La Grange, Texas MKT Depot kit in HO scale
|
|
|
- Antony Davidson
- 6 years ago
- Views:
Transcription
1 La Grange, Texas MKT Depot kit in HO scale This kit includes all building parts laser cut in plywood, white and clear acrylic, and laser cut self-adhesive shingles. All parts fit together but may need light sanding in joints for cosmetic reasons. The model needs painting. Some model building and painting skills are required. Manufactured by Custom Cuts by Summit USA LLC, 512A Ford Street, Lake Charles, LA
2 Assembly instructions for MKT Depot Thank you for buying this MKT Depot kit. Please take some time to read these instructions before you begin assembling. This kit is laser cut in micro plywood and white and clear acrylic. The wall parts are 1/16 wood and are tabbed and slotted for easier assembly. Some of the 1/32 wood is self-adhesive as well as all the 1/64 wood. The window glazing is clear acrylic. Take your time to identify all parts, lay them out and clean them for any burrs before gluing them together. When gluing it together, I recommend you use CA glue to hold the parts together fast. When the CA glue has set, glue all joints with a small bead of wood glue to make the joint strong. You can apply the glue with a micro-brush or a regular small paint brush. Wall parts overview
3 Roof parts and roof support sheet Windows, doors, window trim, corner trim and lower wall trim
4 Base and window glass Assembly Start by gluing the front wall and middle wall to the EDGE of the smallest base. Then glue on the corner and the end wall. You may want to use a jig and clamps to hold the parts until the glue sets.
5 The larger base is for use as the concrete foundation. Glue on the 2 short walls for the bay window and the rear freight section wall. and the inside roof support wall. Continue with the next corner and the rear wall. Please note that the diagonal end walls has diagonal boards at the top. Glue on the last corner and the other end wall. Glue the bay window in place
6 Sand the tabs on the diagonal walls flush with the walls. Glue in the door supports for the freight doors. Glue the small wall pieces to the roof as shown. Painting & finishing Paint all the walls (from the bottom of the windows and up) MKT yellow.
7 Paint the underside of the roof yellow as shown. Remove the two freight door panels from the windows, doors and trim sheet and paint them yellow, paint the rest of the sheet green. Paint the bottom wall trim sheet and the other trim strips green. Paint the roof supports sheet green on both sides. Lay out the bottom wall trim so you know which piece goes where. Remember to leave room for the door trim. It can be somewhat of a puzzle, but all the parts fit. Start from the left front.
8 Mount the door trim in the process. Mount the short wall trim to the short wall on the rear of the building as shown. Then mount the long wall trim. It is longer than the wall so it covers the trim on the end wall. Mount the door trim and the wall trim between them, continue finishing the corner.
9 Mount the trim on the bay window and the remaining trim on the front and end walls. The small sheet with 1/32 self-adhesive (0.060 wide) strips go on top of the wall trim as shown. Once the top strip is in place, mount the window trim on top of the strip. Continue as shown The strips for the bay window and the diagonal corners may need trimming.
10 On the windows, doors and trim sheet you will find the self-adhesive wide strips which go onto the wall trim just below the grooves. Look closely at the picture. Mount them all the way around. They also may need trimming by the bay window and the diagonal walls, all other strips fit to length. Mount the corner trim boards. Mount them so they cover the gaps in the diagonal corners.
11 Continue around the building as shown. Finish with the tall corners and mount the decorative pieces on the top of the end walls. HANDLE VERY CAREFULLY, they will break if you look at them crooked. Lay out the window glass as shown so you know where each piece goes. Remove the protective paper and glue them inside the wall with a few drops of CA glue. Mount the self-adhesive door sections on the glass.
12 Mount the panel trim on the doors and finally mount the wide strips on top of the panel trim. Mount the window frames on the glass. Handle the window frames with care and take great care to position them correctly, once the glue touches they can t be removed without damage. Mount the roof brackets in the holes in the wall, securing them with a drop of glue inside the wall.
13 Mount the two small corner trim pieces on the dormer Glue the roof pieces in place. Before you handle the decal sheet, you should spray a coat of Krylon Clear Acrylic or Testors Dull Cote on it to protect the print. When the paint is dry, cut out the logos and posters using a steel ruler and a sharp hobby knife. Mount the name sign decal on the sign piece, and cut out the MKT shield and mount it on the wall.
14 Cut a strip out of the shingle sheet and attach it to the roof, aligning with the lines. Attach the next level 180º shifted to form a diamond as shown. Yes, it takes forever to finish the roof, but the result is worth the time. Before mounting the roof peak flashing strip, pre-fold it down the middle, using a steel ruler. This will help to avoid the flashing come unglued. Paint the roof flat light gray, then touch up the green on the edges.
15 Cut the chimney parts out of the sprue and glue them together as shown Sand the bottom of the chimneys smooth, using a piece of sand paper flat on the table. Paint the chimneys maroon or dark red and fill the mortar lines with Roberts Brick Mortar Formula, following the directions on the bottle. Glue the chimneys to the roof with Woodland Scenics Scenic Glue. It dries up clear and flat. Also using Scenic Glue, mount the roof brackets on the end wall corners as shown on the following pictures.
16 Cut out the roof edge trim boards and stick them on. You need to trim the length once they are mounted. Glue the decorative pieces inside the roof peak with Scenic Glue. Colors used on this model: Accuflex MKT Yellow. For the green I found the Accuflex MKT Green a little too bright/lime toned to match the prototype. I found Floquil Southern Green to be a good match. Unfortunately the Floquil paints have been discontinued, so you will have to find another match. For the chimneys I used Humbrol Maroon 73.
17 Enjoy your MKT Depot on your layout. Here are some other products you may enjoy in a future project: #SMFS Summit Motel, full version #DP-001 Domino's Pizza take-out #CS-001 Dave's Coffee Shop #TB-001 Taco Bell Restaurant #TB-003 New Taco Bell Restaurant #KFC-001 KFC Restaurant #EX-001 Exxon Gas Station & Store #SW-001 Subway Restaurant #WH-001 Waffle House Restaurant
18 #SC-001 Rural Shamrock Gas Station #SH-001 Shell Gas Station & Store #DG-001 Dollar General Store #LO-001 #CVS-001 CVS Pharmacy #FS-001 Modern City Fire Station #ML-001 Strip Mall backdrop #1 #ML-002 Strip Mall backdrop #2 Lowe's backdrop building #JL-001 Jiffy Lube Mall complex #ML-003 Office Depot backdrop #ML-005 Pier 1 Imports backdrop #CH-001 Polk County Court House #BK-001 First State Bank #ML-006 Dollar Tree backdrop #GS-001 Gas Station backdrop
19 #HD-001 Harcdee s Restaurant #CJ-001 Carl s Jr. Restaurant #AM-001 Small Amtrak Station #DA-001 Discount Auto Parts #PH-001 Pizza Hut Restaurant Keep updated for new products on our website:
Domino's Take-out Pizza building kit in HO scale, latest design
Domino's Take-out Pizza building kit in HO scale, latest design This kit includes all building parts and signs milled in white and black styrene plastic, clear window glazing, and self-adhesive decals.
Discount Auto Parts store kit in HO scale
Discount Auto Parts store kit in HO scale Parking lot base and cars not included This kit includes all building parts and signs milled in white styrene plastic, white and clear acrylic, injection molded
Rural Shamrock Gas Station & Store kit in HO scale
Rural Shamrock Gas Station & Store kit in HO scale Parking lot base and cars not included This kit includes all building parts and signs milled in white and black styrene plastic, clear window glazing
Hardee s Restaurant kit in HO scale
Hardee s Restaurant kit in HO scale Parking lot base and cars not included This kit includes all building parts milled in white styrene plastic and laser cut white acrylic, clear acrylic window glazing,
Shell Gas Station & Convenience Store kit in HO scale
Shell Gas Station & Convenience Store kit in HO scale Parking lot base and cars not included This kit includes all building parts and signs milled in white and black styrene plastic, clear window glazing,
Subway building kit in HO scale
Subway building kit in HO scale This kit includes all building parts and signs milled in white and black styrene plastic, clear window glazing, and self-adhesive decals. All parts fit together but may
Pier 1 Imports backdrop building kit in HO scale
Pier 1 Imports backdrop building kit in HO scale Parking lot base and cars not included This kit includes all building parts and signs milled in white and black styrene plastic, clear window glazing, logos
Strip Mall #2 backdrop building kit in HO scale
Strip Mall #2 backdrop building kit in HO scale Parking lot base and cars not included This kit includes all building parts and signs milled in white and black styrene plastic, clear window glazing, logos
Taco Bell Restaurant kit in HO scale
Taco Bell Restaurant kit in HO scale Parking lot base and cars not included This kit includes all building parts milled in white styrene plastic, clear window glazing, Plastruct tile roofing, and logo
CVS Pharmacy kit in HO scale
CVS Pharmacy kit in HO scale Parking lot base and cars not included This kit includes all building parts and wall-mounted signs milled in white styrene plastic, clear window glazing and pre-cut Plastruct
Modern Gas Station backdrop building kit in HO scale
Modern Gas Station backdrop building kit in HO scale This kit includes all building parts, pumps, signs, and base milled in white styrene plastic, clear window glazing, Plastruct Ridgid Clay Tile roofing,
Lowe's backdrop building kit in HO scale
Lowe's backdrop building kit in HO scale Parking lot base, lawn mowers and cars not included This kit includes all building parts and signs milled in white styrene plastic and clear window glazing. Plastruct
Assembly Instructions for Summit Motel Kits # SMFS and SMBD
Assembly Instructions for Summit Motel Kits # SMFS and SMBD Introduction Thank you for your purchase of the Summit Motel. This modern motel can be converted to almost any chain motel of your choice, depending
Hotel Belvedere Instructions for Assembly of the HO scale kit. v1.1
Hotel Belvedere Instructions for Assembly of the HO scale kit. v1.1 Kit Contents: 319 ea. laser cut.090" acrylic parts. 132 ea. laser cut.060" acrylic parts. 8 ea. window glass templates 8 ea. window glazing
HARRISON S HARDWARE PF5891
1:48 BUILDING KIT HARRISON S HARDWARE PF5891 Model the local hardware store where layout residents can find all they need to keep their homes in tip-top shape and workshops running smooth. The positive
Model the hub of your layout s rural setting. Planters Feed and Seed Supply Instructions N Scale 1:160 WOODLAND SCENICS
PF5201 Planters Feed and Seed Supply Instructions N Scale 1:10 Model the hub of your layout s rural setting. Planters Feed and Seed Supply presents a vintage agricultural center where farmers and rural
The Park Hotel Instructions for Assembly of N Scale Kit
The Park Hotel Instructions for Assembly of N Scale Kit Kit Contents: 198 ea. Laser Cut Acrylic Parts, 2 ea. Chimney Parts Sheets, 1 ea.2".040 styrene rod, 5 ea. Sidewalk Parts, 14 ea. Cast Resin Dormers,
Drawings of all parts have been included for ease of part identification.
Acme Corporation Instructions for Assembly of the HO Scale Acme Corporation HO Kit Contents: 156 ea. white 1/16" laser cut acrylic part 10 ea. white 1/8" laser cut acrylic part 37 ea. adhesive-backed brick
J.W. cobbler 1:160 BUILDING KIT PF5210 WOODLAND SCENICS
1:160 BUILDING KIT J.W. cobbler PF5210 The partially assembled walls, positive alignment system and prefinished edges make kit assembly quick, easy and accurate. This three-story brownstone features stacked
The Fyfe Building Instructions for Assembly of the N scale kit.
The Fyfe Building Instructions for Assembly of the N scale kit. Kit Contents: 150 each laser cut 1/16" acrylic parts. 6 each 020 adhesive backed part 6 each column caps 2 each decorative canopy 1 each.125"
The Severn Instructions for Assembly of the N scale kit.
The Severn Instructions for Assembly of the N scale kit. Kit ontents: 172 each laser cut 1/16" acrylic parts 102 each adhesive backed styrene parts 1 each cast entryway 3 each cast balcony 4 each cast
The Saint Paul Building
The Saint Paul Building Instructions for Assembly of The Saint Paul Building. Kit Contents: 65 each laser cut acrylic parts. 1 each sheet of AC roof unit parts. 1 each sidewalk. 3 each Window Glass Templates,
The Rubley Building Instructions for Assembly of the N scale kit. v1.1
The Rubley Building Instructions for Assembly of the N scale kit. v1.1 Kit Contents: 197 ea. laser cut 1/16" acrylic parts. 1ea. adhesive backed.020 styrene part. 10 ea..060 x 1" styrene alignment pins.
Tools and Tips: ( 1 )
Tools and Tips: As you build instructions will show in my many picture manual how to assemble. You can use your own methods as you desire, my results are very good. A smooth, flat work surface is very
Fidelity & Guaranty Building
Fidelity & Guaranty Building Instructions for Assembly of the Fidelity & Guaranty Building Kit Contents: 69 each laser cut acrylic parts. 1 each sheet of AC roof unit parts. 1 each sidewalk base. 4 each
Thank you for purchasing E.L. Moore Window & Door.
Thank you for purchasing E.L. Moore Window & Door. Instructions Version 4.28.15 I ve named this kit after one of the greatest modelers I ve ever known, the late Elliot Moore Jr. Rest in peace my friend.
The Park Hotel Instructions for Assembly
The Park Hotel Instructions for Assembly Kit Contents: 280 ea. Laser Cut Acrylic Parts. 1 ea. 6" Plastic Coated Wire. 5 ea. Sidewalk Parts. 14 ea. Cast Resin Dormers. 12 ea. Window Glass Templates, 12
DAVENPORT DEPARTMENT STORE PF5214
1:160 BUILDING KIT DAVENPORT DEPARTMENT STORE PF5214 Dress up your downtown scene with the classic Victorian architecture and large first-floor picture windows of the Davenport Department Store. Details
The Midtown Apartment Building
The Midtown Apartment Building Instructions for Assembly of The Midtown Apartment Building. Kit Contents: 70 each laser cut acrylic parts. 3 each sidewalk parts. 3each Window Glass Templates, 3 each Window
Donaldson s Department Store
Donaldson s Department Store Instructions for Assembly of Donaldson s Department Store Kit Contents: 80 each laser cut acrylic parts. 1 each sheet of canopy parts. 1 each sheet of AC roof unit parts. 1
Model Grandma and Grandpa s cozy cottage, a. Country Cottage Instructions HO Scale 1:87 WOODLAND SCENICS PF5186
PF586 Country Cottage Instructions HO Scale :87 Model Grandma and Grandpa s cozy cottage, a young family s first home or give this vintage Victorian cottage the run-down look of an abandoned shack. This
Ben Franklin 5&10 Store
Ben Franklin 5&10 Store RIVER LEAF MODELS, LLC RIVER LEAF MODELS, LLC Thank you for purchasing the Ben Franklin 5&10 structure kit. Your kit includes everything you need to assemble the final product.
HRMLaserModels.com T.W. SNOW 25 TON COALING TOWER S SCALE AS USED ON THE MILWAUKEE ROAD
HRMLaserModels.com T.W. SNOW 25 TON COALING TOWER S SCALE AS USED ON THE MILWAUKEE ROAD HRM-61 S SCALE COAL TOWER T.W.Snow 25 Ton Coaling Tower General Instructions Check out HRMLaserModels.com for construction
LASER-ART. The DuBois House. LASER-ARTSTRUCTURES by BRANCHLINE TRAINS BRANCHLINE TRAINS STRUCTURES
LASER-ARTSTRUCTURES by BRANCHLINE TRAINS LASER-ART STRUCTURES by BRANCHLINE TRAINS The DuBois House History With their gingerbread trim and ornate decoration the Queen Anne style is what most people imagine
Fidelity & Guaranty Building
Fidelity & Guaranty Building N Scale Model Kit Instructions for Assembly of the Fidelity & Guaranty Building Kit Contents: 69 each laser cut acrylic parts. Sidewalk material 1 each Window Glass Templates
Nanton Grain Mill Assembly
( 1 ) Nanton Grain Mill Assembly Locate package for assembling storage building. These are cut from 1/8 masonite. Inspect and lightly sand edges where it will be bonded. Use white glue or CA glue to bond.
Tools and Tips: ( 1 )
Tools and Tips: As you build the book will show in my many picture manual how to assemble. You can use your own methods as you desire, but these worked best for me. A smooth, flat work surface is very
Tools and Tips: ( 1 )
Tools and Tips: As you build instructions will show in my many picture manual how to assemble. You can use your own methods as you desire, my results are very good. A smooth, flat work surface is very
The Lansdowne One Car Garage Assembly Instruction by Laser Dollhouse Designs
The Lansdowne One Car Garage Assembly Instruction by Laser Dollhouse Designs NOTE 1: Please do a dry assembly using only tape to hold house together. This will get you familiar with parts, location, and
Instructions for Assembly of the HO Scale The Charles
The Charles Instructions for Assembly of the HO Scale The Charles HO Kit Contents: 337 ea. white 1/16" laser cut acrylic part 19 ea. Clear 1/16" laser cut acrylic part 69 ea. white 1/8" laser cut acrylic
Continued on next page
Please read these instructions completely through to be sure you are familiar with all the steps. Then following along again as you build your structure. Download a.zip file of all the pictures including
CORNER PORCH HOUSE PF5196
1:87 BUILDING KIT CORNER PORCH HOUSE PF5196 Two-story home with cedar-shake roof and a corner wrap-around porch. Clapboard siding, paned windows, and loaded with accessories, such as a bicycle built for
Building the 1, 2, or 3 Car
Building the 1, 2, or 3 Car Garage kit by Railroad Kits. Thanks to Bob Butts for doing the building construction and writing / taking pictures. If this is your first craftsman kit or Railroad Kits purchase
EXTREME LOAD no. TWO
1602 - EXTREME LOAD no. TWO Kit Features: 22' 4 " x 14' x 3'-6 Oversize Load 49mm (1.9") actual height Bolt Head Details Welded Load Mounting Fins Painting Handles Tools Required: Hobby Knife Tweezers
Small 45 Roof Houses 1 or 2 Story 1 /24 th Scale Patterns
BA GARDEN TOWNS 45 Roof Houses 10" x 10" 1 or Story Scaled and easy to read patterns and instructions for wood houses. Yard and Garden Buildings Compatible with Garden Railroads or a delight for any child's
CONCEPT MODELS INSTRUCTIONS FOR UP DC-10 WING CAR El Toro Way Stockton, CA Web Address:
CONCEPT MODELS Web Address: http://www.con-sys.com 8810 El Toro Way Stockton, CA 95210 INSTRUCTIONS FOR UP DC-10 WING CAR 2 CONCEPT MODELS PARTS DC-10 WING CAR Item No. Part No. DESCRIPTION QTY. 1 2003-1
How to assemble the Reims Gueux Pit Centre Module #005
How to assemble the Reims Gueux Pit Centre Module #005 We recommend quick drying super glue for our models. Just a few drops on the joining edges, press and hold them for a few seconds and the connection
Cockpit Kit. Full Depth - Builds Quickly - Light Weight READ THROUGH THIS INSTRUCTION MANUAL FIRST. IT CONTAINS IM- laser cut wood kit
The Savage Light Sukhoi Su- 27 Cockpit Kit contains everything you need to build a full depth semi scale Su-27 cockpit, yet adds less than an ounce to your finished model s weight (not including pilot).
Seascape Bungalow Assembly instructions. Laser Dollhouse Designs
Seascape Bungalow Assembly instructions Laser Dollhouse Designs NOTE: Please do a dry assembly using only tape to hold house together. This will get you familiar with parts, location, and fit. This also
BUZZ S SAWMILL PF5195 WOODLAND SCENICS BUILDING KIT
1:87 BUILDING KIT BUZZ S SAWMILL PF5195 Buzz s Sawmill is a detailed work of art with all workings of a vintage steam-fired, belt-driven sawmill. Details include interior rafters and shake roof, attached
After printing these plans, several pages will need to be taped together to form a larger plan. Below is a diagram of which pages need assembled.
Watermill Building Plans For complete building instructions and instructional videos, please visit the main web site at www.hirstarts.com/watermill/watermill.html. Using these plans alone will not give
Building the Gothic Church
Building the Gothic Church Mold #54 does not contain all of the blocks to build this church. You will need extra regular blocks (1/2" x 1/2" x 1") and square blocks (1/2" x 1/2" x 1/2"). These blocks can
Inventor s House (Alternate Version)
Inventor s House (Alternate Version) Detailed Building Instructions Model Designed by Dave Graffam Model Built and Instructions Provided by Jerry Jensen For more of Dave s Models please visit www.davesgames.net
Building the Bell Tower
Building the Bell Tower Mold #55 does not contain all of the blocks to build this tower. You will need extra regular blocks (1/2" x 1/2" x 1") and square blocks (1/2" x 1/2" x 1/2"). These blocks can be
SUGAR CREEK HOTEL PHOTO REAL BUILD KIT
SUGAR CREEK HOTEL PHOTO REAL BUILD KIT by Innovative Hobby Supply INSTRUCTIONS FOR: Kit BK 6407 Sugar Creek Hotel Build Kit ~ S scale Free replacement parts are available simply by calling 866 712 4059.
GENERAL INSTRUCTIONS. Woodland Scenics PO BOX 98, LINN CREEK, MO woodlandscenics.com PREPARE PLASTIC PARTS PREPARE METAL CASTINGS
#40700 Popa Weelie's Saloon INSTRUCTIONS CAUTION: Cutting tools recommended. Use with care. This item is not a Children s Product and is not intended for use by Children. Conforms to Health Requirements
Vivian Mansion Assembly Instruction By Laser Dollhouse Designs
Vivian Mansion Assembly Instruction By Laser Dollhouse Designs NOTE 1: Please do a dry assembly using only tape to hold house together. This will get you familiar with parts, location, and fit. This also
Small Town Buildings. Scaled and easy to read patterns and instructions. Shoe / Western Union (with and without porch)
1 /24 th Scale Patterns kiva design G R O U P E 1 Story Flat Roof Yard and Garden Buildings Compatible with Garden Railroads or a delight for any child's collection Overall Dimensions Foundation: 10" x
Corona Concepts presents The Laurel All Wood Dollhouse. Instructions and Assembly Guides
Corona Concepts presents The Laurel All Wood Dollhouse Instructions and Assembly Guides Introduction In Short... Welcome to the exciting world of dollhouses and miniatures. Since the first tab and slot
Contents. Build the Spitfire: Step-By-step
Pack 2 Stages -20 Contents Stage Page Number 8-0 2 - - 7 8-50 5 5-5 6 5-57 7 58-60 8 6-6 9 6-67 20 68-7 Editorial and design by Continuo Creative, 9- North Road, London N7 9DP All rights reserved 20 De
The Hamlin Assembly Instruction By Laser Dollhouse Designs
The Hamlin Assembly Instruction By Laser Dollhouse Designs NOTE 1: Please do a dry assembly using only tape to hold house together. This will get you familiar with parts, location, and fit. This also gives
PS 5077 cu. ft. Boxcar with EOC device. 1:29 scale resin craftsman kit. by Burl Rice
PS 5077 cu. ft. Boxcar with EOC device 1:29 scale resin craftsman kit by Burl Rice www.burlrice.com Bill of materials (not included): Thick/medium viscosity CA PL adhesive, or Gorilla Glue Heavy Duty Construction
Allied Tool is a freelance model of a small manufacturing company that grew from production in a home basement to a new building. Assume a gentleman starts assembling gauges in his basement and the business
Build the Spitfire: Step-By-step. Pack 3 Stages 21-30
Pack Stages 2-0 Contents Stage Page Number 2 72-74 22 75-78 2 79-8 24 82-84 25 85-88 26 89-9 27 92-94 28 95-97 29 98-00 0 0-05 Editorial and design by Continuo Creative, 9-4 North Road, London N7 9DP All
The image above is intended to give you an idea of what the dovecote will look like when finished.
Thank you for buying my book, I hope it is useful and enjoyable in your quest to building your own dovecote. This book will give you step-by step instructions on how to build your own dovecote also included
Darjeeling Coach 4-Wheel First/Second Class
Darjeeling Coach 4-Wheel First/Second Class Introduction This kit was designed in 16mm scale from early Darjeeling drawings and photographs. It uses brass castings available from Brandbright. The instructions
How to assemble the Reims Gueux Pit End Modules #005
How to assemble the Reims Gueux Pit End Modules #005 Depending on which kit you have purchased you will either have a pair of end sections, some centre sections or both. We will describe building of the
Greenhouse Assembly Instructions
Greenhouse Assembly Instructions Our Help Line provides support and advice to customers of Summer Garden Buildings after ordering. For advice before you buy you can phone us free 7 days a week on 0800
KIT BUILDING ED SCHULTZ
KIT BUILDING ED SCHULTZ KIT BUILDING FIVE BASIC MATERIALS: PLASTIC (STYRENE) WOOD LASER CUT & STANDARD PLASTER METAL RESIN ADDING DETAILS PLASTIC KITS TYPICALLY STYRENE TYPE PLASTIC DPM WALTHERS BACHMANN
Kristiana Tudor Assembly Instructions By Laser Dollhouse Designs
Kristiana Tudor Assembly Instructions By Laser Dollhouse Designs Parts for assembly Second floor base Third floor base First floor base First floor walls and porch rails Second floor walls Third floor
About.com :
http://woodworking.about.com/gi/dynamic/offsite.htm?sit...//www.popularwoodworking.com/features/fea.asp%3fid=1088 (1 of 8)1/28/2004 12:05:01 AM Modern Storage Tower The last thing I want to do when starting
Scissor Stool. Written By: Feitan
Scissor Stool If the stool is going to be kept indoors simply rub all the pieces with a Minwax WipeOn Poly before assembling the stool. If it is going to go outdoors use Minwax SparUrathane and coat all
Gardman Lean-to Greenhouse Assembly Instructions
Page 1 Gardman Lean-to Greenhouse Assembly Instructions Our Help Line provides support and advice to customers of Summer Garden Buildings after ordering. For advice before you buy you can phone us free
Corona Concepts presents The Lily All Wood Dollhouse. Instructions and Assembly Guide
Corona Concepts presents The Lily All Wood Dollhouse Instructions and Assembly Guide Introduction In Short... Welcome to the exciting world of dollhouses and miniatures. Since the first tab and slot die-cut
The Gothic Chess Set
The Gothic Chess Set Please note that this chess set is a fairly difficult and time consuming project. I strongly suggest building one or two easier models before tackling this one! The miniatures used
Right On Replicas, LLC Step-by-Step Review * Panzer IV Tank 1:32 Scale Monogram Model Kit # Review
Right On Replicas, LLC Step-by-Step Review 20150108* Panzer IV Tank 1:32 Scale Monogram Model Kit #85-7861 Review The Panzer tank was used throughout World War II and had several modifications during that
Modular Locomotive System Instruction Manual for HBK22 Fowler Body Kit
Modular Locomotive System Instruction Manual for HBK22 Fowler Body Kit Roundhouse Engineering Co. Ltd. Units 6-10 Churchill Business Park. Churchill Road, Wheatley. Doncaster. DN1 2TF. England. Tel. 01302
Background: For the Modeler:
Right On Replicas, LLC Step-by-Step Review 20141020* Space Shuttle with Fuel Tank and Boosters 1:72 Scale Monogram Model Kit #85-5089 Review (Part 1 of 2) Background: The United States Space Transportation
Tools: Every craftsman kit builder should have the basic tools you need to construct this kit. They are:
Thank you for purchasing the Railroad Kits EF20 Car & Loco Repair Shed. This kit is the second one that I ve had the pleasure of working with Ed Fulasz on. Ed painstakingly hand carved the Hydrocal master
San Felipe: Step by Step Pack 3
Pack 3 Your parts Bulwarks Gun port covers x 2 Tools and equipment Wood glue Sandpaper Brushes Wood stain Hammer Pin pusher/nails Razor saw a Remove the longer bulwark and test-fit it in place at the bow
Peter Krause ABN
Peter Krause ABN 25 736 637 163 T/as O-Aust Kits PO Box 743 ALBANY CREEK QLD 4035 AUSTRALIA Phone +61 (0)7 3298 6283 (7.00pm to 9.30pm ONLY) Facsimile +61 (0)7 3298 6287 (24 hours) Mobile 0419 680 584
Instructions and Assembly Guide
Corona Concepts presents The Creekside Cabin All Wood Dollhouse 1997 Corona Concepts Schenevus, NY 12155 All rights reserved These instructions were printed in New York State Instructions and Assembly
FireFighter.21 Building Instructions
A Tom Moorehouse design. Thank-you for purchasing the FireFighter.21. I believe that you will find it to be the best.21 rigger kit available. It has won 1 st place in the 2006 AMPBA nationals! It was designed
(56501) Corona Concepts presents The Willow All Wood Dollhouse. Instructions and Assembly Guide RTD AA
(56501) Corona Concepts presents The Willow All Wood Dollhouse Instructions and Assembly Guide RTD10000572AA Introduction In Short... Welcome to the exciting world of dollhouses and miniatures. Since the
28 ft. Ventilated (Combination) Box Car
28 ft. Ventilated (Combination) Box Car Introduction This laser cut wood kit is an HO scale model of a 28 ft. Ventilated (also known as a Combination) Box Car. The model is based on the Illinois Central
Roof Contour By Bob Parrish
Roof Contour By Bob Parrish This text will show you how to shape the roof contour on Labelle passenger and trolley kits. The height of the clerestory on the two types of kits is different. Passenger kits
Public Pavilion Instructions HO Scale 1:87
PF1 Public Pavilion Instructions HO Scale 1:7 M odel the centerpiece of your layout s public park. Public Pavilion makes the perfect gathering place for weddings, family reunions or Sunday afternoon jazz
Corona Concepts presents The Buttercup All Wood Dollhouse. Instructions and Assembly Guides
Corona Concepts presents The Buttercup All Wood Dollhouse Instructions and Assembly Guides Introduction In Short...Welcome to the exciting world of dollhouses and miniatures. Since the first tab and slot
Railroad Kits PO Box 461 Holden, MA
(Formerly Downtown Deco DD 1004 Fallburg Station) HO Scale. Thanks for purchasing one of my kits. Because different people have different degrees of experience, I'll walk you through, step by step, explaining
Engine Shed Overview
Introduction March 2019 About At ScaleCast we want to provide the best real stone products that go far beyond levels of detail, but also provide an easy and effective product set that help you achieve
N Scale Concrete Coal Dock Instruction Manual
N Scale Concrete Coal Dock Instruction Manual 1. General Overview This kit combines precision laser cut acrylic, photo etched brass and wood parts to make a highly detailed model of the Roberts and Schaefer
Craftman One Car Garage Assembly Instruction by Laser Dollhouse Designs
Craftman One Car Garage Assembly Instruction by Laser Dollhouse Designs NOTE 1: Please do a dry assembly using only tape to hold house together. This will get you familiar with parts, location, and fit.
CONCEPT MODELS SP DOUBLE STACK CONTAINER CARS INSTRUCTIONS Sheep Ranch Rd. Mountain Ranch, CA Web Address:
CONCEPT MODELS Web Address: http://www.con-sys.com 8331 Sheep Ranch Rd. Mountain Ranch, CA 95246 SP DOUBLE STACK CONTAINER CARS INSTRUCTIONS 2 CONCEPT MODELS PARTS Item No. PART NO. DESCRIPTION QTY. 1
Max Launch Abort System Prod. No *Kevlar is a registered trademark of Dupont
Flying Model Parts List Max Launch Abort System Prod. No. 3014 A 11820 - Body Tube 3.5 Diam x 5.5" Long B 11824 - Orange Capsule Base Shoulder Ring C 16032 - Laser-cut Ring motor mount rear D 16033 - Laser-cut
The Reading Tug Schuylkill By: Barry Hensel
The Reading Tug Schuylkill By: Barry Hensel My Reading Lines Central Division layout has needed a tug boat for the Port Richmond coal dock scene for some time. I finally found a Walthers Tug kit for a
If by chance a part is missing or broken please contact us indicating the kit name and part description and we will send you a replacement.
Six Stall Roundhouse Instructions for Assembly of the HO Scale Six Stall Roundhouse Roundhouse Kit Contents: 18ea. Roof Pieces 12 ea. 1/16" Parts Sheets 9ea. 1/8" Parts Sheets 12ea. Floor Pieces 1ea. 1/4"
Building Instructions Diva cabin boat
Building Instructions Diva cabin boat Order no. 3093/00 aero-naut Modellbau Stuttgarterstr. 18-22 D-72766 Reutlingen / Germany http://www.aero-naut.com 1 For pictured building instructions please see the
RACETRACK BLEACHERS PHOTO REAL BUILD KIT
RACETRACK BLEACHERS PHOTO REAL BUILD KIT by INSTRUCTIONS FOR: Kit BK 4802 Racetrack Bleachers Build Kit ~ O scale Free replacement parts are available simply by calling 866 712 4059. Includes two (2 ea.)
Constructing a Cycle Shop
Constructing a Cycle Shop Materials needed 4 sq ft 3/8 outdoor plywood 2 sq ft. 1/2 outdoor plywood 2 sheets of Precision Sheet plastic ( cement block pattern) Clear window glass: 2 sq ft. to allow for
Engineering Directive
Thing-a-ma-Jig Finishing To Finish a model means to apply paint and other decorations to complete the look of your model. Meaning to apply a finish. That is what we will discuss in this section. Applying