U.S. PATENT NOS. 6,688,816 and 6,824,333 INSERT WIDTH TOP RAKE (SIDE VIEW) APPLICATION REFERENCE PG 9-20
|
|
|
- Winfred Scott
- 6 years ago
- Views:
Transcription
1 U.S. PTENT NOS. 6,688,816 and 6,824,333 SERTS.025",.045",.062",.085" and.115" Parting off up to 1" diameter 0 or 7 lead angle Centered or Offset Sub-micron grain DUR-MX 2000 and 5000 s and High Speed Steel. Inserts available with TiN, Ti, TiCN and Diamond coating. RDII DEPTH OF CUT SERT WIDTH BCK CLERNCE MODIFICTIONS SEE PGE 8-3 FOR DDITIONL LED NGLE TOP RKE (SIDE VIEW) CHIP BREKER (SIDE VIEW) SIDE CLERNCE (END VIEW) CNC, SWISS, CONVENTIONL STYLE ROUND STYLE TOOLHOLDER THBIT KISER TOOL 3/4" GROOVE THBIT KISER TOOL CO 1" ROUND REVER THBIT PG 7-3 PG 7-4 PG 7-7 PG 7-8 DEMONSTRTION SPEEDS ND FEEDS PPLICTION REFERENCE TROUBLESHOOTG TECHNICL SECTIONS PG 9-20 PGS 9-3 & 9-4 PG Centered.240" FRONT RKE: CRBIDE: Primary 7 honed, Secondary 15 HIGH SPEED STEEL: 15 BCK CLERNCE: 0 LGPT045HS & LGPT062HS 1 all others SIDE CLERNCE: 1 RDIUS: None TOP RKE: 0 LED NGLE: 0 or 7 Parting Tools with Lead ngle.145".240" Centered Right Hand Lead 5-3
2 SERTS below that represents your selection of groove width and insert grade. The for an.085" wide parting insert in DUR-MX 2000 is: LGPT085D2 Insert Width Insert Lead ngle Depth of Cut Insert Grades See Page 9-5 for expanded material descriptions and Page 9-20 for Speeds and Feeds information Coatings See Page 9-6 for expanded coating descriptions Toolholder Overall Length Catalog Section 7 '' 'B' DUR-MX 2000 For Steel & Interrupted Cutting DUR-MX 5000 For luminum & Non-ferrous High Speed Steel uncoated part number and coating code ±.001" TiN TiCN TilN Diamond.025".045".062".085".115" Right Left Hand Hand LGPT025D2 LGPT025D5 LGPT025HS 7 Right Hand LGPT025D27R LGPT025D57R LGPT025HS7R 7 Left Hand LGPT025D27L LGPT025D57L LGPT025HS7L Right Hand 0 LGPT025D2R LGPT025D5R LGPT025HSR 7 Right Hand.200" LGPT025D2R7R LGPT025D5R7R LGPT025HSR7R 7 Left Hand LGPT025D2R7L LGPT025D5R7L LGPT025HSR7L Left Hand 0 LGPT025D2L LGPT025D5L LGPT025HSL 7 Right Hand LGPT025D2L7R LGPT025D5L7R LGPT025HSL7R 7 Left Hand LGPT025D2L7L LGPT025D5L7L LGPT025HSL7L LGPT045D2 LGPT045D5 LGPT045HS 7 Right Hand LGPT045D27R LGPT045D57R LGPT045HS7R 7 Left Hand LGPT045D27L LGPT045D57L LGPT045HS7L Right Hand 0 LGPT045D2R LGPT045D5R LGPT045HSR 7 Right Hand.500" LGPT045D2R7R LGPT045D5R7R LGPT045HSR7R 7 Left Hand LGPT045D2R7L LGPT045D5R7L LGPT045HSR7L Left Hand 0 LGPT045D2L LGPT045D5L LGPT045HSL 7 Right Hand LGPT045D2L7R LGPT045D5L7R LGPT045HSL7R 7 Left Hand LGPT045D2L7L LGPT045D5L7L LGPT045HSL7L LGPT062D2 LGPT062D5 LGPT062HS 7 Right Hand LGPT062D27R LGPT062D57R LGPT062HS7R 7 Left Hand LGPT062D27L LGPT062D57L LGPT062HS7L Right Hand 0 LGPT062D2R LGPT062D5R LGPT062HSR 7 Right Hand.500" LGPT062D2R7R LGPT062D5R7R LGPT062HSR7R 7 Left Hand LGPT062D2R7L LGPT062D5R7L LGPT062HSR7L Left Hand 0 LGPT062D2L LGPT062D5L LGPT062HSL 7 Right Hand LGPT062D2L7R LGPT062D5L7R LGPT062HSL7R 7 Left Hand LGPT062D2L7L LGPT062D5L7L LGPT062HSL7L LGPT085D2 LGPT085D5 LGPT085HS 7 Right Hand LGPT085D27R LGPT085D57R LGPT085HS7R 7 Left Hand LGPT085D27L LGPT085D57L LGPT085HS7L Right Hand 0 LGPT085D2R LGPT085D5R LGPT085HSR 7 Right Hand.500" LGPT085D2R7R LGPT085D5R7R LGPT085HSR7R 7 Left Hand LGPT085D2R7L LGPT085D5R7L LGPT085HSR7L Left Hand 0 LGPT085D2L LGPT085D5L LGPT085HSL 7 Right Hand LGPT085D2L7R LGPT085D5L7R LGPT085HSL7R 7 Left Hand LGPT085D2L7L LGPT085D5L7L LGPT085HSL7L LGPT115D2 LGPT115D5 LGPT115HS 7 Right Hand LGPT115D27R LGPT115D57R LGPT115HS7R 7 Left Hand LGPT115D27L LGPT115D57L LGPT115HS7L Right Hand 0 LGPT115D2R LGPT115D5R LGPT115HSR 7 Right Hand.500" LGPT115D2R7R LGPT115D5R7R LGPT115HSR7R 7 Left Hand LGPT115D2R7L LGPT115D5R7L LGPT115HSR7L Left Hand 0 LGPT115D2L LGPT115D5L LGPT115HSL 7 Right Hand LGPT115D2L7R LGPT115D5L7R LGPT115HSL7R 7 Left Hand LGPT115D2L7L LGPT115D5L7L LGPT115HSL7L 'C' 'D' 'E' 'F' 'C'.820".825" HSS 1.062" 1.078" HSS Toolholders Beginning With 'L' Series Centered any straight holder or 90º holder Right Hand right hand straight holder or left hand 90 holder Left Hand left hand straight holder or right hand 90 holder SERTS 5-4
3 U.S. PTENT NOS. 6,688,816 and 6,824,333 STRIGHT TOOLHOLDERS Designed for CNC, conventional and top slide position on Swiss screw machines. sizes 5/16", 3/8", 1/2", 5/8", 3/4", 1" and 1-1/4". Metric sizes also available. 3/4" GROOVE N TURN LGS34R C B SERT Scan this code for itional information. below that represents your selection of shank dimensions. The for a.750" Right Hand square shank for inserts beginning with 'L' is: LGS34R Dimensions Includes, Clamp and Hardware 7-3 Straight right with right hand inserts left with left hand inserts For Inserts Beginning '' 'B' 'C' With 'L' RIGHT LEFT.312".500" 4.840" LGS56R LGS56L.375".500" 4.840" LGS38R LGS38L.500".500" 4.840" LGS12R LGS12L.625".625" 4.840" LGS58R LGS58L.750".750" 4.840" LGS34R LGS34L 1.000" 1.000" 4.840" LGS01R LGS01L 1.250" 1.250" 4.840" LGS14R LGS14L 8mm.500" 4.840" LGS08RM LGS08LM 10mm.500" 4.840" LGS10RM LGS10LM 12mm.500" 4.840" LGS12RM LGS12LM 16mm.750" 4.840" LGS16RM LGS16LM 20mm 1.000" 4.840" LGS20RM LGS20LM 25mm 1.000" 4.840" LGS25RM LGS25LM Clamp Screw Wrench Pin Right Hand: Clamp X Left Hand: Clamp Y S3808 W1005 P0206
4 U.S. PTENT NOS. 6,688,816 and 6,824,333 90º TOOLHOLDERS Designed for CNC and conventional machines. sizes 5/16", 3/8", 1/2", 5/8", 3/4", 1" and 1-1/4". Metric sizes also available. 3/4" GROOVE N TURN LGSF34R B C SERT Scan this code for itional information. below that represents your selection of shank orientation and dimensions. The for a.750" right hand shank for inserts beginning with 'L' is: LGSF34R 90º right with left hand inserts left with right hand inserts Dimensions Includes, Clamp and Hardware For Inserts Beginning With 'L' '' 'B' 'C' RIGHT LEFT Clamp Screw Wrench Pin.312".500" 4.840" LGSF56R.375".500" 4.840" LGSF38R.500".500" 4.840" LGSF12R.625".625" 4.840" LGSF58R LGSF58L.750".750" 4.840" LGSF34R LGSF34L 1.000" 1.000" 4.840" LGSF01R LGSF01L 1.250" 1.250" 4.840" LGSF14R LGSF14L 8mm.500" 4.840" LGSF08RM 10mm.500" 4.840" LGSF10RM 12mm.500" 4.840" LGSF12RM 16mm.750" 4.840" LGSF16RM LGSF16LM 20mm 1.000" 4.840" LGSF20RM LGSF20LM 25mm 1.000" 4.840" LGSF25RM LGSF25LM Clamp C S3808 W1005 P GROOVE 'N TURN TOOLHOLDERS
5 U.S. PTENT NOS. 6,688,816 and 6,824,333 ROUND REVERSIBLE TOOLHOLDERS Designed for boring bar positions on all machines. Can be used with a boring head to trepan on a mill. may need to be shortened. Toolholder reversible by removing face and bottom screws and rotating head 1/2 turn. sizes 1/2", 5/8", 3/4" and 1". ll 1/2", 5/8" and 3/4" shanks are made from 1" shank. 1" 5.5" 5/8" REVERSIBLE ROE58 THBIT SERT Scan this code for itional information. below that represents your selection of shank dimensions. The for a.625" round shank for inserts beginning with 'L' is: LROE58 Dimensions Includes, Head, Clamp and Hardware '' For Inserts Beginning With 'L' Head Only Includes Clamp and Hardware For Inserts Beginning With 'L' Head Screws Head Wrenches Clamp Clamp Hardware.500" LROE12 RROE12 Right Hand or Left Hand as right hand with right hand inserts; as left hand with left hand inserts; as either hand with centered inserts..625" LROE58 RROE58 1 each: 1 each: LROEH S5806 W1006 S2810 W " LROE34 RROE34 Clamp C Screw: S3808 Wrench: W " LROE01 RROE01 7-7
6 U.S. PTENT NOS. 6,688,816 and 6,824,333 ROUND TERNL TOOLHOLDERS Designed for boring bar positions on all machines. Toolholder reversible for left and right hand orientation. sizes 1/2", 5/8", 3/4" and 1". ll 1/2", 5/8" and 3/4" shanks are made from 1" shank. C 1" SERT Scan this code for itional information. below that represents your selection of shank orientation and dimensions. The for a.625" right hand shank for inserts beginning with 'L' is: LR5806 Right Hand or Left Hand Minimum Bore Diameter Dimensions '' 'C' Includes, Clamp and Hardware For Inserts Beginning With without pin 'L' Clamp Screw Wrench Pin.500" LR " 5.500" LR5806 ROUND TOOLHOLDERS as right hand with left hand inserts; as left hand with right hand inserts; as either hand with centered inserts ".750" LR " LR " " LR0112 Clamp C S3808 W1005 P
KAISER TOOL COMPANY, INC.
U.S. PTENT NOS. 6,688,816 and 6,824,333 S External threading within.070" of a shoulder. Internal ME threading with 1.250" minimum bore diameter. 4 threads per inch and greater. Sub-micron grain DUR-MX
KAISER TOOL COMPANY, INC.
SERTS External grooving. Internal Static O-Ring grooving with 1.250" minimum bore diameter. Sub-micron grain DUR-MX 2000 and 5000 arbides. Inserts available with TiN, Ti, TiN and Diamond coating. Insert
APPLICATION REFERENCE
O.D./I.D. S Insert Shown in Right Hand Toolholder D THINIT LGI093D2.240" +.0 -.0 FRONT RKE: RIDE: Primary 10 honed, Secondary 15 HIGH SPEED STEEL: 15 K LERNE: 2-1/2 both sides SIDE LERNE: 0 both sides
KAISER TOOL COMPANY, INC.
O.D./I.D. THREDING INSERTS D FRONT RKE: 15 RDIUS:.002" or.000" TOP RKE: 0 PROFILE: 60 Insert Shown in Toolholder PRODUT INFORMTION External threading within.046" of a shoulder. Internal threading with
PRODUCT SELECTION GUIDE - TOOLHOLDERS ADAPTERS
PRODUT SELETION GUIDE - TOOLHOLDERS www.thinbit.com/qr7-1 Scan this code for additional information. DPTERS dapters Square and round adapters Use for boring bars and solid carbide tooling THINIT ROUND
APPLICATION REFERENCE
O.D./I.D. GROOVING INSERTS Insert Shown in D THINIT LGI093D2.240" +.0 -.0 FRONT RKE: RIDE: Primary 10 honed, Secondary 15 HIGH SPEED STEEL: 15 K LERNE: 2-1/2 both sides SIDE LERNE: 0 both sides RDIUS:
PRODUCT SELECTION GUIDE - FACE GROOVING
PRODUCT SELECTION GUIDE - FACE GROOVING PAGE 2-3 For internal diameters of.125" and larger Groove widths.004"-.250" Solid carbide shanks in 1/8", 3/16", 1/4", 5/16", 3/8" and 1/2" diameter FACE GROOVING
O.D./I.D. GROOVING AND TURNING INSERTS .145" .240" ORDERING INSTRUCTIONS
O.D./I.D. GROOVING ND TURNING INSERTS FRONT RKE: CRIDE: Primary 10 honed, Secondary 15 HIGH SPEED STEEL: 15 CK CLERNCE: 2-1/2 both sides SIDE CLERNCE:.004" -.019" - 0 both sides.020" -.150" - 5 both sides
Mission Statement. 2005, Manchester Tool Company. All rights reserved.
Mission Statement Manchester Tool Company shall provide tooling systems to the metal cutting and similar industries, specializing in cutoff, grooving and complimentary niche products. We are dedicated
Grooving Threading Parting Boring Turning Face Grooving Custom Tooling Form Tools. thinbit.com
Grooving Threading Parting Boring Turning Face Grooving Custom Tooling Form Tools 2014 thinbit.com SECTION 1: GROOVING PG 1-9 GROOVING AND TURNING.004 THROUGH.150 IN.001 INCREMENTS PG 1-13 1.000 DEPTH
AMERICAN QUALITY AMERICAN VALUE AMERICAN PRIDE
AMERICAN QUALITY AMERICAN VALUE AMERICAN PRIDE FEATURING OVER 48 YEARS OF COMPLETE TOOLING SOLUTIONS FOR GROOVING THREADING PARTING BORING TURNING FACE GROOVING SPECIALS FORM TOOLS MADE IN THE U.S.A. SINCE
SNAP. For more case studies, testimonials, and videos. We are also available on:
www.heuletool.com For more case studies, testimonials, and videos We provide online tool selectors for the COF,, DEF and BSF product groups. Simply enter your application information and the correct tool
Page 1-7 Page º(+) TOP RAKE (SIDE VIEW) APPLICATION REFERENCE PGS 9-10, 9-12, 9-18 & 9-20 ORDERING INSTRUCTIONS
U.S. PATENT N. 5,638,728 PRDUCT INFRMATIN 2, 3, 4, 5 and 6mm insert widths. Recessed pocket and raised edge for chip control. Internal grooving, external grooving, face grooving and parting. Sub-micron
tel fax
distributed by : Newman Tools Inc. Tel 1-800-465-1384 Fax 1-800-605-2442 Tel 613-836-6776 Fax 613-836-9070 www.newmantools.com thread mills - product overview Thread Mills cut a thread using helical interpolation.
DRA DRA. MagicDrill. High Efficiency Modular Drill. Excellent hole accuracy with a low cutting force design. High Efficiency Modular Drill
High Efficiency Modular Drill High Efficiency Modular Drill MagicDrill DRA Excellent hole accuracy with a low cutting force design Optimal web thickness limits deflection Fine chip breaking and smooth
888 THINBIT 888 THINFAX THINBIT.COM
SINCE 1964 888 THINBIT 888 THINFAX THINBIT.COM GROOVING THREADING PARTING BORING TURNING FACE GROOVING CUSTOM TOOLING FORM TOOLING MILL TOOLING 2018 thinbit.com MADE IN THE USA SECTION 1: GROOVING PG 1-9
Indexable Center Drill
i-center indexable center drill (patent pending) First Indexable center drill in the world. Shortens set up time and center drilling time. Increases tool life which reduces tooling cost. Special forms
SINGLE POINT TOOLS. Mini Boring Bars Mini Boring Bars come in a range of diameters from to inch. They are fluted for maximum strength.
SINGLE POINT TOOLS All single point tools are designed for internal machining on a lathe. The helical boring bars can be used for both lathe and mill applications. All cutting tools are made from premium
BSF. Large Ratio Automatic Back Counterboring & Spotfacing Tool
BSF Large Ratio Automatic Back Counterboring & Spotfacing Tool Counterbores up to 2.3xd Replaceable carbide coated blades for extended life Very simple to use Suitable for CNC machines with through coolant
CHAMFERING RINGS UPDATED. Ring Diameters: 1.34, 1.50, 1.65 and Fits Body Diameters: 10.0mm(.3937") mm(1.000")
Ring Diameters: 1.34, 1.50, 1.65 and 1.85 Fits Body Diameters: 10.0mm(.3937") - 25.4mm(1.000") L:D Ratios: Gold Twist 3xD, 5xD, 8xD & 12xD Quad Twist & Quad Drill+ 3xD, 4xD & 5xD Maximum Chamfer DOC:.118"
Optimized flute design Better chip evacuation. Carbide substrate Higher heat resistance, higher speed.
Thread Mills Available for the first time, our solid thread mills are designed to be the highest quality thread milling solution. WIDIA-GTD Cut up to 63 HRC. Improved overall thread quality. Optimized
MACHINING PROCESSES: TURNING AND HOLE MAKING. Dr. Mohammad Abuhaiba 1
MACHINING PROCESSES: TURNING AND HOLE MAKING Dr. Mohammad Abuhaiba 1 HoweWork Assignment Due Wensday 7/7/2010 1. Estimate the machining time required to rough cut a 0.5 m long annealed copper alloy round
External Turning. Outline Review of Turning. Cutters for Turning Centers
Outline Review of Turning External Turning 3 External Turning Parameters Cutting Tools Inserts Toolholders Machining Operations Roughing Finishing General Recommendations Turning Calculations Machining
with better tools from Introducing: Dapra's New Modular Heads Designed to Screw On to Industry Standard Systems
CUTTING Times Vol. 4, Issue 1 with better tools from Dapra Corporation 66 Granby Street, Bloomfield, CT 06002 1-800-243-3344 860-242-8539 Fax 860-242-3017 Email info@dapra.com www.dapra.com Introducing:
Broaching, External External Broach Tool Holders...18 Driven Broach Tool Holder for Multi's External Broaches...19
TABLE OF CONTENTS CATALOG 2017 TITLE PAGE Broaching, Internal Swiss Adjustment Free Broach Tool Holders...8 Swiss Broaching Heads for ER Collet Chucks...7 Adjustable Broach Tool Holders...10 CNC Adj. Free
Metal Drilling. Engineered for Controlled Precision and Speed METAL DRILLING. Tip Geometry. Drill Bit Selection. 135 Split Point
Engineered for Controlled Precision and Speed Shank Diameter Shank Point Angle Drill Bit Diameter : Point Angle: Drill Diameter: Shank : : Tip Geometry 118 Conventional Point 118 Point Angle 135 Split
MILLING OF T-SLOTS. Excellent removal of chips, flushed by through coolant supply. In the UNITED STATES call us toll free HORN
MILLIN OF T-SLOTS Excellent removal of chips, flushed by through coolant supply. 1 MILLIN OF T-SLOTS MILLIN SHANK MU311.669 Material of shank: Carbide - iving a good vibration resistance for use with Insert
Facing and Boring Heads UPA
Facing and Boring Heads UPA Universal Facing and Boring Heads For use on universal milling and boring machines, jig borers etc. suitable for all types of work in single or series production. Product range
New Standard Line for Heavy Duty Applications with Extra Large Pitches up to 24mm or 1tpi
www.vargus.com For Extra Large Pitches New Standard Line for Heavy Duty Applications with Extra Large Pitches up to 24mm or 1tpi Offering a wide range of profiles for internal and external applications:
TRAINING MANUAL. Part 3 REAMERS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 3 REAMERS 1 Purpose of Reamers REAMERS A reamer produces an accurate and highly finished round hole to a much finer tolerance than that produced by a drill.
Broaching, External External Broach Tool Holders...18 Driven Broach Tool Holder for Multi's External Broaches...19
TABLE OF CONTENTS CATALOG 2017 TITLE PAGE Broaching, Internal Swiss Adjustment Free Broach Tool Holders...8 Swiss Broaching Heads for ER Collet Chucks...7 Adjustable Broach Tool Holders...10 CNC Adj. Free
Technical T-A & GEN2 T-A GEN3SYS APX. Revolution & Core Drill. ASC 320 Solid Carbide. AccuPort 432. Page CONTENTS. Set-up Instructions 256
Technical ASC 0 Solid Carbide CONTENTS Page Set-up Instructions 6 AccuPort 4 Recommended Speeds & Feeds 60 Guaranteed Application Request Form 99 +44 (0)84 400 900 +44 (0)84 400 0 enquiries@alliedmaxcut.com
Lathe Accessories. Work-holding, -supporting, and driving devices
46-1 Lathe Accessories Divided into two categories Work-holding, -supporting, and driving devices Lathe centers, chucks, faceplates Mandrels, steady and follower rests Lathe dogs, drive plates Cutting-tool-holding
Everything for metal Machining Under one Roof M I R C O N A
IUT 0058E Everything for metal Machining Under one Roof M I R C O N A MIRCONA is a Swedish company with its head office situated in the town of Gävle, Sweden. The main activity of the company since it
Plus Our NEW Quick Delivery Step Drill Program
LE ADING SOLUTIONS FOR CHAMFERED / THRE ADED HOLES Plus Our Quick Delivery Step Drill Program CHAMFERED / THREADED HOLE SOLUTIONS From standard stocked tools to our Quick Delivery Program a full range
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
ARNO (UK) Limited We have a passion for precision. Holder 1 see page 3. Holder 35. Holders 70 see page 4. see page 5. Save Over 30% see page 8-10
Promotions - 2017 ARNO (UK) Limited NC - Grooving System The flexible solution for both axial and radial grooving SA Part-Off System With or without through tool coolant see page 2 Holder 1 see page 3
I 640 West. c Offi. pany Phone. c ~ g CHICAGO 6. Ill. M h:tjryant OMPOUND RING BAR SUPPORT. GilBERT C DEarbom ~.
ll / - M h:tjryant c Offi I 640 West g CHICAGO 6. Ill pany Phone. c ~ GilBERT C DEarbom 2-5566 ~. OMPOUND TIL~:~ BORING, ~~: F:o~~:YH~~~ DRILLING ':~~~N~:E~~7:NE RECTANGULAR TAB ~~~;:E~:~z:T~~L TABLEe
STI-SCREW THREAD INSERT TAP OPTIONS
-SCREW THREAD INSERT TAP OPTIONS EXPANDED OFFERING SCREW THREAD INSERT TECHNOLOGY PREVENT STRIPPING on Safety Critical Threading Applications with. Screw Thread Insert Tapping Options EMUGE (Screw Thread
HC Hydraulic Expansion Chucks
Technical Information HC Hydraulic Expansion Chucks design, function, effect, and application features, handling, and action application instructions precision tool length setting torques accessories sealed
Stable parting-off operations due to unique clamping system
GrooveLine Tungaloy Report No. 504-US DUOJUST-CUT Stable parting-off operations due to unique clamping system ACCELERATED MACHINING GrooveLine DuoJust-Cut, a new line of small tools with a durable insert
ACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through
Chapter 23: Machining Processes: Hole Making Part A (Lathe Operations, Boring, Reaming, Tapping)
1 Manufacturing Processes (2), IE-352 Ahmed M El-Sherbeeny, PhD Spring 2017 Manufacturing Engineering Technology in SI Units, 6 th Edition Chapter 23: Machining Processes: Hole Making Part A (Lathe Operations,
Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes
MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing
INSTRUCTIONS FOR USE B2 FORM KNURLING TOOL
INSTRUCTIONS FOR USE B2 FORM KNURLING TOOL Contents CONTENTS 1. General... 2 1.1 Introduction... 2 1.2 Tool Construction... 3 2. B2 Tools... 6 2.1 Technical Data... 6 2.2 Overview: Main components... 7
Flexible tool overhang lengths possible by combining the modular extension arbor and shank with insert run-out adjustment mechanism
Sumi Easy insert replacement Characteristics Achieves efficiency through high speed, high feeding ability!! (v c =50 to 500m/min, f = 0.4 to 1.2mm/rev) Compatibility with a wide range of cutting conditions
Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY
TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form
New. Products2013.
T u n g a l o y www.tungaloy.com Company Overview Providing Complete Tooling Solutions for the Metal Removal and Industrial Product Sectors TUNGALOY is one of the world s leading manufacturers of carbide
Turning and Lathe Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of lathe principles and be able to identify the basic tools and techniques
Tiny Tools New Products
Tiny Tools ew roducts Inch 2016-17 Tiny Tools CR Carmex ulti-task Tiny Tools Carmex is introducing a new and innovative ulti-task Tiny Tool CR for Boring, Turning, Facing and Chamfering with a single tool.
SPOTLIGHT 2018 METRIC
SPOTLIGHT 2018 METRIC Advanced Threading Solutions Innovative Grooving & Turning Solutions www.vargus.com Thread Turning External Toolholders with Coolant Thru Precise coolant thru, designed to efficiently
KEO Cutters a name you can trust!
KEO utters a name you can trust! The world of cutting tools is changing every day. KEO utters is getting better every day as we implement and execute our continuous improvement strategies. This new catalog
INDEXABLE BORING BAR AND INSERTS FLAT TOP, CHIP CONTROL, CBN, AND PCD
INDEXABLE BORING BAR AND S FLAT TOP, CHIP CONTROL,, AND 80 Diamond.156 IC R.156.040 80 DIAMOND FLAT TOP 80 DIAMOND CHIP CONTROL AT6+ 0.003 ACD5031 ACD5031E AT6+ 0.007 ACD5071 ACD5071E AT6+ 0.015 ACD5151
Toolpost for HBM 290 lathe
Toolpost for HBM 290 lathe When I bought a new lathe it came with just a square toolpost so I had to use shims to get the tool to correct height. I decided to make a simple toolpost with tool-holders with
INSTRUCTIONS FOR USE LA, MAMMUT & STR KNURLING TOOLS
INSTRUCTIONS FOR USE LA, MAMMUT & STR KNURLING TOOLS Contents CONTENTS 1. General... 2 1.1 Introduction... 2 1.2 Tool Construction... 3 2. LA-Tool... 5 2.1 Technical Data... 5 2.2 Overview: Main Components...
NO NEED TO CHOOSE NINE9 DOES IT ALL!
NO NEED TO CHOOSE NINE9 DOES IT ALL! Cat. No. 11.a NC Spot Drills Corner Rounding Cutters & Engraving Tools Various applications of NC Spot Drill We Focus: Higher efficiency Position accuracy Long tool
Spotlight
Spotlight 2010 www.vargus.com Specials Advanced Tailor Made Solutions Inserts Solid Carbide Toolholders Mega Line Special Solution for Extra Large Pitches (up to 24mm) Designed to be extra tough, use the
COFA. Deburring Tool for Elliptical or Contoured Surfaces. increased performance. from stock
Deburring Tool for Elliptical or Contoured Surfaces increased performance from stock Cat. No. HTC015 Introduction Catalog HTC015No. HTC14 The HEULE COFA deburring tool removes burrs from the front and
NC Spot Drill with Patented indexable carbide insert.
with Patented indexable carbide insert. High Efficiency! Low Cost! CNC Lathes, CNC Turning Centers and Machining Centers. One tool will perform multiple applications. Long tool life. Each insert has four
mila-wall (Series100) General Operating Instructions page 1 of 15
mila-wall (Series100) General Operating Instructions page 1 of 15 Step #1: Before setting up walls, lower adjustable leveling feet on each panel approximately 1". This will allow access to the threaded
INSTRUCTIONS FOR USE A1 & A2 KNURLING TOOLS
INSTRUCTIONS FOR USE A1 & A2 KNURLING TOOLS Contents CONTENTS 1. General... 2 1.1 Introduction... 2 1.2 Tool Construction... 3 2. A1-Tools... 5 2.1 Technical Data... 5 2.2 Overview: Main Components...
Product Overview. for perfect connections
Product Overview for perfect connections TOOL HOLDERS FOR DRILLING, TAPPING & REAMING Smart solutions for high quality clamping systems in tapping applications Tapping solution range from M1 M200 Quick
PARTING ISCAR PARTING USER GUIDE. Parting and Grooving. Insert Positioning
90 80 0 70 10 60 20 50 30 40 Parting and Grooving Selection of Inserts For a proper match of insert and cutting material to application, the following variables must be taken into consideration: Width
BNBX Type BNBX L103. Small Hole Boring Bars SUMIBORON
Small ole BNBX Type BNBX Boring & Facing Brazed 3 Newly developed high rigidity slit-clamping system, excellent for small hole boring Maximum overhang of /D=5 possible. Minimal bar deformation produces
SPX Offers low cutting resistance for heavy machining & deep shoulder milling
Shell type ddition! 010. Updte B111G Indexble End ill for Deep Shoulder illing Offers low cutting resistnce for hevy mchining & deep shoulder milling y Wvy cutting edge geometry breker breks the chips
DRV Magic Drill. High Efficiency Indexable Drill. Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation
DRV Magic Drill High Efficiency Indexable Drill Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation xd to 6xD drilling lineup with 4 chipbreakers for various machining applications High
STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK
STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MECH 121 - MANUFACTURING PROCESSES I Prepared By: Daniel Miller Updated By: Daniel Miller (April 2015) CANINO SCHOOL OF
A very warm welcome (Arial, 24-point bold font) Discover what's under the surface (Arial, 20-point bold font in italics)
A very warm welcome (Arial, 24-point bold font) Discover what's under the surface (Arial, 20-point bold font in italics) HORN Technology Days 2015 Longitudinal turning Flexibly producing complex turned
Change!! Change I Change II Change III Change IV. Magic Drill DRX DRX
Drilling DRX Magic Drill DRX Magic Drill DRX Change!! The total product lineup is now complete! ø1~ø60 D,3D,4D,5D Change I Change II Change III Change IV New Technology: Twisted coolant hole New Concept:
-treme thread cutting. Tiny Tools. New Products. Metric
TM -treme thread cutting Tiny Tools New Products Metric 2014-2015 Tiny Tools Broaching Tools for Hexagon Keys - HK The HK broaching system have been developed to machine internal keyways inside blind or
Lower Spindle Power Consumptionn
ower Spindle Power Consumptionn > Five cutters for drilling Ø13~Ø50 mm. > One insert for all kind of materials. > The drilling is done by helical interpolation. (circular ramping milling) Nine9 NC Helix
How to choose your turning tool
GNRAL TURNING General Turning GNRAL TURNING How to choose your turning tool How to choose your turning tool 1 Overview of tooling alternatives Choose Coromant Capto or shank tool, depending on clamping
Making toolholders for a Sieg type Quick Change Toolpost
Making toolholders for a Sieg type Quick Change Toolpost A friend got me a good deal on a Quick Change Toolpost for the Sieg C6 lathe, I only needed to turn the recess at the bottom of the block out to
Broaching, External External Broach Tool Holders...18 Driven Broach Tool Holder for Multi's External Broaches...19
TABLE OF CONTENTS CATALOG 2017 TITLE PAGE Broaching, Internal Swiss Adjustment Free Broach Tool Holders...8 Swiss Broaching Heads for ER Collet Chucks...7 Adjustable Broach Tool Holders...10 CNC Adj. Free
Innovative insert provides superior
TurnLine Tungaloy Report No. 417-US MINIFORCE-TURN Innovative insert provides superior economic advantages! ACCELERATED MACHINING TurnLine VXGU insert, new toolholders, new chipbreaker, and new grades
and AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems
and AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems Allied Maxcut Engineering Co. Limited AMEC Indexable Drill Range The AMEC range of adjustable indexable carbide drills provides the
Carbide Reamers...P18. Ejector Pin Counter Bores...P17
P1 Carbide Reamers...P18 Ejector Pin Counter Bores...P17 Extended Reach 2 Flute End Mills (For Machining Aluminum) Ball Nose...P15 Square End...P16 Extended Reach 4 Flute Coated End Mills Ball Nose...P11
AUTOMATED MACHINE TOOLS & CUTTING TOOLS
CAD/CAM COURSE TOPIC OF DISCUSSION AUTOMATED MACHINE TOOLS & CUTTING TOOLS 1 CNC systems are used in a number of manufacturing processes including machining, forming, and fabrication Forming & fabrication
NEW RÄNDELFRÄSWERKZEUGE KNURLINGTOOLS
NEW RÄNDELFRÄSWERKZEUGE KNURLINGTOOLS KNURLING TOOLS Swarovski Optik KG Swarovskistraße 70 A-6067 Absam Fon +43 (0)5223 511-0 Fax +43 (0)5223 511-6550 info@quick-tools.at www.quick-tools.at Milled knurls
Value-Added Programs. Refurbishment Service. Refurbishment Delivery Service. Just In Time Inventory Programs. Commodity Management
Value-Added Programs ClappDiCO offers a number of value-added programs that reduces our customers manufacturing costs on a per unit basis. Refurbishment Service A complete refurbishment service to restore
Thread Mills. Solid Carbide Thread Milling Cutters
Thread Mills Solid Carbide Thread Milling Cutters Thread milling cutters by Features and Benefits: Sub-micro grain carbide substrate Longer tool life with tighter tolerances More cost-effective than indexable
Hertel Indexable Drills (HID)
Hertel Indexable Drills (HID) mscdirect.com/hertel DESIGNED TO DELIVER Hertel cutting tools are designed to deliver consistency, reliability, durability and value with every cut. For over 65 years, Hertel
Grade/Chip breaker. Contents. Grades. Chip breakers A02 A03 A04. Korloy grades system Grade selection system The feature of korloy grades A06 A08 A09
Grade/Chip breaker Contents Korloy grades system Grade selection system The feature of korloy grades A02 A03 A04 For For For A06 A08 A09 >>> /Chipbreakers Korloy grades system Uncoated P For steel ST05
Internal Rotary/Punch Broaches & Plugs Adjustable & Non Adjustable Rotary Holders
CAT_BROOTSEN_2008-08_EN_hassay savage_fabrieks-catalogus AMTC BV - importeur Nederland pagina 14 van 40 uscatalogv7.qxp 8/13/2008 10:57 AM Page 14 Internal Rotary/Punch Broaches & Plugs Adjustable & Non
Premium Power Tool Accessories Proudly Made in the USA
Premium Power Tool Accessories Proudly Made Table of Contents Make it Snappy Tools Premium Power Tool Accessories Proudly Made About Us Founded in a basement machine shop in Minnesota in 1962, we are a
Price List - End Mills MC 45
Price List - End Mills MC 45 (With effect from 7th December 2018) Addison & Co Ltd., established in 1873, is India s largest manufacturer of HSS Cutting Tools. The Company s current product range: I. HSS
ROOP LAL Unit-6 (Milling) Mechanical Engineering Department
Notes: Milling Basic Mechanical Engineering (Part B, Unit - I) 1 Introduction: Milling is a machining process which is performed with a rotary cutter with several cutting edges arranged on the periphery
T360. Holders and Inserts - T-Cap. Features T333. Holders T335. Inserts T336. Clamping units T337. Sleeves for clamping units T338.
T358 T329 Holders and Inserts - T-Cap Features Holders Inserts Clamping units Sleeves for clamping units T-CAP Kits T333 T335 T336 T337 T338 T339 User Guide Comparison test results Surface finish Tool
Aircraft Quality Reamers and Special Tooling
C A T A L O G 2 6 www.reamers.com Aircraft Quality Reamers and Special Tooling Manufactured in the USA since 1881 AIRCRAFT QUALITY REAMERS AND SPECIAL TOOLING P R O V E N P R E C I S I O N Since 1881,
no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
TABLE OF CONTENTS. Automotive Brake Lathe Carbide Bits Carbide Insert Toolholders Automotive Machine Shop Cutting Tools...
TABLE OF CONTENTS Table of Contents...1 Automotive Brake Lathe Carbide Bits...2 7 Boring Bar Inserts....8 Carbide Insert Toolholders.... 9 12 Automotive Machine Shop Cutting Tools... 13 14 Silencer Bands,
+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need
Reaming. Tool Systems
Milling Thread Milling Trapezoid thread ACME thread Knuckle thread TC 50 / TC 80 18-79 1 Face Finish Milling 80-85 2 Notch Impact Test 86-91 3 Gear Milling 92-95 4 Slot Milling 96-123 5 Contour and Radius
Valid from. MARcH 1 - AUGUST 31,
Valid from MARcH 1 - AUGUST 31, 2014 www.tungaloyamerica.com 1 Choices: Shellmill Type Holder 1) Buy 20 inserts, receive 1 shellmill at 25% off 2) Buy 30 inserts, receive 1 shellmill at 50% off 3) Buy
XMR01 XMR01. Indexable Milling Tools. High feed milling cutters B 119. Specification of tools XMR01 XMR01. S type insert, straight shank.
Tools S type insert, straight shank Specification of tools Stock ØD L1 L ød Number of teeth Z asic dimensions(mm) Weight (kg) 0 1 0. -0-G-SD09-0 1-0-G-SD09-0 1-0-G-SD1-0 1-0-G-SD1-0 1 1. Stock available
B-Too Drilling and Tapping Machine Instruction and Maintenance Manual
B-Too Drilling and Tapping Machine Instruction and Maintenance Manual Thank you for your purchase of the B-Too Drilling and Tapping Machine. Please read and understand this short operation manual. Our
Fubri supply optimum solutions with the greatest expertise all type of tools for gear cutting
Fubri supply optimum solutions with the greatest expertise all type of tools for gear cutting Company Over 50 years of experiences 25 years in gear cutting industry Since 5 years provide complete package
Shrink Fit System... Thermal Induction
Shrink Fit System... Thermal Induction process-controlled heating no overheating on the tool quick and accurate shrinking, on and off for tools with carbide or steel shanks slim design of the chucks through
THE PROBLEM OF TOOL SELECTION FOR MILLING LARGE INTERNAL THREADS
THE PROBLEM OF TOOL SELECTION FOR MILLING LARGE INTERNAL THREADS Mladen Bošnjaković Dragomir Moškun Marko Jerković M.Sc. Mladen Bošnjaković, Slavonski Brod University of Applied Science, Dr. M. Budaka
Guide Pulley System [GPS]
![Guide Pulley System [GPS]](/thumbs/86/93494578.jpg "Guide Pulley System [GPS]")
Guide Pulley System [GPS] The purpose of the guide pulley system is to guide the wire from the dancer pulley system to the guide rollers. Two of these systems exist: on both sides of the machine. The pulley