Drilling & Boring Tools

TABLE OF CONTENTS INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND

TABLE OF CONTENTS PAGE PRO-LINE Dowel Drills...................................................................... 2-3 Brad Point Dowel Drills......................................................................

ROUTER BITS. Tooling Group Straight Bits. Insert Roundover Bits 2-7. Spiral Solid Carbide Bits. Insert Rabbeting Bits 2-8

ROUTER BITS Tooling Group 2 Straight Bits 2-2 Insert Roundover Bits 2-7 Spiral Solid Carbide Bits 2-3 Insert Rabbeting Bits 2-8 Insert Straigh Bits 1 flute 2-4 Dovetail Bits 2-9 Insert Plunging Straight

Dowel drills. Adaptors 250. Drill holders 251. X-Treme dowel drills 254. Solid carbide twist drills 259. Dowel drills 260

owel drills Adaptors 250 rill holders 251 X-Treme dowel drills 254 Solid carbide twist drills 259 owel drills 260 Countersinks for dowel drills 266 owel drills for through holes 269 Hinge boring bits 270

Dowel Drills and Boring Bits

owel rills and Products Page XTreme owel rills 145 ~ 147 2 Flute owel rills 148 ~ 149 4 Flute owel rills 150 ~ 152 olid Carbide Twist rills and Adaptors 153 4 Flute owel rills for Through Holes 154 2 Flute

Adaptors & Extensions

Quickbits 44 Adaptors & Extensions 44 Offline Driver 45 Drill Adaptor 45 Mini Chuck 46 Fixed Shank Drills 47 Changeable Drills 48 Drill Countersinks 49 TCT Drill Countersinks 50 TCT Counterbore 51 Plug

HICKORY SAW & TOOL, INC.

HICKORY SAW & TOOL, INC. 406 9 th Street S.E., Hickory, N.C. 28602 P.O. Box 2407, Hickory, N.C. 28603 Telephone: (828) 324-5585 1-800-762-9899 Fax: (828) 324-5588 1-800-762-6845 www.hickorysawandtool.com

Amana Tool Boring/Drilling Bits

Section P-2: Amana Tool Bits Amana Tool Bits Section P-2: Amana Tool Bits Last Updated: 07/01/10 Section P-2: Amana Tool Bits Maverick Hardware Brad Point Boring 70mm Long, X 30mm Shank, Right Hand, Black

Bits for hand power tools

Bits for hand power tools Products Page Adaptors 232-233 nterchangeable boring bits 233 Boring bits 234~237 Mortise chisel & bit set 237 Plug cutters & ets 238-239 Forstner bits 240-241 Brad point bits

Classical cutters The finest range of classical shaped bearing guide cutters

Classical cutters The finest range of classical shaped bearing guide cutters TCT Roman Ogee with 12.7mm and 16mm Bearing ROB4 TCT Classic Cove CC5 Produces a perfect scotia mould on door stiles and rails.

Snappy. Make it. No more hassling with a chuck key! Just push your bit into the Quick Chuck and it s locked in place. Change bits instantly!

Proudly Made in the USA ADAPTS ALL 1/4 HEX POWER BIT TOOLS TO YOUR POWER DRILL No more hassling with a chuck key! Just push your bit into the Quick Chuck and it s locked in place. Change bits instantly!

precisely ground shoulder cutting edges make cylindrical, tear-free holes.

TC wood twist drill bit TURBOWOO 112 Wood twist drill bit 114 HSS wood twist drill bit 116 Wood twist drill bit KEILBIT 117 Auger bit lewis shape 118 Machine forstner drill bit 119 Flat bit KEILBIT 120

WOOD DRILL BITS WOOD WORKING WITH PROFESSIONAL TOOLS HAMMER DRILL BITS CHISEL METAL DRILL BITS WOOD DRILL BITS SAWS ASSORTMENTS MODULES - SHELVES

WOO RILL WOO WORKING WITH PROFESSIONAL TOOLS WOO RILL METAL RILL RILL 184 Wood twist drill bit TURBOWOO 119 120 180 280 Wood twist drill bit 121 122 186 HSS wood twist drill bit 123 187 Wood twist drill

Quickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS

Quickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS Quickbits Quickbits Index 66 Quickbits Adaptors & Extensions 68 Quickbits Adaptors Socket 66 Quickbits Chuck Mini

Quickbits -Adaptors -Drills -Countersinks -Drill Countersinks

QUICKBITS Quickbits -Adaptors -Drills -Countersinks -Drill Countersinks Quickbits Quickbits Index 74 Quickbits Adaptors & Extensions 76 Quickbits Adaptors Socket 74 Quickbits Chuck Mini 84 Quickbits Countersinks

Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP

Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292

January Price List

January 2017 List 1 PROFORM TOOLING LTD Unit 4 Victoria Spring Business Park Wormald Street Liversedge West Yorkshire WF15 6RA Tel: 01924 502835 Fax: 01924 502836 www.proformtooling.co.uk Established in

2016/2017 THE WIDEST TOOLING RANGE. Catalogue. Overall Rating 10! Top Performing Router Bits. English edition. Jig Saw Blades. Tools for Multi-Cutters

abre Router its & ets Cutters & Chucks owel rills aws Accessories Catalogue English edition 2016/2017 THE WET TOONG RANGE Overall Rating 10! Top Performing Router its 1994 Welcome to the 2016/2017 catalogue

WOODWORKING PCD CUTTING TOOLS

WOODWORKING PCD CUTTING TOOLS Page A 2-3 4-5 6 7 8 9 11 13 14 15 17 Contents Telcon s Profile Straight Routers Z= Routers Z=2+2 Routers Z=3 Straight Edge Router Hinge Boring Bit Throuth Hole Drill T-Slot

MASONRY DRILL and CHISEL

MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content

Various other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple

Drilling The process of making holes is known as drilling and generally drilling machines are used to produce the holes. Drilling is an extensively used process by which blind or though holes are originated

Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes

MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing

Drills INDEX. Drills. Drills GROUP

rills INEX rills rills Offering a comprehensive range of industrial and professional grade drills and boring bits for the woodworking industry. rilling products include: Solid Carbide rills, Machine rill

Premium Power Tool Accessories Proudly Made in the USA

Premium Power Tool Accessories Proudly Made Table of Contents Make it Snappy Tools Premium Power Tool Accessories Proudly Made About Us Founded in a basement machine shop in Minnesota in 1962, we are a

Tube Specialty Tools

Tube Specialty Tools Just as there are different reasons for finishing the cut ends of pipe or tubing, there are different tools and methods for doing the job. 1. Often, the only reason for finishing the

Drilling. Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL.

Drilling Machine Drilling Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL. The machine used for drilling is called drilling machine. The drilling

Cutting Drilling & Tapping

Cutting Drilling & Tapping Section Dowel Drills - Brad Point.0mm ( W Point) C113 $..0mm ( W Point) C1137 $7.0 $.70.0mm ( W Point) C1138 $9.30 $8.0 8.0mm ( W Point) C1 $9.0 $8.0.0mm ( W Point) C1127 $9.0

Metal Drilling.

101 ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of solution for every professional application. Each metal drill bit is made of high speed steel with high precision-cut

Flame. Tree Pointed. Product Barcode Price Ø Length Shank Code

Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate

Spindle Tooling. Wobble Saw. RT Adjustable Grooving Rabbeting Cutterhead. 150 Spindle Tooling WOBBLE SAW AG00701

Spindle Tooling Wobble Saw WOBBLE SAW RT Adjustable Grooving Rabbeting Cutterhead AG00701 Titman s Wobble Saw is the traditional answer to the problem of cutting various widths of grooves in timber, chipboard

TRAINING MANUAL. Part INTRODUCTION TO TWIST DRILLS

PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 2 INTRODUCTION TO TWIST DRILLS - 1 - DEFINITION:- A rotary end cutting tool having two or more cutting lips, and having two or more spiral (helical) or

Proform Tooling Ltd Unit 4 Victoria Spring Business Park Wormald Street Liversedge West Yorkshire WF15 6RA Tel: Fax:

1 Proform Tooling Ltd Unit 4 Victoria Spring Business Park Wormald Street Liversedge West Yorkshire WF15 6RA Tel: 01924 502835 Fax: 01924 502836 Established in 1995 Proform Tooling Ltd has enjoyed a period

LANDMARK UNIVERSITY, OMU-ARAN

LANDMARK UNIVERSITY, OMU-ARAN LECTURE NOTE: DRILLING. COLLEGE: COLLEGE OF SCIENCE AND ENGINEERING DEPARTMENT: MECHANICAL ENGINEERING PROGRAMME: MECHANICAL ENGINEERING ENGR. ALIYU, S.J Course code: MCE

Ernest Bennett Saws Price List

Ernest Bennett Saws Price List 2015 Contents Circular Saws Rip saws 3 Anti-kick rip saws 3 Spring set plate saws 4 General cross cut saws 4 Negative hook cross cut saws 5 Construction saws 5 Universal

11/15/2009. There are three factors that make up the cutting conditions: cutting speed depth of cut feed rate

s Geometry & Milling Processes There are three factors that make up the cutting conditions: cutting speed depth of cut feed rate All three of these will be discussed in later lessons What is a cutting

ICS CUTTING TOOLS, INC 511 Main Street Casco, WI USA (920) Fax (920)

ICS CUTTING TOOLS, INC 511 Main Street Casco, WI 54205-0125 USA (920) 837-2526 Fax (920) 837-2530 www.icscuttingtools.com info@icscuttingtools.com Auger Bits Dual Auger (Stud)... 20 Electricians Power...

Catalogue. Shank-mounted tools for machining. wood, UPVC and aluminium. REESE + FISCHER GmbH + Co. KG

REEE + FICHER GmbH + Co. KG hank-mounted tools for machining wood, UPVC and aluminium Catalogue info@napoleon-werkzeuge.de www.napoleon-werkzeuge.de HF ABOUT U Everything started in 11...first as a contract

Trade of Toolmaking Module 1: Induction & Bench Fitting Unit 3: Drilling, Counterboring & Countersinking Phase 2

Trade of Toolmaking Module 1: Induction & Bench Fitting Unit 3: Drilling, Counterboring & Countersinking Phase 2 Published by SOLAS 2014 Unit 3 1 Table of Contents Document Release History... 3 Unit Objective...

ROOP LAL Unit-6 Drilling & Boring Mechanical Engineering Department

Lecture 4 Notes : Drilling Basic Mechanical Engineering ( Part B ) 1 Introduction: The process of drilling means making a hole in a solid metal piece by using a rotating tool called drill. In the olden

Mag_Catalog Final 11/3/10 11:16 AM Page 1

Mag_Catalog 2010-3Final 11/3/10 11:16 AM Page 1 Mag_Catalog 2010-3Final 11/3/10 11:16 AM Page 3 C O N T E N T S DRILLBITS AUGER BITS: Nailbomber Moly Coated / Ship Head Heavy Duty (357DLX, 303DLX)....................4

Assembly. Insert stem and then fix/lock using the grub screw as in picture.

Assembly Parts list: (Boxed set) Body inc hinge plate x1 M33 x 3.5 16 tpi + depth stop collar x1 1 stem + collar x1 HSS cutter x1 Bristol handle x1 Twist handle x1 4mm Allen key x1 3mm Allen key x 1 Instruction

Metal Drilling. Engineered for Controlled Precision and Speed METAL DRILLING. Tip Geometry. Drill Bit Selection. 135 Split Point

Engineered for Controlled Precision and Speed Shank Diameter Shank Point Angle Drill Bit Diameter : Point Angle: Drill Diameter: Shank : : Tip Geometry 118 Conventional Point 118 Point Angle 135 Split

Trade of Toolmaking Module 2: Turning Unit 3: Drilling, Reaming & Tapping Phase 2

Trade of Toolmaking Module 2: Turning Unit 3: Drilling, Reaming & Tapping Phase 2 Published by SOLAS 2014 Unit 3 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction... 4

Metal Drilling

www.irwin.com Metal Drilling Engineered for Controlled Precision and Speed Shank Diameter Shank Point Angle Drill Bit Diameter : The length from the point to the end of the drill bit Point Angle: The angle

Reamer Basics. Fixed Reamers The reamer size is fixed and any size reduction due to wear or sharpening cannot be reclaimed

1 Reamer Basics Reamers are available in a variety of types, materials, flute styles and sizes The typical reamer is a rotary cutting tools designed to machine a previously formed hole to an exact diameter

ADVANCE TYPES OF DRILL BIT - A REVIEW

ADVANCE TYPES OF DRILL BIT - A REVIEW Chandresh P. Rana 1,Pankaj D Pandey2,Akshar Y Parmar 3,Pradipsinh A Parmar 4 1 Asst. Professor, Mechanical Engineering Department, Vadodara Institute of Engineering,

ROYAL ULTRA-PRECISION ER COLLETS " TIR

ROYAL C EXPANDING COLLETS q Unlike chucks and most collets that grip the OD of a workpiece, C expanding collets are designed to grip on the ID of a part. q Accu-length design ensures precise workpiece

Hinge Mortising Jig. One of the make it or break it parts of building a. 6 ShopNotes No. 74

Hinge Mortising Jig A Mortise for a Hinge. Quick, clean, and accurate that s the only way to describe the mortise you get with a trim router and this hinge mortising jig. One of the make it or break it

CUTTER BLOCKS. Knives HSS & Carbide Tipped

C CUTTER BLOCKS Knives HSS & Carbide Tipped 185 UNIVERSAL TOOLHEAD High tensile steel body toolhead with 2 teeth Supplied with 12, 24 or 36 sets of solid HSS knives Custom profiled knives available on

Drills - Metal - Wood - Masonry - Glass & Tile DRILLS

Drills - Metal - Wood - Masonry - Glass & Tile DRILLS Wood Metal Masonry Specialty Materials 8 Catalogue Code Page Hard wood & soft wood Wood & nails Plywood Chipboard MDF Laminated particle board Steel

The importance of precision cutting requires special accessories

Microstops and Drilling Accessories The importance of precision cutting requires special accessories to aide in drilling accuracy, providing tighter tolerances while protecting surface areas from skin-damage.

HIGH PRECISION DOWEL DRILLS FOR CHIP-FREE HOLE EDGES SHANK 10mm DIAM. X 30mm LONG

D40L HIGH PRECISION FOR CHIP-FREE HOLE EDGES SHANK 10mm DIAM. X 27mm LONG D40N HIGH PRECISION THROUGH HOLE DRILL BITS SHANK 10mm DIAM. X mm LONG 27 24 D40L05L D40L05R 5 D40L08L D40L08R 8 High precision,

Machine Tool Accessories

Machine Tool Accessories 33-00 Fiber Adapter Bushing Used to downsize the bore for smaller shank diameters. Bushings are not recommended for production routing. They should be used only as a temporary

The Durham Woodworking Club. January 31, 2016

The Durham Woodworking Club January 31, 2016 A router is a tool used to rout out (hollow out) an area in the face of a relatively hard workpiece, typically of wood or plastic. The main application of routers

Holemaking Products & Accessories

Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get

CNC router cutters & chucks

CNC router cutters & chucks Products Page Universal assembly supports for chucks 176 CNC chucks 176~180 Precision collets 180-181 Cutter arbor 182-183 MK2 chucks 183 olid carbide spiral bits 184~190 CNC

ICS CUTTING TOOLS, INC 511 Main Street Casco, WI USA (920) Fax (920)

ICS CUTTING TOOLS, INC 511 Main Street Casco, WI 54205-0125 USA (920) 837-2526 Fax (920) 837-2530 www.icscuttingtools.com info@icscuttingtools.com COMBINED DRILL & COUNTERSINKS COBALT PLAIN TYPE...5 BELL

SINGLE POINT TOOLS. Mini Boring Bars Mini Boring Bars come in a range of diameters from to inch. They are fluted for maximum strength.

SINGLE POINT TOOLS All single point tools are designed for internal machining on a lathe. The helical boring bars can be used for both lathe and mill applications. All cutting tools are made from premium

Not just another tooling company - Allied Tool Group

2929111112929 Not just another tooling company - Allied Tool Group Allied Tool Group is dedicated to your long-term success. It is our primary mission to be your trusted resource within the tooling industry.

Drill Bits & Hole Saws

F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill

Listed below are some of our most common drill designs used in many various aerospace applications:

www.lomas.co.uk Tools can be manufactured in 3 material choices for use on composites: Solid Tungsten Carbide Tooling CVD Diamond Coated Solid Tungsten Carbide Polycrystalline Diamond (PCD) LOMAS design

Trade of Toolmaking Module 1: Induction & Bench Fitting Unit 4: Hole Tapping Phase 2

Trade of Toolmaking Module 1: Induction & Bench Fitting Unit 4: Hole Tapping Phase 2 Published by SOLAS 2014 Unit 4 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction...

Axminster Single Hinge Jig

Code 100714 Axminster Single Hinge Jig (Clamp not supplied) Index of Contents Page Index of Contents 2 Copyright 2 Introduction 3 What s in the Box 3 General Instructions for Working Practice/Safety 3

Information Guide for Tools and Fabrication Techniques

Information Guide for Tools and Fabrication Techniques Our Innovation. Your Imagination. Table of Contents General Tooling Information.... 4-5 Standard woodworking tools.. 4 Pocket screw.. 4 Heat guns

Solid Carbide Thread Milling Cutters

Solid Carbide Thread Milling Cutters Second Edition Thread milling cutters by Features and Benefits: Sub-micro grain carbide substrate Longer tool life with tighter tolerances More cost-effective than

START-UP KITS. Tool kits for BIESSE ROVER NC processing centre tooling. for

START-UP KITS Tool kits for BIESSE ROVER NC processing centre tooling for 2 START-UP KITS 3 HT HT PRO HT NESTING HT NESTING PRO The quality of Biesse Rover NC processing centres meets the cutting-edge

Drills - Metal - Wood - Masonry - Glass & Tile DRILLS

Drills - Metal - Wood - Masonry - Glass & Tile DRILLS Wood Metal Masonry Glass & Tile 10 Catalogue Code Page Hard wood & soft wood Wood & nails Plywood Chipboard MDF Laminated particle board Steel Hard

Power Tool Accessories

Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Steel Hawg Cutters Threaded Steel Hawg Cutters Faster cutting: Alternating tooth form geometry makes fast work of cutting steel Long life: Abrasion-resistant

+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need

Mechanical Drawing. Fig 5-1

College of Engineering 1 Mechanical Drawing Mechanical Engineering Department Mechanical Drawing Lecture 5 Keys and keyways 5-1 Introduction A key, Fig. 5.1, is usually made from steel and is inserted

Aircraft Quality Reamers and Special Tooling

C A T A L O G 2 6 www.reamers.com Aircraft Quality Reamers and Special Tooling Manufactured in the USA since 1881 AIRCRAFT QUALITY REAMERS AND SPECIAL TOOLING P R O V E N P R E C I S I O N Since 1881,

START-UP KITS. Tool kits for BIESSE ROVER NC processing centre tooling. for

START-UP KITS Tool kits for BIESSE ROVER NC processing centre tooling for 2 START-UP KITS 3 HT HT PRO HT NESTING HT NESTING PRO The quality of Biesse Rover NC processing centres meets the cutting-edge

Advanced Drilling Equipment Cutting Tools

Advanced Drilling Equipment Cutting Tools January 2015 2014 APEX TOOL GROUP 1 Product Overview Precision Good surface finish Fit to application special cutter with tight hole tolerance Advanced Drilling

TREND SNAPPY DRILL SYSTEM

TREND SNAPPY DRILL SYSTEM QUICK CHUCKS POWER DRILLS IMPACT DRIVERS FLAT BIT 7 PIECE SET 233 QUICK CHUCKS 229 HAND-DRIVER 229 DRILLS & COUNTERBORES 230 COUNTERSINKS 231 DE-BURRING COUNTERSINKS 231 PLUG

Plus Our NEW Quick Delivery Step Drill Program

LE ADING SOLUTIONS FOR CHAMFERED / THRE ADED HOLES Plus Our Quick Delivery Step Drill Program CHAMFERED / THREADED HOLE SOLUTIONS From standard stocked tools to our Quick Delivery Program a full range

Introduction. Visual Index

Visual Index Jointing Barley Twist Caravan Groovers Pages 87 90 Page 91 Page 92 Pages 93 96 Burrs Solid Surface Spares Drilling & Boring Bits Page 97 Pages 98 112 Pages 113 114 Pages 115 123 Solid Carbide

(Fig 1) Column to Base 1. Place Column (7) on the Base (13) and align holes in the Column with holes in the Base. 2. Attach using Bolt Washer and Spring Washer hole through the Column and into the Base.

no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side

Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable

PREVIEW COPY. Portable Power Tools. Table of Contents. Pneumatic Drills and Hammers Lesson Four Screwdrivers, Nutrunners, and Wrenches...

Portable Power Tools Table of Contents Lesson One Lesson Two Lesson Three Electric Drills...3 Electric Hammers...19 Pneumatic Drills and Hammers...33 Lesson Four Screwdrivers, Nutrunners, and Wrenches...49

Flexible Diamond Disc

Diamond Burs - with 2.37mm HP Shanks The abrasive properties of Diamond bonded to the tool ensure fast, easy action & long durability. Used for engraving, drilling, cutting, cleaning castings, etc. Always

Catalog 2014/2015. The Perfect 10! Rated the #1 Overall Router Bits

Catalog 2014/2015 aw blades & knives s pare parts WOOD CHOICE R O U T E R Magazine The Perfect 10! Rated the #1 Overall Router Bits B I T Welcome to the 2014/2015 catalog Dear customer, Thank you for your

OUR CORE BUSINESS STRENGTHS

OUR CORE BUSINESS STRENGTHS Consistently reliable delivery of a proven service and product quality Union Grove Saw and Knife was founded in 1983 with a strong desire to become a regional tool company known

Catalog Drilling & Tapping Consumables

Catalog 0 Drilling & Tapping Consumables MAGTRON MB0 MAG-DRILL The Magtron electro-magnetic drilling machine has been designed, developed and manufactured to the very highest standards to provide users

Masonry Tools Index. Impact Hammer Drills. Percussion Bits. Spline Bits, Impact Hammer. Percussion Core Drills. Masonry Drill & Sets

Index Impact Hammer Drills Type 606 Slot Drive System...... 112 Type 609 Extra Heavy-Duty...... 114 Masonry Drill & Sets Type 214 All-Purpose, HD........ 110 Type 215 Fast Spiral, HD........ 108 Type 216

HSK63F HSK63F FC1 COLLET CHUCKS HSK63F WITH BALL BEARING COLLET NUT COLLET CHUCKS HSK63F WITHOUT BALL BEARING COLLET NUT

HSK63F COLLET CHUCKS HSK63F WITH BALL BEARING COLLET NUT Collet chucks with hollow taper shank V DIN 69893-6 FORM F Suitable for spring collets manufactured to DIN 6388 or DIN 6499 Ball bearing collet

Greenfaulds High School

Greenfaulds High School Technical Department Standard Grade Craft & Design Knowledge & Understanding In Metal Page 1 Metals All metals in use today are either PURE METALS or ALLOYS. Copper, iron, tin,

Tools Step Drill Bits

Step Drill Bits ompany PLs -more & 1701 shown 1701T shown 1702 shown 1702T shown A Drives A s Split Point Step Drills The spiral flutes of RUKO high-performance step drills are BN-ground from the solid

Twist Drills for Woodworkers. Standard twist drills and two methods of sharpening 10 January 2015 Marc Pohm

Twist Drills for Woodworkers Standard twist drills and two methods of sharpening 10 January 2015 Marc Pohm Twist Drills for Woodworking Topics that will be covered: Coatings Steel Types Drill Points Drill

Flush Trimmer Jig By Santanu Lahiri

Flush Trimmer Jig By Santanu Lahiri I found this jig in a book published by the Fine Woodworking people: Ingenious Jigs And Shop Accessories, publisher Taunton Press, ISBN# 1-56158-296-4. The Author is

COLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004

1 COLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004 I. OBJECTIVE To provide an overview and basic knowledge of the

FITTING INSTRUCTIONS

COMMERCIAL HINGES SECTION 2.1 SHEET 1 of 14 ISSUE: May, 2003 FITTING INSTRUCTIONS: Position and Clearances STERLING and Sterling STORM Standard Hinge Series 2.1.1 Storm Standard hinges are designed to

HSS Specialists. Special design high speed steel drills for special machining tasks

HSS Specialists Special design high speed steel drills for special machining tasks Guhring s HSS Guhring has been a specialist in drilling tools for more than a century. This not only applies to the broad

Get a $25 DriveKore Gift Card with Your Purchase!

Drill Bit Promo Get a $25 DriveKore Gift Card with Your Purchase! DRILL BIT PROMOTION BUY $100 in DRILL BITS & GET a $25 DriveKore Gift Card Offer valid on all stocked drill bits & sets: Offer valid through

Installation Type. Edge of Door. Pull (Hinge) Side Mounted. Hinge Edge of Door. Push (Stop) Side Mounted

Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed to avoid the possibility

MT/JIG USA RTD AB

4609 MT/JIG USA RTD000007AB Items Enclosed x Bag B x x x x6 Bag A x x x x x4 x x4 x x x x x4 x x For Technical Support email: technical@trend-usa.com -- Description of parts Male adjustable lever Top plate

TRAINING MANUAL. Part 3 REAMERS

PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 3 REAMERS 1 Purpose of Reamers REAMERS A reamer produces an accurate and highly finished round hole to a much finer tolerance than that produced by a drill.

Threading - Hand Taps - Button Dies - Die Nuts - Screw Extractors - Holders - Sets THREADING

Threading - Hand Taps - Button Dies - Die Nuts - Screw Extractors - Holders - Sets THREADING Threading Threading Index 198 Dies Carbon, Button Dies BA 198 Dies Carbon, Button Dies BSB 197 Dies Carbon,

Fast and flexible use Powerful results

Fast and flexible use Powerful results CORDLESS DRILLS AND BITS DRILL BIT GUIDE Turbo Stone Brad Point Bit Flat Wood Bit Lewis Auger Bit HSS-G Super-Pro Twist Drill Multimat Allmat Ceramic Master Concrete

Cutting Tools. Round Tooling TMX-TOOL Fax

Round Tooling +1-508-653-8897 844-TMX-TOOL Fax +1-508-653-5110 www.tmxtools.com 245 Quick Lookup Round Tooling DRILLS...247 ANNULAR CUTTERS...295 REAMERS...299 COUNTERBORES AND COUNTERSINKS....321 CARBIDE

IC LEARNING SERIES. Marking Out, Measurement, Fitting & Assembly

IC LEARNING SERIES Marking Out, Measurement, Fitting & Assembly The Hong Kong Polytechnic University Industrial Centre IC LEARNING SERIES Marking Out, Measurement, Fitting & Assembly Suitable for the following

SHAPING AND PLANING Shaping and planing

SHAPING AND PLANING Shaping and planing the simplest of all machine operations Straight line cutting motion with single-point cutting tool creates smooth flat surfaces. Mainly plain surfaces are machined