The Genius Sierra retractable screen features a fully assembled screen cassette pre-sized for

Size: px
Start display at page:

Download "The Genius Sierra retractable screen features a fully assembled screen cassette pre-sized for"

Transcription

1 IT IS IGLY REOENDED TT TE INSTRUTIONS E RED TROUG EFORE INSTLLTION. RETRTLE SREEN DOOR SIERR 100 SINGLE DOOR installation instructions INSTLLTION TOOLS Phillips Screwdriver measuring tape and-eld or Power Saw power drill & its Use saw blade suitable for cutting aluminum. Introduction The Genius Sierra retractable screen features a fully assembled screen cassette pre-sized for opening sizes indicated on the packaging box. If the door opening is shorter than this product, contact Genius for help with another product. The instructions are split into two sections: Recess Installation, Page 2, and Surface Installation, PGE 9. Determine which you need before starting. Please contact your Genius Dealer for additional custom sizes and colors. Genius SIERR 100 Instructions part number : V.08.12

2 sierra 100 REESS INSTLLTION PGE 2 PRT DESIGNTIONS Screen assette ssembly J ottom Guide Rail Top Guide Rail I S D Dual-ount Side Rail with agnet R Q E F Threshold Transition Threshold Transition End aps P D G andle oot ody K R G I J K oot ody End ap #6 x 3/4"(19mm) Phillips Flathead ountersunk Screws for oot ody End ap Recess ount lips #8 x 3/4 (19mm) Phillips Panhead Screws P Pile Weather Strip K R Q Top Retainer Guide (can be installed on outer or inner side.) R Rubber umpers F S Optional Top Guide Rail End ap E F

3 sierra 100 installtion instructions PGE 3 REESS INSTLLTION 1 inside ounting The -Screen assette will be mounted using K-Recess ounting lips the door frame. 1- Recess Installation Door K Jamb K rickmold 2 width easuring easure the opening width and height in several places and record the smallest and height measurement. Recess Installation Record Width (W) W ead eight () Sill

4 sierra 100 installtion instructions PGE 4 REESS INSTLLTION I The Screen assette The -Screen assette ssembly can be installed on either the right or left side of the door jamb by flipping the Screen assette (the rounded side of the Screen assette should face outward). Determine which will be top of the -oot ody [3.1] and attach the I-oot ody End ap on the desired top end using three (3) J-#6 x 3/4 (19mm) Phillips Flathead ountersunk Screws. Slide the -oot ody onto what will be the top end of the -Screen assette ssembly [3.2]. I 3.2 Install the Q-Top Retainer Guide [3.3] by sliding it onto the top of the Pull ar (interior side). For now move the Q-Top Retainer Guide down about 6. It will be further adjusted in step Q

5 sierra 100 installtion instructions PGE 5 REESS INSTLLTION 4.1 K-lips for Recess Install 4 Installing the assette Using the -#8 x 3/4 (19mm) Phillips Panhead Screws, install the K-Recess ounting lips 16 from the top and bottom of the door opening [4.1]. Lock the Screen assette onto the mounting clips [4.2]. 4.2 Recess Installation Insert into clip flange here. Snap into clip notch here. assette VIEW FRO OVE 5 ut the Top and ottom Rails Using the measurements from Step 2, Subtract 2-1/2 (63mm) from the top guide Subtract 2-1/4 (57mm) from the bottom guide S Note: Your screen comes with an optional S-Top Guide Rail End ap. This End ap may be used if the depth of the door frame trim does not fully cover the ends of the -Top Guide Rail at the end opposite of the -Screen assette. If you choose to use this End ap then deduct an 1/8 (3mm) from the Top Guide before cutting. On the end of the -Top Guide Rail where you will be installing the S-Top Guide End ap, trim away an additional 5/16 (8mm) of the Top Guide Rail Weather Strips before crimping the pile as shown in Step 6. ut the rails to size. If using the S-Top Guide Rail End ap, install now as shown at left. 6 Rail crimp weather strips rimp in the upraised channel lip on the inside of each corner of the -Top Guide to keep the P-Pile/Weather Strip from moving, as shown at left.

6 sierra 100 installtion instructions PGE 6 REESS INSTLLTION Installing the Top and ottom Guide Rails Slide the -ottom Guide Rail fully onto the tab on the -Screen assette End ap [7.1]. Slide the -oot ody upward on the Screen assette until it rests snug with the top of the door opening [7.2]. Position the -Top Guide Rail onto the tab of the -oot ody [7.3]

7 sierra 100 installtion instructions PGE 7 REESS INSTLLTION D 8.1 Slide -ottom Guide Rail inside the flanges of D-Side Rail. Note that the front of -ottom Guide Rail has indented grooves and the the front flange of the D-Side Rail is shorter than the back. 8 Position Side RIL WIT GNET ngle the D-Side Rail with agnet behind and over the -ottom Guide Rail, so that the -ottom Rail is positioned inside the flanges of the D-Side Rail [8.1]. onversely, at the top, the D-Side Rail fits inside the flanges of the -Top Guide Rail [8.2]. Position the D-Side Rail flat against the vertical jamb. 8.2 D 8.3 F E Profiles of ottom Guide Rail and Threshold Transition optional threshold transition for recess mount only efore screwing down the -ottom Guide Rail, you may choose to install the E-Threshold Transition (with F-Threshold Transition End aps) [8.3]. This part is optional; it protects the bottom guide rail and it is also a nice aesthetic feature. The Transition may be installed toward the interior or exterior of the home. To install, cut the Transition to the door opening width, less 4-1/4 (114mm) for Single Door Screens. Insert the F-Threshold Transition End aps, slide the lip of the Transition under the ottom Guide Rail and secure both profiles with three (3) -#8 x 3/4 (19mm) Phillips Panhead Screws. Position screws 6 inches in from each end and center the middle one.

8 sierra 100 installtion instructions PGE 8 REESS INSTLLTION 9 Secure The Rails With Screws Secure the -ottom Guide Rail, -Top Guide Rail and D-Side Rail with agnet with three -#8 x 3/4 (19mm) Phillips Panhead Screws each. Position screws 6 inches (150mm) in from each end and center the middle one. D When installing the ottom and Top Guide Rail, use the convenient Pile Opener included with this kit, to temporarily separate the two insect piles. This will make for easier viewing and installation of the screws. Pile Opener Q 10 djusting the Top Guide Wheel(s) & andles djust the Q-Top Retainer Guide so that they are positioned at the top of the Pull ar(s) approximately 1/8 (3mm) below the top guide rail. Tighten llen- ead Set Screw. djust the G-andle heights by loosening the llen-ead Set Screw, move the G-andle as desired and retighten screw. Note: the Q Top Retainer Guide should NOT touch the Top Guide Rail when positioned correctly.

9 sierra 100 SURFE INSTLLTION PGE 9 PRT DESIGNTIONS Screen assette ssembly ottom Guide Rail J O D Top Guide Rail Dual-ount Side Rail with agnet I S G andle oot ody R Q I J oot ody End ap #6 x 3/4 (19mm) Phillips Flathead ountersunk Screws for oot ody End ap P D K Recess ount lips L Surface ount lips L #8 x 3/4 (19mm) Phillips Panhead Screws R G N 1/8 (3mm) x 1-3/4 (44mm) Surface ount Screws for ottom Guide Rail O Surface ount Screw over aps for Top Rail L P Pile Weather Strip Q Top Retainer Guide (can be R installed on outer or inner side.) N R S Rubber umpers Optional Top Guide Rail End ap N

10 sierra 100 installtion instructions PGE 10 SURFE INSTLLTION 1 ounting Surface / Flush ount the -Screen assette using L-Surface ounting lips. 1- Surface Installation Door L Jamb L rickmold 2 width easuring easure the opening width and height in several places and record the smallest and height measurement. Record Width (W) W ead eight () Sill

11 sierra 100 installtion instructions PGE 11 SURFE INSTLLTION I The Screen assette The -Screen assette ssembly can be installed on either the right or left side of the door jamb by flipping the Screen assette (the rounded side of the Screen assette should face outward). Determine which will be top of the -oot ody [3.1] and attach the I-oot ody End ap on the desired top end using three (3) J-#6 x 3/4 (19mm) Phillips Flathead ountersunk Screws. Slide the -oot ody onto what will be the top end of the -Screen assette ssembly [3.2]. I 3.2 Install the Q-Top Retainer Guide [3.3] by sliding it onto the top of the Pull ar (interior side). For now move the Q-Top Retainer Guide down about 6. It will be further adjusted in step Q

12 sierra 100 installtion instructions PGE 12 SURFE INSTLLTION 4.1 L-lips for Surface Install 4 Installing the assette Remove and discard the P-Pile/Weather Strip from the back of -Screen assette. Slide two L-Surface ount lips into the groove on the rear of the Screen assette before proceeding [4.1]. Position the Screen assette, and use -#8 x 3/4 (19mm) Phillips Panhead Screws to secure L-Surface ount lips to the opening [4.2]. 4.2 Surface Installation 5 ut the Top and ottom Rails Using the measurements from Step 2, Subtract 2-1/2 (63mm) from the top guide Subtract 2-1/4 (57mm) from the bottom guide S Note: Your screen comes with an optional S-Top Guide Rail End ap. This End ap may be used if the depth of the door frame trim does not fully cover the ends of the -Top Guide Rail at the end opposite of the -Screen assette. If you choose to use this End ap then deduct an 1/8 (3mm) from the Top Guide before cutting. On the end of the -Top Guide Rail where you will be installing the S-Top Guide End ap, trim away an additional 5/16 (8mm) of the Top Guide Rail Weather Strips before crimping the pile as shown in Step 6. ut the rails to size. If using the S-Top Guide Rail End ap, install now as shown at left. 6 P-Pile/Weather crimp weather strips rimp in the upraised channel lip on the inside of each corner of the to keep the Strip from moving, as shown at left.

13 sierra 100 installtion instructions PGE 13 SURFE INSTLLTION Installing the Top and ottom Guide Rails Slide the -ottom Guide Rail fully onto the tab on the -Screen assette End ap [7.1]. NOTE: The ottom and Top Rails each have decorative grooves on one side. This groove should face the outside [7.2]. Slide the -oot ody upward on the Screen assette to the height at which you wish to install the -Top Guide Rail [7.3]. Slide the -Top Guide Rail onto the tab of the -oot ody [7.4] DEORTIVE GROOVES 7.4

14 sierra 100 installtion instructions PGE 14 SURFE INSTLLTION D 8.1 Slide -ottom Guide Rail inside the flanges of D-Side Rail. Note that the front of -ottom Guide Rail has indented grooves and the the front flange of the D-Side Rail is shorter than the back. 8 Position Side RIL WIT GNET ngle the D-Side Rail with agnet behind and over the -ottom Guide Rail, so that the -ottom Rail is positioned inside the flanges of the D-Side Rail [8.1]. onversely, at the top, the D-Side Rail fits inside the flanges of the -Top Guide Rail [8.2]. Position the wide back of the D-Side Rail flat against the vertical front of the jamb. 8.2 D

15 sierra 100 installtion instructions PGE 15 SURFE INSTLLTION O D O 9 Secure The Rails With Screws -Top Guide Rail Drill two 3/8 (9.5mm) holes evenly spaced through outside face only of the Top Guide Rail. Drill 2 hole sets for single screens. Using these holes as a guide, drill 1/8 (3mm) holes through the rear side of the Rail. Using the larger 3/8 (9.5mm) holes for access, insert screws into the 1/8 (3mm) holes and secure the Rail to the entry with two (2) -#8 x 3/4 (19mm) Phillips Panhead Screws. omplete the installation by inserting O-over aps for Top Rail into access holes. -ottom Guide Rail Using the Decorative Trim Groove [7.2] as a guide (staying underneath the glide platforms inside the ottom Guide Rail), drill 1/8 (3mm) holes evenly spaced through both sides of the ottom Guide Rail. Drill 3 holes for single screens. Secure the rail to the entry with N-1/8 (3mm) x 1-3/4 (44mm) Surface ount Screws. Do not over tighten. Pile Opener N N N Q 10 djusting the Top RETINER GUIDE & andles djust the Q-Top Retainer Guide so that they are positioned at the top of the Pull ar(s) approximately 1/8 (3mm) below the top guide rail. Tighten llen-ead Set Screw. djust the G-andle heights by loosening the llen- ead Set Screw, move the G-andle as desired and retighten screw. Note: the Retainer Guide should NOT touch the Top Guide Rail when positioned correctly.

16 sierra 100 installtion instructions PGE 16 Troubleshooting Guide TE DOOR S OTTO TRESOLD SLOPES STEEPLY: The ottom Guide will not work properly installed at an angle. Use wedge shims to adjust the ottom Guide until level. SREEN IS TORN OR DGED: Replace the mesh using a Screen Refill Kit. TE LOSING GNETS DO NOT FULLY SEL OR TE SREEN DOES NOT LOSE EVENLY: lean the agnets using mild soap and water. clean any debris from inside the ottom Guide. Debris can interfere with closing and smooth screen operation. open the screen and check that the magnet that is located in the Pull ar aligns with the magnetic strip in the D-Dual-ount Side Rail with agnet. To alter the alignment remove the -#8 x 3/4 (19mm) Phillips Panhead Screws for the center of the D-Dual-ount Side Rail. Flex the center of the D-Dual-ount Side Rail 1/8" - 3/16" (3mm-4mm) toward the outside and then reinstall the -#8 x 3/4 (19mm) Phillips Panhead Screws.? Installation Questions? issing Parts? Replacement Parts? DON T GO K TO TE STORE! ontact Toll free geniusscreens.com

17 INSTLLTION ULLETIN for TRESOLD/SILL PPLITIONS There are multitudes of door threshold/sill designs and these must be considered before you install your Retractable Screen. For a proper installation it is important to have or create a level and stable surface for mounting the bottom guide of the retractable screen. efore beginning, identify the exact location where the Screen assette will be installed, because this will influence the position of the ottom Guide. The following are some of the more typical threshold/sill designs and solutions for dealing with these instances. Traditional Retractable Screen with Smooth Fabric Flat Threshold 1 flat threshold/sill for traditional screen Instructions: lean the surface and then mount the Retractable Screen ottom Guide directly to the threshold/sill. Platform Transition (or similar) Flat Threshold with Screen Track 1 flat threshold/sill with screen track Instructions: To span over an existing screen track and make a flat and stable surface, install material such as the Genius Platform Transition [Part #: X-X]. ost hardware stores also sell shim materials or various shaped aluminum trims that will give the same result. Genius TRESOLD/SILL PPLITIONS INSTLLTION ULLETIN part number : V

18 INSTLLTION ULLETIN for TRESOLD/SILL PPLITIONS 2 Sloped Sill Wedge Shims from Genius [Part No Long & Snap-Together] 1 Sloped Threshold/sill for TRDITIONL SREENS Sloped Threshold Sloped Threshold Generic Sloped Sill Shim 2 Instructions: For all other retractable screen styles you will need to make a flat and stable surface by installing shim material using the Genius Sloped Sill Wedge Shims [Part #: ] [2]. lso, most hardware stores also sell an L shaped aluminum trim that works nicely for this purpose [3]. Sloped Threshold Sloped Threshold Sloped Sill Wedge Shims from Genius [Part No Long & Snap-Together] Generic Sloped Sill Shim Original Existing Screen Track Original Existing Screen Track D1 D2 Sloped Threshold/sill with screen track Instructions: To span over an existing screen track and, make a flat and stable surface, install shim material such as the threshold/sill using the Genius Sloped Sill Wedge Shims [Part #: ] [D1]. ost hardware stores also sell a flat stock or an L shaped aluminum trim that works nicely for this purpose [D2].

19 INSTLLTION ULLETIN for TRESOLD/SILL PPLITIONS 3 Existing Door Track Genius ottom Guide Shims Existing Door Screen Track E1 sliding patio door Thresholds with SREEN TRK Instructions: any Patio Doors have a Screen Track [E1] that will now be obsolete with the installation of your Retractable Screen. For all Genius smooth screen fabric systems (non-pleated screens), there are instances where resting the ottom Guide above the existing screen track is the desirable method. If needed, add shims to create a stable, level surface for mounting the Guide. E2 If however, the existing door s Screen Track is removable, take out the Track by hand or with any type of pliers [E2]. Existing Door Track Genius ottom Guide Shims E3 Then add non-degradable shim material (plastic, nylon or similar) [E3] so that you create a flat and stable surface for the Retractable Screen ottom Guide Rail. Note: Pleated style screens require the use of the Genius Sheer Screen Surface ount Kit. See Installation ulletin - Sheer Screen Surface ount Kit. Existing Door Track

20 INSTLLTION ULLETIN for TOP & SIDE GUIDE RILS 4 INSTLLTION ULLETIN for TOP ND SIDE GUIDE RILS Existing Side Door Frame Shims to Flatten Install Surface 1 EXISTING SIDE RIL PREPRTION with SIS Instructions: Since there are multitudes of door master frame designs, all surfaces where you will be mounting the screen must be considered before you install the retractable screen. In the case of the side rails, again, existing door frames may have multiple channels, or flanges of different heights, that make for a surface too uneven for efficient installation of your new screen. In this case, you will need to shim this channel or channels to the height of the tallest flange in the existing side door frame. It is recommended you order or find shims made of a non-degradable material (plastic or nylon, for example) that can be fitted into the channel(s), of sufficient length to assure a flat and vertically plumb surface for the new side rail.

This Genius retractable screen is being provided in an easy to custom size and assemble kit.

This Genius retractable screen is being provided in an easy to custom size and assemble kit. T S HGHLY REOMMENE THT THE NSTRUTONS E RE THROUGH EFORE NSTLLTON. RETRTLE SREEN OOR MLNO 100 SNGLE OOR installation instructions 42 MM cassette NSTLLTON TOOLS Phillips Screwdriver measuring tape Hand-Held

More information

IT IS HIGHLY RECOMMENDED THAT THE INSTRUCTIONS BE READ THROUGH BEFORE INSTALLATION.

IT IS HIGHLY RECOMMENDED THAT THE INSTRUCTIONS BE READ THROUGH BEFORE INSTALLATION. T S HGHLY REOENE THAT THE NSTRUTONS E REA THROUGH EFORE NSTALLATON. RETRATALE SREEN OOR LANO 100 SNGLE OOR NSTALLATON NSTRUTONS See our installation video at www.geniusscreens.com/videos/ NSTALLATON TOOLS

More information

SIERRA 100 SINGLE DOOR SCREEN OWNER S GUIDE AND INSTALLATION SIERRA 100 RETRACTABLE SCREEN DOOR WE CAN ASSIST YOU

SIERRA 100 SINGLE DOOR SCREEN OWNER S GUIDE AND INSTALLATION SIERRA 100 RETRACTABLE SCREEN DOOR WE CAN ASSIST YOU 202220903-1115 SERR 100 SNGLE OOR SREEN OWNER S GUE N NSTLLTON SERR 100 RETRTLE SREEN OOR Thank you for choosing the GENUS SERR retractable screen door. Your new door features a fully-assembled screen

More information

LEGENDS RETRACTABLE DOOR SCREENS

LEGENDS RETRACTABLE DOOR SCREENS LEGENDS RETRACTABLE DOOR SCREENS MAGNETIC LATCHING DESIGN SYSTEM 42 I N S T A L L A T I O N I N S T R U C T I O N S 1 MOUNTING OPTIONS Recess : Mount the Screen Cassette using Recess Mounting Clips Recess

More information

LEGENDS RETRACTABLE DOOR SCREENS

LEGENDS RETRACTABLE DOOR SCREENS I N S T A L L A T I O N I N S T R U C T I O N S 1 MOUNTING OPTIONS Recess : Mount the Screen Cassette using Recess Mounting Clips Recess within the door jamb area. Recess installations are the most typically

More information

SYSTEM 42 SCREEN CASSETTE WITH 30mm SIDE RAIL

SYSTEM 42 SCREEN CASSETTE WITH 30mm SIDE RAIL LEGENDS VERTICAL WINDOW RETRACTABLE SCREEN SYSTEM 42 SCREEN CASSETTE WITH 30mm SIDE RAIL I N S T A L L A T I O N I N S T R U C T I O N NOTE: Screen components must be installed on a flat surface to ensure

More information

Quick Fit Installation Guide Retractable Screen - Single Door

Quick Fit Installation Guide Retractable Screen - Single Door Quick Fit Installation Guide Retractable Screen - Single Door 1 REMOVE KIT PARTS FROM SHIPPING TUBE 15 Mounting screws 1 Housing end cap screw 2 Handles 1 Housing end cap 1 Bushing 1 Pull bar end cap 2

More information

Quick Fit Installation Guide Retractable Screen - Double Door

Quick Fit Installation Guide Retractable Screen - Double Door Quick Fit Installation Guide Retractable Screen - Double Door 1 REMOVE KIT PARTS FROM SHIPPING TUBE 2 Slide bolts 2 Rail receiver Clips 15 Mounting screws 1 Housing end cap screw 2 Handles 1 Housing end

More information

IT IS HIGHLY RECOMMENDED THAT THE INSTRUCTIONS BE READ THROUGH BEFORE INSTALLING WINDOW. HAND-HELD OR POWER SAW

IT IS HIGHLY RECOMMENDED THAT THE INSTRUCTIONS BE READ THROUGH BEFORE INSTALLING WINDOW. HAND-HELD OR POWER SAW 202220700-1115 TURE VUE VERTI PU-DOW RETRTE WIDOW SREE ISTTIO ISTRUTIOS IT IS HIHY REOEDED THT THE ISTRUTIOS E RED THROUH EFORE ISTI WIDOW. ISTTIO TOOS PHIIPS SREWDRIVER ESURI TPE HD-HED OR POWER SW POWER

More information

SHEER CLASSIC INSTALLATION TOOLS INSTALLATION PREP CUTTING INSTRUCTIONS ELEGANT PLEATED RETRACTABLE SCREEN DOOR

SHEER CLASSIC INSTALLATION TOOLS INSTALLATION PREP CUTTING INSTRUCTIONS ELEGANT PLEATED RETRACTABLE SCREEN DOOR T S GLY RCOMMNDD TAT T NSTRUCTONS B RAD TROUG BFOR NSTALLATON. SR CLASSC for recess/inside mounting only NSTALLATON TOOLS LGANT PLATD RTRACTABL SCRN DOOR installation instructions Phillips Screwdriver

More information

RETRACTABLE SCREEN ASSEMBLY AND INSTALLATION INSTRUCTIONS. SINGLE OUTSWING (Retro) / (Full-Size) STEP 1: REVIEW & CHECK FIG.

RETRACTABLE SCREEN ASSEMBLY AND INSTALLATION INSTRUCTIONS. SINGLE OUTSWING (Retro) / (Full-Size) STEP 1: REVIEW & CHECK FIG. STEP 1: REVIEW & CHECK ) CONFIRM DOOR HEIGHT & WIDTH You have purchased a SINGLE Retractable Screen for an INSWING door. HEIGHT: This unit is available in two sizes: Retro and Full-Size. Please make sure

More information

RETRACTABLE SCREEN ASSEMBLY AND INSTALLATION INSTRUCTIONS. DOUBLE INSWING (Retro) / (Full-Size) FIG. 1A STEP 1: REVIEW & CHECK FIG.

RETRACTABLE SCREEN ASSEMBLY AND INSTALLATION INSTRUCTIONS. DOUBLE INSWING (Retro) / (Full-Size) FIG. 1A STEP 1: REVIEW & CHECK FIG. STEP 1: REVIEW & CHECK ) CONFIRM DOOR HEIGHT & WIDTH You have purchased a DOUBLE Retractable Screen for an INSWING door. HEIGHT: This unit is available in two sizes: Retro and Full-Size. Please make sure

More information

Insolroll Clutch Operated Shades Installation Instructions Installation Instructions

Insolroll Clutch Operated Shades Installation Instructions Installation Instructions All clutch operated shades are shipped fully assembled and ready for installation. Mounting screws are not provided. Screws for chain guide installation to meet the child safety standards are provided.

More information

Retractable Screen Installation Instructions For Vinyl and Aluminum Clad and Wood In-Swing Hinged Doors (See separate instructions for sliding doors)

Retractable Screen Installation Instructions For Vinyl and Aluminum Clad and Wood In-Swing Hinged Doors (See separate instructions for sliding doors) Retractable Screen Installation Instructions For Vinyl and Aluminum Clad and Wood In-Swing Hinged Doors (See separate instructions for sliding doors) IMPORTANT: Please read before you begin. Table of Contents

More information

4-lite Patio Door. Installation Instructions

4-lite Patio Door. Installation Instructions 4-lite Patio Door Installation Instructions IMPORTANT: Read the instructions and familiarize yourself with the door parts and pieces before beginning assembly and installation. Note: Only the 5-0 x 6-8

More information

Sliding Glass Door Assembly and Installation Guide

Sliding Glass Door Assembly and Installation Guide Sliding Glass Door Assembly and Installation Guide Index Door System Components and Hardware The following components are needed to complete the installation of your Sliding Patio Door unit. Check all

More information

INOVO 4-LITE SLIDING PATIO DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS

INOVO 4-LITE SLIDING PATIO DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS INOVO 4-LITE SLIDING PATIO DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS IMPORTANT: READ THE INSTRUCTIONS AND FAMILIARIZE YOURSELF WITH THE DOOR PARTS AND PIECES BEFORE BEGINNING ASSEMBLY AND INSTALLATION.

More information

1200 SERIES 2 PANEL DOOR rev.1 DETAILED INSTALLATION INTRUCTIONS

1200 SERIES 2 PANEL DOOR rev.1 DETAILED INSTALLATION INTRUCTIONS 1200 SERIES 2 PANEL DOOR 10.2013 rev.1 DETAILED INSTALLATION INTRUCTIONS GENERAL: Door elevations shown in these instructions are as viewed from the outside. X denotes the active or moving panel(s). O

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Thank You, for your recent purchase with TrimLine Windows, Inc. This is a quality product and deserves a quality installation. Please follow the attached instructions for a quick

More information

DIANE MODEL PASS-THRU

DIANE MODEL PASS-THRU INSTALLATION INSTRUCTIONS MODELS D101 AND D10 DIANE MODEL PASS-THRU 50 E. Vernon Avenue, Los Angeles, CA 90058-186 Phone: (800) 41-6144 EXT. 7760 Fax: (800) 458-7496 crlaurence.com Email: transaction@crlaurence.com

More information

Pet Door Panel Installation Manual

Pet Door Panel Installation Manual Pet Door Panel Installation Manual 400-558-1 1 4/3/03, 3:26 PM Components: Pet Door Panel Panel Latch Assembly Foam Weather-stripping Glass Sweep (4) Binding Posts (6) #6 x 1/2 Sheet Metal Screws (4) 8-32

More information

western window systems westernwindowsystems.com installation instructions non-pocket 2-1/4 panels

western window systems westernwindowsystems.com installation instructions non-pocket 2-1/4 panels series 2600 multi-slide non-pocket 2-1/4 panels windowsystems.com windowsystems.com movement, which can cause warping and other problems. Frame kit components: Each door will have a head assembly, a threshold

More information

Mira Premium Series Bi-Parting French Sliding Patio Door Installation Instructions

Mira Premium Series Bi-Parting French Sliding Patio Door Installation Instructions PREMIUM SERIES W I N D O W S Mira Premium Series Bi-Parting French Sliding Recommended Tools & Accessories Tape Measure Level (3 or longer) Hammer Power Screwdriver Load bearing Shims Flashing (recommended)

More information

Installation Operation Care

Installation Operation Care Installation Operation Care Palm Beach Polysatin Shutters CONTENTS Getting Started Installation Overview...1 Unpacking...1 Tools and Materials Needed...1 Fasteners...2 Frame Assembly Assemble the Frame

More information

Knock Down Patio Door Assembly Instructions Regular & Impact

Knock Down Patio Door Assembly Instructions Regular & Impact Knock Down Patio Door Assembly Instructions Regular & Impact 72 x 80 72 x 82 72 x 96 96 x 80 96 x 82 96 x 96 Impress the Weather KD Patio Door Regular & Impact Sizes 72 x 80 72 x 82 72 x 96 96 x 80 96

More information

3-LITE PATIO DOOR INSTALLATION INSTRUCTIONS

3-LITE PATIO DOOR INSTALLATION INSTRUCTIONS 3-LITE PATIO DOOR INSTALLATION INSTRUCTIONS IMPORTANT: Read the instructions and familiarize yourself with the door parts and pieces before beginning assembly and installation. TOOLS NEEDED: Tape Measure

More information

VYTEX PREMIUM SLIDING GLASS DOOR. Table of Contents. Precautions and Safety 2. Tools Required...3. Inspect and Prepare Door...4

VYTEX PREMIUM SLIDING GLASS DOOR. Table of Contents. Precautions and Safety 2. Tools Required...3. Inspect and Prepare Door...4 VYTEX PREMIUM SLIDING GLASS DOOR Table of Contents Precautions and Safety 2 Tools Required...3 Inspect and Prepare Door...4 Hardware and Parts Check List....4 Master Frame Assembly 5 Master Frame Installation..7

More information

INOVO 2-LITE SLIDING PATIO DOOR

INOVO 2-LITE SLIDING PATIO DOOR INOVO 2-LITE SLIDING PATIO DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS IMPORTANT: READ THE INSTRUCTIONS AND FAMILIARIZE YOURSELF WITH THE DOOR PARTS AND PIECES BEFORE BEGINNING ASSEMBLY AND INSTALLATION.

More information

Contemporary 3 Panel Classic 5 Panel French Panel

Contemporary 3 Panel Classic 5 Panel French Panel Contemporary 3 Panel Classic 5 Panel French Panel (X) Operating / Lock Panel Left (O) Fixed Panel Right Note : Glazing Beads For All Panel Face To The Exterior 2 Panel XO Left Is Shown Above Opposite =

More information

UNIT No FRAMELESS PIVOT SHOWER DOOR

UNIT No FRAMELESS PIVOT SHOWER DOOR INSTALLATION INSTRUCTIONS UNIT No. 3600 FRAMELESS PIVOT SHOWER DOOR NEED INSTALLATION HELP? Call 1-800-45-BASCO (452-2726) Monday - Friday 8:00 A.M. - 4:30 P.M. Eastern Time QCI0020 Rev. 3 Page 1 of 8

More information

HONEYCOMB SHADES. Cordless INSIDE MOUNT. A few simple tools are required: STANDARD HARDWARE OPTIONAL HARDWARE

HONEYCOMB SHADES. Cordless INSIDE MOUNT. A few simple tools are required: STANDARD HARDWARE OPTIONAL HARDWARE HONEYCOMB SHADES Cordless GETTING STARTED BRACKET INFORMATION A few simple tools are required: Steel Tape Measure Pencil Level (for outside mount) The brackets you received with your product are REQUIRED

More information

Installation, Operation and Care Instructions. Continuous Cord Loop Operating System

Installation, Operation and Care Instructions. Continuous Cord Loop Operating System Installation, Operation and Care Instructions Continuous Cord Loop Operating System CONTENTS Getting Started: Product View... 1 Tools and Fasteners Needed... 2 Installation: Installation Overview... 3

More information

Phone # La Jolla Doors. Block Frame Installation Manual Aluminum Frame with either Vinyl or Aluminum Panels

Phone # La Jolla Doors. Block Frame Installation Manual Aluminum Frame with either Vinyl or Aluminum Panels Phone # 800-440-8785 www.lajolladoors.com La Jolla Doors Block Frame Installation Manual Aluminum Frame with either Vinyl or Aluminum Panels Thank you for choosing La Jolla Doors In this manual you will

More information

Cellular SlumberShade

Cellular SlumberShade Cellular SlumberShade with energy saving blackout sidetracks Installation Instructions 152110 1/6/2011 BASICS A few simple tools are required: - Measuring tape - Power drill, drill bits - Hex head and/or

More information

Installation instructions, accessories. Rails. Volvo Car Corporation Gothenburg, Sweden. Instruction No Version Part. No

Installation instructions, accessories. Rails. Volvo Car Corporation Gothenburg, Sweden. Instruction No Version Part. No Instruction No Version Part. No. 8685942 1.0 Rails J8401014 Page 1 / 9 Equipment A0000162 A0000161 J8401006 Page 2 / 9 INTRODUCTION Read through all of the instructions before starting installation. Notifications

More information

463-GP. Swing Door. Technical Assistance is available Monday - Friday, 8:00 a.m. - 5:00 p.m. (Central Time) (Toll Free) 463-GP 5/06

463-GP. Swing Door. Technical Assistance is available Monday - Friday, 8:00 a.m. - 5:00 p.m. (Central Time) (Toll Free) 463-GP 5/06 463-GP Swing Technical ssistance is available Monday - Friday, 8:00 a.m. - 5:00 p.m. (Central Time) 1-877-723-7190 (Toll Free) PRTS LIST FRME PCKGE KEY DESCRIPTION PRT QTY SILL 855 1 JM 942 2 E MGNETIC

More information

713C-GP. Pivot Door. Technical Assistance is available Monday - Friday, 8:00 a.m. - 5:00 p.m. (Central Time) (Toll Free) 713C-GP 8/06

713C-GP. Pivot Door. Technical Assistance is available Monday - Friday, 8:00 a.m. - 5:00 p.m. (Central Time) (Toll Free) 713C-GP 8/06 713C-P Door Technical Assistance is available Monday - Friday, 8:00 a.m. - 5:00 p.m. (Central Time) 1-877-723-7190 (Toll Free) PARTS IST FRAME PACKAE KEY DESCRIPTION PART QTY A SI A195 1 PIVOT JAM A196

More information

LAN Locker Adjustable Shelves

LAN Locker Adjustable Shelves Adjustable Shelves LAN LOCKER ADJUSTABLE SHELVES * Adjustable Shelves are available for LAN LOCKER widths: 24, 30, 48, 60, and 72. * When installing more than one Adjustable Shelf, it is recommended that

More information

Frameless Bypass Slider

Frameless Bypass Slider INSTALLATION INSTRUCTIONS Frameless Bypass Slider QCI-5301 Heavy Glass Bypass Slider with Exposed Rollers QCI5301 Rev 0 Page 1 Certified 11/1/2016 Tools: To install your New Shower Enclosure, you may need

More information

CONTENTS TOOL LIST U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS. Revised: June 2013

CONTENTS TOOL LIST U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS. Revised: June 2013 U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS TOOL LIST Required Tools: - Reciprocating Saw with Metal Cutting Blade - Drill - 7/16 Drill Bit for Metal Drilling -

More information

1 Removing The Screen Track, Screen and Screen Rollers Note: The screen remains in the track while the track is removed and/or installed.

1 Removing The Screen Track, Screen and Screen Rollers Note: The screen remains in the track while the track is removed and/or installed. Sliding Door Screen and Screen Track Replacement Service Instruction These instructions apply to: Architect Series 12/2004-Current Designer Series 3/2005-Current Tools Required: #2 Phillips head screwdriver

More information

Installation Instructions

Installation Instructions by Precision Screen & Security s 27040 San Bernardino Ave, Redlands, CA 92374 www.precision-screens.com TM Installation Instructions NOTE: Prior to Permanently mounting the BacTrac, insure the handle and

More information

Cellular Shades SLUMBERSHADE. with energy saving blackout sidetracks. Installation & Care Instructions

Cellular Shades SLUMBERSHADE. with energy saving blackout sidetracks. Installation & Care Instructions Cellular Shades SLUMBERSHADE with energy saving blackout sidetracks Installation & Care Instructions 152725 B 9/14/2017 GETTING STARTED A few simple tools are required: - Measuring tape - Power drill,

More information

RETAIN PACKAGING DURING INSTALLATION Do NOT discard packaging materials until installation is complete CONTACT US BEFORE RETURNING

RETAIN PACKAGING DURING INSTALLATION Do NOT discard packaging materials until installation is complete CONTACT US BEFORE RETURNING 4 3 6 5 4 3 1 Advanced Screen Systems Recessed Mount Premium Security Storm Door Advanced Screen Systems Installation Instructions Read completely through the installation instructions before proceeding

More information

Premium Light Filtering Sheer Shade

Premium Light Filtering Sheer Shade Premium Light Filtering Sheer Shade Installation Instructions Email: customerservice@blindster.com Call us: (888) 256-8672 Mon - Fri 8am - 7pm (CT) Congratulations on purchasing a Premium Light Filtering

More information

Premium Security Screen Door Installation Instructions

Premium Security Screen Door Installation Instructions 4 4 Advanced Screen Systems Surface Mount Premium Security Screen Door Installation Instructions Read completely through the installation instructions before proceeding with installation Installation requires

More information

6400, 8400 and 9400 Series Sliding Patio Door

6400, 8400 and 9400 Series Sliding Patio Door Contemporary 3 Panel Classic 5 Panel French Panel 6400, 8400 and 9400 Series Sliding Patio Door (O) Fixed Panel Left (X) Operating / Mullion Panel Right (X) Operating / Lock Panel Left (O) Fixed Panel

More information

TASK: Replace Control Mechanism/Drive End for G71 Supervue/Everglide Vertical headrail

TASK: Replace Control Mechanism/Drive End for G71 Supervue/Everglide Vertical headrail 1. Locate the clear plastic louver stems where louvers are attached. 2. Rotate louvers open. Slide a hard plastic card between the louver and the long side of the louver stem. Push the card and louver

More information

HORIZONTAL RETRACTABLE SCREEN Unika and Genius

HORIZONTAL RETRACTABLE SCREEN Unika and Genius HORIZONTAL RETRACTABLE SCREEN Unika and Genius Single Door Assembly and Fitting Guide. Please read through before installing your screen. Retractable Horizontal Screen Single Door (Unika shown) Before

More information

Installing the Profile Privacy Panel. Assemble top mounting bracket. Prerequisites. Tools

Installing the Profile Privacy Panel. Assemble top mounting bracket. Prerequisites. Tools Installing the Profile Privacy Panel Complete these instructions to install the Profile Privacy Panel. Privacy panels are available in various heights to match tiers and include mounting hardware for slat

More information

Model 2400/4000 Illustrated Installation Instructions

Model 2400/4000 Illustrated Installation Instructions Model 2400/4000 Illustrated Installation Instructions Contractors Wardrobe DESIGNERS MNUFCTURERS 26121 venue Hall Valencia, C 955 (661) 257-77 Fax: (661) 257-4907 Toll Free: (800) CW-DOORS (800) 293-6677

More information

FOLDING DOOR INSTRUCTIONS

FOLDING DOOR INSTRUCTIONS FOLDING DOOR INSTRUCTIONS Please read these instructions carefully and follow them step by step to insure a smooth installation. Most importantly DO NOT open hardware boxes and mix hardware up. Hardware

More information

846-GP. Neo-Angle Enclosure. Technical Assistance is available Monday - Friday 8:00 a.m. - 5:00 p.m. (Central Time) GP 12/05

846-GP. Neo-Angle Enclosure. Technical Assistance is available Monday - Friday 8:00 a.m. - 5:00 p.m. (Central Time) GP 12/05 846-GP Neo-ngle Enclosure Technical ssistance is available Monday - Friday 8:00 a.m. - 5:00 p.m. (Central Time) 1-877-723-7190 PRTS LIST FRME PCKGE KEY ESCRIPTION PRT QTY SILL 855 3 M 942 2 C HEER 101

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS TOOLS REQUIRED Rechargeable, variable speed drill 3/8 diameter drill bit 3 Robertson bits #0, #1 and #2 Slot screwdriver Non marring hammer with 1 head Level Caulk or sealant

More information

Phantom Door Installation Manual

Phantom Door Installation Manual Tools Required: Drill Drill Bit - 1/8 drill bit for the housing Driver Bit - 25018 - #1 4 bit w/ rounded shaft or 25012 - #1 4 bit w/ hex shaft 25013 - #2 4 bit with hex shaft (depending on fasteners used

More information

3/16 OR 1/4 FRAMELESS SWING DOOR WITH SINGLE INLINE PANEL OR TWO INLINE PANELS

3/16 OR 1/4 FRAMELESS SWING DOOR WITH SINGLE INLINE PANEL OR TWO INLINE PANELS / OR / FRAMELESS SWING DOOR WITH SINGLE INLINE OR TWO INLINE S This instruction sheet applies to the following units with a magnetic handle. C7, C7, C79 This instruction sheet also applies to the following

More information

INSTALLATION INSTRUCTIONS IMPERVIA SLIDING PATIO DOOR WITH FINS

INSTALLATION INSTRUCTIONS IMPERVIA SLIDING PATIO DOOR WITH FINS 2008 Pella Corporation Part Number: 803V0101 INSTALLATION INSTRUCTIONS IMPERVIA SLIDING PATIO DOOR WITH FINS Installation Instructions for Typical Wood Frame Construction. These instructions were developed

More information

Installation Instructions. Oakmont Folding Doors

Installation Instructions. Oakmont Folding Doors Before You Start For quick and easy installation of your Oakmont folding door, read these instructions thoroughly. A few minutes of prior planning will make the job easier and ensure years of trouble-free

More information

Topo Freestanding Applications - Private Office

Topo Freestanding Applications - Private Office 4 3 2 Topo Freestanding Applications - Private Office Combo Wrench If you have a problem, question, or request, call your local dealer, or Coalesse at 1.800.627.6770 Or visit our website: www.coalesse.com

More information

INSTALLATION AND CARE INSTRUCTIONS

INSTALLATION AND CARE INSTRUCTIONS INSTALLATION AND CARE INSTRUCTIONS Skylight Manually Operated Honeycomb Shades 20 C8-10-1806 2/15 1 INTRODUCTION Thank you for purchasing our product. Your new shade has been custom built for you from

More information

Block Frame Inovo Patio Door/Transom/Sidelite Field Mulling Instructions. simonton.com/installation. If mulling sidelites, skip to Step 5.

Block Frame Inovo Patio Door/Transom/Sidelite Field Mulling Instructions. simonton.com/installation. If mulling sidelites, skip to Step 5. Effective Date: 10/1/17 Tools Needed Kit Contents Safety Glasses Cordless Drill Phillips Screw Bit Two-step Drill Bit (3/8-1/8 ) Utility Knife Interior Mullion Exterior Mullion Cover Hardware Kit Clamps

More information

Frameless Bypass Slider

Frameless Bypass Slider INSTALLATION INSTRUCTIONS Frameless Bypass Slider QCI-5301 3/8 or 1/4 Glass Bypass Slider with Exposed Rollers QCI5301 Rev 1 Page 1 Certified 6/5/2017 Tools: To install your New Shower Enclosure, you may

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS BUILDERS CHOICE FRAMED Shower Height Swing Door Model: L533 Rev. 09.03.13 MAINTENANCE: Two primary materials are used to manufacture your new Aquatic enclosure; tempered glass

More information

101B, 210X, ELM, VSTB Installation Manual

101B, 210X, ELM, VSTB Installation Manual 101B, 210X, ELM, VSTB Installation Manual 99-16105-I001 Copyright 2010 by ALL rights reserved. Information in this document is subject to change without notice. Companies, names and data used in examples

More information

Installation Operation Care

Installation Operation Care Installation Operation Care Palm Beach Polysatin Shutters CONTENTS Getting Started Installation Overview... 1 Unpacking... 1 Tools and Materials Needed... 1 Fasteners... 2 Frame Assembly Assemble the Frame

More information

Frameless Fixed Panel Slider

Frameless Fixed Panel Slider INSTALLATION INSTRUCTIONS Frameless Fixed Panel Slider QCI-5279 SINGLE ROLLER WITH ANTI-JUMP DOUBLE ROLLERS QCI5279 Rev Page Certified 08/09/6 Tools: To install your New Shower Enclosure, you may need

More information

Installation And Care Instructions. Vertical Honeycomb Shades

Installation And Care Instructions. Vertical Honeycomb Shades Installation And Care Instructions Vertical Honeycomb Shades Rev 5/2013 Table Of Contents Getting Started... 3 Parts Overview... 4 Materials Required... 5 Tools Required... 6 Outside Mount Installation...

More information

RAMPAGE P R O D U C T S. INSTALLATION INSTRUCTIONS BRONCO ZIPPER FASTRACK TOP PART #984xx BRONCO TOOLS REQUIRED

RAMPAGE P R O D U C T S. INSTALLATION INSTRUCTIONS BRONCO ZIPPER FASTRACK TOP PART #984xx BRONCO TOOLS REQUIRED RAMPAGE P R O D U C T S 84 (+/- 1/4 ) INSTALLATION INSTRUCTIONS BRONCO ZIPPER FASTRACK TOP PART #984xx BRONCO 1966-1977 TOOLS REQUIRED 3/8 WRENCH 7/16 WRENCH ½ WRENCH #2 PHILLIPS SCREWDRIVER 1/8 DRILL

More information

Chapter 18. Interior Doors

Chapter 18. Interior Doors Chapter 18. Interior Doors 18.1 SWINGING DOORS 18.2 SLIDING DOORS 18.3 BIFOLD DOORS Tools needed by volunteers: Hammer Nail apron Tape measure Square Pencil Tools and equipment needed: Extension cords

More information

C.R. LAURENCE CO. INC Installation Instructions

C.R. LAURENCE CO. INC Installation Instructions IMPORTANT: PLEASE READ BEFORE INSTALLING THE WINDOW The following instructions will reduce your chances of experiencing problems during installation, and ensure smooth, trouble-free operation of these

More information

Vista SCREEN. and Double Door Link Kit. Installation Manual for. For Double Doors (French Doors) Quick and Easy to Size and Install

Vista SCREEN. and Double Door Link Kit. Installation Manual for. For Double Doors (French Doors) Quick and Easy to Size and Install and Double Door Link Kit Installation Manual for Vista SCREEN TM Quick and Easy to Size and Install For Double Doors (French Doors) Durable. Reliable. Attractive. For door openings up to 72 13 /16 (1,849

More information

3.2.3 Rear Door Window and Quarter Window Carrier Assembly

3.2.3 Rear Door Window and Quarter Window Carrier Assembly Tighten all bolts. Tighten bolts marked -1- and -2- in specified sequence. Tightening torque: 8 Nm Remaining bolts can be tightened in any sequence. Insert door window -3- through window recess without

More information

Series 1500 Aluminum Door Canopy

Series 1500 Aluminum Door Canopy Series 500 Aluminum Door Canopy with Sidewings It is our recommendation that you read instructions carefully prior to assembly and installation. Series 500 with Sidewings mounting bar (A) top trim (B)

More information

SSRLS-3 / SSRLU-3 Installation Instructions

SSRLS-3 / SSRLU-3 Installation Instructions 5mm Hex Nut Upper Telescoping hannel & Screws Packing List QTY. ITM 1 Top Telescoping hannel 1 ottom Telescoping hannel w/ self drilling screw 15" 18" 1 Top and ottom Rod with connecting arm 25-½ 2 ¼ -

More information

Cellular Shades CORD LOOP Standard Top Down - Bottom Up. Installation & Care Instructions

Cellular Shades CORD LOOP Standard Top Down - Bottom Up. Installation & Care Instructions Cellular Shades CORD LOOP ucontact@udoblinds.com 1-855-205-8442 Standard Top Down - Bottom Up Installation & Care Instructions GETTING STARTED A few simple tools are required: - Measuring tape - Power

More information

InSTallaTIon InSTruCTIonS For 4-lITe PaTIo Door unassembled

InSTallaTIon InSTruCTIonS For 4-lITe PaTIo Door unassembled InSTallaTIon InSTruCTIonS For 4-lITe PaTIo Door unassembled Measuring Tape Pencil Shims Drill & Drill bits: 6", 8", 5 6", 7 6" Tools & materials You Will need: Square Hammer or Mallet Level Stiff Putty

More information

Pocket Door Installation Instructions

Pocket Door Installation Instructions Installation Instructions Before getting started: Read instructions thoroughly. Be sure that you have the necessary tools and materials before starting the installation. Consult your local building code

More information

675 Quick N Stall Neo Angle Framed Hinge Shower Enclosure

675 Quick N Stall Neo Angle Framed Hinge Shower Enclosure INSTALLATION INSTRUCTIONS 675 Quick N Stall Neo Angle Framed Hinge Shower Enclosure Call Technical Dept @ 1-800-452-2726 QCI1003 Page 1 of 9 Certified 10/01/09 INSTALLATION NOTES: Unpack your unit carefully

More information

Series 7600 Installation Instructions Aluminum Multi-Slide Door (Pocketing)

Series 7600 Installation Instructions Aluminum Multi-Slide Door (Pocketing) Series 7600 Installation Instructions Aluminum Multi-Slide Door (Pocketing) Things to Know Before You Start Things to Know Before You Start Removal of Old Fenestration Products Ensure any old fenestration

More information

4. Partially open the operating panel and tilt the top toward the interior of the door (Figure 4). Lift the panel off the sill and set it aside.

4. Partially open the operating panel and tilt the top toward the interior of the door (Figure 4). Lift the panel off the sill and set it aside. Effective Date: 10/1/2017 Tools Needed Kit Contents Hardware Kit Safety Glasses Cordless drill Phillips screw bit Two-step drill bit (3/8-1/8 ) utility knife Interior Mullion Exterior Mullion Cover clamps

More information

SLIDING GLASS DOOR ASSEMBLY INSTRUCTION Series 680/780

SLIDING GLASS DOOR ASSEMBLY INSTRUCTION Series 680/780 10/07 M0200030 GENERAL NOTICE READING THESE INSTRUCTIONS FIRST AND FOLLOWING THE PROCEDURES IN PROPER SEQUENCE WILL REDUCE FRUSTRATION, COSTLY MISTAKES AND WASTED TIME. Protect main frame only with light

More information

C70 Window Roller Repair Taken from: Heres the problem:

C70 Window Roller Repair Taken from:  Heres the problem: C70 Window Roller Repair Taken from: http://www.volvospeed.com/vs_forum/topic/115086-how-to-c70-window-rollers-permanent-fix/ Heres the problem: This happened to two separate window assemblys on my c70

More information

Modular Drawer & Door Systems Installation Instructions Locking Drawers and Receding Doors

Modular Drawer & Door Systems Installation Instructions Locking Drawers and Receding Doors Modular Drawer & Door Systems Installation Instructions ocking Drawers and Receding Doors Pre-Installation Before you begin installation: 1. Read through the installation procedure before starting the

More information

Basic Spring Motor Roller Shades

Basic Spring Motor Roller Shades Basic Spring Motor Roller Shades ATTENTION!!! READ CAREFULLY! This shade has a reliable long-lasting Spring Motor. The Spring Motor must have proper tension in order to function as intended. Handling in

More information

Before Assembling the Storage Wall

Before Assembling the Storage Wall Chapter 1 Assembling the Lista Storage Wall Lista provides two types of standard Storage Walls: B251 and B255. The design, construction, assembly, and quality are identical for both types, however, B251

More information

Step by Step Installation Instructions. Poly Shutters. Customer Service or visit us online at smithandnoble.com

Step by Step Installation Instructions. Poly Shutters. Customer Service or visit us online at smithandnoble.com Step by Step Installation Instructions Poly Shutters Customer Service 800.248.8888 or visit us online at smithandnoble.com Thank you for purchasing from smith+noble. Your new window treatments have been

More information

INSTALLATION INSTRUCTIONS VENETIAN 84" SLIDING SHOWER DOOR SYSTEM (180º INSTALLATION)

INSTALLATION INSTRUCTIONS VENETIAN 84 SLIDING SHOWER DOOR SYSTEM (180º INSTALLATION) INSTALLATION INSTRUCTIONS VENETIAN 84" SLIDING SHOWER DO SYSTEM (180º INSTALLATION) 28539 Industry Drive, Valencia, CA 91355 Toll Free Phone: (877) 728-3874 Toll Free Fax: (888) 440-9567 Phone: (661) 775-1675

More information

INSTALLATION INSTRUCTIONS. UNIT No. 160/760 THIN-LINE SHOWER ENCLOSURE

INSTALLATION INSTRUCTIONS. UNIT No. 160/760 THIN-LINE SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS UNIT No. 160/760 THIN-LINE SHOWER ENCLOSURE QCI0011 Rev. 0 Page 1of 10 Certified 10/18/2006 MAINTENANCE: Two primary materials are used to manufacture your new Basco enclosure;

More information

INSTALLATION AND CARE INSTRUCTIONS

INSTALLATION AND CARE INSTRUCTIONS INSTALLATION AND CARE INSTRUCTIONS Vertical Applications Honeycomb Shades 52 C8-10-3401 Rev 2/14 CONTENTS Introduction...2 Before You Begin...3 Vertical Application Parts Overview...4 Materials Required...5

More information

Double Swing Door With Header QCI5114

Double Swing Door With Header QCI5114 Double Swing Door With Header QCI5114 QCI5114 REV. 0 Page 1 of 9 Certified 06/22/2016 MAINTENANCE: Two primary materials are used to manufacture your new shower enclosure: tempered glass and anodized aluminum.

More information

Parts List (Continued) 18 each: #8 x 0.625" Truss Head Phillips Screw 20 each: #8 x 1.75" Flat Head Phillips Screw 4 each: #8 x 1.25" Flat Head Philli

Parts List (Continued) 18 each: #8 x 0.625 Truss Head Phillips Screw 20 each: #8 x 1.75 Flat Head Phillips Screw 4 each: #8 x 1.25 Flat Head Philli EVO Tall Pull-Out Wood Pantry Important Notes Always read the instructions completely and carefully before beginning assembly. Remove and check contents for damage and/or missing parts. Keep the original

More information

LEVOLOR. Sheer Shadings. Persianas traslúcidas Stores diaphanes INSTALLATION OPERATION CARE

LEVOLOR. Sheer Shadings. Persianas traslúcidas Stores diaphanes INSTALLATION OPERATION CARE LEVOLOR Sheer Shadings Persianas traslúcidas Stores diaphanes INSTALLATION OPERATION CARE INSTALACIÓN FUNCIONAMIENTO CUIDADO INSTALLATION FONCTIONNEMENT ENTRETIEN Sistema operativo sin cordón Système sans

More information

tile redi redi DOOR Redi Redi Swing Slide g TM TM...Opening Doors to Stunning Showers! TM TM SERIES: CONFIGURATION: MOUNTING PACKAGE:

tile redi redi DOOR Redi Redi Swing Slide g TM TM...Opening Doors to Stunning Showers! TM TM SERIES: CONFIGURATION: MOUNTING PACKAGE: redi DOOR INSTALLATION INSTRUCTIONS tile redi Redi Redi Swing Slide g TM TM...Opening Doors to Stunning Showers! TM TM SERIES: CONFIGURATION: MOUNTING PACKAGE: 3000 Door-Door Header, sliding doors RDQCI5301

More information

Series 1100 Aluminum Door Canopy

Series 1100 Aluminum Door Canopy Series 00 Aluminum Door Canopy with Support Arms It is our recommendation that you read instructions carefully prior to assembly and installation. Series 00 with Support Arms MOUNTING BAR (A) TOP TRIM

More information

Installation Operation Care

Installation Operation Care Installation Operation Care Designer Roller and Designer Screen Shades Standard and Cassette Cordless Lifting System CONTENTS Getting Started: Product Views... 1 Tools and Fasteners Needed... 3 Installation

More information

Product must be installed as shown using the screws and brackets provided. Use of incorrect hardware could result in damage to the product.

Product must be installed as shown using the screws and brackets provided. Use of incorrect hardware could result in damage to the product. General Notes These installation instructions are intended to be comprehensive for a typical Keyeira/Presto configuration. Your configuration may differ. If you have questions contact Geiger Customer Service

More information

OXYGEN INSTALLATION. Revision date

OXYGEN INSTALLATION. Revision date 12345 1 Hardware List 12345 Flat head wood screw #9 x 7/8 long with #2 Phillips drive, silver Used to attach surfaces and end panels Hex set screw ½-13 x 2 long with 1/4 hex drive, black Used on Legs Hex

More information

Cordless Operable Sidelights

Cordless Operable Sidelights Installation Instructions Parasol Cellular Shades Cordless Operable Sidelights CONTENTS Getting Started: Product View...1 Tools and Fasteners Needed...2 Installation: Installation Overview... Mount the

More information

1/4 FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE 1400A-1700A-1800A

1/4 FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE 1400A-1700A-1800A 1/4 FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE 1400A-1700A-1800A F AB GLASS AND MIRROR www.fabglassandmirror.com Call: +1 888-474-2221 Fax: (614)-334-4919 Office Timing: 8:30-18:00 EST info@fabglassandmirror.com

More information

InstallatIon InstructIons for 2-lIte PatIo Door unassembled

InstallatIon InstructIons for 2-lIte PatIo Door unassembled InstallatIon InstructIons for -lite PatIo Door unassembled tools & materials You will need: Measuring Tape Pencil Shims Drill & Drill bits: 6", 8", 5 6", 7 6" Utility Knife High-Performance Premium Silicone

More information