KIT BUILDING ED SCHULTZ
|
|
- Rodger Adams
- 5 years ago
- Views:
Transcription
1 KIT BUILDING ED SCHULTZ
2 KIT BUILDING FIVE BASIC MATERIALS: PLASTIC (STYRENE) WOOD LASER CUT & STANDARD PLASTER METAL RESIN ADDING DETAILS
3 PLASTIC KITS TYPICALLY STYRENE TYPE PLASTIC DPM WALTHERS BACHMANN CON-COR
4 PLASTIC KITS
5 PLASTIC KITS
6 PAINTING PLASTIC KITS WASH ALL PLASTIC PARTS BEORE PAINTING/ASSEMBLY USE ANY TYPE OF SPRAY PAINT (SPRAY BOMBS) RED PRIMER MAKES EXCELLENT BRICK COLOR WATER BASED PAINTS ALSO WORK WELL (POLLY S) CRAFT PAINTS CAN ALSO BE USED
7 GLUING PLASTIC KITS ENSURE SURFACES TO BE BONDED ARE NOT PAINTED. CLEAN ANY PAINT AT THE JOINT TO BE GLUED IF MODEL HAS BEEN PRE- PAINTED. SURFACES TO BE BONDED NEED TO BE FLUSH AND CLEAN HOLD PIECES TOGETHER AND APPLY GLUE DO NOT USE BRUSH THAT COMES WITH LIQUID GLUE USE MICRO-BRUSHES FOR GLUE APPLICATION
8 GLUING PLASTIC KITS ONLY ONE TYPE OF GLUE SHOULD BE USED FOR PLASTIC KITS STYRENE COMPATIBLE GLUE (SIMILAR TO MEK) TENAX 7R DRIES IN LESS THAN 10 SECONDS TESTORS LIQUID TAKES LONGER THAN TENAX TESTORS GEL COMES IN A TUBE NOT A LIQUID TAKES ABOUT MINUTES TO DRY LEAVES SOME RESIDUE WHEN DRY APPLY LIQUID GLUES WITH A MICRO-BRUSH USE ANY OF THE ABOVE WITH ADEQUATE VENTILATION!
9 PLASTIC KITS
10 PLASTIC KITS A WORD TO THE WISE VOICE OF EXPERIENCE! BUILD SOMETHING SIMILAR TO PREVET GLUE BOTTLES FROM TIPPING OVER
11 PLASTIC KITS DRAFT ANGLES USED ON MOLDS TO ENSURE PARTS ARE EASILY RELEASED MOST NOTICABLE ON DPM KITS WALL CASTINGS ARE FAIRLY THICK SINCE DETAIL PARTS ARE CAST ON THEM
12 DRAFT ANGLE CASTING DETAIL SIDE OF CASTING MOLD DESIRED MOLD & CASTING
13 DRAFT ANGLE CASTING DRAFT ANGLE DETAIL SIDE OF CASTING MOLD ACTUAL MOLD & CASTING
14 DRAFT ANGLE BUILDING SIDE LARGE GAP. INADEQUATE GLUING SURFACE. BUILDING FRONT
15 DRAFT ANGLE BUILDING SIDE SAND SQUARE BEFORE GLUING BUILDING FRONT
16 WOOD KITS
17 WOOD KITS
18 WOOD KITS
19 WOOD KITS
20 WOOD KITS TWO BASIC TYPES OF WOOD KITS HAND CUT EARLY WOOD KITS HAD TO BE HAND CUT NOT MUCH DIFFERENT THAN SCRATCH BUILDING SOME HAD CUT LINES DRAWN ON WOOD. OTHERS CAME WITH CLEAR ACETATE TEMPLATES QUALITY CRAFT GLOOR CRAFT JL INNOVATIVE (EARLY) N SCALE ARCHITECT (EARLY)
21 WOOD KITS TWO BASIC TYPES OF WOOD KITS LASER KITS LASER, OPERATED BY A CAD PROGRAM, PRECUTS ALL WOOD PARTS BAR MILLS NORMALLY EXCELLENT FIT NORTHEASTERN SCALE MODELS AMERICAN MODEL BUILDERS (LASER ART) CREATIVE DESIGNS BRANCHLINE KITS GC LASER BLAIR LINE JL INNOVATIVE N-SCALE ARCHITECT
22 WOOD KITS PAINTING TO PREVENT WOOD FROM WARPING USE PLAIN SPRAY PAINT PRIME BOTH SIDES WITH SEVERAL LIGHT COATS BEFORE ASSEMBLY USE AN AUTOMOTIVE GRAY PRIMER IF SPRAY PAINTING CANNOT BE DONE, USE SEVERAL LIGHT COATS OF WATER BASED ACRYLIC PAINT DRY BRUSH EACH COAT. USE INTERNAL BRACING
23 WOOD KITS INTERNAL BRACING 1/8 BASS WOOD WORKS WELL FOR BRACING. USE CAUTION WHEN ADDING BRACING AS IT MAY INTERFERE WITH A WINDOW OR DOOR ON AN ADJACENT WALL. CHECK ON ALIGNMENT IF TABS ARE USED
24 INTERNAL BRACING
25 WOOD KITS PAINTING (CON T) AFTER PRIMING, BUILDING CAN BE PAINTED USING ANY TYPE OF PAINT CAN BE PAINTED BEFORE ASSEMBLY APPLY LIGHT COATS OVER THE GREY PRIMER TO GET AN AGED LOOK. USE SMALL AMOUNTS OF PAINT IF BRUSHING WITH WATER BASED PAINT
26 WOOD KITS GLUING USE WOOD GLUE EITHER WHITE OR YELLOW WILL WORK YELLOW SETS FASTER AND HOLDS BETTER SUPER GLUE WALTHERS GOO
27 WOOD KITS TRIM ASSEMBLY
28 WOOD KITS WINDOW/DOOR ASSEMBLY
29 WOOD KITS ROOFING MATERIALS PAPER SHINGLES FROM PAPER CREEK. NO LONGER IN BUSINESS. MAY BE ABLE TO STILL FIND.
30 WOOD KITS ROOFING MATERIALS BLACK PAPER STRIPS TO REPRESENT ROLLED TAR PAPER. USUALLY COMES WITH MOST KITS
31 PLASTER KITS
32 PLASTER KITS
33 PLASTER KITS
34 PLASTER KITS TWO MANUFATURERS DOWNTOWN DECO MAKES NICE LOOKING ACROSS THE TRACKS KITS MONROE MODELS VARIOUS KITS INCLUDING HIGHWAY OVERPASSES
35 PLASTER KITS GLUING PLASTER KITS YELLOW GLUE EPOXY PLASTER KITS HAVE DRAFT ANGLE SIMILAR TO DPM KITS WALLS NEED TO BE SQUARED OFF BEFORE GLUING USE SMALL DIAMETER TUBING TO REPRESENT DOWN SPOUTS AT WALL JOINTS
36 PLASTER KITS PAINTING PLASTER KITS PRIME FIRST PLASTER WILL ABSORB PAINT IF NOT PRIMED NO WINDOW OPENINGS PLASTER WALLS TOO THICK PAINT WINDOW OPENINGS BLACK BEFORE INSERTING WINDOW FRAMES
37 METAL KITS MICRO-STRUCTURES by MILLER ENGINEERING MICRON-ART DIFFICULT TO GET RAISED TEXTURE ON ETCHED METAL COMPONENTS ACC (SUPER GLUE) IS RECOMMENDED BY MANUFACTURER RESISTANCE SOLDERING WILL ALSO WORK NEEDS TO BE PRIMED BEFORE PAINTING
38 RESIN (URETHANE) KITS EARLY MAGNUSON MODELS PERIOD MINIATURES
39 RESIN (URETHANE) KITS
40 RESIN (URETHANE) KITS NOT MADE ANYMORE AVAILABLE ON AFTERMARKET RESIN KITS SIMILAR TO DPM ALL ITEMS ARE CAST ON DRAFT ANGLE ISSUE TENDED TO WARP CAN BE HEATED ON OVEN (125 F) AND THEN FLATTENED CASTINGS TENDED TO HAVE AIR BUBBLES NEEDED TO BE FILLED, SANDED SUPER GLUE OR EPOXY WORK MUST BE WASHED AND THEN PRIMED FOR PAINTING
41 ADDING DETAILS ROOF DETAILS MOST ROOFS ARE VISIBLE ON LAYOUTS AFTER-MARKET ITEMS AVAILABLE VENTS, CHIMNEYS, PIPES, A/C UNITS, DUCTS MOST LARGE BUILDINGS HAVE WATER TANK ON TOP TAR LINES ADD TAR LINES AT WALL/ROOF JOINTS, WHERE TWO DIFFERENT ANGLED ROOFS COME TOGETHER OR WHERE ROOF DETAILS ARE ATTACHED MIX POLLY S STEAM POWER BLACK AND WHITE GLUE TO MAKE TAR. DO NOT USE YELLOW GLUE!!!!!!!!!!!!!!!!!! APPLY WITH A TOOTHPICK TV ANTENNAS FROM GOLD MEDAL MODELS
42 BUILDING DETAILS FIRE ESCAPES ADDING DETAILS ADD FIRE ESCAPES MADE BY GOLD MEDAL MODELS TO ANY URBAN SETTING BUILDING
43 ADDING DETAILS BUILDING DETAILS CLUTTER ADD PALLETS, BOXES, FUEL TANKS, BARRELS, FORK LIFTS AND PEOPLE TO INDUSTRIAL AREAS. IN URBAN AREAS ADD SHOPPING CARTS TO STORE FRONTS PARKING METERS CURBSIDE TRASH CANS SIGNS WINDOWS ADD WINDOW TREATMENTS TO WINDOWS CURTAINS, BLINDS, SHADES FILL IN STORE FRONT WINDOWS WITH CURTAINS OR PHOTOS SCALED DOWN BUILDING SIDES ADD SIGNS OR BILLBOARDS ADD SMALL DIAMETER TUBING TO REPRESENT DOWNSPOUTS APPLY A WASH OF INDIA INK AND ALCOHOL TO AGE THE MODEL WORKS ESPECIALLY WELL ON WOOD KITS
44 QUESTIONS BUILDING KITS
Drawings of all parts have been included for ease of part identification.
Acme Corporation Instructions for Assembly of the HO Scale Acme Corporation HO Kit Contents: 156 ea. white 1/16" laser cut acrylic part 10 ea. white 1/8" laser cut acrylic part 37 ea. adhesive-backed brick
More informationThe Rubley Building Instructions for Assembly of the N scale kit. v1.1
The Rubley Building Instructions for Assembly of the N scale kit. v1.1 Kit Contents: 197 ea. laser cut 1/16" acrylic parts. 1ea. adhesive backed.020 styrene part. 10 ea..060 x 1" styrene alignment pins.
More informationThe Park Hotel Instructions for Assembly of N Scale Kit
The Park Hotel Instructions for Assembly of N Scale Kit Kit Contents: 198 ea. Laser Cut Acrylic Parts, 2 ea. Chimney Parts Sheets, 1 ea.2".040 styrene rod, 5 ea. Sidewalk Parts, 14 ea. Cast Resin Dormers,
More informationThe Park Hotel Instructions for Assembly
The Park Hotel Instructions for Assembly Kit Contents: 280 ea. Laser Cut Acrylic Parts. 1 ea. 6" Plastic Coated Wire. 5 ea. Sidewalk Parts. 14 ea. Cast Resin Dormers. 12 ea. Window Glass Templates, 12
More informationContinued on next page
Please read these instructions completely through to be sure you are familiar with all the steps. Then following along again as you build your structure. Download a.zip file of all the pictures including
More informationHardee s Restaurant kit in HO scale
Hardee s Restaurant kit in HO scale Parking lot base and cars not included This kit includes all building parts milled in white styrene plastic and laser cut white acrylic, clear acrylic window glazing,
More informationThe Fyfe Building Instructions for Assembly of the N scale kit.
The Fyfe Building Instructions for Assembly of the N scale kit. Kit Contents: 150 each laser cut 1/16" acrylic parts. 6 each 020 adhesive backed part 6 each column caps 2 each decorative canopy 1 each.125"
More informationThe Saint Paul Building
The Saint Paul Building Instructions for Assembly of The Saint Paul Building. Kit Contents: 65 each laser cut acrylic parts. 1 each sheet of AC roof unit parts. 1 each sidewalk. 3 each Window Glass Templates,
More informationDonaldson s Department Store
Donaldson s Department Store Instructions for Assembly of Donaldson s Department Store Kit Contents: 80 each laser cut acrylic parts. 1 each sheet of canopy parts. 1 each sheet of AC roof unit parts. 1
More informationInstructions for Assembly of the HO Scale The Charles
The Charles Instructions for Assembly of the HO Scale The Charles HO Kit Contents: 337 ea. white 1/16" laser cut acrylic part 19 ea. Clear 1/16" laser cut acrylic part 69 ea. white 1/8" laser cut acrylic
More informationHotel Belvedere Instructions for Assembly of the HO scale kit. v1.1
Hotel Belvedere Instructions for Assembly of the HO scale kit. v1.1 Kit Contents: 319 ea. laser cut.090" acrylic parts. 132 ea. laser cut.060" acrylic parts. 8 ea. window glass templates 8 ea. window glazing
More informationNanton Grain Mill Assembly
( 1 ) Nanton Grain Mill Assembly Locate package for assembling storage building. These are cut from 1/8 masonite. Inspect and lightly sand edges where it will be bonded. Use white glue or CA glue to bond.
More informationThe Midtown Apartment Building
The Midtown Apartment Building Instructions for Assembly of The Midtown Apartment Building. Kit Contents: 70 each laser cut acrylic parts. 3 each sidewalk parts. 3each Window Glass Templates, 3 each Window
More informationModel the hub of your layout s rural setting. Planters Feed and Seed Supply Instructions N Scale 1:160 WOODLAND SCENICS
PF5201 Planters Feed and Seed Supply Instructions N Scale 1:10 Model the hub of your layout s rural setting. Planters Feed and Seed Supply presents a vintage agricultural center where farmers and rural
More informationFidelity & Guaranty Building
Fidelity & Guaranty Building N Scale Model Kit Instructions for Assembly of the Fidelity & Guaranty Building Kit Contents: 69 each laser cut acrylic parts. Sidewalk material 1 each Window Glass Templates
More informationThe Severn Instructions for Assembly of the N scale kit.
The Severn Instructions for Assembly of the N scale kit. Kit ontents: 172 each laser cut 1/16" acrylic parts 102 each adhesive backed styrene parts 1 each cast entryway 3 each cast balcony 4 each cast
More informationHARRISON S HARDWARE PF5891
1:48 BUILDING KIT HARRISON S HARDWARE PF5891 Model the local hardware store where layout residents can find all they need to keep their homes in tip-top shape and workshops running smooth. The positive
More informationDAVENPORT DEPARTMENT STORE PF5214
1:160 BUILDING KIT DAVENPORT DEPARTMENT STORE PF5214 Dress up your downtown scene with the classic Victorian architecture and large first-floor picture windows of the Davenport Department Store. Details
More informationJ.W. cobbler 1:160 BUILDING KIT PF5210 WOODLAND SCENICS
1:160 BUILDING KIT J.W. cobbler PF5210 The partially assembled walls, positive alignment system and prefinished edges make kit assembly quick, easy and accurate. This three-story brownstone features stacked
More informationThank you for purchasing E.L. Moore Window & Door.
Thank you for purchasing E.L. Moore Window & Door. Instructions Version 4.28.15 I ve named this kit after one of the greatest modelers I ve ever known, the late Elliot Moore Jr. Rest in peace my friend.
More informationRailroad Kits PO Box 461 Holden, MA
(Formerly Downtown Deco DD 1004 Fallburg Station) HO Scale. Thanks for purchasing one of my kits. Because different people have different degrees of experience, I'll walk you through, step by step, explaining
More informationCopyright Gary Faulkner March Attack All rights reserved.
Painting and Decorating Sometime passed I posted some painted 28mm Sarissa WWE buildings on to the March Attack Face Book page and had a few show and tell us emails, so here goes. If you meet me at the
More informationBuilding the 1, 2, or 3 Car
Building the 1, 2, or 3 Car Garage kit by Railroad Kits. Thanks to Bob Butts for doing the building construction and writing / taking pictures. If this is your first craftsman kit or Railroad Kits purchase
More informationIf by chance a part is missing or broken please contact us indicating the kit name and part description and we will send you a replacement.
Six Stall Roundhouse Instructions for Assembly of the HO Scale Six Stall Roundhouse Roundhouse Kit Contents: 18ea. Roof Pieces 12 ea. 1/16" Parts Sheets 9ea. 1/8" Parts Sheets 12ea. Floor Pieces 1ea. 1/4"
More informationG. Building the Cab, Cab Roof and Cab Boiler Extension Page 14 and Backhead.
G. Building the Cab, Cab Roof and Cab Boiler Extension Page 14 and Backhead. Cab. In order to ensure that the cab and tender would actually look right, as what often appears on a drawing is not always
More informationCORNER PORCH HOUSE PF5196
1:87 BUILDING KIT CORNER PORCH HOUSE PF5196 Two-story home with cedar-shake roof and a corner wrap-around porch. Clapboard siding, paned windows, and loaded with accessories, such as a bicycle built for
More informationScratchbuilding with 3D Building Materials Cut Lintels, Install Corners
The most realistic brick on the market today, these 3D engraved sheets are from actual photos of brick walls. We engrave every detail into basswood with a laser. Why put brick on wood? For modelers who
More informationTools and Tips: ( 1 )
Tools and Tips: As you build instructions will show in my many picture manual how to assemble. You can use your own methods as you desire, my results are very good. A smooth, flat work surface is very
More informationBUZZ S SAWMILL PF5195 WOODLAND SCENICS BUILDING KIT
1:87 BUILDING KIT BUZZ S SAWMILL PF5195 Buzz s Sawmill is a detailed work of art with all workings of a vintage steam-fired, belt-driven sawmill. Details include interior rafters and shake roof, attached
More informationBuilding the Bell Tower
Building the Bell Tower Mold #55 does not contain all of the blocks to build this tower. You will need extra regular blocks (1/2" x 1/2" x 1") and square blocks (1/2" x 1/2" x 1/2"). These blocks can be
More informationFidelity & Guaranty Building
Fidelity & Guaranty Building Instructions for Assembly of the Fidelity & Guaranty Building Kit Contents: 69 each laser cut acrylic parts. 1 each sheet of AC roof unit parts. 1 each sidewalk base. 4 each
More informationTaco Bell Restaurant kit in HO scale
Taco Bell Restaurant kit in HO scale Parking lot base and cars not included This kit includes all building parts milled in white styrene plastic, clear window glazing, Plastruct tile roofing, and logo
More informationModel Grandma and Grandpa s cozy cottage, a. Country Cottage Instructions HO Scale 1:87 WOODLAND SCENICS PF5186
PF586 Country Cottage Instructions HO Scale :87 Model Grandma and Grandpa s cozy cottage, a young family s first home or give this vintage Victorian cottage the run-down look of an abandoned shack. This
More informationSubway building kit in HO scale
Subway building kit in HO scale This kit includes all building parts and signs milled in white and black styrene plastic, clear window glazing, and self-adhesive decals. All parts fit together but may
More informationCVS Pharmacy kit in HO scale
CVS Pharmacy kit in HO scale Parking lot base and cars not included This kit includes all building parts and wall-mounted signs milled in white styrene plastic, clear window glazing and pre-cut Plastruct
More informationTools and Tips: ( 1 )
Tools and Tips: As you build instructions will show in my many picture manual how to assemble. You can use your own methods as you desire, my results are very good. A smooth, flat work surface is very
More informationLowe's backdrop building kit in HO scale
Lowe's backdrop building kit in HO scale Parking lot base, lawn mowers and cars not included This kit includes all building parts and signs milled in white styrene plastic and clear window glazing. Plastruct
More informationBlakes 7 DSV-1 Liberator
Blakes 7 DSV-1 Liberator Model kit by Masterpiece Models: www.masterpiecemodels.com Pattern Maker: Alfred Wong Casting: J&S Technologies LLC Parts List Main body 3 Main body nose vanes 4 Main body detail
More informationGENERAL INSTRUCTIONS. Woodland Scenics PO BOX 98, LINN CREEK, MO woodlandscenics.com PREPARE PLASTIC PARTS PREPARE METAL CASTINGS
#40700 Popa Weelie's Saloon INSTRUCTIONS CAUTION: Cutting tools recommended. Use with care. This item is not a Children s Product and is not intended for use by Children. Conforms to Health Requirements
More informationBuilding the Circular Tower
Building the Circular Tower You will need to fill this mold 18 times to have enough blocks to build the circular tower. Be sure the blocks are completely dry before gluing them together. For detailed instructions
More informationTools: Every craftsman kit builder should have the basic tools you need to construct this kit. They are:
Thank you for purchasing the Railroad Kits EF20 Car & Loco Repair Shed. This kit is the second one that I ve had the pleasure of working with Ed Fulasz on. Ed painstakingly hand carved the Hydrocal master
More informationThe Gothic Chess Set
The Gothic Chess Set Please note that this chess set is a fairly difficult and time consuming project. I strongly suggest building one or two easier models before tackling this one! The miniatures used
More informationHRMLaserModels.com T.W. SNOW 25 TON COALING TOWER S SCALE AS USED ON THE MILWAUKEE ROAD
HRMLaserModels.com T.W. SNOW 25 TON COALING TOWER S SCALE AS USED ON THE MILWAUKEE ROAD HRM-61 S SCALE COAL TOWER T.W.Snow 25 Ton Coaling Tower General Instructions Check out HRMLaserModels.com for construction
More informationPeter Krause ABN
Peter Krause ABN 25 736 637 163 T/as O-Aust Kits PO Box 743 ALBANY CREEK QLD 4035 AUSTRALIA Phone +61 (0)7 3298 6283 (7.00pm to 9.30pm ONLY) Facsimile +61 (0)7 3298 6287 (24 hours) Mobile 0419 680 584
More informationCONCEPT MODELS SP DOUBLE STACK CONTAINER CARS INSTRUCTIONS Sheep Ranch Rd. Mountain Ranch, CA Web Address:
CONCEPT MODELS Web Address: http://www.con-sys.com 8331 Sheep Ranch Rd. Mountain Ranch, CA 95246 SP DOUBLE STACK CONTAINER CARS INSTRUCTIONS 2 CONCEPT MODELS PARTS Item No. PART NO. DESCRIPTION QTY. 1
More informationSCHWERE PLATTFORMWAGON TYPE SSY 60TON
TWS 5094 SCHWERE PLATTFORMWAGON TYPE SSY 60TON Congratulations on purchasing one of the finer aftermarket resin kits sets available. The photo below is of the completed kit. The Panther tank is not included
More informationThe Reading Tug Schuylkill By: Barry Hensel
The Reading Tug Schuylkill By: Barry Hensel My Reading Lines Central Division layout has needed a tug boat for the Port Richmond coal dock scene for some time. I finally found a Walthers Tug kit for a
More informationBuilding the Gothic Church
Building the Gothic Church Mold #54 does not contain all of the blocks to build this church. You will need extra regular blocks (1/2" x 1/2" x 1") and square blocks (1/2" x 1/2" x 1/2"). These blocks can
More informationPainting Figures Marty Vaughn MMR
Painting Figures Marty Vaughn MMR There are as many ways to paint figures as there are ways to paint rolling stock or structures. There is no perfect way and no right way, it s just what ever method you
More informationCONCEPT MODELS UTLX 80006,80020 CRYOGENIC TANK CAR KIT INSTRUCTIONS Sheep Ranch Rd. Mountain Ranch, CA 95246
CONCEPT MODELS Web Address: http://www.con-sys.com Email: concept_models@con-sys.com 8331 Sheep Ranch Rd. Mountain Ranch, CA 95246 UTLX 80006,80020 CRYOGENIC TANK CAR KIT INSTRUCTIONS 2 CONCEPT MODELS
More informationLa Grange, Texas MKT Depot kit in HO scale
La Grange, Texas MKT Depot kit in HO scale This kit includes all building parts laser cut in plywood, white and clear acrylic, and laser cut self-adhesive shingles. All parts fit together but may need
More informationTools and Tips: ( 1 )
Tools and Tips: As you build the book will show in my many picture manual how to assemble. You can use your own methods as you desire, but these worked best for me. A smooth, flat work surface is very
More informationShell Gas Station & Convenience Store kit in HO scale
Shell Gas Station & Convenience Store kit in HO scale Parking lot base and cars not included This kit includes all building parts and signs milled in white and black styrene plastic, clear window glazing,
More informationCONCEPT MODELS INSTRUCTIONS FOR THE KASGRO KRL SPECIAL DEPRESSED CENTER FLAT CARS El Toro Way Stockton, CA 95210
CONCEPT MODELS Web Address: http://www.con-sys.com Email: concept_models@con-sys.com 8810 El Toro Way Stockton, CA 95210 INSTRUCTIONS FOR THE KASGRO KRL 204000-2 SPECIAL DEPRESSED CENTER FLAT CARS 2 CONCEPT
More informationScratch Build a Water Tower
Here s some Prototype details Photos Courtesy of Rodney Doster Water Spout and Discharge Pipe Tank Bands Here s some more Prototype details Photos Courtesy of Rodney Doster Weather Vane as a Finial Using
More informationLASER-ART. The DuBois House. LASER-ARTSTRUCTURES by BRANCHLINE TRAINS BRANCHLINE TRAINS STRUCTURES
LASER-ARTSTRUCTURES by BRANCHLINE TRAINS LASER-ART STRUCTURES by BRANCHLINE TRAINS The DuBois House History With their gingerbread trim and ornate decoration the Queen Anne style is what most people imagine
More informationRural Shamrock Gas Station & Store kit in HO scale
Rural Shamrock Gas Station & Store kit in HO scale Parking lot base and cars not included This kit includes all building parts and signs milled in white and black styrene plastic, clear window glazing
More informationAfter printing these plans, several pages will need to be taped together to form a larger plan. Below is a diagram of which pages need assembled.
Watermill Building Plans For complete building instructions and instructional videos, please visit the main web site at www.hirstarts.com/watermill/watermill.html. Using these plans alone will not give
More informationCONCEPT MODELS INSTRUCTIONS FOR PRODUCT 60,000 GALLON TANK CAR El Toro Way Stockton, CA 95210
CONCEPT MODELS Web Address: http://www.con-sys.com Email: concept_models@con-sys.com 8810 El Toro Way Stockton, CA 95210 INSTRUCTIONS FOR PRODUCT 60,000 GALLON TANK CAR 2 CONCEPT MODELS PARTS GATX/UTLX
More informationSwift assembly guide
Swift assembly guide Download the assembly guide at www.scihighmodels.com/swift.pdf Sample kit shown with aluminium bells (available with the Deluxe kit) Shown here without main tanks Version 10/12/2010
More informationDomino's Take-out Pizza building kit in HO scale, latest design
Domino's Take-out Pizza building kit in HO scale, latest design This kit includes all building parts and signs milled in white and black styrene plastic, clear window glazing, and self-adhesive decals.
More informationN Scale Concrete Coal Dock Instruction Manual
N Scale Concrete Coal Dock Instruction Manual 1. General Overview This kit combines precision laser cut acrylic, photo etched brass and wood parts to make a highly detailed model of the Roberts and Schaefer
More informationSTONEYBRIDGE STRUCTURES
02-208-OO North Eastern Railway N2 Style Signal Box INTRODUCTION Thank you for purchasing one of our products. We hope this information sheet will prove useful in the construction of this model. We have
More informationSTOP! READ THIS FIRST! TIPS FOR BUILDING LASER CUT MODELS
INSTRUCTIONS STOP! READ THIS FIRST! TIPS FOR BUILDING LASER CUT MODELS 1. Test fit all parts and make sure you know how everything goes together before gluing. If you are contemplating cutting a part to
More informationCobra X Q Construction Tips Construction: Bel y pan
Cobra X Q Construction Tips : The white plastic in this kit is high impact styrene. It can be painted with most types of coatings if light coats are applied this is necessary due to the thickness of the
More informationAssembly Instructions for Summit Motel Kits # SMFS and SMBD
Assembly Instructions for Summit Motel Kits # SMFS and SMBD Introduction Thank you for your purchase of the Summit Motel. This modern motel can be converted to almost any chain motel of your choice, depending
More informationAn Inner Hive Cover. In the Beekeeper s Work Shop. Building a Bee Hive: The Inner Hive Cover. by Stephen E. Tilmann
An Inner Hive Cover In the Beekeeper s Work Shop The project for this article is an inner hive cover. The inner cover sits on top of the topmost hive body (super) and underneath the telescoping top cover
More informationCONCEPT MODELS INSTRUCTIONS FOR UP DC-10 WING CAR El Toro Way Stockton, CA Web Address:
CONCEPT MODELS Web Address: http://www.con-sys.com 8810 El Toro Way Stockton, CA 95210 INSTRUCTIONS FOR UP DC-10 WING CAR 2 CONCEPT MODELS PARTS DC-10 WING CAR Item No. Part No. DESCRIPTION QTY. 1 2003-1
More informationHow to Use the Gothic Graveyard Mold #46
How to Use the Gothic Graveyard Mold #46 The pieces you see here are cast in plastic resin. You cannot use plaster to cast the fence and gate sections, because they would be too fragile and would break
More informationRosalina Accessories Tutorial Version March 2011 Martyn
Rosalina Accessories Tutorial Version 1.0 - March 2011 Martyn Star Brooch Feel free to experiment with these dimensions, you should make a template you are happy with, the method still works. 1) Creating
More informationEngine Shed Overview
Introduction March 2019 About At ScaleCast we want to provide the best real stone products that go far beyond levels of detail, but also provide an easy and effective product set that help you achieve
More informationModern Gas Station backdrop building kit in HO scale
Modern Gas Station backdrop building kit in HO scale This kit includes all building parts, pumps, signs, and base milled in white styrene plastic, clear window glazing, Plastruct Ridgid Clay Tile roofing,
More informationThe quick and simple way to create chimney breasts and install inset stoves
50 MM instructions. Please see Page 5 for 25 MM instructions. Thermalux The quick and simple way to create chimney breasts and install inset stoves Easy to work: Thermalux is worked just like wood and
More informationThe Lansdowne One Car Garage Assembly Instruction by Laser Dollhouse Designs
The Lansdowne One Car Garage Assembly Instruction by Laser Dollhouse Designs NOTE 1: Please do a dry assembly using only tape to hold house together. This will get you familiar with parts, location, and
More informationAdditional Parts List:
THE TIME MACHINE Additional Parts List: In addition to the cast resin parts enclosed in this kit, there should also be a plastic bag containing the following items needed to complete your time machine
More informationHow to Use the Wooden Plank Mold
How to Use the Wooden Plank Mold Even though I'm giving instructions for only two projects, there are tons of uses for this mold. Some of these include: Floors Steps Doors Tables Benches Crates Drawbridge
More informationLAPORTE COUNTY 4-H MODEL PROJECT
LAPORTE COUNTY 4-H MODEL PROJECT I. PURPOSE This project is designed to provide members with an opportunity to be creative and to familiarize them with the techniques of assembly, construction and painting.
More informationWoodchip Loader All Scales
Woodchip Loader All Scales Before Starting PREPARING BRASS The easiest way to remove the brass parts from the sheet they are produced on, is to use rail nippers. The brass is soft and won't affect their
More informationTips & Tricks using Part 17
Tips & Tricks using Part 17 Making a Secret Door Using Mold #96...1 Using Cotton Swabs For Antiquing...4 Planning Dungeon Waterways...5 Pouring and Texturing Water...6 Making Water for Fountains...11 Tips
More informationBUILDING ST. MARTIN S CORNER GAS & GROCERIES By RAILROAD KITS
Thank you for purchasing this kit. I need to first thank Bob Butts for building the pilot model, and most of all for this wonderful set of instructions. 32 pages. Over 110 super color photos documenting
More informationDiscount Auto Parts store kit in HO scale
Discount Auto Parts store kit in HO scale Parking lot base and cars not included This kit includes all building parts and signs milled in white styrene plastic, white and clear acrylic, injection molded
More informationBackground: For the Modeler:
Right On Replicas, LLC Step-by-Step Review 20141020* Space Shuttle with Fuel Tank and Boosters 1:72 Scale Monogram Model Kit #85-5089 Review (Part 1 of 2) Background: The United States Space Transportation
More informationThe Hamlin Assembly Instruction By Laser Dollhouse Designs
The Hamlin Assembly Instruction By Laser Dollhouse Designs NOTE 1: Please do a dry assembly using only tape to hold house together. This will get you familiar with parts, location, and fit. This also gives
More information50 FineScale Modeler January Finding (Captain) Nemo
50 FineScale Modeler January 2005 Finding (Captain) Nemo 1/70 Scale Sci-Fi How-to In 1954, Walt Disney Pictures launched its big-screen adaptation of Jules Verne s classic adventure novel, 20,000 Leagues
More informationKristiana Tudor Assembly Instructions By Laser Dollhouse Designs
Kristiana Tudor Assembly Instructions By Laser Dollhouse Designs Parts for assembly Second floor base Third floor base First floor base First floor walls and porch rails Second floor walls Third floor
More informationO-Aust Kits. QR Class CLF Louvred Wagon Kitset in O Scale 1:48
O-Aust Kits PO Box 743 ALBANY CREEK QLD 4035 AUSTRALIA Phone +61 (0)7 3298 6283 (7.00pm to 9.30pm ONLY) Facsimile +61 (0)7 3298 6287 (24 hours) Mobile 0419 680 584 Email pa_rl_krause@bigpond.com Web www.oaustkits.com.au
More informationConstructing a Cycle Shop
Constructing a Cycle Shop Materials needed 4 sq ft 3/8 outdoor plywood 2 sq ft. 1/2 outdoor plywood 2 sheets of Precision Sheet plastic ( cement block pattern) Clear window glass: 2 sq ft. to allow for
More informationCorona Concepts presents The Laurel All Wood Dollhouse. Instructions and Assembly Guides
Corona Concepts presents The Laurel All Wood Dollhouse Instructions and Assembly Guides Introduction In Short... Welcome to the exciting world of dollhouses and miniatures. Since the first tab and slot
More informationTrack Bumpers Wood or Plastic Your Choice
Track Bumpers Wood or Plastic Your Choice An assembly method is presented to build track bumpers for non-ballasted track such as Atlas O 2st Century, Ross Custom, Gargraves etc. Whether you decide to build
More information3Insert the second rod no. 4
Yamato: Step-by-step 37 The stern block and searchlight control towers a b c d e f Recommended tools and materials Wood glue Sandpaper (no. 800 grain) Metal file Putty Craft knife For metal: Super Glue
More informationNSWGR Class SRC Refrigerated Wagon Kitset in 7mm Scale
O-Aust Kits PO Box 743 ALBANY CREEK QLD 4035 AUSTRALIA Phone +61 (0)7 3298 6283 (7.00pm to 9.30pm ONLY) Facsimile +61 (0)7 3298 6287 (24 hours) Mobile 0419 680 584 Email pa_rl_krause@bigpond.com Web www.oaustkits.com.au
More informationPS 5077 cu. ft. Boxcar with EOC device. 1:29 scale resin craftsman kit. by Burl Rice
PS 5077 cu. ft. Boxcar with EOC device 1:29 scale resin craftsman kit by Burl Rice www.burlrice.com Bill of materials (not included): Thick/medium viscosity CA PL adhesive, or Gorilla Glue Heavy Duty Construction
More informationVivian Mansion Assembly Instruction By Laser Dollhouse Designs
Vivian Mansion Assembly Instruction By Laser Dollhouse Designs NOTE 1: Please do a dry assembly using only tape to hold house together. This will get you familiar with parts, location, and fit. This also
More informationDarjeeling Coach 4-Wheel First/Second Class
Darjeeling Coach 4-Wheel First/Second Class Introduction This kit was designed in 16mm scale from early Darjeeling drawings and photographs. It uses brass castings available from Brandbright. The instructions
More information3Position the hull of the ship as
Yamato: Step-by-step 25 The hull and stern deck c b d a b d c e e f a Rear frame b Stern deck x 2 c Stern deck x 2 d Side wall x 2 Wood glue Sandpaper (no. 400 grain) Craft knife Pliers d Side wall x 2
More informationSURFACE CASTING METHOD: For Molds & Core Boxes. Presented by: Hapco Inc.
SURFACE CASTING METHOD: For Molds & Core Boxes Presented by: Hapco Inc. RAPIDFIL Detailed Specifications STEP 1 SPACER LAYER Apply a layer of ¼ foam to create a uniform ¼ thickness around the pattern.
More informationSouthern Pacific C-30-4/6 Bay Window Caboose N-Scale & HO-Scale
Southern Pacific C-30-4/6 Bay Window Caboose N-Scale & HO-Scale Before Starting PREPARING BRASS The easiest way to remove the brass parts from the sheet they are produced on, is to use rail nippers. The
More informationCaptain Baxter, 3D Print instructions
Captain Baxter, 3D Print instructions Baxter prototype printed by Shapeways and a home 3D printer Thank you for purchasing the Captain Baxter 3D print, this will instruct you on how to put this model together,
More informationBen Franklin 5&10 Store
Ben Franklin 5&10 Store RIVER LEAF MODELS, LLC RIVER LEAF MODELS, LLC Thank you for purchasing the Ben Franklin 5&10 structure kit. Your kit includes everything you need to assemble the final product.
More information7/8n2 Scale Plantation Coach
7/8n2 Scale Plantation Coach Introduction This small coach modeled in 7/8 n2 was inspired from a Hawaiian Railway Company plantation excursion car from the late 19 century. While not an exact replica,
More information