CNC router cutters & chucks

Transcription

1 CNC router cutters & chucks Products Page Universal assembly supports for chucks 176 CNC chucks 176~180 Precision collets Cutter arbor MK2 chucks 183 olid carbide spiral bits 184~190 CNC straight cutters 191~197 CNC profiled cutters 198~201 lot & mortise bits 202~208

2 aw blades Precision chucks and collets The ideal accessories for machining centres, point-to-point machines and CNC routers. - extreme precision and reliability; - perfect tool centering; - defect-free rotation; - made from extremely high resistant steel; - precision grinding on all jointed parts; - extreme high rotation performance >= 15 HP RPM; - interchangeable collet clamps with radial grooves for secure parallel tool clamping; - wide clamping tolerance (-0.7); - right or left-hand rotation chucks with self clamping threads; - clamping nut with Woodruff radial grooves for c-spanners; - practical withdrawal sleeves with double differential threads for the chuck spindle; & ets - for very efficient sizing on extreme unprecedented high feed speed; - excellent finishing quality on the workpiece and longer tool life; - sturdy design with reduced height to increase the work space between the machine and the piece; - safe and fast tool setup; - central hexagonal low profile for easy tool clamping through a c-spanner; - designed and tested in collaboration with the most renowned machining and CNC router construction centres; - delivered in a smart professional packaging. ndustrial owel rills Universal assembly supports for chucks 183 ECRPTON Universal assembly supports for chucks HK-F HK Universal assembly supports for chucks O O For HK-F63 and O30 chucks CMT now offers new universal assembly supports for HK-F63 and O30 chucks. Thanks to the bidirectional roller bearings, which clamp the toolholder to the flange, the system offers the highest protection to the tool taper and clamps are no longer needed. The special bidirectional roller bearing clamps the toolholder to the flange, offering the highest protection to the tool taper. pare Parts HK chuck for ER32 precision collets To be used with collet eft-hand rotation HK-F63 ER For Homag, Eima from 9/94, ubus, Weeke, Biesse, CM, Morbidelli and Masterwood machines. H isplay Cabinets 176

3 O30 chucks for ER32 precision collets To be used with collet Retaining stud eft-hand rotation O 30 ER32 Ø H aw blades For Biesse machines To be used with collet Retaining stud H eft-hand rotation O 30 ER32 Ø For Biesse machines with Omlat engine, Bulleri, Busellato, CM and MA machines. & ets To be used with collet For Alberti and Masterwood machines. Retaining stud eft-hand rotation O 30 ER32 Ø12, H ndustrial owel rills O30 chucks for ER32 precision collets To be used with collet Retaining stud H eft-hand rotation O 30 ER32 Ø8, For Morbidelli and CM machines To be used with collet Retaining stud eft-hand rotation O 30 ER32 Ø8, H pare Parts 55 For Morbidelli and CM machines (with aluminium flange already assembled Ø69,5). Ø69,5 Retaining stud and aluminium flange ECRPTON Ø69,5 aluminium flange isplay Cabinets 177

4 aw blades Chucks for ER32 precision collets /100 To be used with collet eft-hand rotation MK2/M30x1,5 ER MK3/M30x1,5 ER H 62 MK2/MK3 tapered shank & ets Chucks for ER32 precision collets To be used with collet For machines with P euco system Retaining stud Ø25x55 ER32 P EUCO ndustrial owel rills pare Parts isplay Cabinets Clamping nuts for chucks with ER32 collets M40x1,5 Ø C-panner for ER32 precision collets ECRPTON eft-hand rotation Clamping nut without bearing For /100/200/250/300/400 chucks Clamping nut with bearing For /100/200/250/300/400 chucks ECRPTON C-panner for ER32 precision collets H 178

5 HK chucks for ER40 precision collets To be used with collet eft-hand rotation HK-F63 ER H aw blades 77 For Homag, Eima, MA from 9/94, ubus, Weeke, Biesse, CM, Morbidelli and Masterwood machines. O30 chucks for ER40 precision collets 57 Clamping nuts for chucks with ER40 precision collets M50x1,5 Ø C-spanner for ER40 precision collets For Biesse machines. ECRPTON eft-hand rotation Clamping nut without bearing For /211/221/310 chucks Clamping nut with bearing For /211/221/310 chucks To be used with collet Retaining stud ECRPTON O30 ER40 Ø To be used with collet Retaining stud O30 ER40 Ø For Biesse machines with Omlat engine, Bulleri, Busellato, CM and MA machines To be used with collet For Alberti and Masterwood machines. Retaining stud O30 ER40 Ø12, C-panner for ER40 precision collet H & ets ndustrial owel rills pare Parts isplay Cabinets 179

6 aw blades HK chuck for N6388 precision collet To be used with collet HK-F63 N For Homag, Eima from 9/94, ubus, Weeke, Biesse, CM, Morbidelli & Masterwood machines. pare parts Clamping nut with bearing & ets ndustrial owel rills N6388 precision collets TECHNCA ETA: - replaceable td N6388 collets (from 6 to 25) - fit most tapered spindle noses ,5 wide clamping tolerance - suitable for most conical chucks. REMARK: special dimensions available on request pare Parts Clamping nuts M48x2 Ø ECRPTON Clamping nut without bearing Clamping nut with bearing isplay Cabinets C-panner for N6388 & ER ECRPTON C-panner for Usag

7 ER20 precision collets xxx ER25 precision collets xxx TECHNCA ETA: - replaceable td ER20 collets (from 3 to 12,7) - fit most tapered spindle noses ,7 wide clamping tolerance - suitable for most conical chucks. REMARK: special dimensions available on request TECHNCA ETA: - replaceable td ER25 collets (from 6 to 16) - fit most tapered spindle noses ,7 wide clamping tolerance - suitable for most conical chucks. REMARK: special dimensions available on request ER32 precision collets for /100/200/250/300/400 chucks TECHNCA ETA: - replaceable td ER32 collets (from 3 to 20) - fit most tapered spindle noses ,7 wide clamping tolerance - suitable for most conical chucks. REMARK: special dimensions available on request , , , aw blades & ets ndustrial owel rills ER40 precision collets for /211/221/310 chucks TECHNCA ETA: - replaceable td ER40 collets (from 4 to 25) - fit most tapered spindle noses ,7 wide clamping tolerance - suitable for most conical chucks. REMARK: special dimensions available on request pare Parts isplay Cabinets 181

8 aw blades & ets ndustrial owel rills pare Parts isplay Cabinets 182 Cap nuts for CNC machines Ø20x14 F.1 M30x1,5 38 spanner M33x3 Cap nuts for router machines Ø20x14 F.1 M30x1, x7gg O30 retaining studs nternal thread For machines with M33x3 threaded spindle nose eft-hand rotation Ø20x14Fx1" M30x1, nternal thread Cutter arbor with HK tapered shank 100 tandard Optional 3 Flange For machines with 1-1/8 x7 threaded spindle nose eft-hand rotation Ø20x14Fx1" M30x1, ECRPTON 1 2 H H Retaining stud for /201 Biesse chucks Retaining stud for /211 Biesse, Omlat, Bulleri, Busellato, CM and MA chucks Retaining stud for /221 Alberti-Masterwood chucks 9 12, Retaining stud for /251 CM - Morbidelli chucks 6,5 8, Retaining stud for P and euco chucks M For Homag, Eima from 9/94, ubus, Weeke, Biesse, CM, Morbidelli and Masterwood machines Cutter arbor with O30 tapered shank HK-F63 Ø30x HK-F63 Ø35x HK-F63 Ø40x For Biesse machines. REMARK: special dimensions available on request O 30 Ø30x pare parts for chucks ECRPTON M6x25 TCE screw teel flange for with Ø30 arbors - Male M teel flange for with Ø35 arbors - Male M teel flange for with Ø40 arbors - Male M ECRPTON Optional teel flange for with Ø30 arbors - Female teel flange for with Ø35 arbors - Female teel flange for with Ø40 arbors - Female H H F F F

9 aw blade arbor with parallel shank 97, H Pin Hole /M6/48 97, pare parts M6x10 TCE screw allen key aw blades Collet chucks clamp with MK2 tapered shank 123 eft-hand rotation MK2/Ø20x14Fx H & ets 62 ndustrial owel rills Collets for 123 chucks 31 C-spanner 3 Clamping nuts M30x1,5 Ø , , ECRPTON ECRPTON eft-hand rotation Clamping nut Type Usag c-spanner , H pare Parts isplay Cabinets 183

10 aw blades & ets ndustrial owel rills pare Parts isplay Cabinets harp technology with a new twist A special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the edges last longer. ncreased feed rate and improved cutting quality for enhanced productivity with CMT! olid carbide upcut spiral bits HARNE HV CMT CARBE C2 C2 MCRON TRANVERE RUPTURE N/ 2 TECHNCA ETA: - 1 spiral cutting edge [Z1] - Provide an excellent finish on the lower side of the workpiece - Upward chip ejection C1 MG30 UBMCRON ,18 12,7 50,8 6, ,76 15,87 50,8 6, ,35 19,05 50,8 6, ,35 25,4 63,5 6, ,52 28,57 76,2 9, HWM Z1 APPCATON: used for cutting, copying, panel sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. 184

11 olid carbide up & downcut spiral bits Z HWM Z2+2 Z ,52 28,6 7 76,2 9, ,7 25, ,2 12, ,7 28, ,2 12, ,7 34, ,9 12, ,7 41, ,6 12, aw blades 1 up & downcut mortising bits 9,52 22,2 4,8 76,2 9, ,52 25,4 5,2 76,2 9, , ,7 22,2 5,2 76,2 12, ,7 34,9 5,2 88,9 12, & ets TECHNCA ETA: spiral cutting edges [Z2+2] spiral cutting edges [Z3+3] - Provide an excellent finish on both the upper and the lower side of the workpiece. APPCATON: used for cutting, copying, panel sizing and any routing application on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. olid carbide upcut spiral bits HWM Z4 ndustrial owel rills TECHNCA ETA: - 4 spiral cutting edges (2 with chip-breaker) [Z2+2R] - Max 0.1 tooth depth - Provide excellent finish on the lower side of the workpiece - Upward chip ejection pare Parts APPCATON: used for ripping, template routing, panel sizing and any routing application on solid wood and wood composites. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. The special 4 flute design (Z2 finishing + Z2R with chipbreaker) allows high speed with excellent finish on the workpiece. isplay Cabinets 185

12 olid carbide upcut spiral bits with chip-breaker aw blades 195 HWM Z3R H eft-hand rotation & ets ,7 38,1 88,9 12, , ,5 15, , ,5 19, ndustrial owel rills TECHNCA ETA: - 3 spiral cutting edges [Z3R] - Chip breaker teeth - Max 0.3 tooth depth - Provide an excellent finish on the lower side of the workpiece - Upward chip ejection APPCATON: used for ripping, template routing, panel sizing and any routing application on solid wood, or wood composites. Can be used at a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. olid carbide downcut spiral bits with chip-breaker 196 HWM Z3R H eft-hand rotation pare Parts ,7 38,1 88,9 12, , ,5 15, , ,5 19, TECHNCA ETA: - 3 spiral cutting edges [Z3R] - Chip breaker teeth - Max 0.3 tooth depth - Provide excellent finish on the upper side of the workpiece - ownward chip ejection. isplay Cabinets APPCATON: used for ripping, template routing, panel sizing and any routing application on solid wood and wood composites. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. 186

13 olid carbide upcut spiral bits 193 TECHNCA ETA: - 3 spiral cutting edges [Z3] - Provide an excellent finish on the lower side of the workpiece - Upward chip ejection HWM Z3 H eft-hand rotation aw blades & ets APPCATON: used for ripping, template routing, panel sizing and any routing application on solid wood, or wood composites. Can be used at a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. ndustrial owel rills olid carbide spiral bits downcut 194 HWM Z3 H eft-hand rotation pare Parts TECHNCA ETA: - 3 spiral cutting edges [Z3] - Provide an excellent finish on the upper side of the workpiece - ownward chip ejection APPCATON: used for ripping, template routing, panel sizing and any routing application on solid wood, wood composites, plastic materials and laminates. Can be used at a high feed speed on small, difficult to clamp workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. isplay Cabinets 187

14 olid carbide upcut spiral bits aw blades 191 HWM Z2 & ets ndustrial owel rills pare Parts ,18 12,7 50,8 6, , ,97 12,7 50,8 6, ,76 19,05 50,8 6, ,35 19,05 50,8 6, ,35 25,4 63,5 6, ,94 25,4 76,2 12, ,52 31,75 76,2 12, ,7 31,75 76,2 12, ,7 38,1 88,9 12, ,7 50,8 101,6 12, , ,5 15, , ,5 19, TECHNCA ETA: - 2 spiral cutting edges [Z2] - Provide an excellent finish on the lower side of the workpiece - Upward chip ejection APPCATON: used for ripping, template routing, panel sizing and any routing application on solid wood, wood composites, plastic materials and laminates. Can be used at a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. isplay Cabinets 188

15 olid carbide downcut spiral bits ,18 12,7 50,8 6, ,97 12,7 50,8 6, ,76 19,05 50,8 6, ,35 19,05 50,8 6, ,35 25,4 63,5 6, ,94 25,4 76,2 12, ,52 31,75 76,2 12, ,7 31,75 76,2 12, ,7 38,1 88,9 12, ,7 50,8 101,6 12, HWM Z2 aw blades & ets ndustrial owel rills TECHNCA ETA: - 2 spiral edges [Z2] - Provide an excellent finish on the upper side of the workpiece - ownward chip ejection APPCATON: used for ripping, template routing, panel sizing and any routing application on solid wood, wood composites, plastic materials and laminates. Can be used at a high feed speed on small, difficult to clamp work pieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. isplay Cabinets pare Parts 189

16 aw blades & ets olid carbide upcut spiral bits with chip-breaker for locksets * * * * The 95 length is achieved in 2-3 passes. TECHNCA ETA: - 3 spiral cutting edges [Z3R] - Chip breaker teeth - Max 0.3 tooth depth - Provide an excellent finish on the lower side of the workpiece - Upward chip ejection APPCATON: used for ripping, template routing, panel sizing and any routing application on solid wood, or wood composites. Can be used at a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. HWM Z3R ndustrial owel rills olid carbide upcut with spiral bits chip-breaker for 60 V-point locksets / HWM Z3R pare Parts isplay Cabinets olid carbide upcut spiral bits without chip-breaker for 60 V-point locksets /163 TECHNCA ETA: - 3 spiral cutting edges [Z3] - Provide an excellent finish on the lower side of the workpiece - Upward chip ejection APPCATON: used for ripping, template routing, panel sizing and any routing application on solid wood, or wood composites. Can be used at a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors HWM Z3 190

17 piral bits with insert knives and chip-breaker for locksets /95* * The 95 length is achieved in 3-4 passes. NERT CARBE Z2R pare parts 23x7x1.5 2-RT HW-HC knives R 23x7x1.5 3-RT HW-HC knives R M3x4 T9 Torx screw T9 Torx key aw blades TECHNCA ETA: - uper strength steel (heavy-duty material) - 2 cutting edges [Z2R] - Chip-breaker teeth APPCATON: used for ripping, template routing, panel sizing and any routing application on solid wood, or wood composites. Can be used at a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. & ets traight router cutters with insert knives 653 TECHNCA ETA: - uper strength steel - 2 cutting edges [Z1+1] pare knives side top NERT CARBE Z ,3 91, ,3 111, ,3 111, ,3 111, pare parts 7,5x12x1,5 knife ,6x12x1,5 knife ,3x12x1,5 knife ,3x12x1,5 knife M3,5x3,5 Torx screw M4x3,5 Torx screw M4x6 Torx screw T15 Torx key ndustrial owel rills pare Parts APPCATON: straight router bit with one replaceable plunging knife and one side knive fixed by special Torx screws. The body is precise balanced. For finishing and routing, plunge cutting and grooving in boards materials (laminated chipboards, MF) and hardwood. For use on CNC machining centres. isplay Cabinets 191

18 P router cutters with shear angle aw blades 141 Z P Z1+1 Z x x * x TECHNCA ETA: - uper strength steel - P cutting edge - HW plunging tip for diagonal plunge-cutting - Resharpenable cutter (max 3 times) - Max feed speed 4 m/min 40 ONGER FE THAN CARBE APPCATON: to be used on all CNC routers for jointing and sizing of solid wood and wood-based panels ndustrial owel rills pare Parts isplay Cabinets & ets * Z1+1 CONTRUCTON FOR TEM P router cutters with shear angle 140 TECHNCA ETA: - uper strength steel - P cutting edge - HW plunging tip for diagonal plunge-cutting (Z-axis tool entrance) - Resharpenable cutter (max 3 times) - Max feed speed 5 m/min Z P Z x (3 P+1 HW) x (4 P+1 HW) , ,7x (3 P+1 HW) , ,7x (4 P+1 HW) , ,87x (3 P+1 HW) , ,87x (5 P+1 HW) x (3 P+1 HW) x (4 P+1 HW) x (3 P+1 HW) x (4 P+1 HW) x (5 P+1 HW) , ,05x (3 P+1 HW) , ,05x (5 P+1 HW) x (3 P+1 HW) x (4 P+1 HW) x (5 P+1 HW) x (6 P+1 HW) APPCATON: to be used on all CNC routers for jointing, rabbeting, grooving and copying of raw material, melamine and laminates, MF, HP and veneered panels. 40 ONGER FE THAN CARBE 192

19 P router cutters with shear angle 142 TECHNCA ETA: - uper strength steel - P cutting edge - HW plunging tip for diagonal plunge-cutting (Z-axis tool entrance) - Resharpenable cutter (max 3 times) - Max feed speed 10 m/min Z P Z x (6 P+1 HW) x (8 P+1 HW) x (10 P+1 HW) x (12 P+1 HW) ONGER FE THAN CARBE aw blades APPCATON: to be used on all CNC routers for jointing, rabbeting, grooving, copying and dividing cuts of raw material, melamine and laminates, MF, HP and veneered panels. & ets P spiral router cutters with shear angle ndustrial owel rills 143 Z P Z x50 3 (12 P+1 HW) x50 3 (15 P+1 HW) x50 3 (18 P+1 HW) x50 3 (20 P+1 HW) x50 3 (21 P+1 HW) x50 3 (24 P+1 HW) x50 3 (27 P+1 HW) x50 3 (29 P+1 HW) x50 3 (30 P+1 HW) pare Parts TECHNCA ETA: - uper strength steel - P cutting edge - HW plunging tip for diagonal plunge-cutting (Z-axis tool entrance) - Resharpenable cutter (max 6 times) - Max feed speed 25 m/min 40 ONGER FE THAN CARBE APPCATON: to be used on all CNC routers for jointing, rabbeting, grooving, copying and dividing cuts of raw material, melamine and laminates, MF, HP and veneered panels. High performance on pre-and finish-routing. On request isplay Cabinets 193

20 olid carbide router cutters aw blades HWM Z TECHNCA ETA: - 2 radial relief cutting edges [Z2] & ets Router cutters ndustrial owel rills pare Parts isplay Cabinets 8 HW plunge centre tip TECHNCA ETA: - uper strength steel - 2 precision ground HW cutting edges and 1 HW plunge centre tip [Z2+1] APPCATON: used for drilling, grooving or jointing on solid wood and wood composites. Can be used on machining centres, CNC routers and hand-held routers equipped with chucks or adaptors. 174 HW Z

21 olid carbide router cutters 9,5 112 * uper strength steel * 2 precision ground HW cutting edges [Z2+1] HW HWM Z , , , , , , , , * , * , * , * , aw blades & ets HW plunge centre tip Router cutters 12 HW plunge centre tip TECHNCA ETA: - 2 radial relief cutting edges [Z2+1] TECHNCA ETA: - uper strength steel - 2 precision ground HW cutting edges and 1 HW plunge centre tip [Z2+1] HW Z2+1 APPCATON: used for grooving, jointing and routing on solid wood, wood composites, plastic materials and laminates. ndustrial owel rills pare Parts isplay Cabinets 195

22 Router cutters aw blades HW HWM Z2+1 & ets HW plunge centre tip HWM HW Z2+1 ndustrial owel rills TECHNCA ETA: - 2 radial relief cutting edges [Z2] - 1 HW [Z1] plunge centre tip APPCATON: for grooving, jointing and routing on solid wood, wood composites, plastic materials and laminates pare Parts HW Z2+1 isplay Cabinets TECHNCA ETA: - uper strength steel - 2 precision ground HW cutting edges and 1 HW plunge centre tip [Z2+1] APPCATON: used for grooving, jointing and general routing operation on solid wood, wood composites, plastics and laminates. Can be used on machining centres, CNC routers and hand-held routers. HW plunge centre tip 196

23 Router cutters for drywall openings TECHNCA ETA: - uper strength steel - 2 alternating precision ground HW [Z1+1] HW Z1+1 APPCATON: ideal for cutting openings for electrical boxes and similar operation on solid wood, wood composites, plastics and laminates. Can be used on machining centres, CNC routers and hand-held routers equipped with chucks or adaptors. aw blades 50 & ets poilboard surfacing router cutters with insert knives NERT CARBE Z V2 ndustrial owel rills pare parts 12x12x1,5 knife M4x6 Torx T15 screw T15 Torx key x14x2 knife M6x10 TCE screw allen key TECHNCA ETA: - uper strength steel - 2 cutting edges [Z2] - 2 scores knives [V2] pare Parts APPCATON: new router bit for CNC router ideal for fast removal of material over a large surface area leaving an improved finish at the bottom of the cut. Used on soft and hardwood, particle board and MF. The cutter uses 4-sided inserts. Cost effective solution compared to brazed router bits and solid carbide spiral bits. rawings are 1:2 scale isplay Cabinets 197

24 aw blades & ets Adjustable chamfering CNC cutter _Max 45 TECHNCA ETA: tool body in steel, two TC reversible knives in swiveling blade carriers. Cutting on periphery and both sides. wiveling range towards top 0-45, toward bottom 0-90, infinitely variable adjustment according to precise scale. With positive stops at 7,5 through adjustment aide. No displacement of adjusted beveling angle when replacing blades. Righ rotation. A NERT CARBE pare parts 40x12x1,5 knife x6x12 wedge M6x8 TE screw (4x2 threaded pin) hex key Kit with 2 wedges and 1 screw for blocking rotation M8x25 TCE screw M8 nut (4) T hex key Z2 APPCATON: for jointing, rebating and chamfering of solid wood and wooden boards. uitable for CNC router machines and stationary router machine with manual or mechanical feed. -max pare Parts 20 ndustrial owel rills isplay Cabinets 198 V-groove - folding - signmaking CNC router cutters with insert knives NERT CARBE Z1 pare parts 36x12x1,5 knife M3,5x7 Torx screw T15 Torx key TECHNCA ETA: - uper trength steel - 1 cutting edges [Z1] APPCATON: This innovative CNC router bit offers you an endless range of possibilities for V-Groove, miter folds, signmaking, lettering and chamfer edges. The tool mounts a high grade HWM reversible knife ideal for general purpose, chipboard and plywood, but a higher quality is available for laminated and MF material. 25 max

25 Complete set for decorating and engraving NERT CARBE This unique system includes a tool body with 22 profile knives designed for multiple applications on your CNC routers. deal for MF, laminates, veneers, plastic, wood and solid surface materials. Z2 aw blades TECHNCA ETA: - Knives 20x20x2 - We recoend to re-sharpen the knives on the profiled cutting edges. 20 R R3,5 R3 R3, R5 R4 R2,5 R3 R3R ndustrial owel rills & ets R5 R4 R3 R R4 R4 1 4 R R5 R6 R3,5 4 7 R3, pare Parts R2 R3 R4 R5 R6 R7,5 rawings are 1:1 scale ECRPTON Complete set for decorating and engraving Remark: tool body and insert knives can be sold individually. pare parts isplay Cabinets 199

26 aw blades Complete set for MF doors NERT CARBE Z2 Open some new doors with CMT. Our 4-piece set includes the most popolar profile to make MF panel doors for kitchens and bathrooms. Each bit is made from bar stock steel and is equipped with 5 differents profile knives allowing enormous possibilities for easy and economical construction. The highest materials, the lowest tolerance in balancing and the precision in the sharpening of the knives let you obtain a smooth finish on your CNC machine. & ets pare parts T15 Tork key M3,5x5 Torx screw M4x6 Torx screw M3,5x7 Torx screw tandard Profile No B ndustrial owel rills 615.A1 615.C rawings are 1:1 scale pare Parts 95 Body A Body C 90 Body B 95 Body isplay Cabinets ECRPTON Complete set for MF doors (Profile no. 1)

27 Complete set for MF doors insert knives for optional profiles Optional Profile No. 2 aw blades 615.B2 615.A2 615.C Profile No & ets 615.A3 615.C3 615.B ndustrial owel rills 48.7 Profile No B A4 615.C4 5 R pare Parts Profile No A5 615.C rawings are 1:1 scale isplay Cabinets 201