Saw Blades INDEX Saw Blades

Transcription

1 INDEX Offering a comprehensive range of quality saw blades for all industrial applications has established Dir as a global leader in this field. Our saw blades feature the following important characteristics: Advanced grades of carbide best suited to cutting requirements Manufacture by fully autoted, high-precision grinding chines Unique technology to ensure superior straightening, balancing and tension Special micron coating applied by electrostatic processing Selected saw blades are offered using Polycrystalline Diamond (PCD) tool technology, for ultra-hard-wearing, long-life cutting quality and reliability. Dir saw blades deliver optimum perfornce, superior cutting and proven prolonged tool life. Technical Infortion - 2 Bushings 3 Diamond (PCD) tool for Track Saw - Gxx Quick Selection Guide

2 Technical Infortion Technical Infortion Dir is proud to introduce a complete range of carbide tipped sawblades nufactured to the highest possible Advanced Carbide: Dir utilizes only the highest quality virgin carbide produced in Europe. Grades are of either Micro-grain, Sub-Micron or Nano-grain sizes, to provide the ultite longevity of the cutting edge, standards of precision. Our blades are utilized in the most significantly increasing life cycle. Specific grades are perfectly tched to the cutting requirements for each dending applications for woodworking, plastic and application. nonferrous terials. The blades are produced in a highlyautoted, state-of-the-art facility. Engineered with oversized, sub-micron carbide tips, our blades provide extended life and optil perfornce required by the most dending industrial user. Products are sold worldwide under the Dir brand as well as to leading OEM companies. Building on our cumulative experience since has allowed us to develop a supply chain that meets the needs of local rkets as well as the dends of large global organizations. Our reputation is based on nufacturing high quality industrial products, delivering real solutions to the rket and offering outstanding customer service. Starting Point Regular Saw 00% Cutting Lenght 200% Precision Surface Grinding: All saw bodies are rotary surface ground to exacting tolerances for thickness and flatness. Carbide Brazing: Our brazing process is fully autoted with temperature controlled chinery using a trimetal (silver-copper-silver) shim for added shock resistance. The autoted process allows the carbide to be heated and cooled without changing the metallurgical properties thus enhancing the perfornce of the Dir nufactures a comprehensive line of sawblades suitable for chines within a wide range of industrial applications. Our production processes utilize the most advanced technology available. Raw terials are of the highest possible grades, procured from recognized global suppliers. IMPORTANT FEATURES OF THE DIMAR SAW BLADE RANGE: saw blades. Sharpening: Our state-of-the-art grinding chinery is fully autoted with robotic terial handling for the highest possible accuracy in a cost-effective environment. We utilize customized diamond grinding wheels to intain strict tolerances and a superior surface finish which guarantees the cutting quality. : Dir utilizes a unique proprietary process to achieve the ultite in saw body tensioning. Our Highest Quality Steel: Premium steel supplied by leading European producers with superior alloys specifically optimized for use as saw bodies. Laser Cutting: All Dir sawblades are exclusively cut by laser for the highest possible precision on critical dimensions. blades receive individual inspection for tension, flatness and run-out resulting in a blade that performs perfectly out of the box, every time. Balancing: In addition to our unique tensioning process, each blade produced by Dir is balanced to further eliminate vibrations that can affect perfornce and cause preture wear. Tooth Configurations: A variety of tooth geometry is offered for perfornce optimization in each application. Expansion Slots: Optil design of expansion slots are laser cut to reduce distortion resulting from heat and centrifugal forces. Our expansion slots are specifically designed to control noise caused by air turbulence during high speed rotation of the blade. Coatings: Dir has developed an exclusive electrostatic coating process, DCOAT, that provides a thin yet strong layer of protection with a uniform thickness, over the entire saw body and teeth. This special coating process guards against rust and resin while also offering heat resistance. Reduced friction during operation Arbor Holes: The central bore has a tight tolerance following DIN norm for H7 precision. Surface finish is controlled by a unique chining process resulting in an exceptional fit for high concentricity when mounted on the saw arbor. The chamfered edge provides smooth installation without daging the saw body. results in longer cutting runs under reduced power consumption. The DCOAT process is environmentally friendly and free from harmful chemicals. *Upon customer request, Dir can also provide distinctive surface coatings in a range of colors. Laser Engraving: This is the final step in the process, following Quality Control. Copper Plugs: Many of our standard blades have copper plugs used to fill the expansion slot base hole, All pertinent infortion and part identification is clearly and pernently rked on the saw body by laser engraving. to further reduce vibration and noise. Features that ke a superior product: Outstanding cut quality and surface finish Extended blade life over repeated sharpening Minimum vibration and noise characteristics Exceptional price-to-perfornce ratio

3 The Ultite Saw blade Technical Infortion Material Technical Infortion Cutting Direction Cutting speed in(m/sec Under the DMAX brand, we have developed a superior family of products for ximum longevity when cutting n-de terials such as Plywood, Melamine and MDF. Unique properties of the DMAX saw blade include: Ultrafine-grain Carbide: With significantly higher hardness Ultrafine-grain carbide provides the highest possible tool life and wear resistance, especially for laminated terials. The surface of each tooth is precision ground to the highest finishing standards to ensure a sharp cutting edge. Precision Saw Body: o High precision body balanced to G6.3, to minimize vibration and provide a smooth cut. o Exclusive straightening process developed by Dir engineers o Fully autoted production results in a perfect blade every time o Blades are further tension adjusted for sawing n-de terials and exotic woods. Carbides & Grinding: Using micro grain carbides for superior wear resistance, we achieve the highest level of saw tooth surface quality, to ensure ximum sharpness of the cutting edge. Long Life Blades DMAX+ long life saw blades are used for cutting MDF, HDF (coated/uncoated) as well as high quality clean chipboard. Teeth are produced from special ultrafine-grain quality carbide for extreme durability against erosion working with these terials. DMAX+ is intended for use with table saws and panel sizing chines. ening is intained long term as a result of a unique straightening method which does not alter the structure of the saw body. Static balancing increases stability to best preserve chine bearings. Natural wood Boards Plastic Soft Wood Hard Wood Veneers along across along across along across Plywoods 50-0 MDF -00 Particle Board With PVC Coating -0 Particle Board with Melamine Coating 6-0 Particle Board with Veneer Coating 62-0 High Pressure Laminated Particle Board 63-0 Soft Fiber Board Cemented Bonded Board 50-0 Hard Paper / Hard Fiber Duroplastic Board, Corian 5-50 High Pressure Laminated Bakelite -70 Thermoplastic Profiles 50-0 Aluminum Aluminum Profiles -70 Blades DMAX panel sizing blades yield optimum perfornce, utilizing advanced geometries to achieve exceptionally clean cuts and extended blade life. Features include: Nano-size carbide grades for ximum cutting cycle Crisp, sharp cutting edges for precision grinding Heavier gauge body for high stability in the cut 0.5 mm carbide tips for prolonged life and more service cycles Determining Saw Blade Diameter or R.P.M n (rpm) = 000. V π D V= Speed M sec D=Diameter mm n = Spindle R.P.M. Scoring Blades DMAX scoring blades, used in various applications are available in three types: grinding, long lasting carbide and kerf, adjusted by precision spacers. grinding, long lasting carbide and kerf, adjusted by projection above the table. D-Leader Type: A unique patented scoring saw blade for quick adjustments using a scale from 2.mm to 3.6mm. Adjustments can be de while the blade reins mounted on the chine. D-Leader is available in or diameters, with either a or 25mm bore Example : Determining the saw diameter to cut melamine coated chipboard with a 4500 R.P.M. diameter saw blade with 70 m/s cutting speed. You should use a 0mm diameter saw blade Example 2: Determining the r.p.m. to the chinery in order to cut at a speed of 00m/sec with a 350m saw. you should work with 5,500 R.P.M. grinding grinding PATENTED n (R.P.M.) 0

4 Determining Number of Teeth / Finding Feed Rate Technical Infortion Bushings for, & Tool No. O.D. I.D. Thickness W.070" (.mm) W2.06" (2.7mm) W3." (5.mm) W4 mm.070" (.mm) W5 mm 3/4".070" (.mm) 2550 mm 3/4 /4 W6 mm.070" (.mm) W7 3/4".070" (.mm) W 7/".0" (.5mm) W 7/" 3/4".0" (.5mm) W0 3/4".070" (.mm) W0A.070" (.mm) W.070" (.mm) W2.070" (.mm) W3 3/4".070" (.mm) W 25mm.070" (.mm) W5.070" (.mm) Tool no. O.D. I.D. Thickness W /4".00" (2.0mm) W /4" 3/4".00" (2.0mm) W /4".00" (2.0mm) W mm.070" (.mm) W20 mm.070" (.mm) Thickness I.D. O.D. Saw Blade Flanges Saw Blade Diameter mm mm 0mm 00mm 50mm 0 = <0 50/ 0/ 0/ = <0 0/ 0/ 0/ 20/0 / = <0 20/0 20/0 20/0 20/0 /0 / 200/ 0 = <450 20/0 20/0 20/0 /0 /0 / 200/ 450 = <550 /0 /0 /0 /0 /0 / 200/ 550 = <6 / / / / / / 200/ 6 = <00 200/ 200/ 200/ 200/ 200/ 200/ 200/ PCD - TCG (Metric) Properties: High efficiency cutting saw blade. Diamond height H=4.0mm. For stationary, portable and CNC chines. Application: Suitable for homogeneous, abrasive terials such as Trespa, Max, Corian, plastics, MDF, chipboard, etc. 2 The size of the flange is determined by the saw blade diameter and bore diameter Recommended Feed Rates Sz (mm/tooth) Meterial Solid wood Chipboard and plywood Boards with plastic lamination Boards veneered on both sides Hardboard Duroplastic boards Thermoplastic boards Tool no. Teeth H Form mm. (3.2mm) 4mm TCG mm. (3.2mm) 4mm TCG 5.. 0mm. (3.2mm) 4mm TCG mm. (3.2mm) 4mm TCG mm 4.3 (3.5mm) 4mm TCG mm 0.3 (3.5mm) 4mm TCG 2 3

5 PCD - for Portable (Metric) Properties: High efficiency saw blade. Diamond height H=4.0mm. For portable chines. Application: Suitable for homogeneous, abrasive terials such as Trespa, Max, Corian, plastics, MDF, chipboard, etc. Carbide Tipped Rip for Wet/Dry Wood.0 B 2 C ød 20 Tool no. Teeth H Form (2.4mm) 4 20 Flat (2.4mm) 4 20 Flat (2.4mm) 4 20 Flat (2.4mm) 4 Flat (2.4mm) 4 20 Flat (2.4mm) 4 Flat (2.4mm) 4 Flat (2.4mm) 4 Flat (2.4mm) 4 Flat With rakers to prevent the wood from king contact with the saw body. Used in circular saw benches and multi ripsaw chines. Special Carbide that repels moisture and water and allows a longer cutting life. Tool no. Teeth 2-20 CLM (3.2mm) +2P.H - CLM (3.5mm) +2P.H Carbide Tipped RIP with Chip Limitation PCD - Scoring Properties: Scoring saw blade. Diamond height H=4.0mm. For stationary sawing chines with scoring unit. Application: Suitable for homogeneous, abrasive coatings such as HPL, CPL, etc. For ripping natural wood. Safety feature prevents kickback. Easy feed and faster cut. Added Cooling Holes for faster heat dispensing. Tool no. Teeth Tool no. Teeth H Form Flat Flat ,/4, ,/4, ,/3, ATB ,/3,6 4 ATB ,4/5, ,4-5, ,-5, ,4/5, ,4/5, ,/5, ,/6, CL." (3.2mm) 2- CL." (3.2mm) -2 CL 2.3" (3.5mm) -2 CL 2.3" (3.5mm) Carbide Tipped Multi RIP B 2 C ød 20 Tool no. Teeth Keyway 0- RIPM +2." (3.2mm) 70mm 4/20x RIPM " (3.2mm) 70mm 2/20x7 - RIPM " (3.5mm) 70mm 2/20x Designed to cut wet and dry wood. With rakers to prevent the wood from king contact with the saw body. Used in circular saw benches and multi ripsaw chines. Special Carbide that repels moisture and water and allows a longer cutting life. 5

6 Carbide Tipped RIP Carbide Tipped Melamine Blades - Negative Hook B 5 ød C Tool no. Teeth - RIP "." (3.0mm) - RIP "." (3.0mm) - RIP "." (3.0mm) 0- RIP." (3.2mm) 0- RIPX-A.04" (2.4mm) 2- RIPX." (3.2mm) 2- RIPX." (3.2mm) 2- RIP." (3.2mm) 20 Designed to cut hard & soft wood. Has a flat tooth pattern with 20º hook (face) angle. Performs high speed ripping leaving a rough edge. Used in circular saw benches and multi ripsaw chines. 2- RIP-0 2. (3.2mm) 0mm+2 KEYWAY -2 RIPX 2.3" (3.5mm) - RIP.3" (3.5mm) Tool no. Teeth 2- RIP.57" (4.0mm) -2 RIP 2.57" (4.0mm) - RIPX.3" (3.5mm) - RIP.57" (4.0mm) -4 RIP 4.3" (3.5mm) Tool no. Teeth -4 TN " 4." (3.0mm) 0-0 TN 0.34" (3.4mm) 0-0 TNX 0." (3.2mm) 2- TN.34" (3.4mm) -0 TN 0.34" (3.4mm) -20 TN 20.57" (4.0mm) Carbide Tipped Combination (COM) Precision quality saw blades specially suitable for Miter Saw and table saws. Dynamic ness Carbide Tipped Glue Line (TCG) A special Triple Chip Grind will produce smooth and uniform surface for gluing and finish work in solid woods. Tool no. Teeth 0- TCG." (3.2mm) 2- TCG." (3.2mm) - TCG.0"(4.3mm) - TCG.0"(4.3mm) Tool no. Teeth - COM "." (3.2mm) - COM "." (3.2mm) 0-50 COM (3.4mm) *0-50 CL 50." (3.2mm) 2- COM." (3.mm) -70 COM 70." (3.mm) -0 COM 0.57" (4.0mm) * Chip Limitation for Radial Arm Saw All purpose blade designed for ripping, cutting along and across the grain for easy feed in softwood, hardwood, plywood, chipboard and particle board. The fifth raker tooth is designed to give a clean medium quality cut. For radial arm and table saws.

7 Carbide Tipped Thin (ATB) Carbide Tipped Dado sets for Wood and Melamine Tool no. Teeth -34 THIN-A " 34.00" (2.3mm) - THIN-A ".04" (2.4mm) 0- THIN-A.00" (2.3mm) 0-0 THIN-A 0.04" (2.4mm) 2-4 THIN-A 4.00" (2.3mm) 2- THIN-A.04" (2.4mm) -54 THIN-A 54.00" (2.3mm) -0 THIN-A 0.00" (2.3mm) Carbide Tipped Extra Thin (ATB) Tool no. Teeth -0 THIN " 0.06" (2.2mm) 0-00 THIN 00.06" (2.2mm) DIMAR Premium quality THIN saw blades are the perfect choice for cutting Technoform Glass Insulation (TGITM) terials such as Plastic Hybrid Stainless Steel (HPSS) insulating glass spacers. Carbide Tipped Thin Series (TCG) Thin kerf saw designed for finish work on expensive wood where stock loss must be kept to a minimum. Recommended for use with large flange and stock thickness of a ximum of 3/4. Extra thin kerf saw designed for finish work on expensive wood where stock loss must be kept to a minimum. Recommended for use with large flange and stock thickness of a ximum of 3/4. Dado Sets DIMAR s dado sets are produced to conform to the strict tolerances of the Gern codes and are equal to those of the highest quality anywhere in the world. The Blank: Made from hot-rolled chrome-alloy tool steel, it is tensioned and straightened to give you the best results that only a heavy duty dado can give. Saw body hubs are CNC chine ground and are an integral part of the blank. This will give you stability and better perfornce during dending jobs. Laser cut bodies (not stamped) ensure accurate and balanced dado for reduced possible vibration. The Carbide Teeth: The highest grade of carbide is used to give you the longest possible life between sharpening, and yet endure the toughest jobs without failing. The teeth are longer to give you better chip removal results. The autotic tooth braising is tested by infrared detectors to ensure proper tooth bonding and strength of at least Kg/Sq mm to the dado blank. The Chippers: Five chippers are provided. Four /, one / thick. This configuration will give you less vibration and will save you money each time you sharpen your dado set. The Dado Case: Made from high quality Aluminum. The foam is moisture resistant. To Sum It Up: The DIMAR Dado will last longer, save you money, and take on the toughest of jobs. If your saw chine can stand the pressure, so will the DIMAR Dado. Tool no. Teeth -34 THIN-T " 34.00" (2.3mm) - THIN-T ".04" (2.4mm) 0- THIN-T.00" (2.3mm) 0-0 THIN-T 0.00" (2.3mm) 2-4 THIN-T 4.00" (2.3mm) 2- THIN-T.04" (2.4mm) -0 THIN-T 0.00" (2.3mm) Thin kerf saw for finish work on expensive wood where stock loss must be kept to a minimum. Recommended for use with large flange and stock thickness of a ximum of 3/4. Dynamic ness Dado Shims Set of Dado Shims. Made from durable plastic, these shims are color coded for different thickness. Outside diameter: 3 Inside diameter: 5/ Tool no. Set Includes S 4 shims.05mm Silver 2 shims.0mm Yellow 4 shims. Clear 4 shims.mm White Tool no. Set Includes S- 4 shims.004 Gold 2 shims.006" Yellow 4 shims.00 Clear 4 shims.020" White

8 Dado sets for Wood and Melamine Dado Set with Chip Limiters, 6, For Wood This Premium Quality Dado was designed with USER SAFETY in mind. It will PREVENT KICKBACK, and will give a better operation control by eliminating Climbing. Sll chip removal will result in FINER FINISH, and reduction in motor overloading. LARGE SIZE CARBIDE Teeth will prolong tool life. A versatile tool which will cut various size grooves from /4 to 3/ ximum width. Each complete set includes: Saw Blade R, Saw Blade L, Dado Chipper /, 4 Dado Chipper /, Set of Dado Shims. /4" - 3/ 6- DADO - Chip Limiter. 5º Positive Hook Angle Tool no. Description Teeth 6- DADO CL Complete Set 6" /4"-3/ 6-/C Dado Chipper 6" 2 / 6-/C Dado Chipper 6" 2 /" 6-RC Saw Blade R 6" /" 6-LC Saw Blade L 6" /" - DADO - Chip Limiter. 5º Positive Hook Angle Tool no. Description Teeth - DADO CL Complete Set " /4"-3/ -/C Dado Chipper " 2 / -/C Dado Chipper " 2 /" -RC Saw Blade R " /" -LC Saw Blade L " /" Instructions included with every set and y be downloaded from our web site: / /" /" /" /" Dado sets for Wood and Melamine Dado Set, Negative Hook,, 0 For Melamine This customized dado set offer a CHIP FREE operation on one and two sided coated terials. It has twice as ny Cutting Teeth, resulting in a SUPERB FINISH. -46 Dado, -5º Negative Hook Angle Tool no. Description Teeth -46 DADO TN Complete Set " 46 /4"-3/ -/ Dado Chipper " 2 / -/ Dado Chipper " 2 /" -46R Saw Blade R " 46 /" -46L Saw Blade L " 46 /" -46 DADO TN- Complete Set " 46 /4"-3/ Tool no. Description Teeth 0-5 DADO TN Complete Set 5 /4"-3/ 0-5 DADO TN Complete Set 5 /4"-3/ 0-/ Dado Chipper 2 / 0-/ Dado Chipper 2 /" 0-5R Saw Blade R 5 /" 0-5L Saw Blade L 5 /" Dado Set, 0, 2 - For Wood 5º Positive Hook Angle /4" - 3/ / /" /" /" /" Dado Set with Chip Limiters, 6, For Wood A versatile tool which will cut various size grooves from /4 to 3/ ximum width. For all types of wood and coated terials. Instructions included with every set and y be downloaded from our web site: /4" - 3/ Tool no. Description Teeth 0- DADO Complete Set /4"-3/ 0-/ Dado Chipper 2 / 0-/ Dado Chipper 2 /" 0-R Saw Blade R /" 0-L Saw Blade L /" / /" - Dado, -5º Negative Hook Angle Tool no. Description Teeth - DADO Complete Set " /4"-3/ -/ Dado Chipper " 2 / -/ Dado Chipper " 2 /" -R Saw Blade R " /" -L Saw Blade L " /" - DADO- Complete Set " /4"-3/ Tool no. Description Teeth 0- DADO- Complete Set /4"-3/ 0-/- Dado Chipper 2 / 0-/- Dado Chipper 2 /" 0-R- Saw Blade R /" 0-L- Saw Blade L /" Tool no. Description Teeth 2- DADO Complete Set /4"-3/ 2-/ Dado Chipper 2 / 2-/ Dado Chipper 2 /" 2-R Saw Blade R /" 2-L Saw Blade L /" 20 /" /" /" 2

9 Carbide Tipped Hollow Ground Finishing Blades, Carbide Tipped Triple Chip (TCG) For Wood & Laminate R= 0mm Tool no. 7 /4- HG - HG - HG 0-4 HG 2- HG - HG Teeth 7 /4 " 2 4." (3.2mm)." (3.2mm)." (3.2mm). (3.2mm). (3.2mm). (3.2mm) Tool No. Dynamic Dynamic ness Carbide Tipped Special Purpose Saw Blade Tool no. Teeth Style For Hollow, Ground, Holz-Her Negative 0- HGN 2." (3.3mm) *0- TCG 2." (3.0mm) +2 PH TCG, Holz-Her Positive HGN 253mm 4." (3.3mm) Hollow, Ground, Negative 4- HGN 4mm." (3.3mm) Hollow, Ground, Negative Trimming and sizing of laminated boards on two sides. No grabbing design. Superb finish. Can be supplied with 5/ and bore (with bushings). * Not as per line art above. Carbide Tipped Melamine Chip free cutting & trimming double-sided laminated boards 25º ATB, 6º Negative Hook Tool no. Teeth 0-0 TNDX 0-0 TNTD 2- TNTD 2- TNTD- 0 0." (3.2mm).34" (3.4mm).34" (3.4mm).34" (3.4mm) +2P.H Dynamic ness Teeth 7 /4" " " 2 " " " (3.0mm)." (3.0mm)." (3.0mm)." (3.0mm)." (3.0mm)." (3.0mm)." (3.2mm)." (3.2mm)." (3.2mm)." (3.2mm)." (3.2mm)." (3.2mm)." (3.2mm)." (3.2mm)." (3.2mm)." (3.2mm).55" (4.0mm).3" (3.5mm).55" (4.0mm).3" (3.5mm).3" (3.5mm).3" (3.5mm).55" (4.0mm).3" (3.5mm).55" (4.0mm).3" (3.5mm).57" (4.0mm).3" (3.5mm) +2 PH +2 PH +2 PH +2 PH Finishing Blades, Carbide Tipped Saw Blade (TCG) 7 /4- TCG -4 TCG - TCG 0- TCG - TCG - TCG 0- TCG 0- TCG 0-0 TCG 0-0 TCG- 2- TCG 2- TCG 2- TCG- * 2-0 TCG 2- TCG 2- TCG- * - TCG - TCGX -4 TCG -4 TCGX -0 TCGX -0 TCGX- * -2 TCG - TCGX -0 TCG - TCGX - TCG -20 TCGX Tool no. Teeth 00TD 2TD * 2TD TD- * 4TD 0TD " (3.2mm)." (3.2mm)." (3.2mm).3" (3.5mm).3" (3.5mm).3" (3.5mm) +2 PH +2 PH For cutting against the grain slow cutting feed. Designed for single sided laminate veneer. Has 0º hook (face) angle for exceptional cutting quality. +2 PH Trimming and sizing in panel terials with or without lamination. Superior finished cut on Melamines, veneers, vinyls. Dynamic *Altendorf/ ness Felder The Ultite Sawing Blades Special dynamic balancing Unique straightening operation Long-lasting quality cut Low noise level +2 PH Dynamic Dynamic ness *Altendorf/ Felder +2 PH *Altendorf/ Felder

10 Carbide Tipped Cut Off (ATB) Alternate Top Bevel Tool No. 4- ATB- 7 /4-7 / ATB -4 ATB - ATB /4- /4- - ATB - ATB 0- ATB 0- ATB 0-0 ATB 2-4 ATB 2- ATB 2- ATB 2-0 ATB 2- ATB 2- ATB- -54 ATB -54 ATB- - ATB - ATB- -4 ATB -0 ATB -0 ATB- - ATB -0 ATB - ATB -20 ATB -66 ATB -0 ATB Teeth 00mm 7 /4" 7 /4" " " " /4" /4" " " " " "(2.6mm) +2 PH +2 PH +2 PH +2PH." (3.0mm)." (3.0mm)." (3.0mm)." (3.0mm)." (3.0mm)." (3.0mm)." (3.0mm)." (3.0mm)." (3.0mm)." (3.2mm)." (3.2mm)." (3.2mm)." (3.2mm)." (3.2mm)." (3.2mm)." (3.2mm)." (3.2mm)."(3.2mm).3" (3.5mm).3" (3.5mm).3" (3.5mm).3" (3.5mm).3" (3.5mm).3" (3.5mm).3" (3.5mm).3"(3.5mm).57" (4.0mm).3" (3.5mm).3" (3.5mm).57" (4.0mm).57" (4.0mm) Trimming and Cross Cut for Hard & Exotic Wood Saw Blade Tool no. Diamond Knockout For general crosscutting along the grain and trimming of wood, plywood, and sizing pressboard, hardboard, chipboard, & particle board. Teeth 2-00 ATB-R 3/4" 00." (3.0mm) 2-20 ATB-R 3/4 20." (3.0mm) Carbide Tipped Plastic Trimming & Sizing This blade is furnished with 0º-5º hook (face) angle for fast feed giving a reasonable finish. For table saws, overhead saws & radial arm saws. Trimming and sizing plastic sheets in stacks, thermoplastic boards and profiles. Triple chip tooth grind with negative hook for no melting, and chip free cutting. Tool no. Teeth 0-0 PL 2- PL -0 PL 0 0.0" (2.5mm)." (3.3mm).5" (3.7mm) Dynamic ness Carbide Tipped Solid Surface - Laminate Trimming and sizing of solid surface terial, laminated boards on two sides. No grabbing design. Most suitable for radial overarm saws. Tool no. Teeth 0- COR 2-4 COR - COR -0 COR 4 0." (3.2mm)." (3.2mm)." (3.2mm)." (3.3mm) Dynamic ness 25

11 3.3 Carbide Tipped Scoring Tool No. Teeth Grind Body Pinhole Name 54T TCG Panhans, Hoggers, Mayer 5T44 5 TCG Panhans, Hoggers, Mayer 5T TCG T TCG Gibben 355T TCG Panhans, SCM, Mayer 355T TCG Gibben 355T4P 355 TCG /2 PH Gabbiani, S.M.A. T44 TCG PH Holz TCGP TCG PH Beam TCG0 TCG PH SCM + Gabbiani 30T TCG PH 0A44 0 ATB T44 0 TCG Schelling, Mayer 0T TCG Gibben 0T4P 0 TCG /2 PH Gabbiani 0T5 0 TCG Scher 0T44 0 TCG Scher, Schelling 0T44 0 TCG Holz, Anthon 0T TCG Gibben 0T4475P 0 TCG PH Gibben 0A4P 0 ATB PH 0T4P 0 TCG PH Gabbiani 0T4P2 0 TCG PH Selco, S.M.A. 0T44 0 TCG Holz 0T4 0 TCG Holz 4T44 4 TCG Panhans, Hoggers, Mayer 4T4P 4 TCG PH Selco, S.M.A. 4T4450P 4 TCG PH Gibben 4T4475P 4 TCG PH Gibben 450T TCG Panhans 450T TCG Holz 450T TCG Gibben 450A4P 450 ATB PH 450T4P 450 TCG PH Selco, S.M.A. 450T4P 450 TCG PH Selco 450TP 450 TCG PH Selco 450T4P 450 TCG PH Holz 470T4475P 470 TCG PH Gibben 500T4 500 TCG Holz 500T TCG Gibben 500T4 500 TCG Holz, Anthon 500T TCG Gibben 500TP 500 TCG PH Teutotic 500T TCG Holz 500T TCG Gibben 550T TCG Gibben TCG Blades ATB Blades ATB Blades TCG Blades Carbide Tipped, Adjustable Scoring, A well adjusted solution Tool No. Teeth 00-ADJ-SCOR 00mm 2.mm - 3.6mm 3/4" 00-ADJ-20SCOR 00mm 2.mm - 3.6mm * 00-ADJ-SCOR 00mm 2.mm - 3.6mm mm 20-ADJ-SCOR 2.mm - 3.6mm 3/4" 20-ADJ-20SCOR 2.mm - 3.6mm * 20-ADJ-SCOR 2.mm - 3.6mm mm 25-ADJ-SCOR 2.mm - 3.6mm 3/4" 25-ADJ-20SCOR 2.mm - 3.6mm * 25-ADJ-SCOR 2.mm - 3.6mm mm * Set includes special 5mm ring for Altendorf chines Replacement Tool No. Teeth 00ADJ 00mm 20ADJ 25ADJ Replacement Parts: 50 Spring Ring for 00 dia Spring Ring for 20/25 dia. 35 Washer 35 Washer Spring-Pin-ADJ 2550 Bushing mm OD x 3/4 ID 35 Allen Screw (A) For dial 4 Allen Screw (B) For body 4020 Allen Key (A) 00 Allen Key (B) Carbide Tipped - Split Type Tool No. Teeth SCOR 0mm mm 00-2-SCOR 00mm mm 3/4" SCOR 00mm mm 00-2-SCOR 00mm mm mm SCOR 00mm mm 20-2-SCOR mm 3/4" SCOR mm 20-2-SCOR mm mm SCOR mm 50mm + 4 P.H SCOR mm Dir takes the guesswork out of adjusting and readjusting scoring saw blades. The NOVA system s patented adjustable scoring eliminates the need for spacers, endless measuring, reassembling, testing and adjusting to obtain the required width. - Adjusts easily - Fits most chines - Fits all blades in the width of Saves you time and money Split type saw. Complete set includes: two blades interlocking with spring-pins, a set of spacers for adjusting saw kerf for optimum cut. Extra set of spacers to fit all split type scoring saws. Note: each split type scoring saw comes with one SPACE-PAK. Tool No. Teeth SPACE-PAK mm -mm bore SPACE-PAK- - bore Spring-Pin For all split scoring saw blades. SPACE-PAK0 mm 0mm scoring saws mm scale

12 .0mm Carbide Tipped - Conic Type Different sizes achieved by depth of penetration of saw into the wood. The deeper the cut the wider the kerf. Scoring Combination Carbide Tipped for Miter Saw Tool No. Teeth 00-20A SCOR 00mm mm 20-A SCOR mm 20-B SCOR mm 20-C SCOR 25-A SCOR mm 25-B SCOR mm 25-C SCOR 50-A SCOR 50mm mm 50-B SCOR 50mm mm 50-C SCOR 50mm 50-A SCOR 50mm mm 50-B SCOR 50mm mm 50-C SCOR 50mm Carbide Tipped - Conic Type Precision quality saw blades specifically suitable for working on single or double cut-off miter chines and radial arm saws. Unique tooth configuration of 4 Teeth ATB and Raker together with Negative hook, kes these blades the right choice for a wide cutting applications. Tool no. Style Teeth 0-0 MTR MTR Neg. 0. (2.mm) 2-0 MTR MTR Neg. 0." (3.mm) 2-00 MTR MTR Neg. 00." (3.0mm) Among the most popular applications are cuts in: Soft and hardwoods Painted mouldings Gesso (a white paint mixture consisting of a binder mixed with chalk, gypsum, pigment, or any combination of these) High-gloss and pre-finished picture frames PVC substrates (PVC is a thermoplastic polymer Carbide Tipped Metal Cutting/Wood/PVC/Aluminum mm 25 2.mm 2.3mm Tool No. Teeth Body 20ATD mm 2.0mm 20CTD 3.2mm 25CTD 3.2mm mm mm mm mm 3.2mm 50CTD 50mm 3.2mm mm 3.2mm mm 3.2mm mm 3.2mm /4" mm 3.2mm CTD mm 4.-5.mm 3.6mm 445P mm 3.2mm -3 PH 455P mm 3.2mm 55mm-3 PH mm 2 3.2mm 545 5mm mm 3.2mm 040 0mm 3.2mm 044 0mm 3.2mm mm 3.2mm mm 4.-5.mm 3.5mm mm mm 3.5mm 55mm mm 3.2mm 50mm +3 PH mm 3.2mm mm 3.2mm mm 3.2mm P 200mm 3.2mm 65mm-2 PH mm 4.-5.mm 3.5mm mm mm 3.5mm mm 4.-5.mm 3.5mm 0mm 24450P 2mm 3.2mm 50mm-3 PH P 0mm 4 3.2mm 50mm-3 PH D Max - The new generation of special carbide tipped saw blades for melamine coated terials. After extensive research and development, Dir is proud to present the D Max, a saw blade selection that will boost your production turnout by 00%. The most important feature of the blade s tungsten carbide teeth is the measure of resistance to abrasion. A new tungsten carbide of greater hardness has been developed by means of advanced technology. Innovative laser technology has allowed us to achieve fine cut expansion slots which ensures low noise level & greater stability. Dir uses a sophisticated and innovative computerized system in order to assure you excellent quality of the saw blades. Tool no. Teeth - MET.06 (2.2mm) 5/ 0-4 MET (2.4mm) 5/ * 2- MET 2.04 (2.4mm) * 2-0 MET (2.4mm) * -0 MET 0.04 (2.4mm) Carbide Tipped for Miter Saw 2 Tool no. TIPS-MET Description premium carbide tips for metal cutting saw blades Tool no. Style Teeth 3-0 N/F- 3" (3) TCG Neg. 0." (3.2mm) mm 3-02 N/F- 3" (3) TCG Neg. 02." (3.2mm) mm 5-00 N/F- 5" () TCG Neg. 00. (2.mm) mm + 2PH 5-00 N/F 5" () TCG Neg. 00. (2.mm) MAX. RPM Multi purpose metal cutting saw blades.for cutting ferrous metals (up to 25 Hrc), Aluminum, wood and composite terial. Used with Cut Off chines at high RPM. Suitable for above metal cutting saw blades MAX. RPM Precision quality saw blades specially suitable for Miter Saw, compatible with known brand names. 2

13 Carbide Tipped for Non Ferrous Metal Carbide Tipped for Electrical Portable Hand and Miter For cutting aluminum sheets, tubing extrusions and other non ferrous metals such as copper, brass, lead and gnesium. For smooth cutting, use lots of lubricant and a clamping device. Tool no. Teeth Across & Along Tool No. Teeth 6 /4-4 N/F 6 /4" 4. (2.mm) 7 /4-4 N/F 7 /4" 4. (2.mm) 7 /4-5 N/F 7 /4" 5. (2.mm) -4 N/F " 4. (2.mm) - N/F ". (2.mm).5- N/F /2". (2.mm) - N/F ". (2.mm) 0- N/F." (3.2mm) 0-0 N/F 0." (3.2mm) 0-00 N/F 00." (3.2mm) 2- N/F." (3.2mm) 2- N/F." (3.2mm) * 2- N/F-." (3.2mm) mm + 4PH 2mm x CC 3-0 N/F- 3" 0." (3.2mm) mm 3-02 N/F 3" 02." (3.2mm) 3-02 N/F- 3" 02." (3.2mm) mm -4 N/F 4." (3.2mm) -0 N/F 0." (3.2mm) 5-00 N/F 5" 00. (2.mm) 5-00 N/F- 5" 00. (2.mm) mm + 2 PH - N/F." (3.mm) -20 N/F 20." (3.mm) -0 N/F " 0.57" (4.0mm) -20 N/F " 20.57" (4.0mm) N/F 20" (500mm) 20.3" (4.4mm) N/F- 20" (500mm) 20.57" (4.0mm) mm N/FTHIN 20" (500mm) 20.2" (3.6mm) * -20 N/F- " (550mm) 20.3" (4.4mm) * For Scotchn model: CPO 35 HPA NF Diamond Knockout Note: The terial must be clamped firmly to the table on both sides during cutting operation. The use of coolant is very important. * * B= C 25 /2xB /3xB + * For cutting solid terials, positive Hook 45 Dynamic Dynamic ness 45 7 /4-7 /4. (3.0mm) 7 /4-7 /4. (3.2mm) 5/ 7 /4- TCG 7 /4. (3.0mm) 5/ 7 /4-4 N/F 7 /4 4.0 (2.mm) 5/ -. (3.0mm) 5/ /4- /4. (3.0mm) 5/ /4- /4. (3.0mm) 5/ Carbide Tipped for Miter Saw Tool no. Style Teeth.5-4 ATB /2 ATB Neg (2.6mm) 5/ Carbide Tipped for Miter Saw Diamond Knockout Precision quality saw blades specially suitable for Miter Saw, compatible with known brand names. Dynamic Dynamic ness Carbide Tipped Grooving for Aluminum Tool no. Style Teeth 0- ATB 0 ATB 0º. (3.2mm) 5/ Precision quality saw blades specially suitable for Miter Saw, compatible with known brand names. Tool no. Teeth 4- N/F 00mm.54" (3.mm) 4- N/F 00mm.54" (3.mm) 4 /2- N/F 5mm.54" (3.mm) 7/" 4 /2- N/F 5mm.54" (3.mm) 7/" Used for milling, clean up and grooving of aluminum welds and cutting out welding tacks. Used inly in the boat building industry. Used with hand held grinder 3

14 Miter Track Joint Saw Gxx Saw Blade for Track Saw (Metric) A track saw is a plunge-cutting circular saw ted to an aluminum guide rail. For accurate and clean cuts on everything from veneer plywood for cabinets and built-ins to plywood and OSB for wall and floor sheathing. Track saws are also great for trimming doors and cutting off overhanging deck boards. Tool no. Teeth aº Body Thickness Pin Holes To Cut Material Grind 3333 mm mm -6º.6mm 2/6/ Melamine HATB mm 4 2.2mm 0º.6mm 2/6/ Plywood,Chipboard ATB 33 mm 2.2mm 0º.6mm 2/6/ Plastic,Croos cut Combination 333 mm 2.2mm 5º.6mm 2/6/ Rip Trapez 203 mm 2.2mm 5º.6mm 2/6/ Aluminum TCG 03 mm 2.2mm 5º.6mm 2/6/ Steel sheets ATB+chamfer Tool no. Teeth aº Body Thickness Pin Holes To Cut Material Grind mm 2.4mm -6º.mm 2/6/ Melamine HATB mm mm 0º.mm 2/6/ Plywood,Chipboard ATB 333 0mm mm 0º.mm 2/6/ Plastic,Croos cut Combination mm 2.4mm 5º.mm 2/6/ Rip Trapez mm mm 5º.mm 2/6/ Aluminum TCG 33 0mm 2.4mm 5º.mm 2/6/ Steel sheets ATB+chamfer Tool no. Teeth aº Body Thickness Pin Holes To Cut Material Grind mm mm -6º 2mm 2/7/ Melamine HATB mm 2.6mm 0º 2mm 2/7/ Plywood,Chipboard ATB mm mm 0º 2mm 2/7/ Plastic,Croos cut Combination 36 20mm mm 5º 2mm 2/7/ Rip Trapez mm mm 5º 2mm 2/7/ Aluminum TCG 6 20mm mm 5º 2mm 2/7/ Steel sheets ATB+chamfer Dir s new Gxx Professional carbide Tipped provide top-notch affordable quality for the sll shop and the home woodworking enthusiast, and feature our new D-Coat Nano-technology system! Using specialized Nano Technology developed exclusively by Dir, the coating is absorbed into the body of the saw blade body plate and teeth, ensuring that the coating will not peel off or crack (under norl usage). Dir s technique embeds the coating in the body of the saw blade terial and teeth - compare this to the standard technique used by all other saw blade nufacturers of simply painting the teeth or spraying on Teflon which can come off easily. These blades will give you the cut you need at the price you want! The Gxx Professional blades have thicker deflection limiting plates then our Woodpecker line, providing smoother cuts than comparable thin-kerf blades. Dir s Gxx blades are available in Alternate Top Bevel grind (for cutting hardwood, softwood and plywood), Triple- Chip Grind (for chipboard and laminate-covered terial) and flat top grind (for ripping). Features and Benefits: D-Coat Nano-technology system! Micro-grain Gern de tungsten carbide teeth for optimum durability and prolonged tool life. Long and thick carbide teeth that tolerate over 5 sharpenings. Premium quality stiff plate for true cutting even under load. Premium quality: Made in Gerny. 33

15 Gxx Gxx Carbide Tipped Rip For ripping and cutting in solid soft-and hardwood. Alternate Top Bevel. Tool No. Teeth Plate aº Top 00.00A ".07"(2.2mm).063"(.6mm) 20 ATB 00.00A."(3.2mm).07"(2.2mm) 20 ATB 00.20A2 2."(3.2mm).07"(2.2mm) 20 ATB 00.A.3"(3.5mm).0"(2.5mm) 20 ATB Carbide Tipped Cross Cut For ripping and cutting in solid soft-and hardwood. Tool No. Teeth Plate aº Top 00.5A 7 /4".07(.mm).047"(.2mm) 5 ATB 00.00A ".07"(2.2mm).063"(.6mm) 5 COMB 00.00A."(3.2mm).07"(2.2mm) ATB 00.20T."(3.2mm).0"(2.5mm) 5 TCG 00.A "(3.5mm).0"(2.5mm) 5 ATB 34 35

16 Carbide Tipped for Fine Crosscut For cross-grain cut in unseasoned and seasoned solid soft-and hardwood. For use on trimming and pendulum saws. For use with Radial Arm and Mitre Gxx Carbide Tipped Scoring For underside scoring of double side coated board terials in downcut. For use on vertical and horizontal panel sizing chines. alternate bevel tooth. Gxx Tool No. Teeth Plate aº Top 00.50H /2".07"(2.2mm).063"(.6mm) -3 ATB 00.00W0 0."(3.2mm).07"(2.2mm) -5 ATB 00.20N."(3.2mm).07"(2.2mm) -5 ATB 00.A0 00.3"(3.5mm).0"(2.5mm) 0 ATB 00.A "(3.5mm).0"(2.5mm) 5 ATB Tool No. Teeth Plate aº Top mm-3.6mm.07"(2.2mm) 0 KO-ATB mm-3.6mm.07"(2.2mm) mm 0 KO-ATB mm-3.6mm.07"(2.2mm) 3/4" 0 KO-ATB Carbide Tipped for Laminated Boards For finest cutting results. For single or double side coated wood board terials. For use on trimming and pendulum saws. Tool No. Teeth Plate aº Top 00.00H ".04"(2.4mm).07(.mm) -5 H-ATB 00.00H0 0."(3.2mm).0"(2.5mm) -5 H-ATB 00.00T0 0."(3.2mm).07"(2.2mm) 0 TCG 00.20H."(3.2mm).0"(2.5mm) -5 H-ATB 00.5H."(3.2mm).0"(2.5mm) -5 H-ATB 00.20T."(3.2mm).07"(2.2mm) 0 TCG 00.20N."(3.2mm).07"(2.2mm) -5 TCG 00.H0 00.3"(3.5mm).0"(2.5mm) -5 H-ATB 00.T0 00.3"(3.5mm).0"(2.5mm) 0 TCG Carbide Tipped Solid Surface For clean cutting of thermoplastic boards (acrylics, polyethylene etc.) up to 0mm thick, and duroplastic board (laminated sheet, phenolic resin bonded paper and phenolic laminated cotton sheet) up to 6 mm thick. Also for clean cutting of double-side plastic coated board, preferably in combination with pre-scorer. For use on bench saws and vertical panel-sizing saws. Triple-chip-flat teeth. Tool No. Teeth Plate aº Top 00.5T 7 /4"."(3.0mm).07"(2.2mm) 0 TCG 00.20T0 0."(3.0mm).07"(2.2mm) 5 TCG Carbide Tipped Non-ferrous metal / aluminum (thick walled) For sizing non-ferrous metal and plastic profiles and sizing non ferrous metal sheets. For use on trimming and mitre saws. Triple-chip-flat negative. Tool No. Teeth Plate aº Top 00.00N ".04"(2.4mm).07(.mm) -6 TCG 00.00N0 0."(3.2mm).0"(2.5mm) -5 TCG 00.20N0 00."(3.2mm).0"(2.5mm) -5 TCG 00.N0 00."(3.2mm).0"(2.5mm) -5 TCG 37

17 Carbide Tipped Steel For split cuts in thin wall steel profiles, cast and sheet steel, copper, aluminum, brass. For use on Dry-Cutter chines (d= ). Flat tooth with alternate bevel, extreme chip limiting. For use on Jepson Dry Cutter 32, Rigid No. 50, n. x 2000 Gxx Carbide Tipped Glue line / Cross Cut / General Purpose For ripping and cross cutting in solid soft-and hardwood, plywood, chipboard and composite terials. For use on bench and panel sizing saws. Gxx Tool No. Teeth Plate aº Top 00.5T4 7 /4" 4.07"(2.0mm).063"(.6mm) 0 5 FWF 00.50T4 /4" 4.07"(2.2mm).07(.mm) 0 5 FWF 00.00F.02"(2.6mm).07"(2.2mm) 2 5 FWF 00.20F.04"(2.4mm).07(.mm) 0 5 FWF 00.F0 0.02"(2.6mm).07"(2.0mm) 0 5 FWF Tool No. Teeth Plate aº Top 00.5A 7 /4".04"(2.4mm).063"(.6mm) 5 COMB 00.00A4 " 4.07"(2.2mm).063"(.6mm) 3 ATB 00.50H /2".07"(2.2mm).063"(.6mm) -3 ATB 00.00A50 50."(3.2mm).07"(2.2mm) 5 COMB 00.00N50 50."(3.2mm).07"(2.2mm) -5 COMB 00.20A4 4."(3.2mm).07"(2.2mm) 3 ATB 00.20A."(3.2mm).07"(2.2mm) 5 ATB 00.5A."(3.2mm).07"(2.2mm) 0 ATB 00.20C."(3.2mm).07"(2.2mm) 5 COMB 00.20H."(3.2mm).07"(2.2mm) -5 COMB 00.A "(3.5mm).0"(2.5mm) 5 ATB 00.H "(3.5mm).(2.mm) -5 H ATB Carbide Tipped Thin Mitre For use mitre saws, compound sliding and non sliding mitre saws. Ideal for cabinet king and precise trim work. Perfect for under-powered saws. Tool No. Teeth Plate aº Top 00.00A "(2.4mm).07(.mm) 0 HI-ATB 00.00T "(2.4mm).07(.mm) 0 TCG 00.20A "(2.6mm).07(.mm) 0 ATB 00.20T "(2.6mm).07(.mm) 0 TCG 00.A0 0.(2.mm).07"(2.0mm) 0 ATB 00.T0 0.(2.mm).07"(2.0mm) 0 TCG 3 3

18 Carbide Tipped for Plywood For fine Veneered and single side coated plywood boards. For use on bench and panel sizing saws. Gxx Woodpecker Carbide Tipped Tool No. Teeth Plate aº Top 00.5A 7 /4".07(.mm).047"(.2mm) 5 ATB 00.00A ".07"(2.2mm).063"(.6mm) 0 ATB 00.00A."(3.2mm).07"(2.2mm) 5 ATB 00.00A0 0."(3.2mm).07"(2.2mm) 0 ATB 00.20A."(3.2mm).07"(2.2mm) 0 ATB 00.5T4 4."(3.2mm).07"(2.2mm) 0 TCG 00.A0 0.3"(3.5mm).0"(2.5mm) 0 ATB Carbide Tipped for Sizing Particle Boards For clean cutting of partical boards (chipboard and MDF) single side faced. For use on bench saws and vertical panel-sizing saws. Tool No. Teeth Plate a Top 00.00T ".04"(2.4mm).07(.mm) 0 TCG 00.00T."(3.2mm).07"(2.2mm) 5 TCG 00.20T."(3.2mm).07"(2.2mm) 0 TCG 00.20A."(3.2mm).07"(2.2mm) 0 ATB 00.20W."(3.2mm).07"(2.2mm) -5 ATB 00.T0 0.3"(3.5mm).0"(2.5mm) 0 TCG Dir s Woodpecker Professional Carbide Tipped Saw Blades are designed for the everyday woodworker. Whether they are used on the job site or in the shop, all woodworkers will now be able to purchase affordable professional-quality cutting saw blades. These professional grade blades are nufactured in Gerny by our renowned Dir-Guhdo GmbH factory, which has a history that spans over 00 years in the cutting tool industry. We are confident that these blades will give you the cut you need at the price you want! Thinner than our NOVA and Gxx saw blades, the Woodpecker thin-kerf blades will ke it easier to rip through thick stock without bogging down a table saw. These specially-designed blades require less power because they have thinner plates and narrower tips. These blades are ideal for job site table and miter saws. Our Woodpecker Thin blades are available in Alternate Top Bevel grind, (for cutting hardwood, softwood and plywood), Triple-Chip Grind (for chipboard and laminate-covered terial), and flat top grind (for ripping). The use of stabilizers is recommended when cutting stock over 3/4 thick. Features and Benefits: For general ripping, crosscutting and finishing of wood, plywood, particle board and laminates. Micro-grain tungsten carbide teeth for optimum durability and prolonged tool life. Long & thick carbide teeth that tolerate over 5 sharpenings. Non-adhesive black coating for easy cleaning and moother operation. Premium quality stiff plate for true cutting even under load. 4

19 Carbide Tipped Rip/Crosscut Blade, Thin, Alternate Top Bevel For general ripping and crosscutting along and across the grain of wood, plywood, and particle board. Micro-grain titanium carbide teeth. Non-adhesive black coating. Thick carbide teeth. Premium quality, de in Gerny. Features & Benefits: Long & thick carbide teeth (0mm x 2.5mm on T, T, T blades) for 5-20 sharpenings. Micro-grain titanium carbide for longer service life. Non adhesive black coating for easy cleaning and smoother operation. Premium quality stiff plate for true cutting even under load. Guaranteed quality Made in Gerny Carbide Tipped Combination Saw Blade, Thin, Chip Limiter All purpose saw blade for ripping and cutting along and across the grain. For easy feed in wood, plywood and particle board. Micro-grain Titanium carbide teeth. Non-Adhesive black coating. Thick carbide teeth. Premium quality. Made in Gerny. Tool No. Teeth WP050COM* 50.(2.mm) *Chip Limitation Design 0 Made in Gerny Tool No. Teeth WP0CLA*.02"(2.6mm) *Chip Limitation Design.0 3 POSITIVE HOOK ANGLE ALTERNATE TOP BEVEL POSITIVE HOOK 5 Carbide Tipped for & Laminate, Triple Chip (TCG), Thin For cutting solid woods against the grain and single sided laminated boards. Thick carbide teeth de of Micro-grain titanium for exceptional durability and ultite perfornce. Blade surface is coated with Non adhesive black coating for smooth cutting. Excellent cutting quality. Made in Gerny 2 ALTERNATE TOP BEVEL & FLAT Made in Gerny Carbide Tipped Cut Off, Thin, Alternate Top Bevel For general crosscutting along and across the grain and trimming of wood, plywood, and particle board. Micro-grain titanium carbide teeth. Non-adhesive black coating. Thick carbide teeth. Premium quality, de in Gerny. Made in Gerny Tool No. Teeth WP0T.02" (2.6mm) WP00T 0.02" (2.6mm) 5 Tool No. Teeth WPA ".02" (2.6mm) WP0A.02" (2.6mm) 7 POSITIVE HOOK ANGLE TRIPLE CHIP GRIND WP0A.02" (2.6mm) WP00A 0.02" (2.6mm) 5/ Carbide Tipped Miter Saw Blade, Thin For cutting across and along the grain in wood, plywood, hardboard and particle board. Used in sliding, compound, miter saws and radial arm saws. Micro-grain Titanium carbide teeth. Non-Adhesive black coating. Thick carbide teeth. Premium quality. Made in Gerny. Tool No. Teeth Made in Gerny WP0A 70.(2.mm) 7 POSITIVE HOOK ANGLE ALTERNATE TOP BEVEL HOOK ANGLE ALTERNATE TOP BEVEL & FLAT 43

20 Carbide Tipped Dado Set - For wood, /4 to Made in Gerny Carbide Tipped - Grooving / Door Jam For Hand Held Grinders A door jamb is the vertical section of a door frame, which acts as a support for the reinder of the frame, as well as the door itself. Each frame has two jambs. The hinge jamb is the side where the hinges are installed, and the strike jamb is the side where the locking mechanism latches into the strike. The jambs are also used to mount the frame to the surrounding wall. The horizontal member that connects the two jambs is called the head. The terial used to ke a door jamb is largely determined by where it will be used. In most residential settings, the door frame is de of wood. It is typically hidden by casing or trim, so the type and finish of the wood. It is typically hidden by casing or trim, so the type and finish of the wood is generally not important. For commercial uses, hollow metal door jambs are most common, and are de of cold-rolled steel for interior applications, or galvanized steel for exterior use. Some architects y specify frames de of stainless steel or aluminum to provide a nicer finish, while fiberglass frames are used for their durability and weather-resistance. It is quite a challenge to cut the undercut door jambs flush or along the walls when installing carpet or tile. That is exactly why the Dir Door Jamb Blade will save you time by doing hot cuts on the job. Tool No. Teeth 4 3/4-2 ATB 4 3/4" 2. (2.mm) 7/" 4 3/4- ATB 4 3/4". (2.mm) 7/" B SNP SNP This Carbide tipped safety Dado set will produce flat bottom grooves with splinter free edges in natural woods. Fully versatile, this dado set can be set from /4 to widths at / increments. Micro increments widths are de with the provided shims. Positive angle tooth design, coupled with anti kick back body, will result in safe and easy feed while protecting your chine from overload. This dado set has all the features of an expensive dado, at a very attractive price. The set consists of: 2 pc dado blades / pc /4 thick chipper 2 pc / thick chipper pc 3/ thick chipper pc / thick chipper pc shim set Instruction nual. The dado set is protected in an Aluminum case with foam insert, for safe keeping. Tool No. Teeth WPDCL " /4"-2/" Dado Shims Set of Dado Shims. Made from durable plastic, these shims are color coded for different thickness. Features & benefits: Thick & long carbide teeth for ny sharpenigs. C4 carbide will hold sharp edge for longer tool life. Non adhesive black coating for easy cleaning Non adhesive black coating for easy cleaning 3/ chipper for sll increments to accommodate actual wood sizes. Solid hub dado blades for ximum stability. Very economical. 5 Carbide Tipped for Portable or Stationary circular saw chines Alternate Top Bevel (ATB) tooth grind for crosscutting or ripping. Thin kerf design for fast, smooth cutting that will require less power from your saw chine. Fits Makita Slide compound saw LS07Z. For Wood D 0 0 Laser Cut Laser cut expansion slots for reduced vibration C Steel Body Fully hardened, heat-treated steel body for accurate cutting and virtually no run out Carbide Teeth Micro-grain carbide teeth for longer life Copper Plugs For low noise reduction Tool No. Description Outside Dia Inside Dia S Set consists of 2 3/4" 4 shims.002" Clear 2 shims.006" Blue 4 shims.0 Red Tool No. Teeth WP70X 7 /2".04 (2.4mm) 0 B 0 4 shims.020" White S- Set consists of 2 3/4 4 shims.002" Gold 2 shims.006" Yellow 4 shims.0 Clear 4 shims.020" White 5 D C 44 45

21 0mm 00mm Teeth Tool No SCOR 20 00mm 00mm 00mm 00mm 00mm 00mm 00mm 00mm 00mm 00mm 00mm 5mm 5mm /4" 2 4 3/4" mm 50mm 50mm 50mm 46 Quick Selection Guide mm,, Grooving Saw - Alum mm 00-20A SCOR.54"(3.mm) 4- N/F.02"(2.6mm) 4- ATB-.54"(3.mm) 4- N/F mm SCOR mm SCOR mm 00-ADJ-20SCOR mm 00-2-SCOR mm 00-ADJ-SCOR mm 00-2-SCOR mm 00-ADJ-SCOR 00ADJ.54"(3.mm) 4 /2- N/F.54"(3.mm) 4 /2- N/F 3.35mm mm 20-A SCOR mm 20ATD mm mm mm SCOR mm 20-ADJ-20SCOR mm 20-2-SCOR mm 20-ADJ-SCOR mm 20-2-SCOR mm 20-ADJ-SCOR mm SCOR 20ADJ mm 20-B SCOR 20-C SCOR 20CTD 2.mm-3.6mm mm-3.6mm mm-3.6mm (2.mm) 4 3/4-2 ATB. (2.mm) 4 3/4- ATB 3.35mm mm 25-A SCOR mm 25-B SCOR 25-C SCOR 25CTD mm mm mm mm mm SCOR mm 25-ADJ-20SCOR mm 25-2-SCOR mm 25-ADJ-SCOR mm 25-ADJ-SCOR 25ADJ mm 50-A SCOR mm 50-B SCOR 50-C SCOR Description Type RIP 5,6,7, Grooving Saw - Alum.,, mm mm 3/4" 3/4" #N/A 7/" Grooving Saw - Alum. 7/" Grooving Saw - Alum. mm,,,,,, mm mm 3/4" 3/4" 50mm+4P.H. #N/A,,, Scoring Saw, mm Scoring Saw 3/4" Scoring Saw 7/" Carbide Tpped Saw 7/" Carbide Tpped Saw mm,,,,, mm mm,, mm mm 3/4" #N/A /4" 5,6,7,,,, Page Types Teeth Tool No. 50mm 50mm 50mm 50mm 50mm 50mm 50mm 6" 6 /4" 4 mm 4 mm mm mm mm mm mm mm SLIDING COMPOUND MITRE mm mm 4 4 mm 54 5mm 2 5mm 2 0mm 0mm 0mm 0mm 0mm 0mm 0mm 0mm 0mm 0mm 0mm 44 0mm 45 0mm 54 0mm 7 /4" 7 /4" 7 /4" 7 /4" 7 /4" 7 /4" PORTABLE 2 MITRE 3 LIGHT DUTY TABLE 5 RADIAL ARM 6 HEAVY DUTY TABLE 7 VERTICAL GRINDER 7 /4" 7 /4" 4 7 /4" 4 7 /4" 5 7 /4" 0mm 4 0mm 4 0mm 0mm 7 /2" 200mm 200mm 200mm 200mm 50CTD A SCOR 50-B SCOR 50-C SCOR 6- DADO CL 6 /4-4 N/F CTD P 455P A 7 /4-00.5A 7 /4- HG 7 /4-00.5A 7 /4- TCG 7 /4-4 N/F 00.5T4 7 /4-5 N/F 00.5T WP70X Quick Selection Guide Description Type,, 5,6,7, mm, mm,,.25"-3/ DADO SET 4,5,6.(2.mm) Portable Saw - Alum.,, 2.2mm, 4.-5.mm, 2.2mm, 3PH 55mm 3PH 2.2mm, 2.2mm, 2.2mm, 2.2mm, 4.-5.mm mm 5,6,7, 2.4mm,, 5,6,7, 4.-5.mm mm 55mm mm 50mm 2.4mm, 2.4mm, 2.4mm, 2.4mm, 2.4mm,.07(.mm) Crosscut Saw."(3.0mm) Portable Saw - Wood..04"(2.4mm) General Purpose Saw." (3.2 mm) Portable Saw - Melamine."(3.0mm) Portable Saw - Wood..07(.mm) Saw Blade for Plywood."(3.0mm) Portable Saw - Wood..(2.mm) Portable Saw - Alum..07"(2.0mm) Steel Saw Blade.(2.mm) Portable Saw - Alum.."(3.0mm) Solid Surface Saw Blade, 5,6,7,, 5,6,7,.04"(2.4mm) Carbide Tpped Saw, mm, 5,6,7, Page , 3 3, 3, 3, Types PORTABLE 2 MITRE 3 SLIDING COMPOUND MITRE 4 LIGHT DUTY TABLE 5 RADIAL ARM 6 HEAVY DUTY TABLE 7 VERTICAL GRINDER Diamond Knockout 47