HMC705LP4 / HMC705LP4E

Transcription

1 HMC75LP4 / HMC75LP4E v4.212 Typical Applications Features The HMC75LP4(E) is ideal for: Satellite Communication Systems Point-to-Point Radios Military Applications Sonet Clock Generation Test Equipment Functional Diagram Ultra Low ssb Phase Noise Floor: khz Programmable Divider (N= 1-17) Operating up to 6.5 GHz 24 Lead 4X4mm SMT Package: 16mm 2 General Description Electrical Specifications, T A = +25 C, Vcc = Vcc1 = Vcc2 = +5V The HMC75LP4(E) is a low noise GaAs HBT programmable divider in a 4x4 mm leadless surface mount package. The divider can be programmed to divide by any number from N = 1 to N = 17 up to 6.5 GHz. The HMC75LP4E s high frequency operation along with low phase noise floor is very useful in high performance fast settling synthesizer architectures. The HMC75LP4E may be combined with Hittite s Phase Frequency Detectors, vcos and PLL ics to create low noise, fast settling phase locked loops. Parameter Conditions Min. Typ. Max. Units Maximum Input Frequency Sine Wave or Square Wave Input 6.5 GHz Minimum Input Frequency Sine Wave or Square Wave Input.1 GHz Input Power Range Fin =.1 to 6.5 GHz* dbm Output Power Divide-by-2 dbm SSB Phase Noise Fin = 6 GHz, N = dbc/hz Total Supply Current 19 ma * For sine wave inputs less than 4 MHz input power must be greater than or equal to -5 dbm 1 For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 1824Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 916, Norwood, MA Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D

2 HMC75* PRODUCT PAGE QUICK LINKS Last Content Update: 2/23/217 COMPARABLE PARTS View a parametric search of comparable parts. EVALUATION KITS HMC75LP4 Evaluation Board DOCUMENTATION Data Sheet HMC75 Data Sheet REFERENCE MATERIALS Quality Documentation Package/Assembly Qualification Test Report: LP4, LP4B, LP4C, LP4K (QTR: REV: 4) Semiconductor Qualification Test Report: GaAs HBT-A (QTR: ) DESIGN RESOURCES HMC75 Material Declaration PCN-PDN Information Quality And Reliability Symbols and Footprints DISCUSSIONS View all HMC75 EngineerZone Discussions. SAMPLE AND BUY Visit the product page to see pricing options. TECHNICAL SUPPORT Submit a technical question or find your regional support number. DOCUMENT FEEDBACK Submit feedback for this data sheet. This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.

3 HMC75LP4 / HMC75LP4E v4.212 Input Sensitivity Window, All States 2 Input Sensitivity Window vs. Temperature, N = 17, T = -4 C to +85 C 2 INPUT POWER (dbm) N= Output Power, Divide Ratio States 1 through N=4 N=5 N=3 N= N=2 Output Power, Divide Ratio States 6 through 17 Fundamental Feedthru Power, Pin = dbm -15 N=4 through 17 INPUT POWER (dbm) N=6 N=7 N=8 N=9 N=1 N=11 N=12 N=13 N=14 N=15 N=16 N= OUTPUT LEVEL (dbm) N=2 N= For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 1824Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 916, Norwood, MA Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D 2

4 HMC75LP4 / HMC75LP4E v4.212 SSB Phase Noise Performance Fin = 6 GHz, N = 2; T = -4 C, +25 C, +85 C -11 SSB Phase Noise Performance Fin = 6 GHz, N = 17; T = -4 C, +25 C, +85 C -11 SSB PHASE NOISE (dbc/hz) SSB Phase Noise Performance Fin = 6 GHz, N = 2; Vcc = 4.75V, 5V, 5.25V SSB PHASE NOISE (dbc/hz) SSB Phase Noise Performance Fin = 6 GHz, N = 17; Vcc = 4.75V, 5V, 5.25V nd Harmonic, N = 1 through 5 2nd Harmonic, N = 6 through 17 N=3-4C OFFSET FREQUENCY (Hz) OFFSET FREQUENCY (Hz) SSB PHASE NOISE (dbc/hz) SSB PHASE NOISE (dbc/hz) C OFFSET FREQUENCY (Hz) OFFSET FREQUENCY (Hz) N=5 N=4 N=2 N= For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 1824Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 916, Norwood, MA Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D

5 HMC75LP4 / HMC75LP4E v rd Harmonic, N = 1 through 5 3rd Harmonic, N = 6 through 17 4th Harmonic, N = 1 through 5 4th Harmonic, N = 6 through 17-1 N=4 N=5 N=2-2 N= N= N=5-2 N=3 N= N=2 N= th Harmonic, N = 1 through 5 5th Harmonic, N = 6 through 17 N=6 through15 N=6,7,8,9,1,11,12,13,14,15,16, N= N=6 through N=7 N= N=5 N=2 N=4 N=1 N= N=16 N= For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 1824Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 916, Norwood, MA Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D 4

6 HMC75LP4 / HMC75LP4E v4.212 Output Voltage Waveform, Fin = 5 MHz, N = 2, Pin = dbm, T= 25 C 3 Output Voltage Waveform, Fin = 75 MHz, N = 3, Pin = dbm, T= 25 C 4 AMPLITUDE (mv) Output Voltage Waveform, Fin = 25 MHz, N = 1, Pin = dbm, T= 25 C AMPLITUDE (mv) TIME (ns) TIME (ns) N Output Duty Cycle (%) 1 Input [ 1 - (2/N) ] x 1 AMPLITUDE (mv) TIME (ns) Output Voltage Waveform, Fin = 425 MHz, N = 17, Pin = dbm, T= 25 C AMPLITUDE (mv) TIME (ns) Note: [1] Peak to peak amplitude does not change relative to N. [2] Pulse duty cycle changes relative to N. 5 For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 1824Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 916, Norwood, MA Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D

7 HMC75LP4 / HMC75LP4E v4.212 Absolute Maximum Ratings Typical Supply Current vs. Vcc RF Input (Vcc= +5V) Supply Voltage (Vcc) Logic Inputs +13 dbm +5.5V Junction Temperature (Tc) 135 C Continuous Pdiss (T = 85 C) (derate 49 mw/ C above 85 C) Thermal Resistance (Junction to ground paddle) -.5V to (.5V + Vcc) 2.4 W 2.5 C/W Storage Temperature -65 to +15 C Operating Temperature -4 to +85 C Outline Drawing Package Information Vcc (V) Icc (ma) Note: HMC75LP4E will work over full voltage range above. ELECTROSTATIC sensitive Device OBserve HANDLING PRECAutions Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] [1] H75 HMC75LP4 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 XXXX [2] H75 HMC75LP4E RoHS-compliant Low Stress Injection Molded Plastic 1% matte Sn MSL1 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 26 C [3] 4-Digit lot number XXXX NOTES: 1. LEADFRAME MAteriAL: copper ALLOY 2. DIMensions ARE in inches [MILLIMeters]. 3. LEAD SPAcinG TOLERAnce is non-cumulative 4. PAD Burr LENGTH SHALL BE.15mm MAXIMUM. PAD Burr HEIGHT SHALL BE.5mm MAXIMUM. 5. PACKAGE WARP SHALL not EXceeD.5mm. 6. ALL GrounD LEADS AND GrounD PADDLE Must BE soldered TO PCB RF GrounD. 7. refer TO Hittite APPLICAtion note FOR suggested PCB LAND PAttern. For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 1824Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 916, Norwood, MA Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D 6

8 HMC75LP4 / HMC75LP4E v4.212 Pin Description Pin Number Function Description Interface Schematic 1-6, 8, 18 N/C 7, 2-24 DIV1, S N - N2 BYP The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. PFD invert function CMOS compatible input control bit Logic LOW = normal Logic HIGH = invert 9, 19 Vcc1, Vcc2 Supply Voltage 1, 13, 14, 17 GND These pins and package bottom must be connected to RF DC ground. 11 NFin (These pins are AC coupled and must be DC Blocked externally.) 12 Fin Frequency Input Frequency Input Complement 15 NFout Frequency, output complement 16 Fout Frequency output 7 For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 1824Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 916, Norwood, MA Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D

9 HMC75LP4 / HMC75LP4E v4.212 HMC75LP4(E) Programming Truth Table Division Ratio N S N N1 N2 DIV 1 BYP = Logic Low 1 = Logic High For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 1824Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 916, Norwood, MA Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D 8

10 HMC75LP4 / HMC75LP4E v4.212 Evaluation PCB Circuit 9 For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 1824Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 916, Norwood, MA Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D

11 HMC75LP4 / HMC75LP4E v4.212 Evaluation PCB List of Materials for Evaluation PCB [1] Item J1 - J4 J5 J6 R1 Description PCB Mount SMA Connector 14 Position Header 4 Position Header 1K Ohm Resistor Network, Bissel SMD C1, C2 1 pf Capacitor, 42 Pkg. C3 - C5 C6 - C8 C9 U1 PCB [2] 1 pf Capacitor, 42 Pkg. 1 pf Capacitor, 63 Pkg. 4.7 μf Tantalum Capacitor, Case A HMC75LP4(E) Programmable Divider Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 435 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 5 Ohm impedance while the package ground leads and backside ground paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 1824Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 916, Norwood, MA Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D 1

12 HMC75LP4 / HMC75LP4E v4.212 Typical PLL Application Circuit using HMC75LP4(E) PLL application shown for Divide-by-1. Contact HMC to discuss your specific application. 11 For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 1824Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 916, Norwood, MA Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D

13 HMC75LP4 / HMC75LP4E v4.212 Typical Application Showing Spurious Performance CMOS/TTL Input Characteristics Maximum Input Logic Voltage (V IL MAXIMUM ) = 1 µa. Minimum Input Logic 1 Voltage (V IH MINIMUM ) = 5 µa. Input iv characteristics for the logic inputs (S, N - N2, Divi, BYP) are shown below: Input Current (ma) V V IL MAX IH MIN Input Voltage (V) For price, delivery and to place orders: Hittite Microwave Corporation, For price, 2 delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 1824Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 916, Norwood, MA Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D 12