Ernest Bennett Saws Price List
|
|
|
- Thomasina McLaughlin
- 5 years ago
- Views:
Transcription
1 Ernest Bennett Saws Price List 2015
2 Contents Circular Saws Rip saws 3 Anti-kick rip saws 3 Spring set plate saws 4 General cross cut saws 4 Negative hook cross cut saws 5 Construction saws 5 Universal trimming and sizing saws 5 Panel sizing saws 6-7 Reverse taper scoring saws 8 Split scoring saws 8 Grooving saws 9 Kikukawa saws 10 Non-ferrous metal saws Plastic and upvc saws 12 Ferrous metal cutting saws 12 Steel insulation sandwich saws 12 Wide Bandsaws Ready for use swaged saws 13 HPG stellite tipped saws Bandsaw guides 16 Bandlube 16 Felt bandsaw pads 16 Tension gauges and back straight edges 16 Bandsaw maintenance guide 17 Knives Planer blades Serrated irons TCT turnover knives 21 Tersa knives 22 Centrofix knives 22 Centroloc knives 22 Centrostar knives 22 Tool room items TCT saw tips 23 Grinding wheels 24 Jointing stones 24 Ultrasonic cleaning fluid 24 Hydro grease guns and parts 25 Sharpening services Bandsaws Narrow bandsaws 27 TCT circular saws 27 Circular plate saws, HSS saws, Inserted tooth saws Machine knives and irons 29 Small tools 29 Notes Page 2
3 Knives Planer blades 3mm thick Length Width Thickness 60mm 30mm 3mm mm 30mm 3mm mm 30mm 3mm mm 30mm 3mm mm 30mm 3mm mm 30mm 3mm mm 30mm 3mm mm 30mm 3mm mm 30mm 3mm 7.43 Length Width Thickness 60mm 35mm 3mm mm 35mm 3mm mm 35mm 3mm mm 35mm 3mm mm 35mm 3mm mm 35mm 3mm mm 35mm 3mm mm 35mm 3mm mm 35mm 3mm 8.43 Length Width Thickness 60mm 38mm 3mm mm 38mm 3mm mm 38mm 3mm mm 38mm 3mm mm 38mm 3mm mm 38mm 3mm mm 38mm 3mm mm 38mm 3mm mm 38mm 3mm Length Width Thickness 1000mm 25mm 3mm mm 30mm 3mm mm 32mm 3mm mm 35mm 3mm mm 38mm 3mm mm 40mm 3mm Page 18
4 Planer blades 4mm thick Length Width Thickness 60mm 35mm 4mm mm 35mm 4mm mm 35mm 4mm mm 35mm 4mm mm 35mm 4mm mm 35mm 4mm mm 35mm 4mm mm 35mm 4mm mm 35mm 4mm 9.46 Length Width Thickness 60mm 38mm 4mm mm 38mm 4mm mm 38mm 4mm mm 38mm 4mm mm 38mm 4mm mm 38mm 4mm mm 38mm 4mm mm 38mm 4mm mm 38mm 4mm Length Width Thickness 1000mm 35mm 4mm mm 38mm 4mm mm 45mm 4mm Planer blades 3mm thick TCT Length Width Thickness 60mm 30mm 3mm mm 30mm 3mm mm 30mm 3mm mm 30mm 3mm mm 30mm 3mm mm 30mm 3mm mm 30mm 3mm mm 30mm 3mm mm 30mm 3mm Page 19
5 Serrated irons 4mm thick Length Width Thickness 100mm 30mm 4mm mm 30mm 4mm mm 30mm 4mm mm 30mm 4mm mm 30mm 4mm 9.83 Serrated irons 5mm thick Length Width Thickness 130mm 38mm 5mm mm 38mm 5mm mm 38mm 5mm mm 38mm 5mm Serrated irons 8mm thick Length Width Thickness 20mm 35mm 8mm mm 40mm 8mm mm 45mm 8mm 3.84 Length Width Thickness 40mm 50mm 8mm mm 50mm 8mm mm 50mm 8mm mm 50mm 8mm mm 50mm 8mm mm 50mm 8mm mm 50mm 8mm mm 50mm 8mm mm 50mm 8mm Length Width Thickness 40mm 60mm 8mm mm 60mm 8mm mm 60mm 8mm mm 60mm 8mm mm 60mm 8mm mm 60mm 8mm mm 60mm 8mm mm 60mm 8mm mm 60mm 8mm Length Width Thickness 40mm 70mm 8mm mm 70mm 8mm mm 70mm 8mm mm 70mm 8mm mm 70mm 8mm mm 70mm 8mm mm 70mm 8mm mm 70mm 8mm mm 70mm 8mm Page 20
6 Serrated irons bar lengths Length Width Thickness 650mm 30mm 4mm mm 35mm 4mm mm 40mm 4mm mm 38mm 5mm mm 30mm 8mm mm 35mm 8mm mm 40mm 8mm mm 45mm 8mm mm 50mm 8mm mm 60mm 8mm mm 70mm 8mm mm 80mm 8mm TCT turnover knives Size Notes Bevel ends Chip-breaker Chip-breaker Bevel ends Bevel ends Bevel ends Bevel ends Bevel ends Bevel ends Triangular spurs Diamond spurs Castle tips Side scorers Centre points Page 21
7 Tersa knives Size Grade 130mm 10mm 2.3mm HSS mm 10mm 2.3mm HSS mm 10mm 2.3mm HSS mm 10mm 2.3mm HSS mm 10mm 2.3mm HSS Centrofix Size Grade 115mm 12mm 2.7mm HSS mm 12mm 2.7mm HSS Centrolock Size Grade 20mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm HSS mm 16mm 3mm TCT mm 16mm 3mm TCT mm 16mm 3mm TCT Centrostar Size Grade 100mm HSS mm HSS mm HSS Page 22
8 Boring Bits Lip and Spur Drills Size Carbide Tipped 3 X 10 X 57 R/H + L/H Lip + Spur X 10 X 70 R/H + L/H Lip + Spur X 10 X 57 R/H + L/H Lip + Spur X 10 X 70 R/H + L/H Lip + Spur X 10 X 57 R/H + L/H Lip + Spur X 10 X 70 R/H + L/H Lip + Spur X 10 X 70 R/H+L/H Lip + Spur X 10 X 57 R/H + L/H Lip + Spur X 10 X 70 R/H + L/H Lip + Spur X 10 X 57 R/H + L/H Lip + Spur X 10 X 70 R/H + L/H Lip + Spur X 10 X 57 R/H + L/H Lip + Spur X 10 X 70 R/H + L/H Lip + Spur X 10 X 57 R/H+L/H Lip + Spur X 10 X 70 R/H+L/H Lip + Spur X 10 X 57 R/H+L/H Lip + Spur 7.83 Through Drills Size Carbide Tipped 3 X 10 X 57 R/H + L/H Through X 10 X 70 R/H + L/H Through X 10 X 57 R/H + L/H Through X 10 X 70 R/H + L/H Through X 10 X 57 R/H + L/H Through X 10 X 70 R/H + L/H Through X 10 X 70 R/H+L/H Through X 10 X 57 R/H + L/H Through X 10 X 70 R/H + L/H Through X 10 X 57 R/H + L/H Through X 10 X 70 R/H + L/H Through X 10 X 57 R/H + L/H Through X 10 X 70 R/H + L/H Through X 10 X 57 R/H+L/H Through X 10 X 70 R/H+L/H Through 8.06 Laser Drills Size Carbide Tipped 4 X 10 X 57 R/H + L/H Laser 4 X 10 X 70 R/H + L/H Laser 5 X 10 X 57 R/H + L/H Laser X 10 X 70 R/H + L/H Laser X 10 X 70 R/H+L/H Laser 6 X 10 X 57 R/H + L/H Laser X 10 X 70 R/H + L/H Laser X 10 X 57 R/H + L/H Laser 7 X 10 X 70 R/H + L/H Laser 8 X 10 X 57 R/H + L/H Laser X 10 X 70 R/H + L/H Laser X 10 X 57 R/H+L/H Laser X 10 X 70 R/H+L/H Laser X 10 X 57 R/H+L/H Laser Page 23
9 Lip and Spur Drills Size Solid Carbide 3 X 10 X 57 R/H + L/H Lip + Spur X 10 X 70 R/H + L/H Lip + Spur 3 X 8 X 57 R/H + L/H Lip + Spur X 10 X 57 R/H + L/H Lip + Spur 4 X 10 X 70 R/H + L/H Lip + Spur 5 X 10 X 57 R/H + L/H Lip + Spur 5 X 10 X 70 R/H + L/H Lip + Spur 5.5X 10 X 70 R/H+L/H Lip + Spur 6 X 10 X 57 R/H + L/H Lip + Spur 6 X 10 X 70 R/H + L/H Lip + Spur 7 X 10 X 57 R/H + L/H Lip + Spur Through Drills Size Solid Carbide 3 X 10 X 57 R/H + L/H Through X 10 X 70 R/H + L/H Through 3 X 8 X 57 R/H + L/H Through 4 X 10 X 57 R/H + L/H Through X 10 X 70 R/H + L/H Through X 10 X 57 R/H + L/H Through X 10 X 70 R/H + L/H Through X 10 X 70 R/H+L/H Through 6 X 10 X 57 R/H + L/H Through X 10 X 70 R/H + L/H Through X 10 X 57 R/H + L/H Through X 10 X 70 R/H + L/H Through X 10 X 57 R/H + L/H Through X 10 X 70 R/H + L/H Through X 10 X 57 R/H+L/H Through X 10 X 70 R/H+L/H Through Jobber Drills Size Hand 2.0mm Left Each mm Left Each mm Left Each mm Left Each mm Left Each 3.84 Size Hand 2.0mm Right Box of mm Right Box of mm Right Box of mm Right Box of mm Right Box of Drill Adaptors Size Hand Page mm Left and Right mm Left and Right mm Left and Right mm Left and Right mm Left and Right 6.12
10 Tool Room Items Saw tips Bennett Saws // 2015 Application Length Thickness Width Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood and Non-Ferrous Materials Wood Groovers Wood Groovers Wood Groovers Wood Groovers Wood Groovers Wood Groovers Wood Groovers Wood Groovers Wood Groovers Wood Groovers Page 25
11 Application Length Thickness Width Panel Saws Panel Saws Panel Saws Panel Saws Panel Saws Panel Saws Panel Saws Panel Saws Panel Saws Panel Saws Panel Saws Panel Saws Panel Saws Panel Saws Panel Saws Panel Saws Panel Saws Grinding wheels Profile Grinding Ruby Ruby Blue Blue Bandsaw TCT Topping TCT Facing Jointing stones Dowel stone 12.5mm dia x 20 x Weinig stab 165 x 60 x 15 White Weinig 330 x 60 x x 75 x Ultrasonic tanks Ultrasonic Tank L x 300W x 400D 1, Tank lid Heavy duty basket Ultrasonic cleaning fluid 5 litres Page 26
12 Hydro grease gun Wanner high pressure gun EP 2 grease cartridge 2.75 Grease gun spare parts available from stock Page 27
13 Sharpening Services RFU Bandsaws Length Width Swaged bandsaws levelled, re-tensioned and sharpened Upto 20' 0 3" Upto 20' 0 4" Upto 27' 0 6" Upto 31' 0 8" Upto 36' 0 9" Upto 40' 0 10" HPG Stellite tipped Length Width Stellite tipped bandsaws levelled, re-tensioned and sharpened Upto 20' 0 3" Upto 20' 0 4" Upto 27' 0 6" Upto 31' 0 8" Upto 36' 0 9" Upto 40' 0 10" HPG Stellite re-tipped Length Width Pitch Stellite tipped bandsaws levelled, re-tensioned, re-tipped, sideground and sharpened Upto 20' 0 3" 30mm Upto 20' 0 4" Upto 25' 0 5" Upto 27' 0 6" Length Width Pitch Upto 20' 0 3" 1 1/4" - 32mm Upto 20' 0 4" Upto 25' 0 5" Upto 27' 0 6" Length Width Pitch Upto 20' 0 3" 1 1/2" - 38mm Upto 20' 0 4" Upto 25' 0 5" Upto 27' 0 6" Upto 31' 0 8" Upto 36' 0 9" Upto 40' 0 10" Page 28 Length Width Pitch Upto 20' 0 3" 1 3/4" - 45mm Upto 20' 0 4" Upto 25' 0 5" Upto 27' 0 6" Upto 31' 0 8" Upto 36' 0 9" Upto 40' 0 10" Length Width Pitch Upto 25' 0 5" 2" - 50mm Upto 27' 0 6" Upto 31' 0 8" Upto 36' 0 10" Upto 40' 0 10"
14 Miscellaneous bandsaw repairs Extra Ground & Re-Set Plus 50% Extra Tension & Levelling Plus 50% Sideground Cracks Welded 7.12 Joints Welded 7.12 Teeth Rebuilt 7.12 Re-Profiling Resin Removed 7.12 Twist Removed Re-cut & Serviced New price less 25% Narrow bandsaws Sharpening Per Foot 0.83 Joints Welded 5.02 T.C.T sharpening Page 29 No. Of Teeth ATB T/Chip Upto Upto Upto Upto Upto Upto Upto Upto Upto Upto Upto Upto Upto Upto Upto Upto Upto Saws Over 24" Dia (600mm) 0.39 Per Tooth Saws Over 30" Dia (760mm) 0.60 Per Tooth TCT repairs Smithing Upto 24" Per Inch 0.99 Upto 36" Per Inch 1.33 Upto 48" Per Inch 1.65 New Tips Upto 24" Each 2.59 Over 24" Each 3.09 Extra Ground Plus 50%on sharpening Saw Thicker Than 5mm kerf Plus 50%on sharpening Bevel Changed Upto 24" Plus 100%on sharpening Over 24" Plus 200%on sharpening Re-Gulleted Per Inch 0.83 Teeth Re-Built Each 9.76 Side Ground Per Tooth 0.50 Re-Bored TCT EBS 6.73 Others 9.92
15 Diamond Upto 1000mm Over 1000mm New Pin Holes TCT EBS 3.69 Others 5.41 Diamond Upto 1000mm 6.73 Over 1000mm Plate Glazed/Aluminium Removed 4.74 Bush Fitted Up to 40mm mm - 80mm 8.71 Over 81mm Complete Recondition 75% of New Saw Net Price Circular plate saws Gullet, Sharpen And Set Per Inch 1.03 Recut Per Inch 1.48 Smithing Upto 36" Per Inch 1.36 Smithing Upto 48" Per Inch 1.71 High speed steel circular saws Diameter Upto 250 Regrind 8.71 Upto Upto Upto Up to Upto 250 Recut Upto Upto Upto Up to Chip-breaker Plus 50% Friction Saws Reground Per Inch 1.88 Recut Per Inch 3.37 Inserted Tooth Saws Reground Upto 30" Per Inch 1.33 Reground Upto 36" Per Inch 1.54 Fitting New Teeth And Holders Each New Teeth Per 100 POA New Holders Per 100 POA Smithing Upto 36" Per Inch 1.44 Smithing Upto 48" Per Inch 1.76 Splitting Saws Reground H.S.S or TCT tipped 8 Tooth Pos Hook Tooth Pos Hook Tooth 4Neg/4Pos Tooth 6Neg/6Pos Page 30
16 16 Tooth 8Neg/8Pos Tooth 10Neg/10Pos New Tips Upto 4.4mm Kerf Each Over 4.4mm Kerf Each Long Tips Each Complete Retip New List Price Less 20% Machine Knives And Irons Minimum HSS Planer Blades 3.37 Per Inch 0.46 Side Irons 4.63 Per Inch 0.72 Machine Knives 4.63 Per Inch 0.72 Profile Knives 1 curve Per Inch 5.24 Profile Knives 2 curves Per Inch 7.87 Profile Knives 3 curves Per Inch TCT Minimum Planer Blades 6.84 Per Inch 1.13 Side Irons Per Inch 1.92 Machine Knives Per Inch 1.92 Profile Knives 1 curve Per Inch 7.87 Profile Knives 2 curves Per Inch Profile Knives 3 curves Per Inch Handsaws Sharpen And Set 8.00 Recut New Blade Fitted New Handle Man Crosscut Tenon Saws Sharpen And Set 6.18 Recut New Blade Fitted New Handle Chainsaws Reground Link Replaced 8.71 Long Chains Mortices Chains Reground Chains Repaired New Bearings Chisel And Bit Reground Chisels Stone or Wood Per Inch 5.57 Router Cutters Reground 3.97 Page 31
17 Ernest Bennett (Sheffield) Ltd Caxton Way Dinnington Sheffield South Yorkshire S25 3QE Tel Fax Website Page 32
Proform Tooling Ltd Unit 4 Victoria Spring Business Park Wormald Street Liversedge West Yorkshire WF15 6RA Tel: Fax:
1 Proform Tooling Ltd Unit 4 Victoria Spring Business Park Wormald Street Liversedge West Yorkshire WF15 6RA Tel: 01924 502835 Fax: 01924 502836 Established in 1995 Proform Tooling Ltd has enjoyed a period
January Price List
January 2017 List 1 PROFORM TOOLING LTD Unit 4 Victoria Spring Business Park Wormald Street Liversedge West Yorkshire WF15 6RA Tel: 01924 502835 Fax: 01924 502836 www.proformtooling.co.uk Established in
HICKORY SAW & TOOL, INC.
HICKORY SAW & TOOL, INC. 406 9 th Street S.E., Hickory, N.C. 28602 P.O. Box 2407, Hickory, N.C. 28603 Telephone: (828) 324-5585 1-800-762-9899 Fax: (828) 324-5588 1-800-762-6845 www.hickorysawandtool.com
OUR CORE BUSINESS STRENGTHS
OUR CORE BUSINESS STRENGTHS Consistently reliable delivery of a proven service and product quality Union Grove Saw and Knife was founded in 1983 with a strong desire to become a regional tool company known
Carbide Applications and Grades
Carbide Applications and Grades Most tooling suppliers only offer one grade of carbide regardless of the customer s application. There are dozens of woodworking carbide grades on the market. Each manufacturer
Agricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
Saws for cutting wood, aluminum metal and plastics
Saws for cutting wood, aluminum metal and plastics ISHAD saw blades are manufactured with the best raw materials available today. THE STEEL BODY: The high quality steel plate is manufactured with special
PLANING, FINGER JOINTING
6 POWERLOCK, PLANING, FINGER JOINTING PowerLock 188 Planing cutterheads 199 Planing mill cutters 212 Finger jointing cutters 216 Hydro-programme 219 6 Tool system PowerLock for planing- and moulding machines
CUTTER BLOCKS. Knives HSS & Carbide Tipped
C CUTTER BLOCKS Knives HSS & Carbide Tipped 185 UNIVERSAL TOOLHEAD High tensile steel body toolhead with 2 teeth Supplied with 12, 24 or 36 sets of solid HSS knives Custom profiled knives available on
BENCH MORTICER. Woodworking Equipment Bench Morticer with Sliding Table. trade level
BENCH MORTICER 01944 Bench Morticer with Sliding Table A compact bench mounted morticer giving high levels of accuracy, ease of use with industrial features at an affordable price. An important feature
Blower Cutter Jig Saw Circular Saw Circular Saw Drill High Speed Drill High Speed Drill Mixer Hammer Drill Hammer Drill Demolition Hammer
Index M00 M00 M0801K M0901 M0920 M0921 M1902 M2300 M2401Z M3600 M3601 M3700 Cutter Drill Power Planer Compound Miter Saw Portable Cut-off Router Router (Plunge type) Trimmer 08 08 M4000 M4101 M4301 M5801
Hand Tools. 1. Marking Out Tools
Hand Tools 1. Marking Out Tools Steel Rule Used for measuring Measure twice, cut once, golden rule of woodwork Rule should begin from the edge of the metal Millimetres are used, nothing else will do 10mm
INDUSTRIAL QUALITY SINCE CALL , or VISIT for more information.
ALL- CIRCULAR SAW BLADE LINE-UP for more information. WOODWORKER SERIES BLADES FOR THE PROFESSIONAL WOODWORKER Century s Woodworker Series blades are manufactured to the highest standards of precision
Optimus. The New Generation of Saw Blades. 4X Cutting Power Catalog US
Optimus The New Generation of 4X Cutting Power Catalog US OUR COMPANY ISHAD manufactures high quality saw blades for exportation world-wide. Each product complies with the strictest quality control standards
Elite model AFILAmaq MD CNC
Elite model AFILAmaq MD CNC Automatic carbide tipped circular saw sharpening machine with two CNC axes Elite model AFILAmaq MD CNC Automatic and economical carbide tipped circular saw blade top and face
order online at
F-2 LENGTHS OF FINGER JOINTS REVERSIBLE By far the most common joint. Requires two heads; one with thick cutter at top of stack and one with thick cutter at bottom of stack. This joint may also be achieved
GRINDING MOULDER AND PLANER KNIVES
BULLETIN 800H GRINDING MOULDER AND PLANER KNIVES Wisconsin Knife Works HSS, AKM, D-2, AND OPTI KNIVES When grinding moulder and planer knives, factors such as grinding wheel types and grit are often a
I N D U S T R I A L Q U A L I T Y
I N D U S T R I A L Q U A L I T Y W o o d w o r k i n g C u t t i n g To o l s C O N T E N T TECHNICAL INFORMATION CUTTERS & Carbide, Stellite or HSS Tipped CUTTER BLOCKS Knives HSS & Carbide Tipped CUTTER
Chapter 25. Other Machining Processes. Materials Processing. MET Manufacturing Processes. Shaping Planing Broaching Sawing Filing
MET 33800 Manufacturing Processes Chapter 25 Other Machining Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Other Machining Processes Shaping
GET 20% OFF CIRCULAR SAW BLADE DISPLAYS + Adder
Revised 3-16-18 PROMOTIONAL BOOKLET NOW AVAILABLE, READY TO SHIP Expanded Blade Product Line ALL Woodworker Series, Construction Series, Fiber Cement and Metal Series blades available. ALL Vinyl Siding
Lecture 18. Chapter 24 Milling, Sawing, and Filing; Gear Manufacturing (cont.) Planing
Lecture 18 Chapter 24 Milling, Sawing, and Filing; Gear Manufacturing (cont.) Planing For production of: Flat surfaces Grooves Notches Performed on long (on average 10 m) workpieces Workpiece moves / Tool
TRAINING MANUAL. Part INTRODUCTION TO TWIST DRILLS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 2 INTRODUCTION TO TWIST DRILLS - 1 - DEFINITION:- A rotary end cutting tool having two or more cutting lips, and having two or more spiral (helical) or
Surface planer or buzzer. Performs the tasks of dressing, squaring and straightening timber Machining short lengths of timber. Without the bridge guard. Without the appropriate training. Without PPE. Set
TABLES SAWS Laguna Fusion 10 tablesaw Laguna Platinum 10" Tablesaw Laguna Platinum Dovetail 10 Tablesaw BANDSAWS Laguna 14 Bandsaw 14 Twelve Laguna LT14 SUV Bandsaw Laguna 18 Bandsaw LT 18 3000 PLANERS
Technical Training USG Saw Chain Grinder
Technical Training USG Saw Chain Grinder 1 USG HOS The STIHL USG Universal Sharpener will sharpen all types of saw chain. This is by far the most versatile and accurate machine of its type on the market.
grinding technologies
grinding technologies SPECIAL OFFERS February 2013 MX150 1500 KNIFE GRINDER MX150 1500 Knife grinder Magnetic chuck 1500*120mm; PLC controlling automatic down-feed, automatic working cycle, spark-out and
Battery pack, 4,8 V
FOR DEVICES NO LONGER INCLUDED IN THE CATALOGUE (DELIVERY ONLY AS LONG AS STOCKS LAST) HAND-HELD ELECTRICAL TOOLS IMPACT DRILLS For Sb E 1000/2 S- R+L Signal Diamond core bit, M 22, hard, 66 diameter 6.24500
Band Machining. Chapter 20
Chapter 20 Band Machining LEARNING OBJECTIVES After studying this chapter, students will be able to: Describe how a band machine operates. Explain the advantages of band machining. Select the proper blade
All about Tools. Original WEINIG Tools Your Guaranty for Super Workpieces
All about Tools Original WEINIG Tools Your Guaranty for Super Workpieces The cutterhead defines the workpiece quality. The best machine only works as well as the tool it is equipped with. A high quality
FITTING INTRODUCTION:
FITTING INTRODUCTION: Machine tools are capable of producing work at a faster rate, but there are occasions when components are processed at the bench. Sometimes it becomes necessary to replace or repair
Saws & Cutters. Spear & Jackson Resharpenable 300mm (12 ) x 15pt Brass Backed. Spear & Jackson Resharpenable 250mm (10 ) x 15pt Brass Backed
Section Tenon Saws Part No Spear & Jackson Resharpenable 00mm (12 ) x 15pt Brass Backed H105682 $67.10 $59.90 10 Spear & Jackson Resharpenable 250mm (10 ) x 15pt Brass Backed H105681 $58.70 $52.40 10 Spear
April 2018 Edition STANDARD DUTY
April 2018 Edition STANDARD DUTY INDUSTRIAL POWER TOOLS Index Angle Grinder 4 Belt Sander 4 Blower 6 Circular Saw 5 Compound Mitre Saw 5 Demolition Hammer 3 Drill 3 Jig Saw 5 Finishing Sander 4 Rotary
PUNK / 1 POWER TOOL ACCESSORIES 2015/16 - LIST PRICES
PUNK / 1 POWER TOOL ACCESSORIES 2015/16 - LIST PRICES PUNK- HIGH PERFORMANCE POWER TOOL ACCESSORIES. DESIGNED FOR THE SERIOUS PROFESSIONAL. Demand more from your power tool accessories. QUALITY Super durable
192 GENERAL WOODWORK (CMW 11, 12 & 13) Examination Scheme
192 GENERAL WOODWORK (CMW 11, 12 & 13) Examination Scheme This is a trade related course The examination will comprise two papers. 192-1 Paper I: Section A. This paper comprises two sections: (A and B)
HOLYTEK. ,MJt1NTAINING YO ~TOOLS AND PRODJ,JCT QUALITY JUST G EASIER
,MJt1NTAINING YO ~TOOLS AND PRODJ,JCT QUALITY JUST G EASIER.?;.~::;,I~:~ 1~:~:: ~~ ~'::; - sfp~l'forinaft~~jim :... ~)'~;l.lse~:ln'w60d~orkingandother. applications. This series of equiprnent makes grinding
Guild of Oregon Woodworkers Shop Safety Test
Guild of Oregon Woodworkers Shop Safety Test You must pass the Test with an 80% or better and self-correct it to 100% Make sure you put the answers under the correct portion of the answer sheet for the
MAXWELL TOOLS CO. Mfrs of Milling Cutters; Gear Cutters; Gear Hobs; Gear Shapers; Broaches
ISO 9001 : 2008 Certified MAXWELL TOOLS CO. Mfrs of Milling Cutters; Gear Cutters; Gear Hobs; Gear Shapers; Broaches # 3, Industrial Estate, RAJPURA - 140 401 Tel. +91 1762-224427, Fax : +91-1762-223372
Bandsaw Blade Selection Guide
Bandsaw Blade Selection Guide 1. Determine Blade Length Refer to your manual for a specified length. or Stretch out an existing blade and measure it. or Set the wheels to the centre of the adjusting bolt
Project 13586EZ: Writing Desk. Writing Desk Materials List
Project 13586EZ: Writing Desk This writing desk will make a handsome addition to just about any room in the house. The one shown is made of cherry, a logical choice for a piece like this, but mahogany
New Lineup H.O.: Makita Power Tools India Pvt. Ltd. Makita Service Centre: Chennai: Cochin: Delhi: Kolkata: Pune:
New Lineup 2018 CATALOGUE 2 Index 4- Belt Sander Blower Circular Saw Cutter 4 Demolition Hammer Die Grinder Drill/Hammer Drill 2- Finishing Sander Jig Saw Mixer Portable Cut-off 4 Power Planer Random Orbit
ROUTER BITS. Tooling Group Straight Bits. Insert Roundover Bits 2-7. Spiral Solid Carbide Bits. Insert Rabbeting Bits 2-8
ROUTER BITS Tooling Group 2 Straight Bits 2-2 Insert Roundover Bits 2-7 Spiral Solid Carbide Bits 2-3 Insert Rabbeting Bits 2-8 Insert Straigh Bits 1 flute 2-4 Dovetail Bits 2-9 Insert Plunging Straight
Project 17884EZ: Shaker End Table
Project 17884EZ: Shaker End Table With its clean, simple lines, this piece is unmistakably Shaker style. Ours is made from cherry, a wood commonly used by Shaker craftsman, but we ve also seen this piece
MASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
HAND TOOLS. PILANA TOOLS s.r.o.
HAND TOOLS PILANA TOOLS s.r.o. HISTORY & PRESENT TIME HISTORY The tool production in Hulin began in 1934. The firm was founded by Mr. Studeník who named the new company First Moravian factory for saws
Using hand tools Prepared by. Paul Roberts Neville Comins
Using hand tools Prepared by Paul Roberts Neville Comins Why use hand tools? What hand-tools? Where to buy hand tools? Sharpening Power tools & machinery Conclusion Hand tools have many benefits such as:
GENERAL MACHINING PRACTICE FOR CMI ELECTROMAGNETIC IRON
GENERAL MACHINING PRACTICE FOR CMI ELECTROMAGNETIC IRON Electromagnetic Iron can be readily machined when proper tool angles are used. Tools should be ground to more acute cutting edge angles than are
Trestle Table and Benches Materials List
Project 18444EZ: Trestle Table and Benches In the early days of our country, trestle tables were popular because they could easily be disassembled and moved out of the way when not in use no small advantage
MACHINE TOOLS; METAL-WORKING NOT OTHERWISE PROVIDED FOR
XXXX B23 MACHINE TOOLS; METAL-WORKING NOT OTHERWISE PROVIDED FOR XXXX PLANING; SLOTTING; SHEARING; BROACHING; SAWING; FILING; SCRAPING; LIKE OPERATIONS FOR WORKING METAL BY REMOVING MATERIAL, NOT OTHERWISE
FULLER CHISELS CUTTING TOOLS
CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed
CMT introduces the best thing to happen to tooling since orange router bits.
MAKING THE BLADES CMT introduces the best thing to happen to tooling since orange router bits. Orange saw blades. Not just any colored blade, but CMT high quality circular saw blades with trademark orange
Spindle Tooling. Wobble Saw. RT Adjustable Grooving Rabbeting Cutterhead. 150 Spindle Tooling WOBBLE SAW AG00701
Spindle Tooling Wobble Saw WOBBLE SAW RT Adjustable Grooving Rabbeting Cutterhead AG00701 Titman s Wobble Saw is the traditional answer to the problem of cutting various widths of grooves in timber, chipboard
Holemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
TABLE OF CONTENTS INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
TABLE OF CONTENTS PAGE PRO-LINE Dowel Drills...................................................................... 2-3 Brad Point Dowel Drills......................................................................
Saw Blades Longer lasting Vibration free running High level of finish Noise pollution compliance
Longer lasting Vibration free running High level of finish Noise pollution compliance Tuning and balancing Correct tuning is fundamental to obtain top performance from a saw blade. It gives the blade stability
Contents. Introduction Sources of Technical information Acknowledgements 1. Timber technology Care and use of hand tools 81
Contents Introduction Sources of Technical information Acknowledgements vii ix x. Timber technology How a tree grows The structure of wood Conversion and seasoning of wood Protection of timber and joinery
Drill Bits & Hole Saws
F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill
no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
College of Forestry 610: Power Tools
College of Forestry 610: Power Tools Safety Policy & Procedure Manual Section 600: Workshops and Shop Tools Effective: 01 January 2007 Revised: August 2014 PURPOSE The purpose of this section is to provide
STEEL RULE. Stock TRY SQUARE
FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation
Cabinetmaking & Millwork CIP Task Grid
1 Secondary Task List 100 DEMONSTRATE PERSONAL SAFETY. 101 Demonstrate knowledge of general safety rules for working in the cabinetmaking lab. 102 Identify cabinetmaking lab tools and equipment. 103 State
Holemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
Professional Power Tools & Accessories
Professional Power Tools & Accessories NEW Engine and outputs sold separately. 6.5HP 3L 20cm Ø 3150min -1 2.4KW (50Hz) 10.5A (230V) 21A (110V) 230V (16A) BS4343 AC 175 Bar 6m 8L / in 1L Powered by 75mm
Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes
MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing
Care of the bar and chain
User Guide Care of the bar and chain Lubricate with proper lubricant Lubrication is extremely important, and that the correct lubricating oil, and that oil actually arrive where it is needed. Chain oil
SERRATING / GROOVING TOOL - ST SERIES. Features : 1/8 x3/8 x1/8
3 1 8 2-2 SERRATING / GROOVING TOOL - ST SERIES FOR GROOVING IN TUBE SHEETS Tool 1/8 x 3/8 x 1/8 Spacing Spare Tool Bits 1/8 x 1/4 x 1/8 Spacing Special Spacing 9.53 3/8 ST-375-970 ST-3703 ST-3703-S ST-3703-SPEC
The Durham Woodworking Club. January 31, 2016
The Durham Woodworking Club January 31, 2016 A router is a tool used to rout out (hollow out) an area in the face of a relatively hard workpiece, typically of wood or plastic. The main application of routers
Machining Processes Used to Produce Various Shapes. Dr. Mohammad Abuhaiba
Machining Processes Used to Produce Various Shapes 1 Homework Assignment Due Wensday 28/4/2010 1. Show that the distance lc in slab milling is approximately equal to for situations where D>>d. (see Figure
Tel / (USA & CANADA) /
MACHINE SHOP DISCOUNT SUPPLY Tel 0.8.87 / 800.88.09 (USA & CANADA) / Email sales@msdiscounttool.com SUPER PRECISION WEDGE TYPE TOOL POST AND TOOL HOLDER SETS Wedge Type Tool Posts are precision engineered
POWER TOOL ACCESSORY GUIDE
POWER TOOL ACCESSORY GUIDE TABLE OF CONTENTS METAL SAWZALL BLADES 3 WOOD SAWZALL BLADES & HACKZALL BLADES & BLADE KITS 4 SPECIALTY SAWZALL BLADES 5 HOLE SAWS & HOLE SAW KITS 6 SPECIALTY HOLE SAWS 7 THIN
TRAV-L-CUTTER Pipe Cutter
TRAV-L-CUTTER Pipe Cutter Horizontal and vertical c utting Fast and accurate cutting and beveling Add mounting chain sections to fit larger diameters COLD CUTTING, COMPACT DESIGN, EASY SET-UP The Wachs
Cutting Drilling & Tapping
Cutting Drilling & Tapping Section Dowel Drills - Brad Point.0mm ( W Point) C113 $..0mm ( W Point) C1137 $7.0 $.70.0mm ( W Point) C1138 $9.30 $8.0 8.0mm ( W Point) C1 $9.0 $8.0.0mm ( W Point) C1127 $9.0
Cold Saw Blade Basics
Cold Saw Blade Basics 01/2018 Scotchman Industries Inc. 180 US-14 Philip, SD 57567 USA Phone 800.843.8844 - Fax 800.843.2499 www.scotchman.com info@scotchman.com THE COLD SAW BLADE MATERIAL Most Cold Saw
CHIP AND DUST EXTRACTION SYSTEMS
CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories
Woodwor king tools 15 tudio 6. oduction: s change / design, pr o w w w. p i l a n a. c o m echnical specifications are subject t 2005 / T
HISTORY AND PRESENT TIME HISTORY The tool production in Hulin began in 1934. The firm was founded by Mr. Studeník who named the new company First Moravian factory for saws and tools. At first the company
Technology with Time...
PLC Controlled Bandsaw Machine with LMG-LX Rails & Bearings Fully Automatic PLC Controlled Horizontal Double Column LMGA Type Bandsaw Machine.? Steel Center.? General Workshop.? Tool Room.? Forging Industries.?
Severance Offers Four Types of Hand Files To Solve Virtually Every Application
are Great for Many Application Filing Deburring Shaping Forming Chamfering Sharpening Smoothing Beveling De-Flashing Trimming and De-Scaling Severance Offers Four Types of To Solve Virtually Every Application
Bits for hand power tools
Bits for hand power tools Products Page Adaptors 232-233 nterchangeable boring bits 233 Boring bits 234~237 Mortise chisel & bit set 237 Plug cutters & ets 238-239 Forstner bits 240-241 Brad point bits
TRAINING MANUAL. Part 3 REAMERS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 3 REAMERS 1 Purpose of Reamers REAMERS A reamer produces an accurate and highly finished round hole to a much finer tolerance than that produced by a drill.
TITANIUM CARBIDE TIPPED BLADES
12" ALUMINUM / NON-FERROUS METAL COPPER, BRASS NEW LOOK 120 FOR USE ON: TEETH DIENTES DENTS TABLE SAW Sierra Estacionaria Scie Papeterie MITER SAW Tronzadora Scie à Onglets 10" GENERAL PURPOSE / 40 FOR
STAR TOOL SUPPLY / GRAND TOOL SUPPLY
Tel: 20-5-8 / Fax: 20-59-7 50 Huyler St / So. Hackensack, NJ 070 USA JIG AND RECIPROCATING Starrett offers industrial quality high speed steel edge bi-metal saw blades. These blades have a high speed steel
HSS Circular Saw Blades. mechelec
HSS Circular Saw Blades mechelec About us MECHELEC manufactures the largest range of HSS Saws and Knives designed for long-period cutting for diverse applications in various industries. From the very beginning,
All prices are exclusive of VAT. Machinery
Machinery TSM100 SPINDLE MOULDER The TSM100 spindle moulder is a sturdily built machine complete with a flush mounted sliding table suitable for the modern joinery shop. n Cast, precision ground, steel
The WoodWorker s Edge
The WoodWorker s Edge Draw-leaf Game Table 1. 2. Layout the area for the tenons. The tenons are 3/8 thick x 4-1/2 long x 1-1/4 deep and offset to the inside. Create the tenons using the step method to
ASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?
ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and
ABRASIVE CATALOGS. Application: Weld dressing Cutting off smoothing of Casting Can be applied on various kind of Steel and non-ferrous materials
ABRASIVE CATALOGS Reinforced Depressed Centre Grinding Discs are excellently fabricated depressed centre grinding discs that are exclusively available in varying diameters of 4-9 in different thickness.
1.2 Cutting along grain
1. Sawing 1.2 Cutting along grain Application Workpiece material Machine Tooth shape For splitting or edging timber, for cutting lamellos on horizontal and vertical spindles. Soft and hardwood, wet, frozen,
CHX 840 and CHX 1300 CIRCULAR SAW. Versatile sharpening machine for TCT circular saw blades up to 840 or 1300 mm in diameter
CHX 840 and CHX 1300 CIRCULAR SAW Versatile sharpening machine for TCT circular saw blades up to 840 or 1300 mm in diameter CIRCULAR SAW TOOTH FACE AND TOOTH TOP FOR WHEN YOU REQUIRE THAT LITTLE BIT MORE.
HAND TOOLS. PILANA TOOLS s.r.o.
HAND TOOLS PILANA TOOLS s.r.o. Made in Czech Republic Garden saws 5254 Bow frame saw» universal bow frame saw for cutting dry and green wood» exchangeable blade 5244.1 for fresh/green wood or 5244.2 for
Other Machining Operations
Other Machining Operations Chapter 25 25.1 Introduction This chapter covers: Shaping Planing Broaching Sawing Filing 25.2 Introduction to Shaping and Planing Shaping and Planing among the oldest techniques
METRIC / IMPERIAL MINI-MAG LEVEL
Digital Mini-Mag Level 570 Series Measuring range 360 (4 x 90 ) Embedded magnets on three sides Resolution 0.05 Accuracy +/- 0.2 Standard 9V battery Dimensions: L60mm x H60mm x W35mm METRIC / IMPERIAL
March weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
[DOC] WHAT KIND OF DRILL BIT FOR METAL
![[DOC] WHAT KIND OF DRILL BIT FOR METAL](/thumbs/82/85351435.jpg "[DOC] WHAT KIND OF DRILL BIT FOR METAL")
14 January, 2018 [DOC] WHAT KIND OF DRILL BIT FOR METAL Document Filetype: PDF 283.94 KB 0 [DOC] WHAT KIND OF DRILL BIT FOR METAL I'm not sure what type of bolt it is since I. With metal studs gaining
STAR TOOL SUPPLY / GRAND TOOL SUPPLY
SUPER PRECISION WEDGE TYPE TOOL POST AND TOOL HOLDER SETS Wedge Type Tool Posts are precision engineered to assure repetitive accuracy. Advanced design provides built in quick tool changing versatility
MANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY UNIT V Machine Tools Milling cutters Classification of milling cutters according to their design HSS cutters: Many cutters like end mills, slitting cutters, slab cutters, angular
23 WOODWORKING EQUIPMENT
23 WOODWORKING EQUIPMENT Chisel Mortiser Chisel mortiser... 1199 Cutting Machine Heavy duty band saw... 1197 Scroll saw... 1197 Dust Collector Dust collector... 1201 Overarm Router Overarm router... 1202
B/54. Ergonomically designed handle. Motor with highperformance. Continuously adjustable mitres up to 45 (with 5 locking positions)
Ergonomically designed handle Motor with highperformance gear box Continuously adjustable mitres up to 45 (with 5 locking positions) Solid base plate Automatically retracting blade guard /54 ALFRA RotaSpeed
TOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER
TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The
Spokane Hardware Supply, Inc.
Decorative Hardware Hinges Router Bits Cabinet Organizers Furniture Components STRAIGHT BITS, CARBIDE TIPPED - SINGLE, PLUNGE CUT Optimum chip clearance. Specially designed tip for fast plunge cutting.
SHAPING AND PLANING Shaping and planing
SHAPING AND PLANING Shaping and planing the simplest of all machine operations Straight line cutting motion with single-point cutting tool creates smooth flat surfaces. Mainly plain surfaces are machined
CARPENTRY. Carpentry tools: The following are the tools that are made use of in all the wood working operations.
CARPENTRY INTRODUCTION: Carpentry may be defined as the process of making wooden components. It starts from a marketable form of wood and ends with a finished product. It Deals with the building work,