CMT CARBIDE HARDNESS HV 10 C2 MICRON

Size: px

Start display at page:

Download "CMT CARBIDE HARDNESS HV 10 C2 MICRON"

Terence Clark
6 years ago
Views:

aw blades Tools with bore & Knives Router Bits & ets CNC Router Cutter & Chucks ndustrial owel rills Bits for Hand pare Parts & Accessories isplay Cabinets harp technology with a new twist A special

1 aw blades Tools with bore & Knives Router Bits & ets CNC Router Cutter & Chucks ndustrial owel rills Bits for Hand pare Parts & Accessories isplay Cabinets harp technology with a new twist A special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the edges last longer. ncreased feed rate and improved cutting quality for enhanced productivity with CMT! olid carbide upcut spiral bits new new HARNE HV CMT CARBE C2 C2 MCRON TRANVERE RUPTURE N/ 2 TECHNCA ETA: - 1 spiral cutting edge [Z1] - Provide an excellent finish on the lower side of the workpiece - Upward chip ejection C1 MG30 UBMCRON ORER NO ,18 12,7 50,8 6, ,76 15,87 50,8 6, ,35 19,05 50,8 6, ,35 25,4 63,5 6, ,52 28,57 76,2 9, HWM Z1 RH APPCATON: used for cutting, copying, panel sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors

olid carbide up & downcut spiral bits 190 1 Z HWM Z2+2 Z3+3 RH ORER NO. 8 32 7 80 8 2+2 190.080.11 9,52 28,6 7 76,2 9,52 2+2 190.504.11 10 32 7 80 10 2+2 190.100.11 12 42 7 90 12 2+2 190.120.

11 18 55 30 110 18 2+2 190.180.11 aw blades Tools with bore & Knives 1 new new up & downcut mortising bits 9,52 22,2 4,8 76,2 9,52 2+2 190.513.11 9,52 25,4 5,2 76,2 9,52 3+3 190.813.

2 olid carbide up & downcut spiral bits Z HWM Z2+2 Z3+3 RH ORER NO ,52 28,6 7 76,2 9, ,7 25, ,2 12, ,7 28, ,2 12, ,7 34, ,9 12, ,7 41, ,6 12, aw blades Tools with bore & Knives 1 new new up & downcut mortising bits 9,52 22,2 4,8 76,2 9, ,52 25,4 5,2 76,2 9, , ,7 22,2 5,2 76,2 12, ,7 34,9 5,2 88,9 12, Router Bits & ets TECHNCA ETA: spiral cutting edges [Z2+2] spiral cutting edges [Z3+3] - Provide an excellent finish on both the upper and the lower side of the workpiece. APPCATON: used for cutting, copying, panel sizing and any routing application on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. CNC Router Cutter & Chucks olid carbide upcut spiral bits 197 ORER NO HWM Z4 RH ndustrial owel rills Bits for Hand TECHNCA ETA: - 4 spiral cutting edges (2 with chip-breaker) [Z2+2R] - Max 0.1 tooth depth - Provide excellent finish on the lower side of the workpiece - Upward chip ejection pare Parts APPCATON: used for ripping, template routing, panel sizing and any routing application on solid wood and wood composites. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. The special 4 flute design (Z2 finishing + Z2R with chipbreaker) allows high speed with excellent finish on the workpiece. & Accessories isplay Cabinets 185

olid carbide upcut spiral bits with chip-breaker aw blades 195 ORER NO. HWM Z3R RH H ORER NO. eft-hand rotation Tools with bore & Knives Router Bits & ets 8 32 80 8 195.081.11 195.081.12 8 42 90 8 195.

3 olid carbide upcut spiral bits with chip-breaker aw blades 195 ORER NO. HWM Z3R RH H ORER NO. eft-hand rotation Tools with bore & Knives Router Bits & ets ,7 38,1 88,9 12, , ,5 15, , ,5 19, CNC Router Cutter & Chucks ndustrial owel rills TECHNCA ETA: - 3 spiral cutting edges [Z3R] - Chip breaker teeth - Max 0.3 tooth depth - Provide an excellent finish on the lower side of the workpiece - Upward chip ejection APPCATON: used for ripping, template routing, panel sizing and any routing application on solid wood, or wood composites. Can be used at a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. olid carbide downcut spiral bits with chip-breaker Bits for Hand 196 ORER NO. HWM Z3R RH H ORER NO. eft-hand rotation pare Parts ,7 38,1 88,9 12, , ,5 15, , ,5 19, & Accessories TECHNCA ETA: - 3 spiral cutting edges [Z3R] - Chip breaker teeth - Max 0.3 tooth depth - Provide excellent finish on the upper side of the workpiece - ownward chip ejection. isplay Cabinets APPCATON: used for ripping, template routing, panel sizing and any routing application on solid wood and wood composites. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors

4 olid carbide upcut spiral bits with chip-breaker 193 TECHNCA ETA: - 3 spiral cutting edges [Z3] - Provide an excellent finish on the lower side of the workpiece - Upward chip ejection ORER NO. HWM Z3 RH H ORER NO. eft-hand rotation aw blades Tools with bore & Knives Router Bits & ets APPCATON: used for ripping, template routing, panel sizing and any routing application on solid wood, or wood composites. Can be used at a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. CNC Router Cutter & Chucks ndustrial owel rills olid carbide spiral bits downcut with chip-breaker 194 HWM Z3 RH H ORER NO. ORER NO. eft-hand rotation Bits for Hand pare Parts TECHNCA ETA: - 3 spiral cutting edges [Z3] - Provide an excellent finish on the upper side of the workpiece - ownward chip ejection APPCATON: used for ripping, template routing, panel sizing and any routing application on solid wood, wood composites, plastic materials and laminates. Can be used at a high feed speed on small, difficult to clamp workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. & Accessories isplay Cabinets 187

5 olid carbide upcut spiral bits aw blades 191 ORER NO. HWM Z2 RH Tools with bore & Knives Router Bits & ets CNC Router Cutter & Chucks ndustrial owel rills Bits for Hand pare Parts ,18 12,7 50,8 6, , ,97 12,7 50,8 6, ,76 19,05 50,8 6, ,35 19,05 50,8 6, ,35 25,4 63,5 6, ,94 25,4 76,2 12, ,52 31,75 76,2 12, ,7 31,75 76,2 12, ,7 38,1 88,9 12, ,7 50,8 101,6 12, , ,5 15, , ,5 19, TECHNCA ETA: - 2 spiral cutting edges [Z2] - Provide an excellent finish on the lower side of the workpiece - Upward chip ejection & Accessories APPCATON: used for ripping, template routing, panel sizing and any routing application on solid wood, wood composites, plastic materials and laminates. Can be used at a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. isplay Cabinets 188

6 olid carbide downcut spiral bits 192 ORER NO ,18 12,7 50,8 6, ,97 12,7 50,8 6, ,76 19,05 50,8 6, ,35 19,05 50,8 6, ,35 25,4 63,5 6, ,94 25,4 76,2 12, ,52 31,75 76,2 12, ,7 31,75 76,2 12, ,7 38,1 88,9 12, ,7 50,8 101,6 12, HWM Z2 RH aw blades Tools with bore & Knives Router Bits & ets CNC Router Cutter & Chucks ndustrial owel rills TECHNCA ETA: - 2 spiral edges [Z2] - Provide an excellent finish on the upper side of the workpiece - ownward chip ejection APPCATON: used for ripping, template routing, panel sizing and any routing application on solid wood, wood composites, plastic materials and laminates. Can be used at a high feed speed on small, difficult to clamp work pieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. Bits for Hand isplay Cabinets & Accessories pare Parts 189

aw blades Tools with bore & Knives Router Bits & ets CNC Router Cutter & Chucks olid carbide upcut spiral bits with chip-breaker for locksets 150 95 45 195 ORER NO. 14 95* 150 14 195.142.

7 aw blades Tools with bore & Knives Router Bits & ets CNC Router Cutter & Chucks olid carbide upcut spiral bits with chip-breaker for locksets ORER NO * * * * The 95 length is achieved in 2-3 passes. TECHNCA ETA: - 3 spiral cutting edges [Z3R] - Chip breaker teeth - Max 0.3 tooth depth - Provide an excellent finish on the lower side of the workpiece - Upward chip ejection APPCATON: used for ripping, template routing, panel sizing and any routing application on solid wood, or wood composites. Can be used at a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. HWM Z3R RH ndustrial owel rills Bits for Hand olid carbide upcut with spiral bits chip-breaker for 60 V-point locksets /163 ORER NO HWM Z3R RH pare Parts & Accessories isplay Cabinets 60 olid carbide upcut spiral bits without chip-breaker for 60 V-point locksets /163 TECHNCA ETA: - 3 spiral cutting edges [Z3] - Provide an excellent finish on the lower side of the workpiece - Upward chip ejection APPCATON: used for ripping, template routing, panel sizing and any routing application on solid wood, or wood composites. Can be used at a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. ORER NO HWM Z3 RH 190

8 FREE ECOA HW NTEGRAE Z=3 (sgrossatura) HW PRA ROUTER CUTTER Z=3 (rough cut) APPCAZONE/APPCATON: Forare e contornare su legno massiccio e suoi derivati (truciolare - MF -HF). For boring and sizing on solid wood, chipboard and fibre materials (MF - HF). MACCHNA/MACHNE: NFORMAZON TECNCHE/TECHNCA NFORMATON: Esecuzione in HW integrale micrograno. i costruiscono con 3 taglienti ad elica spingente. Finitura migliore sul lato superiore del pannello. carico del truciolo verso il basso. Manufactured with micrograin solid carbide. With 3 negative spiral cutting edges for face side up workpieces. Chip evacuation towards the bottom. ECA PNGENTE / OWN-CUT PRA x/rh - Z=3 x/h - Z=3 Codice Codice Prezzo Codice Codice Prezzo Code Price Code Code Price Code G C G M H M E E B G E A E M B G H C B H F C A G C26 30

9 FREE ECOA HW NTEGRAE Z=3 PER ERRATURE O HW PRA ROUTER CUTTER Z=3 FOR OCK-CAE ART ART APPCAZONE/APPCATON: Realizzazione asole per incasso serrature porte. For cutting of lock-cases and face-plates in doors. MACCHNA/MACHNE: NFORMAZON TECNCHE/TECHNCA NFORMATON: Esecuzione in HW integrale micrograno. i costruiscono con 3 taglienti ad elica traente con o senza rompitruciolo. carico del truciolo verso l`alto. Manufactured with micrograin solid carbide. With 3 positive spiral cutting edges with or without chip-breaker. Upward chip evacuation. ECA TRAENTE / UP-CUT PRA Art x/rh - Z = 3 Art x/rh - Z=3 Codice Codice Prezzo Codice Codice Prezzo Code Price Code Code Price Code G E E F H G24 31

10 FREE ECOA HW NTEGRAE Z=2 (finitura) O HW PRA ROUTER CUTTER Z=2 (finish cut) APPCAZONE/APPCATON: Forare e contornare su legno massiccio e suoi derivati (truciolare - MF -HF). For boring and sizing on solid wood, chipboard and fibre materials (MF - HF). MACCHNA/MACHNE: NFORMAZON TECNCHE/TECHNCA NFORMATON: Esecuzione in HW integrale micrograno. i costruiscono con 2 taglienti ad elica traente per ottima finitura sul lato inferiore del pannello. carico del truciolo verso l`alto. Manufactured with micrograin solid carbide. With 2 positive spiral cutting edges for an excellent finishing on the bottom of the workpiece. Upward chip evacuation. ECA TRAENTE / UP-CUT PRA x/rh - Z=2 x/h - Z=2 Codice Codice Prezzo Codice Codice Prezzo Code Price Code Code Price Code B G B C H F A E A M B A F M B F H C F B E A B H F A A G F C23 25

11 FREE ECOA HW NTEGRAE Z=3 (sgrossatura) HW PRA ROUTER CUTTER Z=3 (rough cut) APPCAZONE/APPCATON: Forare e contornare su legno massiccio e suoi derivati (truciolare - MF -HF). For boring and sizing on solid wood, chipboard and fibre materials (MF - HF). MACCHNA/MACHNE: NFORMAZON TECNCHE/TECHNCA NFORMATON: Esecuzione in HW integrale micrograno. i costruiscono con 3 taglienti ad elica traente. Finitura migliore sul lato inferiore del pannello. carico del truciolo verso l`alto. Manufactured with micrograin solid carbide. With 3 positive spiral cutting edges for face side down workpieces. Upward chip evacuation. ECA TRAENTE / UP-CUT PRA x/rh - Z=3 x/h - Z=3 Codice Codice Prezzo Codice Codice Prezzo Code Price Code Code Price Code G C G M H M E E B G E A E M B G H C B H F C A G C H M30 29

12 FREE ECOA HW NTEGRAE Z=2 (finitura) O HW PRA CUTTER Z=2 (finish cut) APPCAZONE/APPCATON: Forare e contornare su legno massiccio e suoi derivati (truciolare - MF -HF). For boring and sizing on solid wood, chipboard and fibre materials (MF - HF). MACCHNA/MACHNE: NFORMAZON TECNCHE/TECHNCA NFORMATON: Esecuzione in HW integrale micrograno. i costruiscono con 2 taglienti ad elica negativa per ottima finitura sul lato superiore del pannello. carico del truciolo verso il basso. Manufactured with micrograin solid carbide. With 2 negative spiral cutting edges for an excellent finishing on the top of the workpiece. Chip evacuation towards the bottom. ECA PNGENTE / OWN-CUT PRA x/rh - Z=2 x/h - Z=2 Codice Codice Prezzo Codice Codice Prezzo Code Price Code Code Price Code B G B C H F A E A M B A F M B F H C F B E A B H F A A G F C23 26

13 FREE ECOA HW NTEGRAE Z=2+2 A OPPA ECA O HW PRA ROUTER CUTTER Z=2+2 UP OWN PRA APPCAZONE/APPCATON: Contornatura di pannelli in truciolare, MF - HF nobilitati e laminati. izing of paper, plastic coated, veneered chipboard or MF-HF panels. MACCHNA/MACHNE: NFORMAZON TECNCHE/TECHNCA NFORMATON: Esecuzione in HW integrale micrograno. i costruiscono con 2+2 taglienti ad eliche contrapposte per ottima finitura su entrambi i lati del pannello. Manufactured with micrograin solid carbide. With 2+2 up-down spiral cutting edges for excellent finishing on top and bottom workpiece faces. ECHE CONTRAPPOTE / UP-OWN PRA x/rh - Z = 2+2 x/h - Z = 2+2 Codice Codice Prezzo Codice Codice Prezzo Code Price Code Code Price Code (16+16) (16+16) 72 M (16+16) 72 H (16+16) 72 C (15+27) 100 A (15+27) 100 H (15+27) 100 G (15+27) 100 F (15+37) (15+37) 100 H (15+27) (15+27) 100 A (15+37) 100 F (15+37) 100 C (15+27) 100 F (15+27) (15+37) (15+37) 100 H (27+48) 125 B (27+48) 125 A (15+37) 100 H (15+37) 100 G (15+37) 100 A (15+37) 100 M (12+63) 120 C (12+63) 120 B26 33

14 FREE ECOA HW NTEGRAE Z=3 (finitura) O HW PRA ROUTER CUTTER Z=3 (finish cut) APPCAZONE/APPCATON: Forare e contornare su legno massiccio e suoi derivati (truciolare - MF -HF). For boring and sizing on solid wood, chipboard and fibre materials (MF - HF). MACCHNA/MACHNE: NFORMAZON TECNCHE/TECHNCA NFORMATON: Esecuzione in HW integrale micrograno. i costruiscono con 3 taglienti ad elica traente per ottima finitura sul lato inferiore del pannello. carico del truciolo verso l`alto. Manufactured with micrograin solid carbide. With 3 positive spiral cutting edges for an excellent finishing on the bottom of the workpiece. Upward chip evacuation. ECA TRAENTE / UP-CUT PRA x/rh - Z=3 x/h - Z=3 Codice Codice Prezzo Codice Codice Prezzo Code Price Code Code Price Code M E E E H G M C B A G B H M F C M H F G B E A A H F25 27

15 ART ART FREE ECOA HW NTEGRAE Z=3 PER FORO MANGA O HW PRA ROUTER CUTTER Z=3 ATCHOE AN KEYHOE APPCAZONE/APPCATON: Realizzazione del foro chiave e maniglia per porte. For plunge-cutting of latcholes and keyholes on door manufacturing. MACCHNA/MACHNE: NFORMAZON TECNCHE/TECHNCA NFORMATON: Esecuzione in HW integrale micrograno. i costruiscono con 3 taglienti ad elica traente con o senza rompitruciolo. carico del truciolo verso l`alto. Manufactured with micrograin solid carbide. With 3 positive spiral cutting edges with or without chip-breaker. Upward chip evacuation ECA TRAENTE / UP-CUT PRA Art x/rh - Z = 3 Art x/rh - Z=3 Codice B Codice Prezzo Codice B Codice Prezzo Code B Price Code Code B Price Code B B F B A E C

16 FREE ECOA HW NTEGRAE Z=3 (finitura) O HW PRA CUTTER Z=3 (finish cut) APPCAZONE/APPCATON: Forare e contornare su legno massiccio e suoi derivati (truciolare - MF -HF). For boring and sizing on solid wood, chipboard and fibre materials (MF - HF). MACCHNA/MACHNE: NFORMAZON TECNCHE/TECHNCA NFORMATON: Esecuzione in HW integrale micrograno. i costruiscono con 3 taglienti ad elica negativa per ottima finitura sul lato superiore del pannello. carico del truciolo verso il basso. Manufactured with micrograin solid carbide. With 3 negative spiral cutting edges for an excellent finishing on the top of the workpiece. Chip evacuation towards the bottom. ECA PNGENTE / OWN-CUT PRA x/rh - Z=3 x/h - Z=3 Codice Codice Prezzo Codice Codice Prezzo Code Price Code Code Price Code M E E E H G M C B A G B H M F C M H F G B E A A H23 28

Catalog 2014/2015. The Perfect 10! Rated the #1 Overall Router Bits

Catalog 2014/2015. The Perfect 10! Rated the #1 Overall Router Bits Catalog 2014/2015 aw blades & knives s ndustrial pare parts isplay cabinets WOO CHOCE R O U T E R Magazine The Perfect 10! Rated the #1 Overall Router Bits B T Welcome to the 2014/2015 catalog ear customer,