Features. = +25 C, Vdd 1, 2, 3 = +3V
|
|
- Eugene Owen
- 5 years ago
- Views:
Transcription
1 v.11 HMC6LC AMPLIFIER, 6-2 GHz Typical Applications The HMC6LC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military & Space Functional Diagram Features Noise Figure: 2. db Gain: 21 db OIP3: 2 dbm Single Supply: 3 ma Ohm Matched Input/Output RoHS Compliant x mm Package General Description The HMC6LC is a high dynamic range GaAs phemt MMIC Low Noise Amplifier housed in a leadless RoHS compliant xmm SMT package. Operating from 6 to 2 GHz, the HMC6LC features 21 db of small signal gain, 2. db noise figure and IP3 of +2 dbm across the operating band. This self-biased LNA is ideal for microwave radios due to its single +3V supply operation, and DC blocked RF I/O s. Electrical Specifications, T A = +2 C, Vdd 1, 2, 3 = +3V Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range GHz Gain db Gain Variation Over Temperature db/ C Noise Figure db Input Return Loss 1 12 db Output Return Loss 13 1 db Output Power for 1 db Compression (P1dB) dbm Saturated Output Power (Psat) dbm Output Third Order Intercept (IP3) 2 21 dbm Total Supply Current (Idd)(Vdd = +3V) ma 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA Phone: Order online at Application Support: Phone: 1--ANALOG-D
2 HMC6LC v.11 AMPLIFIER, 6-2 GHz Broadband Gain & Return Loss 3 Gain vs. Temperature 3 RESPONSE (db) S21 S11 S Input Return Loss vs. Temperature RETURN LOSS (db) C GAIN (db) C Output Return Loss vs. Temperature RETURN LOSS (db) C Noise Figure vs. Temperature 1 Output IP3 vs. Temperature 3 2 NOISE FIGURE (db) 6 2 -C IP3 (dbm) C For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA Phone: Order online at Application Support: Phone: 1--ANALOG-D 2
3 HMC6LC v.11 AMPLIFIER, 6-2 GHz P1dB vs. Temperature 2 Psat vs. Temperature 2 P1dB (dbm) Reverse Isolation vs. Temperature ISOLATION (db) C -C Psat (dbm) Power 12 GHz Pout (dbm), GAIN (db), PAE(%) Pout Gain PAE -C INPUT POWER (dbm) 2 Gain, Noise Figure & Power vs. Supply 12 GHz 1 9 GAIN (db), P1dB (dbm) Gain Noise Figure P1dB NOISE FIGURE (db) Vdd (Vdc) 3 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA Phone: Order online at Application Support: Phone: 1--ANALOG-D
4 HMC6LC v.11 AMPLIFIER, 6-2 GHz Absolute Maximum Ratings Typical Supply Current vs. Vdd Drain Bias Voltage (Vdd1, Vdd2, Vdd3) +3. Vdc Vdd (V) Idd (ma) RF Input Power (RFIN)(Vdd = +3. Vdc) Outline Drawing 1 dbm Channel Temperature 17 C Continuous Pdiss (T= C) (derate. mw/ C above C) Thermal Resistance (channel to ground paddle).73 W 119. C/W Storage Temperature -6 to +1 C Operating Temperature - to + C ESD Sensitivity (HBM) PKG-3 PIN 1 INDICATOR SEATING PLANE Class 1A..9 SQ.7 TOP VIEW SIDE VIEW. REF. BSC ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS EXPOSED PAD BOTTOM VIEW 3. REF.1 REF PIN SQ 3..2 MIN FOR PROPER CONNECTION OF THE EXPOSED PAD, REFER TO THE PIN CONFIGURATION AND FUNCTION DESCRIPTIONS SECTION OF THIS DATA SHEET D 32-Terminal Ceramic Leadless Chip Carrier [LCC] (E-32-1) Dimensions shown in millimeters. ORDERING GUIDE Part Number Package Material Lead Finish MSL Rating [1] Package Marking [2] HMC6LC Alumina, White Gold over Nickle MSL3 HMC6LCTR Alumina, White Gold over Nickle MSL3 HMC6LCTR-R Alumina, White Gold over Nickle MSL3 [1] Max peak reflow temperature of 26 C [2] -Digit lot number XXXX H6 XXXX H6 XXXX H6 XXXX For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA Phone: Order online at Application Support: Phone: 1--ANALOG-D
5 HMC6LC v.11 AMPLIFIER, 6-2 GHz Pin Descriptions Pin Number Function Description Interface Schematic 1, 2, 6-19, 23-2, 27, 29, 31, 32 N/C 3,, 2, 22 GND RFIN 21 RFOUT 3, 2, 26 Vdd1, 2, 3 Application Circuit This pin may be connected to RF/DC ground. Performance will not be affected. These pins and package bottom must be connected to RF/DC ground. This pin is AC coupled and matched to Ohms. This pin is AC coupled and matched to Ohms. Power Supply Voltage for the amplifier. External bypass capacitors of 1 pf and 2.2 µf are required. Component Value C1, C2, C3 1 pf C, C, C6 2.2 µf For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA Phone: Order online at Application Support: Phone: 1--ANALOG-D
6 HMC6LC v.11 AMPLIFIER, 6-2 GHz Evaluation PCB List of Materials for Evaluation PCB 1131 [1] The circuit board used in the application should use Item Description J1 - J2 PCB Mount K Connector J3 2 mm DC Header C1 - C3 1 pf Capacitor, 2 Pkg. C - C6 2.2 µf Capacitor, Tantalum U1 HMC6LC Amplifier PCB [2] 191 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 3 RF circuit design techniques. Signal lines should have Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Analog Devices upon request. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA Phone: Order online at Application Support: Phone: 1--ANALOG-D 6
7 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC6LC HMC6LCTR
Features. Gain: 17 db. OIP3: 25 dbm. = +25 C, Vdd 1, 2 = +3V
v.7 HMCLC Typical Applications The HMCLC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military & Space Functional
Features. = +25 C, Vdd1, 2, 3 = 5V, Idd = 250 ma*
v.4 HMC498LC4 Typical Applications Features The HMC498LC4 is ideal for use as a LNA or Driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use
Features = +5V. = +25 C, Vdd 1. = Vdd 2
v7.11 HMC1LC3 POWER AMPLIFIER, - GHz Typical Applications The HMC1LC3 is ideal for use as a medium power amplifier for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO
Features. = +25 C, Vdd = +4V, Idd = 90 ma [2]
v.91 HMCLCB AMPLIFIER, 1-27 GHz Typical Applications This HMCLCB is ideal for: Features Noise Figure: 2.2 db @ 2 GHz Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation
Features. = +25 C, Vdd = 5V
v3.117 HMC1LH5 Typical Applications The HMC1LH5 is a medium PA for: Telecom Infrastructure Military Radio, Radar & ECM Space Systems Test Instrumentation Functional Diagram Features Gain: 5 db Saturated
Features = +5V. = +25 C, Vdd 1. = Vdd 2
v1.11 HMC51LP3 / 51LP3E POWER AMPLIFIER, 5-1 GHz Typical Applications The HMC51LP3(E) is ideal for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO Driver for HMC Mixers
SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER,
v2.617 AMPLIFIER, - 12 GHz Typical Applications The is ideal for use as a power amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated
Features. = +25 C, Vdd= 5V, Vgg2= Open, Idd= 60 ma*
v.7 HMCLH AGC AMPLIFIER, - GHz Typical Applications The HMCLH is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C I Test Instrumentation Fiber Optics Functional Diagram Features
Features. = +25 C, Vdd= 8V, Vgg2= 3V, Idd= 290 ma [1]
Typical Applications The is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features P1dB Output Power: + dbm Gain:
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC32LC Typical Applications
Features. = +25 C, Vdd = +3V
v.117 HMC3LPE Typical Applications Features The HMC3LPE is ideal for: Millimeterwave Point-to-Point Radios LMDS VSAT SATCOM Functional Diagram Low Noise Figure:. db High Gain: db Single Positive Supply:
Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 70 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2.5 db Gain: 13 db P1dB
Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 45 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2. db High Gain: 22 db
HMC659LC5 LINEAR & POWER AMPLIFIERS - SMT. GaAs PHEMT MMIC POWER AMPLIFIER, DC - 15 GHz. Features. Typical Applications. General Description
v.61 Typical Applications The wideband PA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Features P1dB Output Power: +27.5
Features. = +25 C, Vdd = +10 V, Idd = 350 ma
HMC97APME v2.4 POWER AMPLIFIER,.2-22 GHz Typical Applications The HMC97APME is ideal for: Test Instrumentation Military & Space Functional Diagram Features High P1dB Output Power: + dbm High : 14 db High
Features. = +25 C, 50 Ohm system
HMC12ALC4 Typical Applications v7.617 ATTENUATOR, 5-3 GHz Features The HMC12ALC4 is ideal for: Point-to-Point Radio VSAT Radio Test Instrumentation Microwave Sensors Military, ECM & Radar Functional Diagram
Features. = +25 C, Vcc =5V, Vpd = 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max Units
v2.917 Typical Applications Features The is ideal for: Point-to-Point Radios Point-to-Multipoint Radios VSAT LO Driver for HMC Mixers Military EW & ECM Functional Diagram High Output IP3: +28 dbm Single
HMC486LP5 / 486LP5E LINEAR & POWER AMPLIFIERS - SMT. SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 7-9 GHz. Typical Applications.
v2. Typical Applications The HMC486LP5(E) is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated Power: +33 dbm @ 2% PAE Output IP3:
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v1.14 AMPLIFIER, 18-4 GHz Typical
HMC618ALP3E AMPLIFIERS - LOW NOISE - SMT. GaAs SMT phemt LOW NOISE AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram
7 Typical Applications The is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femto Cells Public Safety Radios Functional Diagram v. Electrical Specifications T A = + C, Rbias
Features. Parameter Min Typ. Max Min Typ. Max Min Typ Max Units Frequency Range GHz Gain
Typical Applications The HMC82LP4E is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT & SATCOM Marine Radar Military EW & ECM Functional Diagram Features High Saturated Output Power:
Features. = +25 C, Vdd = +15V, Vgg2 = +9.5V [1], Idq = 500 ma [2]
v3.41 Typical Applications Features The is ideal for: Test Instrumentation Military & Space Fiber optics Functional Diagram P1dB Output Power: + dbm Psat Output Power: + dbm High Gain: db Output IP3: 42
Features. = +25 C, Vcc = 5V, Vpd = 5V. Parameter Min. Typ. Max. Min. Typ. Max. Units
v2.717 MMIC AMPLIFIER, 4 - GHz Typical Applications The is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications Functional
HMC5805ALS6 AMPLIFIERS - LINEAR & POWER - SMT. Typical Applications. Features. Functional Diagram
HMC585ALS6 v2.517 GaAs phemt MMIC.25 WATT POWER AMPLIFIER DC - 4 GHz Typical Applications The HMC585ALS6 is ideal for: Test Instrumentation Microwave Radio & VSAT Military & Space Telecom Infrastructure
Features. = +25 C, Vdd= 8V, Idd= 75 ma*
HMC46LC5 Typical Applications v3.11 AMPLIFIER, DC - 2 GHz Features The HMC46LC5 is ideal for: Noise Figure: 2.5 db @ 1 GHz Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation
Features. = +25 C, Vdd= 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz
Typical Applications The HMC62LP / HMC62LPE Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features
Features. Parameter* Min. Typ. Max. Units Frequency Range GHz Gain 2 5 db. Gain Variation over Temperature
v3.1 HMC59MSGE AMPLIFIER,. -.9 GHz Typical Applications The HMC59MSGE is ideal for: DTV Receivers Multi-Tuner Set Top Boxes PVRs & Home Gateways Functional Diagram Features Single-ended or Balanced Output
Features. = +25 C, VDD = +5 V, 0 dbm Drive Level [1]
Typical Applications Features The HMC196LP3E is suitable for: Point-to-Point & VSAT Radios Test Instrumentation Military & Space Functional Diagram High Output Power: 12 dbm Low Input Power Drive: -2 to
HMC1040LP3CE. Amplifiers - Low Noise - smt. GaAs phemt MMIC LOW NOISE AMPLIFIER, GHz. Features. Typical Applications. General Description
v.112 HMC14LP3CE AMPLIFIER, 24-43. GHz Typical Applications This HMC14LP3BE is ideal for: Point-to-Point Radios Test Instrumentation SatCom Transponders & VSAT Industrial Sensors EW & ECM Subsystems Functional
Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 ma [2]
Typical Applications This is ideal for: Features Low Noise Figure: 1.8 db Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram High Gain: 19 db High
Features. = +25 C, Vs = +5V, Vpd = +5V, Vbias=+5V
v4.1217 HMC49LP4E Typical Applications This amplifier is ideal for use as a power amplifier for 3.3-3.8 GHz applications: WiMAX 82.16 Fixed Wireless Access Wireless Local Loop Functional Diagram Features
HMC997LC4. Variable Gain Amplifier - SMT. VARIABLE GAIN AMPLIFIER GHz. Typical Applications. General Description. Functional Diagram
v2.14 Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar Test Equipment Functional Diagram Features Wide Gain Control Range: 1 db Single
GaAs, phemt, MMIC, Low Noise Amplifier, 0.3 GHz to 20 GHz HMC1049LP5E
ACG ACG ACG FEATURES Low noise figure:. db PdB output power:. dbm PSAT output power: 7. dbm High gain: db Output IP: 9 dbm Supply voltage: VDD = 7 V at 7 ma Ω matched input/output (I/O) -lead, mm mm LFCSP
Features. = +25 C, Vdd = +5V, Idd = 400mA [1]
v.61 Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT Military & Space Features Saturated Output Power:.5 dbm @ 21% PAE High Output IP3: 34.5 dbm High Gain:.5
Features. = +25 C, Vdd = +7V, Idd = 1340 ma [1]
Typical Applications The HMC591LP5 / HMC591LP5E is ideal for use as a power amplifi er for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Space Features Saturated
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.38 POWER AMPLIFIER, 2-2 GHz Typical
OBSOLETE HMC5846LS6 AMPLIFIERS - LINEAR & POWER - SMT. Electrical Specifications, T A. Features. Typical Applications. General Description
v1.414 Typical Applications The HMC846LS6 is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT & SATCOM Military & Space Functional Diagram Electrical Specifications, T A = +2 C Vdd = Vdd1,
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC7LP5E POWER AMPLIFIER,.2
Features. Output Power for 1 db Compression (P1dB) dbm Saturated Output Power (Psat) dbm
v1.314 Typical Applications Features The is ideal for: Test Instrumentation Microwave Radio & VSAT Telecom Infrastructure Military & Space Fiber optics Functional Diagram P1dB Output Power: +27 dbm Psat
Features. = +25 C, Vdd= +12V, Vgg2= +5V, Idd= 400 ma*
Typical Applications The HMC637LP5(E) wideband PA is ideal for: Features P1dB Output Power: +29 dbm Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v1.414 Typical Applications The HMC5846LS6
Features. Gain: 14.5 db. Electrical Specifications [1] [2] = +25 C, Rbias = 825 Ohms for Vdd = 5V, Rbias = 5.76k Ohms for Vdd = 3V
Typical Applications The HMC77ALP3E is ideal for: Fixed Wireless and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Public Safety Radio Access Points Functional Diagram Features Noise Figure:.
Gain Control Range db
v1.112-12 GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems X-Band Radar Test Equipment & Sensors Functional Diagram Features Wide Gain Control
Parameter Min. Typ. Max. Units Frequency Range GHz
v.312 27-31. GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar & VSAT Test Equipment Functional Diagram Features Wide Gain Control
Features. = +25 C, Vdd = 5V, Vgg1 = Vgg2 = Open
v3.117 HMC441LM1 Typical Applications The HMC441LM1 is a medium PA for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT LO Driver for HMC Mixers Military EW & ECM Functional Diagram Vgg1, Vgg2:
Features. = +25 C, Vcc = +5.0V. Vcc = +5V Parameter
Typical Applications Ideal as a Driver & Amplifier for: 2.2-2.7 GHz MMDS 3. GHz Wireless Local Loop - 6 GHz UNII & HiperLAN Functional Diagram Features P1dB Output Power: +14 dbm Output IP3: +27 dbm Gain:
Features. Parameter Frequency (GHz) Min. Typ. Max. Units GHz GHz GHz. Attenuation Range GHz 15.
v.6.5 LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR,. - 33 GHz Typical Applications Features The is ideal for: Fiber Optics & Broadband Telecom Microwave Radio & VSAT Military Radios, Radar & ECM Space Applications
GaAs phemt MMIC Low Noise Amplifier, 0.3 GHz to 20 GHz HMC1049
ACG ACG ACG FEATURES Low noise figure:. db PdB output power:. dbm PSAT output power: 7. dbm High gain: db Output IP: 9 dbm Supply voltage: VDD = 7 V at 7 ma Ω matched input/output (I/O) -lead mm mm SMT
Features OBSOLETE. Saturated Output Power (Psat) dbm Output Third Order Intercept (IP3) dbm Supply Current (Idd) ma
7 Typical Applications The HMC667LP2(E) is ideal for: WiMAX, WiBro & Fixed Wireless SDARS & WLAN Receivers Infrastructure & Repeaters Access Points Telematics & DMB Functional Diagram v2.11 Electrical
Parameter Frequency Min. Typ. Max. Units GHz GHz Attenuation Range GHz 31.5 db
v.37. db LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR,. - 8. GHz Typical Applications Features ATTENUATORS - SMT The HMCALP3E is ideal for: WLAN & Point-to-Multi-Point Fiber Optics & Broadband
HMC6380LC4B. WIDEBAND VCOs - SMT. Electrical Specifications, T A. Typical Applications. Features. General Description. Functional Diagram
Typical Applications Low Noise wideband MMIC VCO is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Satcom Military Radar, EW, & ECM Functional Diagram Features Wide Tuning Bandwidth
HMC694LP4 / 694LP4E. Variable gain amplifiers - ANALOG - smt. GaAs MMIC ANALOG VARIABLE GAIN AMPLIFIER, 6-17 GHz. Typical Applications
v2.1 Typical Applications The HMC694LP4(E) is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM X-Band Radar Test Equipment Features Wide Gain Control Range: 23 db Single Control Voltage
Features
HMC37SC7E v1.1.3-3. GHz Typical Applications The HMC37SC7E is ideal for: Cellular/PCS/3G WCS, mmds & ism Fixed Wireless & WLAN Private Land Mobile Radio Functional Diagram Features Single Supply: Vdd =
Features. DC GHz GHz GHz DC GHz GHz GHz GHz DC - 4 GHz GHz Supply Current (Icq) ma
HMC311ST9 / 311ST9E v.17 MMIC AMPLIFIER, DC - GHz Typical Applications The HMC311ST9(E) is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV & Cable Modem Microwave Radio Functional Diagram Features
Features OBSOLETE. = +25 C, Rbias = 0 Ohm. Bypass Mode Failsafe Mode Parameter
7 Typical Applications The HMC668LP3(E) is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Tower Mounted Amplifiers Test & Measurement Equipment Functional Diagram
Features. Parameter Min Typ. Max Min Typ. Max Min Typ Max Units Frequency Range GHz Gain
Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT & SATCOM Marine Radar Military EW & ECM Functional Diagram Features High Saturated Output Power: dbm @ % PAE
2 GHz to 28 GHz, GaAs phemt MMIC Low Noise Amplifier HMC7950
Data Sheet FEATURES Output power for db compression (PdB): 6 dbm typical Saturated output power (PSAT): 9. dbm typical Gain: db typical Noise figure:. db typical Output third-order intercept (IP3): 6 dbm
GaAs, phemt, MMIC, Single Positive Supply, DC to 7.5 GHz, 1 W Power Amplifier HMC637BPM5E
9 11 13 31 NIC 3 ACG1 29 ACG2 2 NIC 27 NIC 26 NIC GaAs, phemt, MMIC, Single Positive Supply, DC to 7.5 GHz, 1 W Power Amplifier FEATURES P1dB output power: 2 dbm typical Gain:.5 db typical Output IP3:
10 W, GaN Power Amplifier, 2.7 GHz to 3.8 GHz HMC1114
9 13 16 FEATURES High saturated output power (PSAT): 41.5 dbm typical High small signal gain: db typical High power gain for saturated output power:.5 db typical Bandwidth: 2.7 GHz to 3.8 GHz High power
6 GHz to 26 GHz, GaAs MMIC Fundamental Mixer HMC773ALC3B
FEATURES Conversion loss: 9 db typical Local oscillator (LO) to radio frequency (RF) isolation: 37 db typical LO to intermediate frequency (IF) isolation: 37 db typical RF to IF isolation: db typical Input
Features. = +25 C, 50 Ohm system
v6.312 Typical Applications Features The E is ideal for: Point-to-Point Radio VSAT Radio Test Instrumentation Microwave Sensors Military, ECM & Radar Functional Diagram Wide Bandwidth: 5-26.5 GHz Excellent
Features. = +25 C, Vdd 1, 2, 3 = +3V
v3.917 Typical Applications Features The HMC17 is ideal for use as a LNA or Driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military & Space Functional
GaAs, MMIC Fundamental Mixer, 2.5 GHz to 7.0 GHz HMC557A
FEATURES Conversion loss: db LO to RF isolation: db LO to IF isolation: 3 db Input third-order intercept (IP3): 1 dbm Input second-order intercept (IP2): dbm LO port return loss: dbm RF port return loss:
Features. = +25 C, Vdd 1, 2, 3 = +3V
v.91 HMC519 AMPLIFIER, 1-32 GHz Typical Applications The HMC519 is ideal for use as either a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors
Analog Devices Welcomes Hittite Microwave Corporation
Analog Devices Welcomes Hittite Microwave Corporation www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.915 GaAs MMIC 6-BIT DIGITAL Typical Applications The HMC648ALP6E is ideal for:
OBSOLETE. = +25 C, Vdd = Vs= +5V, Vctl= 0/ +5V. Parameter Frequency Min. Typ. Max. Units DC GHz 37. db Gain (Maximum Gain State)
v.1212.5 db LSB GaAs MMIC 6-BIT DIGITAL Typical Applications The is ideal for: IF & RF Applications Cellular/3G Infrastructure WiBro / WiMAX / 4G Microwave Radio & VSAT Test Equipment and Sensors Functional
Features. = +25 C, Vdd1, Vdd2 = +5V
v.11 HMC51 POWER AMPLIFIER, 5-2 GHz Typical Applications Features The HMC51 is ideal for use as a driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors
Features OBSOLETE. = +25 C, as a function of Vdd. Vdd = +3V Vdd = +5V Vdd = +5V Vdd = +5V Parameter
v5.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER,. - 3. GHz Typical Applications Broadband or Narrow Band Applications: Cellular/PCS/3G Fixed Wireless & Telematics Cable Modem Termination Systems
Features. Parameter Min. Typ. Max. Units. Frequency Range 8 12 GHz GHZ. Input Return Loss* GHZ 10 db
v6.316 MMIC 4-BIT DIGITAL Typical Applications The HMC43LC4B is ideal for: EW Receivers Weather & Military Radar Satellite Communications Beamforming Modules Functional Diagram Features Low RMS Phase Error:
Parameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz GHz Attenuation Range DC GHz 31.5 db
Typical Applications The is ideal for: 3G Infrastructure & access points Cellular/3G, LTE & UMB WiMAX, WiBN & Fixed Wireless Test Equipment and Sensors GSM, WCDMA & TD-SCDMA Functional Diagram Features.5
Features. = +25 C, Vdd = +5V, 5 dbm Drive Level
v1.4 Typical Applications The HMC561LP3E are suitable for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Functional Diagram
HMC599ST89 / 599ST89E. Features. The HMC599ST89(E) is ideal for: = +25 C MHz. Gain Variation Over Temperature MHz 0.
HMCST / STE Typical Applications v2.3 GaAs phemt MMIC LNA, Ohm - 1 MHz Features The HMCST(E) is ideal for: High P1 Output Power: +1 m VHF / UHF Antennas HDTV Receivers CMTS Equipment CATV, Cable Modem
Features. = +25 C, With 0/-5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units
Typical Applications The is ideal for: Basestation Infrastructure Fiber Optics & Broadband Telecom Microwave Radio & VSAT Military Radios, Radar, & ECM Test Instrumentation Functional Diagram Features
Features. = +25 C, Vdd = +5V, Rbias = 10 Ohms*
Typical Applications Functional Diagram The HMC36LP3 / HMC36LP3E is ideal for: Cellular/3G Infrastructure Base Stations & Repeaters CDMA, W-CDMA, & TD-SCDMA Private Land Mobile Radio GSM/GPRS & EDGE UHF
Features. = +25 C, Vdd = 7V, Vctl = 1V, Idd = 165mA*
DRIVER, DC - GHz Typical Applications The is ideal for: Gbps NRZ MZ & Low V Π Modulator Driver Gbps RZ Transmission 4 Gbps DQPSK Broadband Gain Block for Test & Measurement Equipment Military & Space Functional
HMC639ST89 / 639ST89E
v3.1 HMC63ST / 63STE AMPLIFIER,.2-4. GHz Typical Applications The HMC63ST(E) is ideal for: Cellular / PCS / 3G WiMAX, WiBro, & Fixed Wireless CATV & Cable Modem Microwave Radio IF and RF Sections Features
HMC662LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 8-30 GHz. Typical Applications. Features. Functional Diagram. General Description
Typical Applications The is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement Functional Diagram Features Wide Input
>10 W, GaN Power Amplifier, 0.01 GHz to 1.1 GHz HMC1099
9 1 11 12 13 14 1 16 32 GND 31 29 28 27 26 FEATURES High saturated output power (PSAT):. dbm typical High small signal gain: 18. db typical High power added efficiency (PAE): 69% typical Instantaneous
HMC326MS8G / 326MS8GE
v9.511 AMPLIFIER, 3. - 4.5 GHz Typical Applications The HMC326MS8G / HMC326MS8GE is ideal for: Microwave Radios Broadband Radio Systems Wireless Local Loop Driver Amplifier Functional Diagram Features
5.5 GHz to 8.6 GHz, GaAs, MMIC, I/Q Upconverter HMC6505A
Data Sheet FEATURES Conversion gain: db typical Sideband rejection: dbc typical Output P1dB compression at maximum gain: dbm typical Output IP3 at maximum gain: dbm typical LO to RF isolation: db typical
Features. = +25 C, With 0/-5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units. DC - 20 GHz 2
Typical Applications The is ideal for: Basestation Infrastructure Fiber Optics & Broadband Telecom Microwave Radio & VSAT Military Radios, Radar, & ECM Test Instrumentation Functional Diagram Features
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.65 HMC455LP3 / 455LP3E Typical
Features. = +25 C, 50 Ohm system. DC - 10GHz DC - 14 Ghz DC - 10 GHz DC - 14 GHz Return Loss DC - 14 GHz 5 10 db
Typical Applications v2.717 Features The is ideal for: Basestation Infrastructure Fiber Optics & Broadband Telecom Microwave Radio & VSAT Military Radios, Radar, & ECM Test Instrumentation Functional Diagram
Features OBSOLETE. Parameter Min. Typ. Max. Units. Frequency Range GHz Insertion Loss 5 7 db. Input Return Loss 16 db
v1.611 Typical Applications The is ideal for: EW Receivers Weather & Military Radar Satellite Communications Beamforming Modules Phase Cancellation Functional Diagram Features Low RMS Phase Error: 1.2
Features. = +25 C, Vdd= +3V. Parameter Min. Typ. Max. Units Frequency Range GHz Gain db
7 Typical Applications The HMC286 / HMC286E is ideal for: BlueTooth Home RF 82.11 WLAN Radios PCMCIA Platforms Functional Diagram v3.41 Features 2.4 GHz LNA Noise Figure: 1.7 db Gain: 19 db Single Supply:
HMC471MS8G / 471MS8GE. Features OBSOLETE. DC GHz GHz GHz GHz GHz
v1.65 Typical Applications The HMC471MSG / HMC471MSGE is a dual RF/IF gain block & LO or PA driver: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment Functional
Features. = +25 C, Vs = +5V. Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range MHz Gain
Typical Applications Functional Diagram The HMC32LP3 / HMC32LP3E is ideal for basestation receivers: GSM, GPRS & EDGE CDMA & W-CDMA Private Land Mobile Radio HMC32LP3 / 32LP3E AMPLIFIER, 00-1000 MHz Features
5.5 GHz to 14 GHz, GaAs MMIC Fundamental Mixer HMC558A. Data Sheet FEATURES FUNCTIONAL BLOCK DIAGRAM APPLICATIONS GENERAL DESCRIPTION
FEATURES Conversion loss: 7.5 db typical at 5.5 GHz to 1 GHz Local oscillator (LO) to radio frequency (RF) isolation: 45 db typical at 5.5 GHz to 1 GHz LO to intermediate frequency (IF) isolation: 45 db
Features. = +25 C, With 0/+5V Control, 50 Ohm System
Typical Applications This switch is suitable for usage in 50-Ohm or 75-Ohm systems: Broadband Fiber Optics Switched Filter Banks Wireless below 8 GHz Functional Diagram Features Broadband Performance:
Features. = +25 C, Vdd = 5V, Idd = 85 ma*
Typical Applications The is an ideal gain block or driver amplifi er for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT Functional Diagram Features Saturated Power: +23 dbm @ 27% PAE Gain: db
Features. = +25 C, Vdd = 7V, Vctl = 1V, Idd = 165mA*
HMC7LC DRIVER, DC - GHz Typical Applications The HMC7LC is ideal for: Gbps NRZ MZ & Low V Π Modulator Driver Gbps RZ Transmission 4 Gbps DQPSK Broadband Gain Block for Test & Measurement Equipment Military
10 GHz to 20 GHz, GaAs, MMIC, Double Balanced Mixer HMC554ALC3B
Data Sheet FEATURES Conversion loss: 8. db LO to RF Isolation: 37 db Input IP3: 2 dbm RoHS compliant, 2.9 mm 2.9 mm, 12-terminal LCC package APPLICATIONS Microwave and very small aperture terminal (VSAT)
= +25 C, With Vee = -5V & Vctl = 0/-5V
v.46.5db LSB GaAs MMIC 6-BIT DIGITAL Typical Applications Features The HMC44AG6 is ideal for: Telecom Infrastructure Military Radios, Radar & ECM Space Applications Test Instrumentation Functional Diagram.5
HMC540SLP3E v db LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, GHz
HMC54SLP3E v.95 LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR,. - 8 GHz Typical Applications Features The HMC54SLP3E is ideal for both RF and IF applications: Cellular Infrastructure Wireless
Features. Parameter Frequency (GHz) Min. Typ. Max. Units GHz GHz GHz. Attenuation Range GHz 15.
v.91.5 db LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR,.1-33 GHz Typical Applications The HMC941LP4 / HMC941LP4E is ideal for: Fiber Optics & Broadband Telecom Microwave Radio & VSAT Military Radios, Radar &
Features. = +25 C, Vs= +8V to +16V
v2.17 Typical Applications The Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Features Electrical Specifications,
Features. = +25 C, IF = 100 MHz, LO = +13 dbm, LSB [1]
v1.6 3.5 - GHz Typical Applications The HMC21BMSGE is ideal for: Base stations, Repeaters & Access Points WiMAX, WiBro & Fixed Wireless Portables & Subscribers PLMR, Public Safety & Telematics Functional
HMC639ST89 / 639ST89E
Typical Applications The HMC39ST9(E) is ideal for: Cellular / PCS / 3G WiMAX, WiBro, & Fixed Wireless CATV & Cable Modem Microwave Radio IF and RF Sections Functional Diagram Electrical Specifications,
HMC662LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 8-30 GHz. Typical Applications. Features. Functional Diagram. General Description
v5.94 HMC66LPE DETECTOR, 8 - GHz Typical Applications The HMC66LPE is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications The is ideal