERAL 1.1 SECTION INCLUDES A. Furnish and install sanitary drainage and vent piping systems, and domestic water piping, including
Proven technology for individual valve solutions worldwide TRUNNION MOUNTED BALL VALVES API 6D - API 6DSS - API 6A MANUAL- MOV- ESDV TBV-1003
GWC Italia Proven technology for individual valve solutions worldwide TRUNNION MOUNTED BALL VALVES API 6D - API 6DSS - API 6A MANUAL- MOV- ESDV TBV-1003 1 GWC ITALIA Proven technology for individual valve
Emission-Pak Assemblies
Emission-Pak Assemblies 25, 35 and 45 Installation, Maintenance and Operating Instructions IMO-266 EN 11/2017 2 IMO-266 EN TABLE OF CONTENTS 1. GENERAL... 3 2. INSTALLATION... 3 2.1 Installation Into Pipeline...
Riser Extension INSTALLATION GUIDE 40100AX35 / 40100AX18. Manual 40100X35-8
Riser Extension INSTALLATION GUIDE 40100AX35 / 40100AX18 Manual 40100X35-8 3 2 4 Access covers with bolts supplied with Interceptor 1 5 14 6 11 15 Sampling Port/Cleanout cap supplied with Interceptor 12
Before demand beyond supply
Before demand beyond supply Medium & high-pressure valves in accordance with ASME, EN, BS and API 2 The company and its history The history of HP Valves goes back as far as 1879 when Dikkers Hengelo began
Strainers. Basket Strainers Navy Pump Strainers Raw Water Strainers Scoop Strainers Low Profile Intake Strainers...
Strainers Basket Strainers...102-103 Raw Water Strainers...104 Low Profile Intake Strainers...105 Rectangular Scoop Strainers...106-107 Positive Flow Scoop Strainers...106-107 Navy Pump Strainers...108
Meter, PD Series JB10-S6, S7
PARTS LIST MEASUREMENT SOLUTIONS Meter, PD Series JB10-S6, S7 Bulletin PO01020 Issue/Rev. 0.1 (7/14) We put you first. And keep you ahead. 2 Bulletin PO01020 Issue/Rev. 0.1 (7/14) Inner Mechanism Item
PARTS LIST. Model MFT-HD Cleco
PARTS LIST Model MFT-HD Cleco 0 0 0 0 0 0 0 0 HD-0- Centershaft HD-0- Centershaft Screw HD-0- Lift Collar HD-0- Eyebolt HD-0- Hex Nut HD-0- Draw Rod HD-0- Washer - Draw Rod HD-0- Face Plate, " Diameter
Figure 3. 1 ½ Nutating Disc with R-10 register
Principle of Operation Liquid enters a precision-machined chamber containing a disc which nutates (wobbles). The position of the disc divides the chamber into compartments containing an exact volume. Liquid
YONGJIA NSV VALVE CO.,LTD. GATE, GLOBE & CHECK VALVES ASSEMBLY & MAINTENANCE PROCEDURES
YONGJIA NSV VALVE CO.,LTD. GATE, GLOBE & CHECK VALVES ASSEMBLY & MAINTENANCE PROCEDURES 1. Features of Construction & Operation GATE VALVE Gate Valve comprises of taper wedge, situated in between two-body
Important Notices. Manway Lockout Point
2 Drawing CM-1B Important Notices 1. We palletize all manways to avoid damage during shipment and subsequent handling at the jobsite. We suggest that the manway remain on the pallet until installation.
PLASTIC BALLCOCK Includes: Vinyl Refill Tube, Float Rod, Flange Nut, Washer, 5/8 or 1/2 Coupling Nut and Water Level Adjustable Screw.
Flush Valves PLASTIC BALLCOCK Includes: Vinyl Refill Tube, Float Rod, Flange Nut, Washer, 5/8 or 1/2 Coupling Nut and Water Level Adjustable Screw. Toilet Flappers 51005 10 Anti siphon 5 50 6.25 P51005
University of Rochester Design Standard August 13, 2014
University of Rochester Design Standard August 13, 2014 330000-Utility Metering Standard 1) General a) Project Engineer of Record shall submit peak building load projections to facilitate meter sizing
GENERAL PROVISIONS OF THE SPECIFICATIONS MATERIAL SPECIFICATIONS LIST
GENERAL PROVISIONS OF THE SPECIFICATIONS MATERIAL SPECIFICATIONS LIST 1a. PIPE (PVCO): P.W. Eagle 200 PSI in accordance with AWWA C909. Use class 200 unless otherwise approved. Water Pipe Main Diameter
BP Brine Pro Brine Maker. Parts List. This Parts List is for BP-2000 brine makers with serial numbers beginning with and higher.
November, 0 Lit. No., Rev. 0 BP-000 Brine Pro Brine Maker Parts List This Parts List is for BP-000 brine makers with serial numbers beginning with 00 and higher. A DIVISION OF DOUGLAS DYNAMICS, LLC FRAME
BAR STOCK 1-PC BALL VALVE SCREWED END TO BS21, ANSI B2.1 MODEL: BV-45C 2-PC INVESTMENT CASTING BALL VALVE BALL VALVE FULL PORT 1000 WOG/PN63.
BAR STOCK 1-PC DIN-259. REDUCING BORE. 800 WOG. BODY: AISI 316 / AISI 304 BAR STOCK 1-PC DIN-259. REDUCING BORE. 800 WOG. BODY: CARBON STEEL S45C 1-PC INVESTMENT CASTING HEXAGON TYPE REDUCING BORE 1000
FLOAT OPERATED LEVEL CONTROLLER
ELECTRONIC LEVEL SWITCH (HORIZONTAL) APPLICATIONS: Senses a specific liquid level and produces electric output. High or low level control. Electric output can activate alarms, solenoid valves or other
KEEP YOUR RESOURCE MOVING.
LINER BOLTS KEEP YOUR RESOURCE MOVING. COLUMBUS McKINNON CORPORATION Leading the Industry Downtime in the grinding mill operation is caused by one of two things: regularly scheduled maintenance or unscheduled
Sample Specification
POWERS FASTENERS Sample Specification Section 22 10 xx Plumbing Piping The intent of this Sample Specification is to illustrate the use of ICC ES Acceptance Criteria as reference standards in the proper
Section Heavy Duty Slide Gates Tender No. [ ] Page 1
![Section Heavy Duty Slide Gates Tender No. [ ] Page 1](/thumbs/84/90845067.jpg "Section Heavy Duty Slide Gates Tender No. [ ] Page 1")
Tender No. [ ] Page 1 1.0 GENERAL 1.1 REFERENCES.1 Provide heavy duty slide gates in accordance with the following standards (latest revision) except where specified otherwise..2 American Society for Testing
Installation, Maintenance and Operating Instructions
Emission-Pak ASSEMBLY CARTRIDGES A, B AND C MODEL B FOR: 1/2 2 (DN 15 50) SERIES 5150 1/2 2 (DN 15 50) SERIES 5300 AND 530S 3/4 1-1/2 (DN 20 40) SERIES 6150 3/4 1-1/2 (DN 20 40) SERIES 6300 2 (DN 50) SERIES
SPECIFICATION: ALUMINUM SLIDE GATES
SPECIFICATION: ALUMINUM SLIDE GATES PART 1 GENERAL 1.1 The Slide gates shall be manufactured from Aluminum material as specified and shall be Flange back type suitable for wall thimble mounting and generally
BONOMI NORTH AMERICA SERIES 500N - 500S
BOI RTH AERICA SERIES 500N - 500S NYON COATED DISC CF SS DISC anually operated butterfly valves. Epoxy coated cast iron wafer body. Full port sizes / to. EPD resilient seat -0 F to 50 F. API609 face to
FIELD DEVICES PRESSURE
FIELD DEVICES PRESSURE Product Specifications Models 11GM and 11GH Pneumatic Transmitters for Gauge Pressure Measurement 11GM TRANSMITTER 11GH TRANSMITTER The Foxboro brand Models 11GM and 11GH Transmitters
STANDARD PHRASEOLOGY SECTION G. 1. This section of standard phraseology is for general use in piping disciplines.
STANDARD PHRASEOLOGY SECTION G 1. This section of standard phraseology is for general use in piping disciplines. Hydrostatically test, using at PSIG for a minimum of minutes. Allowable leakage: None. G1
Hilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2012 Hilti North American MI/MQ Technical Guide Volume 3. For complete details on this product, including data development, general suitability, installation, and corrosion
Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard
Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard 5. Input Cover 6. O-Ring 7. Hex Head Cap Screw 8. Input