W 2: Sub-Miniature Photoelectric Switch Range: Super-Small and Powerful

Transcription

1 W Photoelectric switches Photoelectric proximity switches BGS Photoelectric proximity switches energetic, (V optics) Photoelectric reflex switches W : Sub-iniature Photoelectric Switch Range: Super-Small and Powerful The W range offers particular benefits: Small housing dimensions allow fitting very close to objects. Fast commissioning, easy connection, alignment ready. Laser-like light spot dimensions enable precise detection, e.g. for positioning tasks. Even transparent objects or product with reflective surfaces can be detected reliably and accurately. Through-beam photoelectric switches CConfined spaces in and around machinery and yet the sensor must meet exacting requirements? The Series W photoelectric switches and photoelectric proximity switches, in two specially developed housing configurations, fit into the smallest spaces and are suitable for virtually any task. Largely insensitive to ambient light and unwanted background reflections, these sensors reliably perform their tasks, even in arduous daily industrial use. The following W options are available: Photoelectric proximity switches with background suppression and scanning distances of 5 mm and 0 mm. Energetic photoelectric proximity switches with V optics and scanning distances of 9 mm, 8 mm and 55 mm. Energetic photoelectric proximity switches with scanning distances of mm and 5 mm. Photoelectric reflex switches with a scanning range of.5 m. Through-beam photoelectric proximity switches with scanning ranges of 0.5 m and. m. 7 SENSICK CATALOGUE

2 W n Fits in almost anywhere. The WT Flat photoelectric reflex switch is only.5 mm thick and reliably detects transparent and reflective objects. b Well adaptable in cramped spaces. Laser-like light spot provides most precise positioning tasks. v Detection of transparent lids on a gripper arm. m WL Slim photoelectric reflex switch with high scanning range SENSICK CATALOGUE 75

3 Photoelectric proximity switch, WT Slim, BGS, red light Scanning distance... 5/0 mm Photoelectric proximity switch A focused, laser-like light spot makes the most precise detection jobs possible Insensitive to interference from critical backgrounds Sturdy housing with metal sleeves for bolts Dimensional drawing ø Standard direction of material being scanned ounting hole Ø. mm LED signal strength indicator Optical axis,receiver 5 Optical axis,sender Connection type WTS-F WTS-N WTS-N WTS-P WTS-P WTS-F WTS-P WTS-P WTS-P WTS-P See chapter Accessories Connector, 8, -pin Connector, 8, -pin ounting systems x 0.09 mm² 8, -pin 8, -pin NC 76 SENSICK CATALOGUE

4 W Technical specifications WTS- F F N N P P P P P P Scanning distance typ. max mm )... 5 mm ) Light source, light type Pin Point LED, Red light ) Light spot diameter Supply voltage V s DC V ) Ripple < 5 V PP ) Power consumption < 0 ma 5) Switching outputs Switching mode Output current I a max Approx..0 mm at 5 mm distance Approx.. mm at 8 mm distance Approx..5 mm at 5 mm distance PNP, NPN, Dark-switching Light-switching < 50 ma Response time < 0.6 ms 6) Switching frequency 800 Hz 7) Connection type Cable, PVC, m 8) VDE protection class Cable with plug, 8, -pin, PVC, 00 mm 8) Cable with plug, 8, -pin, PVC, 00 mm 8) Circuit protection V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression Enclosure rating IP 67, IP 69K Ambient temperature operation -0 C C Ambient temperature storage -0 C C Weight 8 g 0 g Housing material ABS, PA ) Object with 90% remission (based on standard white to DIN 50) ) Average service life 75,000 h at T a = +5 C ) Limit values ) may not exceed or fall short of V s tolerances 5) without load 6) Signal transit time with resistive load 7) with light/dark ratio : 8) do not bend below 0 C Scanning distance and light spot diameter Scanning distance... 0 mm Scanning distance... 5 mm (mm) (mm) Scanning distance on black, 6 % remission Scanning distance on grey, 8 % remission Scanning distance on white, 90 % remission Scanning distance on black, 6 % remission Scanning distance on grey, 8 % remission Scanning distance on white, 90 % remission Light spot diameter at SD... 0 mm Ø.0 mm Ø. mm Ø.0 mm Ø.0 mm Ø.5 mm Sensor Distance [mm] Light spot diameter at SD... 0 mm Sensor Ø.0 mm Ø. mm Ø.5 mm Distance [mm] Ordering information Type Order no. WTS-F WTS-F 0 7 WTS-N 0 66 WTS-N 0 66 WTS-P WTS-P 0 66 WTS-P WTS-P WTS-P 0 6 WTS-P SENSICK CATALOGUE 77

5 Photoelectric proximity switch, WT Slim, energetic, V optics, red light Scanning distance mm Photoelectric proximity switch Precise, small light spot Extremely good size/ performance ratio Sturdy housing with metal sleeves for bolts Dimensional drawing ø ounting hole Ø. mm LED signal strength indicator Optical axis,receiver Optical axis,sender Connection type WTS-N6 WTS-P6 WTS-P6 WTS-P6 See chapter Accessories Connector, 8, -pin Connector, 8, -pin ounting systems x 0.09 mm² 8, -pin 8, -pin NC 78 SENSICK CATALOGUE

6 W Technical specifications WTS- N6 P6 P6 P6 Scanning distance typ. max mm ) Light source, light type Pin Point LED, Red light ) Light spot diameter Supply voltage V s DC V ) Ripple < 5 V PP ) Power consumption < 0 ma 5) Switching outputs Switching mode Output current I a max Approx..5 mm at 50 mm distance NPN, PNP, Light-switching < 50 ma Response time < 0.6 ms 6) Switching frequency 800 Hz 7) Connection type Cable, PVC, m 8) VDE protection class Cable with plug, 8, -pin, PVC, 00 mm 8) Cable with plug, 8, -pin, PVC, 00 mm 8) Circuit protection V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression Enclosure rating IP 67, IP 69K Ambient temperature operation -0 C C Ambient temperature storage -0 C C Weight 8 g 0 g Housing material ABS, PA ) Object with 90% remission (based on standard white to DIN 50) ) Average service life 75,000 h at T a = +5 C ) Limit values ) may not exceed or fall short of V s tolerances 5) without load 6) Signal transit time with resistive load 7) with light/dark ratio : 8) do not bend below 0 C Scanning distance and light spot diameter 0 Ø.0 mm Ø. mm Ø. mm Ø. mm Ø. mm Ø.5 mm (mm) Sensor Scanning distance on black, 6 % remission Scanning distance on grey, 8 % remission Scanning distance on white, 90 % remission 0 Distance [mm] Ordering information Type Order no. WTS-N WTS-P WTS-P WTS-P SENSICK CATALOGUE 79

7 Photoelectric proximity switch, WT Flat, energetic, V optics, red light Scanning distance /... 9/8 mm Photoelectric proximity switch Detection of transparent and reflective objects Robust housing with metalreinforced fixing holes Simple adjustment. Connect, align - ready No external amplifier required. Can be directly connected to the machine control system Dimensional drawing ounting hole Ø. mm Optical axis, sender Optical axis, receiver LED indicator orange; output active 5 LED indicator green; strength indicator 6 Connection Connection type WTF-N0 WTF-N70 WTF-P0 WTF-P70 WTF-P0 WTF-P70 WTF-P0 WTF-P70 See chapter Accessories Connector, 8, -pin Connector, 8, -pin x 0.09 mm² 8, -pin 8, -pin NC 80 SENSICK CATALOGUE

8 W Technical specifications WTF- N0 N70 P0 P70 P0 P70 P0 P70 Scanning distance typ. max mm )... 9 mm ) Operating distance... 5 mm )... 8 mm ) Light source, light type LED, Red light, 660 nm ) Supply voltage V s DC... V ) Ripple 5 V ) PP Power consumption 0 ma 5) Switching outputs NPN: open collector: PNP: open collector: Switching mode Light-switching Signal voltage PNP HIGH / LOW V s -.8 V / approx. 0 V Signal voltage NPN HIGH / LOW Approx. V s / <.8 V Output current I a max 50 ma Response time 0.5 ms 6) Switching frequency,000 Hz 7) Connection type Cable, PVC, m 8) VDE protection class Circuit protection Enclosure rating IP 67 Ambient temperature operation -0 C C Ambient temperature storage -0 C C Weight Approx. 0 g Housing material PC / PBT, PC ) Object with 90% remission (based on standard white to DIN 50) ) Average service life 00,000 h Cable with plug, 8, -pin, PVC, 00 mm 8) Cable with plug, 8, -pin, PVC, 00 mm 8) V s connections reverse-polarity protected / In-/outputs short-circuit protected / Outputs overcurrent and short-circuit protected at T a = +5 C ) ± 0% ) may not exceed or fall short of V s tolerances 5) without load 6) Signal transit time with resistive load 7) with light/dark ratio : 8) do not bend below 0 C Scanning distance and function reserve Scanning distance... 8 mm Scanning distance... 9 mm (mm) (mm) Scanning distance on black, 6 % remission Scanning distance on grey, 8 % remission Scanning distance on white, 90 % remission Scanning distance on black, 6 % remission Scanning distance on grey, 8 % remission Scanning distance on white, 90 % remission 0 WTF, SD = 8 mm 0 WTF, SD = 9 mm Function reserve Scanning distance typ. max (mm) Function reserve SENSICK CATALOGUE 8 (mm) Scanning distance typ. max Ordering information Type Order no. WTF-N WTF-N WTF-P WTF-P WTF-P WTF-P WTF-P WTF-P

9 Photoelectric proximity switch, WT Flat, energetic, red light Scanning distance /... /5 mm Photoelectric proximity switch Robust housing with metalreinforced fixing holes Simple adjustment. Connect, align - ready No external amplifier required. Can be directly connected to the machine control system Dimensional drawing ounting hole Ø. mm Optical axis, sender Optical axis, receiver LED indicator orange; output active 5 LED indicator green; strength indicator 6 Connection Connection type WTF-N50 WTF-N80 WTF-P50 WTF-P80 WTF-P50 WTF-P80 WTF-P50 WTF-P80 See chapter Accessories Connector, 8, -pin Connector, 8, -pin x 0.09 mm² 8, -pin 8, -pin NC 8 SENSICK CATALOGUE

10 W Technical specifications WTF- N50 N80 P50 P80 P50 P80 P50 P80 Scanning distance typ. max.... mm )... 5 mm ) Operating distance... 0 mm ) mm ) Light source, light type LED, Red light, 660 nm ) Supply voltage V s DC... V ) Ripple 5 V PP ) Power consumption 0 ma 5) Switching outputs Switching mode Signal voltage PNP HIGH / LOW Signal voltage NPN HIGH / LOW Output current I a max NPN: open collector: PNP: open collector: Light-switching V s -.8 V / approx. 0 V Approx. V s / <.8 V 50 ma Response time 0.5 ms 6) Switching frequency,000 Hz 7) Connection type Cable, PVC, m 8) VDE protection class Cable with plug, 8, -pin, PVC, 00 mm 8) Cable with plug, 8, -pin, PVC, 00 mm 8) Circuit protection V s connections reverse-polarity protected / In-/outputs short-circuit protected / Outputs overcurrent and short-circuit protected Enclosure rating IP 67 Ambient temperature operation -0 C C Ambient temperature storage -0 C C Weight Approx. 0 g Housing material PC / PBT, PC ) Object with 90% remission (based on standard white to DIN 50) ) Average service life 00,000 h at T a = +5 C ) ± 0% ) may not exceed or fall short of V s tolerances 5) without load 6) Signal transit time with resistive load 7) with light/dark ratio : 8) do not bend below 0 C Scanning distance and function reserve Scanning distance... 5 mm Scanning distance... mm (mm) (mm) Scanning distance on black, 6 % remission Scanning distance on grey, 8 % remission Scanning distance on white, 90 % remission Scanning distance on black, 6 % remission Scanning distance on grey, 8 % remission Scanning distance on white, 90 % remission 00 WTF, SD = 5 mm 0 WTF, SD = mm Function reserve 0 Scanning distance typ. max (mm) Function reserve Scanning distance typ. max (mm) SENSICK CATALOGUE 8 Ordering information Type Order no. WTF-N WTF-N WTF-P WTF-P WTF-P WTF-P WTF-P WTF-P

11 Photoelectric reflex switch, WL Slim, red light Scanning range m Photoelectric reflex switch Extremely good size /performance ratio Easy and fast alignment using ball joint bracket Sturdy housing with metal sleeves for bolts Dimensional drawing ø ounting hole Ø. mm LED signal strength indicator Optical axis,receiver Optical axis,sender Connection type WLS-E WLS-F WLS-N WLS-P WLS-F WLS-P WLS-F See chapter Accessories Connector, 8, -pin Connector, 8, -pin ounting systems Reflectors x 0.09 mm² 8, -pin 8, -pin NC 8 SENSICK CATALOGUE

12 W Technical specifications WLS- E F F F N P P Scanning range typ. max. Scanning range, recommended Relating to m m Reflector PL 0 A Light source, light type Pin Point LED, Red light ) Light spot diameter 0 mm at 00 mm distance Supply voltage V s DC V ) Ripple < 5 V PP ) Power consumption < 0 ma ) Switching outputs Switching mode Output current I a max NPN, PNP, Dark-switching Light-switching < 50 ma Response time < 0.6 ms 5) Switching frequency 800 Hz 6) Connection type Cable, PVC, m 7) VDE protection class Cable with plug, 8, -pin, PVC, 00 mm 7) Cable with plug, 8, -pin, PVC, m 7) Circuit protection V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression Enclosure rating IP 67, IP69K Ambient temperature operation -0 C C Ambient temperature storage -0 C C Weight 8 g 0 g Housing material ABS, PA ) Average service life 75,000 h at T a = +5 C ) Limit values ) may not exceed or fall short of V s tolerances ) without load 5) Signal transit time with resistive load 6) with light/dark ratio : 7) do not bend below 0 C Scanning range and function reserve WL Slim (m) Operating range Scanning range typ. max. 0 Operating range 5 Reflector Type PL 0 A PL 0 A PL 0 A PL PL 0 F * ) Operating range m m m m m Function reserve 5 Scanning range typ. max. (mm) * ) With reflector arrangement along the sensor axis Ordering information Type Order no. WLS-E WLS-F WLS-F WLS-F 0 6 WLS-N WLS-P WLS-P SENSICK CATALOGUE 85

13 Through-beam photoelectric switch, WS/WE Slim, red light Scanning range m Through-beam photoelectric Dimensional drawing Excellent size/performance ratio Sturdy housing with metal sleeves for bolts ø. 7.6 ounting hole Ø. mm LED signal strength indicator Optical axis,receiver Optical axis,sender Connection type WS/WES-E WS/WES-F WS/WES-F Sender x 0.09 mm² 8, -pin NC See chapter Accessories Connector, 8, -pin ounting systems Receiver x 0.09 mm² 8, -pin 86 SENSICK CATALOGUE

14 W Technical specifications WS/WES- E F F Scanning range typ. max. Scanning range, recommended m 0... m Light source, light type Pin Point LED, Red light ) Light spot diameter 0 mm at 00 mm distance Supply voltage V s DC V ) Ripple < 5 V PP ) Power consumption, sender < 0 ma ) Power consumption, receiver < 0 ma ) Switching outputs Switching mode Output current I a max NPN, PNP, Dark-switching < 50 ma Response time <.5 ms 5) Switching frequency 00 Hz 6) Connection type Cable, PVC, m 7) VDE protection class Cable with plug, 8, -pin, PVC, 00 mm 7) Circuit protection V s connections reverse-polarity protected / Output and not short-circuit protected / Interference suppression Enclosure rating IP 67, IP69K Ambient temperature operation -0 C C Ambient temperature storage -0 C C Weight 6 g 0 g Housing material ABS, PA ) Average service life 75,000 h at T a = +5 C ) Limit values ) may not exceed or fall short of V s tolerances ) without load 5) Signal transit time with resistive load 6) with light/dark ratio : 7) do not bend below 0 C Scanning distance and function reserve (m) WS/WE Slim,. m Operating range Scanning range typ. max. 0 Function reserve Operating range Scanning range typ. max. (mm) Ordering information Type Order no. WS/WES-E WS/WES-F WS/WES-F SENSICK CATALOGUE 87

15 Through-beam photoelectric switch, WS/WE Flat, red light Scanning range m Through-beam photoelectric Robust housing with metalreinforced fixing holes Simple adjustment. Connect, align - ready No external amplifier required. Can be directly connected to the machine control system Dimensional drawing ounting hole Ø. mm Optical axis, sender Optical axis, receiver LED indicator green; supply voltage 5 LED indicator orange; output active 6 LED indicator green; strength indicator 7 Connection Connection type WS/WEF-E0 WS/WEF-F0 WS/WEF-N0 WS/WEF-F0 WS/WEF-P0 WS/WEF-F0 Sender x 0.09 mm² 8, -pin 8, -pin NC wht NC NC See chapter Accessories Connector, 8, -pin Connector, 8, -pin Receiver x 0.09 mm² 8, -pin 8, -pin NC 88 SENSICK CATALOGUE

16 W Technical specifications WS/WEF- E0 F0 F0 F0 N0 P0 Scanning range typ. max. Scanning range, recommended m m Light source, light type LED, Red light, 660 nm ) Supply voltage V s DC... V ) Ripple 5 V PP ) Power consumption, sender 0 ma Power consumption, receiver 5 ma ) Switching outputs Switching mode Signal voltage PNP HIGH / LOW Signal voltage NPN HIGH / LOW Output current I a max NPN: open collector: PNP: open collector: Dark-switching Light-switching V s -.8 V / approx. 0 V Approx. V s / <.8 V 50 ma Response time 0.5 ms 5) Switching frequency,000 Hz 6) Connection type Cable, PVC, m 7) VDE protection class Cable with plug, 8, -pin, PVC, 00 mm 7) Cable with plug, 8, -pin, PVC, 00 mm 7) Circuit protection V s connections reverse-polarity protected / In-/outputs short-circuit protected / Outputs overcurrent and short-circuit protected Enclosure rating IP 67 Ambient temperature operation -0 C C Ambient temperature storage -0 C C Weight Approx. 5 g Approx. 0 g Housing material PC / PBT, PC ) Average service life 00,000 h at T a = +5 C ) ± 0% ) may not exceed or fall short of V s tolerances ) without load 5) Signal transit time with resistive load 6) with light/dark ratio : 7) do not bend below 0 C Scanning distance and function reserve (mm) WS/WEF Operating range Scanning range typ. max. 0 Function reserve Scanning range typ. max (mm) Ordering information Type Order no. WS/WEF-E WS/WEF-F WS/WEF-F WS/WEF-F WS/WEF-N WS/WEF-P SENSICK CATALOGUE 89