KAISER TOOL COMPANY, INC.
|
|
|
- Jared Walters
- 5 years ago
- Views:
Transcription
1 SERTS External grooving. Internal Static O-Ring grooving with 1.250" minimum bore diameter. Sub-micron grain DUR-MX 2000 and 5000 arbides. Inserts available with TiN, Ti, TiN and Diamond coating. Insert in Right Hand Toolholder Shown RDII DEPTH OF UT LUDED NGLE BK LERNE MODIFITIONS SEE PGE 8-3 FOR DDITIONL LED NGLE TOP RKE (SIDE VIEW) HIP BREKER (SIDE VIEW) SIDE LERNE (END VIEW) N, SWISS, ONVENTIONL STYLE ROUND STYLE TOOLHOLDER THBIT KISER TOO 3/4" GROOVE 3/4" GROOVE N THBIT KISER TOOL THBIT KISER TOOL O 1" ROUND REVER THBIT PG 7-3 PG 7-4 PG 7-7 PG 7-8 DEMONSTRTION SPEEDS ND FEEDS PPLITION REFERENE TROUBLESHOOTG TEHNIL SETIONS PG 9-10 PG 9-3 PG KISER TOOL OMPNY,. Phone: 888-THBIT ( ) or (260) Fax: 888-THFX ( ) or (260)
2 O.D. STTI O-RG SERTS FRONT RKE: Primary 10 honed, Secondary ".145" " BK LERNE: 7 included angle SIDE LERNE: 5 both sides RDIUS:.010" or.020" TOP RKE: 0 LED NGLE: 0 DEPTH OF UT:.200" or.250" STTI O-RG GROOVG ORDERG STRUTIONS Select the ORDER ODE in the table below that represents your selection of groove width and insert grade. The ORDER ODE for a.095" insert width in DUR-MX 2000 is: LGOR095D2R010 SPEIFITIONS ORDER ODE FO. Insert & Radius Insert Width Depth of ut Insert Grades See Page 9-5 for expanded material descriptions and Page 9-10 for Speeds and Feeds information dd-ons Use 'Order ode' and dd Toolholder atalog Section 7 '' 'B' DUR-MX 2000 arbide For Steel & ±.001" Interrupted utting DUR-MX 5000 arbide For luminum & Non-ferrous oating Page 9-6 Use Toolholders Beginning With entered.010" orner Radius.095".250" LGOR095D2R010 LGOR095D5R ".200" LGOR142D2R010 LGOR142D5R010 TiN add '' TiN add 'D' TilN add 'E' entered.020" orner Radius.125".250" LGOR125D2R020 LGOR125D5R020 Diamond add 'F' KISER TOOL OMPNY,. Phone: 888-THBIT ( ) or (260) Fax: 888-THFX ( ) or (260)
3 STRIGHT TOOLHOLDERS Designed for N, conventional and top slide position on Swiss screw machines. sizes 5/16", 3/8", 1/2", 5/8", 3/4", 1" and 1-1/4". Metric sizes also available. THBIT KISER TOOL OMPNY,. 3/4" GROOVE N TURN LGS34R B GROOVG FE GROOVG THREDG PRTG SERT THBIT THBIT ORDERG STRUTIONS Select the ORDER ODE in the table below that represents your selection of shank dimensions. The ORDER ODE for a.750" Right Hand square shank for inserts beginning with is: LGS34R SPEIFITIONS Dimensions Includes, lamp and Hardware ORDER ODE 7-3 Straight Use right with right hand inserts Use left with left hand inserts For Inserts Beginning '' 'B' '' With RIGHT LEFT HND HND.312".500" 4.840" LGS56R LGS56L.375".500" 4.840" LGS38R LGS38L.500".500" 4.840" LGS12R LGS12L.625".625" 4.840" LGS58R LGS58L.750".750" 4.840" LGS34R LGS34L 1.000" 1.000" 4.840" LGS01R LGS01L 1.250" 1.250" 4.840" LGS14R LGS14L 8mm.500" 4.840" LGS08RM LGS08LM 10mm.500" 4.840" LGS10RM LGS10LM 12mm.500" 4.840" LGS12RM LGS12LM 16mm.750" 4.840" LGS16RM LGS16LM 20mm 1.000" 4.840" LGS20RM LGS20LM 25mm 1.000" 4.840" LGS25RM LGS25LM KISER TOOL OMPNY,. lamp Screw Wrench Pin Right Hand: lamp X Left Hand: lamp Y S3808 W1005 P0206 Phone: 888-THBIT ( ) or (260) Fax: 888-THFX ( ) or (260)
4 90º TOOLHOLDERS Designed for N and conventional machines. sizes 5/16", 3/8", 1/2", 5/8", 3/4", 1" and 1-1/4". Metric sizes also available. 3/4" GROOVE N TURN LGSF34R THBIT KISER TOOL OMPNY,. B GROOVG FE GROOVG THREDG PRTG SERT THBIT THBIT ORDERG STRUTIONS Select the ORDER ODE in the table below that represents your selection of shank orientation and dimensions. The ORDER ODE for a.750" right hand shank for inserts beginning with is: LGSF34R SPEIFITIONS Dimensions Includes, lamp and Hardware For Inserts Beginning With ORDER ODE 90º Use right with left hand inserts Use left with right hand inserts '' 'B' '' RIGHT LEFT lamp Screw Wrench Pin HND HND.312".500" 4.840" LGSF56R.375".500" 4.840" LGSF38R.500".500" 4.840" LGSF12R.625".625" 4.840" LGSF58R LGSF58L.750".750" 4.840" LGSF34R LGSF34L 1.000" 1.000" 4.840" LGSF01R LGSF01L 1.250" 1.250" 4.840" LGSF14R LGSF14L lamp S3808 W1005 P0312 8mm.500" 4.840" LGSF08RM 10mm.500" 4.840" LGSF10RM 12mm.500" 4.840" LGSF12RM 16mm.750" 4.840" LGSF16RM LGSF16LM 20mm 1.000" 4.840" LGSF20RM LGSF20LM 25mm 1.000" 4.840" LGSF25RM LGSF25LM GROOVE 'N TURN TOOLHOLDERS KISER TOOL OMPNY,. Phone: 888-THBIT ( ) or (260) Fax: 888-THFX ( ) or (260)
5 SWISS SREW MHE TOOLHOLDERS Designed for top slide position on Swiss screw machines. sizes 1/2", 12mm and 16mm in right hand orientation. B T H I N B I T KISER TOOL OMPNY,. 16MM RH L SERIES GROOVG THREDG PRTG SERT THBIT THBIT ORDERG STRUTIONS Select the ORDER ODE in the table below that represents your selection of shank orientation and dimensions. The ORDER ODE for a.500" shank, right hand tool for inserts beginning with is: LSS12R SPEIFITIONS Dimensions Includes, lamp and Hardware ORDER ODE '' 'B' '' For Inserts Beginning With lamp Screw Wrench Pin Right Hand.500".500" LSS12R Use with right hand and centered inserts Left Hand Use with left hand and centered inserts 12mm 12mm 4.840" LSS12RM 16mm 16mm LSS16RM.500".500" LSS12L 12mm 12mm 4.840" LSS12LM 16mm 16mm LSS16LM lamp S3808 W1005 P KISER TOOL OMPNY,. Phone: 888-THBIT ( ) or (260) Fax: 888-THFX ( ) or (260)
6 ROUND REVERSIBLE TOOLHOLDERS Designed for boring bar positions on all machines. an be used with a boring head to trepan on a mill. may need to be shortened. Toolholder reversible by removing face and bottom screws and rotating head 1/2 turn. sizes 1/2", 5/8", 3/4" and 1". ll 1/2", 5/8" and 3/4" shanks are made from 1" shank. 1" 5.5" 5/8" REVERSIBLE ROE58 THBIT KISER TOOL OMPNY,. GROOVG FE GROOVG THREDG PRTG SERT THBIT THBIT ORDERG STRUTIONS Select the ORDER ODE in the table below that represents your selection of shank dimensions. The ORDER ODE for a.625" round shank for inserts beginning with is: LROE58 SPEIFITIONS Dimensions Includes, Head, lamp and Hardware ORDER ODE '' For Inserts Beginning With Head Only Includes lamp and Hardware For Inserts Beginning With Head Screws Head Wrenches lamp lamp Hardware.500" LROE12 RROE12 Right Hand or Left Hand Use as right hand with right hand inserts; Use as left hand with left hand inserts; Use as either hand with centered inserts..625" LROE58 RROE58 1 each: 1 each: LROEH S5806 W1006 S2810 W " LROE34 RROE34 lamp Screw: S3808 Wrench: W " LROE01 RROE KISER TOOL OMPNY,. Phone: 888-THBIT ( ) or (260) Fax: 888-THFX ( ) or (260)
7 ROUND TERNL TOOLHOLDERS Designed for boring bar positions on all machines. Toolholder reversible for left and right hand orientation. sizes 1/2", 5/8", 3/4" and 1". ll 1/2", 5/8" and 3/4" shanks are made from 1" shank. 1" GROOVG FE GROOVG THREDG PRTG SERT THBIT THBIT ORDERG STRUTIONS Select the ORDER ODE in the table below that represents your selection of shank orientation and dimensions. The ORDER ODE for a.625" right hand shank for inserts beginning with is: LR5806 Right Hand or Left Hand SPEIFITIONS Minimum Bore Diameter Dimensions '' '' Includes, lamp and Hardware For Inserts Beginning With ORDER ODE without pin lamp Screw Wrench Pin.500" LR " 5.500" LR5806 ROUND TOOLHOLDERS Use as right hand with left hand inserts; Use as left hand with right hand inserts; Use as either hand with centered inserts ".750" LR " LR " " LR0112 lamp S3808 W1005 P0305 KISER TOOL OMPNY,. Phone: 888-THBIT ( ) or (260) Fax: 888-THFX ( ) or (260)
KAISER TOOL COMPANY, INC.
U.S. PTENT NOS. 6,688,816 and 6,824,333 S External threading within.070" of a shoulder. Internal ME threading with 1.250" minimum bore diameter. 4 threads per inch and greater. Sub-micron grain DUR-MX
U.S. PATENT NOS. 6,688,816 and 6,824,333 INSERT WIDTH TOP RAKE (SIDE VIEW) APPLICATION REFERENCE PG 9-20
U.S. PTENT NOS. 6,688,816 and 6,824,333 SERTS.025",.045",.062",.085" and.115" Parting off up to 1" diameter 0 or 7 lead angle Centered or Offset Sub-micron grain DUR-MX 2000 and 5000 s and High Speed Steel.
APPLICATION REFERENCE
O.D./I.D. S Insert Shown in Right Hand Toolholder D THINIT LGI093D2.240" +.0 -.0 FRONT RKE: RIDE: Primary 10 honed, Secondary 15 HIGH SPEED STEEL: 15 K LERNE: 2-1/2 both sides SIDE LERNE: 0 both sides
KAISER TOOL COMPANY, INC.
O.D./I.D. THREDING INSERTS D FRONT RKE: 15 RDIUS:.002" or.000" TOP RKE: 0 PROFILE: 60 Insert Shown in Toolholder PRODUT INFORMTION External threading within.046" of a shoulder. Internal threading with
APPLICATION REFERENCE
O.D./I.D. GROOVING INSERTS Insert Shown in D THINIT LGI093D2.240" +.0 -.0 FRONT RKE: RIDE: Primary 10 honed, Secondary 15 HIGH SPEED STEEL: 15 K LERNE: 2-1/2 both sides SIDE LERNE: 0 both sides RDIUS:
PRODUCT SELECTION GUIDE - TOOLHOLDERS ADAPTERS
PRODUT SELETION GUIDE - TOOLHOLDERS www.thinbit.com/qr7-1 Scan this code for additional information. DPTERS dapters Square and round adapters Use for boring bars and solid carbide tooling THINIT ROUND
PRODUCT SELECTION GUIDE - FACE GROOVING
PRODUCT SELECTION GUIDE - FACE GROOVING PAGE 2-3 For internal diameters of.125" and larger Groove widths.004"-.250" Solid carbide shanks in 1/8", 3/16", 1/4", 5/16", 3/8" and 1/2" diameter FACE GROOVING
O.D./I.D. GROOVING AND TURNING INSERTS .145" .240" ORDERING INSTRUCTIONS
O.D./I.D. GROOVING ND TURNING INSERTS FRONT RKE: CRIDE: Primary 10 honed, Secondary 15 HIGH SPEED STEEL: 15 CK CLERNCE: 2-1/2 both sides SIDE CLERNCE:.004" -.019" - 0 both sides.020" -.150" - 5 both sides
tel fax
distributed by : Newman Tools Inc. Tel 1-800-465-1384 Fax 1-800-605-2442 Tel 613-836-6776 Fax 613-836-9070 www.newmantools.com thread mills - product overview Thread Mills cut a thread using helical interpolation.
VEX-P. Combination of Drilling and Front and Back Chamfering in One Operation. carbide drill tip combined with patented. blade replacement.
ombination of rilling and Front and Back hamfering in One Operation. carbide drill tip combined with patented blade replacement from stock at. No. HT015 ase Study atalog HT015No. HT14 Study etails TOOL
KEO Cutters a name you can trust!
KEO utters a name you can trust! The world of cutting tools is changing every day. KEO utters is getting better every day as we implement and execute our continuous improvement strategies. This new catalog
Page 1-7 Page º(+) TOP RAKE (SIDE VIEW) APPLICATION REFERENCE PGS 9-10, 9-12, 9-18 & 9-20 ORDERING INSTRUCTIONS
U.S. PATENT N. 5,638,728 PRDUCT INFRMATIN 2, 3, 4, 5 and 6mm insert widths. Recessed pocket and raised edge for chip control. Internal grooving, external grooving, face grooving and parting. Sub-micron
Mission Statement. 2005, Manchester Tool Company. All rights reserved.
Mission Statement Manchester Tool Company shall provide tooling systems to the metal cutting and similar industries, specializing in cutoff, grooving and complimentary niche products. We are dedicated
CHAPTER C. Width of cut. Tool type. DOC t max. Page number
Step #1: Establish bore diamter Step #2: Find Depth of ut (DO) requirements Step #3: Follow column and row to find correct tool type Step #4: Look up tool type to find available widths HAPTER DO t max.063
Grooving Threading Parting Boring Turning Face Grooving Custom Tooling Form Tools. thinbit.com
Grooving Threading Parting Boring Turning Face Grooving Custom Tooling Form Tools 2014 thinbit.com SECTION 1: GROOVING PG 1-9 GROOVING AND TURNING.004 THROUGH.150 IN.001 INCREMENTS PG 1-13 1.000 DEPTH
CHAMFERING RINGS UPDATED. Ring Diameters: 1.34, 1.50, 1.65 and Fits Body Diameters: 10.0mm(.3937") mm(1.000")
Ring Diameters: 1.34, 1.50, 1.65 and 1.85 Fits Body Diameters: 10.0mm(.3937") - 25.4mm(1.000") L:D Ratios: Gold Twist 3xD, 5xD, 8xD & 12xD Quad Twist & Quad Drill+ 3xD, 4xD & 5xD Maximum Chamfer DOC:.118"
AMERICAN QUALITY AMERICAN VALUE AMERICAN PRIDE
AMERICAN QUALITY AMERICAN VALUE AMERICAN PRIDE FEATURING OVER 48 YEARS OF COMPLETE TOOLING SOLUTIONS FOR GROOVING THREADING PARTING BORING TURNING FACE GROOVING SPECIALS FORM TOOLS MADE IN THE U.S.A. SINCE
SNAP. For more case studies, testimonials, and videos. We are also available on:
www.heuletool.com For more case studies, testimonials, and videos We provide online tool selectors for the COF,, DEF and BSF product groups. Simply enter your application information and the correct tool
Value-Added Programs. Refurbishment Service. Refurbishment Delivery Service. Just In Time Inventory Programs. Commodity Management
Value-Added Programs ClappDiCO offers a number of value-added programs that reduces our customers manufacturing costs on a per unit basis. Refurbishment Service A complete refurbishment service to restore
HC Hydraulic Expansion Chucks
Technical Information HC Hydraulic Expansion Chucks design, function, effect, and application features, handling, and action application instructions precision tool length setting torques accessories sealed
MATERIAL & FINISH SPECIFICATIONS INSTALLATION. For Types FH, FHS, FHA, FHL, FHLS, TFH, TFHS, HFH, HFHB, HFHS and HFE studs
MTERIL & FINIS SPEIFITIONS s (1) Fastener Materials Standard Finishes Optional Finish (2) For use in Sheet ardness: External, Precipi- Zinc Per Zinc Per 50 or 55 or 70 or 80 or 85 or 92 or NSI 300 2024-T4
888 THINBIT 888 THINFAX THINBIT.COM
SINCE 1964 888 THINBIT 888 THINFAX THINBIT.COM GROOVING THREADING PARTING BORING TURNING FACE GROOVING CUSTOM TOOLING FORM TOOLING MILL TOOLING 2018 thinbit.com MADE IN THE USA SECTION 1: GROOVING PG 1-9
ARNO (UK) Limited We have a passion for precision. Holder 1 see page 3. Holder 35. Holders 70 see page 4. see page 5. Save Over 30% see page 8-10
Promotions - 2017 ARNO (UK) Limited NC - Grooving System The flexible solution for both axial and radial grooving SA Part-Off System With or without through tool coolant see page 2 Holder 1 see page 3
Metal Drilling. Engineered for Controlled Precision and Speed METAL DRILLING. Tip Geometry. Drill Bit Selection. 135 Split Point
Engineered for Controlled Precision and Speed Shank Diameter Shank Point Angle Drill Bit Diameter : Point Angle: Drill Diameter: Shank : : Tip Geometry 118 Conventional Point 118 Point Angle 135 Split
Boring. Reaming. Burnishing. Threading. Drilling. Opening Drill. Large Diameter Replacable IC Insert Drilling System. Specials
oring Reaming urnishing Threading rilling Opening rill Large iameter Replacable I Insert rilling System Specials Opening rill Large iameter Replaceable I Insert rilling System iameter Range: 50.80mm -
DRA DRA. MagicDrill. High Efficiency Modular Drill. Excellent hole accuracy with a low cutting force design. High Efficiency Modular Drill
High Efficiency Modular Drill High Efficiency Modular Drill MagicDrill DRA Excellent hole accuracy with a low cutting force design Optimal web thickness limits deflection Fine chip breaking and smooth
MACHINING PROCESSES: TURNING AND HOLE MAKING. Dr. Mohammad Abuhaiba 1
MACHINING PROCESSES: TURNING AND HOLE MAKING Dr. Mohammad Abuhaiba 1 HoweWork Assignment Due Wensday 7/7/2010 1. Estimate the machining time required to rough cut a 0.5 m long annealed copper alloy round
HAND TOOLS. Moore & Wright Engineers Squares. For more information visit Features. WORKSHOP SQUARES: Grade B DIMENSIONS TABLE (MM)
Moore & Wright Engineers Squares Precision ground blade and stock Blind rivetted construction Hardened and tempered blades 3" & 4" available in Retail Packs 4006 WORKSHOP SQUARES: Grade B Blade Length
TRAINING MANUAL. Part 3 REAMERS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 3 REAMERS 1 Purpose of Reamers REAMERS A reamer produces an accurate and highly finished round hole to a much finer tolerance than that produced by a drill.
Stable parting-off operations due to unique clamping system
GrooveLine Tungaloy Report No. 504-US DUOJUST-CUT Stable parting-off operations due to unique clamping system ACCELERATED MACHINING GrooveLine DuoJust-Cut, a new line of small tools with a durable insert
I 640 West. c Offi. pany Phone. c ~ g CHICAGO 6. Ill. M h:tjryant OMPOUND RING BAR SUPPORT. GilBERT C DEarbom ~.
ll / - M h:tjryant c Offi I 640 West g CHICAGO 6. Ill pany Phone. c ~ GilBERT C DEarbom 2-5566 ~. OMPOUND TIL~:~ BORING, ~~: F:o~~:YH~~~ DRILLING ':~~~N~:E~~7:NE RECTANGULAR TAB ~~~;:E~:~z:T~~L TABLEe
SINGLE POINT TOOLS. Mini Boring Bars Mini Boring Bars come in a range of diameters from to inch. They are fluted for maximum strength.
SINGLE POINT TOOLS All single point tools are designed for internal machining on a lathe. The helical boring bars can be used for both lathe and mill applications. All cutting tools are made from premium
with better tools from Introducing: Dapra's New Modular Heads Designed to Screw On to Industry Standard Systems
CUTTING Times Vol. 4, Issue 1 with better tools from Dapra Corporation 66 Granby Street, Bloomfield, CT 06002 1-800-243-3344 860-242-8539 Fax 860-242-3017 Email info@dapra.com www.dapra.com Introducing:
ALBRECHT PRECISION KEYLESS DRILL CHUCKS THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL CHUCKS
ALBRECHT PRECISION KEYLESS DRILL S THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL S ALBRECHT The World's Most Consistently Accurate Drill Chucks For the past 00 years, Albrecht s line of precision drill
COBALT Part Number. Price Each
OMINED DRILL & OUNTERSINKS OMINED DRILL & OUNTERSINKS PLAIN TYPE-60, 82 and 90 Included Angle Used for producing center holes in components or workpieces which requre machining between centers Available
DRILL SETS-JOBBER, STUB, LETTER & WIRE SIZES
DRILL SETS-JOBBER, STUB, LETTER & WIRE SIZES JOBBER DRILL SETS 13 Piece -1/16-1/4" x 64ths Material Drill Point Finish Brand HSS 118 Bright Precision Twist Drill PTD-090164 $21.15 HSS 118 Black Oxide Precision
MILLING OF T-SLOTS. Excellent removal of chips, flushed by through coolant supply. In the UNITED STATES call us toll free HORN
MILLIN OF T-SLOTS Excellent removal of chips, flushed by through coolant supply. 1 MILLIN OF T-SLOTS MILLIN SHANK MU311.669 Material of shank: Carbide - iving a good vibration resistance for use with Insert
Lathe Accessories. Work-holding, -supporting, and driving devices
46-1 Lathe Accessories Divided into two categories Work-holding, -supporting, and driving devices Lathe centers, chucks, faceplates Mandrels, steady and follower rests Lathe dogs, drive plates Cutting-tool-holding
BUY 1 Toolholder and 1 Cartridge. and GET 10 FREE INSERTS! up to $ value. Built for Productivity!
KOOL Cut MODULAR Turning & Grooving System BUY 1 Toolholder and 1 Cartridge 10 FREE INSERTS! up to $229.40 value TM KOOL Cut TM Modular Turning & Grooving Built for Productivity! Interchangeable s & Cartridges
Internal Grooving Application Added for ISCAR s Indexable Multifunction Tools
JANUARY Page 1 / 7 Internal Grooving Application Added for ISCAR s Indexable Multifunction Tools JANUARY Page 2 / 7 Highlights ISCAR is introducing new tools which can carry the current multifunction XCMT-MF
VIEWING OPTIONS: In Adobe PDF Viewer, from the main toolbar choose View, then Page Display, turn on Two-Up and Show Cover Page During Two-Up
VIEWING OPTIONS: To make our catalog easier to read we recommend using a two page display, as some sections have one page for the exploded view and one for the parts listing. Changing these settings will
Spotlight
Spotlight 2010 www.vargus.com Specials Advanced Tailor Made Solutions Inserts Solid Carbide Toolholders Mega Line Special Solution for Extra Large Pitches (up to 24mm) Designed to be extra tough, use the
UPDATE. NEW Gold-QuadF 09 09mm IC Insert Sizes
Styles: End Mill 15G1F Face Mill 5G5F, 5G6F s: 1.000" - 3.000" Inserts: SDXS0904MPR-MM SDXS0904MPR-MR SDXS0904MPR-MR1 Grades: IN4004 IN4005 IN4030 IN4035 UPDATE NEW Gold-QuadF 09 09mm IC Insert Sizes Features
Quotation Swastik Rs Advance Rs
Quotation 77 Plain Plug Gauges H7 and Other Std With certificate Swastik / Advance / Baker make Size - mm 3 9 10 19 20 29 30 39 40 49 50 59 60 69 70 79 80 89 Advance Rs. 410 480 610 820 970 1160 1750 2200
Everything for metal Machining Under one Roof M I R C O N A
IUT 0058E Everything for metal Machining Under one Roof M I R C O N A MIRCONA is a Swedish company with its head office situated in the town of Gävle, Sweden. The main activity of the company since it
BNBX Type BNBX L103. Small Hole Boring Bars SUMIBORON
Small ole BNBX Type BNBX Boring & Facing Brazed 3 Newly developed high rigidity slit-clamping system, excellent for small hole boring Maximum overhang of /D=5 possible. Minimal bar deformation produces
NEW RÄNDELFRÄSWERKZEUGE KNURLINGTOOLS
NEW RÄNDELFRÄSWERKZEUGE KNURLINGTOOLS KNURLING TOOLS Swarovski Optik KG Swarovskistraße 70 A-6067 Absam Fon +43 (0)5223 511-0 Fax +43 (0)5223 511-6550 info@quick-tools.at www.quick-tools.at Milled knurls
mila-wall (Series100) General Operating Instructions page 1 of 15
mila-wall (Series100) General Operating Instructions page 1 of 15 Step #1: Before setting up walls, lower adjustable leveling feet on each panel approximately 1". This will allow access to the threaded
Recommended Dimensional Guidelines for Single Screws
The Society of the Plastics Industry s Machinery Component Manufacturers Division Recommended Dimensional Guidelines for Single Screws The following recommendations for single screws of injection molding
INSTRUCTIONS FOR USE B2 FORM KNURLING TOOL
INSTRUCTIONS FOR USE B2 FORM KNURLING TOOL Contents CONTENTS 1. General... 2 1.1 Introduction... 2 1.2 Tool Construction... 3 2. B2 Tools... 6 2.1 Technical Data... 6 2.2 Overview: Main components... 7
Indexable Center Drill
i-center indexable center drill (patent pending) First Indexable center drill in the world. Shortens set up time and center drilling time. Increases tool life which reduces tooling cost. Special forms
Technical T-A & GEN2 T-A GEN3SYS APX. Revolution & Core Drill. ASC 320 Solid Carbide. AccuPort 432. Page CONTENTS. Set-up Instructions 256
Technical ASC 0 Solid Carbide CONTENTS Page Set-up Instructions 6 AccuPort 4 Recommended Speeds & Feeds 60 Guaranteed Application Request Form 99 +44 (0)84 400 900 +44 (0)84 400 0 enquiries@alliedmaxcut.com
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
PARTING ISCAR PARTING USER GUIDE. Parting and Grooving. Insert Positioning
90 80 0 70 10 60 20 50 30 40 Parting and Grooving Selection of Inserts For a proper match of insert and cutting material to application, the following variables must be taken into consideration: Width
Facing and Boring Heads UPA
Facing and Boring Heads UPA Universal Facing and Boring Heads For use on universal milling and boring machines, jig borers etc. suitable for all types of work in single or series production. Product range
M2 Antenna Systems, Inc. Model No: YAGI ANTENNA
M Antenna Systems, Inc. Model No: 4.5-7 YAGI ANTENNA SPECIFICATIONS: Model... 4.5-7 Frequency Range... 4.0 To 4.5 MHz *Gain... 0 To 7 dbi Front to back... 0 db over the rear 80 Beamwidth... E=44 H=50 typical
Premium Power Tool Accessories Proudly Made in the USA
Premium Power Tool Accessories Proudly Made Table of Contents Make it Snappy Tools Premium Power Tool Accessories Proudly Made About Us Founded in a basement machine shop in Minnesota in 1962, we are a
Broaching, External External Broach Tool Holders...18 Driven Broach Tool Holder for Multi's External Broaches...19
TABLE OF CONTENTS CATALOG 2017 TITLE PAGE Broaching, Internal Swiss Adjustment Free Broach Tool Holders...8 Swiss Broaching Heads for ER Collet Chucks...7 Adjustable Broach Tool Holders...10 CNC Adj. Free
Diamond Burnishing Tools
Diamond Burnishing Tools www.cogsdill.co.uk Diamond burnishing Overview The Cogsdill Diamond Burnishing Tool is designed to produce high quality, low microinch burnished finishes on shafts, large bores,
ACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through
Tiny Tools New Products
Tiny Tools ew roducts Inch 2016-17 Tiny Tools CR Carmex ulti-task Tiny Tools Carmex is introducing a new and innovative ulti-task Tiny Tool CR for Boring, Turning, Facing and Chamfering with a single tool.
Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes
MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing
INSTRUCTIONS FOR USE LA, MAMMUT & STR KNURLING TOOLS
INSTRUCTIONS FOR USE LA, MAMMUT & STR KNURLING TOOLS Contents CONTENTS 1. General... 2 1.1 Introduction... 2 1.2 Tool Construction... 3 2. LA-Tool... 5 2.1 Technical Data... 5 2.2 Overview: Main Components...
no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
Our aim is to offer all our customers an optimal level of product benefits, product advice and customer service.
Knurling Technology The Company 2 The company Hommel + Keller was founded in 1926 by the precision technician Jakob Keller and his business partner Georg Hommel. During the first years of its operation,
Cutting Tools DIGEST Catalog
Cutting Tools DIGEST Catalog Insert Grade CVD Coating Innovation CA5 series Ultra fine interface increases adhesion strength to provide long tool life and stable machining High aspect ratio of α-al 2 O
Linear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
DRV Magic Drill. High Efficiency Indexable Drill. Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation
DRV Magic Drill High Efficiency Indexable Drill Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation xd to 6xD drilling lineup with 4 chipbreakers for various machining applications High
Operating instructions. Fine boring head Ø3-88 with digital display
Operating instructions Fine boring head Ø3-88 with digital display English 1. Basic safety information Before first use, please read the operating instructions carefully. These provide important safety
Lower Spindle Power Consumptionn
ower Spindle Power Consumptionn > Five cutters for drilling Ø13~Ø50 mm. > One insert for all kind of materials. > The drilling is done by helical interpolation. (circular ramping milling) Nine9 NC Helix
Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY
TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form
Turning and Lathe Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of lathe principles and be able to identify the basic tools and techniques
Specifications for Lathe L- 45/5000(for items from Sr. No.01 to Sr. No.22 in Indent)
Specifications for Lathe L- 45/5000(for items from Sr. 01 to Sr. 22 in Indent) Annexure-1 Sr. Specification of Parameter Parameter Value 1.0 Capacity 1.1 Height of centers (nominal) (mm) 450 1.2 Type of
PUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
Special reamers. Figure N 1 Reamer with descending cutting edges in carbide (Cerin)
Special reamers There is a wide category of special reamers, ie non-standard, that are suitable to address particular problems encountered in the finishing holes, both for maintenance of individual pieces
2 edges Tip-Bar for micro boring HP type
2 edges Tip-Bar for micro boring P type New proposal for cost reduction igh cost performance with 2-edge insert Boring Back Boring Grooving ace Grooving Threading rom -edge to 2-edge insert 2 edges Tip-Bar
Precision Retention Knobs and Setup Equipment
Precision Retention Knobs and Setup Equipment Retention Knobs All mating surfaces are precision ground Manufactured to the highest standards for maximum safety and long life ightening Fixtures Preset tools
BSF. Large Ratio Automatic Back Counterboring & Spotfacing Tool
BSF Large Ratio Automatic Back Counterboring & Spotfacing Tool Counterbores up to 2.3xd Replaceable carbide coated blades for extended life Very simple to use Suitable for CNC machines with through coolant
Chapter 23: Machining Processes: Hole Making Part A (Lathe Operations, Boring, Reaming, Tapping)
1 Manufacturing Processes (2), IE-352 Ahmed M El-Sherbeeny, PhD Spring 2017 Manufacturing Engineering Technology in SI Units, 6 th Edition Chapter 23: Machining Processes: Hole Making Part A (Lathe Operations,
INSTRUCTIONS FOR USE A1 & A2 KNURLING TOOLS
INSTRUCTIONS FOR USE A1 & A2 KNURLING TOOLS Contents CONTENTS 1. General... 2 1.1 Introduction... 2 1.2 Tool Construction... 3 2. A1-Tools... 5 2.1 Technical Data... 5 2.2 Overview: Main Components...
ACCESSORIES.
Rotary, Dividing, & Cross Tables 166 Indexes 167 Dividing Heads 168 Screw Jack Sets 168 Angle Plates & V-Blocks 169 Quick Change Tool Posts & 170-171 CNC Tool Holder Bushings 171 Lathe Chucks 172-177 www.sowatool.com
+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need
Innovative insert provides superior
TurnLine Tungaloy Report No. 417-US MINIFORCE-TURN Innovative insert provides superior economic advantages! ACCELERATED MACHINING TurnLine VXGU insert, new toolholders, new chipbreaker, and new grades
model tsa-sa48 Sliding Crosscut Table installation guide
model tsa-sa48 Sliding Crosscut Table installation guide A Note About Color Variations Among Anodized Aluminum Components Congratulations on the purchase of this SawStop Sliding Crosscut Table. We at SawStop
INDEXABLE BORING BAR AND INSERTS FLAT TOP, CHIP CONTROL, CBN, AND PCD
INDEXABLE BORING BAR AND S FLAT TOP, CHIP CONTROL,, AND 80 Diamond.156 IC R.156.040 80 DIAMOND FLAT TOP 80 DIAMOND CHIP CONTROL AT6+ 0.003 ACD5031 ACD5031E AT6+ 0.007 ACD5071 ACD5071E AT6+ 0.015 ACD5151
External Turning. Outline Review of Turning. Cutters for Turning Centers
Outline Review of Turning External Turning 3 External Turning Parameters Cutting Tools Inserts Toolholders Machining Operations Roughing Finishing General Recommendations Turning Calculations Machining
10 ZX FACING / CONTOURING HEADS 16 ZX MODULAR BORING TOOLS (MBT) 22 ZX VALVE SEAT POCKET TOOLS 31 SPECIAL APPLICATIONS 35 HOW TO REQUEST A QUOTATION
ZX Systems TM FACING, & CONTOURING ZXBORING, SYSTEMS contents 2 OVERVIEW OF ZX BORING, FACING, AND CONTOURING SYSTEMS 10 ZX FACING / CONTOURING HEADS 16 ZX MODULAR BORING TOOLS (MBT) 22 ZX VALVE SEAT POCKET
GENERAL SAW CORPORATION
GENERL SW ORPORTION Router its and Other Tooling Made in the U.S.. Effective Date: 01/01/2003 2518 ndalusia oulevard ape oral, Florida 33909 Phone: (239) 574-2707 Fax: (239) 574-5328 Plunge arbide Tipped
Operating instructions. Twin cutter boring head Ø mm
Operating instructions Twin cutter boring head Ø23.5-153.0 mm English 1. Basic safety information Before first use, please read the operating instructions carefully. These provide important safety information
REVERSE CIRCULATION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
REVERSE CIRCULATION MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com REVERSE CIRCULATION DRILLING TABLE OF CONTENTS REVERSE CIRCULATION DRILLING OVERVIEW...2 REVERSE
Guide Pulley System [GPS]
![Guide Pulley System [GPS]](/thumbs/86/93494578.jpg "Guide Pulley System [GPS]")
Guide Pulley System [GPS] The purpose of the guide pulley system is to guide the wire from the dancer pulley system to the guide rollers. Two of these systems exist: on both sides of the machine. The pulley
T360. Holders and Inserts - T-Cap. Features T333. Holders T335. Inserts T336. Clamping units T337. Sleeves for clamping units T338.
T358 T329 Holders and Inserts - T-Cap Features Holders Inserts Clamping units Sleeves for clamping units T-CAP Kits T333 T335 T336 T337 T338 T339 User Guide Comparison test results Surface finish Tool
Back-Spotfacing. Flipcut For back-spotfacing and backor front-chamfering operations from one side, in one set-up. Back-Spotfacing. & Chamfering TOOLS
COGSDILL TOOL PRODUCTS, INC. Flipcut For back-spotfacing and backor front-chamfering operations from one side, in one set-up. Back-Spotfacing & Chamfering TOOLS Back-Spotfacing Available from stock for
Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratch
88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have
New Standard Line for Heavy Duty Applications with Extra Large Pitches up to 24mm or 1tpi
www.vargus.com For Extra Large Pitches New Standard Line for Heavy Duty Applications with Extra Large Pitches up to 24mm or 1tpi Offering a wide range of profiles for internal and external applications:
New Version. High performance economical double sided inserts with 4 cutting edges! Shoulder milling cutter. Featuring new 18 size insert NEW
Keeping the Customer First Tungaloy Report No. 390-US Shoulder milling cutter Version Featuring new 18 size insert High performance economical double sided inserts with 4 cutting edges! NEW LQMU11 LQMU18
Optimized flute design Better chip evacuation. Carbide substrate Higher heat resistance, higher speed.
Thread Mills Available for the first time, our solid thread mills are designed to be the highest quality thread milling solution. WIDIA-GTD Cut up to 63 HRC. Improved overall thread quality. Optimized
AUTOMATED MACHINE TOOLS & CUTTING TOOLS
CAD/CAM COURSE TOPIC OF DISCUSSION AUTOMATED MACHINE TOOLS & CUTTING TOOLS 1 CNC systems are used in a number of manufacturing processes including machining, forming, and fabrication Forming & fabrication
ROTARY MILLING HEAD #1203
3100 Tremont Ave. Trevose, PA 19053-6694 (215) 322-5507 (800) 321-4163 fax (215) 396-1096 ROTARY MILLING HEAD #1203 PARTS LIST & INSTRUCTION MANUAL Thank you for purchasing a Volstro product. We are pleased
C Cuisine Cart IMPORTANT NOTE
88 9001 001C Cuisine Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken