C Cuisine Cart IMPORTANT NOTE
|
|
- Dayna Little
- 5 years ago
- Views:
Transcription
1 C Cuisine Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. PART LIST A. Side Panel F. ack Stretcher G. Front Rail. Side Panel H. Side Rack C. ase D. ack Piece I. Side Rack J. rush Chrome Pipes 3 pcs. E. ack Panel K. ase Rack L. Side Towel ar M. Shelf N. Door. O. Door. P. Drawer HARDWARE LIST Small Hex Wrench Hex Wrench (Middle) for top 4 pcs.(+ 1 extra) Pull Handle 16 pcs. (+ 1 extra) Caster two lock two non-lock 4 pcs. (short) for Side Towel ar (+ 1 extra) (long) 1(+ 1 extra) Machine Screw for Pull Handle 4 pcs. Adjustable Pin 4 pcs. (+ 1 extra) Wood Plug 8 pcs. (+2 extra) Tools Required For Assembly : Phillips screwdriver Home Styles Consumer Assistance Line and servicedesk@homestyles-furniture.com Revised date : 23Mar2011
2 IMPORTANT Do not tighten up all the screws until each part is properly assembled. You should keep Hex Wrench in the safe place as you may need to tighten up the s in the future. Assembly Instructions 2/4 STEP 1 Attach four Casters to the underneath of the ase (C). C Locking Caster Locking Caster D STEP 2 Attach the Side Panel () to the ase (C). Tighten up the s. Attach the ack Piece (D) on the ase rear. C Tighten Head Cap olt by Hex Wrench.
3 Assembly Instructions 3/4 F A E E STEP 3 Slide the ack Panel (E) in place. G Attach the ack Stretcher (F) on the unit with the. Attach the Front Rail (G) to the Side Panel () with. Attach the Side Panel (A) to the unit with s. J STEP 4 A Attach the Side Rack (H) to the Side Panel (A) with the s. H Attach the rush Chrome Pipes (J) to the pre-drilled holes of Side Rack (H). Attach the ase Rack (K) to the Side Rack (H). K J I Attach the Side Rack (I) to the Side Panel (A), using s. (for Side Towel ar) STEP 5 Attach the Side Towel ar (L) to the Side Panel () with s. L
4 Assembly Instructions 4/4 STEP 6 Now, you ll be able to create your own kitchen cart. Make your own choice of the Top, wood or stainless steel or granite. Place the Top on the unit, then tighten the s. (for Top) Insert the Adjustable Pins into both side panels at the desired level. Place Shelf (M) into place. (for Top) Adjustable pin M P STEP 7 Attach the Pull Handles to the Door (N) and (O) using the Machine Screws. (See figure 1) N O Attach the Door (N) and (O) to both side panels, slide the door lift hinges into the side frame lift hinges. (See figure 2) Slide the Drawer (P) into place. (Drawer is packed in separated carton). Figure 1 Figure 2 STEP 8 Cover up all holes with Wood Plugs
5 C Drawer (P) Unit Part List * If you are missing any of these parts, please contact our DMI Customer Service Department at or fax us at HARDWARE LIST. Front Part. Side Part. Side Part Pull Handle (for ase) 6 pcs.(+1 extra) P2. ack Part P5. ase Machine Screw for Pull Handle 2 pc. (for Side Part) 8 pcs.(+1 extra) Assembly Instructions P2 (Fig)1 (Fig) 1 Assemble the Front Part (), ack Part (P2) and Side Part () and (). Using a Phillips screw driver, insert 1 screw into the pre-drilled holes at the side parts, tighten half way. (Fig) 2 Slide the Plywood ase (P5) into the grooves on side parts. e sure to push the ase all the way forward so it meets the Front Part. P5 (Fig)2 (Fig) 3 (Fig)3 P2 P5 Insert the remaining ½ screws (6 pcs.) into the pre-drilled holes at the ase, then tighten up all screws. (Fig) 4 Assemble the Pull Handle to the Front Part with Machine Screw. (Fig)4
C PART LIST HARDWARE LIST. Kitchen Cart IMPORTANT NOTE
88 9200 006C Kitchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken
More informationD. Middle Panel. C. Middle Panel. 1 pc. B. Side Panel 1 pc. I. Back Stretcher. 1 pc. J. Front Stretcher. 1 pc. S. Door 1 pc. T.
itchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care
More informationJ. Base 1 pc. 1 pc. P. Shelf 2 pcs. Gate Leg. 1 pc. Head Cap Bolt 13 pcs. (+1 extra) Cam Lock Screw. Cam Lock. 20 pcs. (+1 extra)
88 5023 95C Kitchen Island with Breakfast Bar IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the
More informationM. Door 1 Pc. 1 Pc. Door 1 Pc. 1 Pc. M3x20 Wood Screw (long) 8 Pcs. (+1 extra) M3x10 Wood Screw for Magnet 8 Pcs. (+1 extra)
88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have
More informationBuffet with Doors and Drawers
88 5100 002 Buffet with s and s IMPORAN NO Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have
More informationArts & Crafts Dining Buffet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prev
88 580 69 Arts & Crafts Dining Buffet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood
More informationC PART LIST HARDWARE LIST. Tools Required For Assembly : Philips screwdriver. Thai Patent Pending Numbers
88508695 Stainless Steel Top Kitchen art with Wood reakfast ar Thank you for purchasing our quality products. Please carefully check the quantity of the parts and hardware. Please also read this assembly
More informationA. Top Unit 1 Pc. For assembly see instructions in carton:
88 5005 9441 Kitchen Island IMPRTANT NTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken
More informationBarnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratch
88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have
More informationColonial Classic Bar
88 5528 991 Colonial Classic Bar IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.
More informationLeft Unit. G. Shelf 1 pc. Small Cam Lock 6 pcs.(+1 extra) Cam Lock Screw 2 pcs.(+1 extra) Cam Lock Screw 6 pcs.(+1 extra)
88 5180 181 Art & Craft Computer Desk (Cottage Oak) IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring
More informationPantry IMPORTANT NOTE
88 5022 69 Pantry IPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great
More informationB. Side Panel. E. Middle Panel 1 pc. 1 pc. 1 pc. S. Side Rack. 1 pc. T. Base Rack. U. Pipe 3 pcs. M6x35 Head Cap Bolt 14 pcs.
IMPORTANT 88 5089 95C Kitchen Cart Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly
More informationPedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches
88 5549 181 Pedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken
More informationNantucket Buffet
88 5022 611 Nantucket Buffet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We
More informationIMPORTANT NOTE Do not tighten up all the screws until each part is properly assembled. You should keep Hex Wrench in the safe place as you may need to
88509995 C Kitchen Center Dear Our Valuable Customers, Please follow our assembly instructions in every step, we guarantee that you will get the perfect merchandise. Thank you so much for purchasing our
More informationPantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or oth
88 5076 691 Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have taken great
More informationFor assembly see instructions in carton
88 5523 943 Kitchen Island IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have
More informationHomestead Bar Cabinet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent s
88 5527 991 Homestead Bar Cabinet IMPRTANT NTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.
More informationC. Middle Panel. E. Front Post. J. Front Stretcher. O Brush Chrome Pipes. P. Handle Arm. U. KD. Drawer. Head Cap Bolt 14 pcs.
88 9100 001 itchen art (Natural Finish) IMPRTNT NTE arefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.
More informationKitchen Island IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches o
88 5170 943 Kitchen Island IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these
More informationPedestal Desk. D. Side Panel 1 pc. E. Side Panel. I. Back Panel. 2 pcs.
IMPORTANT 88 5530 182 Pedestal Desk Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these
More informationC. Side Panel 1 pc. B. Side Panel. 1 pc. J2. Shelf. 4 pcs. Adjustable Pin 24 pcs. (+1 extra) M3.5x16 Wood Screw 20 pcs. (+1 extra) 2 pcs.
IMPORTANT 20 05180 0307 Hutch Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly
More informationJ. Shelf 4 pcs. L. Door. K. Door. 1 pc. Magnet. 2 pcs. Adjustable Pin. 16 pcs. (+1 extra)
88 5523 61 Buffet IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly
More informationCloset Wall Drawer Unit
IMPORTANT 88 5531 752 Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions
More informationKitchen Work Cabinet Item #377635
Thanks for shopping with Improvements! Kitchen Work Cabinet Item #377635 To order, call 1-800-642-2112 West Chester, OH 45069 Made in Thailand 0912 Rev B If you have any questions regarding this product,
More informationCloset Wall Drawer Unit
88 5531 751 Closet Wall Drawer Unit A. B. C. Shelf D. E. F. For assembly see instructions in carton 88 5531 752. 88 5531 752 Closet Wall Drawer Unit G. H. I. Plinth M. Bottom L. N. 2 pc. J. K. O. Drawer
More informationStorage Island. M3x25 Wood Screw for Side Panels 4 pcs. (+1 extra) Adjustable Pin 12 pcs. (+1 extra)
IMPORTANT 88 5531 923 Storage Island Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these
More informationCloset Wall Hanging Unit
IMPORTANT 88 5531 772 Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions
More informationCloset Wall Shelf Unit
IMPORTANT 88 5530 762 arefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. arefully and strictly follow these assembly instructions
More informationASSEMBLY INSTRUCTIONS MANUAL
PAGE 1 OF 9 RECOMMENDED TOOLS FOR ASSEMBLY: ALLEN WRENCH (INCLUDED) BOX WRENCH (INCLUDED) PHILLIPS SCREW DRIVER (NOT INCLUDED) PARTS IN CARTON: ALLEN WRENCH SCREWS (20 EACH) ROUND HEAD SCREWS (8 EACH)
More informationIMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damag
IMPORTANT 20 05520 0772 Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions
More informationRiverside. Oakmont Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 1 pc. 8 pcs. 8 pcs. 8 pcs. 8 pcs. 1 pc. 1 pc. 20270 --5/0 Sleigh Headboard 20274 --5/0-6/6 Bed Rails 20273 -- 5/0 Storage Footboard, Panels, Slats Queen
More informationDOREL ASIA KITCHEN CART
DOREL ASIA Model No: WM6545N (Natural) WM6545W (White) UPC CODE: 0-65857-16525-8 (Natural) 0-65857-16526-5 (White) NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND
More informationThanks for shopping with Improvements! Providence Magazine End Table Item #547337
Thanks for shopping with Improvements! Providence Magazine End Table Item #547337 Note: This table can be assembled: with the Door pivoting from the right side or the left side (instructions show pivot
More informationKA327700TX MARTINVILLE KITCHEN CART - White Assembly Instructions
KA327700TX MARTINVILLE KITCHEN CART - White Assembly Instructions For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.com MARTINVILLE
More informationIMPORTANT SAFETY INSTRUCTIONS
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come loose inside the carton during shipment IMPORTANT SAFETY INSTRUCTIONS:
More informationE. Front Stretcher 1 pc. 1 pc. 1 pc. M8x38 Wood Screw (long) 1 pc. (+1 extra) M4x19 Wood Screw (short) 12 pcs. (+1 extra)
88 5134 26 Bench Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions
More informationMULTI-ACTIVITY PLAY TABLE
ASSEMBLY INSTRUCTIONS! WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.! CAUTION: Adult assembly required. C 2006 Melissa and Doug, Inc. All Rights Reserved www.melissaanddoug.com
More informationL.L.Bean. Wooden Slat Bed
L.L.Bean Wooden Slat Bed Thank you for purchasing our Slat Bed. Assembly of this product requires A Phillips head screwdriver. We have found it helpful to have a second person present in at least one step
More informationRiverside. Windhaven Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 2 pcs. 4 pcs. 4 pcs. 4 pcs. 2 pcs. 5/0 Queen Storage Bed 50773 -- 5/0 Storage Footboard w/platform Note: The 50773 Storage Footboard can be used with the 50770 Panel Headboard
More informationRiverside. Harbor Hill Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 2 pcs. 3 pcs. 3 pcs. 4 pcs. 4 pcs. 4 pcs. 1 pc. 1 pc. 8 pcs. 8 pcs. 8 pcs. 2 pcs. 8 pcs. 1 pc. 25770 -- 4/6-5/0 Panel Headboard (NOTE: the 25775 Leather
More informationRiverside. Harbor Hill King Storage Bed Assembly Instructions
King Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 2 pcs. 6 pcs. 3 pcs. 4 pcs. 4 pcs. 4 pcs. 1 pc. 1 pc. 2 pcs. 8 pcs. 8 pcs. 8 pcs. 8 pcs. 25780 -- 6/0-6/6 Panel Headboard (NOTE: the 25785 Leather Headboard
More informationCopyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM3010A RM315-R2 RM323-R2 RM329 RM451 RM457 RM3020A RM316 RM324-R2
More informationWhite Black Espresso Corner Desk Assembly Instructions
White Black Espresso Corner Desk Assembly Instructions Page 1 White / Black / Espresso Corner Desk Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on
More informationThanks for shopping with Improvements! Item #553001
Thanks for shopping with Improvements! Hampshire Wrapping Paper Hutch #00 Note: Read these instructions carefully before assembling. Tools required: Phillips screwdriver, flat screwdriver. ind a clean,
More informationFootprint Mobile Assembly Instructions
Footprint Mobile Assembly Instructions 1998754 Revision -1 Complete Series Master Packet If you have any questions concerning these instructions, please call Kimball Office Customer Service. 20 Kimball
More informationQueen Wingback Bed King Wingback Bed
Parts and Hardware List A. Side Rails with Attachment Hooks 2 pcs B. Foot Rail 1 pc C. Head Rail 1 pc D. Center Support Slat 1 pc E. Leg Supports 3 pcs F. Support Slats 4 pcs G. Flat Washers 8 pcs H. Lock
More informationThanks for shopping with Improvements! Item #553027
Thanks for shopping with Improvements! Hampshire File Ottoman #55307 Note: Read these instructions carefully before assembling. Tools required: Phillips screwdriver, flat screwdriver. Find a clean, smooth
More informationMyra Bed Room King Storage Bed Assembly Instructions. Hardware and Parts packed with the Headboard. One Left & One Right H-C
email: Headboard Panel info@riverside-furniture.com King Storage Bed Hardware and Parts packed with the Headboard Headboard Post Headboard Stretcher Page 1 of 7 H-A One Left & One Right H-C M5/16"-18 x
More informationExpandable Bar Cabinet CF4001
Expandable Bar Cabinet CF4001 Congratulations! You have purchased a stylish piece of Crosley Furniture. We strive to provide fine furniture products, built with quality materials and hand finished details.
More informationO-Sullivan King 4 Poster Bed O-Sullivan Queen 4 Poster Bed Parts and Hardware List
Parts and Hardware List A. Left Headboard Post 1 pc B. Right Headboard Post 1 pc C. Left Footboard Post 1 pc D. Right Footboard Post 1 pc E. Headboard Panel 1 pc F. Footboard Rail 1 pc. Spindles 4 pcs
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS UltraHD Rolling Cabinet (Model No. 20238F) 28"W X 18" D X 34.5" H (71.1cm x 45.7cm x 87.6cm) Stainless Steel Finger-print resistant Surface Special Cleaning instructions for work
More informationDisplay-Top Apothecary Cabinet. Assembly Instructions. Page 1
Display-Top Apothecary Cabinet Assembly Instructions Page 1 Display-Top Apothecary Cabinet Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean,
More informationStuff-Your-Stuff Platform Bed (Twin and Full)
Stuff-Your-Stuff Platform Bed (Twin and Full) Pre-Assembly: Please read all instructions before beginning assembly. Assembly by two people is a must. Save all packing materials until assembly is complete
More informationItem # Thanks for shopping with Improvements!
Thanks for shopping with Improvements! Hampshire -Door Cabinet Item #5505 To order, call -800-64- West Chester, OH 45069 Made in China PR-6 If you have questions regarding this product, call -800-64- Mon.-Fri.
More informationItem # GUN, 12 PISTOL CABINET WITH STORAGE
Item # 37-0046 9-GUN, 12 PISTOL CABINET WITH STORAGE Tools Needed For Assembly: Screwdriver Drill Assembly Tips: If you are using an electric screwdriver for assembly, set it at low torque and do not over-tighten
More informationExponents Bench Cushion
Exponents Bench Cushion Power Drill #2 Phillips Bit Bit Holder Page 1 of 2 939500640 Rev A 1. Place cushion on top of the bench, so the black Coalesse tag is in the right rear corner of the bench. 2. From
More information* For best quality print using Fit To Page setting in printer dialog box. SERVICE MANUAL CHGCT36
* For best quality print using Fit To Page setting in printer dialog box. SERVICE MANUAL CHGCT36 V7 Charge Cart Service Manual V7 Charge Cart Electrical Parts Replacement 1 PDU Replacement 1 Timer PDU
More information::kitchensource.com Alt Twin Headboard IMPORTANT NOTE Carefully remove all the parts from the carton and put them individua
::kitchensource.com 88 5530 401 Twin Headboard IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to
More informationThanks for shopping with Improvements! Rolling Kitchen Storage Cart with Wood Top Item #583649
Thanks for shopping with Improvements! Rolling Kitchen Storage Cart with Wood Top Item #58349 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included).
More informationShould you experience any missing or damaged parts, do not return to the store. Please contact us directly at
Congratulations! You have purchased a stylish piece of Crosley Furniture. We strive to provide fine furniture products, built with quality materials and hand finished details. Please carefully follow the
More informationL.L.Bean. Farmhouse Futon
L.L.Bean Farmhouse Futon Thank you for purchasing our Farmhouse Futon. Assembly of this product requires a Phillips Head Screwdriver and Flat Head Screwdriver. We have found it helpful to have a second
More informationThanks for shopping with Improvements! Chapin Secretary Desk Item #398643
Thanks for shopping with Improvements! Chapin Secretary Desk Item #398643 Note: You will receive this desk in two boxes. To order, call 1-800-642-2112 West Chester, OH 45069 Made in China 1111 If you have
More informationSAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" Page 20
SAM Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" 20 Step 6 LCD Mobile Lift Stand Model: STV-C65 Cable management
More informationNetRack. Please take a moment to make sure that you received everything that s included with your order. Each product is described below.
What You Should Have Received NetRack DECEMBER 2002 RM500A-R3 RM507-R2 RM501-R3 RM508-R3 RM502-R2 RM314 RM503-R3 RM315-R2 RM505A-R3 RM615-R2 RM506-R3 Please take a moment to make sure that you received
More informationMISSION AUDIO STAND GBU
MISSION AUDIO STAND Thank you for purchasing our Mission Audio Stand. Assembly of this product requires a Phillips screwdriver and a hammer. We have found it helpful to have a second person present in
More informationCopyright 2010, by Walker Edison Furniture Co., LLC. All rights reserved.
General Assembly Guidelines I. Insure that all parts and hardware are available before beginning assembly. II. III. IV. Follow each step carefully to insure the proper assembly of this product. Two people
More informationAssembly Instructions
1 27694 Trend Podium Assembly Instructions #27694 Trend Podium Part Drawing Description Qty Part Drawing Description Qty P-1 Base 1 EA Hardware List Screw M6x12mm 30 EA P-2 Right Side Panel 1 EA A2 Phil
More informationRack Furniture Suite 1, 2713 SE I Street, Bentonville, AR USA Customer Service:
HRLESTON LOFT ED Thank you for choosing Rack Furniture. efore starting, we suggest reading through this instruction manual to ensure that you completely understand the assembly of this product. Rack Furniture
More informationSTEP 1 STEP 2 LEVELER KIT OPTION MOBILE CASTER KIT OPTION
B SERIES INDUSTRIAL BENCHES TOOLS REQUIRED FOR ASSEMBLY Socket set, Open end wrench set, Cordless drill with 3/8" socket bit (Magnetic recommended). BEFORE ASSEMBLY Read through the assembly instructions
More informationAssembly Instructions Model Deep Island w/flat Panel Doors & Drop Leaf
Assembly Instructions Model 51539 Deep Island w/flat Panel Doors & Drop Leaf GENERAL: 1. You have purchased model 51539. 2. Should you need assistance or need to replace a damaged or missing part simply
More informationSetting Up the Polycom RealPresence Group Series Media Center
Setting Up the Polycom RealPresence Group Series Media Center Setting Up the Polycom RealPresence Group Series Media Center with a Single 55 or 65 Display or 55 Dual Displays Base Legs (4) M10 x 50 flanged
More informationThanks for shopping with Improvements! Laundry Folding Table with 3 Clothes Hampers Item #
-- Thanks for shopping with Improvements! Laundry Folding Table with 3 Clothes Hampers Item # 568376 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not
More informationHZ8864A0TX / HZ8864B0TX. Metal/Glass Sliding-Door Display Cabinet. Assembly Instructions PO: Each shelf supports up to lb.
HZ8864A0TX / HZ8864B0TX Metal/Glass Sliding-Door Display Cabinet Assembly Instructions For assistance with assembly, contact: Southern Enterprises Inc. Customer Service: 1-800-633-5096 service@seidal.com
More informationHEAVY DUTY 11 STEEL CABINET
HEAVY DUTY STEEL CABINET ASSEMBLY INSTRUCTIONS ONE DRAWER BASE CABINET 05-206 Parts List Part No Description Qty Image ONE DRAWER BASE CABINET Part No Description Qty Image SB- Cabinet Body EH-0 Euro Hinge
More informationASSEMBLY INSTRUCTIONS JK270
TOOLS REQUIRED: One knife to open packaging Two ½ wrench or socket (metric 13) One 9/16 wrench or socket (metric 14) One #2 Philips (+) screwdriver NOTE: All bolts are 9/16 (metric 14) and nuts are ½ (metric
More informationSteele TV Stand Stock # BH
LOT NUMBER: DATE PURCHASED: / / Steele TV Stand Stock # BH46-084-899-02 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store
More informationHodedah. HIK 77 L23 5 8'' X D16 6 8'' X H42 1 8''
HIK 77 L3 5 '' X D6 6 '' X H4 '' PART & HARDWARE LIST 4 7 0 3 3 6 4 5 5 A PLASTIC DOWEL M X 5MM M CAP 4 B CB SCREW M3.5 X MM N 0 MAGNET PLATE C CB SCREW M4 X 5MM O 0 MAGNET D CB SCREW M4 X 35MM P CB M3
More informationTransition Range Installation, Care & Adjustment Instructions
Introduction The following instructions will enable you to complete the final assembly and adjustment of your new furniture. Hardware Box Each of the cabinets contains a Hardware box that contains all
More informationAssembly Instructions Please keep for future reference Inspire 40
Assembly Instructions Please keep for future reference Inspire 40 Version 3 : 28/07/2014 Important - Please read these instructions fully before starting assembly ALR2902 Safety and Care Advice Important
More informationMelamine Plastic Laminate. Toilet Partition Installation Manual
Melamine Plastic Laminate Toilet Partition Installation Manual PHONE: FAX: 1-866-317-2786 ATTENTION DO NOT MIX FASTENER PACKS EACH FASTENER PACK HAS THE NECESSARY BOLTS, BARRELS AND SCREWS TO INSTALL THE
More informationCorner Desk Assembly Instruction PO# HO664200TX White. HO664300TX Black. HO664400TX- Espresso
HO664200TX White HO664300TX Black HO664400TX- Espresso Corner Desk Assembly Instruction For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com
More informationInstallation Instructions - Model V4JSD 1
Installation Instructions - Model V4JSD 1 Support Assemblies: Parts list: (Note see enclosed cut sheet for quantities and dimensional information) A vertical structural member (1 ½ x 1 ½ modular frame)
More informationASSEMBLY INSTRUCTIONS UltraHD Rolling Cabinet (Model No ) 28in. W x 18in. D x 34.5in. H (71.1cm x 45.7cm x 87.6cm )
ASSEMBLY INSTRUCTIONS 28in. W x 18in. D x 34.5in. H (71.1cm x 45.7cm x 87.6cm ) Reference page 16 for special care and maintenance of stainless steel TR170407 (pg 1 of 17) (pg 2 of 17) Small Drawer Medium
More informationCROWN IMPERIAL ASSEMBLY INSTRUCTIONS
CROWN IMPERIAL ASSEMBLY INSTRUCTIONS Standard Drawer Box Page 1 of 14 Standard Drawer Box Parts Parts Supplied B C D A E F G Page 2 of 14 Part Letter Part Name Quantity 300-600 Deep Pan A Base Panel 1
More informationImportant Loading Information. Tools Required. Meridian Lateral Files Instructions
Y Meridian Lateral Files Instructions! WARNING Failure to observe stated capacities below will result in unsafe usage conditions, causing possible product damage or personal injury. Important Loading Information
More informationBIFOLD FUTON FRAME TRINITY ARM. Seat Rails and Slats x 1. *Note: Use 4pc of 100mm Bolts and 4pc of 60mm Bolts to attach the arms to the Stretchers.
1A Parts in this box. 2pc with extra holes 2pc with extra holes & plastic stoppers Arms x 2 Back Rails and Slats x 1 Full Size: Slat Supports x 6 3pc are longer for the Back deck Back Side Rails x 2 Seat
More informationSamford Contemporary Computer Desk Model # JCS AD
LOT NUMBER: DATE PURCHASED: / / Samford Contemporary Computer Desk ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED If you have any questions regarding
More informationDANVER MOBILE KITCHEN CART AND COCINA ASSEMBLY INSTRUCTIONS PARTS LIST Description Qty. A. Top* 1 B. Front/Back Skirt 2 C. Towel Bar Skirt** 1 D. Uten
DANVER MOBILE KITCHEN CART AND COCINA ASSEMBLY INSTRUCTIONS PARTS LIST Description Qty. A. Top* 1 B. Front/Back Skirt 2 C. Towel Bar Skirt** 1 D. Utensil Hanger Skirt 1 E. Legs 4 F. Shelves 2 G. Towel
More informationThanks for shopping with Improvements! Wellesley Cart with Gate Leg Desk Extension Item #504992
Thanks for shopping with Improvements! Wellesley Cart with Gate Leg Desk Extension Item #504992 To order, call 1-800-642-2112 West Chester, OH 45069 Made in China PR-1015 If you have questions regarding
More informationVigilant Cigar Humidor Vault. Assembly Instructions
Vigilant Cigar Humidor Vault Assembly Instructions Models: 1000, 1500, and 2000 Congratulations! You have purchased a superior cigar humidor. These humidors have been specifically designed to properly
More information#916 CLASSIC 16 GUN CABINET ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. A list of PARTS and INSTRUCTIONS is included to assist you. Unpack and identify all parts included on the Parts List and Hardware List. If parts are missing,
More informationCAROLINA SWIVEL DESK CHAIR ASSEMBLY INSTRUCTIONS
pottery barn kids AROLNA SWVEL DESK AR ASSEMLY NSTRUTONS www.potterybarnkids.com Date: 2012-Jun-30 Page 1 of 5 mportant Safety nstructions: Please read all instructions carefully before assembling. or
More informationHZ1032A0TX/ HZ1032B0TX Shadowbox Wine/Bar Cabinet Assembly Instructions
HZ0A0TX/ HZ0B0TX Shadowbox Wine/Bar Cabinet Assembly Instructions For assistance with assembly contact: Southern Enterprises Inc. Customer Service -800--509 service@seidal.com www.seidal.com Due to weight,
More informationpottery barn kids MADISON CABINET HUTCH
pottery barn kids MADISON CABINET HUTCH IMPORTANT SAFETY INSTRUCTIONS: Please read all instructions carefully before assembling. For your safety, assembly by two adults is recommended. PRE-ASSEMBLY: Remove
More informationStainless Steel 95C34 Series
Stainless Steel 95C34 Series Toilet Partition Installation Manual PHONE: FAX: 866-317-2786 ATTENTION DO NOT MIX FASTENER PACKS EACH FASTENER PACK HAS THE NECESSARY BOLTS, BARRELS AND SCREWS TO INSTALL
More informationPRINCESS SINGLE BED WITH TRUNDLE
PRINCESS SINGLE BED WITH TRUNDLE If you have any questions regarding assembly or if you are missing parts, do not return this item to Sam s Wholesale Club Please call our customer service number and have
More informationVibe Buffet Assembly Instructions
ssembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. bolt bolt locking dowel long x nut x x0 screw x8 x H I J K small screw x4 V W safety strap x
More informationFA968800TX Manchester Fireplace Console - Brown Mahogany Assembly Instructions
FA968800TX Manchester Fireplace Console - Brown Mahogany Assembly Instructions For assistance with assembly, contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.com
More information