HSK-F63 Clamping nut without bearing ER HSK-F63 Clamping nut with bearing ER * To be used with collet
|
|
- Collin Virgil McDaniel
- 5 years ago
- Views:
Transcription
1 abre Tools with ore Router its & ets Kinetic ust Extractor KINETIC UT EXTRACTOR 992 Removes MF & Chipboard dust from the workpiece ECRIPTION Kinetic ust Extractor for chucks with IN6388/EOC25 collets EOC25 Kinetic ust Extractor for chucks with ER32 collets ER32 Kinetic ust Extractor for chucks with ER40 collets ER40 pare parts Easy to use! Install & remove as a clamping nut - Health & afety - Tool Performance & Cut Quality - Tool Life & Labor Costs - Recoended for Nesting and Routing operations - No wasted time during work process - Replaces the standard clamping nut - uitable for any collet chucks with standard router bits - Available for ER32 - ER40 - ECO25 (IN6388) collets - The thick ceramic coat gives to KE an anti-corrosion, anti-friction and anti-static surface. - Tool body in light alloy - etter air quality - Good performances even at low rpm: from 6,000 up to 20,000 rpm - Material: chipboard, coated chipboard, MF, Corian, plasterboard, O, HPL. Watch the video on C-panner uction Hose ownload Instruction Watch Video Compressed Air ust Air Vacumed its for Hand Working WITHOUT Kinetic ust Extractor Working WITH Kinetic ust Extractor & pare Parts 216
2 HK Chucks for ER40 Precision Collets ECRIPTION HK-F63 Clamping nut without bearing ER HK-F63 Clamping nut with bearing ER * * uitable for right-hand and left-hand rotation. For Homag, Eima, IMA from 9/94, ubus, Weeke, iesse, CM, Morbidelli and Masterwood machines. abre IO30 Chucks for ER40 Precision Collets For iesse machines IO30 ER40 Ø Tools with ore 57 M50x1, For iesse machines with Omlat engine, ulleri, usellato, CM and IMA machines For Alberti and Masterwood machines. Clamping Nuts for Chucks with ER40 Precision Collets ECRIPTION IO30 ER40 Ø IO30 ER40 Ø12, Clamping nut without bearing For /211/221/310 chucks Clamping nut with bearing For /211/221/310 chucks Router its & ets its for Hand Ø63 C-spanner for ER40 Precision Collets ECRIPTION C-panner for ER40 precision collet & pare Parts 217
3 HK Chuck for ER32 Precision Collets ECRIPTION HK-F63 Clamping nut without bearing ER HK-F63 Clamping nut with bearing ER * abre 73 * uitable for right-hand and left-hand rotation. For Homag, Eima from 9/94, ubus, Weeke, iesse, CM, Morbidelli and Masterwood machines. Tools with ore Router its & ets its for Hand IO30 Chucks for ER32 Precision Collets IO 30 ER32 Ø For iesse machines IO 30 ER32 Ø For iesse machines with Omlat engine, ulleri, usellato, CM and IMA machines IO30 Chucks for ER32 Precision Collets * IO 30 ER32 Ø12, For Alberti and Masterwood machines without aluminium flange IO 30 ER32 Ø8, For Morbidelli and CM machines with aluminium flange already assembled Ø69,5. IO 30 ER32 Ø8, pare parts Ø69,5 aluminium flange * & pare Parts 218 Ø50 Ø69,5 For Morbidelli and CM machines.
4 Chucks for ER32 Precision Collets /100 MK2/M30x1,5 ER MK3/M30x1,5 ER MK2/MK3 tapered shank 62 abre Chucks for ER32 Precision Collets For machines with P Leuco system. Ø25x55 ER32 P LEUCO Tools with ore Router its & ets Clamping Nuts for Chucks with ER32 Collets M40x1,5 Ø ECRIPTION Clamping nut without bearing For /100/200/250/300/400 chucks Clamping nut with bearing For /100/200/250/300/400 chucks its for Hand C-panner for ER32 Precision Collets ECRIPTION C-panner for ER32 precision collets & pare Parts 219
5 HK Chuck for IN EOC25 Precision Collet ECRIPTION HK-F63 HK chuck with bearing nut EOC * pare parts Clamping nut with bearing abre 77 * uitable for left-hand rotation too. For Homag, Eima from 9/94, ubus, Weeke, iesse, CM, Morbidelli & Masterwood machines. Tools with ore Router its & ets Clamping Nuts M48x2 Ø ECRIPTION Clamping nut without bearing Clamping nut with bearing For chuck its for Hand & pare Parts 220 C-panner for IN6388 & ER Precision Collets IN ,5 ECRIPTION C-panner for UAG EOC-25 inches / EOC-16 inches / inches 13 1/ / inches /
6 Precision Collets IN ER ER ,5 - replaceable td ER11 collets (from 1 to 7) ,7 wide clamping tolerance 21 - replaceable td ER20 collets (from 1 to 13) ,7 wide clamping tolerance 33 For chucks /100/200/250/300/400 - replaceable td ER32 collets (from 3 to 20) ,7 wide clamping tolerance Remark: special dimensions available on request ER , , ER , , ,5 - replaceable td ER16 collets (from 1 to 10) ,7 wide clamping tolerance replaceable td ER25 collets (from 1 to 16) ,7 wide clamping tolerance For chucks /211/221/310 - replaceable td ER40 collets (from 3 to 25) ,7 wide clamping tolerance ER ER , abre Tools with ore Router its & ets its for Hand & pare Parts 221
7 abre Cap Nuts for CNC Machines Ø20x14 F.1 M30x1,5 38 spanner M33x3 IO30 Retaining tuds Internal thread For machines with M33x3 threaded spindle nose. Ø20x14Fx M30x1, Tools with ore Router its & ets Cutter Arbor with HK Tapered hank ECRIPTION 1 2 for /201 iesse chucks for /211 iesse, Omlat, ulleri, usellato, Weeke and IMA chucks for /221 Alberti-Masterwood chucks 9 12, for /251 CM - Morbidelli chucks 6,5 8, for P and Leuco chucks M d HK-F63 Ø30x HK-F63 Ø30x HK-F63 Ø35x HK-F63 Ø40x For Homag, Eima from 9/94, ubus, Weeke, iesse, CM, Morbidelli and Masterwood machines. its for Hand 100 d Flange Cutter Arbor with IO30 Tapered hank For iesse machines. 3 IO 30 Ø30x pare Parts for Chucks tandard Optional ECRIPTION ECRIPTION & pare Parts M6x25 TCEI screw teel flange for with Ø30 arbors - Male M teel flange for with Ø35 arbors - Male M teel flange for with Ø40 arbors - Male M Optional teel flange for with Ø30 arbors - Female teel flange for with Ø35 arbors - Female teel flange for with Ø40 arbors - Female F F F 222
8 Universal Assembly upports for Chucks 183 aw lade Arbor with Parallel hank 97,5 60 Ø pare parts Collet Chucks Clamp with MK2 Tapered hank ECRIPTION Universal assembly supports for chucks HK-F HK Universal assembly supports for chucks IO IO For HK-F63 and IO30 chucks CMT now offers universal assembly supports for HK-F63 and IO30 chucks. Thanks to the bidirectional roller bearings, which clamp the tooolder to the flange, the system offers the highest protection to the tool taper and clamps are no longer needed. The special bidirectional roller bearing clamps the tooolder to the flange, offering the highest protection to the tool taper. 123 pare parts Pin MK2/Ø20x14Fx L /M6/48 97, M6x10 TCEI screw allen key allen key Clamping nut Clamping nut Type UAG c-spanner abre Tools with ore Router its & ets its for Hand 62 Collets for 123 Chucks , , , & pare Parts 223
2016/2017 THE WIDEST TOOLING RANGE. Catalogue. Overall Rating 10! Top Performing Router Bits. English edition. Jig Saw Blades. Tools for Multi-Cutters
abre Tools with ore Router its & ets Cutters & Chucks its for Hand aws Accessories Catalogue English edition 2016/2017 THE WIET TOOLING RANGE Overall Rating 10! Top Performing Router its 1994 Welcome to
More informationCatalog 2014/2015. The Perfect 10! Rated the #1 Overall Router Bits
Catalog 2014/2015 aw blades & knives s pare parts WOOD CHOICE R O U T E R Magazine The Perfect 10! Rated the #1 Overall Router Bits B I T Welcome to the 2014/2015 catalog Dear customer, Thank you for your
More informationCNC router cutters & chucks
CNC router cutters & chucks Products Page Universal assembly supports for chucks 176 CNC chucks 176~180 Precision collets 180-181 Cutter arbor 182-183 MK2 chucks 183 olid carbide spiral bits 184~190 CNC
More informationWelcome to the 2016/2017 catalogue
Welcome to the 2016/2017 catalogue ear Customer, Thank you for your interest in CMT products. Take a moment to browse our catalogue and choose from a wider range of innovative and state-of-the-art woodworking
More informationTHE WIDEST TOOLING RANGE CATALOGUE ENGLISH EDITION 2018
THE WET TOONG RANGE CATAOGUE ENGH ETON 2018 aw Blades Jig aw Blades abre aw Blades Tools for Multi-Cutters Tools with Bore & Knives Router Bits & ets CNC Router Cutters & Chucks ndustrial owel rills Bits
More information2016/2017 THE WIDEST TOOLING RANGE. Catalogue. Overall Rating 10! Top Performing Router Bits. English edition. Jig Saw Blades. Tools for Multi-Cutters
abre Router its & ets Cutters & Chucks owel rills aws Accessories Catalogue English edition 2016/2017 THE WET TOONG RANGE Overall Rating 10! Top Performing Router its 1994 Welcome to the 2016/2017 catalogue
More informationBits for hand power tools
Bits for hand power tools Products Page Adaptors 232-233 nterchangeable boring bits 233 Boring bits 234~237 Mortise chisel & bit set 237 Plug cutters & ets 238-239 Forstner bits 240-241 Brad point bits
More informationDowel Drills and Boring Bits
owel rills and Products Page XTreme owel rills 145 ~ 147 2 Flute owel rills 148 ~ 149 4 Flute owel rills 150 ~ 152 olid Carbide Twist rills and Adaptors 153 4 Flute owel rills for Through Holes 154 2 Flute
More informationClamping systems 9.2
9. Clamping systems Clamping systems Clamping system produced in the form of collet chucks, clamping arbors, hydro sleeves and special sleeves. Clamping elements are designed for precise locating of tools
More informationStile & panel router bits 8/970
tile & panel router bits 8/970 These bits can be used for decorative work on solid wood panels and MF materials. Use them in one pass or in combination with CMT s MF panel bits for complex and intricate
More informationDowel drills. Adaptors 250. Drill holders 251. X-Treme dowel drills 254. Solid carbide twist drills 259. Dowel drills 260
owel drills Adaptors 250 rill holders 251 X-Treme dowel drills 254 Solid carbide twist drills 259 owel drills 260 Countersinks for dowel drills 266 owel drills for through holes 269 Hinge boring bits 270
More informationRouting. Leitz Lexicon Edition 7
Routing Leitz Lexicon Edition 7 Explanation of abbreviations A a e APL APT AL AM A b B B BEM BEZ BH BO CNC = dimension A = cutting thickness (radial) = cutting depth (axial) = dimension = panel raising
More information2016/2017 THE WIDEST TOOLING RANGE. Catalogue. Overall Rating 10! Top Performing Router Bits. English edition. Jig Saw Blades. Tools for Multi-Cutters
abre & ets Cutters & Chucks ndustrial owel rills aws Accessories Catalogue English edition 2016/2017 THE WET TOONG RANGE Overall Rating 10! Top Performing 1994 Welcome to the 2016/2017 catalogue ear Customer,
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationROUTER BITS. Tooling Group Straight Bits. Insert Roundover Bits 2-7. Spiral Solid Carbide Bits. Insert Rabbeting Bits 2-8
ROUTER BITS Tooling Group 2 Straight Bits 2-2 Insert Roundover Bits 2-7 Spiral Solid Carbide Bits 2-3 Insert Rabbeting Bits 2-8 Insert Straigh Bits 1 flute 2-4 Dovetail Bits 2-9 Insert Plunging Straight
More informationClamping Tools
Clamping Tools 800-544-8436 www.guho.com Universal CNC Boring Chuck 21030 - Series 80 AB* No. A D For Weeke, Maka, Reichenbacher, etc. SK 30 1 90 50 1-13 21030-0-13002-0 For Biesse up from 9/92, Masterwoo
More information2.0. Retaining Elements. Flange Adapters. Adjustable Flange Adapters. Reducing Adapters. Reducing Sleeves. Adaption of Clamping Device
2.0 Retaining Elements Flange Adapters Adjustable Flange Adapters Reducing Adapters Reducing Sleeves Adaption of Clamping Device Special Adapters NEIDLEIN-SPANNZEUGE GmbH. Erlenbrunnenstraße 3. 72411 Bodelshausen
More informationMachine Tool Accessories
Machine Tool Accessories 33-00 Fiber Adapter Bushing Used to downsize the bore for smaller shank diameters. Bushings are not recommended for production routing. They should be used only as a temporary
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationCatalog 2014/2015. The Perfect 10! Rated the #1 Overall Router Bits
Catalog 2014/2015 aw blades & knives s ndustrial pare parts isplay cabinets WOO CHOCE R O U T E R Magazine The Perfect 10! Rated the #1 Overall Router Bits B T Welcome to the 2014/2015 catalog ear customer,
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationCompatibility overview of accessories for milling machines
Compatibility overview of accessories for milling machines Accessories Item No. BF16 BF20/L MB4 F40E BF30 MT3 Copy and planing cutter head MT 2 3350212 BF30 BF46 BF46 ISo30 ISO40 MT4 MF1 MT 50 MT2BV Mf2
More informationTOOL HOLDERS Useful information:
TOOL HOLERS Useful information: SISTEMI has always been known for the high quality of the products offered. Keywords of this success are the attention to production materials and the use of the most modern
More informationISO 9001.CE. MONASET Tool Grinder.
ISO 9001.CE MONASET Tool Grinder www.topwork.com.tw FEATURE CM-A & CM-2 sharpen and recondition complex tool shapes and parts. Turntable and guide bar allows workpieces grinding from different direction.
More informationLOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS
LOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS High RPM All Royal CNC collet chucks are balanced by design for high-speed operation, and can often be run at higher speeds than conventional 3-jaw chucks because
More informationHM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System
HM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System Ex GST Inc GST $5,500.00 $6,325.00 ORDER CODE: MODEL: Digital Readout: Type: Table Size
More informationProduct Overview. for perfect connections
Product Overview for perfect connections TOOL HOLDERS FOR DRILLING, TAPPING & REAMING Smart solutions for high quality clamping systems in tapping applications Tapping solution range from M1 M200 Quick
More informationCAT40 Toolholders ER11
CAT40 ER11 CAT40 & Straight Shank ER11 Collet Chucks (Balanced to G2.5@18,000 RPM) Small diameter nose well-suited for working in close quarters Increased flexibility for milling, drilling, and reaming
More informationHSK63F HSK63F FC1 COLLET CHUCKS HSK63F WITH BALL BEARING COLLET NUT COLLET CHUCKS HSK63F WITHOUT BALL BEARING COLLET NUT
HSK63F COLLET CHUCKS HSK63F WITH BALL BEARING COLLET NUT Collet chucks with hollow taper shank V DIN 69893-6 FORM F Suitable for spring collets manufactured to DIN 6388 or DIN 6499 Ball bearing collet
More informationCATALOGUE ROUTER BITS P 01
CATALOGUE P 01 1 Summary ECO-LINE NEW-Mini =1+1 router bit P HW - HWM P ECO-LINE p. 3 WHOLE TIPS p. 6 STRAIGHT CUTTING EGE TOOLS p. 21 HELICAL TOOLS p. 22 CHUCKS p. 31 ACCESSORIES p. 39 HP-LINE p. 8 HELICAL
More informationThe Ensat self-tapping threaded insert...
The nsat self-tapping threaded insert... nsat is a self-tapping threaded insert with external and internal thread, cutting slots or cutting bores. A continuous process of further development has brought
More informationHM-50 - Turret Milling Machine Package with Digital Readout & Tooling Accessories (X) 600mm (Y) 220mm (Z) 340mm
HM-50 - Turret Milling Machine Package with Digital Readout & Tooling Accessories (X) 600mm (Y) 220mm (Z) 340mm ORDER CODE: MODEL: Digital Readout: Type: Table Size (mm): Column Type: Spindle Taper - Vertical:
More informationCompatibility overview of accessories for milling machines
Compatibility overview of accessories for milling machines Accessories Item No. BF16 BF20/L MB4 F40E BF30 MT3 BF30 ISo30 BF46 ISO40 BF46 MT4 MF1 MT 50 MT2BV MF2 MF4 MT100 MT 200 MT 8 MX 3 MX 4 MT8 Copy
More informationCMT Molding system 8/ / I Router Bits & Sets. Saw blades. Tools with bore & Knives. CNC Router Cutter & Chucks
CMT Molding system aw blades 8/956.852 f the standard selection of molding and mill work you find in today's lumber shops isn't satisfactory to your woodworking tastes, then look to CMT's molding system
More informationTAPPING CHUCKS & COLLETS
TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression
More informationE2000 Ultra-high-Speed & Super-Precision
E2 E2 UltrahighSpeed & SuperPrecision www.nakanishiinc.com NAKANISHI INC. 216 PRK333E Ver.2 '16.11.3.I Specifications and design are subject to change without notice. Headquarters Factory 7 Shimohinata,
More informationShaft coupling: compensation of mismatching shaft ends (see page B 117) Flange bearing: linear drive bearing (see page B 96)
Overview Linear Drives At the employment of linear drives, the directly or via a toothed belt driven spindle is the most frequently applied variant. Motor flange bearing End flange bearing (two angular
More informationBIG BORE 2G chucks BB-N-EXL2G BB-AZ2G BB-FZA2G BB-EXL-SC2G
Clamping of pipe with IG ORE 2G chucks -Z2G -FZ2G -EXL-C2G IG ORE elf centering Extra long jaw stroke Jaw jogging IG ORE -Z2G elf centering or compensating Extra long jaw stroke afety features: : Pressure
More informationEMS-2025scl 230v. Sliding Compound Mitre Saw Fig.1. Revision Date 26/01/2006
Fig.1 Fig.2 701 inc 2,702,703,704 1 Base 93 089100102700 Space washer Base Assembly Parts (A) 30.23 94 Screw, for base, 45 152 Miter scale label, 2 089100102002 Rubber feet 0.10 702 Pivot Shaft & Screw
More informationPIONEER TOOL HOLDING SOLUTIONS
PIONEER N.A., INC. PIONEER TOO HODING SOUTIONS 2018 CATAOG www.pioneerna.com PIONEER DUA CONTACT What is Dual Contact Dual Contact spindle gageline is ground to a controlled dimension to the taper of the
More informationModel No: SM2502. Parts Information: Mini Drilling & Milling Machine
Page 1 of 6 Page 2 of 6 Page 3 of 6 1 SM2502.001 BASE 2 SM2502.002 X-AXIS FEEDING SCREW -- SM2502.002-1 KEY 4x16 4 SM2502.004 DIAL 5 SM2502.005 HAND WHEEL 6 SN8.S STEEL NUT M8 ZINC DIN934 (SINGLE) 7 SM2502.007
More informationPSK Tool Holders. Chapter 2 of the Product Catalogue 2010/2011 Precision Tools
PSK Tool Holders Chapter 2 of the Product Catalogue 2010/2011 Precision Tools PSK - Polygonal Kelch GmbH Tel.: +49 (0) 71 51 / 2 05 22-0 Fax: +49 (0) 71 51 / 2 05 22-11 info@kelchgmbh.de www.kelchgmbh.de
More information25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.
25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1
More informationFace Drivers FSP / FSPB
4 Face Drivers FSP / FSPB NEIDLEIN-SPANNZEUGE GmbH Face Drivers FSP / FSPB with drive disk and movable center pin The entire surface of the workpiece can be tooled and finished by clamping with a maximum
More informationHM-54GV - Turret Milling Machine Inverter Variable Speed, Geared Head Horizontal & Vertical
HM-54GV - Turret Milling Machine Inverter Variable Speed, Geared Head Horizontal & Vertical Ex GST Inc GST (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System $7,250.00 ORDER
More informationTRAV-L-CUTTER Pipe Cutter
TRAV-L-CUTTER Pipe Cutter Horizontal and vertical c utting Fast and accurate cutting and beveling Add mounting chain sections to fit larger diameters COLD CUTTING, COMPACT DESIGN, EASY SET-UP The Wachs
More informationTechnical data and accessories
Technical data and accessories Model MZ 2 MZ 4 3346220 33462 Technical specifications Electrical connection 0 V / 3 Ph ~50 Hz Total connected load 4 kw 5.4 kw Motor rapid motion/feed 0.375 kw 0.75 kw Coolant
More informationCompatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning Face clamping disc Ø 170 mm 3440295 Face clamping disc Ø 240 mm 3441352 Face clamping disc Ø 250 mm 3440552 Face clamping disc
More informationRouting Dibond composite panels
No. 545 Routing Dibond composite panels A Description Aluminium composite panels such as Dibond are used both indoors and outdoors. Thanks to the heavy-duty structured coating, the material is ideal for
More informationSplit Sleeves SL-BO DIN6329 with Morse Taper Split Sleeves SL-GB DIN6328 with Morse Taper
Collets for Page 4 Page 12 Page 13 Page 16 Page 17 Page 20 Page 20 Page 21 Page 21 Page 22 Page 22 Page 22 Page 23 Page 23 Page 23 Page 24 Page 24 Page 24 Collets GER BER ET Taper Wipers KW-ER for Collet
More informationTool Clamping. Delivery Programme
Delivery Programme Collets, Clamping Nuts and Wrenches for Page 4 Page 15 Page 16 Page 19 Page 21 Page 22 Page 22 Page 23 Page 23 Page 24 Page 24 Page 24 Page 25 Page 25 Collets GER CER CET DIN ISO 15488
More information.01 undercut. Ø.187 locating dowel hole (Ø.1875 x.50 pin included)
Mold Components 1 SPRUE BUSHINGS Made of AISI 6150 material; precision ground; polished I.D. Hardened to Rc 46-50 Dowel pin hole in head for locating (pin included) Radius under head with undercut to reduce
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More informationTHE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines
THE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines turning milling drilling WABECO lathes > D2000 D2400 D3000 precise lead screw lathe in-house design and production the classics - tried
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 3" versatile for many applications for
More informationModel No: SM2503. Parts Information: Mini Lathe & Drilling Machine
Page 1 of 5 Page 2 of 5 1 SM2503.001 CHANGE GEAR COVER 2 SM2503.002 CAP SCREW M4x8 3 SM2503.003 CAP SCREW M4x12 4 SM2503.004 HINGE L*B=38*31 5 SM2503.005 WASHER 4 6 SN4.S STEEL NUT M4 ZINC DIN934 (SINGLE)
More informationWorkpiece Clamping. Collets for Workpiece Clamping Collet Chucks for Workpiece Clamping
Workpiece Clamping Collets for Workpiece Clamping Collet Chucks for Workpiece Clamping Overview of Contents Page Collets for Workpiece Clamping Draw-in Collets DI 2 Dead Length Collets DL 3 Emergency Dead
More informationPrecision Retention Knobs and Setup Equipment
Precision Retention Knobs and Setup Equipment Retention Knobs All mating surfaces are precision ground Manufactured to the highest standards for maximum safety and long life ightening Fixtures Preset tools
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 80 mm versatile for many applications for
More informationRouting Alucobond composite panels
No. 546 Routing Alucobond composite panels A Description Alucobond composite panels can be shaped with an extremely easy processing technique. The process, the routing and folding technique, makes it possible
More informationPF 3000 Face Milling Cutter
Perfection in machining PF 3000 Face Milling Cutter UHRIN YOUR WORLD-WIDE PARTNER ADVANTAES axially adjustable inserts standard tool Ø 63 250 available ex-stock reduced spindle loading thanks to light
More informationMODEL RA-200N RADIAL ARM SAW
ITEM NO PART NO DESCRIPTION PRICE 1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900079 CONICAL SPRING 16.3 X 31.5 X 1.2 0.78 3 6940444 OUTER FLANGE 4.49 4 6940443 INNER FLANGE 4.91 5 6100509 PARALLEL
More informationHARDINGE Precision Tooling Systems for Mills
www.hardinge.com HARDINGE Precision Tooling Systems for Mills Precision Tool Holding Systems for Mills Hardinge. Solid since 890. At Hardinge, our mission is to provide the Best Value in workholding products
More informationACCESSORIES.
Rotary, Dividing, & Cross Tables 166 Indexes 167 Dividing Heads 168 Screw Jack Sets 168 Angle Plates & V-Blocks 169 Quick Change Tool Posts & 170-171 CNC Tool Holder Bushings 171 Lathe Chucks 172-177 www.sowatool.com
More informationNC / ER 夾頭柄. WEIGHT (KGS) SYIC C32 x NC/ER M18 x 1.5P 0.70 SYIC C32 x NC/ER
N / ER E U B Y-04760 N / ER 夾頭柄 l3 t1 d his is specially suitable for N Machines but can also be used for general machines. t the end of body, there's an 0-ring for sealing. N M RN F BRNG ME N. YPE x d
More informationnew Saw blades Flooring router bits B - 024B Lock miter set 8/955 Tools with bore & Knives Router Bits & Sets
Flooring router bits new aw blades 822.023B - 024B CMT now offers you these industrial quality carbide-tipped router bits for flooring and inlay applications. They can easily and smoothly run through solid
More informationR8 Tool Holders MADE IN EUROPE
R8 Tool Holders MADE IN EUROPE TMX R8 HOLDERS AND KNEE MILLS the perfect pairing of reliability and tradition Image courtesy of the Hardinge Group Though developed in 1936, the knee mill has made a recent
More informationFacing and Boring Heads UPA
Facing and Boring Heads UPA Universal Facing and Boring Heads For use on universal milling and boring machines, jig borers etc. suitable for all types of work in single or series production. Product range
More informationMachinist s Guide to Toolholder Maintenance
Machinist s Guide to Toolholder Maintenance For Collet & Nut Style Toolholders General Overview Modern CNC machines feature high-capacity tool changers that automatically swap toolholders in and out of
More informationMASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationHardinge FlexC Collet System Style D 65mm
Hardinge FlexC Collet System Style D 65mm Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly read
More informationRemarks: Before Installation, please read the instruction carefully.
60 cm antenna Z24A60T37301 Remarks: Before Installation, please read the instruction carefully. This instruction book is for the installation of 0.6m ultra-high performance microwave antenna. Installation,
More informationTools for the toughest demands. Special accessories for routing. A handy guide
Tools for the toughest demands Special accessories for routing A handy guide The Festool router system This part of the router booklet provides information on Festool accessories for routers and edge routers.
More informationDrilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2
TOOLS Page Q 2 Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2 Page Q 3 Changeable carbide drill (WHM) Page Q 3/1 Drilling machine Tonisco
More informationBSF. Large Ratio Automatic Back Counterboring & Spotfacing Tool
BSF Large Ratio Automatic Back Counterboring & Spotfacing Tool Counterbores up to 2.3xd Replaceable carbide coated blades for extended life Very simple to use Suitable for CNC machines with through coolant
More informationLIVE CENTRES FACE DRIVERS
LIVE CENTRES FACE DRIVERS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter
More informationMONASET CM-2. Has these customer proven features...
MONASET CM-2 Has these customer proven features... We looked at our successful Monaset grinder very closely before we came up with the engineering refinements which, when combined with its field proven
More informationM-FOUR (MEW) 90 Milling with Double-sided 4-edge Inserts. Low Cutting Forces with Chatter Resistance for Excellent Surface Finish
M-FOUR (MEW) 9 Milling with Double-sided 4-edge Low Cutting Forces with Chatter Resistance for Excellent urface Finish Economical 4-edge Insert MEWH Helical End Mill Added Improved Toolholder Durability
More informationSHOWA TOOL. GENERAL CATALOG SHOWA TOOL
SHOWA TOOL SHOWA TOOL GENERAL CATALOG www.showatool.com SHOWA TOOL SH INDEX A AS B ADJUST SCREW for MICRON CHUCK H series, M series BC SPARE BLADE CLAMP 67 BK BLADE (For Standard Head) 60 BKF BLADE (For
More informationLIVE CENTRES FACE DRIVERS
LIVE CENTRES FACE DRIVERS 2015/2016 We work for customers who have a weakness for our strengths. Companies intent on making a difference are obliged to develop constantly as well as deploy their strengths
More informationWESCON DSI DESIGNED SOLUTIONS INCORPORATED
WESCON DSI DESIGNED SOLUTIONS INCORPORATED AIRFRAME ASSEMBLY TOOLS AND RELATED SERVICES PHONE 949.444.3807 / FAX 949.916.0236 20551 PASCAL WAY LAKE FOREST, CA 92630 USA "DESIGNED SOLUTIONS" With over thirty-five
More informationGuide Pulley System [GPS]
Guide Pulley System [GPS] The purpose of the guide pulley system is to guide the wire from the dancer pulley system to the guide rollers. Two of these systems exist: on both sides of the machine. The pulley
More informationALBRECHT PRECISION KEYLESS DRILL CHUCKS THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL CHUCKS
ALBRECHT PRECISION KEYLESS DRILL S THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL S ALBRECHT The World's Most Consistently Accurate Drill Chucks For the past 00 years, Albrecht s line of precision drill
More informationACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through
More informationNew Product Listing. Pages SET-TRU CHUCKS 2 Jaw with Soft Top jaws, 3 & 6 Jaw with Solid OD & ID Jaws, 4 Jaw with Two-piece Reversible
NUMERICAL INDEX PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. 714... 9 718... 9 7202... 102 7203... 102 7205... 104 720... 107 7207... 104 7208... 104 7209... 107 7210...
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationTCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES
TCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES BASIC PARAMETERS 3-guideways bed Max. torque on spindle Nm Max. weight of workpiece between centre 30 tonnes Turning length 3,000
More informationCompatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning TU 1503 TU 2004 TU 2304 TU 2404 TU 2506 TU 2807 D 320 TU 3209 D 330 D 360 TU 3610V TZ 4012 D 420 TU 4210V D 460 TU 4615V TZ 5216
More informationSECTION 9: PARTS Column Breakdown
SECTION 9: PARTS Column Breakdown 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 26 27 28 29 3 31 31-1 32 33 34 35 36 37 39 38 47 48 46 45 3644 44 43 40 41 42 24 23 22 52 51 50 30 49 57 58 59 60
More informationWelcome to the 2016/2017 catalogue
Welcome to the 2016/2017 catalogue ear Customer, Thank you for your interest in CMT products. Take a moment to browse our new catalogue and choose from a wider range of innovative and state-of-the-art
More informationTroubleshooting for Milling Chuck. Details of the trouble Cause Solution / Countermeasures
TROUBLESHOOTING 571 Troubleshooting Troubleshooting for Milling Chuck Details of the trouble Cause Solution / Countermeasures Tool cannot be held Tool shank diameter should be within h7 tolerance. Tool
More informationWORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES
EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With
More informationMACHINE TOOL ACCESSORIES
DA80 COLLETS, COLLET CHUCKS AND KITS SERIES 992: Full /32" range of collapse. Concentricity within 0.0005" T.I.R. at collet nose assembled with chuck. Self release for rapid, easy operation. Interchangeable
More informationLeitz-Lexicon. Edition 6
Leitz-Lexicon Edition 6 Explanation of abbreviations A a e a p ABM APL APT AL AM AS b B B BEM BEZ BH CNC = dimension A = cutting thickness (radial) = cutting depth (axial) = dimension = panel raising length
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationProduct Overview. for perfect connections
Product Overview for perfect connections TOOL HOLDERS FOR DRILLING, TAPPING & REAMING üsmart solutions for high quality clamping systems in tapping applications ütapping solution range from M3 M200 üquick
More information1.3. Face Drivers for Grinding. FFBR with Flange Retainer. FBSR with Taper Shank Retainer. FFBR/FBSR Changeable Parts FFB/FFBH.
1.3 Face Drivers for Grinding FFBR with Flange Retainer FBSR with Taper Shank Retainer FFBR/FBSR Changeable Parts FFB/FFBH FFB/FFBH Changeable Parts FBSR PN/FFPR/FBS Special Face Drivers NEIDLEIN-SPANNZEUGE
More informationHAFCO METALMASTER HM-50. Turret Milling Machine. (X) 600mm (Y) 200mm (Z) 340mm. Product Brochure
Product Brochure M160D HAFCO METALMASTER HM-50 Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-11-02 M160D.pdf
More information