HMC1040LP3CE. Amplifiers - Low Noise - smt. GaAs phemt MMIC LOW NOISE AMPLIFIER, GHz. Features. Typical Applications. General Description

Transcription

1 v.112 HMC14LP3CE AMPLIFIER, GHz Typical Applications This HMC14LP3BE is ideal for: Point-to-Point Radios Test Instrumentation SatCom Transponders & VSAT Industrial Sensors EW & ECM Subsystems Functional Diagram Features Low Noise Figure: 2.2 db High Gain: 23 db P1dB Output Power: +12 dbm Single Supply: 7 ma Output ip3: +22 dbm Ohm Matched Input/Output 16 Lead 3x3 mm smt Package: 16mm² General Description The HMC14LP3CE is a self-biased GaAs MMIC Low Noise Amplifier housed in a leadless 3x3 mm plastic surface mount package. The amplifier operates between 24 and 43. GHz, delivering 23 db of small signal gain, 2.2 db noise figure, and output IP3 of +22 dbm, while requiring only 7 ma from a +2. V supply. The P1dB output power of +12 dbm enables the LNA to function as a LO driver for many of Hittite s balanced, I/Q and image reject mixers. The HMC14LP3CE features I/Os that are DC blocked and internally matched to Ohms, and is ideal for high capacity microwave radios and VSAT applications. Electrical Specifications, T A = +2 C, Vdd1 = Vdd2 = Vdd3 = +2.V, Idd = 7 ma Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units Frequency Range GHz Gain [1] db Gain Variation over Temperature db / C Noise Figure [1] db Input Return Loss db Output Return Loss db Output Power for 1 db Compression dbm Saturated Output Power (Psat) dbm Output Third Order Intercept (IP3) dbm Supply Current (Idd) (Vdd = 2.V) ma [1] Board loss subtracted out. 1 For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 1824 Inc., One Technology Way, P.O. Box 916, Norwood, MA Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D

2 v.112 HMC14LP3CE AMPLIFIER, GHz Broadband Gain & Return Loss [1] 3 Gain vs. Temperature [1] 3 RESPONSE (db) S21 S11 S Input Return Loss vs. Temperature RETURN LOSS (db) C GAIN (db) C Output Return Loss vs. Temperature RETURN LOSS (db) C Noise Figure vs. Temperature [1] 6 Output IP3 vs. Temperature 3 NOISE FIGURE (db) C IP3 (dbm) C [1] Board loss subtracted out, gain only. For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 1824 Inc., One Technology Way, P.O. Box 916, Norwood, MA Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D 2

3 v.112 HMC14LP3CE AMPLIFIER, GHz P1dB vs. Temperature 17 Psat vs. Temperature 17 P1dB (dbm) C Reverse Isolation vs. Temperature ISOLATION (db) C Psat (dbm) C Power 2 GHz Pout (dbm), GAIN (db), PAE (%) Pout Gain PAE Power 33 GHz 3 Power 42 GHz 3 Pout (dbm), GAIN (db), PAE (%) Pout Gain PAE Pout (dbm), GAIN (db), PAE (%) Pout Gain PAE For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 1824 Inc., One Technology Way, P.O. Box 916, Norwood, MA Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D

4 v.112 HMC14LP3CE AMPLIFIER, GHz Current vs. Input 33 GHz Idd (ma) 8 78 Idd Outline Drawing Absolute Maximum Ratings Drain Bias Voltage +4V RF Input Power + dbm Channel Temperature 17 C Continuous Pdiss (T = 8 C) (derate.46 mw/ C above 8 C) Thermal Resistance (Channel to ground paddle).49 W 183 C/W Storage Temperature -6 to +1 C Operating Temperature -4 to +8 C ESD Sensitivity (HBM) Class, 1 V ELECTROSTATIC sensitive DEVICE OBSERVE HANDLING precautions Package Information NOTES: 1. PACKAGE BODY MATeriAL: low STress INJECTION molded PLASTIC silica AND silicon impregnated. 2. lead AND GROUND PADDLE MATeriAL: Copper AlloY. 3. lead AND GROUND PADDLE plating: 1% MATTE TIN 4. DimeNsioNS ARE IN INCHES [millimeters].. lead spacing TolerANCE is NON-CUMULATIVE. 6. PAD BURR length SHALL BE.1mm MAX. PAD BURR HEIGHT SHALL BE.mm MAX. 7. PACKAGE WARP SHALL NOT EXCEED.mm 8. ALL GROUND leads AND GROUND PADDLE MUST BE soldered TO PCB rf GROUND. 9. refer TO HITTITE AppliCATION NOTE for SUGGESTED PCB LAND PATTERN. Part Number Package Body Material Lead Finish MSL Rating Package Marking [2] [1] H14 HMC14LP3CE RoHS-compliant Low Stress Injection Molded Plastic 1% matte Sn MSL1 XXXX [1] Max peak reflow temperature of 26 C [2] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 1824 Inc., One Technology Way, P.O. Box 916, Norwood, MA Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D 4

5 v.112 HMC14LP3CE AMPLIFIER, GHz Pin Descriptions Pin Number Function Description Interface Schematic 1, 2, 4, 9, 11, 12 GND 3 RFIN -8, 14 N/C 1 RFOUT 13, 1, 16 Vdd3, Vdd2, Vdd1 Application Circuit These pins and package bottom must be connected to RF/DC ground. This pin AC coupled and matched to Ohms The pins are not connected internally; however, all data shown herein was measured with these pins connected to rf/ DC ground externally. This pin AC coupled and matched to Ohms Drain bias voltages for the amplifier. See Application Circuit for required external componnets. Capacitor Value C1 - C3 1 pf C4 - C6 1 nf C7 - C9 4.7 µf For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 1824 Inc., One Technology Way, P.O. Box 916, Norwood, MA Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D

6 v.112 HMC14LP3CE AMPLIFIER, GHz Evaluation PCB List of Material for Evaluation PCB EVAL1-HMC14LP3CE [1] J1-J4 TP-TP8 C1 - C3 C4 - C6 C7 - C9 U1 PCB [2] Item 2.92 mm Connectors Test Points DC Pin Description 1 pf Capacitor, 42 Pkg. 1 nf Capacitor, 42 Pkg. 4.7 µf Capacitor, Tantalum HMC14LP3CE Amplifier Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 43 or Arlon 2FR The circuit board used in this application should use RF circuit design techniques. Signal lines should have Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 1824 Inc., One Technology Way, P.O. Box 916, Norwood, MA Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D 6