Saws for cutting wood, aluminum metal and plastics

Size: px

Start display at page:

Download "Saws for cutting wood, aluminum metal and plastics"

Bennett Willis
5 years ago
Views:

Saws for cutting wood, aluminum metal and plastics ISHAD saw blades are manufactured with the best raw materials

THE STEEL BODY: The high quality steel plate is manufactured with special emphasis on even thickness and absolute

TENSION RING: A tension ring adds to the working stability resisting further side force, thus ensuring excellent

THE BLADE BALANCING AND LEVELING: Each saw is carefully balanced to avoid vibration ensuring side force is reduced,

NOISE REDUCTION: The combination of the lazer cut expansion grooves and hairline lazer cuts further prevents

CARBIDE SUPER HIGH-DENSITY CARBIDE : Super high-density carbide teeth coupled with a new Nano-Grain unique bond will

1 Saws for cutting wood, aluminum metal and plastics ISHAD saw blades are manufactured with the best raw materials available today. THE STEEL BODY: The high quality steel plate is manufactured with special emphasis on even thickness and absolute accuracy in centering the middle bore. TENSION RING: A tension ring adds to the working stability resisting further side force, thus ensuring excellent accuracy and performance. THE BLADE BALANCING AND LEVELING: Each saw is carefully balanced to avoid vibration ensuring side force is reduced, providing clean chip free cuts. NOISE REDUCTION: The combination of the lazer cut expansion grooves and hairline lazer cuts further prevents vibration and reduces noise significantly. CARBIDE SUPER HIGH-DENSITY CARBIDE : Super high-density carbide teeth coupled with a new Nano-Grain unique bond will result in clean cuts for a longer time. OUR TECHNOLOGY INNOVATIVE PRECISION CARBIDE GRINDING: Our R&D team has developed special tooling to reach a ground breaking form of grinding of the carbide teeth. The unique new profile, cleans debris faster from the tip, delivering better chip-free cuts, time after time, for a longer working life. QUALITY CONTROL ISHAD s Quality Control is carried out using the most advanced machinery, sophisticated computerized equipment and flexible job lot management to attain the high standards required by customers around the world.

2 Optimus ISHAD introduces their latest inn

The NEW saw blade has proved to have significant longer life, resulting in improved production and increased profitability.

3 ovation in saw blade technology. The New Generation of s 4X Cutting Power The ground-breaking grinding technique of the carbide tipped saw blade is now available with the introduction of the 4X OPTIMUS. The NEW saw blade has proved to have significant longer life, resulting in improved production and increased profitability. In tests conducted at a leading furniture manufacturer in Israel, the following results were achieved: PARAMETER/ STANDARD 4X OPTIMUS (hard teeth) (ISHAD) 0-96T T-- TCG FEED RATIO CUTTING MATERIAL Manual Melamine, coated Formica WORK FORM CUTTING LIFE without scoring 1 day without scoring 4 days PARAMETER/ STANDARD 4X OPTIMUS (hard teeth) (ISHAD) 0-96T- - TCG 0-96T-- TCG FEED RATIO CUTTING MATERIAL Manual Melamine, coated Formica, various MDF WORK FORM CUTTING LIFE with scoring 3 days with scoring 9 days PARAMETER/ STANDARD (hard teeth) -T-- TCG MACHINE FEED RATIO CUTTING MATERIAL WORK FORM with scoring CUTTING LIFE 2 days 4X OPTIMUS (ISHAD) -T-- TCG (Bridge Saw) Automatic Melamine, Formica, MDF, Hardboard with scoring 4 days

4 Contents: Item name AT 1001 AT AT AT 1006 AT AT ATB 2001 ATB 01 ATB 0 ATB 1 ATB 2006 ATB 06 ATBN 00 ATBN 1-1 TCG 02 TCG 3 TCG 3-4 TCG 4 TCG 07 TCGN 03 TCGP 01 TCGN 08 HGP 4010 HGN COM 4011 MCK 4012 SC 8 LAMELO MTS 4012 DA 4015 NF 6 MFM 7 Description Recommended Cutting Speed Rip saw balde Heavy duty rip saw blade Heavy duty rip saw blade Heavy duty rip saw blade Heavy duty rip saw blade Heavy duty rip saw blade Trimming & cross cut saw blade Trimming & cross cut saw blade Trimming & cross cut saw blade Trimming & cross cut saw blade Panel sizing saw blade Trimming & cross cut thin kerf Trimming & sizing saw blade Cross cut saw blade Trimming & sizing saw blade Trimming & sizing saw blade Trimming & sizing saw blade Panel sizing saw blade Trimming & cross cut thin kerf Trimming & sizing saw blade Trimming & sizing saw blade Plastic Trimming & sizing saw Trimming & sizing saw blade Trimming & sizing saw blade Combination cut saw blade Scoring saw blade Scoring saw blade Cutter for joining plate Grooving saw 4mm-13mm Grooving saw blade Non ferrous metal saw blade T.C.T Metal saw blade Page no

5 7 Recommended Cutting Speed

6 AT-1001 Rip Flat teeth. Wide radius gullet for easy chip removal. Along the grain of soft and hard wood. Soft fiber and stone fiber boards

7 Heavy Duty Rip AT Flat teeth. Wide radius gullet for easy chip removal. Along the grain of soft and hard wood. Soft fiber and stone fiber boards

8 AT Heavy Duty Rip Flat teeth. Wide radius gullet for easy chip removal. With carbide chip clearance rakes. Along the grain of soft and hard wood. Soft fiber and stone fiber boards (2+2) (2+2) 439 (2+2) 10

9 Heavy Duty Rip AT-1006 Flat teeth. Wide radius gullet for easy chip removal. Cooling slots in the saw body prevent excessive heat build up. Along the grain of soft and hard wood. Solid, soft and hard wood, with knots

10 AT Heavy Duty Rip Flat teeth. Wide radius gullet for easy chip removal. Cooling slots in the saw body prevent excessive heat build up. Along the grain of soft and hard wood. Soft fiber and stone fiber boards

11 Heavy Duty Rip AT Flat teeth. Wide radius gullet for easy chip removal. Along the grain of soft and hard wood. Soft fiber and stone fiber boards. With carbide chip clearance rakes (2+2) (2+2) 13

12 ATB-2001 Trimming & Cross cut Alternate top bevel teeth. Soft, hard and exotic wood- along and crosscut the grain. Veneers, plywood and boards veneered on both sides, hard boards, MDF, chipboard with plastic laminate on one side `

13 Trimming & Cross cut ATB-01 Alternate top bevel teeth. Soft, hard and exotic wood- along and crosscut the grain. Veneers, plywood and boards veneered on both sides, hard boards, MDF, chipboard with plastic laminate on one side. `

14 ATB-0 Trimming & Cross cut Alternate top bevel teeth. Soft, hard and exotic wood- along and crosscut the grain. Veneers, plywood and boards veneered on both sides, hard boards, MDF, chipboard with plastic laminate on one side. `

15 Trimming & Cross cut ATB-1 Alternate top bevel teeth. Soft, hard and exotic wood- along and crosscut the grain. Veneers, plywood and boards veneered on both sides, hard boards, MDF, chipboard with plastic laminate on one side. `

16 ATB-2006 Trimming & Cross cut Alternate top bevel teeth. Panel material with plastic lamination or not, hardboard, chipboard and plywood. ` (4/19/100+ 2/14/110) (2/14/100) 80 (4/19/120+ 2/9/1) (2/14/100) 18

17 Trimming & Cross cut ATB-2006 Alternate top bevel teeth. Panel material with plastic lamination or not, hardboard, chipboard and plywood. ` ) 4/9/100( /14/125( ) 2/10/80 75 ) 4/15/105( /19/120( ) 2/9/1 ) 2/11/115( + 2/11/115( ) 2/19/ /9/120( ) 2/11/

18 ATB-06 Trimming & Cross cut Thin Kerf Alternate top bevel teeth. Thin kerf. soft, hard and exotic wood- along and crosscut the grain. Veneers, plywood and boards veneered on both sides, hard boards, MDF, chipboard with plastic laminate on one side. `

19 Trimming & Sizing ATBN-00 Alternate top bevel teeth 2-32º. Negative hook. Specially designed for particle boards with plastic lamination on both sides. Extra fine cut. ` º º º º º º º º º

20 ATBN-1/1 Cross cut Alternate top bevel teeth 2-32º. Negative hook. Soft and hard wood, particle boards. Without grabbing! Using for overarm machines. ` º 684-2º º º º º º

21 Trimming & Sizing TCG-02 Triple chip grind teeth. Soft and hard wood, along and across the gain. Plywood, veneer, laminate panels, boards. Specially smooth finishing in boards laminate on both sides

22 TCG-3 Trimming & Sizing Triple chip grind teeth. Soft and hard wood, along and across the gain. Plywood, veneer, laminate panels, boards

23 Trimming & Sizing TGC-3-4 Triple chip grind teeth. Soft and hard wood, along and across the gain. Plywood, veneer, laminate panels, boards

24 TCG-4 Panel Sizing Triple chip grind teeth. Panel material with plastic lamination on both sides or not, chipboard, plywood and all other boards. Used for panel sizing and diving /19/100( ) 2/14/110 ) 2/14/100( /19/120( ) 2/9/1 ) 2/14/100( ) 4/9/100( 80 26

25 Panel Sizing TGC-4 Triple chip grind teeth. Panel material with plastic lamination on both sides or not, chipboard, plywood and all other boards. Used for panel sizing and diving /14/125( ) 2/10/80 75 ) 4/15/105( /19/120( ) 2/9/1 ) 2/11/115( + 2/11/115( ) 2/19/ /9/120( ) 2/11/

26 TCG-07 Trimming & Cross cut Thin Kerf Triple chip grind teeth. Thin kerf. soft, hard and exotic wood- along and crosscut the grain. Plywood, hard boards and boards with plastic or veneer laminations on both side along and across

27 Trimming & Cross cut Thin Kerf TGCN-03 Triple chip grind teeth. Negative hook. Soft and hard wood, particle boards laminate on both sides. Without grabbing! Using for overarm machines º º º º

28 TCGP-01 Trimming & Cross cut Thin Kerf Alternate top bevel teeth. 4 edge brake grind teeth. Soft and hard wood. Particle boards laminate on both sides. For extra fine cut

29 Plastic Trimming & Sizing TCGN-08 Triple chip grind teeth. Negative hook. Specially for plastic and profiles, without melting or chipping º º º

30 HGP-4010 Trimming & Sizing Hollow-ground and reversed V-ground teeth. For panel materials with veneer or plastic lamination on both sides or not. Used in saw benches where the scoring unit is NOT in used, or vertical panel sizing saws. Extra fine finish in laminates

31 Trimming & Sizing HGN-4010/1 Hollow-ground and reversed V-ground teeth. For panel materials with veneer or plastic lamination on both sides or not. Used in saw benches where the scoring unit is NOT in used, or vertical panel sizing saws. Extra fine finish in laminates º º º 33

32 COM-4011 Combination Cut Alternate top bevel teeth with Raker. 4 alternate with 1 Raker. An excellent all around saw, ideally suite where one saw is used for all different types of cutting. For ripping or crosscutting solid, board, plywood or laminate. Fine finish for all kind of wood

33 Scoring MCK-4012 Alternate top bevel teeth. Conical teeth. Kerf- Adjustable to the main circular saw blade. Depend on the main circular saw blade. Scoring with the feed / / / / / / / /

34 MCK-4012 Scoring Alternate top bevel teeth. Conical teeth. Kerf- Adjustable to the main circular saw blade. Depend on the main circular saw blade. Scoring with the feed ) 3/11/70( 55 ) 5/3/66( ) 2/9/110( 65 ) 2/9/110( 50 ) 3/15/80(

35 Scoring SC-8 Saw left- Left top bevel teeth. Saw right- Right top bevel teeth. Kerf- Adjustable to the main circular saw blade by means of shims. Depend on the main circular saw blade. Scoring with the feed / / /

36 LAMELO Cutter for Joining Plate Flat teeth. The width of the cutter is suited to the original lamello joint plates. The size of the lamello joint plates determine the depth of the penetration. Soft and hard wood. Cutter for joining lamello or or 22 12º

37 Grooring Saw mm-1mm MTS-4014 CUSTOM Can be supplied with all king of grinding. Kerf- mm up to 1mm. Can be supplied with wide radius gullet for easy ship removal. For working along and across the grain. 39

DA-4015 Grooring Saw-1. 4 Left top bevel teeth, 1 flat teeth. 2. 4 Right top bevel teeth, 1 flat teeth.

Recommended for plywood, melamine or where extra smooth cut is needed.

38 DA-4015 Grooring Saw-1. 4 Left top bevel teeth, 1 flat teeth Right top bevel teeth, 1 flat teeth. Chipper Blades- Flat teeth. Can be used to cut either with or against grain. Recommended for plywood, melamine or where extra smooth cut is needed. 820 " /8 1/4"to 13-16" 821 " 8 5/8 0º 1/4"to 13-16" 822 " 8 1 0º 1/4"to 13-16" 823 " /8-1/4"to 13-16" 8 " /4"to 13-16" 825 " 10 5/8 1/4"to 13-16" 826 " /4"to 13-16" 827 " /4"to 13-16" 40

39 Non Ferrous Metal NF-6 Triple chip grind teeth. Negative hook. For thin-walled profiles of aluminum. Suitable for sizing and miter cuts in ferrous metals such as aluminum and aluminum alloys /32 /32 /32 /32 /32 32/40 /32/40 40/50 40/50 40/50 40/

40 MFM-7 T.C.T Metal Saw Special alternate bevel grind teeth. Using in dry cutting For steel pipes, profiles, bars aluminum profiles and PVC pipes. Fast cutting. No sparks! Clean surface (without burning) º " 8 / 5 0º " 8 / 5 0º " 8 / 5 0º " 1 0º " 1 0º " 1 0º " 1 0º 42

Optimus. The New Generation of Saw Blades. 4X Cutting Power Catalog US

Optimus. The New Generation of Saw Blades. 4X Cutting Power Catalog US Optimus The New Generation of 4X Cutting Power Catalog US OUR COMPANY ISHAD manufactures high quality saw blades for exportation world-wide. Each product complies with the strictest quality control standards