Plunger type Metering Pump

Size: px
Start display at page:

Download "Plunger type Metering Pump"

Transcription

1 type Metering Pump

2 High-precision, High-pressure Injection Now Possible Improved Seal Service Life Makes This Pump Ideal for Metering Injection of hemicals Features Stable discharge precision. High durability Easy maintenance 2-stage valve seat used for accurate highpressure injection Mechanism Reciprocating motion of the plunger coupled to the drive piston by a proprietary universal joint transmits volumetric changes to the inside of the cylinder to suck in and feed liquid. This universal joint drastically extends the service life of seals (V packing or special U packing). The figure below is for the S series. The structure for the Z and R series is different No.1 joint 2 Valve seat 3 heck ball Pump head 5 7 V packing Packing retainer Universal joint SXPA1 model SYPA1 model ZP1 model

3 Model ode S X P A 1 01 P S T S F W Performance Specifications SX(Y)PA1 ZP1 RYP1 RZP1 RYP A: Version 5 - a b - a b c 7 - a b (S series only) 1 Series name S: S series R: R series 2 Drive box type X: Vertical type Y: Horizontal type Z: Horizontal reinforced specification (R series only) 3 Pump head P: Number of 5 Model (plunger diameter standard) a b Liquid contact material a b P -0P P x2 x2 1.7x2 x2.9x2.7x Liquid ontact Material Max. discharge Max. Strokes per volume (m) discharge minute (spm) Hz 0 Hz pressure (MPa) Hz 0 Hz.5 () 5.5 () (9) 3 (59) (9.0) 12 (11) (9) 3 (59) 23 (22) 2 (27) (9) 3 (59) 5 (5) 70 (5) (9) 3 (59) 1 (1) 1 (1) (9) 3 (59) 2 (2) 20 (20) 53 (9) 3 (59) x2 x2 x2 x2.3x2 12.9x2 SNS NBR (V packing) NBR SXPA/SYPA pump heads 1: Single=Basic type 2: Duplex 3: Triplex : -head 5: 5-head : -head For details on Z Series model codes, check in the Z Series catalog. Model Model Model Liquid ontact Type Part Name Pump Head seal heck ball Joint O-ring Valve seat Max. discharge volume () Hz 0 Hz Max. Strokes per discharge minute (spm) pressure (MPa) Hz 0 Hz Stroke length Stroke length diameter diameter STS (V packing) 01 : diameter 1 mm P: High-pressure type (some models only) No indication: General model onnection type/aperture Flange FW Union Discharge Suction side side UW JIS K A JIS K A JIS K A JIS K A JIS K A JIS K A R3/ R3/ R3/ R3/ R3/ R3/ onnection type/aperture Flange FW Discharge Suction Union side side UW JIS K A JIS 1K A JIS 1K A JIS 1K A Rc1/2 JIS K A JIS 1K A JIS K A JIS K A JIS 1K A JIS K A JIS K A JIS K A JIS K A JIS K A JIS K A JIS K A JIS K A JIS K A JIS 1K A JIS K A JIS K A JIS K A JIS 1K A JIS K A JIS K A JIS K A JIS K A JIS K A Rc1/2 Motor specifications Weight Power/ Rated Startup number current (A) current (A) (kg) 0/0/2 V 0/0/2 V of poles STS model : /0/0 Hz : /0/0 Hz kw P 1.3/1.1/1.1 /./ Approx. 11 (1) kw P 1.3/1.1/1.1 /./ Approx. 11 (1) kw P 1.3/1.1/1.1 /./ Approx. 11 (1) kw P 1.3/1.1/1.1 /./ Approx. 12 () kw P 1.3/1.1/1.1 /./ Approx. 13 (1) kw P 1.3/1.1/1.1 /./ Approx. 13 (1) Motor specifications Weight Power/ Rated Startup current (A) current (A) (kg) number 0/0/2 V 0/0/2 V of poles : /0/0 Hz : /0/0 Hz STS model kw P kw P kw P kw P 0.75kW P 2.3// 2.3// 2.3// 2.3// 3./3.2/3.1 1/9.07/9.9 1/9.07/9.9 1/9.07/9.9 1/9.07/ /17./19. Approx. 21 Approx. 21 Approx. 3 Approx. 25 Approx. 0.75kW P 3./3.2/ /17./19. Approx kW P 3./3.2/ /17./19. Approx. 3 kw P 2.3// 7.01/7.17/7.3 Approx. 75 kw P 2.3// 7.01/7.17/7.3 Approx. 75 kw P 2.3// 7.01/7.17/7.3 Approx. 75 kw P 2.3// 7.01/7.17/7.3 Approx kW P 3.9/3./ /1.5/17. Approx kW P 3.9/3./ /1.5/17. Approx kW P 3.9/3./ /1.5/17. Approx kW P 3.9/3./ /1.5/17. Approx kW P 3.9/3./ /1.5/17. Approx kW P 7.0/.2/.0 1./3./ Approx kW P 7.0/.2/.0 1./3./ Approx. 5 kw P 2.3// 7.01/7.17/7.3 Approx. 1 kw P 2.3// 7.01/7.17/7.3 Approx. 1 kw P 2.3// 7.01/7.17/7.3 Approx. 1 kw P 2.3// 7.01/7.17/7.3 Approx kW P 3.9/3./ /1.5/17. Approx kW P 3.9/3./ /1.5/17. Approx. 1 ZP STST c Pump head S: seal T: N: NBR heck ball S: 7 onnections a onnection type U: Union F: Flange b Valve structure W: Standard V: High-viscosity X: Special Notes) 1. To calculate the max. discharge volume for two pump heads or more, multiply the values for one pump head by the number of pump heads. 2. The max. indicated discharge volume is the discharge volume at the max. discharge pressure. 3. The max. dischargable viscosity is mpa s.. All motors (type/power supply) are totally enclosed fan-cooled outdoor types, 3-phase 0/0/2 V: /0/0 Hz. 5. Paint for all models is acrylic urethane resin (color: Munsell B 5/).. ontact your dealer regarding special specifications. RYP/RZ STS (Special U packing)+sus1

4 Performance urves SXPA/SYPA Model SXPA1-00 Model m SYPA1-00 Model m SXPA1-00 Model.0 m SYPA1-00 Model.0 m SXPA1-009 Model m SYPA1-009 Model SXPA1-01 Model SXPA1-01 Model SXPA1-0 Model SYPA1-0 Model m m m m m SXPA1-02 Model SYPA-02 Model MPa MPa m m Request Measure discharge volume based upon user operating conditions, and set the dial according to that performance curve. The above performance curves are examples of measurements performed under fixed conditions by test equipment at TAMINA. These curves may vary slightly due to individual on-site conditions and equipment differences. For duplex or more pump head configurations, multiple number values by the number of pump heads. onditions: Room temperature, clean water Hz 0 Hz ZP Model ZP1-0 Model 0.5 MPa MPa ZP1-02(P) Model 7.0MPa ZP1-0(P) Model 3.5MPa ZP1(P) Model 1.7MPa ZP1-02 Model MPa ZP1-0 Model MPa ZP1 Model MPa RYP/RZP Model RYP1-0 Model RY(Z)P1 Model MPa RY(Z)P1-00 Model MPa RY(Z)P1- Model (MPa) (MPa) MPa MPa (MPa) RY(Z)P1-02 Model MPa (MPa) RY(Z)P1-0 Model 2. MPa (.5MPa) 0 2

5 ontrol Variations A wide range of unique discharge volume automatic control products is available for you to choose to suit your conditions of use. Naturally, dual control that allows the discharge volume to be adjusted over a wide range is also possible. Sensor/measuring device ontroller Metering pump Proportional injection Flow rate ph Residual chlorine etc. PID controller Servo controller Inverter Electrical servo Pneumatic servo Inverter motor model Stepless gear-reduction model Stroke Length ontrol ontrol Method ontrol Equipment Features Stroke length remote control method Digital Servo ontroller DS (for electrical servo, applicable to all models) Input signal: D to ma Stroke length remotecontrolled by two servo types (electrical and pneumatic) Wide power source range (5 to 2 VA) Automatic operation output Error output and selfdiagnostics function Pump Electrical servo Pneumatic servo Stroke ount ontrol Inverter rpm control method (frequency control method) Inverter Input signals: D to ma D0 to5 V D0 to V Auto-rator Speed of general-purpose motor can be varied. Low-cost Max. speed is not influenced by power supply frequency. Stepless gear-reduction control method Dual control method Wide control range (:1) enabled by dual control of number of strokes and stroke length Max. control range of :1 is possible while maintaining high precision. Easy connection (automatic control) with flow meter or other measuring devices Operating precautions 1. Liquid containing slurry cannot be injected. Slurry or other granular objects sticking to the seal accelerates V packing (or special U packing) wear, and greatly influences discharge precision. 2. Use this pump for injecting lubricating liquids. This plunger pump causes trace amounts of liquids to leak functionally for the purposes described below to protect the seal. (1) Leaked liquid functions as lubricant to reduce seal resistance. (2) To prevention frictional heat from generating, well-lubricating oil is preferred. The following chemical solutions satisfy conditions for preventing frictional heat: Hydrazine Super phosphoric acid (condensed phosphoric acid) Organic coagulants Other oily liquids (3) The plunger pump is constructed to be sealed by V packing (or special U packing). To ensure even higher discharge precision, use pressure booster piping on this pump. To injection point

6 External Dimensions SXPA A SYPA1 G3/ 7 G3/ E D D A 1 1 B 90 1 B 7 -dia.7 Model A B D E Model A B D E dia E A D RYP E F 1 H G 11 B D A RZP E Model A B D E F G H Model A B D E F G H dia dia (21.5) (73) to - are flange models. to - are flange models F G H 127 (393.5) Product designs and specifications are subject to change without notice for product improvement. Head Office: Awajimachi, huo-ku, Osaka Japan Tel.+(0)--3 Fax.+(0)--3 URL trade@tacmina.com E-023 (5) 05 12/5/ASS JQA EM037 Production Department

CSNC CARBIDE CIRCULAR SERIES

CSNC CARBIDE CIRCULAR SERIES CSNC CARBIDE CIRCULAR SERIES HIGHLY EFFICIENT AND PRODUCTIVE HIGH SPEED CIRCULAR SAWING MACHINES CARBIDE SAWS DO THE WORK OF FIVE CONVENTIONAL FACTORY BAND SAWS, WITHOUT SACRIFICING QUALITY. GET THE CLOSE-CUT

More information

User Manual of JUNYI CKG32-S CNC Lathe

User Manual of JUNYI CKG32-S CNC Lathe User Manual of JUNYI CKG32-S CNC Lathe Before installation and use, please read this Manual first. 1 Introduction Thanks for choosing JUNYI CNC Lathes. This manual book described JUNYI CKG32-S CNC lathe

More information

LILIAN. High Precision & Excellent Performance. LILIAN, the leading milling machine builder in Taiwan, was established in 1978

LILIAN. High Precision & Excellent Performance. LILIAN, the leading milling machine builder in Taiwan, was established in 1978 LILIAN LILIAN High Precision & Excellent Performance LILIAN, the leading milling machine builder in Taiwan, was established in 1978 and has built more than twenty thousand manual & CNC milling machines

More information

EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8

EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8 EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8 KC-5 KC-8 Pump RPM 638 1022 Motor HP (kw) 0.33 (0.25) 0.50 (0.37) Oil Capacity, qts. (liters) 0.8 (0.76) Forced Drain w/ open suction, qts. (liters) 0.85 (0.80)

More information

SPECIFICATION TUMBLING DRYERS. 2 soft gelatin capsule technology leader

SPECIFICATION TUMBLING DRYERS. 2 soft gelatin capsule technology leader The model TW-R2-S is designed to manufacture soft capsules at the standard speed 6 rpm in a stable manner for the first time in the world. At such a high speed, it generates no noise and medicine is filled

More information

D.C. Hydraulic Power Systems

D.C. Hydraulic Power Systems D.C. Hydraulic Power Systems Bucher Hydraulics M-3000 Series Compact designs, integrated and manifold valve circuits Reference: 500-P-000001-EN-05 Issue: 02.2018 1/144 Contents Page 1 General information...

More information

Self contained servo drive CLDP Technical data sheet

Self contained servo drive CLDP Technical data sheet voith.com Self contained servo drive CLDP Technical data sheet Advantages + + High energy efficiency + + High dynamics + + Oil free power pack and piping are not necessary + + Sensors used provide the

More information

Proportional Directional Control Valves Nominal sizes 16 and 25

Proportional Directional Control Valves Nominal sizes 16 and 25 Proportional Directional Control Valves Nominal sizes 16 and 25 Pilot operated, electrically adjustable Interface acc. to DIN 24 340 and ISO 4401 PN [p max. ] = 315 bar 7502968.06.01.06 Description Design

More information

Pneumatic Drill / / Technical Specification

Pneumatic Drill / / Technical Specification CS UNITEC Pneumatic Drill 2 2502 0010 / 2 2502 0030 2 2506 0010 / 2 2506 0030 Technical Specification Model with Lever Throttle Model with Twist Throttle with Selfresetting 2 2502 0010 2 2502 0030 2 2506

More information

SLIDE VANE FLOW METER SPECIFICATIONS

SLIDE VANE FLOW METER SPECIFICATIONS SLIDE VANE FLOW METER SPECIFICATIONS V20051 17.09 1. Outline Slide vane flow meter is vane type positive displacement flow meter, creating high accuracy measurement and low pressure loss by decreasing

More information

Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard

Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard 5. Input Cover 6. O-Ring 7. Hex Head Cap Screw 8. Input

More information

Side. Channel Blower APEX DARGANG MACHINERY CORPORATION

Side. Channel Blower APEX DARGANG MACHINERY CORPORATION Side Channel Blower APEX DARGANG MACHINERY CORPORATION Side Channel Blower Construction External bearing Cool-running Long life Motor Industrial quality /60Hz Squired-cage motor totally enclosed(ip55 )

More information

Liquid ring vacuum pumps in compact design

Liquid ring vacuum pumps in compact design Liquid ring vacuum pumps in compact design SIHI extruvac LEME 13, LEME 155 Pressure range: Suction volume flow: 1 to 113 mbar 3 to 17 m³/h CONSTRUCTION TYPE SIHI liquid ring vacuum pumps are displacement

More information

Split case double suction centrifugal pump. Technical data Serie: DPAS C

Split case double suction centrifugal pump. Technical data Serie: DPAS C Split case double suction centrifugal pump Technical data Serie: DPAS C Table of Contents 1 Introduction 1.1 Fields of Application... 1. Pumped Liquids... 1.3 Design... 1. Bearings... 1.5 Shaft Seal...

More information

GI/EMME SERIES

GI/EMME SERIES The GI/EMME 1400-4500 series of burners covers a firing range from 820 to 4650 kw. They ave been designed for high output users and they are suitable for matching with every kind of boilers, with normal

More information

NEW VALID VT-1000 VERTICAL LATHE

NEW VALID VT-1000 VERTICAL LATHE NEW VALID VT-1000 VERTICAL LATHE The Valid VT-1000 CNC Vertical Lathe is the result of several years of collaboration between Valid Machinery of the United States and Precursor Tech Co. LTD. of Taiwan.

More information

CNC Machining Center BAZ 895n IQ

CNC Machining Center BAZ 895n IQ CNC Machining Center BAZ 895n IQ * Due to the continuous improvements of our products, some machine changes may apply. Features Use of SYNTEC control system, fully automatic production from labeling, loading,

More information

SDP Series. Solenoid dosing pumps. The right dosing choice

SDP Series. Solenoid dosing pumps. The right dosing choice SP Series Solenoid dosing pumps The right dosing choice SP Series Nowdays dosage of liquid chemical requires still greater precision and versatily of the equipment. oseuro has constantly developed motor

More information

Features. Continuous Duty Cycle Actuators

Features. Continuous Duty Cycle Actuators Features Predictable life. Continuous operation. Oil lubricated. High mechanical and thermal efficiency 2 models available. Capacity 3,500 to 27,000 pounds Available with C-Face motor adaptors and speed

More information

Servomill. Multipurpose Milling Machine Servomill. Conventional Multipurpose Milling Machine.

Servomill. Multipurpose Milling Machine Servomill. Conventional Multipurpose Milling Machine. Multipurpose Milling Machine Conventional Multipurpose Milling Machine for workshop applications, single parts production and training purposes Servo motors and preloaded ball screws on all axes infinitely

More information

- Clamshell - OD-Mounted Pipe Cutting and Beveling Machine. Split frame. cutting and beveling simultaneously

- Clamshell - OD-Mounted Pipe Cutting and Beveling Machine. Split frame. cutting and beveling simultaneously Split frame OD-Mounted Pipe Cutting and Beveling Machine The series machine is ideal for all types of pipe cutting, beveling and end preparation. The split frame design allows the machine to split in half

More information

SERIES AWEA MECHANTRONIC CO., LTD. High Rigidity Vertical Machining Centers AGENT ISO 9001 ISO 14001

SERIES AWEA MECHANTRONIC CO., LTD. High Rigidity Vertical Machining Centers AGENT ISO 9001 ISO 14001 AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 30, Taiwan TEL : +886-3-88-191 FAX : +886-3-88-194 Website : www.awea.com CENTRAL TAIWAN SCIENCE

More information

Non-contact conveyance is possible.

Non-contact conveyance is possible. Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 26-8 www.cmafh.com Cyclone Pad Non-contact conveyance is possible. Workpiece with uneven and/or viscous surface

More information

TAIZHOU FOXSEW SEWING MACHINE CO.,LTD

TAIZHOU FOXSEW SEWING MACHINE CO.,LTD Mattress Tape Edge Sewing Machine Product Name: Mattress Tape Edge Sewing Machine Model NO.: FX-WB-3 Origin: Zhejiang, China Brand Name: FOXSEW Product Details: Mattress Tape Edge Sewing Machine Description:

More information

Series 80 In-Line Mounted Centrifugal Pumps

Series 80 In-Line Mounted Centrifugal Pumps Bulletin B-G Bell & Gossett Series In-Line Mounted Centrifugal Pumps Applications Hydronic Heating & Cooling Systems Industrial Process General Service Pressure Boosting Advantages Close Coupled Space

More information

Precision Chucks for Improved Accuracy and Increased Productivity

Precision Chucks for Improved Accuracy and Increased Productivity Precision Workholding Technology Precision Chucks for Improved Accuracy and Increased Productivity Precision Air Chucks (Self Contained Design) MicroCentric Precision Air Chucks feature a patented open

More information

HAFCO METALMASTER BM-90HV. Turret Milling Machine - Horizontal - Vertical. (X) 1120mm (Y) 520mm (Z) 440mm. Product Brochure

HAFCO METALMASTER BM-90HV. Turret Milling Machine - Horizontal - Vertical. (X) 1120mm (Y) 520mm (Z) 440mm. Product Brochure Product Brochure M633D HAFCO METALMASTER BM-90HV Turret Milling Machine - Horizontal - Vertical (X) 1120mm (Y) 520mm (Z) 440mm Page 1 of 5 Specifications & Prices are subject to change without notification

More information

Inexpensive PD for Boiler Feed Water and Oil FLOWPET-EG

Inexpensive PD for Boiler Feed Water and Oil FLOWPET-EG Inexpensive PD for Boiler Feed Water and Oil FLOWPET-EG GENERAL SPECIFICATION GS.No.GBB323E-5 GENERAL FLOWPET-EG is an OVAL flowmeter primarily intended for use in boiler feed water and fuel oil metering

More information

PureAir. Oil-less Compressors

PureAir. Oil-less Compressors PureAir Oil-less Compressors 2 Oil-less Pure Air Series New Technology Creates New Applications With the perfection of oil-less air technology by Gardner Denver, new applications are being developed everyday:

More information

RCM DIRECT READING FLOWMETER

RCM DIRECT READING FLOWMETER RCM DIRECT READING FLOWMETER Flow Pressure Level Temperature measurement monitoring control Special Features Compact Design Easy to Install For Horizontal or Vertical Pipes Rugged Construction Accuracy:

More information

US80 ID CLAMPING PORTABLE TUBE AND PIPE BEVELING MACHINE TUBE AND PIPE BEVELING MACHINE

US80 ID CLAMPING PORTABLE TUBE AND PIPE BEVELING MACHINE TUBE AND PIPE BEVELING MACHINE TUBE AND PIPE BEVELING MACHINE ID CLAMPING PORTABLE TUBE AND PIPE BEVELING MACHINE PRACTICAL TOOLS INC. P.O. Box 233 Aurora, ON L4G 3H3, Canada Phone: 905-727-0014 / 888-847-8880 Fax: 905-727-8483 info@practicaltoolsinc.com

More information

CAPACITANCE TYPE LEVEL SWITCH

CAPACITANCE TYPE LEVEL SWITCH APAITANE TYPE LEVEL SWITH Our continuous product improvement has got highly stable & reliable detection come true. ALN/SL can be the best selling line with some possible improvements added in the years

More information

MCG-5X 5-axes Gantry Type Machining Center

MCG-5X 5-axes Gantry Type Machining Center TM TM MCG-5X 5-axes Gantry Type Machining Center BUFFALO MACHINERY CO., LTD. 56, Lane 318, Der Sheng Road, Ta Ya, Taichung City, Taiwan, R.O.C. P.O. Box 32, Ta Ya, Taichung City, Taiwan R.O.C. Tel: 886-4-25

More information

KFS-EM. Overall length. Al. PTFE coated Alu, painted Al. coated Methacrylate / acrylic nitrite

KFS-EM. Overall length. Al. PTFE coated Alu, painted Al. coated Methacrylate / acrylic nitrite KFS Flap Flow Meter KFS suitable for H, acids, alkalis and gases spring-loaded horizontal or vertical flow direction low pressure loss mainly viscosity independent optional threshold value contacts optional

More information

FLOWPET-EG. Description 1 Accumulated total flow (8-digit) 2 Instantaneous flowrate, L/h (mode:b1) and L/min (mode:b2) Selectable with

FLOWPET-EG. Description 1 Accumulated total flow (8-digit) 2 Instantaneous flowrate, L/h (mode:b1) and L/min (mode:b2) Selectable with GENERAL SPECIFICATION FLOWPET-EG MODEL LS 7 6 7-4 GS.No.GBB323-1-E GENERAL FLOWPET-EG is an OVAL flowmeter primarily intended for use in boiler feed water and fuel oil metering applications. Field proven

More information

ZHEJIANG TIANWEI MACHINERY CO.,LIMITED

ZHEJIANG TIANWEI MACHINERY CO.,LIMITED ZHEJIANG TIANWEI MACHINERY CO.,LIMITED Product Catalogue 1.Edm wire wire cut cut 2.EDM DIE DIE SINKER 3.EDM DRILL 1.2 1.2 Company profile Our company apply ISO9001 quality system, and uses 8S for quality

More information

A Division of Engtek Manoeuvra Systems Pte Ltd. SubSea Propulsion Technology

A Division of Engtek Manoeuvra Systems Pte Ltd. SubSea Propulsion Technology Engtek SubSea Systems A Division of Engtek Manoeuvra Systems Pte Ltd SubSea Propulsion Technology SubSea Hydraulic Thruster Systems The enclosed data, information, description, photos and illustrations

More information

1- Horizontal wire drawing machine

1- Horizontal wire drawing machine 1- Horizontal wire drawing machine Horizontal drawing machine is used to draw high, medium and low carbon steel, as well as copper, aluminum and alloy. It is easy to operate and maintain, the two Capstans

More information

FLOWPET-NX (Oil Service Mechanical Register)

FLOWPET-NX (Oil Service Mechanical Register) FLOWPET-NX (Oil Service Mechanical Register) GENERAL SPECIFICATION GS.No.GBB322-6-E GENERAL Flowpet-NX is an OVAL flowmeter primarily developed for boiler feed water and fuel oil measurement. Field proven

More information

Proportional Directional Control Valves Size 6

Proportional Directional Control Valves Size 6 Proportional Directional Control Valves Size 6 Direct operated, positioncontrolled Interface to DIN 2 30 and ISO 0 PN [p max. ] = 35 bar 75079.06.03.06 Description (standard units) Design The proportional

More information

Improved productivity for complex machining. Sliding Headstock Type CNC Automatic Lathe

Improved productivity for complex machining. Sliding Headstock Type CNC Automatic Lathe Improved productivity for complex machining Sliding Headstock Type CNC Automatic Lathe Cincom Technology, Support and Financing. Marubeni Citizen-Cincom is your single source provider of Swiss type lathes

More information

Density (Consistency) Meter LQ500

Density (Consistency) Meter LQ500 Density (Consistency) Meter LQ500 Introduction The LQ500 density (consistency) meter uses microwave phase shift technology to determine concentrations of solids in the material to be measured flowing through

More information

OVAL FLOWMETER. Meter Size: 52, 53, 55, 56, 57 Double Case Construction with Powerful Magnetic Coupling ( ) Magnetic coupling Outer Housing

OVAL FLOWMETER. Meter Size: 52, 53, 55, 56, 57 Double Case Construction with Powerful Magnetic Coupling ( ) Magnetic coupling Outer Housing OVAL FLOWMETER : 5, 53,, 56, 57 Double Case Construction with Powerful Magnetic Coupling ( ) Liquid GENERAL SPECIFICATION GS.No.GBB5E 7 GENERAL The OVAL flowmeter is a positive displacement type flowmeter

More information

Series 4310 A Partnership for Success Series Battioni P agani Battioni Pagani Series Pompe natv ac.c om

Series 4310 A Partnership for Success Series Battioni P agani Battioni Pagani Series Pompe natv ac.c om Vacuum Pumps & Blowers 4310 Blower A Partnership for Success Commercial duty Battioni Pagani Battioni Pagani Pompe Vacuum pumps & Blowers Vacuum / Pressure Pumps MEC 2000-4000 607 - National Vacuum Equipment

More information

Multipurpose Milling Machine Servomill 700. Conventional Multipurpose Milling Machine.

Multipurpose Milling Machine Servomill 700. Conventional Multipurpose Milling Machine. Multipurpose Milling Machine Conventional Multipurpose Milling Machine For workshop application, single parts production and training purposes Servo motors and preloaded ball screws on all axes Infinitely

More information

Non-contact conveyance is possible.

Non-contact conveyance is possible. Cyclone Pad Non-contact conveyance is possible. Supply port Nozzle Workpiece with uneven and/or viscous surface Solar battery cell Whirlwind flow Air layer Electrode line Reflection prevention (viscous)

More information

Density (Consistency) Meter

Density (Consistency) Meter Density (Consistency) Meter LQ500 Introduction The LQ500 density (consistency) meter uses microwave phase shift technology to determine concentrations of solids in the material to be measured flowing through

More information

Chlorine Control Valve C 7700

Chlorine Control Valve C 7700 BW 2 07 0 / List of contents. General 2. Functional description 3. Scope of delivery 4. Safety instructions 5. Installation 5. Hydraulic installation 5.2 Electrical connection 6. Startup 6. Potentiometer

More information

[2- and 3-way vacuum solenoid valves]

[2- and 3-way vacuum solenoid valves] [2- and 3-way 07.. 16 = 3 vie 07.. 20 = 2 vie Developed specifically for, they are direct-acting, normally closed. The two-way valves have considerably large orifices compared to their sizes. The three-way

More information

August 7, 2014 i 50 High-Speed Horizontal Machining Center for Mass Production Revolutionizing Automotive Parts Machining

August 7, 2014 i 50 High-Speed Horizontal Machining Center for Mass Production Revolutionizing Automotive Parts Machining Press Release Head Office: 2-35-16 Meieki, Nakamura-ku, Nagoya City 450-0002, Japan TEL: +81(0)52-587-1811 FAX: +81(0)52-587-1818 August 7, 2014 i 50 High-Speed Horizontal Machining Center for Mass Production

More information

DISKUS Double-Face-Grinding-Machines. Series: DDS 457 XR DDS 600 XR DDS 750 XR

DISKUS Double-Face-Grinding-Machines. Series: DDS 457 XR DDS 600 XR DDS 750 XR DISKUS Double-Face-Grinding-Machines Series: DDS 457 XR DDS 600 XR DDS 750 XR DDS 457 600 750 XR Three grinding methods meeting different production problems: 1. Through-feed grinding For large mass-production

More information

GEA Screw Packages. Plug & play compressor units for industrial refrigeration and air conditioning

GEA Screw Packages. Plug & play compressor units for industrial refrigeration and air conditioning GEA Screw Packages Plug & play compressor units for industrial refrigeration and air conditioning 2 3 Top quality based on proven development Whether it s in the food industry, chemical industry, in offices

More information

FSG SP Series HIGH PRECISION SURFACE GRINDER 612SP 618SP 818SP FSG-618M FSG-2A618 FSG-2A818 3A818 FSG-2A1224 3A1224

FSG SP Series HIGH PRECISION SURFACE GRINDER 612SP 618SP 818SP FSG-618M FSG-2A618 FSG-2A818 3A818 FSG-2A1224 3A1224 FSG SP Series HIGH PRECISION SURFACE GRINDER 612SP 618SP 818SP FSG-618M FSG-2A618 FSG-2A818 3A818 FSG-2A1224 3A1224 612/618/818 SP SUPER PRECISION SURFACE AND FORM GRINDER MACHINE FEATURES Table traverses

More information

Compact Hydraulic System for Energy Savings and High Precision. POWER Meister

Compact Hydraulic System for Energy Savings and High Precision. POWER Meister Compact Hydraulic System for Energy Savings and High Precision POWER Meister POWER Meister Compact Hydraulic System Superior Energy Savings High Precision AC servo motor controls rotational speed and direction

More information

SEAMLESS TECHNOLOGY ELECTRONIC SEAMLESSWEAR KNITTING MACHINE SM4-C SINGLE JERSEY

SEAMLESS TECHNOLOGY ELECTRONIC SEAMLESSWEAR KNITTING MACHINE SM4-C SINGLE JERSEY ELECTRONIC SEAMLESSWEAR KNITTING MACHINE Single jersey electronical circular machine with 4 feeds in diameters from 7 to 10 with 2 points of monomagnetic selection per feed (by 3 technical ways). It allows

More information

Basket & Screen Data. Cylindrical baskets for simplex and duplex strainers up to 8" size

Basket & Screen Data. Cylindrical baskets for simplex and duplex strainers up to 8 size Basket & Screen Data Cylindrical baskets for simplex and duplex strainers up to 8" size Slant top baskets for Model 510 simplex and Model 570 duplex strainers sizes 8" to 36" Basket and Screen Design The

More information

Fully understand the features above and select the equipment that suits your operating conditions.

Fully understand the features above and select the equipment that suits your operating conditions. 1 Features and Precautions for Vacuum Adsorption Vacuum adsorption system as a method to hold a workpiece has the following features. Easy construction Compatible with any place where adsorption is possible.

More information

110FC STRAIGHT LINE EDGER VICTRALUX 110FC MODEL VICTRALUX 110FC

110FC STRAIGHT LINE EDGER VICTRALUX 110FC MODEL VICTRALUX 110FC STRAIGHT LINE EDGER VICTRALUX MODEL STRUCTURE AND MACHINE DESCRIPTION The straight line edger is made up of a pair of shoulders of considerable length (200 mm) connected by a base. The beams have been

More information

Drilling and Tapping. A Buyers Guide.

Drilling and Tapping. A Buyers Guide. Drilling and Tapping A Buyers Guide www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence, maximising

More information

InVue Integrated Flow Controllers NT6510, NT6520

InVue Integrated Flow Controllers NT6510, NT6520 DVNED MTERILS HNDLING InVue Integrated Flow ontrollers NT6510, NT6520 Precise point-of-use chemical flow control Entegris is solving today s flow control challenges using innovative flow control technology.

More information

2SP1 January 2018 siemens.de/spindeln

2SP1 January 2018 siemens.de/spindeln Milling Motorspindle 2SP1 January 2018 siemens.de/spindeln Standardized milling motor spindle 2SP1 Compact and all-inclusive in the spindle box Increasing requirements for higher metal removal rates with

More information

VERTICAL FORM FILL SEAL MACHINES

VERTICAL FORM FILL SEAL MACHINES VERTICAL FORM FILL SEAL MACHINES AUTOMATIC PACKAGING MACHINES 49 Vertical Form, Fill Seal Machines: With over 30 years experience, Audion manufactures a complete line of reliable, flexible, low maintenance,

More information

SPLIT FRAMES CLAMSHELLS ORBITAL TUBE AND PIPE CUTTING AND BEVELLING MACHINES TT

SPLIT FRAMES CLAMSHELLS ORBITAL TUBE AND PIPE CUTTING AND BEVELLING MACHINES TT ORBITAL TUBE AND PIPE CUTTING AND BEVELLING MACHINES TT TTNG TTNG ORBITAL TUBE AND PIPE CUTTING AND BEVELLING PORTABLE PIPE SEVERING! MACHINES LIGHT WEIGHT VERSATILE RELIABILITY SAFE USE UNDER ALL CONDITIONS

More information

K series VK-1060 VERTICAL MACHINING CENTER

K series VK-1060 VERTICAL MACHINING CENTER K series VK-1060 VERTICAL MACHINING CENTER VK-1060 VERTICAL MACHINING CENTER B ringing the most flexible & most competitive advantage of TWiNHOrN to a broader range of machining applications. From prototype

More information

MP RAM. Series FLOOR TYPE HYDROSTATIC BORING MILLING MACHINES

MP RAM. Series FLOOR TYPE HYDROSTATIC BORING MILLING MACHINES MP RAM Series FLOOR TYPE HYDROSTATIC BORING MILLING MACHINES POWER ROBUSTNESS PRECISION JUARISTI founded in 1941 has been designing and manufacturing high precision boring and milling machines for over

More information

Overview Grinding Applications

Overview Grinding Applications GRINDING 14E Overview Grinding Applications SRG Workpieces High precision grinding Steady Rests Grinding diameter Ø 20-85 mm Camshafts Crankshafts Shafts Chapter 1 Fine adjustment of the grinding center

More information

Advanced Technologies Diversified Solutions

Advanced Technologies Diversified Solutions Advanced Technologies Diversified Solutions HAI Technologies 2016 Commercial in Confidence Subsea Chemical Injection - SCIU Subsea Chemical Injection Unit - SCIU HAI Technologies Chemical Delivery System

More information

COMPACT CASSETTE TYPE AIR CONDITIONER

COMPACT CASSETTE TYPE AIR CONDITIONER COMPACT CASSETTE TYPE AIR CONDITIONER TECHNICAL MANUAL CONTENTS 1.FEATURE... 1 2.OUTLINE AND DIMENSIONS... 2.1 INDOOR UNIT... 2.2 OUTDOOR UNIT... 4.DATA....1 PERFORMANCE CURVE....2 TEMPERATURE RANGE....

More information

Proportional Directional Control Valves Size 6

Proportional Directional Control Valves Size 6 Proportional Directional Control Valves Size 6 Direct controlled, electrically adjustable Interface to DIN 2 30 and ISO 0 PN [p max. ] = 35 bar 750055.06.02.06 Description (standard units) Design The proportional

More information

Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4

Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016

More information

Characteristics curve Fluid: water p: 1 bar. Weight. Sectional diagram. no. [kg]

Characteristics curve Fluid: water p: 1 bar. Weight. Sectional diagram. no. [kg] otorised valve For neutral gases and liquids G / to G female thread Cartridge system ublication 7559.06.06.97 Operating pressure -0.9 to 0 bar (see table) Catalogue index 6 0 series Description (standard

More information

MATERIAL COMBINATION NUMBER 2: Corrosive environment requiring harder, wear-resistant seating faces and resistance to dezincification.

MATERIAL COMBINATION NUMBER 2: Corrosive environment requiring harder, wear-resistant seating faces and resistance to dezincification. Cast Iron Slide Gates Spec Sheet General The contractor shall furnish and install the following cast iron slide gate assemblies as listed on the Gate Schedule and detailed on the manufacturer s drawings.

More information

Genuine Metaris Telescopic Cylinders

Genuine Metaris Telescopic Cylinders Genuine Metaris Telescopic Cylinders Reliable, Smooth Operating and Totally Interchangeable 3, 4 and 5 Stage Single Acting Telescopic Cylinders Genuine Metaris MH series pin mount and trunnion mount telescopic

More information

DOOR AND WINDOW COPE & STICK SYSTEMS HIGH PERFORMANCE PRODUCTION

DOOR AND WINDOW COPE & STICK SYSTEMS HIGH PERFORMANCE PRODUCTION DOOR AND WINDOW COPE & STICK SYSTEMS HIGH PERFORMANCE PRODUCTION P99-1 R-10C SINGLE END COPING SYSTEM Designed for a dedicated and accurate coping center with single or multiple part capability. Operation

More information

LQ510. Density (Consistency) Meter. Introduction. Specifications EJL- 123

LQ510. Density (Consistency) Meter. Introduction. Specifications EJL- 123 Density (Consistency) Meter LQ510 Introduction The LQ510 Sanitary Density Meter is designed for application using clamp connection in the food and beverage industries. The LQ510 uses microwave phase shift

More information

CHENG KUANG WOOD MACHINERY WORKS CO., LTD.

CHENG KUANG WOOD MACHINERY WORKS CO., LTD. Three initial infeed tables. Automatic feed to pre-press assemble stand. CHENG KUANG WOOD MACHINERY WORKS CO., LTD. Fully Auto Finger Jointing Line Turn your wood waste into valuable material and create

More information

Bevel Gear Hobbing Machine THB 350 CNC

Bevel Gear Hobbing Machine THB 350 CNC Bevel Gear Hobbing Machine THB 350 CNC 1. The characteristics of the machine THB 350 CNC is spiral bevel gear milling machine with six CNC axes. This is milling machine of high stiffness high precision

More information

APPLICATION. Paper PE Coating Single or Double PE Coated Paper(180~400g/ m2 ) Ceramic Hot Air, Heater or Ultrasonic Sealing

APPLICATION. Paper PE Coating Single or Double PE Coated Paper(180~400g/ m2 ) Ceramic Hot Air, Heater or Ultrasonic Sealing Main item -Transfer hose to counting stacker -One specified Mold installed -Machine cover -Electric control box -Counter / Stacker -Spare parts / Tools Main specification -Use: Hot & Cold drink, Ice cream

More information

NEMO BO/BS Pump with Hopper in Block Construction and Flanged Drive

NEMO BO/BS Pump with Hopper in Block Construction and Flanged Drive NEMO BO/BS Pump with Hopper in Block Construction and Flanged Drive The ideal pump for crumbly media in a compact design. tabposition1contentblockidentifiertab-6018-1-605-0content Universally applicable

More information

SERVICE INSTRUCTIONS Model 9670 Lubricant Pump

SERVICE INSTRUCTIONS Model 9670 Lubricant Pump TM TM SERVICE INSTRUCTIONS Model 9670 Lubricant Pump 9670 DESCRIPTION Model 9670 Lubricant Pump is designed to pump light to heavy oils directly from the original container. This design features a 10:1

More information

TWIN ROD CYLINDERS 6 CONTENTS

TWIN ROD CYLINDERS 6 CONTENTS CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG TWIN ROD CYLINDERS6 CONTENTS TWIN ROD CYLINDERS 6 Features 745 Specifications/Order Codes 747 Inner Construction and Major Parts 748 Dimensions

More information

Electronically controlled proportional pressure regulating valves

Electronically controlled proportional pressure regulating valves Overview Description airfit control Electronically valve G1/4, G3/8, Type SRE-.. airfit control Electronically valve G3/8, G1/2, Type CRE-.. airfit control Electronically valve G3/4, G1, Type A25RE-..

More information

Magnetic-inductive flow meter. PITe / UMF2. Technical Datasheet. Maintenance-free Nearly no pressure drop Robust design Easy installation and start-up

Magnetic-inductive flow meter. PITe / UMF2. Technical Datasheet. Maintenance-free Nearly no pressure drop Robust design Easy installation and start-up Magnetic-inductive flow meter Technical Datasheet PITe / UMF2 Maintenance-free Nearly no pressure drop Robust design Easy installation and start-up Subject to change without notice 1 Function An electrically

More information

C SERIES LATHES AFFORDABLE. DURABLE. VERSATILE. A line of precision, high performance geared head and variable speed lathes. TURNING PRODUCT CATALOG

C SERIES LATHES AFFORDABLE. DURABLE. VERSATILE. A line of precision, high performance geared head and variable speed lathes. TURNING PRODUCT CATALOG TURNING PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 C SERIES LATHES AFFORDABLE. DURABLE. VERSATILE. A line of precision, high performance geared head and variable speed lathes. HIGH SPEED

More information

MOTORIZED VALVES SHANGHAI INJOY INDUSTRY CO.,LTD.

MOTORIZED VALVES SHANGHAI INJOY INDUSTRY CO.,LTD. MOTORIZED VALVES SHANGHAI INJOY INDUSTRY O.,LTD. MOTORIZED VALVE Ball Butterfly PAGE 1 Motorized heck Globe Gate Knife Gate M Series EAB Series Electric Actuator EAH Series H Series KE Series! Specialize

More information

RECIPROCATING COMPRESSORS. Pureair. your constant workforce for compressed air

RECIPROCATING COMPRESSORS. Pureair. your constant workforce for compressed air COMPRESSORS RECIPROCATING Pureair your constant workforce for compressed air OIL-LESS New Technology Creates New Applications With the perfection of oil-less air technology by Gardner Denver, new applications

More information

INSTRUCTION MANUAL SERIES TRANSMITTER

INSTRUCTION MANUAL SERIES TRANSMITTER INSTRUCTION MANUAL 284-512 SERIES TRANSMITTER TABLE OF CONTENTS General Description........................... Pg 1 Specifications............................... Pg 2 Installation..................................

More information

High Precision Air Chucks

High Precision Air Chucks Precision Workholding Solutions High Precision Air Chucks www..com Improve productivity and lower the cost of secondary machining operations..... through high concentricity. Holding close concentricity

More information

2-Spindle Horizontal CNC lathes

2-Spindle Horizontal CNC lathes 2-Spindle Horizontal CNC lathes 2-Spindle Horizontal CNC lathes 2SP series machines are true 2-spindle lathes that boast space savings and high productivity Max turning diameter length: ø0 0 Max turning

More information

DynaPower Generation II

DynaPower Generation II DynaPower Generation II Return to DYNAPOWER index Return to MAIN index GENERATION II 2.0 DYNAPOWER MODEL 2.0 VARIABLE PUMP PARTS DRAWING GENERATION II 2.0 DYNAPOWER MODEL 2.0 VARIABLE PUMP PARTS DRAWING

More information

V & W Series. Clean Compressed Air. Medical and Industrial Packages. All Units Built to ISO 9001 Standards

V & W Series. Clean Compressed Air. Medical and Industrial Packages. All Units Built to ISO 9001 Standards V & W Series 5 15 HP Oil-less Reciprocating Air Compressor Systems Clean Compressed Air Medical and Industrial Packages All Units Built to ISO 9001 Standards 2 Oil-Less Air Compressors New Technology Creates

More information

MUELLER GAS. DH-5/EH-5 Drilling. Reliable Connections. DH-5 Drilling Machine General Information 2. EH-5 Drilling Machine General Information 3

MUELLER GAS. DH-5/EH-5 Drilling. Reliable Connections. DH-5 Drilling Machine General Information 2. EH-5 Drilling Machine General Information 3 operating Instructions manual MUELLER GAS TAble of contents PAGE DH-5 Drilling Machine General Information 2 DH-5/EH-5 Drilling EH-5 Drilling Machine General Information 3 Operating Instructions 4-5 DH-5

More information

TPV 1200 BTB. Variable Displacement Closed Loop System Axial Piston Compact Tandem Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 160 / 0516 / E

TPV 1200 BTB. Variable Displacement Closed Loop System Axial Piston Compact Tandem Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 160 / 0516 / E HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415

More information

Ambient Conditions. Operating Conditions. Pressure

Ambient Conditions. Operating Conditions. Pressure Temperature Relative Humidity -20 C +75 C 0% 100 RH to 65 C non condensing 86 106 bar 4.0MPa (DN10 DN80) 1.6MPa (DN100 DN150) 1.0MPa (DN200 DN1000) Remote version < 80 C (rubber coating) Compact version

More information

WATERFLUX 3000 Quick Start

WATERFLUX 3000 Quick Start WATERFLUX 3000 Quick Start Electromagnetic flowmeter The documentation is only complete when used in combination with the relevant documentation for the signal converter. KROHNE CONTENTS WATERFLUX 3000

More information

2-pole design. New: Semi-hermetic compressors with 2-pole drive motor for mains voltages of 60 Hz. Now for 60 Hz mains voltage

2-pole design. New: Semi-hermetic compressors with 2-pole drive motor for mains voltages of 60 Hz. Now for 60 Hz mains voltage 2-pole design Semi-hermetic compressors with 2-pole drive motor for mains voltages of Hz New: Now for Hz mains voltage Baureihe HG series HG 2-pole 2-polig - t a glance t a glance Based on our compressors

More information

SPIRAL BEVEL GEAR HOBBING MACHINE THB 600 CNC

SPIRAL BEVEL GEAR HOBBING MACHINE THB 600 CNC SPIRAL BEVEL GEAR HOBBING MACHINE THB 600 CNC TOS-013-US-02-2018 - 2 - 1. The characteristics of the machine 2. Overview Introduction of the Machine s Overall Structure, Function, and Control etc. THB

More information

Circular Cold Saws and Systems for every application. Competence in Circular Cold Sawing Technology

Circular Cold Saws and Systems for every application. Competence in Circular Cold Sawing Technology Circular Cold Saws and Systems for every application Competence in Circular Cold Sawing Technology 2 VMS-Range Vertical Circular Cold Saws Manual, semi-automatic and automatic machines Robust and durable.

More information

STC Hydraulic grinding milling machine for cylinder heads and blocks. BERCO S.p.A. A Company of ThyssenKrupp

STC Hydraulic grinding milling machine for cylinder heads and blocks. BERCO S.p.A. A Company of ThyssenKrupp STC 361-1300 Hydraulic grinding milling machine for cylinder heads and blocks A Company of ThyssenKrupp BERCO S.p.A. The machine and its executions - from grinding wheel to tool: 1 - from tool to milling

More information

ACP 160. Cylinder boring machine. BERCO S.p.A. A Company of ThyssenKrupp Technologies

ACP 160. Cylinder boring machine. BERCO S.p.A. A Company of ThyssenKrupp Technologies ACP 160 Cylinder boring machine A Company of ThyssenKrupp Technologies BERCO S.p.A. ACP 160 Cylinder boring machine Berco's high productivity ACP160 series presents the ultimate in engine block boring

More information