Features. Parameter Min Typ. Max Min Typ. Max Min Typ Max Units Frequency Range GHz Gain

Transcription

1 Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT & SATCOM Marine Radar Military EW & ECM Functional Diagram Features High Saturated Output Power: % PAE High Output IP3: 35 dbm High Gain: db High P1dB Output Power: dbm DC Supply: 2 ma Compact Lead 4x4 mm SMT Package: mm 2 General Description The is a GaAs phemt MMIC driver amplifier with an integrated temperature compensated on-chip power detector which operates between 5.5 and GHz. The amplifier provides db of gain, +35 dbm Output IP3, and + dbm of output power at 1 db gain compression, while requiring 2 ma from a +5V supply. The is capable of supplying + dbm of saturated output power with % PAE and is housed in a compact leadless 4x4 mm plastic surface mount package. The is an ideal driver amplifier for a wide range of applications including point-to-point radio from 5.5 to GHz and marine radar at 9 GHz. The may also be used for 6 to GHz EW and ECM applications. Electrical Specifications T A = +25 C, Vdd1 = Vdd2 = Vdd3 = +5V, Idd = +2 ma [1] Parameter Min Typ. Max Min Typ. Max Min Typ Max Units Frequency Range GHz Gain db Gain Variation over temperature db/ C Input Return Loss 7.5 dbm Output Return Loss 17.5 dbm Output Power for 1 db Compression (P1dB) dbm Saturated Output Power (Psat) dbm Output Third Order Intercept (IP3) [2] dbm Supply Current (Idd) ma [1] Adjust Vgg between -2 to 0V to achieve Idd = 2mA typical [2] Measurement taken at Pout / tone = +dbm 1 For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 0 Inc., One Technology Way, P.O. Box 96, Norwood, MA

2 HMC82* PRODUCT PAGE QUICK LINKS Last Content Update: 02/23/17 COMPARABLE PARTS View a parametric search of comparable parts. EVALUATION KITS HMC82LP4 Evaluation Board DOCUMENTATION Application Notes AN-1363: Meeting Biasing Requirements of Externally Biased RF/Microwave Amplifiers with Active Bias Controllers Broadband Biasing of Amplifiers General Application Note MMIC Amplifier Biasing Procedure Application Note Thermal Management for Surface Mount Components General Application Note Data Sheet HMC82 Data Sheet TOOLS AND SIMULATIONS HMC82 S-Parameters REFERENCE MATERIALS Quality Documentation Package/Assembly Qualification Test Report: LP3, LP4, LP5 & LP5G (QTR: -005) Semiconductor Qualification Test Report: PHEMT-F (QTR: ) DESIGN RESOURCES HMC82 Material Declaration PCN-PDN Information Quality And Reliability Symbols and Footprints DISCUSSIONS View all HMC82 EngineerZone Discussions. SAMPLE AND BUY Visit the product page to see pricing options. TECHNICAL SUPPORT Submit a technical question or find your regional support number. DOCUMENT FEEDBACK Submit feedback for this data sheet. This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.

3 Broadband Gain & Return Loss RESPONSE (db) S21 S11 S Input Return Loss vs. Temperature RETURN LOSS (db) Gain vs. Temperature GAIN (db) Output Return Loss vs. Temperature RETURN LOSS (db) P1dB vs. Temperature P1dB (dbm) P1dB vs. Supply Voltage P1dB (dbm) 4V 4.5V 5V For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 0 Inc., One Technology Way, P.O. Box 96, Norwood, MA

4 Psat vs. Temperature Psat vs. Supply Voltage Psat (dbm) P1dB vs. Supply Current P1dB (dbm) 0 ma 2 ma 250 ma Psat (dbm) 4V 4.5V 5V Psat vs. Supply Current Psat (dbm) 0 ma 2 ma 250 ma Output IP3 vs. Temperature [1] Output IP3 vs. Supply Current [1] IP3 (dbm) IP3 (dbm) ma 2 ma 250 ma [1] Pout/Tone = + dbm 3 For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 0 Inc., One Technology Way, P.O. Box 96, Norwood, MA

5 Output IP3 vs. Supply Voltage [1] Output Vdd = +4V IP3 (dbm) V 4.5V 5V Output Vdd = +4.5V Output Vdd = +5V IM3 (dbc) GHz 9 GHz Pout/TONE (dbm) GHz 15 GHz 17 GHz IM3 (dbc) IM3 (dbc) GHz 9 GHz Pout/TONE (dbm) GHz 15 GHz 17 GHz GHz 9 GHz Pout/TONE (dbm) GHz 15 GHz 17 GHz Power GHz 500 Gain & Power vs. Supply Current Pout(dBm), GAIN(dB), PAE(%) Idd (ma) Gain (db), P1dB (dbm), Psat (dbm) INPUT POWER (dbm) Pout Gain PAE Idd (ma) GAIN P1dB Psat Idd [1] Pout/Tone = + dbm For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 0 Inc., One Technology Way, P.O. Box 96, Norwood, MA

6 Gain & Power vs. Supply Voltage Reverse Isolation vs. Temperature - Gain (db), P1dB (dbm), Psat (dbm) Power Dissipation POWER DISSIPATION (W) Vdd (V) GAIN P1dB Psat GHz GHz INPUT POWER (dbm) GHz GHz 17 GHz ISOLATION (db) Detector Voltage vs. 6 GHz Vref-Vdet (V) OUTPUT POWER (dbm) +25 C +85 C - C Detector Voltage vs. GHz Detector Voltage vs. GHz 1 1 Vref-Vdet (V) Vref-Vdet (V) OUTPUT POWER (dbm) +25 C +85 C - C OUTPUT POWER (dbm) +25 C +85 C - C 5 For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 0 Inc., One Technology Way, P.O. Box 96, Norwood, MA

7 Absolute Maximum Ratings Typical Supply Current vs. Vdd Drain Bias Voltage (Vdd) 5.5V RF Input Power (RFIN) dbm Channel Temperature 175 C Continuous Pdiss (T=85 C) (derate mw/ C 1.81W Thermal Resistance (R TH ) (junction to ground paddle) 49.8 C/W Operating Temperature - C to +85 C Storage Temperature -65 C to 150 C ESD Sensitivity (HBM) Class 0, Passed 0V Outline Drawing Vdd (V) Idd (ma) Adjust Vgg1 to achieve Idd = 2mA ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Package Information NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN. Part Number Package Body Material Lead Finish MSL Rating [2] Package Marking [1] RoHS-compliant Low Stress Injection Molded Plastic 0% matte Sn MSL1 [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 0 C H82 XXXX For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 0 Inc., One Technology Way, P.O. Box 96, Norwood, MA

8 Pin Descriptions Pin Number Function Description Pin Schematic 1, 2, 5, 6, 7, 8,, 13,, 17,, 19, 21, 23 N/C These pins are not connected internally, however all data shown herein was measured with these pins connected to RF/DC ground externally. 3 RF IN This pin is DC coupled and matched to 50 Ohms. 4, 15 GND 9 Vgg 11 Vref Vdet These pins and package bottom must be connected to RF/DC ground. Gate control for amplifier. External bypass capacitors of 00pF, 0pF and 2.2uF are required. DC bias of diode biased through external resistor used for temperature compensation of Vdet. See application circuit. DC voltage representing RF output power rectified by diode which is biased through an external resistor. See application circuit. RF OUT This pin is DC coupled and matched to 50 Ohms.,, Vdd1, Vdd2, Vdd3 Drain bias voltage for amplifier. External bypass capacitors of 00pF, 0pF and 2.2uF are required. 7 For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 0 Inc., One Technology Way, P.O. Box 96, Norwood, MA

9 Application Circuit For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 0 Inc., One Technology Way, P.O. Box 96, Norwood, MA

10 Evaluation PCB List of Materials for Evaluation PCB EV1HMC82LP4 [1] Item Description J1, J2 PCB Mount SMA RF Connector J5 - J C1 - C4 C5 - C8 C9 - C DC Pin 0pF Capacitor, 02 Pkg. 00pF Capacitor, 02 Pkg 2.2uF Capacitor, 02 Pkg. R1, R2.2k Ohm Resistor, 02 Pkg. U1 PCB [2] Evaluation Board [1] Reference this number when ordering Complete Evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25FR The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. 9 For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 0 Inc., One Technology Way, P.O. Box 96, Norwood, MA

11 Notes: For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 0 Inc., One Technology Way, P.O. Box 96, Norwood, MA