ABRASIVE CATALOGS. Application: Weld dressing Cutting off smoothing of Casting Can be applied on various kind of Steel and non-ferrous materials

Size: px
Start display at page:

Download "ABRASIVE CATALOGS. Application: Weld dressing Cutting off smoothing of Casting Can be applied on various kind of Steel and non-ferrous materials"

Transcription

1 ABRASIVE CATALOGS Reinforced Depressed Centre Grinding Discs are excellently fabricated depressed centre grinding discs that are exclusively available in varying diameters of 4-9 in different thickness. These are made of quality raw material and hence these are able to withstand extreme loads offered by the grinding application with utmost safety. Reinforced Depressed Centre Grinding Discs are resin bonded abrasive wheels and resin bonded grinding wheels are specially reinforced with fiber glass reinforcements. Features: Fiber glass reinforced cold pressed depressed centre wheels Applicable and capable of running from to SFPM Ensures a high production ratio with no chances of breakage Full performance and maximum endurance Application: Weld dressing Cutting off smoothing of Casting Can be applied on various kind of Steel and non-ferrous materials

2 Sizes Available: (In mm) O.D X TH X I.D. Specification: 100 X 4 X 16 A 24 U8 BS4 100 X 4.5 X 16 A 24 U8 BS4 100 X 6 X 16 A 24 T8 BS4 125 X 6 X A 24 Q8 BS4 180 X 5 X A 30 S8 BS4 180 X 6.4 X A 24 S8 RS4 180 X 7 X A 30 S6 BS4 230 X 5 X A 30 S8 BS4 230 X 7 X A 30 Q8 BS4 Reinforced Cut-Off Wheels Reinforced Cut-off Wheels are reinforced and designed for resisting any breakage caused by heavy cross bending. These resin bonded wheels can be used for any operation where work is not clamped and deepness of cut is on the higher side. Abrasive grinding wheels are

3 available in different full sizes and can be customized for size, grade and more for large quantity. These Cut off wheels, also known as parting wheels, are self-sharpening wheels that are thin in width. They are often used in the construction industry for cutting reinforcement bars (rebar), protruding bolts or anything that needs quick removal or trimming. Most handymen would recognize an angle grinder and the discs they use. Features: Fiber glass reinforced cold pressed centre wheels Safely used on portable cut off machine up to speed of SFPM Universally free cutting and resistance to fracture Lasting performance Application: Major Industrial and Construction fields. Can be applied on bars, structural steel, tubing, sheet metal etc Can be applied on various kind of Steel and non-ferrous materials Sizes Available: (In mm) O.D X TH X I.D. Specification: 63 X 1.5 X 6.5 A 24 S6 BS4 63 X 2.5 X 6.5 A 30 S8 BS4 80 X 1.5 X 9.52 A 30 T8 BS4 80 X 2.5 X 6.5 A 36 Q8 BS4 100 X 3.2 X 12.7 C 30 S6 BS4 100 X 3.2 X C 24 U8 RS4 100 X 4 X C 46 R9 BS4 125 X 2 X X 3.2 X X 3 X X 3.2 X X 1.5 X X 2 X X 2.5 X X 3.2 X X 4 X X 5 X 22.23

4 230 X 7 X X 2 X X 2.5 X X 3 X X 3 X X 3.2 X 25.4 Straight grinding Wheels We offer a wide range of Straight grinding wheels; resin bonded grinding wheels and more. These resin-bonded abrasive products have higher tensile strength as compared to the vitrified bonded abrasive products and therefore these straight grinding wheels can withstand heavy grinding pressure and mechanical shocks. The wheels are generally made from a matrix of coarse particles pressed and bonded together to form a solid, circular shape, various profiles and cross sections are available depending on the intended usage for the wheel. These wheels in a precise and tightly controlled process, that insure

5 uniform composition to prevent that disc from exploding due to the high stresses produced on rotation. Features: Higher tensile strength as compared to the vitrified bonded abrasive products Capable of running up to 9500 SFPM Easy performance Application: The primary function of these straight grinding wheels is for stockremoval such as excessive weld etc Can be applied on bar stock, structural steel, tubing, sheet metal etc Can be applied on various kinds of Steel and non-ferrous materials Sizes Available: (In mm) O.D X TH X I.D. Specification: 50 X 10 X A 163 R 5 BS4 50 X 20 X 50 X 25 X 12.7 A 24 R 5 BS4 63 X 6 X 80 X 6 X A 46 R 5 BS4 100 X 3.2 X 100 X 6 X A 80 R 5 BS4 100 X 12 X 100 X 20 X A 80 R 5 BS4 150 X 10 X X 25 X X 10 X X 25 X X 25 X X 25 X 25.4 Fiber Disc (Paper Wheel): Brands Available: Xtrapower,Yuvi, many more Sizes Available: Sizes Grit Packing 5 24,36,60,80, IN 800 Out

6 4 24,36,60,80, IN 800 Out Flap Wheels: Brands Available: Xtrapower,Yuvi, many more Sizes Grit Packing 4 24,36,60,80, IN 200 Out G C Wheel: Brands Available: Xtrapower,Yuvi, many more Sizes Grit Packing 4 36,60,80,120, IN 200 Out Green Wheel :( FOR SS MATERIALS) Brands Available: Xtrapower,Yuvi, many more Sizes Grit Packing 4-50 IN 800 Out

7 MARBLE CUTTING BLADES (DIAMOND CUTTING BLADES) We are recognized among the distinguished manufacturers and suppliers of Diamond Cutting Tool for Marble. The blades of this tool are highly sharp and its edges will not get damaged even after longtime operations. Our competent engineers fabricate this tool making optimum utilization of the most-modern technology and optimum grade raw material. This tool is extensively used in cutting and processing polished porcelain tiles, rustic ceramic tiles, glazed ceramic tiles, resin borders, stone mosaics, etc. Features: Durability Superior quality. High Performance. Types: Marble Cutting Blade (Segmented) Sizes available: 4", 5", 12, 14".

8 TCT Saw Blade: Sizes available: 4" x 30 T 4" x 40 T 5" x 30 T 5" x 40 T 7" x 40 T 8" x 40 T 8" x 60 T 10" x 40T 10" x 60T 12" x 40T 12" x 60 T Rim Cutter Blade Sizes available: 4, 5", 7, 12, 14"

9 Turbo Marble Molding Blade: Sizes: 4 & 5 Marble Molding Cup shape Blade: Sizes: 4 & 5 For More Details Contact Us at:

O N T H E C U T T I N G E D G E O F T E C H N O L O G Y

O N T H E C U T T I N G E D G E O F T E C H N O L O G Y A B R A S I V E P R O D U C T S C A T A L O G U E O N T H E C U T T I N G E D G E O F T E C H N O L O G Y Founded in 1981, Grinding Techniques (Pty) Ltd. is the largest privately owned abrasive manufacturer

More information

BONDED ABRASIVE PRIMER

BONDED ABRASIVE PRIMER BONDED ABRASIVE PRIMER Basic information on the terminology and use of bonded abrasive products. Property of: KASCO ABRASIVES Coldwater, Michigan 1-800-367-729 Fax 517-279-7265 1 GENERAL BONDED ABRASIVES

More information

POWER TOOL ACCESSORIES

POWER TOOL ACCESSORIES POWER TOOL ACCESSORIES SUPER PREMIUM CHALLENGER SEGMENTED SAW 100% hot press Anti clog bond system High premium treated diamonds Effortless fast cutting Segmented 105 1.8 X 8 20 Super Hard Granite and

More information

A range of cutting & grinding solutions to meet your diverse needs

A range of cutting & grinding solutions to meet your diverse needs TM A range of cutting & grinding solutions to meet your diverse needs Orient Orient Introduction Meeting SME industry requirements Traditionally, Orient Abrasives had a strong lineup of Vitrified and Organic

More information

INTRODUCTION TO GRINDING PROCESS

INTRODUCTION TO GRINDING PROCESS GRINDING PART 2 Grinding Grinding is a material removal process accomplished by abrasive particles that are contained in a bonded grinding wheel rotating at very high surface speeds. The rotating grinding

More information

CLASS # 15 ACE DIAMOND BLADES

CLASS # 15 ACE DIAMOND BLADES CLASS # 15 ACE DIAMOND BLADES These blades are manufactured exclusively for Ace Industrial Supply and are available in a wide variety of applications under our own Ace Viper and Eagle Cut brands. They

More information

Cutting, Grinding and Abrasive Accessories

Cutting, Grinding and Abrasive Accessories High quality range of abrasive cutting discs, grinding discs and surface preparation accessories engineered for ultimate performance Universal Diamond Blades Cutting and Grinding Discs The essential construction

More information

Product Range. Solutions for Industry.

Product Range. Solutions for Industry. Product Range Solutions for Industry www.master-abrasives.co.uk Introduction Master Abrasives has a hard and long earned reputation in the UK abrasives market for providing solutions with high quality

More information

Grinders & Stones. Oregon X Chain Grinder. Oregon Hydraulic Assist Chain Grinder ENGINEERING

Grinders & Stones. Oregon X Chain Grinder. Oregon Hydraulic Assist Chain Grinder ENGINEERING Grinders & Stones For fast accurate chain sharpening, this well designed and constructed 220/240v electric chain grinder is ideal for workshop use and suitable for all chain pitches and types. The state-of-the-art

More information

ZENESIS. Pattern Technology: Hybrid Layering Performance Runs Deep. What is ZENESIS Pattern Technology? FROM THE COMPANY THAT STARTED A REVOLUTION

ZENESIS. Pattern Technology: Hybrid Layering Performance Runs Deep. What is ZENESIS Pattern Technology? FROM THE COMPANY THAT STARTED A REVOLUTION 2 What is ZENESIS Pattern Technology? ZENESIS is an advanced technology that delivers dramatic improvement in diamond tool performance through the custom designed diamond patterns specific to each application.

More information

Trade of Metal Fabrication. Module 1: Basic Fabrication Unit 12: Abrasive Grinding and Cutting Phase 2

Trade of Metal Fabrication. Module 1: Basic Fabrication Unit 12: Abrasive Grinding and Cutting Phase 2 Trade of Metal Fabrication Module 1: Basic Fabrication Unit 12: Abrasive Grinding and Cutting Phase 2 Table of Contents List of Figures... 4 List of Tables... 5 Document Release History... 6 Module 1

More information

Power Tool Accessories

Power Tool Accessories Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Masonry Diamond Cutting Diamond Cutting Blades Milwaukee Diamond Cutting Blades are designed to the highest standards only using quality diamonds.

More information

O N T H E C U T T I N G E D G E O F T E C H N O L O G Y

O N T H E C U T T I N G E D G E O F T E C H N O L O G Y A B R A S I V E P R O D U C T S C A T A L O G U E O N T H E C U T T I N G E D G E O F T E C H N O L O G Y Founded in 1981, Grinding Techniques (Pty) Ltd. is the largest privately owned abrasive manufacturer

More information

Sima Diamant has inaugurated its new European factory of diamond blades, equipped with stateof-the-art technology on all its manufacturing processes and with the philosophy of producing diamond tools able

More information

BY LACKMOND TILE PRODUCTS AND SOLUTIONS EQUIPMENT ACCESSORIES DIAMOND TOOLS

BY LACKMOND TILE PRODUCTS AND SOLUTIONS EQUIPMENT ACCESSORIES DIAMOND TOOLS TILE PRODUCTS AND SOLUTIONS EQUIPMENT ACCESSORIES DIAMOND TOOLS BEAST 10" WET TILE SAW BLADE SIZE: MOTOR CAPACITY: RIP CUT CAPACITY: DIAGONAL CUT CAPACITY: DEPTH OF CUT AT 90 : DEPTH OF CUT AT 45 : BEVEL:

More information

SALES: (248) Grinding Discs & Diamond Discs

SALES: (248) Grinding Discs & Diamond Discs SALES: (248) 669-3918 Grinding Discs & Diamond Discs EDGE GRINDING DIAMOND DISCS (248) 669-3918 Vexcel Rigid Disc General Purpose Rigid Grinding Disc The Vexcel is designed for heavy-duty material removal

More information

CATALOG ABRASIVES SERVING SMALL BUSINESS, FARM & RANCH, HOME WORKSHOPS, AUTOMOTIVE AFTERCARE, & THE INDUSTRIAL MARKETS SINCE 1932 P-10851

CATALOG ABRASIVES SERVING SMALL BUSINESS, FARM & RANCH, HOME WORKSHOPS, AUTOMOTIVE AFTERCARE, & THE INDUSTRIAL MARKETS SINCE 1932 P-10851 2016 ABRASIVES CATALOG SERVING SMALL BUSINESS, FARM & RANCH, HOME WORKSHOPS, AUTOMOTIVE AFTERCARE, & THE INDUSTRIAL MARKETS SINCE 1932 ABRASIVES CATALOG P-10851 Abrasives catalog Forney industries 2057

More information

FILE - DIAMOND GRIND CONCRETE STEPS

FILE - DIAMOND GRIND CONCRETE STEPS 15 July, 2018 FILE - DIAMOND GRIND CONCRETE STEPS Document Filetype: PDF 296.51 KB 0 FILE - DIAMOND GRIND CONCRETE STEPS A wide variety of concrete steps options are available to. 7 Step 50-1500 Grit Diamond

More information

Abrasives 31. Abrasives. ACCESSORIES Rubber Slotted Expander Wheels Slotted wheels for use with evenrun bands.

Abrasives 31. Abrasives. ACCESSORIES Rubber Slotted Expander Wheels Slotted wheels for use with evenrun bands. 215587 Pages 30-39 7/21/03 2:57 PM Page 30 3M Evenrun Bands Aluminum oxide bands are made of high-grade mineral and a bonding system which reduces shelling of the mineral. Economical abrasive bands for

More information

EMBRACE GRIND THE CUT-OFF DISCS GRINDING DISCS FLAP DISCS

EMBRACE GRIND THE CUT-OFF DISCS GRINDING DISCS FLAP DISCS EMBRACE THE GRIND CUT-OFF DISCS GRINDING DISCS FLAP DISCS grind The daily just got easier. At Osborn, we take pride in delivering results. We believe in innovation. Our deep understanding of applications

More information

RIGHT ABRASIVE DETERMINING THE BEST ABRASIVE POST-PROCESSING WELD GRINDING STARTS BY UNDERSTANDING THE FAMILY OF ABRASIVE PRODUCTS.

RIGHT ABRASIVE DETERMINING THE BEST ABRASIVE POST-PROCESSING WELD GRINDING STARTS BY UNDERSTANDING THE FAMILY OF ABRASIVE PRODUCTS. The RIGHT ABRASIVE DETERMINING THE BEST ABRASIVE by Terry Tupper, senior engineer, materials joining group, Fanuc FOR POST-PROCESSING WELD GRINDING STARTS BY UNDERSTANDING THE FAMILY OF ABRASIVE PRODUCTS

More information

Diamond / CBN Electroplated Tools. Diamond Lapping Compounds. Synthetic Diamond Powder / CBN. Diamond Shaped / Dressing Tools

Diamond / CBN Electroplated Tools. Diamond Lapping Compounds. Synthetic Diamond Powder / CBN. Diamond Shaped / Dressing Tools Gem Gem Diamond Products Diamond / CBN Electroplated Tools Diamond Lapping Compounds Synthetic Diamond Powder / CBN Diamond Shaped / Dressing Tools Diamond / CBN Resin Bonded Tools Diamond and CBN Electrodeposited

More information

Catalog 2017/2018. ROENTGEN Over 100 years experience in quality improvement you can t beat it!

Catalog 2017/2018. ROENTGEN Over 100 years experience in quality improvement you can t beat it! Catalog 2017/2018 ROENTGEN Over 100 years experience in quality improvement you can t beat it! WWW.ROENTGEN-USA.COM CONTENTS THE COMPANY OVER 100 YEARS EXPERIENCE 04 TECHNIQUE TOOTH PITCHES 06 SET PATTERNS

More information

ROENTGEN Over 100 years experience in quality improvement you can t beat it!

ROENTGEN Over 100 years experience in quality improvement you can t beat it! Catalog 2015/2016 ROENTGEN Over 100 years experience in quality improvement you can t beat it! WWW.ROENTGEN-SAW.COM CONTENTS THE COMPANY OVER 100 YEARS EXPERIENCE 04 TECHNIQUE TOOTH PITCHES 06 SET PATTERNS

More information

Pferd CC Grind grinding discs

Pferd CC Grind grinding discs Pferd CC Grind grinding discs CC-Grind Solid grinding disc Provide a 40% higher performance in compare with Noise and vibration reduced by 50%, dust reduced by 80%. Extremely robust and as safe as a grinding

More information

E TREMEFLAP FLAP WHEELS

E TREMEFLAP FLAP WHEELS E TREMEFLAP REFERENCE & APPLICATION GUIDE Flap Wheels EASY WAYS TO PLACE AN ORDER Phone: 905 282 1313 Fax: 905 282 1313 e-mail: sales@extremeabrasivesl.com Over the Web: (coming soon) EXTREME ABRASIVES

More information

STAR TOOL SUPPLY / GRAND TOOL SUPPLY

STAR TOOL SUPPLY / GRAND TOOL SUPPLY Tel: 20-5-8 / Fax: 20-59-7 50 Huyler St / So. Hackensack, NJ 070 USA JIG AND RECIPROCATING Starrett offers industrial quality high speed steel edge bi-metal saw blades. These blades have a high speed steel

More information

STRIP BISCUITS BACKING PAD HOLDERS SCUFF BELTS TUFF DUTY. 10 Discs per Box. Stock No.: 2 Dia. # U2SB 3 Dia. # U3SB 4 Dia. # U4SB U3SB U2SB U4SB

STRIP BISCUITS BACKING PAD HOLDERS SCUFF BELTS TUFF DUTY. 10 Discs per Box. Stock No.: 2 Dia. # U2SB 3 Dia. # U3SB 4 Dia. # U4SB U3SB U2SB U4SB STRIP BISCUITS TUFF DUTY HD and flexible applications Resilient dense core Black 10 Discs per Box 2 Dia. # U2SB 3 Dia. # U3SB 4 Dia. # U4SB U3SB U2SB U4SB SCREW-LOK BACKING PAD HOLDERS 1 # U1B 2 # U2B

More information

GRINDERS 86 SAWS 86-90

GRINDERS 86 SAWS 86-90 sawing, cutting & grinding GRINDERS 86 SAWS 86-90 MINI GRINDER Cuts and grinds masonry, concrete and metal. Cuts to a depth of 25mm Can be fitted with surface grinding wheel for facing and grinding Powerful

More information

Feel the difference. New products

Feel the difference. New products Feel the difference New products Italian Global Quality Founded in 1961 Globe is a family owned company located in Parma, Italy.Our team target is...global Quality: High productivity Offer cost-saving

More information

Finishing Process. By Prof.A.Chandrashekhar

Finishing Process. By Prof.A.Chandrashekhar Finishing Process By Prof.A.Chandrashekhar Introduction Finishing process are different from other manufacturing processes. The distinction between the finishing processes and other manufacturing processes

More information

Additional requirements and conditions for abrasive products to be marked with the osa symbol

Additional requirements and conditions for abrasive products to be marked with the osa symbol Appendix of paragraph 3 of the Conditions of Use for the osa Trademark Additional requirements and conditions for abrasive products to be marked with the osa symbol Conformance with the European safety

More information

Semiconductor Back-Grinding

Semiconductor Back-Grinding Semiconductor Back-Grinding The silicon wafer on which the active elements are created is a thin circular disc, typically 150mm or 200mm in diameter. During diffusion and similar processes, the wafer may

More information

Abrasive Machining Processes. N. Sinha, Mechanical Engineering Department, IIT Kanpur

Abrasive Machining Processes. N. Sinha, Mechanical Engineering Department, IIT Kanpur Abrasive Machining Processes N. Sinha, Mechanical Engineering Department, IIT Kanpur Introduction Abrasive machining involves material removal by the action of hard, abrasive particles. The use of abrasives

More information

PRODUCT CATALOGUE. A Company within the SWAROVSKI Group

PRODUCT CATALOGUE. A Company within the SWAROVSKI Group PRODUCT CATALOGUE A Company within the SWAROVSKI Group TABLE OF CONTENT TYROLIT Quality Lines Page 3 TYROLIT Labels Page 4 Cut-Off Wheels for Angle Grinders Page 5-6 Premium Line - Cut-off wheels Standard

More information

SHARPEN END OF END MILL. By George Pruitt

SHARPEN END OF END MILL. By George Pruitt SHARPEN END OF END MILL By George Pruitt Revised 3-5-13 The following instructions are for sharpening the end of an end mill with a Monoset tool and cutter grinder. Collet clamping nut Workhead Wheelhead

More information

DOUBLE-DEE. DIAMOND Stone. Construction. Diamond Wire +Beads.

DOUBLE-DEE. DIAMOND Stone. Construction. Diamond Wire +Beads. DOUBLEDEE DIAMOND Stone TOOLS Construction Diamond Wire +Beads Diamond Blades MultiWire Diamond Wire Diamond Blades Stone Stone Stone Construction Construction www.doubledee.com 2014 Introduction Double

More information

Professional Grade Tools For Concrete

Professional Grade Tools For Concrete Address: Room Building1 08 shuxiang Park. Xixian District, Xian, China Tel: 0086-0917-5550884 Fax: 0086-0917-5550884 Cell Phone: 0086-18292079229 Website: www.ronlon.com E-mail: sales@ronlon.com Professional

More information

EDM Polishing Stones General Purpose Stones Detail Stones Industrial Abrasives

EDM Polishing Stones General Purpose Stones Detail Stones Industrial Abrasives EDM Polishing Stones General Purpose Stones Detail Stones Industrial Abrasives Our commitment to our customers is set in stone. About Us For nearly forty years BORIDE Engineered Abrasives has developed

More information

IN-STOCK SUPERABRASIVE TOOLING. abrasive technology. Setting the global standards for Superabrasive Tooling

IN-STOCK SUPERABRASIVE TOOLING. abrasive technology. Setting the global standards for Superabrasive Tooling IN-STOCK SUPERABRASIVE TOOLING abrasive technology Setting the global standards for Superabrasive Tooling WELCOME TO ABRASIVE TECHNOLOGY S UK EXPRESS LINE CATALOGUE....................... This catalogue

More information

Casting Braided Steel

Casting Braided Steel Casting Braided Steel Contributed by: Neil Wright A.K.A Dai SENSEI This tutorial was downloaded from http://www.penturners.org The International Association of Penturners - 2016 CASTING BRAIDED STEEL By

More information

FOR INFORMATION CALL FLEX(3539) or VISIT OUR WEBSITE AT FLEXOVITABRASIVES.COM FLEX (3539) flexovitabrasives.

FOR INFORMATION CALL FLEX(3539) or VISIT OUR WEBSITE AT FLEXOVITABRASIVES.COM FLEX (3539) flexovitabrasives. Corporate Offices, Manufacturing Facility, Eastern U.S.A. Sales & Distribution Center 305 Eden-Evans Center Rd. Angola, New York 4006 United States of America Tel: (76) 952-9290 (76) 549-50 Fax: (76) 549-4078

More information

ASAHI DIAMOND. SILICON PROCESSING TOOLS for SEMICONDUCTORS SEMICONDUCTOR B-52-1

ASAHI DIAMOND. SILICON PROCESSING TOOLS for SEMICONDUCTORS SEMICONDUCTOR B-52-1 ASAHI DIAMOND SILICON PROCESSING TOOLS for SEMICONDUCTORS SEMICONDUCTOR B-52-1 Asahi Diamond makes a social foundation. We see electronics and semiconductor products used in various ways in our surroundings.

More information

grinding & polishing 39

grinding & polishing   39 grinding & polishing sales@trelawny.co.uk 39 grinding & polishing grinding & polishing - an introduction HOW THEY WORK Floor grinders use a horizontal rotating disc to perform a multitude of tasks, commonly

More information

Product Catalog. For Distribution Contact Us :

Product Catalog. For Distribution Contact Us : Product Catalog Diamond Polishing Pad Wet Series Ultra D Granite, Engineered Stone, Hard Stone Granite, Engineered Stone, Hard Stone WET Granite Surface Polishing, Granite Edge Polishing, Granite Floor

More information

Chapter 26 Abrasive Machining Processes. Materials Processing ABRASIVE MACHINING 10/11/2014. MET Manufacturing Processes

Chapter 26 Abrasive Machining Processes. Materials Processing ABRASIVE MACHINING 10/11/2014. MET Manufacturing Processes MET 33800 Manufacturing Processes Chapter 26 Abrasive Machining Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing Chapters

More information

special line perfect line evolution line

special line perfect line evolution line Flap discs 3 61 Product lines For craftsmen or industrial use - three precisely coordinated product lines offer the right flap disc for every user and every application. All discs comply with the relevant

More information

Nailbiter Premium Ship Auger Bits. RESI-MASTER Heavy-Duty Ship Augers

Nailbiter Premium Ship Auger Bits. RESI-MASTER Heavy-Duty Ship Augers Nailbiter Premium Ship Auger Bits Dual-Helix construction with twin cutting edges for faster and smoother drilling action, even through nail-embedded timbers Full body, dual induction heat treatment ensures

More information

Code Desc. Ø mm Ø hole mm. Code Desc. Ø mm Ø hole mm. With wire of corrugated steel. Suitable for removing rust, scale etc.. Employee of grinders.

Code Desc. Ø mm Ø hole mm. Code Desc. Ø mm Ø hole mm. With wire of corrugated steel. Suitable for removing rust, scale etc.. Employee of grinders. Circular brush steel wire Corrugated steel wire high strength. Suitable for deburring, satin finishing and polishing, to remove rust and metal cleaning. Code Desc. Ø Ø hole Thickness 3002700 77-150x16

More information

C U T T I N G C R O S S V I L L E P O R C E L A I N S T O N E

C U T T I N G C R O S S V I L L E P O R C E L A I N S T O N E C U T T I N G C R O S S V I L L E P O R C E L A I N S T O N E Wet saws are generally used when cutting tile. Crossville uses continuous rim diamond tip blades designed to cut porcelain tile and glass.

More information

Jig Saw Blades. Teeth (TPI) Color Code. Wood and Metal Cutting Jig Saw Blades. Progressor jig saw blades cut thin and thick material cleanly.

Jig Saw Blades. Teeth (TPI) Color Code. Wood and Metal Cutting Jig Saw Blades. Progressor jig saw blades cut thin and thick material cleanly. 212 2012/2013 Power Tools & Accessories Catalog Jig Saw s Bosch understands the need to cut materials quickly, smoothly and precisely. The company s broad product offering cuts both conventional and specialized

More information

S E R I E S C ATA L O G U E

S E R I E S C ATA L O G U E SERIES CATALOGUE Safety Precautions WARNINGS Wear working clothes suitable for the operation. In particular, eye protection equipment must be worn to prevent shavings from getting into your eyes. Prepare

More information

Traditional Grinding & Polishing

Traditional Grinding & Polishing Traditional Grinding & Polishing Grinding Wheels 3.2 Discs 3.4 Polishing & Buffing Powders 3.5 Felt Buffers 3.7 SECTION 3 Grinding Wheels RADIAC / NATIONAL SILICON CARBIDE WHEELS A high quality, made in

More information

MILLING and GRINDING MACHINES Machine Tools

MILLING and GRINDING MACHINES Machine Tools ELEMENTS OF MECHANICAL ENGINEERING PART B UNIT VI MILLING and GRINDING MACHINES Machine Tools 1 Objectives: 1.1 To understand the Principle of working of Milling, Horizontal & Vertical Milling. 1.2 Classification/Types

More information

ECONO QUALITY A value quality, entry level grade blade for the extremely cost conscious user Provides good cutting performance at low initial cost Ideal for first time and occasional users PREMIUM QUALITY

More information

MANUFACTURING TECHNOLOGY

MANUFACTURING TECHNOLOGY MANUFACTURING TECHNOLOGY UNIT IV SURFACE FINISHING PROCESS Grinding Grinding is the most common form of abrasive machining. It is a material cutting process which engages an abrasive tool whose cutting

More information

MK-370 TILE SAW OWNERS MANUAL PARTS LIST & OPERATING INSTRUCTIONS

MK-370 TILE SAW OWNERS MANUAL PARTS LIST & OPERATING INSTRUCTIONS www.mkdiamond.com MK-370 TILE SAW OWNERS MANUAL PARTS LIST & OPERATING INSTRUCTIONS Revision 20 02.207 Manual Part# 56760 Caution: Read all safety and operating instructions before using this equipment.

More information

Why Dressing. Pushing. Free penetrating

Why Dressing. Pushing. Free penetrating Why Dressing Pushing Free penetrating Dressed Blades Versus Non Dressed Blades High loads Low diamond exposure Low machinability High diamond exposure High machinability Dressing Dressing = Exposing diamonds

More information

A TRADITION OF QUALITY SINCE 1966 DIAMOND AND CBN WHEELS

A TRADITION OF QUALITY SINCE 1966 DIAMOND AND CBN WHEELS A TRADITION OF QUALITY SINCE 1966 DIAMOND AND CBN WHEELS POLTAVA DIAMOND TOOLS has been manufacturing top-quality diamond tools for the machine building, glass, electronic and woodworking industries since

More information

High performance in water starved environment

High performance in water starved environment wetdry Diamond Mini Hole Saw High performance in water starved environment a unique product that requires minimal coolant, no guiding and fast and easy slug ejection Ideal for very hard tiles, glass and

More information

Hornsby Woodworking Men s Shed. Guide to the Shed s Woodworking Machines

Hornsby Woodworking Men s Shed. Guide to the Shed s Woodworking Machines Guide to the Shed s Woodworking Machines SP00 Purpose The primary purpose of this document is to assist the induction of new members of the Hornsby Woodworking Men s Shed in the identification and understanding

More information

Metal /Ceramic/Resin hybrid diamond tools

Metal /Ceramic/Resin hybrid diamond tools Metal /Ceramic/Resin hybrid diamond tools Unique Patented diamond tools for profiling and polishign hard surfaces Excellent follow-up to quickly remove MB light to deep scratch patterns NO SCRATCH grinding

More information

BANDS ROLLS SAW BLADES BELTS SHEETS DISCS STARS STRIPS FLAPS WHEELS FILES

BANDS ROLLS SAW BLADES BELTS SHEETS DISCS STARS STRIPS FLAPS WHEELS FILES BANDS Coated Abrasive Bands...214 Non-Woven Nylon Bands...214 BELTS Coated Abrasive Belts...209 Cloth Polishing Belts...213 Non-Woven Nylon Belts...212 DISCS Clean n Strip Discs...218 Coated Abrasive Discs...216

More information

Introduction. Unitized abrasive materials. Context

Introduction. Unitized abrasive materials. Context Unitized Introduction With its slogan Time saving abrasives Cibo is constantly striving to save our customers time and money. The range of unitized abrasive materials fits in perfectly with this strategy.

More information

The manufacture of abrasive articles or shaped materials containing macromolecular substances, e.g. as bonding agent, is covered by C08J5/14.

The manufacture of abrasive articles or shaped materials containing macromolecular substances, e.g. as bonding agent, is covered by C08J5/14. CPC - B24D - 2016.11 B24D TOOLS FOR GRINDING, BUFFING, OR SHARPENING (tools for grinding or polishing optical surfaces on lenses or surfaces of similar shape B24B 13/01; grinding heads B24B 41/00; manufacture

More information

GlassTech Contact: Penny Cho Phone:

GlassTech Contact: Penny Cho   Phone: GlassTech Contact: Penny Cho Email: pennyc@glasstechsurfaces.com Phone: 630-306-7210 Fabrication, Handling, and Installation Instructions 1. Introduction GlassTech is a high grade, inorganic material produced

More information

THE COMPLETE RANGE OF ABRASIVE PRODUCTS FOR MERCHANDISING PRODUCT CATALOGUE

THE COMPLETE RANGE OF ABRASIVE PRODUCTS FOR MERCHANDISING PRODUCT CATALOGUE THE COMPLETE RANGE OF ABRASIVE PRODUCTS FOR MERCHANDISING PRODUCT CATALOGUE 2018 2 CONTENTS INTRODUCTION 4 The Flexovit Merchandising Program 4 The Flexovit Brand History 5 A Corporate Perspective 5 How

More information

BENCH & PEDESTAL GRINDING WHEELS

BENCH & PEDESTAL GRINDING WHEELS ENCH & PEDESTAL GRINDING WHEELS ENCH & PEDESTAL GRINDING WHEELS ROWN ALUMINUM OXIDE -Straight Aluminum oxide for general purpose off-hand work Straight vitrified wheels used for tool sharpening and grinding

More information

Saw, Files, Grinders and Brushes

Saw, Files, Grinders and Brushes ß 7005-7008 0 Overall length approx. 295, working length approx. 15, trim height approx. 25. 7005 Smooth, hardened cast steel wire, 0,35 Ø. Wire scratch brushes 7007 Brass wire, fine, 0,15 Ø, crimped.

More information

GRINDING MOULDER AND PLANER KNIVES

GRINDING MOULDER AND PLANER KNIVES BULLETIN 800H GRINDING MOULDER AND PLANER KNIVES Wisconsin Knife Works HSS, AKM, D-2, AND OPTI KNIVES When grinding moulder and planer knives, factors such as grinding wheel types and grit are often a

More information

INDUSTRIAL QUALITY SINCE CALL , or VISIT for more information.

INDUSTRIAL QUALITY SINCE CALL ,  or VISIT  for more information. ALL- CIRCULAR SAW BLADE LINE-UP for more information. WOODWORKER SERIES BLADES FOR THE PROFESSIONAL WOODWORKER Century s Woodworker Series blades are manufactured to the highest standards of precision

More information

Unit IV Drawing of rods, wires and tubes

Unit IV Drawing of rods, wires and tubes Introduction Unit IV Drawing of rods, wires and tubes Drawing is a process in which the material is pulled through a die by means of a tensile force. Usually the constant cross section is circular (bar,

More information

Product Overview. Electric Pneumatic Hydraulic. Concrete and Masonry Dust Collection Systems Hot Work Zone Tools

Product Overview. Electric Pneumatic Hydraulic.   Concrete and Masonry Dust Collection Systems Hot Work Zone Tools Electric Pneumatic Hydraulic Product Overview Metalworking Surface Finishing Surface Preparation Concrete and Masonry Dust Collection Systems Hot Work Zone Tools www.csunitec.com Metalworking In the shop

More information

Super Abrasives. Technical Information 276 Grinding Wheels 277 Diamond Dressing Tools 283

Super Abrasives. Technical Information 276 Grinding Wheels 277 Diamond Dressing Tools 283 Technical Information 276 Grinding Wheels 277 iamond ressing Tools 283 275 Technical Information The Flexovit Super Abrasive range provides technical solutions for the most popular applications encountered

More information

Introduction to Manufacturing Processes

Introduction to Manufacturing Processes Introduction to Manufacturing Processes Products and Manufacturing Product Creation Cycle Design Material Selection Process Selection Manufacture Inspection Feedback Typical product cost breakdown Manufacturing

More information

MILWAUKEE TOOLS

MILWAUKEE TOOLS INDEX ACCESSORIES BATTERY PACKS/CHARGER... 14-7 BIT EXTENSION... 14-9 BLADES BAND SAW... 14-7 CIRCULAR SAW... 14-10 SHEAR FOR MODEL 6850... 14-7 HOLE SAW KITS... 14-8 HOLE SAWS 4/6 BI-METAL... 14-8 ARBORS...

More information

Our existing DG diamond tools are as follow:

Our existing DG diamond tools are as follow: A.R.E. Blue Classic Products, LLC. 539 G ST. BLAINE WA.US. 98230 FAX: 360-332-5232 360-319-8254 360-332-5232 areblueclassic@gmail.com www.areblueclassic.com A.R.E. Stands for Artistically Designed, Real

More information

Elimination of Honing Stick Mark in Rack Tube B.Parthiban1 1, N.Arul Kumar 2, K.Gowtham Kumar 3, P.Karthic 4, R.Logesh Kumar 5

Elimination of Honing Stick Mark in Rack Tube B.Parthiban1 1, N.Arul Kumar 2, K.Gowtham Kumar 3, P.Karthic 4, R.Logesh Kumar 5 Elimination of Honing Stick Mark in Rack Tube B.Parthiban1 1, N.Arul Kumar 2, K.Gowtham Kumar 3, P.Karthic 4, R.Logesh Kumar 5 Assistant Professor, Dept. of Mechanical Engineering, Jay Shriram Group of

More information

CREATIVE TECHNOLOGY. Products Guide GRINDING WHEELS DRESSER VITRIFIED CBN WHEELS DIAMOND WHEELS & TOOLS PERIPHERAL EQUIPMENTS & RELATED PRODUCTS

CREATIVE TECHNOLOGY. Products Guide GRINDING WHEELS DRESSER VITRIFIED CBN WHEELS DIAMOND WHEELS & TOOLS PERIPHERAL EQUIPMENTS & RELATED PRODUCTS CREATIVE TECHNOLOGY Products Guide GRINDING WHEELS DRESSER VITRIFIED CBN WHEELS DIAMOND WHEELS & TOOLS PERIPHERAL EQUIPMENTS & RELATED PRODUCTS Diprotex meets all your grinding and polishing requirements,

More information

Technical Training USG Saw Chain Grinder

Technical Training USG Saw Chain Grinder Technical Training USG Saw Chain Grinder 1 USG HOS The STIHL USG Universal Sharpener will sharpen all types of saw chain. This is by far the most versatile and accurate machine of its type on the market.

More information

A range of cutting & grinding solutions to meet your diverse needs

A range of cutting & grinding solutions to meet your diverse needs TM A range of cutting & grinding solutions to meet your diverse needs Orient Orient Introduction Meeting SME industry requirements Traditionally, Orient Abrasives had a strong lineup of Vitrified and Organic

More information

Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.

Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. 1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.

More information

OVERVIEW - DUALTREAT GRINDING MACHINES VACUUMS BURNISHERS GRINDING TOOLS. BECO TREAT APS - Nebelvej Horsens (Denmark)

OVERVIEW - DUALTREAT GRINDING MACHINES VACUUMS BURNISHERS GRINDING TOOLS. BECO TREAT APS - Nebelvej Horsens (Denmark) OVERVIEW - DUALTREAT GRINDING MACHINES VACUUMS BURNISHERS LAVINA GRINDING MACHINES X-SERIES L20N-X / L25-X / L30G-X / L32-X LAVINA grinding machines are well known for their long lasting reliability. They

More information

Severance Offers Four Types of Hand Files To Solve Virtually Every Application

Severance Offers Four Types of Hand Files To Solve Virtually Every Application are Great for Many Application Filing Deburring Shaping Forming Chamfering Sharpening Smoothing Beveling De-Flashing Trimming and De-Scaling Severance Offers Four Types of To Solve Virtually Every Application

More information

2-01 EXTERNAL GRINDING

2-01 EXTERNAL GRINDING 2-01 EXTERNAL GRINDING 9.3.2016 2-02 EXTERNAL GRINDING Type Sketch Details Stock Page ø 75-175 mm, flat and external cylindrical grinding resin ceramic bond, diamond & CBN 2-04 1A1 ø 200-400 mm, flat and

More information

Gash. End Face. Clearance angle. Flute APPLICATION GUIDE

Gash. End Face. Clearance angle. Flute APPLICATION GUIDE Gash End Face Clearance angle Flute APPLICATION GUIDE TOOLGAL S BONDS TOOLGAL BONDS ARE DIVIDED INTO 4 MAIN GROUPS: Phenol group (Toolgal code CB) Pressed with thermal stability - 200 0 C Main applications:

More information

RECOMMENED TOOLS FOR MACHINING COUNTERTOPS

RECOMMENED TOOLS FOR MACHINING COUNTERTOPS Fabrication Manual RECOMMENED TOOLS FOR MACHINING COUNTERTOPS 1. Blades a) Segmented blade for porcelain. 4. Polishing Discs a) Silicon Carbide velcro discs for dry use. Grit 60, 120, 220, 400. 2. Grinding

More information

For Tool Room Applications

For Tool Room Applications High Performance Grinding Wheels... For Tool Room Applications Precision Engineered Grinding Wheels Tell us your needs... We'll Meet Them! Radiac Abrasives offers more than 30,000 precision built products

More information

Building Bigger Things. Woodworking Tools and Machinery. Marking Gauge. Thumb Screw. Stop Screw. Shoe. Beam. Pin. Head. Face Plate

Building Bigger Things. Woodworking Tools and Machinery. Marking Gauge. Thumb Screw. Stop Screw. Shoe. Beam. Pin. Head. Face Plate Woodworking Tools and Machinery Pin Shoe Face Plate Thumb Screw Head Stop Screw Beam Marking Gauge A marking gauge is used to mark a uniform width on a board. The steel combination square discussed in

More information

PFERD Australia - World Of Tools

PFERD Australia - World Of Tools PFERD Australia - World Of Tools VERTRAU BLAU Trust In The Blue Known globally for manufacturing quality abrasives. Your total abrasive solution. Tradition, Progress, Innovation A leading manufacturer

More information

Sandpaper Product Guide. Premium Automotive Aftermarket Quality Complete Selection of Hand & Power Sanding Accessories Excellent Value

Sandpaper Product Guide. Premium Automotive Aftermarket Quality Complete Selection of Hand & Power Sanding Accessories Excellent Value Sandpaper Product Guide Premium Automotive Aftermarket Quality Complete Selection of Hand & Power Sanding Accessories Excellent Value Index Introduction to Abrasives Abrasive Components... 3 Sandpaper

More information

Sheet Metal Tools. by:prem Mahendranathan

Sheet Metal Tools. by:prem Mahendranathan Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill

More information

BASIC RECOMMENDATIONS FOR FABRICATING WALKER ZANGER S SECOLO PORCELAIN SLABS

BASIC RECOMMENDATIONS FOR FABRICATING WALKER ZANGER S SECOLO PORCELAIN SLABS BASIC RECOMMENDATIONS FOR FABRICATING WALKER ZANGER S SECOLO PORCELAIN SLABS CNC Bridge Saw Cutting Parameters: Make certain the porcelain slab is completely supported on the flat, level, stable, and thoroughly

More information

Solid Carbide Tools. Composite Tools. Performance by Design. ISO 9001 Certified Company

Solid Carbide Tools. Composite Tools. Performance by Design. ISO 9001 Certified Company Solid Carbide Tools Composite Tools Performance by Design ISO 9001 Certified Company As one of the world s largest manufacturers of solid carbide rotary cutting tools, SGS Tool Company has pioneered some

More information

LIFE. The Wiss Difference Why Wiss aviation snips are better LIFE. The Blades. The Pivot. The Spring LONGEST PIVOT BOLT SPRING

LIFE. The Wiss Difference Why Wiss aviation snips are better LIFE. The Blades. The Pivot. The Spring LONGEST PIVOT BOLT SPRING Snips & HVAC Tools Wiss HVAC Tools. Built on a tradition of Wiss has been the leading brand in aviation snips for over 50 years. It is driven from two simple principles: durability and performance. Wiss

More information

ABRASIVES. Plus the New Pozzi Malibu Series! 3 Separate Product Lines

ABRASIVES. Plus the New Pozzi Malibu Series! 3 Separate Product Lines ABRASIVES 3 Separate Product Lines Plus the New Pozzi Malibu Series! Since 1971 Abrasives! Mandrels! Pozzi Has Them All! A wide selection of mounted and unmounted points, discs and wheels for operatory

More information

Diamond D Commstones

Diamond D Commstones Diamond D Commstones QUICKLY REMOVE FLAT SPOTS, HIGH BARS, GROOVES, RIDGES, HIGH MICA, AND OTHER COMMUTATOR AND SLIP RING DEFECTS Regular maintenance of commutators and slip rings with Martindale Commstones

More information

Fabrication Tips For ChromaLuxe & Unisub Substrate Sheetstock. By: David Gross, Keith Shifflett and Sara Nicholson

Fabrication Tips For ChromaLuxe & Unisub Substrate Sheetstock. By: David Gross, Keith Shifflett and Sara Nicholson Fabrication Tips For ChromaLuxe & Unisub Substrate Sheetstock By: David Gross, Keith Shifflett and Sara Nicholson Overview Many sublimators want to create their own special products and ask for tips on

More information

Avoiding Common Problems in Saw Preparation

Avoiding Common Problems in Saw Preparation Avoiding Common Problems in Saw Preparation Bruce Lehmann, P.Eng, Ph.D. This talk draws on the expertise of experienced sawfilers, and some research results to show practical techniques and possible problems

More information

QUALITY PRODUCTS AND SERVICE FOR OVER 35 YEARS.

QUALITY PRODUCTS AND SERVICE FOR OVER 35 YEARS. QUALITY PRODUCTS AND SERVICE FOR OVER 35 YEARS. Saw Blades BANDSAW BLADES Ram Sales stocks and welds bandsaw blades from a wide variety of World-Class manufacturers. Having multiple sources assures our

More information