2016/2017 THE WIDEST TOOLING RANGE. Catalogue. Overall Rating 10! Top Performing Router Bits. English edition. Jig Saw Blades. Tools for Multi-Cutters

Transcription

1 abre Router its & ets Cutters & Chucks owel rills aws Accessories Catalogue English edition 2016/2017 THE WET TOONG RANGE Overall Rating 10! Top Performing Router its 1994

2 Welcome to the 2016/2017 catalogue ear Customer, Thank you for your interest in CMT products. Take a moment to browse our new catalogue and choose from a wider range of innovative and state-of-the-art woodworking tools, from router bits, saw blades, jig and sabre saw blades, hole saws, and boring bits to oscillating tools, CNC cutters, cutter heads, chucks, power tools, and so much more! A detailed list of spare parts on each product category is also provided to guide you through your purchase. We continually strive to develop our technical know-how and invest in research and development, but our priority is customer care. A satisfied customer is worth more than any other achievement, therefore each page of this catalog contains CMT s highest coitment to the professional woodworker. hould you not find a product that suits your needs, please let us know. Our highly skilled engineers and design technicians are always keen to assist you with your woodworking operations. Thank you for your interest in CMT Orange Tools. Your CMT Team

3 6 /6TP 150/4.3 Abbreviations A = Cutting angle α = Hook angle AT = Alternate top bevel grind = ore diameter β = Type of grind COM3 = Pin- 2/7/42 + 2/9/46,4 + 2/10/60 COM5 = Pin- 2/7/ /8,4/ /14/ /9/ /19/120 COM7 = Pin- 2/10/80 + 1/11/85 + 2/11/ /11/ /14/ /14/ /19/120 d = mall cutting diameter = iameter 2 = Overall diameter 3 = For shank diameter Ø = iameter FFT = Flat flat trapezoidal FTG = Flat top grind FWF = Flat with alternate chamfer H = Cutting depth HF = Hollow ground teeth = Cutting length 1 = hort cutting length nches K 1 H MAT MTCG P PTFE R R1 RH RPM 1 T1 TCG V Z = nches = Kerf thickness = Overall length = Working length = Adjusting length = eft-hand rotation = Alternate top bevel with chamfer grind = Triple chip grind (trapezoidal) with chamfer = Millimeters = Plate thickness = Non-stick industrial coating, black and orange = Radius = Radius = = Round per minute = hank diameter = hank diameter = Thickness / Maximum joint thickness = Triple chip grind (trapezoidal) = purs = Number of teeth = On request = olid tungsten carbide THE RGHT TOO FOR THE ET REUT! Quick reference charts and pictograms help you choose the right tools for your application. JT144 HC Fast WOO JT101R HC Fine WOO 6 /6TP 6 /6TP 150/4.3 6 /8-14TP J644 J611F 150/ J123XF J641HM 150/19 HC Top WOO M Heavy WOO & META JT127 H pecial AU M Progressive META HW pecial FER & PATER JT141HM HW pecial FER & PATER AW AE JG AW AE ARE AW AE MUT-CUTTER HOE AW WOO CARE WOO & META META -META AUMNUM MUT-MATERA PATC MAONRY AMON PECA

4 owel rills PROUCT PAGE Adaptors 254~256 XTreme olid Carbide oring its XTreme oring its olid Carbide Twist rills Flute owel rills Flute owel rills 266~268 owel rills with Countersink 269 Through owel rills Countersinks 272 Hinge oring its owel rills with Threaded hank 275~277

5 Adaptors ORER NO. ORER NO. eft-hand rotation 8 16 M ,5 M RH H abre 25 For use on the following machines: Nottmeyer (older models). pare parts For use on the following machines: Ayen, Holzma, Knoevenagel, Mayer, Torwegge. ORER NO. pare parts ORER NO. eft-hand rotation 8 16 M ,5 M RH H Router its & ets ORER NO. RH H ORER NO. eft-hand rotation owel rills 28, M10/ ,5 M10/ For use on the following machines: Alberti (older models). alestrini, ilek, usellato (older models). chleicher, Vitap (older models). pare parts ORER NO. RH H ORER NO. eft-hand rotation 25, M8/ ,5 M8/ For use on the following machines: alestrini, ilek. pare parts isplay Cabinets & pare Parts 254

6 Adaptors Ø ORER NO. ORER NO. eft-hand rotation 8 16 M10/ ,5 M10/ For use on the following machines: iesse (older models). Masterwood (Zangheri & oschetti). Morbidelli, Torwegge, Vitap (new design). Weeke. pare parts RH H abre 358 RH H Ø For use on the following machines: Masterwood (Zangheri & oschetti). Morbidelli, Nottmeyer (new design). ORER NO. ORER NO. eft-hand rotation 8 16 M8/ ,5 M8/ pare parts Router its & ets 359 ORER NO. RH H ORER NO. eft-hand rotation 10 19,5 M For use on the following machines: cheer. pare parts owel rills For use on the following machines: For iesse machines with quick drill change attachment. ORER NO. ORER NO. eft-hand rotation pare parts RH H isplay Cabinets & pare Parts 255

7 Adaptors ORER NO. Right-hand & eft-hand rotation For use on the following machines: Vitap. pare parts H RH abre ORER NO. Right-hand & eft-hand rotation 10 19, For use on the following machines: Morbidelli. pare parts H RH Router its & ets owel rills ORER NO. Right-hand & eft-hand rotation 10 19, For use on the following machines: Masterwood, Maggi, Griggio. pare parts H RH isplay Cabinets & pare Parts Ø8 M5 ORER NO. Right-hand & eft-hand rotation For use on the following machines: Weeke. pare parts H RH H RH ECRPTON ORER NO. Right-hand & eft-hand rotation Retaining screw for Weeke machines

8 aw blades NEW OWNCUT ROUN HARPENNG Angle edge etting a new standard for performance and value TANAR HARPENNG Flat edge saw blades abre saw blades EXTRA-FNE MCROGRAN CARE TANAR CARE multi-cutters Reduced boring surface for faster feed speed tandard boring surface Tools with bore The Finest Quality Micrograin Carbide CMT makes the finest quality cutting edges. Produced by Ceratizit in uxembourg, CMT s carbide tips are selected among many carbide grades to ensure longer endurance and higher impact resistance. Micrograin Carbide harpening harpening on the carbide cutting edges provides a 0,4µ/ micrograin finish. This is processed on automated CNC machines equipped with as many as 6 axes for maximum accuracy Router bits & sets CNC router cutter & chucks P.T.F.E. Coating CMT s P.T.F.E. coating provides a non-stick surface preventing any residue accumulation on the bit body. aked on at 420, this unique industrial material is specifically designed to fit woodworking tool requirements. Highly-Resistant teel ody Our bit bodies and shanks are machined from solid bar stock steel made by Von Moos teel in witzerland. The main mechanical properties are: - superior strength - high level uniformity - minimal distortion - exceptional resistance to fatigue and abrasion. pecial Metal hock Resistant razing Micrograin carbide tips are applied with a special brazing compound. This allows a higher brazing temperature than other methods and guarantees a solid bond of every tip on every bit. teel hank Grinding CMT grinds the steel shank to a micrograin finish of 0,8µ/. The smooth finish on the shank determines how well the drills fit into your machine. Rough grinding results in a poor chuck grip and in a poor wobbly rotation. dowel drills its for hand power tools saw blade Power tools & accessories isplay cabinets & spare parts 257

9 abre Router its & ets owel rills olid Carbide owel rills Min. 25 Max 35 Min. 25 Max 45 XTreme harpening new new / /22 HWM HWM Z2 ORER NO. Z2 ORER NO. V2 V2 RH RH H ORER NO. eft-hand rotation 1,3 5 57,5 10x * ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,35 (1/4 ) 22 57,5 10x ,5 10x ,5 10x * oring bit for panel preboring. uitable for both right-hand and left-hand rotation. - Premium quality super-strength steel. - HWM spiral portion with centre point. - 2 cutting edges [Z2]. - 2 spiral flutes. - 2 curved, negatively ground spurs [V2]. - Parallel shank with driving flat and adjustable screw length. H ORER NO. eft-hand rotation 1, x * x x x x x ,35 (1/4 ) x x x * oring bit for panel preboring. uitable for both right-hand and left-hand rotation. pare parts pare parts used on boring machines separately or with chucks for drilling blind holes in solid wood, wood composites, plastic and laminated materials. Perfect for all materials and long-lasting performance! Grinding Wheels for XTreme harpening ECRPTON MENON ORER NO. Ø3 a 7 Grinding wheel for resharpening Ø125x5,5 Ø Ø8 a 10 Grinding wheel for resharpening Ø125x7 Ø isplay Cabinets & pare Parts Ø20 Ø

10 olid Carbide owel rills for Through s Min. 25 Max 30 new /22 HWM Z2 RH H ORER NO. ORER NO. eft-hand rotation x x x x x x For panels with maximum in thickness - Premium quality super-strength steel. - HWM spiral portion with centre point. - 2 precision ground cutting edges [Z2]. - ouble angle. - 2 spiral flutes. - Parallel shank with driving flat and adjustable screw length. pare parts used on boring machines and dowel drilling devices. Use for drilling through holes in solid wood, wood composites, plastic and laminated materials abre XTreme harpening Router its & ets olid Carbide owel rills new 382 H RH - Premium quality HWM. - Cutting head with precision balanced centre point. - 1 cutting edge [Z1]. - Parallel shank with driving flat and length adjusting screw. pare parts for drilling blind holes on solid wood, wood composites, plastic and laminated materials. For use on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors. ecurity tips: these boring bits require more power compared to tradition dowel drills. The number of boring bits to be used in a single drilling unit depends on the machine power. HWM ORER NO. Right-hand & eft-hand rotation ,5 10x x42, , ,5 10x , x ,5 10x x , ,5 10x , x ,5 10x x Z1 owel rills isplay Cabinets & pare Parts 259

11 owel rills /42 HW Z2 V2 RH H abre 27 ORER NO. ORER NO. eft-hand rotation ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x Premium quality super-strength steel. - piral portion coated with orange or black P.T.F.E. - Extra-fine micrograin carbide spiral portion with centre point. - 2 cutting edges [Z2]. - 2 spiral flutes. - 2 curved, negatively ground spurs [V2]. - Parallel shank with driving flat and adjustable screw length. pare parts owel rills used on boring machines separately or with chucks for drilling blind holes in solid wood, wood composites, plastic and laminated materials. Router its & ets /42 HW Z2 V2 RH H ORER NO. ORER NO. eft-hand rotation x x x x x x owel rills - Premium quality super-strength steel. - piral portion coated with orange or black P.T.F.E. - Extra-fine micrograin carbide spiral portion with centre point. - 2 cutting edges [Z2]. - 2 spiral flutes. - 2 curved, negatively ground spurs [V2]. - Parallel shank with driving flat and adjustable screw length. pare parts used on boring machines separately or with chucks for drilling blind holes in solid wood, wood composites, plastic and laminated materials. Perfect for all materials and long-lasting performance! CMT announces the new series of solid carbide boring bits, now available from their extensive industrial line. These bits are entirely made of premium quality super micrograin carbide from Ceratizit in uxemburg. isplay Cabinets & pare Parts XTreme harpening The entire series offers several design features: - the unique tip has curved, negatively ground spurs to produce exceptionally clear bores with no rough -edges. Centre point balanced; - the cylindrical head is bigger than traditional tips and is extremely resistant to prolonged use. t lasts longer between sharpenings; - the plunge edge runs all the way to the centre of the bit to reduce drilling resistance and increase production speed; - the solid carbide construction guarantees an almost infinite number of resharpenings, and since it is a solid unit of carbide, it offers extra safety features; - ideal for hardwood and difficult composites such as particle boards, MF and veneered wood. - excellent performance on high-speed boring units and CNC routers. 260

12 owel rills for Through s /42 HW Z2 RH H ORER NO. ORER NO. eft-hand rotation ,5 10x ,5 10x For panels with maximum 20 in thickness pare parts owel rills for Through s 26 - uper-strength steel. - piral portion coated with orange or black P.T.F.E. - Extra-fine micrograin carbide spiral portion with centre point. - HW head with precision balanced centre point. - 2 precision ground cutting edges [Z2]. - ouble angle. - 2 spiral flutes. - Parallel shank with driving flat and length adjusting screw /42 For panels with maximum 30 in thickness - uper-strength steel. - piral portion coated with orange or black P.T.F.E. - Extra-fine micrograin carbide spiral portion with centre point. - HW head with precision balanced centre point. - 2 precision ground cutting edges [Z2]. - ouble angle. - 2 spiral flutes. - Parallel shank with driving flat and length adjusting screw. used on boring machines and dowel drilling devices. Use for drilling through holes in solid wood, wood composites, plastic and laminated materials. HW Z2 RH H ORER NO. ORER NO. eft-hand rotation x x x x x pare parts used on boring machines and dowel drilling devices. Use for drilling through holes in solid wood, wood composites, plastic and laminated materials. abre Router its & ets owel rills Perfect for all materials and long-lasting performance! CMT announces the new series of solid carbide boring bits, now available from their extensive industrial line. These bits are entirely made of premium quality super micrograin carbide from Ceratizit in uxemburg. XTreme harpening The entire series offers several design features: - the unique tip has curved, negatively ground spurs to produce exceptionally clear bores with no rough -edges. Centre point balanced; - the cylindrical head is bigger than traditional tips and is extremely resistant to prolonged use. t lasts longer between sharpenings; - the plunge edge runs all the way to the centre of the bit to reduce drilling resistance and increase production speed; - the solid carbide construction guarantees an almost infinite number of resharpenings, and since it is a solid unit of carbide, it offers extra safety features; - ideal for hardwood and difficult composites such as particle boards, MF and veneered wood. - excellent performance on high-speed boring units and CNC routers. isplay Cabinets & pare Parts 261

13 abre Adaptors for Twist rills ORER NO x , x x , x , x x , x x For use with the following items: 363 HWM pare parts - uper-strength steel. - Quick and secure assembly on twist drills. - Precision relief. - Parallel shank with driving flat and length adjusting screw Router its & ets owel rills ushings for Twist rills for use with twist drills with coon shank and bushing diameter. Used on boring machines equipped with adaptor chucks. 365 ORER NO , , , , For use with the following items: 363 HWM - uper-strength steel. - hank with driving flat. - Axial cuttings for cylindrical drill clamps. used with spiral boring bits with shank diameters equal to the bushing diameter. Used on boring machines equipped with adaptors. isplay Cabinets & pare Parts 262

14 olid Carbide Twist rills V Point harpening V Point 120 V Point olid Carbide Twist rills Negatively Ground purs harpening X-Treme harpening new new new new = 363 = For use with the following items: Premium quality HWM. - 2 precision ground cutting edges [Z2]. - 2 spiral flutes. - Coon shank and drilling diameter (=). used in adaptor bushings. 364 Adaptors Adaptors ORER NO. ORER NO. ORER NO. eft-hand rotation ORER NO. eft-hand rotation 2, Assembly llustration HWM Z2 RH H 120 Through s , , , , Through 2, , HWM Z2 RH H abre Router its & ets owel rills 363 Twist drills 365 ushings 363 Twist drills isplay Cabinets & pare Parts 263

15 abre Router its & ets 2 Flute owel rills HW Z2 V2 RH H ORER NO. ORER NO. eft-hand rotation ,5 10x , ,5 10x , ,5 10x ,5 10x , ,5 10x , ,5 10x , ,5 10x ,5 10x , ,5 10x , ,5 10x ,5 10x ,5 10x , ,5 10x ,5 10x , ,5 10x ,5 10x ,5 10x ,5 10x , ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x pare parts owel rills 2 Flute owel rills uper-strength steel. - piral portion coated with orange or black P.T.F.E. - HW head with precision balanced centre point. - 2 HW precision ground cutting edges [Z2]. - 2 negatively ground spurs [V2] - 2 spiral flutes. - Parallel shank with driving flat and length adjusting screw. used on boring machines equipped with adaptors or chucks. Used to drill blind holes in solid wood, wood composites, plastic and laminated materials. HW Z2 V2 RH H ORER NO. ORER NO. eft-hand rotation ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x pare parts isplay Cabinets & pare Parts Negatively Ground purs 264

16 2 Flute owel rills 311 HW Z2 V2 RH H ORER NO. ORER NO. eft-hand rotation x , x , x x , x , x , x x , x , x x x , x x , x x x , x x , x x x x x pare parts abre Router its & ets 2 Flute owel rills uper-strength steel. - piral portion coated with orange or black P.T.F.E. - HW head with precision balanced centre point. - 2 HW precision ground cutting edges [Z2]. - 2 negatively ground spurs [V2]. - 2 spiral flutes. - Parallel shank with driving flat and length adjusting screw. used on boring machines equipped with adaptors or chucks. Used to drill blind holes in solid wood, wood composites, plastic and laminated materials. HW Z2 V2 RH H ORER NO. ORER NO. eft-hand rotation x x x x x x pare parts owel rills Negatively Ground purs isplay Cabinets & pare Parts 265

17 abre Router its & ets owel rills 4 Flute owel rills 20 4 Flute owel rills HWM HW HWM Z2 V2 RH H ORER NO. ORER NO. eft-hand rotation ,5 8x ,5 8x , ,5 8x ,5 8x , ,5 8x ,5 8x ,5 8x ,5 8x ,5 8x ,5 8x pare parts ORER NO. HW Z2 V2 RH H ORER NO. eft-hand rotation x , x x , x x x x , x x x uper-strength steel. - Cutter portion coated with black or orange P.T.F.E. - HW head with precision balanced centre point. - 2 HW precision ground cutting edges [Z2]. - Negatively ground spurs [V2]. - 4 spiral flutes. - Parallel shank with driving flat and length adjusting screw. pare parts used on boring machines equipped with adaptors or chucks. Used to drill blind holes in solid wood, wood composites, plastic and laminated materials. Negatively Ground purs isplay Cabinets & pare Parts 266

18 4 Flute owel rills 20 4 Flute owel rills uper-strength steel. - Cutter portion coated with black or orange P.T.F.E. - HW head with precision balanced centre point. - 2 HW precision ground cutting edges [Z2]. - Negatively ground spurs [V2]. - 4 spiral flutes. - Parallel shank with driving flat and length adjusting screw. HW Z2 V2 RH H ORER NO. ORER NO. eft-hand rotation ,5 10x ,5 10x ,5 10x , ,5 10x ,5 10x ,5 10x ,5 10x , ,5 10x ,5 10x ,5 10x ,5 10x , ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x pare parts ORER NO. used on boring machines equipped with adaptors or chucks. Used to drill blind holes in solid wood, wood composites, plastic and laminated materials. HW Z2 V2 RH H ORER NO. eft-hand rotation x x x , x x , x x x , x x x x , x x x x x pare parts abre Router its & ets owel rills Negatively Ground purs isplay Cabinets & pare Parts 267

19 abre 4 Flute owel rills 373 ORER NO. ORER NO. eft-hand rotation x x x x x x uper-strength steel. - Cutter portion coated with black or orange P.T.F.E. - HW head with precision balanced centre point. - 2 HW precision ground cutting edges [Z2]. - Negatively ground spurs [V2]. - 4 spiral flutes. - Parallel shank with driving flat and length adjusting screw. HW Z2 V2 RH H pare parts used on boring machines equipped with adaptors or chucks. Used to drill blind holes in solid wood, wood composites, plastic and laminated materials. Router its & ets owel rills 4 Flute owel rills uper-strength steel. - Cutter portion coated with black or orange P.T.F.E. - HW head with precision balanced centre point. - 2 HW precision ground cutting edges [Z2]. - Negatively ground spurs [V2]. - 4 spiral flutes. - Parallel shank with driving flat and length adjusting screw. HW Z2 V2 RH H ORER NO. used on boring machines equipped with adaptors or chucks. Used to drill blind holes in solid wood, wood composites, plastic and laminated materials. ORER NO. eft-hand rotation x x x x x x pare parts isplay Cabinets & pare Parts 268 Negatively Ground purs

20 owel rills with Countersink Ø HW Z2 V2 RH H ORER NO. ORER NO. eft-hand rotation , , , , , , , , abre Negatively Ground purs owel rills for Through s with Countersink 1 Ø uper-strength steel. - piral portion coated with orange or black P.T.F.E. - HW head with precision balanced centre point. - 2 precision ground cutting edges [Z2]. - 2 ground spurs [V2]. - 2 spiral flutes. - Parallel shank with driving flat and length adjusting screw. 1 - uper-strength steel. - piral portion coated with orange or black P.T.F.E. - HW head with precision balanced centre point. - 2 precision ground cutting edges [Z2]. - 2 ground spurs [V2]. - 2 spiral flutes. - Parallel shank with driving flat and length adjusting screw. pare parts HW Z2 V2 RH H ORER NO. ORER NO. eft-hand rotation , , pare parts used for drilling and countersinking in solid wood, wood composites, plastic and laminated materials. uitable for high performance speed on boring machines equipped with adaptors or chucks. used for drilling and countersinking in solid wood, wood composites, plastic and laminated materials. uitable for high performance speed on boring machines equipped with adaptors or chucks. Router its & ets owel rills 60 Through s isplay Cabinets & pare Parts 269

21 abre Router its & ets owel rills 2 Flute owel rills for Through s Flute owel rills for Through s 26 ORER NO. ORER NO. eft-hand rotation ,5 10x ,5 10x ,5 10x ,5 10x For panels with maximum 20 in thickness. - uper-strength steel. - piral portion coated with orange or black P.T.F.E. - HW head with precision balanced centre point. - 2 precision ground cutting edges [Z2]. - 2 spiral flutes. - Parallel shank with driving flat and length adjusting screw. used on boring machines and dowel drilling devices. Use for drilling through holes in solid wood, wood composites, plastic and laminated materials. 314 For panels with maximum in thickness. ORER NO. HW Z2 RH H pare parts HW Z2 RH H ORER NO. eft-hand rotation x , x x , x x , x x x x , x x x , x x x x x x For panels with maximum in thickness. pare parts isplay Cabinets & pare Parts 60 Through s - uper-strength steel. - piral portion coated with orange or black P.T.F.E. - HW head with precision balanced centre point. - 2 precision ground cutting edges [Z2]. - 2 spiral flutes. - Parallel shank with driving flat and length adjusting screw. used on boring machines and dowel drilling devices. Use for drilling through holes in solid wood, wood composites, plastic and laminated materials. 270

22 4 Flute owel rills for Through s 20/30 60 Through s Flute owel rills for Through s Through s new 381 For panels with maximum in thickness. ORER NO. ORER NO. eft-hand rotation ,5 10x ,5 10x ORER NO. ORER NO. eft-hand rotation x x x x x x x uper-strength steel - piral portion coated with orange or black P.T.F.E. - HW head with precision balanced centre point - 2 precision ground cutting edges [Z2] - 4 spiral flutes - Parallel shank with driving flat and length adjusting screw. used on boring machines and dowel drilling devices. Use for drilling through holes in solid wood, wood composites, plastic and laminated materials. 367 ORER NO. ORER NO. eft-hand rotation x x For panels with maximum in thickness. 368 For panels with maximum in thickness. For panels with maximum in thickness. ORER NO. ORER NO. eft-hand rotation x x x x For panels with maximum in thickness - uper-strength steel - piral portion coated with orange or black P.T.F.E. - HW head with precision balanced centre point - 2 precision ground cutting edges [Z2] - 2 spiral flutes - Parallel shank with driving flat and length adjusting screw. used on boring machines and dowel drilling devices. Use for drilling through holes in solid wood, wood composites, plastic and laminated materials. ORER NO. HW Z2 RH H pare parts HW Z2 RH H pare parts ORER NO. eft-hand rotation x x x x abre Router its & ets owel rills isplay Cabinets & pare Parts 271

23 Countersinks for 2 Flutes owel rills ORER NO. HW Z2 RH H ORER NO. eft-hand rotation 5 ~ ~ abre 2 For assembly on the shank of the drill. For use with the following parts: HW - uper-strength steel. - 2 precision ground carbide tipped cutting edges [Z2]. - irect clamp on the shank of the drills. pare parts Router its & ets owel rills Countersinks for 4 Flutes owel rills 2 15 For assembly on the spiral head of the bit. Adjustable depth. For use with the following parts: HW used for chamfering and drilling in solid wood, wood composites, plastic and laminated materials uper-strength steel. - 2 HW precision ground cutting edges [Z2]. used for drilling and chamfering in solid wood, wood composites, plastic and laminated materials. ORER NO. HW Z2 RH H ORER NO. eft-hand rotation pare parts isplay Cabinets & pare Parts 315 Countersinks Adaptors owel drills 315 Assembly llustration 316 Assembly llustration 315 Countersinks owel drills owel drills 316 Countersinks Adaptors 316 Countersinks owel drills 272

24 Hinge oring its 26 New construction with 1 centre point 1 new 317 ORER NO. ORER NO. eft-hand rotation 14 57,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x ,5 10x uper-strength steel. - Cutter portion coated with orange or black P.T.F.E. - HW head with precision balanced centre point. - 2 HW precision ground cutting edges [Z2]. - 2 negatively ground spurs [V2]. - Parallel shank with driving flat and length adjusting screw. HW Z2 V2 RH H pare parts ideal for hinges. Use on boring machines equipped with adaptors or chucks. Use for drilling accurate and clean-cut blind holes in solid wood, wood composites, plastic and laminated materials. abre Router its & ets P Hinge oring its ONG FE P Z2 V2 RH H ORER NO. ORER NO. eft-hand rotation ,5 10x ,5 10x owel rills x x uper-strength steel. - P head with precision balanced centre point. - 2 P precision ground cutting edges [Z2]. - 2 P negatively ground spurs [V2]. - Parallel shank with driving flat and length adjusting screw. ideal for hinges. Use on boring machines equipped with adaptors or chucks. Use for drilling accurate and clean-cut blind holes in wood composites, plastic and laminated materials. oring performance 20 times longer than HW materials. Remark: special dimensions available on request. pare parts 20 ONGER FE THAN CARE isplay Cabinets & pare Parts 273

25 abre Router its & ets owel rills isplay Cabinets & pare Parts 274 Hinge oring its 26 New construction with 1 centre point Hinge oring its with Chipbreaker for oring Machines ORER NO. ORER NO. eft-hand rotation x x x x x x x x x x x x x x x C - 369C HW Z2 V2 RH H ORER NO. ORER NO. eft-hand rotation x x x x x uper-strength steel. - Cutter portion coated with orange or black P.T.F.E. - HW head with precision balanced centre point. - 2 HW precision ground cutting edges [Z2]. - 2 negatively ground spurs [V2]. - Parallel shank with driving flat and length adjusting screw. ideal for hinges. Use on boring machines equipped with adaptors or chucks. Use for drilling accurate and clean-cut blind holes in solid wood, wood composites, plastic and laminated materials. HW Z2R V2 RH H ORER NO. ORER NO. eft-hand rotation ,5 10x C C 40 57,5 10x C C 45 57,5 10x C C x C C x C C x C C - uper-strength steel. - Cutter portion coated with orange or black P.T.F.E. - HW head with precision balanced centre point. - 2 HW precision ground cutting edges with chipbreaker [Z2R]. - 2 negatively ground spurs [V2]. - Parallel shank with driving flat and length adjusting screw. deal for hinges. Used on boring machines equipped with adaptors or chucks. For drilling accurate and clean-cut blind holes in solid wood. pare parts pare parts

26 owel rills with Threaded hank Ø9 20 owel rills with Threaded hank ORER NO. ORER NO. eft-hand rotation M M M M M For use on the following machines: Nottmeyer (older models) 346 ORER NO. ORER NO. eft-hand rotation M M M M M For use on the following machines: Ayen, Holzma, Knoevenagel, Mayer, Torwegge. - uper-strength steel. - HW head with precision balanced centre point. - 2 precision ground cutting edges [Z2]. - 2 ground spurs [V2]. - 4 spiral flutes. HW Z2 V2 RH H HW Z2 V2 RH H used on boring machines equipped with chucks. Used to drill blind holes in solid wood, wood composites, plastic and laminated materials. ORER NO. ORER NO. eft-hand rotation M8/ M8/ M8/ M8/ M8/ M8/ M8/ M8/ M8/ M8/ For use on the following machines: Masterwood (Zangheri & oschetti) Morbidelli, Nottmeyer (new design) - uper-strength steel. - HW head with precision balanced centre point. - 2 precision ground cutting edges [Z2]. - 2 ground spurs [V2]. - 4 spiral flutes. HW Z2 V2 RH H used on boring machines equipped with chucks. Used to drill blind holes in solid wood, wood composites, plastic and laminated materials. abre Router its & ets owel rills isplay Cabinets & pare Parts 275

27 abre Router its & ets owel rills owel rills with Threaded hank with Countersink Ø uper-strength steel. - HW head with precision balanced centre point. - 2 precision ground cutting edge [Z2]. - 2 ground spurts [V2]. - 2 spiral flutes. owel rills with Threaded hank without Countersink 25 ORER NO. ORER NO. eft-hand rotation M10/ M10/ M10/ M10/ M10/ M10/ M10/ M10/ M10/ M10/ M10/ M10/ M10/ M10/ M10/ M10/ M10/ M10/ M10/ M10/ used on boring machines equipped with chucks. Used to drill blind holes in solid wood, wood composites, plastic and laminated materials. HW Z2 V2 RH H HW Z2 V2 RH H ORER NO. ORER NO. eft-hand rotation M10/ M10/ M10/ M10/ M10/ M10/ M10/ M10/ M10/ M10/ isplay Cabinets & pare Parts M10/ M10/ M10/ M10/ M10/ uper-strength steel. - HW head with precision balanced centre point. - 2 precision ground cutting edges [Z2]. - 2 ground spurs [V2]. - 4 spiral flutes. used on boring machines equipped with chucks. Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.

28 owel rills with Threaded hank with Countersink Ø11 Ø uper-strength steel. - HW head with precision balanced centre point. - 2 precision ground cutting edges [Z2]. - 2 spiral flutes. - 2 ground spurs [V2]. owel rills with Threaded hank without Countersink ORER NO. ORER NO. eft-hand rotation M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x ORER NO. ORER NO. eft-hand rotation Ø M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x M10/11x uper-strength steel. - HW head with precision balanced centre point. - 2 precision ground cutting edges [Z2]. - 2 ground spurs [V2]. - 4 spiral flutes. HW Z2 V2 RH H used on boring machines equipped with chucks. Used to drill blind holes in solid wood, wood composites, plastic and laminated materials. HW Z2 V2 RH H used on boring machines equipped with chucks. Used to drill blind holes in solid wood, wood composites, plastic and laminated materials. abre Router its & ets owel rills isplay Cabinets & pare Parts 277

29 abre Router its & ets owel rills pecial owel rills HW Nr.... RH its TOO FEATURE TOO MATERA P steel QUANTTY AN ROTATON HANK - PARAE HANK WTH RVNG FAT Ø8x20 with driving flat and length adjusting screw Ø10x20 with driving flat and length adjusting screw - THREAE HANK M8 M10 M8 with seating Ø9x4 M10 with seating Ø11x4 M 8 with centring cone M10 with 30 centring cone - PARAE HANK Nr.... H its x A =... (pecify diameter and shank length)... (pecify other shank types) HOE FEATURE HOE TO PROUCE rawing 1 - lind hole with more than one diameter rawing 2 - lind hole with counter rawing 3 - Through hole with more than one diameter rawing 4 - Through hole with countersink MENON d x C... (pecify diameter and depth of first hole) x... (pecify diameter and depth of second hole)... (pecify countersink-angle) standard 45 olid wood MF/Melamine panels WORK MATERA Chipboard panels and hardwood... (pecify other materials) Machine data Manufacturer/Model... RPM... Feed speed (metres/minute)... rawing 1 rawing 2 rawing 3 rawing 4 isplay Cabinets & pare Parts 278 For orders, please fill out this form and fax it to: # or mail to: C.M.T. Utensili.p.A. - Via della Meccanica, s.n Pesaro, Fraz. Chiusa di Ginestreto - talia

30 PROUCT PAGE Adaptors nterchangeable oring its 281 oring its 282~285 Chisel & it ets 285 Plug Cutters & ets Forstner its 288 Rosette Cutters 289 rad Point its 290~293 its for Mafell & Festool Machines 291 Countersinks & rills 294~297

31 Adaptors with parallel shank for interchangeable bits RH H ORER NO. 8x ,5x ORER NO. eft-hand rotation abre 10x x x x For use with the following parts: 501 HW M12x1 - uper strength steel. - Parallel shank with driving flat and adjustable screw length. used on boring machines with adaptor chucks. Adaptors Router its & ets with parallel shank for quick change drills ORER NO. RH H ORER NO. eft-hand rotation 10x20 (with driving flat and screw) x35 (with driving flat and screw) For use with the following parts: 501 HW - uper strength steel. - Parallel shank with driving flat and adjustable screw length. pare parts owel rills M12x1 used on boring machines with adaptor chucks. Adaptors isplay Cabinets & pare Parts M12x1 Ø ORER NO. ORER NO. eft-hand rotation M10/11x M10/11x M10/11x For use with the following parts: 501 HW - uper strength steel. - Parallel shank with driving flat and adjustable screw length. RH used on boring machines with adaptor chucks. H 280

32 Adaptors 503 ORER NO. ORER NO. eft-hand rotation M10/ M10/ M10/ RH H For use with the following parts: 501 HW - uper strength steel. - Parallel shank with driving flat and adjustable screw length used on boring machines with adaptor chucks. abre Adaptors M12x1 534 ORER NO. MK2/Ø20x14F.x MK2/M30x1, RH 55 For use with the following parts: 501 HW - uper strength steel. used on CNC machines or hand-held routers equipped with adaptor chucks. Router its & ets M12x1 nterchangeable oring its with Threaded hank 501 ORER NO. HW Z2+2 RH H ORER NO. eft-hand rotation M12x M12x M12x M12x M12x M12x M12x M12x M12x M12x M12x M12x M12x M12x M12x M12x owel rills isplay Cabinets & pare Parts 281

33 abre Router its & ets owel rills oring its with Parallel hank 50/60 new 512 ORER NO x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x uper strength steel. - HW precision balanced centre point. - 2 HW precision ground cutting edges [Z2]. - 2 HW negatively ground spurs [V2]. - Parallel shank. HW Z2 V2 RH used for drilling blind holes in solid wood, wood composites and plastic laminate materials. deal for hinges. isplay Cabinets & pare Parts Piece oring it et for Hinges 512 HW Z2 V2 RH The perfect set for hinge work and other related applications. Machined from special high speed steel with micrograin carbide tips, these bits are available in diameters of 15, 20, 25, 30 and 35. afely packaged in a solid plastic box with glass front for easy storage and inventory. - uper strength steel. - HW precision balanced centre point. - 2 HW precision ground cutting edges [Z2]. - 2 HW negatively ground spurs [V2]. - Parallel shank. used for drilling blind holes in solid wood, wood composites and plastic laminated materials. deal for hinges. ECRPTON T AMETER ORER NO. 5-Piece oring it et for Hinges

34 oring its with Parallel hank ORER NO x x x x x x x x x x x x x x x x x x x x x P steel. - Precision balanced centre point. - 2 spurs [V2]. - 2 precision ground cutting edges [Z2]. - ong-lasting cutting performance. - Parallel shank. P Z2 V2 RH used for drilling blind holes in softwood. deal for hinges. abre owel rills Router its & ets 5-Piece oring it et for Hinges 512 P Z2 V2 RH The perfect set for hinge work and other related applications. Machined from special high speed steel, these bits are available in diameters of 15, 20, 25, 30 and 35. Precisely ground, sharpened with round shanks and safely packaged in a solid plastic box with glass front for easy storage and inventory. - P steel. - Precision balanced centre point. - 2 spurs [V2]. - 2 precision ground cutting edges [Z2]. - ong-lasting cutting performance. used for drilling blind holes in softwood. deal for hinges. ECRPTON T AMETER ORER NO. 5-Piece oring it et for Hinges isplay Cabinets & pare Parts 283

35 abre Router its & ets owel rills oring its with Parallel hank ORER NO ORER NO uper strength steel. - HW precision balanced centre point. - 2 HW precision ground cutting edges [Z2]. - 2 HW negatively ground spurs [V2]. - Parallel shank. HW Z2 V2 RH used for drilling blind holes in solid wood, wood composites and plastic laminated materials. deal for hinges. isplay Cabinets & pare Parts 284

36 oring its with Parallel hank ORER NO , uper strength steel. - HW precision balanced centre point. - 2 HW precision ground cutting edges [Z2]. - 2 HW negatively ground spurs [V2]. - Parallel shank. - (RH). HW Z2 V2 RH for use on drilling machines and hand-held routers in solid wood, wood composites and plastic laminated materials. deal for hinges and blind holes. abre Mortise Chisel & it ets 543 H Z1 RH ORER NO. inches inches 6,35 1/4 19 3/ / / ,5 3/8 19 3/ ,7 1/2 19 3/ ,8 5/8 19 3/ /4 19 3/ t s tough to beat the old faithful mortise and tenon joint for strength and accuracy, even with all the other joining options in the world of woodworking. t isn t the easiest joint to make, but for sure it helps to have the best quality tools in your shop. That s why we ve added a new selection of chisel and bit sets in all the popular sizes 6,35 (1/4 ) to 19 (3/4 ) diameter. These sets are for use on any standard drill press mortising attachment of mortising machines. Router its & ets owel rills ample of Chisel Mortiser isplay Cabinets & pare Parts 285

37 abre Router its & ets owel rills Plug Cutters d Z P RH ORER NO d inches inches inches inches Z ORER NO. 3/8 49/64 5-1/2 1/ /2 61/64 5-1/2 1/ /8 1-7/64 5-1/2 1/ /4 1-7/32 5-1/2 1/ /8 1-11/32 5-1/2 1/ /32 5-1/2 1/ /4 1-19/32 5-1/2 1/ /8 1-27/32 6-5/16 5/ /2 1-31/32 6-5/16 5/ /8 2-3/32 6-5/16 5/ /4 2-7/32 6-5/16 5/ /32 6-5/16 5/ Use our =16 bushing to increase the 13 shank (order no on page 303) - P steel. - ong lasting cutter performance. inches Max RPM oftwood Max RPM Hardwood < Ø16 5/ < Ø / > Ø / used to make plugs in hard and soft woods. Plug Cutters Ø21x14F H Z4 RH isplay Cabinets & pare Parts Ø25 - uper strength H steel. - 4 precision ground cutting edges [Z4]. - ong lasting cutter performance. ORER NO. 6,2 Ø21x14F Ø21x14F ,2 Ø21x14F Ø21x14F ,2 Ø21x14F Ø21x14F ,2 Ø21x14F used for cutting dowels. Remark: available on request. 286

38 oring it & Plug Cutter ets P RH /02/03 We offer a wide range of boring bits and plug cutters in the most popular diameters. f you need to bore or to make plugs in softwood these sets are exactly what you need! abre oring it & Plug Cutter et ET CONTAN ORER NO. oring it with Parallel hank oring it with Parallel hank oring it with Parallel hank oring it with Parallel hank Plug Cutter Plug Cutter Plug Cutter Plug Cutter Router its & ets oring it & Plug Cutter et ET CONTAN ET CONTAN ORER NO. oring it with Parallel hank oring it with Parallel hank oring it with Parallel hank oring it with Parallel hank Plug Cutter Plug Cutter Plug Cutter Plug Cutter oring it & Plug Cutter et ORER NO. oring it with Parallel hank oring it with Parallel hank oring it with Parallel hank oring it with Parallel hank Plug Cutter Plug Cutter Plug Cutter Plug Cutter owel rills isplay Cabinets & pare Parts 287

39 abre Forstner its ORER NO , inches inches P Z2 V2 RH inches ORER NO. 1/4 3-35/64 3/ /8 3-35/64 3/ /2 3-35/64 3/ /8 3-35/64 3/ /4 3-35/64 3/ /8 3-35/64 3/ /64 3/ /8 3-35/64 3/ /4 3-35/64 3/ /8 3-35/64 3/ /2 3-35/64 3/ /8 3-35/64 3/ /4 3-35/64 3/ /8 3-35/64 3/ /64 3/ /8 3-35/64 3/ Router its & ets owel rills toothed rim >=Ø25 Forstner it ets standard rim <Ø25 We offer a wide range of Forstner bits in the most popular diameters. These bits are available separately or in beautiful wooden sets. The high performance stagger tooth design on the bits with larger diameters allows for sharp holes with straight sides and flat bottoms. its available for drill presses, electric and cordless drills. uitable for working on any type of softwood. tandard Rim and Toothed Rim: tandard rims provide better guidance but tend to overheat. To overcome heat the larger diameters (>=Ø25) are designed with toothed rims. - uper strength P steel. - Precision balanced centre point. - 2 spurs [V2]. - 2 precision ground cutting edges [Z2]. - ong-lasting cutting performance. used to drill precise flat bottom holes with no chipping in any softwood thickness. P Z2 V2 RH isplay Cabinets & pare Parts ECRPTON HANK T AMETER ORER NO. 5 pcs. Router it et in clamshell Ø8-10 Ø pcs. Router it et in clamshell Ø8-10 Ø pcs. Router it et in clamshell Ø3/8 Ø1/4-1/2-3/ pcs. Router it et in clamshell Ø3/8 Ø1/4-3/8-1/2-5/8-3/4-7/ pcs. Router it et in plastic box Ø3/8 Ø1/4-3/8-1/2-5/8-3/4-7/ / /4-1-3/8-1-1/2-1-5/8-1-3/4-1-7/ /8

40 Rosette Cutters 531 Max RPM ORER NO ,5 9, ,3 9, ,3 9, ,3 9, ,5 9, , uper strength H steel. - 2 HW precision ground cutting edges [Z2]. - Parallel exagonal shank. - (RH). to be used on drill presses and drilling power tools at low RPMs (see table). We recoend clamping your workpiece mechanically during boring operations ,85 HW Z2 RH Top of hexagonal shank abre Router its & ets rawings are 1:1 scale owel rills isplay Cabinets & pare Parts 289

41 abre Router its & ets rad Point its ORER NO Hexagonal Hexagonal Hexagonal Hexagonal Hexagonal Hexagonal Hexagonal Hexagonal Hexagonal Hexagonal Hexagonal Hexagonal Hexagonal Hexagonal Hexagonal Hexagonal uper strength H steel. - Precision balanced centre point. - 1 precision ground cutting edge [Z1]. - 1 spiral flute. - 1 spur [V1]. - ong-lasting cutting performance. H Z1 V1 RH used for drilling deep holes in soft and hardwood. owel rills isplay Cabinets & pare Parts 290 rad Point its ORER NO x x x x x uper strength steel. - HW head with precision balanced centre point. - 2 precision ground cutting edges [Z2]. - 2 negatively ground spurs [V2]. - 2 spiral flutes 541 top Collars pare parts ORER NO top collars with precision clamping nut and key for quick and easy assembly. HW Z2 V2 RH for use on hand-held router to drill blind holes in solid wood, wood composites or plastic laminates.

42 owel rills for Mafell & Hand-Held Routers ORER NO HW Z2 RH abre These drill bits are made with high-strength steel in order to work with high speed rotation. They are perfect for boring all materials like solid wood, wood and composites, plastic and laminated with hand-held routers and MAFE machine model uper strength steel. - piral portion coated with black P.T.F.E. - HW precision balanced centre point. - 2 HW precision ground cutting edges [Z2]. - 2 spiral flutes. - Parallel shank with driving flat and length adjusting screw. pare parts isplay Cabinets & pare Parts Router its & ets Router its for omino Joining Machines by Festool 380 HWM owel rills - Premium quality super-strength steel. - piral portion coating with black P.T.F.E. - Extra-fine micrograin carbide spiral portion. - 2 cutting edges [Z2]. - 2 spiral flutes. FETOO HW HWM Z2 RH ORER NO M6x0,75 F M6x0,75 F M6x0,75 F M6x0,75 F M8x1 F M6x0,75 F M8x1 F M8x1 F M8x1 F for use on omino machines to rout slots on solid wood and wood composites. 291

43 abre rad Point its P H 517 P H Z2 RH P ORER NO uper strength P steel. - Precision balanced center point. - 2 precision ground cutting edges [Z2]. - 2 flutes. ORER NO. H P H - uper strength H steel. - Precision balanced center point. - 2 precision ground cutting edges [Z2]. - 4 flutes. Router its & ets used for drilling holes in softwood. used for drilling holes in soft and hardwood. ong-lasting cutting performance. owel rills rad Point it ets 517 H P Z2 RH 5-Piece rad Point it et An economical collection of the five most popular sized brad points - 4, 5, 6, 8 and 10. afely packaged in a reusable plastic case for easy storage and access. 8-Piece rad Point it et A complete collection of the most popular brad points in the most requested sizes - 3, 4, 5, 6, 7, 8, 9 and 10. afely packaged in a reusable plastic case for easy storage and access. isplay Cabinets & pare Parts 292 ECRPTON Z T AMETER ORER NO. 5-Pcs. H rad Point et 4 flutes (Ø ) Pcs. P rad Point et 2 flutes (Ø ) Pcs. H rad Point et 4 flutes (Ø ) Pcs. P rad Point et 2 flutes (Ø )

44 rill its for ANUA Hinges Ø ANUA no. d uper strength steel. - H steel. - 2 H precision ground cutting edges [Z2]. - 2 spiral flutes. H Z2 RH ORER NO. 9,5 3,8 5, ,8 5, ,8 6, ,5 6,3 7, ,7 7, ,7 8, ,8 9, Parallel hank with riving Flat ANUA no. d ORER NO. 9 3, x ,2 5, x ,2 6, x , x , x ,6 8, x ,2 8, x used for drilling blind holes in soft and hardwood. abre Router its & ets 1 rad Point its 516 H Z2 RH H - uper strength steel. - Precision balanced centre point. - 2 precision ground cutting edges [Z2]. - 2 spiral flutes. - Coon shank and cutting diameter (=). ORER NO. ORER NO. eft-hand rotation , , , , , , , , used for drilling holes in soft and hardwood. owel rills isplay Cabinets & pare Parts 293

45 abre Router its & ets Countersinks with Threaded hank Ø15 Ø15 Ø Countersinks with Threaded hank 351 ORER NO. HW Z2 RH H ORER NO. eft-hand rotation 3 M10/Ø11x M10/Ø11x M10/Ø11x uper strength steel. - 2 HW precision ground cutting edges [Z2]. - Quick and easy drill change. for use with spiral bits featuring parallel shank. ORER NO. pare parts ORER NO. eft-hand rotation 3 M10/ M10/ M10/ uper strength steel. - 2 HW precision ground cutting edges [Z2]. - Quick and easy drill change. for use with spiral bits featuring parallel shank. pare parts owel rills Adjustable Countersink d ORER NO. HW Z2 RH pare parts 3 ~ 7 11 ~ Max 8 Twist drills Ø3 Ø4 Ø5 Ø6 Ø7 Overall diameter Ø11 Ø12 Ø13 Ø14 Ø15 isplay Cabinets & pare Parts Premium quality HW. - 2 HW precision ground cutting edges [Z2]. - Quick and easy drill change. for use with spiral bits featuring parallel shank. Twist drills not included.

46 rill its with 45 Countersink et d A d 2 A ORER NO. pare parts HW Z2 RH A A A A pare parts crew Hex key - uper strength steel. - Countersink: 2 HW precision ground cutting edges [Z2]. used for drilling holes in soft, hardwood and wood composites. top collars with precision clamping nut for quick and easy assembly. The elrin protection sleeve lets you work without leaving marks on the workpiece. abre rill its with 90 Countersink et d A d top Collars with elrin leeve ORER NO. pare parts A A A A A pare parts crew Hex key - uper strength steel. - Countersink: 2 HW precision ground cutting edges [Z2]. - Countersink: 2 HW negatively ground spurs [V2]. used for drilling holes in soft, hardwood and wood composites. ORER NO top collars with precision clamping nut for quick and easy assembly. The elrin protection sleeve lets you work without leaving marks on the workpiece. HW Z2 V2 RH top collars with precision clamping nut for quick and easy assembly. The elrin protection sleeve lets you work without leaving marks on the workpiece. pare parts Router its & ets owel rills isplay Cabinets & pare Parts 295

47 abre 45 Countersink with Parallel hank d d 2 A ORER NO. - uper strength steel. - 2 HW precision ground cutting edges [Z2]. HW Z2 RH H ORER NO. eft-hand rotation pare parts hex key pare parts Router its & ets owel rills 90 Countersink with Parallel hank d 2 A ORER NO. pare parts pare parts hex key HW Z2 V2 RH d - uper strength steel. - 2 HW precision ground cutting edges [Z2]. - 2 HW negatively ground spurs [V2]. isplay Cabinets & pare Parts 296

48 90 Countersink with Parallel hank 521 HWM Z3 RH new ORER NO. 19, x uper strength steel. - 3 HWM precision ground cutting edges [Z3]. abre 90 rill it with Countersink for crew Joints new Router its & ets 10, ORER NO. 4,2 7, ,6 93, uper strength steel. - P steel. - 1 P precision ground cutting edge [Z1]. - 1 spiral flute. 2 P Z1 RH used for drilling blind holes in soft and hardwood. owel rills isplay Cabinets & pare Parts 297

49 lot & Mortise oring its 164 ORER NO M12x M12x M12x HW Z2 V2 RH - uper strength steel. - HW cutting head with precision balanced centre point. - 2 HW precision ground cutting edges [Z2]. - 2 negatively ground spurs [V2]. used for drilling blind holes in solid wood, wood composites, plastic and laminated materials. Used on slot and mortise machines equipped with chucks. abre 164 H Z2 V2 RH ORER NO M12x M12x M12x M12x ong lasting cutter performance. - H cutting head with precision balanced centre point. - 2 precision ground edges [Z2]. - 2 ground spurs [V2]. used for drilling blind holes in soft and hardwood. Used on slot and mortise machines equipped with chucks. Router its & ets lot & Mortise oring its d HW Z2 V2 RH ORER NO M12x M12x M12x M12x owel rills - uper strength steel. - 2 HW precision ground cutting edges [Z2]. - 2 negatively ground spurs [V2]. used for drilling and cutting mortise slots in solid wood, wood composites, plastic and laminated materials. isplay Cabinets & pare Parts 247

50 abre Router its & ets owel rills lot Mortising its with Chip-reaker 50 - ong-lasting cutting performance. - 2 H precision ground straight cutting edges with chip-breaker teeth [Z2R]. for cutting mortise slots in soft and hardwood. Used on machining centres equipped with chucks H Z2R ORER NO. RH H ORER NO. eft-hand rotation ORER NO. ORER NO. eft-hand rotation Machining eep lots Guide tep 1 tep 2 tep 3 6-Piece Mortising it ets deal for heavy mortise jobs. Made of super strength high speed steel and available in left-hand or right-hand rotation. afely packaged in a hardwood and glass box for protection, these sets are economical and a perfect addition to any workshop. H Z2R RH H isplay Cabinets & pare Parts 248 ORER NO. ORER NO. eft-hand rotation

51 Twisted lot Mortising its with Chip-reaker H Z2R RH H ORER NO. H Z2R RH ORER NO. eft-hand rotation ORER NO. H ORER NO. eft-hand rotation ong-lasting cutting performance. - 2 H precision ground twisted cutting edges with chip-breaker teeth [Z2R]. Machining eep lots Guide for cutting mortise slots in soft and hardwood. Used on machining centres equipped with chucks. RPM 3000~5000 abre Router its & ets tep 1 tep 2 tep 3 owel rills 6-Piece Mortising it ets deal for heavy mortise jobs. Made of super strength high speed steel and available in left-hand or right-hand rotation. afely packaged in a hardwood and glass box for protection, these sets are economical and a perfect addition to any workshop. H Z2R RH H ORER NO. ORER NO. eft-hand rotation isplay Cabinets & pare Parts 249

52 abre Reciprocating lot Mortising its ong-lasting cutting performance. - 4 H precision ground cutting edges [Z4]. H Z4 H RH ORER NO. Right-hand & eft-hand rotation used for cutting mortise slots in soft and hardwood. Used on machining centres equipped with chucks. isplay Cabinets & pare Parts Router its & ets Reciprocating lot Mortising its owel rills H Z4 H RH ORER NO. Right-hand & eft-hand rotation ong-lasting cutting performance. - 4 H precision ground cutting edges [Z4]. used for cutting mortise slots in soft and hardwood. Used on machining centres equipped with chucks. 250

53 Reciprocating lot Mortising its ong-lasting cutter performance. - 2 H precision ground cutting edges [Z2]. H Z2 H RH ORER NO. Right-hand & eft-hand rotation used for cutting mortise slots in soft and hardwood. Used on machining centres equipped with chucks. abre Router its & ets Reciprocating lot Mortising its H Z2 H RH ORER NO. Right-hand & eft-hand rotation owel rills ong-lasting cutter performance. - 2 H precision ground cutting edges [Z2]. used for cutting mortise slots in soft and hardwood. Used on machining centres equipped with chucks. isplay Cabinets & pare Parts 251

54 abre Reciprocating lot Mortising its H Z2 Z4 H RH ORER NO. Right-hand & eft-hand rotation ong-lasting cutter performance. - 2 or 4 H precision ground cutting edges [Z2-Z4]. Z isplay Cabinets & pare Parts Router its & ets owel rills lot Mortising its ORER NO. eft-hand rotation ong-lasting cutter performance. - 3 H precision ground cutting edges [Z3]. H Z3 RH H ORER NO. used for cutting mortise slots in soft and hardwood. Used in maching centres equipped with chucks. 252

55 Tel (0) Terätoimitus ehtinen Oy Tupalankatu AHT Finland