Meter, PD Series JB10-S6, S7

Transcription

1 PARTS LIST MEASUREMENT SOLUTIONS Meter, PD Series JB10-S6, S7 Bulletin PO01020 Issue/Rev. 0.1 (7/14) We put you first. And keep you ahead.

2 2 Bulletin PO01020 Issue/Rev. 0.1 (7/14) Inner Mechanism

3 Item Description Qty. Part Number 1 Adapter, Calibrator Adjusting Adapter: Standard and ATC ATG Blank, Snap In Bolt, Eye: Pre Current Calibrator: Manual With ATC (Standard) With ATC (Special Temperature or API) xxx Dummy Calibrator Cap, Pipe Clamp, Oil Tube Coupling Assembly: Standard, Used on 3/16" Shaft used on Xmitters with 1/4" Shaft Pin Coupling, Drive Cover: With Vent Kit: S S Without Vent Kit (Pre 2004): S S Vent: 12 Vent Housing Pipe Plug, 2" NPT Pipe Plug, 1/2" NPT Screw Washer O-Ring Spacer Fitting Adapter Elbow /8" Tubing Cover, Knob Gasket, Cover Plate @2 Gland, Packing: Buna-N PTFE Housing, Outer: S S Nipple, Pipe: Standard NACE Nut, Hex Heavy, Meter Cover: S S O-Ring, Cover: Buna-N Viton Polytetrafluoroethylene (PTFE). Bulletin PO01020 Issue/Rev. 0.1 (7/14) 3

4 Item Description Qty. Part Number 30 + O-Ring, Packing Gland: Buna-N Viton Pin, Locating Dowel Pin, Groove, 5/64 x 1/2" Plate, Caution Plate, Cover * Plate, Lubrication Plug, Pipe, 1/2" NPT: Standard NACE Screw, Adapter Cover Screw, Base Plate, #10-32 x 7/8" Screw, Calibrator Mount #6-32 x 5/16" Screw, Cover Plate, #10-32 x 3/8" Screw, Drive, Caution Plate Screw, Knob Cover, #10-24 x 3/4" Screw, Nozzle to Inner Mech: 5/8-11 x 3-1/4" NACE Screw, Packing Gland: 7/16-14 x 1-1/2" Seal, Lead and Wire Shaft Assembly, Calibrator: S S Coupling, Lower Drive Coupling, Upper Drive Shaft: S S Pin, Groove, 5/64 x 1/2" Stem Assembly, Adjusting Ball Plate, Base Plate, Retainer Spring, Knob Stem, Adjusting Stud, Meter Cover: S S Tube, Oil Washer, Cinch Bolt Washer Inner Mechanism Item Description Qty. Part Number 61 Base Block: Standard (Up to 1,000 SSU) Hi-Viscosity 1 - For 1,000 SSU to 3,000 SSU Hi-Viscosity 2 - For 3,000 SSU to 5,000 SSU Hi-Viscosity 3 - For 5,000 SSU to 10,000 SSU Body Bolt, Eye Bulletin PO01020 Issue/Rev. 0.1 (7/14)

5 Inner Mechanism Item Description Qty. Part Number 65 Cap, Adjusting Screw Shaft, Drive Gear Cover: With Vent Without Vent Dowel, Cover and Base Fitting, Pitot Gear, Calibrator Drive: Barrels, Standard and All Iron Barrels, LPG Hectoliters, Standard and All Iron Hectoliters, LPG * Bushing: Standard and All Iron LPG Pin Gear, Idler: Barrels, Standard and All Iron Barrels, LPG Hectoliters, Standard and All Iron Hectoliters, LPG Bushing, LPG Gear, Jackshaft Gear, Jackshaft Pinion: Barrels and Hectoliters Imperial Gallons Lug, Lifting, Rotor Assembly Nut, Rotor Shaft, 1-1/2" Pin, Cotter, 1/16 x 1/2" Pin, Groove, 3/32 x 1/2" Plug, Pipe, 1/2" NPT Rotor and Blade Assembly: Standard All Iron LPG Bar, Adjusting Bearing, Rotor: Standard and All Iron LPG Bearing, Thrust: R Standard and All Iron R LPG Blade Assembly, Lower: Standard and LPG (Up to 1,000 SSU) All Iron (Up to 1,000 SSU) Std. Modified for 1,000 SSU to 3,000 SSU Std. Modified for 3,000 SSU to 5,000 SSU Std. Modified for 5,000 SSU to 10,000 SSU Std. Modified for 200 F Max Std. Modified for 1,000 SSU to 3,000 SSU and 200 F Std. Modified for 3,000 SSU to 5,000 SSU and 200 F Std. Modified for 5,000 SSU to 10,000 SSU and 200 F A.I. Modified for 5,000 SSU to 10,000 SSU Bearing, Blade: Nylon Retainer Bushing, Blade Pin, Cotter, 3/32 x 1-1/4" Shaft, Blade Bearing Bulletin PO01020 Issue/Rev. 0.1 (7/14) 5

6 Inner Mechanism Item Description Qty. Part Number 91 + Blade Assembly, Middle: Standard (Up to 1,000 SSU) and LPG All Iron (Up to 1,000 SSU) Std. Modified for 1,000 SSU to 3,000 SSU Std. Modified for 3,000 SSU to 5,000 SSU Std. Modified for 5,000 SSU to 10,000 SSU Std. Modified for 200 F Max Std. Modified for 1,000 SSU to 3,000 SSU and 200 F Std. Modified for 3,000 SSU to 5,000 SSU and 200 F Std. Modified for 5,000 SSU to 10,000 SSU and 200 F A.I. Modified for 5,000 SSU to 10,000 SSU Bearing, Blade: Nylon Retainer Bushing, Blade Pin, Cotter, 3/32 x 1-1/4" Shaft, Blade Bearing Blade Assembly, Upper: Standard (Up to 1,000 SSU) and LPG All Iron (Up to 1,000 SSU) Std. Modified for 1,000 SSU to 3,000 SSU Std. Modified for 3,000 SSU to 5,000 SSU Std. Modified for 5,000 SSU to 10,000 SSU Std. Modified for 200 F Max Std. Modified for 1,000 SSU to 3,000 SSU and 200 F Std. Modified for 3,000 SSU to 5,000 SSU and 200 F Std. Modified for 5,000 SSU to 10,000 SSU and 200 F A.I. Modified for 5,000 SSU to 10,000 SSU Bearing, Blade: Nylon Retainer Bushing, Blade Pin, Cotter, 3/32 x 1-1/4" Shaft, Blade Bearing Cam and Shaft Assembly Cam Key Shaft Collar Cone, Shaft Key Lock, Rotor Bearing, Lower Lock, Rotor Bearing, Upper Nut, Adjusting Screw, 1/2"-20 UNF-2B Pin, Roll, 5/32 x 1" Pin, Rotor Cover Roller Plate, Rotor Cover Roller Pin Plate, Lock Assembly Plate, Rotor Gear Pin, Dowel Roller, Rotor Cover Rotor, Sub Assembly: Standard (Up to 1,000 SSU) Std. Modified for 1,000 SSU to 3,000 SSU Std. Modified for 3,000 SSU to 5,000 SSU Std. Modified for 5,000 SSU to 10,000 SSU Dowel Screw, Cap, 3/8"-16 UNC-2A, Drilled Bulletin PO01020 Issue/Rev. 0.1 (7/14)

7 Inner Mechanism Item Description Qty. Part Number Sleeve, Lower: (1993 to present) (Prior to 1993) Sleeve, Upper: (1993 to present) (Prior to 1993) Screw, Adjusting Screw, Cap, 1/4-20 x 1/2" Screw, Cap, 3/8-16 x 1-1/4" R Washer, Flat Screw, #10-32 x 3/8" Nylock Screw, Adjusting Screw Cap, 5/16-18 x 1-1/4" Screw, Body, 5/8-11 x 1-3/4" Screw, Body to Block, 1/2-13 x 1-1/ * Screw, Drive, Caution Tag Screw, Pitot, #10-32 x 1/2" Screw, Set, 1/4-20 x 1/4" Shaft, Idler Gear Sleeve, Assembly: Standard and All Iron LPG Bushing: Standard and All Iron LPG * Tag, Caution Washer Washer: Standard and All Iron LPG Washer, Flat Washer, Lock Inner Mechanism General Assembly Numbers Barrel Geared, Standard Barrel Geared, All Iron Trim Barrel Geared, LPG Trim Hectoliter Geared, Standard Hectoliter Geared, All Iron Trim Hectoliter Geared, LPG Trim * Not illustrated. + Recommended stock. R Indicates change since last Note 1:.When ordering, include meter model and gearing, temperature and API gravity, and Note 2:... See Form No. PO01042 for Note 3:.Only standard gearing is listed. For additional gearing combinations, see Gear Train Bulletin Note 4:.Apply a small amount of Loctite (Part No ) to sleeve before installing in rotor. Bulletin PO01020 Issue/Rev. 0.1 (7/14) 7

8 We put you first. And keep you ahead. The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently in effect. Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed and are no longer in effect. Contact information is subject to change. For the most current contact information, visit our website at and click on the Contact Us link in the left-hand column FMC Technologies. All rights reserved. PO01020 Issue/Rev. 0.1 (7/14) FMC Technologies Measurement Solutions, Inc. 500 North Sam Houston Parkway West, Suite 100 Houston, Texas USA P: USA Operation 1602 Wagner Avenue Erie, Pennsylvania USA P: Germany Operation Smith Meter GmbH Regentstrasse Ellerbek, Germany P: