GENERAL SAW CORPORATION
|
|
|
- Johnathan Parsons
- 5 years ago
- Views:
Transcription
1 GENERL SW ORPORTION Router its and Other Tooling Made in the U.S.. Effective Date: 01/01/ ndalusia oulevard ape oral, Florida Phone: (239) Fax: (239)
2 Plunge arbide Tipped Router its Flutes D Flutes D PL /16" PL /16" 1-3" PL /16" PL " 2- PL /16" PL PL /16" PL PL PL /8" PL PL /8" PL PL PL PL " 4- PL " 2- PL " 4- PL " 2- PL PL " PL /16" 1 - PL /3 1 " 2- PL /16" 1 - PL " 2- PL " 2- PL PL PL " 2- PL PL /16" 1 " 2-1/8" PL /8" PL PL /16" 1 - PL " 2-1/8" PL " 2- PL /16" PL PL PL /8" PL /16" PL / /4" PL PL /16" 1 - PL /16" PL PL " 2- PL " 1 - PL " 2- PL ¼" 1 - PL ¼" 2-3/4" PL ½" 1 - PL " 2- PL /4" 1 - PL PL " 1 - PL PL PL PL " 4" PL PL " 4- PL " 2-3/4" PL PL PL " PL " 2-3/4" PL " 2-3/4" PL ¼" 3" 2
3 STGGER TOOTH arbide Tipped Router its D S T " 2- " S T " S T /8" S T /8" S T " 4- S T SOLID RIDE SPRIL SHER FE Plunge Router its 2 Flutes SPUS SPDS SPUS SPDS SPUS SPDS SPUS SPDS SPUS SPDS SPUS SPDS SPUS SPDS SPUS SPDS SPUS SPDS SPUS SPDS SPUS SPDS SPUS SPDS Shear Direction D U p Shear 1- D own Shear 1- U p Shear D own Shear U p Shear 5 /3 2- D own Shear 5 /3 2- " U p Shear D own Shear U p Shear 2- D own Shear 2- U p Shear 2- D own Shear 2- U p Shear 7 /3 1 " 2- D own Shear 7 /3 1 " 2- U p Shear 2- D own Shear 2- U p Shear 1 " 2- D own Shear 1 " 2- U p Shear 1 " 2- D own Shear 1 " 2- U p Shear 1-3" D own Shear 1-3" U p Shear 2 " 4" D own Shear 2 " 4" 3
4 SOLID RIDE STRIGHT FLUTE Plunge Router its - 2 Flute D S SF " S SF S SF S SF S SF S SF " 2- MORTISING ITS - RIDE TIPPED Router its - 2 Flute D M " M M LOK MORTISING ITS - RIDE TIPPED Screw Type 1/4-28 Thread - 2 Wing M M /16" M M /16" M " M /8" 9/16" M RORS FOR OVE diameter shank diameter shank LOK MORTISING ITS - RIDE TIPPED Screw Type 5/16-24 Thread - 2 Wing M RORS FOR OVE diameter shank diameter shank LOK MORTISING ITS - RIDE TIPPED Screw Type Thread - 2 Wing M /16" M " M
5 FLUSH TRIM ITS - RIDE TIPPED With all earing Guide Flutes FT FT /4" FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT Replacement earings for Dia. its for Dia. its for Dia. its HELIX FLUSH TRIM ITS - RIDE TIPPED With all earing Guide - 2 Flutes D H XFT H XFT Replacement earing = SOLID RIDE SPRIL UP-SHER FLUSH TRIM IT With 2 all earing Guides - 2 Flutes D S SUS " 3" Replacement earing =
6 TEMPLTE FLUSH TRIM ITS - RIDE TIPPED With all earing Guide Flutes TFT TFT /4" TFT TFT /4" TFT /4" TFT /8" 1- TFT /8" Replacement earings for Dia. its for Dia. its for 3/4" Dia. its for 1-1/8" Dia. its OVERHNG TRIM ITS - RIDE TIPPED With all earing Guide - 2 Flutes D E O HT /8" 1/8" O HT /8" 3/16" Replacement earings for 1/8" Overhan g for 3/16" Overhan g FLUSH TRIM V GROOVE ITS - RIDE TIPPED With all earing Guide - 2 Flutes V GFT V GFT Replacement earing = HMFER ITS - RIDE TIPPED With all earing Guide - 2 Flutes - 45 ngle 6 F /16" F /16" F " 13/16" F /16" Replacement earings for 1- Dia. its for + 2- Dia. its
7 EVEL TRIM ITS - RIDE TIPPED 2 Flute evel D T /3 T /3 T /3 T /3 T /8" T /8" EVEL TRIM ITS - RIDE TIPPED with all earing Guide Flutes evel T T T T T Replacement earings for 2 Flute its for 3 Flute its EVEL TRIM UTTER SSEMLY - SOLID RIDE with all earing Guide - 3 Wing - 1/4 Hole evel Repl. rbor T T- 9 T T-1 0 T T- 9 T T-1 0 INLUDED: Solid arbide utter, rbor and all earing Guide Replacement earing for above ssemblies EVEL TRIM UTTERS - SOLID RIDE for ssembly - 3 Wing evel rbor Hole T T
8 EVEL TRIM UTTER SSEMLY - RIDE TIPPED with all earing Guide - 4 Wing - 5/16 Hole evel Repl. rbor T T- 1 T T- 3 T T- 1 T T- 3 INLUDED: Solid arbide utter, rbor and all earing Guide Replacement earing for above ssemblies EVEL TRIM UTTERS - RIDE TIPPED for ssembly - 4 Wing evel rbor Hole T T DOULE EVEL TRIM UTTER SSEMLY RIDE TIPPED with all earing Guide - 4 Wing - 5/16 Hole evel EVEL TRIM UTTERS - RIDE TIPPED for ssembly - 4 Wing Repl. rbor D T T-1 3 D T T-1 3 D T T-1 3 INLUDED: 2 utters, rbor and all earing Guide Replacement earing for above ssemblies T T T T T T Rotation evel rbor Hole R ight Hand 15 L eft Hand 15 R ight Hand 25 L eft Hand 25 R ight Hand 45 L eft Hand 45 8
9 FLUSH TRIM UTTER SSEMLY - SOLID RIDE with all earing Guide - 3 Wing - 1/4 Hole Repl. rbor F T T- 9 F T T-1 0 INLUDED: Solid arbide utter, rbor and all earing Guide Replacement earing for above ssemblies FLUSH TRIM UTTER - SOLID RIDE for ssembly - 3 Wing rbor Hole F T FLUSH TRIM UTTER SSEMLY - RIDE TIPPED with all earing Guide - 4 Wing - 5/16 Hole Repl. rbor F T T- 1 F T T- 3 INLUDED: Solid arbide utter, rbor and all earing Guide Replacement earing for above ssemblies DOULE FLUSH TRIM UTTER SSEMLY RIDE TIPPED with all earing Guide - 4 Wing - 5/16 Hole D FT INLUDED: 2 utters, rbor and all earing Replacement earing for ssembly Replacement rbor for ssembly FLUSH TRIM UTTER - RIDE TIPPED for ssembly - 4 Wing rbor Hole F T
10 ORE OX ITS - RIDE TIPPED 2 Flutes D /16" /16" " " /4" 10 V GROOVING ITS - RIDE TIPPED 90 Included ngle - 2 Flutes D V G V G V G V G V G /8" V G V G V G V G V G V G " 2- V G " 2- V G /4" V G " FINGER PULL ITS - RIDE TIPPED 2 Flutes D F P F P
11 REVERSILE OGEE STILE & RIL SSEMLY RIDE TIPPED - 2 Flutes - for 3/4 Material S RO /4" INLUDED: 2 utters, rbor and all earing OSR SSR Replacement earing for ssembly Replacement rbor for ssembly Replacement Ogee utter for ssembly Replacement Groove utter for ssembly REVERSILE LSSIL STILE & RIL SSEMLY RIDE TIPPED - 2 Flutes - for 3/4 Material S R /4" SR SSR INLUDED: 2 utters, rbor and all earing Replacement earing for ssembly Replacement rbor for ssembly Replacement lassical utter for ssembly Replacement Groove utter for ssembly REVERSILE EVEL STILE & RIL SSEMLY RIDE TIPPED - 2 Flutes - for 3/4 Material S R /4" INLUDED: 2 utters, rbor and all earing SR SSR Replacement earing for ssembly Replacement rbor for ssembly Replacement evel utter for ssembly Replacement Groove utter for ssembly DOOR LIP UTTER SSEMLY RIDE TIPPED - 2 Flutes D L DLRO DLR INLUDED: 2 utters and rbor Replacement rbor for ssembly Replacement Round Over utter for ssembly Replacement Rabbeting utter for ssembly 11
12 PNEL PILOT ITS - RIDE TIPPED 1 Flutes D P P /16" 2- P P " 3-1/8" P P SOLID RIDE FLUSH PNEL PILOT IT 1 Flute D F P SOLID RIDE EVEL PNEL PILOT IT 1 Flute - 7 ngle D P SOLID RIDE PLUNGE UT & FLUSH TRIM IT Pluge - 1 Flute D P FT SOLID RIDE OMINTION FLUSH & EVEL TRIM IT 1 Flute - 7 ngle D FT SOLID RIDE RIP & SLOTTING IT D R S
13 SOLID RIDE ROUND OTTOM VEINING ITS D R V /16" R V /3 R V SOLID RIDE V GROOVING VEINING IT 90 Included ngle D V GV OMINTION FLUSH & EVEL TRIM IT - RIDE TIPPED 2 Flutes D FT OMINTION FLUSH & EVEL TRIM IT - RIDE TIPPED 2 Flutes D FT OMINTION FLUSH & EVEL TRIM IT - RIDE TIPPED 1 Flutes D FT /16" EVEL TRIM ITS - RIDE TIPPED 22 ngle - 2 Flute D T /3 15/16" 13
14 PLUNGE UTTING ROUND OVER ITS RIDE TIPPED 2 Flute EDING ITS w/all earing Guide RIDE TIPPED 2 Flute D a P RO /8" 1/8" P RO " 1/8" P RO /8" 1/8" P RO " 1/8" P RO /8" P RO " P RO " 7 /16" 2-1/8" P RO " 2-1/8" P RO P RO /4" 1 " 2 - P RO " 1-1/8" 2-7/8" RO /16" 5/16" RO /16" 5/16" RO RO RO /3 13/16" RO RO RO " 7/16" RO " 7/16" RO /8" RO /8" RO RO RO /4" RO /4" RO /4" 7/8" RO " RO /8" RO " Replacement earing for eading its 14
15 ROUNDING OVER ITS w/all earing Guide RIDE TIPPED 2 Flute DOVETIL ITS RIDE TIPPED 2 Flute R O /16" 5/16" R O /16" 5/16" R O R O R O /3 13/16" R O R O R O " 7/16" R O " 7/16" R O /8" R O /8" R O R O R O /4" R O /4" R O /16" 1-13/16" R O /4" 7/8" R O " R O /8" R O " 2-1- R O /8" 2-3/4" 1- R O " 1- R O R O Replacement earing for Round Over its Degree D D T D T D T D T /8" D T /4" D T D T D T " 1 " 2-15
16 ULLNOSE RDIUS ITS - RIDE TIPPED 2 Flute Material Thickness N /3 5 /64" 1/8" N /3 5 /64" 1/8" N /3 7 /64" 3/16" N /3 7 /64" 3/16" N /3 9 /64" N /3 9 /64" N /3 13/64" N /3 13/64" N /3 1 " 17/64" N /16" 1-1/8" 11/64" N /16" 1-13/64" 3/4" N /16" 1-17/64" N /16" 1-3/4" 21/3 1- ULLNOSE RDIUS ITS - RIDE TIPPED 2 Flute - with all earing Guide Material Thickness N /3 5 /64" 1/8" N /3 5 /64" 1/8" N /3 7 /64" 3/16" N /3 7 /64" 3/16" N /3 9 /64" N /3 9 /64" N /3 13/64" N /3 13/64" N /3 1 " 17/64" N /16" 1-1/8" 11/64" N /16" 1-13/64" 3/4" N /16" 1-17/64" N /16" 1-3/4" 21/ Replacement earing for ull Nose its 16
17 TRDITIONL EDGE EDING ITS - RIDE TIPPED 2 Flute - with all earing Guide R Dia. D Overall E ead Size T /3 1 - T /3 2 " T /3 1 - T /3 2-1/8" T /3 1-3/4" T / Replacement earing for Edge eading its ROMN OGEE ITS - RIDE TIPPED 2 Flute - with all earing Guide R Dia. R OG /3 1 " 15/3 R OG /3 1 " 15/3 R OG /3 R OG / Replacement earing for Roman Ogee its DOULE ROMN OGEE ITS - RIDE TIPPED 2 Flute - with all earing Guide Dia. D Overall D ROG " D ROG " D ROG /8" D ROG Replacement earing for Roman Ogee its 17
18 OGEE ITS - RIDE TIPPED 2 Flutes Lg. Dia. D Overall a Sm. r O G /8" 1/16" O G /4" 1/16" O G " 3/3 O G /4" 3/3 O G " 9/64" O G /4" 9/64" OGEE ITS - RIDE TIPPED 2 Flutes - with all earing Guide Dia. D Overall O G /8" 1- O G /8" O G /16" O G /16" 2-1/8" Replacement earing for Ogee its 18 OGEE FILLET ITS - RIDE TIPPED 2 Flutes - with all earing Guide Dia. R O GF /16" 3/16" O GF /16" 3/16" O GF /16" Replacement earing for Ogee Fillet its ROUNDING OVER OVE ITS - RIDE TIPPED 2 Flutes - with all earing Guide Dia. D Overall R O /8" 1- R O /8" R O /16" R O /16" 2-1/8" Replacement earing for RoundOver ove its
19 OVE ITS - RIDE TIPPED 2 Flutes - with all earing Guide R Dia. OV /16" OV /16" OV OV OV OV OV OV OV " OV " OV /8" OV /8" OV OV Replacement earing for ove its OVE FILLET ITS - RIDE TIPPED 2 Flutes - with all earing Guide Dia. D Overall D F /8" 1- D F /8" D F D F /8" Dia. D Overall F /8" 1- F /8" F F /8" Replacement earing for ove Fillet its DOULE FILLET OVE ITS - RIDE TIPPED 2 Flutes - with all earing Guide Replacement earing for Dbl. ove Fillet its 19
20 20 LSSIL ITS - RIDE TIPPED 2 Flutes Lg. Dia. D Overall a Sm. r L " 3/3 L /4" 3/3 L /8" 5/3 L /4" 5/3 L " 2-3/4" 15/3 3/16" L " LSSIL ITS - RIDE TIPPED 2 Flutes - with all earing Guide R r L /16" L /16" L /16" L /16" Lg. Replacement earing for lassical its TRDITIONL ITS - RIDE TIPPED 2 Flutes Dia. D Overall a Sm. r T R " 1/16" T R /16" 2-1/16" 3/3 T R /16" 2-3/3 TRDITIONL FILLET ITS - RIDE TIPPED 2 Flutes - with all earing Guide r T RF /8" 9 /16" 5/3 T RF /8" 9 /16"" 5/3 T RF /16" 7/3 T RF /16" 7/3 T RF T RF T RF /4" Replacement earing for Traditional Fillet its
21 WVY EDGE FORM ITS - RIDE TIPPED 2 Flutes - with all earing Guide r W E W E Replacement earing for Wavy Edge Form its RISED PNEL IT - RIDE TIPPED 2 Flutes R P /8" RISED PNEL ITS - RIDE TIPPED 2 Flutes - with all earing Guide R P Replacement earing for Raised Panel OGEE FILLET RISED PNEL ITS - RIDE TIPPED 2 Flutes - with all earing Guide r O GRP Replacement earing for Ogee Fillet Raised Panel it RETING ITS - RIDE TIPPED 2 Flutes - with all earing Guide E Rabbet Depth R T " R T " R T R T * RT R T Replacement earing for Rabbeting its * Replacement earing for Rabbeting it 21
22 LL ERING GUIDES Inside Outside /4" " " /4" /8" RORS for ROUTER UTTERS with Nut and Washer rbor rbor D Overall E /16" 2-1/8" /16" 2 " Thread Size /4" 1-1/ /8" 1/ " 2-1-1/8" " /4" 1-5/ /4" 1-5/ " 1-22
23 2 WING SLOTTING UTTERS - RIDE TIPPED 2-5/16 Hole SSEMLIES UTTERS ONLY Kerf S /16" S " S " S /3 S /8" S /16" S Kerf S /16" S /16" S " S " S " S " S /3 S /3 S S S S S S Included: utter, rbor and all earing Guide 3 WING SLOTTING UTTERS - RIDE TIPPED 2-5/16 Hole UTTERS ONLY Kerf S /16" S /64" S /3 S /8" S /3 S /16" S SSEMLIES Kerf S /16" S /16" S /64" S /64" S /3 S /3 S S S /3 S /3 S S S S Included: utter, rbor and all earing Guide 23
24 4 WING SLOTTING UTTERS - RIDE TIPPED 2-5/16 Hole SSEMLIES UTTERS ONLY Kerf S /16" S " S " S /3 S /8" S /16" S Kerf S /16" S /16" S " S " S " S " S /3 S /3 S S S S S S Included: utter, rbor and all earing Guide For Pricing Please all: GENERL SW ORPORTION 2518 ndalusia oulevard ape oral, FL Local: (239) Toll-Free(800)
CALL TOLL FREE TO ORDER 1 (800) D B. A. Overall Diameter. Price 84600M. 15/64" 3/4" 1/4" 2" 1/4" plywood $21.24
LL TOLL R TO ORR 1 (800) 288-7483 253 OSH Straight/Mortising Router its Solid arbide ouble-lute Straight its Micrograin bits provide exceptional smoothness of cut and balanced cutting with minimal vibration.
Router Bits. Router Bits. WoodPecker. Router Bits. Router Bits. Straight Bits 1/4 Shank, 2 Flutes. Rail & Stile - Raised Panel Door Set, 3 Pcs
Rail & Stile - Raised Panel oor Set, 3 Pcs Premium industrial quality, suitable for working in natural woods and man made materials (MF). Unique cutting angles and chip limiter body ensures safe, clean
Router Bits. Router Bits. Router Bits. Router Bits. Dovetail Bit. Glue Joint Bit, 2 Flutes. 45º Lock Mitre Joint Bits, 2 Flutes. Butterfly Spline Bit
outer its ovetail it Tool no ia Shank a Length 1044-12 1/2" 1/4" 1/2" 14º 2 1/4" outer its Glue Joint it, 2 Flutes Tool no ia Shank a Length 1494-25 1" 1/4" 3/4" 14º 2 1/4" Template all earing -12 Lock
DESCRIPTION. Display cabinets with: 240 HW router bits (S=Ø8mm), 60 spare parts (saw blades at your choice)
Display cabinets This sturdy structure is hand-crafted using wood, tempered glass and iron and is free-standing to offer 360 visibility and to give you the versatility of positioning the display anywhere
Carbide-Tipped Bowl & Tray Bits
Carbide-Tipped Bowl & Tray Bits SE / ShAnK Radius SE0 / / / -/ SE / / / -/ SE / / -/ SEB / / / -/ SBE0 bearing Radius SE / / / -/ SE -/ / / -/ SEB -/ / / -/ Bearing supplied on shank for template routing.
SAVE On All Saw Blades! For the Best Tools at Great Prices Choose Razor Tools & Jesada Router Bits! 40% Off Jesada Saw Blades!
SVE! SVE On ll Saw lades! For the est Tools at Great Prices hoose Razor Tools & Jesada Router its! atalog #4 Price $2.00 40% Off Jesada Saw lades! 50 TEETH Maxi-ombo lade #110-500 MX. RP M 5/8" ROR : $46.
Ten Essential. These bits will conquer the majority of woodworking tasks. b y G a r y R o g o w s k i. Operating: handheld vs.
Ten Essential Router Bits These bits will conquer the majority of woodworking tasks b y G a r y R o g o w s k i You ve bought a new router, unpacked it, and even found the switch on it. But that s only
Edge Treatment & Grooving Bits
Multi-Profile Bits Thick carbide tips and a sturdy 1 2 shank allow you to produce countless moulding profiles. Produce an endless number of profile designs by varying the height and fence settings and
Display cabinets. Saw blades. & Knives. Tools with bore. Router Bits & Sets. CNC Router Cutter & Chucks. Industrial.
Display cabinets This sturdy structure is hand-crafted using wood, tempered glass and iron and is free-standing to offer 360 visibility and to give you the versatility of positioning the display anywhere
TCT CARBIDE ROUTER BITS
PRMIUM MIRO-GRIN RI TIPS provide a stronger, sharper cutting edge, reducing wear for a longer tool life. arbide tips are INUTION RZ with silver solder for a strong bond, then precision ground and balanced
ROUTER BITS. Rabbeting Bits. Rabbeting Bits with Bearing Set Comes with interchangeable bearings to cut rabbets of different depths.
32-098 ROUTER BITS 42 32-504 Rabbeting Bits Produces super smooth cuts on both surfaces of the rabbet. Can be used for joining boards and for letting in back panels. Steel pilots can be removed from bits
Spokane Hardware Supply, Inc.
Decorative Hardware Hinges Router Bits Cabinet Organizers Furniture Components STRAIGHT BITS, CARBIDE TIPPED - SINGLE, PLUNGE CUT Optimum chip clearance. Specially designed tip for fast plunge cutting.
HICKORY SAW & TOOL, INC.
HICKORY SAW & TOOL, INC. 406 9 th Street S.E., Hickory, N.C. 28602 P.O. Box 2407, Hickory, N.C. 28603 Telephone: (828) 324-5585 1-800-762-9899 Fax: (828) 324-5588 1-800-762-6845 www.hickorysawandtool.com
drill press Table The tables that come with most A large worksurface adjustable fence 10 ShopNotes No. 57
Drill Press Table large worksurface and adjustable fence make this an outstanding drill press The tables that come with most drill presses might be fine for metalworking. But for woodworking, they just
Router bit cabinet August Home Publishing Co.
Router bit cabinet 2011 ugust Home Publishing Co. Feature Project Router Bit Cabinet Dovetail keys at the corners reinforce the joints to make a stronger cabinet. Plus, a clear, plastic door panel lets
Greene & Greene. Mailbox. by Seth Keller. Signature details create an elegant box. 2 AmericanWoodworker.com
Greene & Greene Mailbox by Seth Keller Signature details create an elegant box. 2 AmericanWoodworker.com We needed a new mailbox, but I couldn t find an off-the-shelf version that I liked. So I decided
Futon Coffee Table. Double-Duty
OWNLOL PROT PLNS ROM TH ITORS O WOO MGZIN http://www.woodmagazine.com ouble-uty uton offee Table Whether or not you ve built the previously published pieces in our futon set, you ll enjoy making and using
Router Bits ROUTER BIT 101. CMT NEW Products. FOREST CITY ROUTER BITS Straight Router Bits Router Blanks
U.S Toll Free: 1 800-TOOLING (866-5464) 1 (828) 628-4414 Fax: 1 (828) 628-4490 165 Router Bits ROUTER BIT 101 NEW Products FOREST CITY ROUTER BITS Straight Router Bits Router Blanks & FREUD ROUTER BITS
WHITESIDE MACHINE. Carbide Tipped. Router Bits. Drills. Hole Saws HOLE SAWS. More! MADE IN THE USA CT STRAIGHTS SOLID CARBIDES SPIRALS
WHITESIDE MACHINE Router Bits Carbide Tipped Drills CT STRAIGHTS SOLID CARBIDES SPIRALS FORM BITS THREE WING DRILLS Hole Saws HOLE SAWS MADE IN THE USA & More! ESTABLISHED IN 1970 CATALOG #48 About the
Hinge Mortising Jig. One of the make it or break it parts of building a. 6 ShopNotes No. 74
Hinge Mortising Jig A Mortise for a Hinge. Quick, clean, and accurate that s the only way to describe the mortise you get with a trim router and this hinge mortising jig. One of the make it or break it
CRAFTPRO ROUTER CUTTERS
FTPO OUTE UTTES FTPO OUTE UTTES TT IE TIPPE STIGHT FLUTE & KITHEN FITTES PKS 87-89 ETES & POFILES 90 TIMMES 91 HMFE 92-93 OVETIL & OWEL ILLS 93-94 IUS & VETTO 95 SPEILLY ESIGNE PTFE OTE TT TOING TO MEET
33/3547A. Special tools needed: #10-24 tap Drill bits: #25, 5/16, 13/32, 1/2
911404-00 Concealed Vertical Rod Exit Device 33/3547A Installation Instructions Devices covered by these instructions: 33/3547A and 33/3548A Concealed Vertical Rod Exit Device 33/3547A-F and 33/3548A-F
33/35A Series. Devices covered by these instructions: Rim Exit Device. CD33/35A Rim Exit Device EL33/35A Rim Exit Device SS33/35A Rim Exit Device
911402-00 Rim Exit Device 33/35A Series Installation Instructions Devices covered by these instructions: 33/35A Rim Exit Device CD33/35A Rim Exit Device EL33/35A Rim Exit Device SS33/35A Rim Exit Device
WOODStore.net. Thank You! Adobe Acrobat Reader Troubleshooting Guide. WOOD Store. Browse more than 800 plans, projects, books, techniques, & more
WOODStore.net rowse more than 800 plans, projects, books, techniques, & more Thank You! WOOD Store Customer Favorites Shop Tools & Accessories Thank you for ordering a WOOD magazine download. We hope you
Popular Woodworking Magazine. Router Fence for a Table Saw. (1 of 7)02/09/
Router Fence for a Table Saw http://www.popularwoodworking.com/features/fea19.html (1 of 7)02/09/2005 11.15.18 Your table saw is a router table and jointer just waiting to happen. Replace one of the saw's
The Nantucket Legacy Arbor
SSEMLY INSTRUTIONS The Nantucket Legacy rbor Please read through before starting assembly. IMPORTNT: HEK THE INSIDE OF YOUR POSTS FOR LL MTERILS. heck ox for These ontents In. the Keystone event of missing
33/3527A. Devices covered by these instructions: 33/3527A-F (Fire) Surface Vertical Rod Exit Device
*911403-00* 911403-00 Surface Vertical Rod Exit Device 33/3527A Installation Instructions Devices covered by these instructions: 33/3527A Surface Vertical Rod Exit Device 33/3527A-F (Fire) Surface Vertical
INSTALLATION INSTRUCTIONS VENETIAN 84" SLIDING SHOWER DOOR SYSTEM (180º INSTALLATION)
INSTALLATION INSTRUCTIONS VENETIAN 84" SLIDING SHOWER DO SYSTEM (180º INSTALLATION) 28539 Industry Drive, Valencia, CA 91355 Toll Free Phone: (877) 728-3874 Toll Free Fax: (888) 440-9567 Phone: (661) 775-1675
Project 13586EZ: Writing Desk. Writing Desk Materials List
Project 13586EZ: Writing Desk This writing desk will make a handsome addition to just about any room in the house. The one shown is made of cherry, a logical choice for a piece like this, but mahogany
tel fax
distributed by : Newman Tools Inc. Tel 1-800-465-1384 Fax 1-800-605-2442 Tel 613-836-6776 Fax 613-836-9070 www.newmantools.com thread mills - product overview Thread Mills cut a thread using helical interpolation.
KEO Cutters a name you can trust!
KEO utters a name you can trust! The world of cutting tools is changing every day. KEO utters is getting better every day as we implement and execute our continuous improvement strategies. This new catalog
Tools for the toughest demands. Overview of router bits. A handy guide
Tools for the toughest demands Overview of router bits A handy guide Festool router bit selection This guide provides information on the extensive selection of Festool router bits. You will find bits for
ECONOMY FINGER JOINT BIT. Model:601 SERIES FEATURES: Specification: Item No. A B C D /8 1-1/2 1/2 1-1/2 FINGER JOINT BITS.
ECONOMY FINGER JOINT BIT Model:601 SERIES Make professional finger joints with this bit. This bit can be used for jointing wood edge to edge or end to end. The actual joint produced with this bit is stronger
Catalog 2014/2015. The Perfect 10! Rated the #1 Overall Router Bits
Catalog 2014/2015 aw blades & knives s ndustrial pare parts isplay cabinets WOO CHOCE R O U T E R Magazine The Perfect 10! Rated the #1 Overall Router Bits B T Welcome to the 2014/2015 catalog ear customer,
custom Window Makeover Before After From Workbench magazine August Home Publishing Company All rights reserved
custom Window Makeover efore After page of 10 Windows should be something more than just an interruption in the wall. They should be part of the wall: an architectural component and an integral part of
Installation and Assembly: Projector Enclosure
Installation and ssembly: Projector Enclosure Models: PE 1120, PE 1120-W 3215 W. North ve. Melrose Park, IL 60160 (800) 729-0307 or (708) 865-8870 Fax: (708) 865-2941 www.peerlessmounts.com ISSUED: 07-11-06
Molding. The molder head (Figure 5-1) is a heavy steel disc that is mounted on the 5/8" molder/dado arbor, then onto the Mark V s main spindle.
Molding Molding operations are performed with the Mark V in the table saw mode. The molder head accessory enables you to add professional detail to almost any project. With it you can shape edges and surfaces,
L u m b e r M e l a m i n e H a r d w o o d P l y w o o d A r c h i t e c t u r a l P a n e l s C o l o r e d C a u l k P a r t i c l e B o a r d E
L u m b e r M e l a m i n e H a r d w o o d P l y w o o d A r c h i t e c t u r a l P a n e l s C o l o r e d C a u l k P a r t i c l e B o a r d E MISCELLANEOUS x o t i c L u m b e r M D F V e n e e r
ED5200(A) Series Rim Exit Devices
ED5200() Series Rim Exit Devices Installation Instructions (Single Doors or Pairs with Mullion) FM156 08/11 For Metal, omposite and Wood Doors of Either Hand End lamp (3) 8-32 x 5/16" Flat Head, Undercut
DOWNLOADABLE PROJECT PLANS FROM THE EDITORS OF WOOD MAGAZINE DRILL-PRESS TABLE page 1 of 6
OWNLOL PROJT PLNS FROM TH ITORS OF WOO MGZIN http://www.woodmagazine.com RILL-PRSS TL page 1 of 6 Start with the horizontal table pieces 1 ut the horizontal table () to the size listed in the ill of Materials.
NUMBER OF HORIZONTALS REQUIRED FOR 2 ON CENTER SPACING.
K WIK FRAME ASSEMBLY INSTRUCTIONS NUMBER OF HORIZONTALS REQUIRED FOR 2 ON CENTER SPACING. APPROXIMATE DOOR LEAF WEIGHT (LBS.) WITH 29 GAUGE STEEL PANEL ALL PACK AGES INCLUDE #235 STEEL GIRT 2 FT. ON CENTER
Panel Installation Instructions (Revised 2/26/10) (Page 1 of 7)
Panel Installation Instructions (Revised /6/0) (Page of 7) Remove Hanger Frame Topcap by depressing tabs inside top slot of hanger frame and lifting up. Hold panel flush and in a STRIGHT LINE (80 degrees
Contoured keepsake box
Contoured keepsake box 2012 ugust Home Publishing Co. Designer Series Project contoured Keepsake ox reat-looking veneer and hardwood plus a few interesting woodworking techniques add up to a memorable
ribbon handle box 2010 August Home Publishing Co.
ribbon handle box 00 ugust Home Publishing Co. eature Project Ribbon Handle ox This imaginative design not only makes a wonderful gift, it s also a great way to build your woodworking skills. Ithink of
We have ogee profiles to suit just about any
Ogee s 640-270 640-770 646-325 646-825 22 640-350 640-850 646-325 646-825 with purchase of Ogee onversion Kit In every shape and style! We have ogee profiles to suit just about any decorative need. hoose
Slot Cutters. Slot Cutter Arbors. without arbor 822 CARBIDE TIPPED. the only ORANGE one. pag /1/99 1:22 PM Page 28
pag 28-47 4/1/99 1:22 PM Page 28 Slot Cutters without arbor 822 CARBE TPPE These three wing carbide tipped CMT Slot Cutters feature anti-kickback three wing blade design and CMT trademark orange Teflon
2016/2017 THE WIDEST TOOLING RANGE. Catalogue. Overall Rating 10! Top Performing Router Bits. English edition. Jig Saw Blades. Tools for Multi-Cutters
abre & ets Cutters & Chucks ndustrial owel rills aws Accessories Catalogue English edition 2016/2017 THE WET TOONG RANGE Overall Rating 10! Top Performing 1994 Welcome to the 2016/2017 catalogue ear Customer,
Instructions for Prepping an Opening for SOSS Invisible Hinges
Instructions for Prepping an Opening for SOSS Invisible Hinges IMPORTANT Use only Porter-Cable Template Guide Bushing #42024 (Lock Face Routing) and #42237 (Lock Nut) to assure the following guide bushing
ZeroPlay Guide Bar Jig Plans (V2.0) Micro Jig, Inc. PO Box Winter Springs, FL USA
Z2 ZeroPlay Guide Bar Jig Plans (V2.0) 0409 Micro Jig, Inc. PO Box 195607 Winter Springs, FL 32719 USA Tel: 1-407-696-6695 Web site: www.microjig.com Email: sales@microjig.com Copyright 2009 Micro Jig,
ULTIMATE ROUTER TABLE PLANS. By Dan Phalen
ULTIMATE ROUTER TABLE PLANS By Dan Phalen January 2017 Ultimate Router Table Plans. Copyright 2012-2017 by Daniel Phalen. Published by Creston Hall Publishing Company. All rights reserved. No part of this
comprehensive training on-site trouble shooting custom tool design factory technical support
comprehensive training Increased productivity equals lower cost, improved profitability, and ultimately, survival of your business in today s competitive environment. The LMT Onsrud Team will work with
DOOR STOP V STILE U GLASS STOP. %/8" brad
DOO DEIL eveled glass 4 DOO Hinge NOE: tiles and rails are made from "-thick stock NOE: ee hop Notebook on page 9 for more on making bead molding and glass stop!/ IDE ECION 8!/8 FON ECION "-thick stop!/"are-earth
Thank you! Bill Krier Editor WOOD magazine
www.woodonline.com Thank you! Thank you for ordering a ownloadable WOO PLN. We hope you enjoy being a part of this new online experience and that you have fun building your woodworking project. Please
APPLICATION REFERENCE
O.D./I.D. S Insert Shown in Right Hand Toolholder D THINIT LGI093D2.240" +.0 -.0 FRONT RKE: RIDE: Primary 10 honed, Secondary 15 HIGH SPEED STEEL: 15 K LERNE: 2-1/2 both sides SIDE LERNE: 0 both sides
SSRLS-3 / SSRLU-3 Installation Instructions
5mm Hex Nut Upper Telescoping hannel & Screws Packing List QTY. ITM 1 Top Telescoping hannel 1 ottom Telescoping hannel w/ self drilling screw 15" 18" 1 Top and ottom Rod with connecting arm 25-½ 2 ¼ -
CIRRUS AIRPLANE MAINTENANCE MANUAL
FASTENER AND HARDWARE GENERAL REQUIREMENTS 1. DESCRIPTION This section contains general requirements for common hardware installation. Covered are selection and installation of cotter pins, installation
Routers. Tools and Accessories. Section Guide
Tools and ccessories Section Guide Tools ixed ase... 112-115 Modular... 112-113 Palm... 114 Plunge... 112-116 ccessories Palm ccessories... 117 Router ccessories... 118-122 Table/Table ccessories... 119
CNC router cutters & chucks
CNC router cutters & chucks Products Page Universal assembly supports for chucks 176 CNC chucks 176~180 Precision collets 180-181 Cutter arbor 182-183 MK2 chucks 183 olid carbide spiral bits 184~190 CNC
The WoodWorker s Edge
The WoodWorker s Edge Draw-leaf Game Table 1. 2. Layout the area for the tenons. The tenons are 3/8 thick x 4-1/2 long x 1-1/4 deep and offset to the inside. Create the tenons using the step method to
ROUTER BITS. Tooling Group Straight Bits. Insert Roundover Bits 2-7. Spiral Solid Carbide Bits. Insert Rabbeting Bits 2-8
ROUTER BITS Tooling Group 2 Straight Bits 2-2 Insert Roundover Bits 2-7 Spiral Solid Carbide Bits 2-3 Insert Rabbeting Bits 2-8 Insert Straigh Bits 1 flute 2-4 Dovetail Bits 2-9 Insert Plunging Straight
DIY Full-Size Captain s Bed with Storage. Addicted2DIY.com
DIY Full-Size Captain s Bed with Storage Addicted2DIY.com Before beginning this project Please read through all of the plans as well as the blog post associated with this project. Always use safety precautions
The Genius Sierra retractable screen features a fully assembled screen cassette pre-sized for
IT IS IGLY REOENDED TT TE INSTRUTIONS E RED TROUG EFORE INSTLLTION. RETRTLE SREEN DOOR SIERR 100 SINGLE DOOR installation instructions INSTLLTION TOOLS Phillips Screwdriver measuring tape and-eld or Power
PRAZI USA. Model PR-3900 Owners Manual. Please read this manual in its entirety before using the PRAZI ChestMate.
PRAZI USA Model PR-3900 Owners Manual Please read this manual in its entirety before using the PRAZI ChestMate. PRAZI USA 214 Rear South Meadow Rd (800)-262-0211 Plymouth MA, 02360 www.praziusa.com ChestMate
WOODWORKING PCD CUTTING TOOLS
WOODWORKING PCD CUTTING TOOLS Page A 2-3 4-5 6 7 8 9 11 13 14 15 17 Contents Telcon s Profile Straight Routers Z= Routers Z=2+2 Routers Z=3 Straight Edge Router Hinge Boring Bit Throuth Hole Drill T-Slot
Next-Generation Router Table
Next-Generation Router Table Make more accurate cuts with a flat, solid-surface top. by John English 2 AmericanWoodworker.com 9 Key Features 1. Hinged Top. Bit changes are much easier. 2. Pivot Control.
790XL Dado Jig Owners Manual Please Read Carefully!
790XL Dado Jig Owners Manual Please Read Carefully! 790XL Dado Jig Hardware List: Identify and verify that you have all of the hardware shown below prior to assembly. Tools needed for assembly: #2 & 3
Mortisting Stand. Premium Plan. In this plan you ll find: America s leading woodworking authority
America s leading woodworking authority Premium Plan In this plan you ll find: Mortisting Stand Step-by-step construction instruction. A complete bill of materials. Construction drawings and related photos.
788XL Dado Jig Owners Manual Please Read Carefully!
788XL Dado Jig Owners Manual Please Read Carefully! 788XL Dado Jig Hardware List: Identify and verify that you have all of the hardware shown below prior to assembly. Tools needed for assembly: #2 & 3
APPLICATION REFERENCE
O.D./I.D. GROOVING INSERTS Insert Shown in D THINIT LGI093D2.240" +.0 -.0 FRONT RKE: RIDE: Primary 10 honed, Secondary 15 HIGH SPEED STEEL: 15 K LERNE: 2-1/2 both sides SIDE LERNE: 0 both sides RDIUS:
Type A Type B Type C Type D
plywood plywood plywood plywood Type Type Type Type D Note: Type and cutout are flush with frame Type and D cutout are offset to accommodate French Door with trim around the glass. Type E and F (not shown
router table sled 2012 August Home Publishing Co.
router table sled 2012 August Home Publishing Co. best-built jigs & fixtures router Table Sled Packed with features, this sled makes it easy to rout perfect-fitting joints. A router table is a great tool
46 Edge & Surface Treatments
1 A Router primer Edge & Surface Treatments by Nick Engler Routers were developed to cut moulded shapes in wood. Although their workshop role has expanded (greatly) during the last century to include joinery
Installation Instructions
VON DUPRIN Installation Instructions 98/9947WDC Concealed Vertical Rod Exit Device Wood Door Applications Devices covered by these instructions: 98/9947WDC Concealed Vertical Rod Device 98/9947WDC-F (Fire)
Folding Chair. Sitting-Pretty. Who says you can t make a great concept
DOWNLODLE PROJET PLNS FROM THE EDITORS OF WOOD MGZINE Sitting-Pretty http://www.woodmagazine.com Folding hair Who says you can t make a great concept even better? raftsmen have been incorporating the folding-leg
INCRA. Systems Configurations Shop Stop Safety Operation Getting Acquainted Applications Setup...
INCRA INCRA S PATENTED LEAD SCREW TECHNOLOGY FOR THE ULTIMATE IN PRECISION WOODWORKING CAPABILITY Owner s Manual Contents Please read this owner s manual and keep it at hand for reference. From typical
Small Block Ford. 289 / 302 / 351W / 5.0 Installation Manual For Systems without A/C #13605 / #13625
Small lock Ford 289 / 302 / 351W / 5.0 Installation Manual For Systems without /C #13605 / #13625 illet Specialties, Inc. 500 Shawmut venue. La Grange, Illinois 60526 Tech Line (708) 588-0505 Fax (708)
Project 11355EZ: Wall Cabinet with Louvered Doors and Shelf
Project 11355EZ: Wall Cabinet with Louvered Doors and Shelf This Early American style cabinet will look good in any room, although it seems particularly well suited for the kitchen or bathroom. To make
Biesemeyer fi T-Square fi Commercial Fence Systems 50 Capacity (Model ) 30 Capacity (Model ) INSTRUCTION MANUAL
iesemeyer fi T-Square fi Commercial Fence Systems 50 Capacity (Model 78-904) 30 Capacity (Model 78-907) INSTRUCTION MNUL D T E D 3-5-96 P RT NO. 1349984 'Delta International Machinery Corp. 1996 INTRODUCTION
/4 7/8 1/4 2 1/ /16 7/8 3/ /8 1 1/4 3/ /2 1 1/4 1/2 3
MADEINTHE USA Upcut - Series 800 Downcut - Series 900 Series 800 & 900 Single Flute Finishing Spirals Single edge tools are used when slower feed rates (100-300 inches per minute) are mandated by the application.
CHAPTER 10 3/8" Box Joints
43 RTJ400 OPERTION HPTER 10 ox Joints ox Joints Half-lind ox Joints IMPORTNT SFETY NOTE efore using your Leigh RTJ400 you must have completed the preparatory steps listed in the previous pages, including
CLARK 5-SHELF BOOKCASE
LRK 5-SHELF OOKSE MODEL N0. 06-70-2 SSEMLY INSTRUTIONS IMPORTNT: Please read and understand this manual before any assembly. efore beginning assembly of product, make sure all parts are present. ompare
Spindle Tooling. Wobble Saw. RT Adjustable Grooving Rabbeting Cutterhead. 150 Spindle Tooling WOBBLE SAW AG00701
Spindle Tooling Wobble Saw WOBBLE SAW RT Adjustable Grooving Rabbeting Cutterhead AG00701 Titman s Wobble Saw is the traditional answer to the problem of cutting various widths of grooves in timber, chipboard
OPERATOR'S MANUAL RULES FOR SAFE OPERATION
OPERATOR'S MANUAL #4950300 ROUTER AND JIG SAW MOUNTING KIT (FOR USE WITH THE BT3000 TABLE SAW) CONGRATULATIONS AND THANK YOU FOR BUYING THIS RYOBI ROUTER AND JIG SAW MOUNTING KIT. Your new #4950300 Router
BUTCHER BLOCK MICROWAVE OVEN STAND
BUTCHER BLOCK MICROWAVE OVEN STAND 828 The butcher block has fallen out of favor in recent years, replaced by the countertop cutting board in an attempt to save space. This design, however, makes the butcher
Thank you! Bill Krier Editor WOOD magazine
www.woodonline.com Thank you! Thank you for ordering a ownloadable WOO PLN. We hope you enjoy being a part of this new online experience and that you have fun building your woodworking project. Please
x2 1/4 (6mm) Floor Anchor
INSTALLATION GUIDE Main Components x1 Rail x5 Wall Spacer x2 Anti-jump Block x2 Straight Strap x1 Right Stopper x1 Left Stopper x5 5/16 (8mm x 60mm) Carriage Bolt x5 5/16 (8mm x25mm) Anchor x5 5/16 (8mm
8800 Series Mortise Lockset Knob, Lever, Reflections and Security Trims Installation Instructions
8800 Series Mortise Lockset Knob, Lever, Reflections and Security Trims Installation Instructions IMPORTNT: The accuracy of the door preparation is critical for the proper functioning and security of this
4 BAY Low Profile-Dual Displays WALL MOUNT CABINET
D1/347M2 SSEMLY INSTRUTIONS 4 Y Low Profile-Dual Displays WLL MOUNT INET TIP HZRD WRNING! abinet must be affixed to wall. For use with video monitors weighing 175lbs (80kg) or less. Use with heavier televisions
4600 Series Rim Narrow Stile Exit Device Installation Instructions I-ED01162
DEVICES COVERED IN THIS DOCUMENT: 4600 Series Rim Panic Narrow Stile Exit Device 4600 Series Rim Fire Narrow Stile Exit Device OVERVIEW Outside of Door RHR LHR Inside of Door APPLICATIONS 4950 BLADE STOP
WOOD DOOR INSTALLATION
1825 VIA BURTON ANAHEIM CA 92806 714-772-5202 / FAX 714-772-2302 EMAIL: MAIL@MAJORMFG.COM WEB: WWW.MAJORMFG.COM INSTRUCTIONS FOR HIT-32VD9W TEMPLATE FOR VON DUPRIN 99 RIM WOOD DOOR INSTALLATION WHEN USING
Classic Mitered Jewelry Box
America s leading woodworking authority Premium Plan In this plan you ll find: Step-by-step construction instruction. A complete bill of materials. Construction drawings and related photos. Tips to help
Bits for hand power tools
Bits for hand power tools Products Page Adaptors 232-233 nterchangeable boring bits 233 Boring bits 234~237 Mortise chisel & bit set 237 Plug cutters & ets 238-239 Forstner bits 240-241 Brad point bits
No. 059FL. No. 251FL. No. 260FL. No. 305RE. Etruscan Bronze. Florentine Brass. Siena Brass (D) All designs available in these finishes.
SINCE 1964 No. 059FL No. 251FL No. 260FL No. 305RE 2 Etruscan Bronze (ETR) Florentine Brass (D) Siena Brass (BAS) Venetian Nickel (BPS) All designs available in these finishes. No. 309RE No. 331FL No.
Kreg Tool Co. All Rights Reserved.
Version 1 p. 1 Materials: Lumber: Qty: Board 2 2x2s 3 ft. long 2 1x2s 8 ft. long 2 1x3s 8 ft. long 6 1x6s 10 ft. long INSTRUCTIONS: Supplies: 1 1 / 4" Kreg Screws (coarse thread for softwoods, fine thread
11-00 Single & Double Flute - High Speed Steel O Flute Straight
LMT Onsrud has been TAKING ON challenging materials for over 70 years. As materials have changed so has LMT Onsrud s geometry and product diversification. We take pride in manufacturing tooling for CNC
Pivot-Door Downdraft Cabinet Plans
Pivot-Door Downdraft Cabinet Plans Finished Cabinet Closed Open Exploded View Introduction This simple downdraft-style dust collection cabinet is a great way to keep your shop cleaner and keep your router
Agricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
TOGGLE CLAMPS. Holding Pressure Competitor Conversion Index General Information
Holding Pressure Competitor Conversion Index... 124 General Information... 124 Hold Down Action Vertical Handle... 125-129 Horizontal Handle... 130-132 Toggle Pliers... 133-134 Straight Line Action...
Ultimate Crosscut sled
Ultimate Crosscut sled Achieve the accuracy of a sliding tablesaw for a fraction of the price BY JOHN M C CORMACK with a bit of support at the outfeed end, most tablesaws excel at ripping whether wide
Packing List MODEL TEL-IAL-481 For Inactive Leaf TRIDENT double door
Items: SECURITECH GROUP, INC. MP uxiliary POLICE LOCK Packing List MODEL TEL-IL-481 For Inactive Leaf TRIDENT double door Items with * are pre-installed or assembled Fasteners: Part# Qty Name Description/Usage