MOTORIZED VALVES SHANGHAI INJOY INDUSTRY CO.,LTD.
|
|
- Natalie Anthony
- 5 years ago
- Views:
Transcription
1 MOTORIZED VALVES SHANGHAI INJOY INDUSTRY O.,LTD.
2 MOTORIZED VALVE Ball Butterfly PAGE 1 Motorized heck Globe Gate Knife Gate M Series EAB Series Electric Actuator EAH Series H Series KE Series! Specialize In Fluid ontrols & Industrial Automation
3 MOTORIZED VALVE Motorized s Specification ustomer No. Liquid Design TAG No. Viscosity Project Model Different Pressure ontract Qty. ompress rate Date Pipe Size ritical Pressure Series Model Type Pressure Electric Actuator Torque Safety Factor Travelling Voltage urrent Input Signal onnection Body Trin(Seat) Plug(Stem) Other's Flow PAGE 2 Ouput Signal Feedback Signal ontrol ircult Protection EX-Proof Remark: Temperature Leakage lass sales@injoyindustry.com
4 MOTORIZED VALVE Operation ondition Output Range Supply Power Protection Turning Angle Installation Angle Working Temp Nm D, 1 Phase A, Phase A IP68 (Weather Proof) 0 90 (option: 0 60 ) 60 at any angle A TYPE B TYPE Standard type Structure: 1 unit limit switch Passive signal feedback Structure: 2 units limit switch PAGE TYPE Resistance signal feedback Structure: with 500 or 1K potentiometer ontrol type D TYPE E TYPE F TYPE G TYPE H TYPE Resistance signal feedback and Passive singal feedback Structure: with potentiometer and 2 units limit switch Modulating, output singal:4-20ma Structure: with potentiometer and servo controller With position transmitter,output signal:4-20ma Structure: with potentiometer and position transmitter D current control Structure: with intermediate position switch phase A power control and Passive singal feedback Structure: with intermediate position switch Specialize In Fluid ontrols & Industrial Automation
5 MOTORIZED VALVE ontrol Type ircuit ircuit A: Standard type Function: The opening or closing operation is realized by A switching volume, and outputs a group of full open or full closed active position signals. M MIXED OLOUR OLS FR BROWN BLUE STOP Full-open indication Full-close indication OPEN 2 1 LOSE A ircult B: Passive signal feedback Function: The opening or close operation is realized by A switching volume, and outputs a group of corresponding full open or full close position with passive contact Structure: 2 units limit switch M XS OXS OLS FR RED BROWN BLUE Full-close signal Full-open signal OM Open STOP lose A PAGE 4 ircult : Resistance signal feedback Function: The opening is controlled by switching volume, and continously output resistant signals corresponding to opening positions. Structure: with 500Ω or 1KΩ potentiometer M 1K OLS FR RED BLUE STOP Open lose A ircult D: Resistance signal feedback and Passive signal feedback Function: The opening operation is controlled by switching volume, and continously outputs resistant signals corresponding to opening positions and at the same time a group of corresponding full-open and full-closed passive contact signals. Structure: with potentiometer and 2 units limit switch M 1K XS OXS OLS FR 9 RED Full-close signal RED 5 Full-open signal BROWN 4 OM Open BLUE STOP 2 lose A 1 sales@injoyindustry.com
6 MOTORIZED VALVE ontrol Type ircuit ircult E: Modulating type, output singal:4-20ma Function: The opening adjustment is realized by inputting an analog singal of 4-20mA D / 1-5VD externally, and continously outputs a position singal of 4-20mA D. Structure: with potentiometer and servo controller M 1K OLS FR RED BLUE Servo-controller L N Output signal Input signal A PAGE 5 ircult F: With position transmitter, output singal:4-20ma Function: The opening operation is controlled by external A switching volume, and continously outputs a position singal of 4-20mA D. Structure: with potentiometer and position transmitter ircult G: D current control Function: The opening or closing operation can be controlled by D switching volum output from the exchange of the positive polarity and the negative polarity of external D power supply and output a group of corresponding full open or full-close passive contact signals. Structure: with intermediate position switch M 1K OLS FR XS OXS OLS M RED BLUE MIXED OLOR FR RED BLUE GREY (-) RED(+) Position Transmitter BROWN Output signal - 5 L N Full-close signal Full-open signal OM STOP Open KM KMO STOP KM KMO KM KMO lose Open lose D A ircult H: phase A power control and Passive singal feedback Function: The opening or closing operation can be controlled by ph A switching volum output from external phase-reversing circuit, and outputs a group of corresponding full-open or full-close passive contact signal. Structure: with intermediate position switch 10 MIXED OLOR 9 Full-close signal XS RED 8 Full-open signal OXS BROWN 7 OM OLS 6 BLUE KMO KM SB2 5 KM KMO FR 4 GREY GREEN M 2 KMO 1 RED KM SB1 KMO KM FU SB N W V U Specialize In Fluid ontrols & Industrial Automation
7 MOTORIZED BUTTERFLY VALVE PAGE 6 Main Data Electric Actuator Standard Pressure API609, API594, Mss SP-67, ASME16.5, AWWA, ISO 5752, KSV 7490, JIS F 7480, JIS B 202, JIS B 2064,API609, BS5155 ANSI 125LB/150LB KS/JIS 5K/10K/16K/20K BS/DIN/ISO PN6/PN10/PN16/PN25/PN40 Working Temp Depend on Seat performance Standard Voltage Protection JB/T , MILITARY EQUIPMENT GJB D, 1 Phase A, Phase A IP68 (Weather Proof) sales@injoyindustry.com
8 MOTORIZED BUTTERFLY VALVE Dimension of Wafer onnection Butterfly Actuator sketch for 2 valve 1 Body GG25/GG40 2 Seat EPDM/NBR Disc SS04/ GGG40 4 Shaft SS416/SS04 5 Bushing PTFE 6 O-Ring NBR Working Pressure: PN10/16 Fitting between flange:din ANSI PAGE 7 Model Actuator A B PN10 PN16 L MVW-50 2" EAH MVW-80 " EAH MVW-100 4" EAH MVW-125 5" EAH MVW-150 6" EAH MVW-200 8" EAH MVW " EAH MVW-00 12" EAH Stub GG25/GG40 2 Body GG25/GG40 Seat EPDM/NBR 4 Disc SS04/ GGG40 5 Shaft SS416/SS04 6 Taperpin SS16 7 Bushing PTFE 8 O-Ring NBR Working Pressure: PN10/16 Fitting between flange:din ANSI Model Actuator A B PN10 PN16 L MVW-50 14" EAH MVW " EAH MVW " EAH Specialize In Fluid ontrols & Industrial Automation
9 MOTORIZED 2 P BALL VALVE - FULL BORE - PN64 (1000WOG) Standard Design ASME B16.4, MSS SP-110, API608 Thread ANSI B , BS 21/2779, DIN 259/2999, ISO228, JIS B020 Face to Face DIN 202-M Wall Thickness EN Inspection & Testing MSS SP-110, API598, EN Main Part List Main Part of Material Regular Optional Body SS16 SS04 Ball SS16 SS04 ap SS16 SS04 Seat PTFE RTFE O Ring Viton Dimension Blow-out Proof Stem Anti-Static Device for Ball-Stem-Body Pressure Balance Hole in Ball Slot D D PAGE 8 Model Actuator L L2 D H MVB2T-6 1/4" EAM MVB2T-10 /8" EAM MVB2T-15 1/2" EAM Model Actuator L L2 D H MVB2T-20 /4" EAH MVB2T-25 1" EAH MVB2T-2 1-1/4" EAH MVB2T /2" EAH MVB2T-50 2" EAH MVB2T /2" EAH MVB2T-80 " EAH sales@injoyindustry.com
10 MOTORIZED P BALL VALVE - FULL BORE - PN64 (1000WOG) PAGE 9 Blow-out Proof Stem Anti-Static Device for Ball-Stem-Body Pressure Balance Hole in Ball Slot Pre-Load 2 Belleville Washers to Self- adjust Packing Dimension Standard Design Wall Thickness Thread Main Part List ASME B16.4, MSS SP-110, API608 EN ANSI B , BS 21/2779, DIN 259/2999, ISO228, JIS B020 Butt-Weld ASME B16.25 (SH 10,20,40) Socket Weld ASME B16.11 ASME B16.5 LASS 150/00 Flange End DIN 265 PN10-PN40 JIS B228 10K/20K Inspection & Testing MSS SP-110, API598, EN Main Part of Material Regular Optional Body SS16 SS04 Ball SS16 SS04 ap SS16 SS04 Seat PTFE RTFE O Ring Viton Model Actuator L L2 D H MVBT-6 1/4" EAM MVBT-10 /8" EAM MVBT-15 1/2" EAM Model Actuator L L2 D H MVBT-20 /4" EAH MVBT-25 1" EAH MVBT-2 1-1/4" EAH MVBT /2" EAH MVBT-50 2" EAH MVBT /2" EAH MVBT-80 " EAH Specialize In Fluid ontrols & Industrial Automation
11 MOTORIZED WAY BALL VALVE - PN16 / 25 / 40 Standard Design Thread Main Part List Dimension ASME B16.4, API608 ANSI B , BS 21/2779, DIN 259/2999, ISO228, JIS B020 Wall Thickness EN12516-,ASME lass 400 Butt-Weld ASME B16.25 (SH 10,20,40) Socket Weld ASME B16.11 ASME B16.5 LASS 150/00 Flange End DIN 265 PN10-PN40 JIS B228 10K/20K Inspection & Testing MSS SP-110, API598, EN Main Part of Material Regular Optional Body SS16 SS04 Ball SS16 SS04 ap SS16 SS04 Seat PTFE RTFE O Ring Viton Blow-out Proof Stem Anti-Static Device for Ball-Stem-Body Pressure Balance Hole in Ball Slot PAGE 10 Model Actuator L L2 D H MVBW-6 1/4" EAM MVBW-10 /8" EAM MVBW-15 1/2" EAM MVBW-20 /4" EAM Model Actuator L L2 D H MVBW-25 1" EAH MVBW-2 1-1/4" EAH MVBW /2" EAH MVBW-50 2" EAH sales@injoyindustry.com
12 MOTORIZED 2 P FLANGE END BALL VALVE - FULL BORE - PN10/16/25/40 PAGE 11 Standard Design ASME B16.4, API608, EN Fire Safe API607, ISO10497 Wall Thickness EN , ASME B16.4 Flange End DIN 265 PN10-PN40 Socket Weld ASME B16.11 Inspection & Testing API598, API6D, EN Main Part List Main Part of Material Regular Optional Body SS16 SS04 Ball SS16 SS04 ap SS16 SS04 Seat PTFE RTFE O Ring Viton Blow-out Proof Stem Pressure Balance Hole in Ball Slot Anti-Static Device for Ball-Stem-Body Pre-Load 2 Belleville Washers to Self adjust Packing Electric Actuator Driven Specialize In Fluid ontrols & Industrial Automation
13 MOTORIZED 2 P FLANGE END BALL VALVE - FULL BORE - PN10/16/25/40 Dimension d D1 D2 D d D1 D2 D H H t T L Model:MVBF15-20 d1 L d1 t T Model:MVBF Model Actuator L H T t d D1 D2 D MVBF15 1/2" EAM MVBF20 /4" EAM MVBF25 1" EAH MVBF2 1-1/4" EAH MVBF40 1-1/2" EAH MVBF50 2" EAH MVBF65 2-1/2" EAH (PN10/16) 22(PN25/40) MVBF80 " EAH (PN10/16) 24(PN25/40) MVBF100 MVBF125 MVBF150 4" 5" 6" EAH400 EAH400 EAH (PN10/16) 158(PN10/16) 180(PN10/16) 220(PN10/16) (PN25/40) 162(PN25/40) 190(PN25/40) 25(PN25/40) 22(PN10/16) 210(PN10/16) 250(PN10/16) (PN25/40) 220(PN25/40) 270(PN25/40) 22(PN10/16) 212(PN10/16) 240(PN10/16) 285(PN10/16) (PN25/40) 218(PN25/40) 250(PN25/40) 00(PN25/40) 24(PN10) 268(PN10) 295(PN10) 40(PN10) MVBF200 8" EAH (PN16) 278(PN16) 10(PN16) 60(PN16) 200 4(PN25) 285(PN25) 20(PN25) 75(PN25) 4(PN40) 285(PN40) 20(PN40) 75(PN40) PAGE 12 sales@injoyindustry.com
14 Add: rd Floor, No.29 Unit, No.689 Luofeng Rd, Shanghai , hina Tel: Fax: Http:
CHINA ZHEJIANG ZHONGGONG VALVE GROUP CO,.LTD FORMEN VALVE
INTERNATIONAL SALES: FORMEN VALVE ADD: OUBEI TOWN, YONGJIA COUNTY, WENZHOU, ZHEJIANG, CHINA HEADQUARTER: ZHEJIANG ZHONGGONG VALVE GROUP ADD: WUXING INDUSTRY ZONE, OUBEI TOWN, WENZHOU, CHINA ABOUT US Formen
More informationEN 1092 PN 10 EN 1092 PN 16 JIS B K ANSI B16.5 Class 150 ANSI B16.47 Class 150 BS 10 Table D
HG EN 1092 PN 10 EN 1092 PN 16 JIS 2238 10K ANSI 16.5 Class 150 ANSI 16.47 Class 150 S 10 Table D Stafsjö s knife gate valve HG is a bi-directional valve, particularly well suited for severe operating
More informationHow to Identify a PBM VALVE SERIES
How to Identify a PBM VALVE SERIES Series 0 (SP, DP, MP) 1. If it is a manual valve, the handle generally would be made of a cast iron or cast bronze. 2. If it is a manual valve, the stem at the very top
More informationw w w.fastwell.in CATALOG NUMBER FFI -1005
A trusted name in industrial valve company CATALOG NUMBER FFI -1005 Fastwell Fitting Industries is headquartered in Bakersfeld, California. We are a global manufacturer and supplier of valves to Oil &
More informationThis specification describes the minimum requirements for piping systems for the following service:
SPEC-3004 1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Water Design Conditions Operating Conditions 10 PSIG @ 33 o F to
More information4CONTROL VALVES CONTROL VALVES ULTRAFLO BUTTERFLY VALVES 522 SERIES NEW! H2X E2X KMSC-0 SPECIFICATIONS
SERIES DESRIPTION The Series resilient seated butterfly valves are available in "-0" sizes. Economical and designed to meet todayʼs HV and industrial process requirements, they come standard with full
More informationM1 series 2 way ball valve with integrated Praher Labeling System
General: Material: PVC-U Seal material: EPDM / FPM Ball seating joint: PTFE Dimensions: DN10 DN50 d16 d63 d3/8 d2 Connection types: Solvent socket DIN / ASTM / JIS Solvent spigot DIN Threaded socket BSP
More information.1 Materials and installation for steel piping, valves and fittings for hydronic systems in building services piping..2 Related Sections.
Issued 2006/08/01 Section 15183 Hydronic Systems: Steel Page 1 of 6 PART 1 GENERAL 1.1 SUMMARY.1 Section Includes..1 Materials and installation for steel piping, valves and fittings for hydronic systems
More informationSeries 4000 Model B 3-Piece Ball Valves with ISO Bonnet
Series 4000 Model B 3-Piece Ball Valves with ISO Bonnet 1/2" 2" (DN 15 50) Standard Bore, 1/2" 1-1/2" (DN 15 40) Full Bore Installation, Maintenance and Operating Instructions IMO-210EN 5/2011 2 IMO-XXX
More informationSeries 4000 Model B 3-Piece Ball Valves with ISO Bonnet
Series 4000 Model B 3-Piece Ball Valves with ISO Bonnet 1/2 2 (DN 15 50) Standard Bore, 1/2 1-1/2 (DN 15 40) Full Bore Installation, Maintenance and Operating Instructions IMO-210 EN 1/2018 2 IMO-210 EN
More informationGWC Italia. Proven technology for individual valve solutions worldwide. pb-1009
GWC Italia Proven technology for individual valve solutions worldwide pb-1009 GWC ITALIA Proven technology for individual valve solutions worldwide GWC Italia Worldwide Network italy group HEADQUARTERS,
More informationBONOMI NORTH AMERICA SERIES 500N - 500S
BOI RTH AERICA SERIES 500N - 500S NYON COATED DISC CF SS DISC anually operated butterfly valves. Epoxy coated cast iron wafer body. Full port sizes / to. EPD resilient seat -0 F to 50 F. API609 face to
More informationMagnetic level indicators made in Australia under licence to Weka AG of Switzerland.
ABN 24 080 175 293 PO Box 212 Caringbah NSW 1495 Sydney Australia ph: +61 (0)2 9542 8977 fx: +61 (0)2 9542 7978 www.controlcomponents.com.au Magnetic level indicators made in Australia under licence to
More informationThis specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface.
SPEC-3500 1/9 1.0 PURPOSE This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. Note: This specification does
More informationThis specification describes the minimum requirements for piping systems for the following service:
201/01/13 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Air Design Conditions Operating Conditions Blast Air (see Note 1)
More informationF6125HD, 2-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc
6125H, 2-Way utterfly Valve Resilient Seat, 304 Stainless Steel isc Product eatures 200 psi (2 to 12 ) and 150 psi (14 to 24 ) 0% leakage, Long stem design allows for 2 insulation, Valve face-to-face dimensions
More informationThis specification describes the minimum requirements for piping systems for the following service:
SPEC-3501 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Instrument Air Design Conditions 150 PSIG @ 180 F Operating Conditions 125
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for successful
More informationTarget disk flowmeter for liquids and gases
Target disk flowmeter for liquids and gases Metallic, simple and robust construction Available for all flow directions Suitable for extreme pressure and temperature conditions Low pressure drop Straight
More informationElectric Actuator. of innovated design. Introducing KIMAX CONTROLS INC. > Patented switch of manual & Motor operation. Clutchless manualoverride.
CONTROLS INC. Introducing KIMAX CONTROLS INC. Kimax Taiwan : 5F-10,No.3, Lane 2, First Industrial Rd., Taichung Taiwan, 40767 Tel:886-4-23507533 Fax:886-4-23507531 E-mail:eric-shia@kimax.com.tw Kimax China
More informationAMRI is ISO 9001 approved. Direct 1/4 turn electric actuators ACTELEC 3, 6, 12, 25, 50, 100 and 150 Output torques up to 1500 Nm
Technical leaflet 8521.11--10 ACTELEC 3 to 1600 Direct 1/4 turn ACTELEC 3, 6, 12, 25, 50, 100 and 150 Output torques up to 1500 Nm Direct 1/4 turn actuator Actuator with multi -turn servomotor associated
More informationSAMAMAT FLOW CONTROL L.L.C.
SAMAMAT FLOW CONTROL L.L.C. SFC-MK-LS-001 Rev.: 03 COMPANY PROFILE Company Location Company Information Company Size Nearest Transportation Company Name SAMAMAT FLOW CONTROL L.L.C Company Address Plot
More informationF780HD, 3, 3-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc
F80HD, 3, 3-Way utterfly Valve Resilient Seat, 304 Stainless Steel Disc pplication Valve is designed for use in NSI flanged piping systems to meet the needs of bi-directional high flow HV hydronic applications
More informationProportional Directional Control Valves Nominal sizes 16 and 25
Proportional Directional Control Valves Nominal sizes 16 and 25 Pilot operated, electrically adjustable Interface acc. to DIN 24 340 and ISO 4401 PN [p max. ] = 315 bar 7502968.06.01.06 Description Design
More informationF650HD, 2-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc
650H, -Way utterfly Valve Resilient Seat, 304 Stainless Steel isc Product eatures 00 psi ( to ) and 50 psi (4 to 4 ) 0% leakage, Long stem design allows for insulation, Valve face-to-face dimensions comply
More informationProportional Directional Control Valves Size 6
Proportional Directional Control Valves Size 6 Direct controlled, electrically adjustable Interface to DIN 2 30 and ISO 0 PN [p max. ] = 35 bar 750055.06.02.06 Description (standard units) Design The proportional
More informationF6100HD, 2-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc
6100H, 2-Way utterfly Valve Resilient Seat, 304 Stainless Steel isc Product eatures 200 psi (2 to 12 ) and 150 psi (14 to 24 ) 0% leakage, Long stem design allows for 2 insulation, Valve face-to-face dimensions
More informationW-K-M Model MA-1 DynaCentric Butterfly Valve
Page 1 of 16 R E P A I R M A N U A L W-K-M Model MA-1 DynaCentric Butterfly Valve Page 2 of 16 Published October 2001 W-K-M and DynaCentric are trademarks of Cooper Cameron Corporation Cooper Cameron Corporation,
More informationF680HD, 2-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc
680H, 2-Way utterfly Valve Resilient Seat, 304 Stainless Steel isc Product eatures 200 psi (2 to 12 ) and 150 psi (14 to 24 ) 0% leakage, Long stem design allows for 2 insulation, Valve face-to-face dimensions
More informationF6100HD, 4, 2-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc
6100H, 4, 2-Way utterfly Valve Resilient Seat, 304 Stainless Steel isc pplication Valve is designed for use in NSI flanged piping systems to meet the needs of bi-directional high flow HV hydronic applications
More informationLevel gauges Series LT Level indicator, switch and transmitter for liquids
Level gauges Series LT Level indicator, switch and transmitter for liquids Simple construction Resistant under extreme temperature and pressure conditions No risk of leakage Excellent chemical resistance
More informationValve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator ANSI version Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam
More informationMounting Instructions For 3-Piece Namur Style Mounting Bracket To 2-Way 60 Series Valves
Mounting Instructions For 3-Piece Namur Style Mounting Bracket To 2-Way 60 Series Valves NOTE: These instructions apply only to 60 series ball valves with bodies containing external mounting nibs. External
More information1/2 2 (DN 15 50) Standard Bore Series /2 1-1/2 (DN 15 40) Full Bore Series 9000 Flanged Ball Valves with ISO Bonnet
1/2 2 (DN 15 50) Standard Bore Series 7000 1/2 1-1/2 (DN 15 40) Full Bore Series 9000 Flanged Ball Valves with ISO Bonnet Installation, Maintenance and Operating Instructions IMO-214 EN 1/2018 2 IMO-214
More informationThis specification describes the minimum requirements for piping systems for the following service:
201/11/2 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Underground Service Water Note: This specification does not apply to piping
More informationANSI ORIFICE FLANGES METAL-KOREA
METAL-KOREA ANSI ORIFICE FLANGES ORIFICE FLANGES are widely used in conjunction with orifice meters for measuring the rate of flow of liquids and gases. They are basically the same as standard welding
More informationLF (Large Flange) Fittings - Adapters. (505)
LF (Large ) Fittings - dapters www.idealvac.com (505)72-007 Vacuum Fittings - dapters - olt Sets LF (Large ) ISO NW LF Specifications Max. Positive Pressure over pressure centering ring 0 psig Torque Rating
More informationInstallation, Maintenance and Operating Instructions
Emission-Pak ASSEMBLY CARTRIDGES A, B AND C MODEL B FOR: 1/2 2 (DN 15 50) SERIES 5150 1/2 2 (DN 15 50) SERIES 5300 AND 530S 3/4 1-1/2 (DN 20 40) SERIES 6150 3/4 1-1/2 (DN 20 40) SERIES 6300 2 (DN 50) SERIES
More information25000 Series Lo-T TM Butterfly Control Valve Instructions
November 2001 25000 Series Lo-T TM Butterfly Control Valve Instructions Instruction No. 25.1:IM PRELIMINARY STEPS Before installation, note the flow direction arrow on the valve body. The flow should enter
More informationExplosion proof rotary actuator - On/Off or programmable regulating actuator
Explosion proof rotary actuator - On/Off or programmable regulating actuator Direct mounting for quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Type 3004 can
More informationQUALITY ASSURANCE SPECIFICATION
Page 1 of 8 QAS: 2.02 QUALITY ASSURANCE SPECIFICATION REVISION: 0 DATE: 08/29/14 MATERIAL PURCHASING Code Material Purchase Specification for Pipe, Valves, Fitting, and Flanges PAGE 1 OF 8 1.0 Purpose
More informationLimit switch set BOA-H DN PN 16/25 Material variant EN-GJS LT
Assembly instructions 0570.812/04-EN Limit switch set BOA-H DN 15-150 PN 16/25 Material variant EN-GJS-400-18-LT Fig. 1 Exploded view of limit switch set... 2 Fig. 2 Parts list for limit switch set...
More informationCompact Motorized Actuator
Compact Motorized Using the superior characteristics of the best selling ELMY butterfly valve actuator, we developed an improved successor, the. With a replaceable control circuit board, tough metal gears,
More informationCheck valve type RK and RB
Check valve type RK and RB Product documentation Screw-in valve Operating pressure pmax: Flow rate Qmax: 700 bar 620 lpm D 7445 02-2017-3.1 by HAWE Hydraulik SE. The reproduction and distribution of this
More informationRADAR TRANSMITTERS BLISSFLEX 1100 SELECTION GUIDE. The characters of the order code have been described below
BLISSFLEX 1100 The characters of the order code have been described below BA25 4 BLISSFLEX 1100 C 2-wire loop-powered 4...20 ma Guided Radar (TDR) level meter: -50...+100 C and -1...16 barg / -58...212
More informationred rooster REV. TCR500 / TCR 1000 Link Plate 2TE Air Trolley (2TE/AT/4) DESCRIPTION Air Hoist PART NUMBER DRG TCR 1000 DRG
ITEM QTY PART NUMBER DRG 5- TCR DRG 5- DESCRIPTION TE Air Trolley (TE/AT/) Air TCR5 / TCR Link Plate TE and Trolley 6/6/ - 6kg Title of project Material Weight REV. Designed by Checked by Approved by B.
More informationThe transducer component converts the measured signal and displays the actual value.
Digital inductive conductivity transmitter System Integration Provides low Total Cost of Ownership PEEK/PPA version for CIP applications TEACH IN and SIMULATION Function Approval PVDF Version PEEK Version
More informationDigital conductivity transmitter
Digital conductivity transmitter Compact version with integrated conductivity electrodes Remote version with seperated transmitter for short (15 ft.) or long (1500 ft.) distance Commissioning is easy due
More informationApplication for design registration
Avis au lecteur sur l accessibilité : Ce document est conforme au standard du gouvernement du Québec SGQRI 008-02 afin d être accessible à toute personne handicapée ou non. Toutes les notices entre accolades
More informationU5300 Industrial Pressure Transducer
Superior Accuracy and Total Error Band Instrument Grade CE Compliant Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber Weatherproof Gage, Sealed, Absolute,
More informationStepping ahead in technology & innovation PIPING INSTITUTE OF TECHNOLOGY & ANALYSIS SOLUTIONS
Stepping ahead in technology & innovation PIPING INSTITUTE OF TECHNOLOGY & ANALYSIS SOLUTIONS PIPING ENGINEERING & PLANT DESIGN Chapter 1. Introduction of Piping Industry & Role of Piping Engineer 1.1.
More informationB6300VB-207, 3, V Ball Control Valve Carbon Steel Body, Hardened Chrome Plated, Stainless Steel Ball and Stem
6300V-207, 3, V all ontrol Valve arbon Steel ody, Hardened hrome Plated, Stainless Steel all and Stem Product eatures ast quarter turn open or closed operation, Stainless steel ball and stem, Positive
More informationLKH-110 Multi-Stage Centrifugal Pumps Sanitary version with multi voltage motor, complete unions, legs and shroud
Connections: SMS 9612-3887-01 4497 2x160 SSS 2.2 220-240D/380-420Y 9612-3887-02 4797 2x160 FSS 2.2 220-240D/380-420Y 9612-3887-03 4640 2x160 SSS 3.0 220-240D/380-420Y 9612-3887-04 4941 2x160 FSS 3.0 220-240D/380-420Y
More informationYONGJIA NSV VALVE CO.,LTD. GATE, GLOBE & CHECK VALVES ASSEMBLY & MAINTENANCE PROCEDURES
YONGJIA NSV VALVE CO.,LTD. GATE, GLOBE & CHECK VALVES ASSEMBLY & MAINTENANCE PROCEDURES 1. Features of Construction & Operation GATE VALVE Gate Valve comprises of taper wedge, situated in between two-body
More informationTarget disk flowmeters Series DP Metallic flowmeter for liquids and gases
Target disk flowmeters Series DP Metallic flowmeter for liquids and gases Metallic, simple and robust construction Available for all flow directions Suitable for extreme pressure and temperature conditions
More informationKFS. Flap-type flow meter. Design and range of application
Design and range of application The measuring device operates largely independent of viscosity and is suitable for indicating the flow rate of water, acids, alkaline solutions and gases. Every device is
More informationGeneral Information. Ball Curb Valve
General Information 1. All Jones Curb Valves are manufactured in accordance with the AWWA Standard C-800-latest revision. 1. Copper Alloy CDA No. C83600 (85-5-5-5) 2. Copper Alloy CDA No. 89520 (Low Lead)
More informationTel : +31 (0) Fax: +31 (0)
Maverick Valves BV Jan van Galenstrt 17 3115 JG Schiedam The Netherlands Tel : +31 (0)10 303 2620 Fax: +31 (0)10 303 2670 info@maverickvalves.com www.maverickvalves.com THIS DOCUMENT AND THE INFORMATION
More informationInstallation and Operating Instructions
Man.rev...0 Installation and Operating Instructions Contents : TECHNICAL DATA OPERATION, CONSTRUCTION AND PARTS LIST DIMENSIONS MOUNTING PROTECTION KITS. SPECIAL INSTRUCTIONS FOR THE SAFE USE DOCUMENTS
More informationEmission-Pak Assemblies
Emission-Pak Assemblies 25, 35 and 45 Installation, Maintenance and Operating Instructions IMO-266 EN 11/2017 2 IMO-266 EN TABLE OF CONTENTS 1. GENERAL... 3 2. INSTALLATION... 3 2.1 Installation Into Pipeline...
More informationFLOMID FX Electromagnetic Flowmeter
FLOMID FX Electromagnetic Flowmeter Working pressure manufacturing according to PED 97/23/CE (Lloyd s Register Certificate Nº 031) Introduction Modular design in two versions: Compact, sensor and electronics
More informationred rooster 2TE Air Trolley (2TE/AT/4) 2TE Air Hoist DESCRIPTION 3 1 DRG TCR 2000C2 2TE Hoist and Trolley 17/07/ kg
ITEMQTYPART NUMBER DRG 5- TCR C 3 DRG 5- DESCRIPTION TE Air Trolley (TE/AT/) TE Air Top Eye TE and Trolley 7/7/3-65kg Title of project Material Weight REV. Designed by Checked by Approved by B. Aitken
More informationRepair Manual MK40A-MK45A-MK50A MK55A-MK60A-MK65A. Ref Rev.C General Pump is a Member of The Interpump Group
MK Repair Manual MK40A-MK45A-MK50A MK55A-MK60A-MK65A General Pump is a Member of The Interpump Group 8 INDEX 1. INTRODUCTION..................................................Page 3 2. REPAIR INSTRUCTIONS...........................................Page
More informationMetal tube variable area flowmeters for gases, liquids and steam
Metal tube variable area flowmeters for gases, liquids and steam Metallic with a robust construction, optional in plastic Indication by means of magnetic coupling Linear scales, calibrated in l/h, m3/h,
More informationPlunger type Metering Pump
type Metering Pump High-precision, High-pressure Injection Now Possible Improved Seal Service Life Makes This Pump Ideal for Metering Injection of hemicals Features Stable discharge precision. High durability
More informationEdward Valves Flow Control Solutions
Edward Valves Flow Control Solutions World s leading supplier of gate, globe and check valves Proven leading supplier of critical application valves for power generation plants Experience In Motion A History
More informationCharacteristics curve Fluid: water p: 1 bar. Weight. Sectional diagram. no. [kg]
otorised valve For neutral gases and liquids G / to G female thread Cartridge system ublication 7559.06.06.97 Operating pressure -0.9 to 0 bar (see table) Catalogue index 6 0 series Description (standard
More informationFUEL GAS PIPING SECTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section.
FUEL GAS PIPING SECTION 15355 PART 1 GENERAL 1.1 DESCRIPTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section. B. This specification covers both interior and exterior
More informationMade in USA. Valves VALVES FOR INSTRUMENTATION & PROCESS SYSTEMS
Made in USA Valves VALVES FOR INSTRUMENTATION & PROESS SYSTEMS SSP Fittings orp. Table of ontents FloLok Product Overview... 3 FloLok Selection Guide... 11 Two-Way Ball Valves... 12 Three-Way Ball Valves...
More information2/2 way Proportional Valve (motordriven)
2/2 way Proportional (motordriven) Actuator isolated from fl ow path Excellent range and fast response times Low power consumption Orifi ce sizes 8 to 25 mm Versions: Standard, positioner, process controller
More informationValves. Copyright 2007 Fluor Corporation. Lesson Objective. Lesson Objective. Introduction To Valves
Copyright 2007 Fluor Corporation Valves Lesson Objective Lesson Objective Introduction To Valves Basic Types of Valves Flow Characteristics Gate Valve Relief Valve Globe Valve Horizontal Lift Check Valve
More information3-Way Ball Valves. Overview. Applications. Features & Benefits. Datasheet
3-Way Ball s Datasheet Overview 3-way Ball s are coupled with DA-Series Actuators to provide three-way mixing or diverting flow control. The ball valves are 1/4-turn rotary control valves and are available
More informationB2...VS Series, 2-way, Ball Valve Bronze Body, Stainless Steel Ball and Stem
2...VS Series, 2-way, all Valve ronze ody, Stainless Steel all and Stem Live-load packing set Stainless steel ball & stem low-out proof stem design Technical Data Media chilled or hot water, glycol, #
More informationInsertion Transducer On-line Install Instruction
LOGO Insertion Transducer On-line Install Instruction Shanghai Dynameters Co., Ltd www.dynameters.com Insertion Transducer Installation Manual Installation steps 1. Locate Installing point 2. Weld mounting
More informationCoriolis Massflowmeter
Coriolis Massflowmeter for liquids and gas measuring monitoring analysing Measuring range: 0-0.8 kg / h 0-65 000 kg / h water Accuracy: ± 0.1 of reading ±zero-point stability (liquids) pmax: PN40 tmax:
More informationMagnetic-inductive flow meter. PITe / UMF2. Technical Datasheet. Maintenance-free Nearly no pressure drop Robust design Easy installation and start-up
Magnetic-inductive flow meter Technical Datasheet PITe / UMF2 Maintenance-free Nearly no pressure drop Robust design Easy installation and start-up Subject to change without notice 1 Function An electrically
More informationRCM DIRECT READING FLOWMETER
RCM DIRECT READING FLOWMETER Flow Pressure Level Temperature measurement monitoring control Special Features Compact Design Easy to Install For Horizontal or Vertical Pipes Rugged Construction Accuracy:
More information4" (DN 100) 5RET Tank Car Fire-Tite Bottom Unloading Valves. Installation, Maintenance and Operating Instructions
4" (DN 100) 5RET Tank Car Fire-Tite Bottom Unloading Valves Installation, Maintenance and Operating Instructions IMO-R14 11/2013 2 IMO-R14 Table of Contents 1 GENERAL....................................
More informationCompact Motorized Actuator
Compact otorized Actuator Using the superior characteristics of the best selling ELY butterfly valve actuator, we developed an improved successor, the. With a replaceable control circuit board, tough metal
More informationProportional rotary solenoid G DR
Proportional rotary solenoid 6 Product group G DR Function Proportional Rotary Solenoid Linear torque vs. rotation angle characteristic Constant torque in the operating range Proportional behaviour between
More informationB350L, 3-Way, Diverting Ball Valve Chrome Plated Brass Ball and Nickel Plated Brass Stem
B350L, 3-Way, Diverting Ball Valve hrome Plated Brass Ball and Nickel Plated Brass Stem pplication This valve is typically used in air handling units on heating or cooling coils, and fan coil unit heating
More informationDesign and applications
Design and applications The measuring device operates largely independent of viscosity and is suitable for indicating the flow rate of water, acids, alkaline solutions and gases. Every device is calibrated
More informationZero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
More informationVNR- 0 VNR - I - Check Valve
Last update: 20/04/18 VNR- 0 VNR - I - Check Valve Flow regulating valve. Allows a one-way flow, preventing the back flow. Technical manual: E 201 60.2030.00 VNR-I G 1/4 FF sst Ai 303 DN8 60.2040.00 VNR-O
More informationQUALITY THROUGH EXPERIENCE-SINCE 1963
b y H a k o h a v V a l v e s P E N S T O C K S & F L A P V A L V E S by Hakohav Valves ABOUT US QUALITY RELIABILITY Kim Valves started up as Hakohav Valves in 1963 by two young visionary engineers who
More informationGeneral Specifications
General Specifications GS 77M00-0EN Models R-S, R-H, R-T, R-RT, R-LP, R-HP, R-SP, R-SY, R-PS, R-PH, R-PW, R-, R-D6 rrester [Style: S] General This high quality arrester protects electronic instruments
More informationProportional Directional Control Valves Size 6
Proportional Directional Control Valves Size 6 Direct operated, positioncontrolled Interface to DIN 2 30 and ISO 0 PN [p max. ] = 35 bar 75079.06.03.06 Description (standard units) Design The proportional
More informationDigital flow ELEMENT transmitter for continuous flow measurement
ELEMENT Transmitter Digital flow ELEMENT transmitter for continuous flow measurement Type can be combined with... PN10, DN15 to DN400 fluidic process connection Programmable outputs : one or two transistor
More informationRotary gear motor series AG8...
Rotary gear motor series AG8... The electric actuator belonging to AG8 series is designed to operate gas valves and air dampers in ventilation and air conditioning systems. The compact design and universal
More informationTS Temperature Sensor and Transducers. Product Bulletin. Wide range of mounting types and signal outputs
TS-6300 Temperature Sensor and Transducers Product Bulletin The TS-6300 series temperature sensors provide an active and passive signal that corresponds to the air or water temperature in heating, ventilating
More informationEngineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard
Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard 5. Input Cover 6. O-Ring 7. Hex Head Cap Screw 8. Input
More informationB2150VB-055, 1-1/2, V Ball Control Valve Hardened Chrome Plated Carbon Steel Body, Stainless Steel Ball and Stem
50V-055, -/, V all ontrol Valve Hardened hrome Plated arbon Steel ody, Stainless Steel all and Stem Product eatures ast quarter turn open or closed operation, Stainless steel ball and stem, Positive shut-off,
More informationM5200 Industrial Pressure Transducer
CE Compliant Wide Temperature Range Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber Weatherproof Gage, Sealed, Compound DESCRIPTION The M5200 pressure transducers
More informationSignature. Date. Surname. 30 max.
ITEM QTY PART NUMBER DRG - DRG - DRG - DRG 9- TCR DESCRIPTION Trolley Low Headroom Frame TCR / TCR Link Plate Spacer Air Hoist Title of project Date Material Weight Designed by Approved by Surname Date
More informationRadiator Valves. Product Information. It s all at Albion
Radiator Valves Product Information It s all at lbion RT 97 Thermostatic ead Lockable ead Liquid Sensor Frost Setting 6 onforms to EN2 M30 x. Standard onnection Flow nd P 0 S - K 0. 0. 0 00 2000 3000 4000
More informationBGN. All Metal Variable Area Flowmeter and Counter. for liquids and gases
All Metal Variable Area Flowmeter and Counter for liquids and gases monitoring analysing BGN Measuring range: 0.5-5.0... 13000-130000 l/h water 0.015-0.15... 240-2400 m³/h air (20 C, 1.013 bar) Accuracy
More informationStock Programme Scope of Supply. v
Scope of Supply v2.10 2018 Pipe: Seamless Stainless Steel ASTM A312 ASME B36.19 TP316/316L DN15 DN250 10S 160 Stainless Steel ASTM A312 ASME B36.19 TP304/304L DN15 DN200 10S 160 Low Temp ASTM A333 ASME
More informationS103C ELECTROMAGNETIC FLOW METERS. Main application fields MOUNTING
ELECTROMAGNETIC FLOW METERS The electromagnetic flow meter is used to measure the flow rate of conductive fluids and waste water. The measurement is independent of the density, viscosity, temperature and
More informationECT Applications. Features
ECT 847 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The economical transmitter
More informationAllentown, PA - Plant Expansion Steel Pipe Spec. No. 671-S40 December 31, 2015
Steel DIVISION 15: MECHANICAL SECTION 15061: STEEL PIPE 1.0 GENERAL All materials shall be of high quality and as per the following specifications. 2.0 PRODUCTS 2.1 Specification CS-1 Service = (CA, VAC)
More information