4CONTROL VALVES CONTROL VALVES ULTRAFLO BUTTERFLY VALVES 522 SERIES NEW! H2X E2X KMSC-0 SPECIFICATIONS

Size: px
Start display at page:

Download "4CONTROL VALVES CONTROL VALVES ULTRAFLO BUTTERFLY VALVES 522 SERIES NEW! H2X E2X KMSC-0 SPECIFICATIONS"

Transcription

1 SERIES DESRIPTION The Series resilient seated butterfly valves are available in "-0" sizes. Economical and designed to meet todayʼs HV and industrial process requirements, they come standard with full lugged bodies, aluminum bronze discs, stainless steel stems and EPDM seats. Valves are rated at 00 psig and 0 F. The cast iron lug style bodies are drilled and tapped for NSI lass /0 flanges. The valves come assembled with electric, pneumatic, or manual operators and are ready to install. FETURES High pressure pneumatic actuators are rack and pinion driven and available in both double acting and spring return designs High torque industrial grade electric actuators are available in modulating or on/off configurations; spring return fail-safe operation also available High torque non-spring return industrial grade electric actuators are waterproof (NEM, X, and IP7) and come standard with heaters Valve discs are spherically machined and hand polished for bubble tight shut off, minimum torque, and long life Stem to disc connection features a tapered pin design for high pressure requirements Unique Tongue and Groove seat design is designed to seal with slip on or weld neck flanges The onded in Seat design totally encases the valve interior to isolate the body from line media orrosion resistant, heavy duty acetal bushings absorb side thrusts Stem packing gland is a self-adjusting double U cup design and gives positive sealing in both directions, preventing external substances from entering the stem bore -0-HX-0-0-KMS-0-0-EX-0 SPEIFITIONS Valve ody Polyester coated cast iron, lass Seat EPDM bonded in for dead end service Shaft/taper pin Type /7- ph Disc luminum ronze Weather seal una-n earings cetol Static pressure 00 psig Media Water, Ethylene Glycol Fluid temp -0 to 0 F (-0 to -0 ) Min closeoff 00 psid* Mounting type NSI /0 flanges Lug style (Wafer style is available.) Warranty years *all Kele for higher closeoff requirements Pneumatic s Main air (HP) 80-0 psi (P) 0- psi ontrol signals Modulating - psig with positioner -0 m D with E/P positioner Two-position (P) 0 or psi Two-position (HP) V solenoid ir onnection (HP) /" FNPT (P) /" or /" barb (included) mbient Temp (HP) -0 to 00 F (-0 to 9 ) (P) - to 7 F (-0 to 80 ) Electric s Power K, KS V 00/00S 0 V ph mbient temp K - to 0 F (-0 to 0 ) KS -0 to 0 F (-9 to 0 ) 00/00S - to 8 F (-9 to ) ontrol signals K/KS -pos. V, 0-0V / -0m 00/00S -pos. 0 V, -0m Enclosure K/KS NEM 00/00S NEM /X Manual operation (two-way valves only) " to " 0 position lever operators 8" to 0" Worm gear operators International US kele.com 00 Kele, Inc. ll rights reserved. The Kele name and logo are registered trademarks of Kele, Inc. //00 0

2 SERIES VLVE DIMENSIONS in (cm) PORT DIM. "." " " " " 8" 0" " " " 8" 0" -way -way Height without Weight -way Weight -way D. (.). (.). (.). () 7 (.) (0.9).7 (.) (.7).7 (7.) (.) 8 (.7) (.).7 (.). () 7. (8.). () 9 (.) 7 (.) (.). (.) 8. (.) 7 (7.8) (.8) 0 (7.7). (.) 7. (9.) 9. (.) 7. (9.) 0 (9.) (0.). (.) 8 (0.) 0. (.7) 8 (0.) (0.) 9 (7.). (.) 9 (.9). (9.) 9. (.) (9.) (.). (.) (8). (.) 0.7 (7.) (0) 9 (90.) (7.) (0.) (8.). (.) 88 (0) 7 (0) (7.) (.) 7 (.). (.) (.8) 70 (.) (0.) (8.) 9 (.).7 (7.) (7.) 98 (.0). (0.8). (.9) 0.7 (.7) (0.7) (0.) (7.) (.7) 8 (.7) (8.) 7. (.8) 0 (8.) (8.) Mounting lugs -.-UN 8-.-UN UN UN UN UN -.-07UN UN D * For total valve height add dimension D to the actuator coupling height listed above. mounting plate Two-way Valve odies Three-way Tee-Mounted Valve odies 00/00S SERIES WIRING Signal output Signal input Power supply 0/0 V L N -phase & VD powered models available 7 Notes:. Input signal: -0 m -V -0V. Output signal: -0 m -0V Power supply 0/0 V ustomer-supplied switch L N LOSED OPEN Modulating Service On/Off Service UXILIRY SWITH WIRING Series 0 - auxiliary switch wiring Series 0 auxiliary switch wiring Shown at fully clockwise rotation Shown at fully clockwise rotation D E E F //00 F 00 Kele, Inc. ll rights reserved. The Kele name and logo are registered trademarks of Kele, Inc. kele.com US International 0

3 SERIES K / KS TUTOR WIRING V K-0-T Two-position ontrol V Floating ontroller K-0-T Floating ontrol V 0/-0 VD or 0/-0 m 0/-0 VD feedback K-0-P Proportional ontrol V Power 0/-0 VD or 0/-0 m Signal 0/-0 VD or 0/-0 m 0/-0 VD feedback VD K-0-P Proportional ontrol VD Power 0/-0 VD or 0/-0 m Signal Relay contact or switch V Relay contact or switch 0 V V Floating controller V 0/-0 VD or 0/-0 m 0/-0 VD feedback * 00Ω, /"W or greater resistor required when control signal is -0 m KS-7- Two-position ontrol KS-7-0 Two-position ontrol KS-7-M Floating ontrol KS-7-M Proportional ontrol ELETRI TUTOR SPEIFITIONS (s are sized for 00 psi line pressure) -Way -Way Electric Electric Power ontrol Signal ELETRI TUTOR SPES Torque (in-lb) Failsafe Operation Timing seconds Dimensions H x W x L (in) oupling Height (in) -" " K-0 V, 9 V Two-position or -0 VD 0 No 9.9x.x8.8.. (.) " - KS-7 V, V Two-position or 0-0 VD 7 Yes 90.9x.9x (.) -" -." 0* 0 V, 0. Two Position or -0 m 0 No 0 7.x.0x (.) " -" 0* 0 V,.0 Two Position or -0 m 800 No 7x7.8x.8 (.) " " 0* 0 V,.0 Two Position or -0 m No 7x7.8x.8 (.) 8"-0" -8" 0* 0 V,. Two Position or -0 m 0 No.x9.x (.) " 0" 0* 0 V,.8 Two Position or -0 m 78 No 8.x9.x (.) "-" " 07* 0 V,. Two Position or -0 m 880 No x9.x7. 80 (.) 8"-0" " 08* 0 V,.0 Two Position or -0 m 7 No x9.x7. 80 (.) - "-8" 0* 0 V,.0 Two Position or -0 m No 8.x.x7.9 (.) - 0" * 0 V,.0 Two Position or -0 m 097 No 8.x.x7.9 (.) "- -." 0** 0 V, Two Position or -0 m Yes 7 ( Spring).7x0.x. 9. (7) "-" -" ** 0 V,.8 Two Position or -0 m 0 Yes 7 (8 Spring) 8.8x.x8..7 (7) - -" 0** 0 V,.8 Two Position or -0 m 770 Yes ( Spring).x7.x. 09. (9) 8" - ** 0 V,.8 Two Position or -0 m 0 Yes ( Spring).x7.x. 09. (9) Notes:. 0- and 0- electric actuators come standard with a control signal of -0 m but are configurable to - VD or -0 VD.. Spring return closed unless specified.. The K and KS Series actuators are Kele-brand direct-coupled actuators with NEM enclosures. They are used on smaller sized valves (<" for non-spring return and <." for spring return actuation).. ll 00 Series electric actuators come with integral heater. * 0- series actuators are electric industrial grade actuators. Upon loss of power the valves fail in place. Upon loss of signal the valves fail in place but are configurable to drive open, closed or in place. ** 0- series actuators are fail closed industrial grade actuators. Upon loss of power they will fail closed W. Upon loss of signal they will fail closed. Weight International US kele.com 00 Kele, Inc. ll rights reserved. The Kele name and logo are registered trademarks of Kele, Inc. //00 07

4 SERIES PNEUMTI TUTOR SPEIFITIONS (s are sized for 00 psi line pressure and 80 psi air supply) High Pressure Double-cting (D) HIgh Pressure Fail (F) High Pressure Fail (FO) Pneumatic Specs -Way -Way Valve Valve Size Size Pneumatic ir ontrol Signal Torque in-lb Source Failsafe psig Operation seconds Timing Dimensions oupling H x W x L in Height Weight** -Pos Prop. Nm = in-lb x 0. "-" " V* - psig 97 N/ 0.. x. x.8 Direct Mount. (.) ", "."-" V* - psig 7 N/ 0.. x.8 x 7. Direct Mount. (.8) " " V* - psig 0 N/ x.7 x 8.9 Direct Mount 8. (.8) 8" " V* - psig 7 N/ x.9 x.9 Direct Mount. (7.) 0" 8" V* - psig 89 N/ x. x. Direct Mount 0.9 (9.) " 0"-" V* - psig 7 N/ 9. x.8 x. Direct Mount 8. (7.) "-8" "-" V* - psig 870 N/. x 8.8 x 7.8 ".0 (9.) 0" 8"-0" V* - psig 97 N/.7. x 0.7 x.7 " (.) Spring return actuators may require different quantity of springs indicated by the last digit in part number. orresponding torque outputs are stated. " V* - psig W 0.. x. x.8 Direct Mount. (.9)."/" " 00-08() 80-0 V* - psig () W 0.. x.8 x 7. Direct Mount 7.9 (.) "." 00-09() 80-0 V* - psig 7(9) W x.7 x 8.9 Direct Mount 0.8 (.9) ", " "," 00-() 80-0 V* - psig 7(9) W x.9 x.90 Direct Mount.7 (0.) " V* - psig 08 W x. x. Direct Mount 7. (.) 8" " 00-() 80-0 V* - psig 88 W 9. x.8 x. Direct Mount. (.8) 0"/"/" 8"/0" 00-() 80-0 V* - psig 9(89) W. x 8.8 x 7.8 Direct Mount 9. (.) "/8"/0" "-" 00-()() 80-0 V* - psig 98(8)(7) W.7. x 0.7 x.7 " 9. (87.) " V* - psig W 0.. x. x.8 Direct Mount. (.9).", " V* - psig 0 W 0.. x.8 x 7. Direct Mount 7.9 (.) " V* - psig W x.7 x 8.9 Direct Mount 0.8 (.9) ", " V* - psig 78 W x.9 x.9 Direct Mount.7 (0.) V* - psig 87 W x. x. Direct Mount 7. (.) 8", 0" V* - psig 7 W 9. x.8 x. Direct Mount. (.8) " V* - psig W. x 8.8 x 7.8 " 9. (.) "-0" V* - psig 99 W.7. x 0.7 x.7 " 9. (87.) Low-Pressure Pneumatic*** " D /0 psig N 8 Yes 0.0 x 8.0 x.0 ".0 (.)."-" " D /0 psig N 8 Yes.0 x 0.0 x 0.0 " (0.9) "-"."-" D /0 psig N 9 Yes.0 x.0 x.0 " (.9) " D N - psig 8 Yes.0 x 0.0 x 0.0 ".0 (.)."-" " D N - psig 8 Yes.0 x.0 x.0 " (0.9) "-"."-" D-- 0- N - psig 9 Yes.0 x.0 x.0 " (.9) Notes: * V solenoids are standard. VD, VD, and V solenoids are available as well as - psi or -0 m positioners. ** Weights of fail-closed and fail-open actuators are maximum weight as the number of springs may vary by application. *** 70 maximum. D = Double cting, F = Fail, FO = Fail The " -way and " and " -way valves use double D--0 actuators. Spring return actuators may require different quantity of springs indicated by (). ontact Kele for complete actuator specifications. //00 00 Kele, Inc. ll rights reserved. The Kele name and logo are registered trademarks of Kele, Inc. kele.com US International 08

5 SERIES ELETRI TUTOR ODES *-Way is in ( ) when there is a difference in -way and -way sizes. ode (-Way) KNX or EX Position Non-spring Return KMNX or EMX Modulating Non-spring Return KSO,KS or E Position Spring Return Fail / KMSO,KMS or EM Modulating Spring Return Fail / " KNX or 0E KMNX or 0EM KSO, KS or 0S KSMO, KSM or 0SM." KNX (N) or 0E KMNX(N) or 0EM 0S 0SM " KNX(N) or 0E (0E) KMNX(N) or 0EM (0EM) 0S (S) 0SM (SM) " 0E (0E) 0EM (0EM) S SM " 0E (0E) 0EM (0EM) S SM " 0E (0E) 0EM (0EM) S (0S) SM (0SM) 8" 0E 0EM S SM 0" 0E (0E) 0EM (0EM) " 0E (07E) 0EM (07EM) " 07E (08E) 07EM (08EM) " 07E (0E) 07EM (0EM) 8" 08E (0E) 08EM (0EM) 0" 08E (E) 08EM (EM) PNEUMTI TUTOR ODES *-Way is in ( ) when there is a difference in -way and -way sizes. ode (-Way) "." " HX, HMX H, HM HO, HMO Pneumatic double acting Pneumatic fail closed (cw) Pneumatic fail open (ccw) (00-080) 00-0 (00-08) (00-09) P, PM, PO, PMO Pneumatic fail open/ fail closed (cw) D--0 (D--0) D--0 (D--0) (00-080) (00-) D--0 (D--0) " (00-080) (00-) D--0 (X FOR W) " (00-090) 00- (00-) 00- D--0 (X) (NO W) " (00-0) 00- (00-) 00- D--0 (X) (NO W) 8" 00-0 (00-0) 00- (00-) 00-0" 00-0 (00-0) 00- (00-) 00- " 00-0 (00-0) 00- (00-) 00- " (00-) 00- " (N) 00-8" 00-0 (00-0) 00- (N) 00-0" 00-0 (00-0) 00- (N) International US kele.com 00 Kele, Inc. ll rights reserved. The Kele name and logo are registered trademarks of Kele, Inc. //00 09

6 SERIES ORDERING INFORMTION MODEL ODE DESRIPTION SIZE ODE SIZE 90 (TWO-POSITION) 70 (LOW PRESSURE PNEUMTI) 0 (MODULTING) 0 " 8." " 7 0 " ", ",80, ",,8,08 0 0",0,98,70 " 8,077,9, " 0,8,99,8 ",9 7,87,8 8 8" 7, 0,0,7 0 0",9, 7, TUTOR ODE OPERTION INPUT SIGNL FIL POSITION ON LOSS OF POWER SUPPLY KELE ELETRI TUTORS - NON SPRING RETURN KNX Two-position, tri-state V N/ KMNX Proportional -0 VD, -0 m (with 00 Ohm resistor) ELETRI TUTORS - NON SPRING RETURN EX 0 V Two-position EMX -0 VD, -0 m (with 00 Ohm resistor) N/ KELE ELETRI TUTORS - SPRING RETURN KSO Two-position V KS Two-position V KMSO Modulating -0 VD, -0 m (with 00 Ohm resistor), tri-state KMS Modulating -0 VD, -0 m (with 00 Ohm resistor), tri-state ELETRI TUTORS - SPRING RETURN EO Two-position 0 V E EMO Proportional -0 m EM HIGH PRESSURE PNEUMTI - NON SPRING RETURN HX Two-position V N/ HMX Proportional - psig or -0 m HIGH PRESSURE PNEUMTI - SPRING RETURN HO H Two-position V HMO Proportional - psig or -0 m HM LOW-PRESSURE PNEUMTI - SPRING RETURN PO Two-position 0/0 psig P PMO Proportional - psig w/ Positioner PM MNUL OPERTION MX N/ Manual operation (-way valves only) "-" lever; 8"-0" gear operator UTTERFLY VLVE ONLY XXX N/ utterfly valve only ONFIGURTION ODE 0 -way -way (See below for illustration of -way configurations) Notes:. Do not use normally open actuators for way valves.. Kele non-spring return actuators available on " and smaller two way and " three way. Kele spring return available on " two way only.. Low pressure assemblies have a maximum open rotation of 70, for both -position and modulating control. THREE-WY ONFIGURTION ct. ct. //00 00 Kele, Inc. ll rights reserved. The Kele name and logo are registered trademarks of Kele, Inc. kele.com US International 0

F780HD, 3, 3-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc

F780HD, 3, 3-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc F80HD, 3, 3-Way utterfly Valve Resilient Seat, 304 Stainless Steel Disc pplication Valve is designed for use in NSI flanged piping systems to meet the needs of bi-directional high flow HV hydronic applications

More information

B6300VB-207, 3, V Ball Control Valve Carbon Steel Body, Hardened Chrome Plated, Stainless Steel Ball and Stem

B6300VB-207, 3, V Ball Control Valve Carbon Steel Body, Hardened Chrome Plated, Stainless Steel Ball and Stem 6300V-207, 3, V all ontrol Valve arbon Steel ody, Hardened hrome Plated, Stainless Steel all and Stem Product eatures ast quarter turn open or closed operation, Stainless steel ball and stem, Positive

More information

F6125HD, 2-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc

F6125HD, 2-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc 6125H, 2-Way utterfly Valve Resilient Seat, 304 Stainless Steel isc Product eatures 200 psi (2 to 12 ) and 150 psi (14 to 24 ) 0% leakage, Long stem design allows for 2 insulation, Valve face-to-face dimensions

More information

F6100HD, 4, 2-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc

F6100HD, 4, 2-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc 6100H, 4, 2-Way utterfly Valve Resilient Seat, 304 Stainless Steel isc pplication Valve is designed for use in NSI flanged piping systems to meet the needs of bi-directional high flow HV hydronic applications

More information

F650HD, 2-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc

F650HD, 2-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc 650H, -Way utterfly Valve Resilient Seat, 304 Stainless Steel isc Product eatures 00 psi ( to ) and 50 psi (4 to 4 ) 0% leakage, Long stem design allows for insulation, Valve face-to-face dimensions comply

More information

7000 Series Bronze Globe Valves Two-Way Normally Open

7000 Series Bronze Globe Valves Two-Way Normally Open 7000 Series Bronze Globe Valves Two-Way Normally Open / to in. Screwed NPT Two-Way Normally Open Spring Return Stem Up Open Globe Valves Two-Way Normally Open Assemblies Size in. / /4 Cv (K vs ) 0.4 (0.4).

More information

B2150VB-055, 1-1/2, V Ball Control Valve Hardened Chrome Plated Carbon Steel Body, Stainless Steel Ball and Stem

B2150VB-055, 1-1/2, V Ball Control Valve Hardened Chrome Plated Carbon Steel Body, Stainless Steel Ball and Stem 50V-055, -/, V all ontrol Valve Hardened hrome Plated arbon Steel ody, Stainless Steel all and Stem Product eatures ast quarter turn open or closed operation, Stainless steel ball and stem, Positive shut-off,

More information

F680HD, 2-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc

F680HD, 2-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc 680H, 2-Way utterfly Valve Resilient Seat, 304 Stainless Steel isc Product eatures 200 psi (2 to 12 ) and 150 psi (14 to 24 ) 0% leakage, Long stem design allows for 2 insulation, Valve face-to-face dimensions

More information

F6100HD, 2-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc

F6100HD, 2-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc 6100H, 2-Way utterfly Valve Resilient Seat, 304 Stainless Steel isc Product eatures 200 psi (2 to 12 ) and 150 psi (14 to 24 ) 0% leakage, Long stem design allows for 2 insulation, Valve face-to-face dimensions

More information

F6 VIC Butterfly Valves Way Ductile Iron Grooved End Body

F6 VIC Butterfly Valves Way Ductile Iron Grooved End Body 6 VI utterfly Valves 2 12 2-Way uctile Iron rooved nd ody psi (2 to 12 ) bubble tight shut-off Long stem design allows for 2 insulation ompletely assembled and tested, ready for installation pplication

More information

This specification describes the minimum requirements for piping systems for the following service:

This specification describes the minimum requirements for piping systems for the following service: SPEC-3004 1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Water Design Conditions Operating Conditions 10 PSIG @ 33 o F to

More information

B2...VS Series, 2-way, Ball Valve Bronze Body, Stainless Steel Ball and Stem

B2...VS Series, 2-way, Ball Valve Bronze Body, Stainless Steel Ball and Stem 2...VS Series, 2-way, all Valve ronze ody, Stainless Steel all and Stem Live-load packing set Stainless steel ball & stem low-out proof stem design Technical Data Media chilled or hot water, glycol, #

More information

This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface.

This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. SPEC-3500 1/9 1.0 PURPOSE This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. Note: This specification does

More information

B6400VB-350, 4, V Ball Control Valve Carbon Steel Body, Hardened Chrome Plated, Stainless Steel Ball and Stem

B6400VB-350, 4, V Ball Control Valve Carbon Steel Body, Hardened Chrome Plated, Stainless Steel Ball and Stem 6400V-350, 4, V all ontrol Valve arbon Steel ody, Hardened hrome Plated, Stainless Steel all and Stem Product eatures ast quarter turn open or closed operation, Stainless steel ball and stem, Positive

More information

This specification describes the minimum requirements for piping systems for the following service:

This specification describes the minimum requirements for piping systems for the following service: 201/01/13 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Air Design Conditions Operating Conditions Blast Air (see Note 1)

More information

Value Valves USA. Electric Actuator DOUBLE ACTING SPRING RETURN.

Value Valves USA. Electric Actuator DOUBLE ACTING SPRING RETURN. Value Valves US Electric ctuator DOUBLE CTING SPRING RETURN www.bvcusa.com 01~02 VLUE VLVE U.S.. ELECTRIC CTUTORS QURTER-TURN ELECTRIC CTUTOR FETURES FETURES Enclosure: IP 67 (Nema 4, Nema 4X) waterproof

More information

We Are the Worldwide Provider for All Your Valve and Fitting Needs

We Are the Worldwide Provider for All Your Valve and Fitting Needs Product Catalog We Are the Worldwide Provider for All Your and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for successful

More information

FEATURES OPTIONAL FEATURES

FEATURES OPTIONAL FEATURES -00--0 B Series The Assured Automation B Series electric valve actuators offer a rugged design for quarter turn industrial applications. Designed for use on quarter turn (0 ) ball valves, butterfly valves,

More information

B2 Series Characterized Control Valve, Spring Return Actuator

B2 Series Characterized Control Valve, Spring Return Actuator Series Characterized Control Valve, Spring ctuator Two-way Valve with Stainless Steel all and Stem, NPT Female Ends Service: Flow Characteristic: Media Temp Range: Maximum Differential: Pressure ( P) mbient

More information

F6/F7...HD/HDU Series Butterfl y Valves

F6/F7...HD/HDU Series Butterfl y Valves 71150-00001. INSTLLTION N MINTENNE INSTRUTIONS F6/F7...H/HU Series utterfl y Valves F6 HU utterfly Valves 2 12 uctile Iron Lug ody Resilient Seat, 304 Stainless isc 50 psi bubble tight shut-off Long stem

More information

MOTORIZED VALVES SHANGHAI INJOY INDUSTRY CO.,LTD.

MOTORIZED VALVES SHANGHAI INJOY INDUSTRY CO.,LTD. MOTORIZED VALVES SHANGHAI INJOY INDUSTRY O.,LTD. MOTORIZED VALVE Ball Butterfly PAGE 1 Motorized heck Globe Gate Knife Gate M Series EAB Series Electric Actuator EAH Series H Series KE Series! Specialize

More information

This specification describes the minimum requirements for piping systems for the following service:

This specification describes the minimum requirements for piping systems for the following service: 201/11/2 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Underground Service Water Note: This specification does not apply to piping

More information

This specification describes the minimum requirements for piping systems for the following service:

This specification describes the minimum requirements for piping systems for the following service: SPEC-3501 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Instrument Air Design Conditions 150 PSIG @ 180 F Operating Conditions 125

More information

BONOMI NORTH AMERICA SERIES 500N - 500S

BONOMI NORTH AMERICA SERIES 500N - 500S BOI RTH AERICA SERIES 500N - 500S NYON COATED DISC CF SS DISC anually operated butterfly valves. Epoxy coated cast iron wafer body. Full port sizes / to. EPD resilient seat -0 F to 50 F. API609 face to

More information

B6400S-186, 2-Way, Characterized Control Valve Stainless Steel Ball and Stem

B6400S-186, 2-Way, Characterized Control Valve Stainless Steel Ball and Stem 6400S-86, 2-Way, haracterized ontrol Valve Stainless Steel all and Stem pplication This valve is typically used in air handling units on heating or cooling coils, and fan coil unit heating or cooling coils.

More information

B350L, 3-Way, Diverting Ball Valve Chrome Plated Brass Ball and Nickel Plated Brass Stem

B350L, 3-Way, Diverting Ball Valve Chrome Plated Brass Ball and Nickel Plated Brass Stem B350L, 3-Way, Diverting Ball Valve hrome Plated Brass Ball and Nickel Plated Brass Stem pplication This valve is typically used in air handling units on heating or cooling coils, and fan coil unit heating

More information

General Information. Ball Curb Valve

General Information. Ball Curb Valve General Information 1. All Jones Curb Valves are manufactured in accordance with the AWWA Standard C-800-latest revision. 1. Copper Alloy CDA No. C83600 (85-5-5-5) 2. Copper Alloy CDA No. 89520 (Low Lead)

More information

P2050B005, 1/2, Pressure Independent Valve Chrome Plated Brass Ball and Brass Stem, NPT Female Ends

P2050B005, 1/2, Pressure Independent Valve Chrome Plated Brass Ball and Brass Stem, NPT Female Ends P2050005, 1/2, Pressure Independent Valve hrome Plated rass all and rass Stem, NPT emale nds pplication The Pressure Independent haracterized ontrol Valve is typically used in air handling units on heating

More information

P2050B050, 1/2, Pressure Independent Valve Chrome Plated Brass Ball and Brass Stem, NPT Female Ends

P2050B050, 1/2, Pressure Independent Valve Chrome Plated Brass Ball and Brass Stem, NPT Female Ends pplication The Pressure Independent haracterized ontrol Valve is typically used in air handling units on heating and cooling coils, and fan coil unit heating or cooling coils. Some other common applications

More information

P2075B100-P, 3/4, Pressure Independent Valve Chrome Plated Brass Ball and Brass Stem, NPT Female Ends

P2075B100-P, 3/4, Pressure Independent Valve Chrome Plated Brass Ball and Brass Stem, NPT Female Ends P2075100-P, 3/4, Pressure Independent Valve hrome Plated rass all and rass Stem, NPT emale nds pplication The Pressure Independent haracterized ontrol Valve is typically used in air handling units on heating

More information

.1 Materials and installation for steel piping, valves and fittings for hydronic systems in building services piping..2 Related Sections.

.1 Materials and installation for steel piping, valves and fittings for hydronic systems in building services piping..2 Related Sections. Issued 2006/08/01 Section 15183 Hydronic Systems: Steel Page 1 of 6 PART 1 GENERAL 1.1 SUMMARY.1 Section Includes..1 Materials and installation for steel piping, valves and fittings for hydronic systems

More information

24000, 3/2 Direct solenoid actuated direct poppet valves

24000, 3/2 Direct solenoid actuated direct poppet valves > > Port size: G/4... G / > > Working from 0 bar up > > Suitable for vacuum range down to, 0 - mbar l/s > > 65, Ex em, Ex d (TEX approved, see solenoid operators) > > Suited for outdoor installation Technical

More information

ELECTRIC ACTUATOR. Quarter turn(rotary type) - ZGQ Series

ELECTRIC ACTUATOR. Quarter turn(rotary type) - ZGQ Series ELECTRIC ACTUATOR Quarter turn(rotary type) - ZGQ Series Construction (Inside) - Manual handle - Limit switch cam - Limit switch - Stopper - Cable entries - Valve bracket - Indicator - Motor (Reversible

More information

B212, 2-Way, Characterized Control Valve Stainless Steel Ball and Stem

B212, 2-Way, Characterized Control Valve Stainless Steel Ball and Stem , -Way, haracterized ontrol Valve Stainless Steel all and Stem pplication This valve is typically used in air handling units on heating or cooling coils, and fan coil unit heating or cooling coils. Some

More information

Section Content. Power Turntable Manual Turntable Low Profile Manual Turntable Optional Equipment and Devices

Section Content. Power Turntable Manual Turntable Low Profile Manual Turntable Optional Equipment and Devices s Section Content Power Manual Low Profile Manual Optional Equipment and Devices P.O. Box 352 Alpena, Michigan 49707 Phone 989.358.7000 Fax 989.358.7020 info@omni.com www.omni.com 105 TT s WHY TT? Provide

More information

AE SERIES ACTUATORS 2016 EDITION. The Best Way To Automate Your Process. Modulating Capable. Extended Duty Cycle Models Fast Acting Models

AE SERIES ACTUATORS 2016 EDITION. The Best Way To Automate Your Process. Modulating Capable. Extended Duty Cycle Models Fast Acting Models The Best Way To Automate Your Process St a n d a r d Vo l t age s 110/240/380/480V 24/24VDC Modulating Capable Extended Duty Cycle Models Fast Acting Models AE SERIES ACTUATORS 2016 EDITION Max-Air Technology,

More information

Cover Page - Electric Actuators & Accessories. Standard & Optional Features. OM Actuator Standard Features. OM Actuator Optional Features

Cover Page - Electric Actuators & Accessories. Standard & Optional Features. OM Actuator Standard Features. OM Actuator Optional Features SECTION 5 INDEX DESCRIPTION Cover Page - Electric Actuators & Accessories Standard & Optional Features OM Actuator Standard Features OM Actuator Optional Features V / Actuator Selection Chart OM1 Actuator

More information

Technical Documentation Electronic Characterized Control Valves (CCV)

Technical Documentation Electronic Characterized Control Valves (CCV) Technical Documentation Electronic Characterized Control Valves (CCV) Effective March 005 Table of Contents Control Valve Product Range... Valve/ctuator Selection t Glance...4 Electronic Characterized

More information

Electric Actuator. of innovated design. Introducing KIMAX CONTROLS INC. > Patented switch of manual & Motor operation. Clutchless manualoverride.

Electric Actuator. of innovated design. Introducing KIMAX CONTROLS INC. > Patented switch of manual & Motor operation. Clutchless manualoverride. CONTROLS INC. Introducing KIMAX CONTROLS INC. Kimax Taiwan : 5F-10,No.3, Lane 2, First Industrial Rd., Taichung Taiwan, 40767 Tel:886-4-23507533 Fax:886-4-23507531 E-mail:eric-shia@kimax.com.tw Kimax China

More information

3-Way Ball Valves. Overview. Applications. Features & Benefits. Datasheet

3-Way Ball Valves. Overview. Applications. Features & Benefits. Datasheet 3-Way Ball s Datasheet Overview 3-way Ball s are coupled with DA-Series Actuators to provide three-way mixing or diverting flow control. The ball valves are 1/4-turn rotary control valves and are available

More information

General Four-Way Operation, Maintenance & Service Manual

General Four-Way Operation, Maintenance & Service Manual General Four-Way Operation, Maintenance & Service Manual SCOPE Included in the following pages you will find assembly drawings, exploded views, parts lists, assembly tips, operational descriptions and

More information

Fisher 667 Diaphragm Actuators Size 80 and 100

Fisher 667 Diaphragm Actuators Size 80 and 100 Instruction Manual 667 Size 80 and 100 Actuators Fisher 667 Diaphragm Actuators Size 80 and 100 Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 2 Maximum Pressure Limitations...

More information

B240, 2-Way, Characterized Control Valve Stainless Steel Ball and Stem

B240, 2-Way, Characterized Control Valve Stainless Steel Ball and Stem 0, 2-ay, haracterized ontrol Valve Stainless Steel all and Stem pplication This valve is typically used in air handling units on heating or cooling coils, and fan coil unit heating or cooling coils. Some

More information

WE Series FEATURES OPTION CONFIGURATION STANDARD CONFIGURATION

WE Series FEATURES OPTION CONFIGURATION STANDARD CONFIGURATION WE Series The WE-500 Electric Actuator is an extremely rugged design actuator used for small ball valves (less than 2 ), dampers and other quarter-turn devices. The actuator is NEMA 4X and includes a visual

More information

Series 70 24V and 120V Actuator 600 to 18,000 lb.-in.

Series 70 24V and 120V Actuator 600 to 18,000 lb.-in. Application Bray s years of proven success in quarter turn electric actuation, combined with innovative engineering, has produced the modern Series 70. The Series 70 has become the industry standard in

More information

AC/DC 24 V, 50/60 Hz. Functional data Variable Settings. DC V, max. 0.5 ma. End point DC V... 4 ma ma Non-variable

AC/DC 24 V, 50/60 Hz. Functional data Variable Settings. DC V, max. 0.5 ma. End point DC V... 4 ma ma Non-variable echnical data sheet S--MF- Multifunctional rotary actuator for butterfly valves orque 00 Nm Nominal volta e V Control: ontrol configurable confi urable Position feedback: configurable Auxiliary u iliary

More information

B250, 2-Way, Characterized Control Valve Stainless Steel Ball and Stem

B250, 2-Way, Characterized Control Valve Stainless Steel Ball and Stem 250, 2-ay, haracterized ontrol Valve Stainless Steel all and Stem pplication This valve is typically used in air handling units on heating or cooling coils, and fan coil unit heating or cooling coils.

More information

MATERIAL COMBINATION NUMBER 2: Corrosive environment requiring harder, wear-resistant seating faces and resistance to dezincification.

MATERIAL COMBINATION NUMBER 2: Corrosive environment requiring harder, wear-resistant seating faces and resistance to dezincification. Cast Iron Slide Gates Spec Sheet General The contractor shall furnish and install the following cast iron slide gate assemblies as listed on the Gate Schedule and detailed on the manufacturer s drawings.

More information

TOOLS AND INSTALLATION

TOOLS AND INSTALLATION TOOLS AND INSTALLATION Safe, leak-free operation of any high-pressure system is dependent on correctly prepared and installed connections. This section outlines proper instructions for the machining and

More information

AWWA. Electric Actuators WE Series Weatherproof CSA Approved TYPE 4 & 4X ,900 in-lbs. torque C CONTROLS

AWWA. Electric Actuators WE Series Weatherproof CSA Approved TYPE 4 & 4X ,900 in-lbs. torque C CONTROLS Electric Actuators WE Series Weatherproof CSA Approved TYPE 4 & 4X 500-25,900 in-lbs. torque XE Series Explosion Proof ATEX Certified EEx d IIB T4 690-25,900 in-lbs. torque AWWA C540-93 201383 TYPE 4 &

More information

DURA-TAC ROTARY ACTUATORS SRA SERIES JG SERIES BALL DRIVEN RACK DRIVEN

DURA-TAC ROTARY ACTUATORS SRA SERIES JG SERIES BALL DRIVEN RACK DRIVEN DURATAC JG SERIES BALL DRIVEN SRA SERIES RACK DRIVEN See Page 51.1 See Page 52.1 DURATAC Rotary Actuators JGSERIES BALL DRIVEN DURATAC JG1000 is an economic rotary actuator with rotary motion achieved

More information

InVue Integrated Flow Controllers NT6510, NT6520

InVue Integrated Flow Controllers NT6510, NT6520 DVNED MTERILS HNDLING InVue Integrated Flow ontrollers NT6510, NT6520 Precise point-of-use chemical flow control Entegris is solving today s flow control challenges using innovative flow control technology.

More information

MUELLER GAS. DH-5 Drilling Machine. For use on 1 1 /2 & 2 Line Stopper Fittings. Reliable Connections. General Information 2

MUELLER GAS. DH-5 Drilling Machine. For use on 1 1 /2 & 2 Line Stopper Fittings. Reliable Connections. General Information 2 operating Instructions manual MUELLER GAS TAble of contents PAGE DH-5 Drilling Machine For use on 1 1 /2 & 2 Line Stopper Fittings General Information 2 Installing and Stopping-off 1 1 /2 and 2 Line Stopper

More information

LINEAR ELECTRIC ACTUATORS WITH FAIL-SAFE FUNCTION

LINEAR ELECTRIC ACTUATORS WITH FAIL-SAFE FUNCTION LINEAR ELECTRIC ACTUATORS WITH FAIL-SAFE FUNCTION Type ELR2.1, ELR2.2, ELR2.3 DESCRIPTION Electric linear actuators ELR series for modulating and openclose duty of control and process technology to operate

More information

FAS 10 mm PICOSOL Direct acting solenoid valve

FAS 10 mm PICOSOL Direct acting solenoid valve FS 0 mm PICOSOL > > /, /; Manifold mounting > > Long life 00 million cycles > > Compact Design > > Low power consumption Technical features Medium: ir, oxygen, neutral gases (0 %... 9 % humidity, non condensing),

More information

Reliance SG800 Series Steel Water Gage Valves

Reliance SG800 Series Steel Water Gage Valves Installation, Operation, & Maintenance Instructions R500.541D1 10/16/2016 Reliance SG800 Series Steel Water Gage Valves Note: Design variations in Steel Water Gage Valves necessitate typical illustrations,

More information

Fisher 1052 Size 20 Diaphragm Rotary Actuator with H Mounting Adaptation

Fisher 1052 Size 20 Diaphragm Rotary Actuator with H Mounting Adaptation Instruction Manual 1052 Size 20 Actuator (H) Fisher 1052 Size 20 Diaphragm Rotary Actuator with H Mounting Adaptation Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications...

More information

5.1 MUELLER CORPORATION VALVES. MUELLER 300 Ball Type Corporation Valves

5.1 MUELLER CORPORATION VALVES. MUELLER 300 Ball Type Corporation Valves MUELLER CORPORATION VALVES 5.1 Shaded area indicates changes Rev. 4-14 Machine inserted corporation stops were developed by Hieronymus Mueller in conjunction with his development of the drilling and tapping

More information

V Ball Control Valve Product Range

V Ball Control Valve Product Range V all ontrol Valve Product ange VSI all Valve Product ange...v, 6...V Type Suitable ctuators v Inches DN [mm] -way NPT Flange Spring eturn Electronic Fail-Safe Non-Spring eturn 4 1 5 00V-04 55 1½ 40 50V-055

More information

EN 1092 PN 10 EN 1092 PN 16 JIS B K ANSI B16.5 Class 150 ANSI B16.47 Class 150 BS 10 Table D

EN 1092 PN 10 EN 1092 PN 16 JIS B K ANSI B16.5 Class 150 ANSI B16.47 Class 150 BS 10 Table D HG EN 1092 PN 10 EN 1092 PN 16 JIS 2238 10K ANSI 16.5 Class 150 ANSI 16.47 Class 150 S 10 Table D Stafsjö s knife gate valve HG is a bi-directional valve, particularly well suited for severe operating

More information

Mueller Gas Products. Mueller H17800 Curb Stop Tee No Blo Curb Stop Tee Weld x Weld 1440 PSI

Mueller Gas Products. Mueller H17800 Curb Stop Tee No Blo Curb Stop Tee Weld x Weld 1440 PSI Mueller Gas Products Distributed by: Mountain States Pipe and Supply Colorado Springs, Colorado 80903 1 800 777 7173 Mueller H17800 Curb Stop Tee No Blo Curb Stop Tee Weld x Weld 1440 PSI MUELLER NO-BLO

More information

Powers Controls No. 3 Pneumatic Damper Actuator

Powers Controls No. 3 Pneumatic Damper Actuator Document No. 129-127 September 24, 2009 Powers Controls No. 3 Pneumatic Damper Actuator Description The No. 3 Pneumatic Damper Actuator is a compact, totally enclosed, rolling diaphragm type actuator designed

More information

LA-5000 SERIES LINEAR VALVE ACTUATORS

LA-5000 SERIES LINEAR VALVE ACTUATORS LA-5000 SERIES LINEAR VALVE ACTUATORS GENERAL DESCRIPTION The LA-5000 Series are bi-directional, linear actuators internally geared to produce up to 6,500 lbs. (28,913 N) of thrust, and offer continuous

More information

L25 Incremental Optical Encoder

L25 Incremental Optical Encoder L25 Incremental Optical Encoder The L25 is a lighter duty version of the H25. With low starting torque, a 1/4" diameter stainless steel shaft and a drawn aluminum cover. In most intances, the L25 encoder

More information

InTurn Ultra and Ultra-T Indexing and Turning 4 th axis

InTurn Ultra and Ultra-T Indexing and Turning 4 th axis Specifications for the InTurn Ultra and Ultra-T Indexing and Turning 4 th axis Industrial quality. 100% duty cycle. Production ready. The InTurn series is the only CNC mill accessory that provides both

More information

Series 4310 A Partnership for Success Series Battioni P agani Battioni Pagani Series Pompe natv ac.c om

Series 4310 A Partnership for Success Series Battioni P agani Battioni Pagani Series Pompe natv ac.c om Vacuum Pumps & Blowers 4310 Blower A Partnership for Success Commercial duty Battioni Pagani Battioni Pagani Pompe Vacuum pumps & Blowers Vacuum / Pressure Pumps MEC 2000-4000 607 - National Vacuum Equipment

More information

PENSTOCK VALVES. Performance through Excellence

PENSTOCK VALVES. Performance through Excellence VALVES & MANUFACTURING (1988) LTD. PENSTOCK VALVES Performance through Excellence SLIDEGATES WEIR GATES STOP LOGS SLIDEGATES PRECISION FACE SEALING VALVES WEIR GATES STOP LOGS SLIDEGATES Actuation Installation

More information

Explosion proof rotary actuator - On/Off or programmable regulating actuator

Explosion proof rotary actuator - On/Off or programmable regulating actuator Explosion proof rotary actuator - On/Off or programmable regulating actuator Direct mounting for quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Type 3004 can

More information

W-K-M Model MA-1 DynaCentric Butterfly Valve

W-K-M Model MA-1 DynaCentric Butterfly Valve Page 1 of 16 R E P A I R M A N U A L W-K-M Model MA-1 DynaCentric Butterfly Valve Page 2 of 16 Published October 2001 W-K-M and DynaCentric are trademarks of Cooper Cameron Corporation Cooper Cameron Corporation,

More information

Valves with a difference. Electrical Actuators DVC INTERNATIONAL

Valves with a difference. Electrical Actuators DVC INTERNATIONAL Valves with a difference Electrical Actuators DVC INTERNATIONAL With DVC International as your business partner, you are always guaranteed a wide, well sorted product range and a unique technical know-how

More information

F6 Series 2-Way, Victaulic Butterfly Valve

F6 Series 2-Way, Victaulic Butterfly Valve F6 Series 2-Way, Victaulic Butterfly Valve 200 psi (2 to 12 ) bubble tight shut-off Long stem design allows for 2 insulation Completely assembled and tested, ready for installation Application These valves

More information

2-Way Proportional Logic Cartridge Valve Model FE.. (Series 1X and 2X) PSI (315 bar) F with electrical connection 12 X Y

2-Way Proportional Logic Cartridge Valve Model FE.. (Series 1X and 2X) PSI (315 bar) F with electrical connection 12 X Y RA 9 /6.98 -Way Proportional Logic Cartridge Valve Model FE.. (Series X and X) Size 6... 6... 6 PSI (5 bar)... 75 GPM (8 L/min) RA 9 /6.98 Replaces: 5.9 Characteristics: Single land throttle valve (main

More information

Tuf-Lite II Fans H Hi Temp 3000HT Series Hub

Tuf-Lite II Fans H Hi Temp 3000HT Series Hub Tuf-Lite II Fans H Hi Temp 3000HT Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II Hi Temp Fan Blades Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Hi Temp fan blades (Red) are

More information

Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator

Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator ANSI version Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam

More information

Spring Return DuraDrive Proportional Actuator

Spring Return DuraDrive Proportional Actuator MS40-7043, MS4-7073, MS4-753 Spring Return DuraDrive Proportional Actuator For spring return applications that require proportional modulation control of dampers and valves in HVAC systems. Features: Proportional

More information

Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.

Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. 1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.

More information

Electric actuator for quarter-turn valves. For output torques to 17,700 lb. in.

Electric actuator for quarter-turn valves. For output torques to 17,700 lb. in. Electric actuator for quarter-turn valves. For output torques to 17,700 lb. in. Features Standard Standard actuator accepts 24 to 240 Volt DC or C single phase input, 50 and 60 Hz. Three phase is optional.

More information

(12) Patent Application Publication (10) Pub. No.: US 2016/ A1

(12) Patent Application Publication (10) Pub. No.: US 2016/ A1 (19) United States US 2016O178067A1 (12) Patent Application Publication (10) Pub. No.: US 2016/0178067 A1 Abouelleil (43) Pub. Date: Jun. 23, 2016 (54) VALVE BODY AND SEAT WITH TONGUE (52) U.S. Cl. AND

More information

ICM/ICAD Motorized Valve. Quick Start Guide. Installation, Programming, and Trouble-shooting REFRIGERATION & AIR-CONDITIONING

ICM/ICAD Motorized Valve. Quick Start Guide. Installation, Programming, and Trouble-shooting REFRIGERATION & AIR-CONDITIONING Installation, Programming, and Trouble-shooting REFRIGERATION & AIR-CONDITIONING Quick Start Guide Contents Page Installation...............................................................................................3

More information

Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard

Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard 5. Input Cover 6. O-Ring 7. Hex Head Cap Screw 8. Input

More information

bronze ball valves Ball-Grooved Box Qty. 1 1 Above with 2 internal Case Qty. 4 4 Supervisory Switches Unit Weight

bronze ball valves Ball-Grooved Box Qty. 1 1 Above with 2 internal Case Qty. 4 4 Supervisory Switches Unit Weight fire protection valves FPP-0312 Effective March 26, 2012 Supercedes FPP-0611 of June 1, 2011 Prices and MTO status subject to change without notice. Visit our website for the most current information.

More information

BP Brine Pro Brine Maker. Parts List. This Parts List is for BP-2000 brine makers with serial numbers beginning with and higher.

BP Brine Pro Brine Maker. Parts List. This Parts List is for BP-2000 brine makers with serial numbers beginning with and higher. November, 0 Lit. No., Rev. 0 BP-000 Brine Pro Brine Maker Parts List This Parts List is for BP-000 brine makers with serial numbers beginning with 00 and higher. A DIVISION OF DOUGLAS DYNAMICS, LLC FRAME

More information

Bronze Ball Valves. Ball-Grooved Box Qty. 1 1 Above with 2 internal Case Qty. 4 4 Supervisory Switches Unit Weight

Bronze Ball Valves. Ball-Grooved Box Qty. 1 1 Above with 2 internal Case Qty. 4 4 Supervisory Switches Unit Weight FIRE PROTECTION VALVES FPP-0115 Effective January 19, 2015 Supercedes FPP-0114 of January 6, 2014 Prices and MTO status subject to change without notice. Visit our website for the most current information.

More information

FA-3300 Heavy Duty Electric Actuator. Features and Benefits. FA-3300 Actuator with VG8000 valve. Constant running time. Fixed close-off force.

FA-3300 Heavy Duty Electric Actuator. Features and Benefits. FA-3300 Actuator with VG8000 valve. Constant running time. Fixed close-off force. European Electronic Controls Catalogue Section E Product Bulletin FA-3300 Issue Date 0998 FA-3300 Heavy Duty Electric Actuator I ntroduction The FA-3300 series synchronous motor-driven, reversible, heavy

More information

Electric Actuator ITQ Series

Electric Actuator ITQ Series Electric Actuator ITQ Series BS EN ISO 900:000 INTRODUTION ITork controls designs, produces and provides high quality actuators and services related to valve automation. Our long years experience in the

More information

3 & 4 Wire Self Compensating Ultrasonic Transmitters - Standard Mtg.& Sanitary Ferrule Mtg.

3 & 4 Wire Self Compensating Ultrasonic Transmitters - Standard Mtg.& Sanitary Ferrule Mtg. & 4 Wire Self ompensating Ultrasonic Transmitters - Standard Mtg.& Sanitary Ferrule Mtg. FETURES S.S. 1L Face Material c/w Tri-lamp Mtg. Base Simple push-button calibration (ccurate) Output 4-20 m / 20-4

More information

SECTION E CONTENTS THREE WAY VALVES DESCRIPTION

SECTION E CONTENTS THREE WAY VALVES DESCRIPTION SECTION E CONTENTS THREE WAY VALVES DESCRIPTION PAGE 70-600, Threaded Bronze E-1 70-900, Solder Bronze E-2 76-600, Threaded Stainless Steel E-3 3-Way Valve Application E-4 Chromium plated ball 70-600 3-Way

More information

E l e c t r i c A c t u a t o r s

E l e c t r i c A c t u a t o r s Electric Actuators A103/02 S U M M A R Y BERNARD classification 3 Terminology 4 Motor duty service 5 2 Positioning loops 6 Regulation modes 7 3 classes of actuators 8 Electronic positioner general functions

More information

Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4

Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016

More information

VA-9070 Series Electric Rotary Actuators for Two-Position and Modulating Service

VA-9070 Series Electric Rotary Actuators for Two-Position and Modulating Service VA-9070 Series Electric Rotary Actuators for Two-Position and Modulating Service Product Bulletin Code No. LIT-977319 Issued September 26, 2014 The VA-9070 Series Electric Rotary Actuators for Two-Position

More information

AE SERIES ACTUATORS. Electric Actuators. Standard Voltages 110/240/380/480V 24VAC/24VDC. Modulating Capable. 100% Duty Cycle Models Fast Acting Models

AE SERIES ACTUATORS. Electric Actuators. Standard Voltages 110/240/380/480V 24VAC/24VDC. Modulating Capable. 100% Duty Cycle Models Fast Acting Models AE SERIES ACTUATORS Electric Actuators Standard Voltages 110/240/380/480V 24/24VDC Modulating Capable 100% Duty Cycle Models Fast Acting Models Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366

More information

Ball Valve Features and Benefi ts B2...VS / VSS and B3...L

Ball Valve Features and Benefi ts B2...VS / VSS and B3...L all Valve Features and enefi ts 2...VS / VSS and 3...L Tech.Doc - 07/17 - Subject to change. elimo ircontrols (US), Inc. 2-way and 3-way confi guration ronze with stainless steel trim (2-way) Nickel plated

More information

FUEL GAS PIPING SECTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section.

FUEL GAS PIPING SECTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section. FUEL GAS PIPING SECTION 15355 PART 1 GENERAL 1.1 DESCRIPTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section. B. This specification covers both interior and exterior

More information

Tuf-Lite III Fans K Hi Temp 3000KHT Series Hub

Tuf-Lite III Fans K Hi Temp 3000KHT Series Hub Tuf-Lite III Fans K Hi Temp 3000KHT Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 11 thru 15 Diameter Hudson Tuf-Lite III fan blades Hudson Tuf-Lite III Hi Temp (Red) fan blades are of single

More information

Introduction... 2 Scope of Manual... 2 Description... 2 Specifications Installation... 2 Actuator Mounting... 3 Loading Connection...

Introduction... 2 Scope of Manual... 2 Description... 2 Specifications Installation... 2 Actuator Mounting... 3 Loading Connection... Instruction Manual Form 1909 February 1999 Type 657 Sizes 80 & 100 Introduction.............................. 2 Scope of Manual............................. 2 Description..................................

More information

Rhino Packing Gland Tool

Rhino Packing Gland Tool Instruction Sheet P/N Rhino Packing Gland Tool 1. Description See Figure 1. The Rhino packing gland tool is used to remove the packing gland from Rhino bulk unloader pumps. The tool consists of two components,

More information

MODEL: VOS-ER. [4] LEVER POSITION 1: Upper side 2: Lower side. Position Sensors

MODEL: VOS-ER. [4] LEVER POSITION 1: Upper side 2: Lower side. Position Sensors Position Sensors 2-WIRE POSITION TRANSMITTER (flameproof, rotary motion type) Functions & Features Differential transformer incorporated Light weight and compact design High resolution Zero & Span adjustable

More information

NEW VALID VT-1000 VERTICAL LATHE

NEW VALID VT-1000 VERTICAL LATHE NEW VALID VT-1000 VERTICAL LATHE The Valid VT-1000 CNC Vertical Lathe is the result of several years of collaboration between Valid Machinery of the United States and Precursor Tech Co. LTD. of Taiwan.

More information

Electric Actuator MULTI-TURN. ITM Series 0180 / 0450 / 0750 / 1800 / 3000

Electric Actuator MULTI-TURN. ITM Series 0180 / 0450 / 0750 / 1800 / 3000 Electric Actuator MULTI-TURN Series 0180 / 0450 / 0750 / 1800 / 3000 BS EN ISO 9001:2000 INTRODUCTION MULTI-TURN ACTUATOR SERIES With many years of experience with wide range of products used in the Valve

More information

Bronze Ball Valves. Ball-Grooved Box Qty. 1 1 Above with 2 internal Case Qty. 4 4 Supervisory Switches Unit Weight

Bronze Ball Valves. Ball-Grooved Box Qty. 1 1 Above with 2 internal Case Qty. 4 4 Supervisory Switches Unit Weight FIRE PROTECTION VALVES FPP-0118 Effective January 1, 2018 Supercedes FPP-0717 of July 24, 2017 Prices and MTO status subject to change without notice. Visit our website for the most current information.

More information