W 280: Powerful sensors for standard applications

Transcription

1 W 80 Photoelectric switches Photoelectric proximity switches, energetic Photoelectric reflex switches W 80: Powerful sensors for standard applications Through-beam photoelectric switches The devices with light-/dark switching offer application flexibility and reduce both the number of options and stockholding. Overview of W 80 component system facilitates initial mounting and exchange, DC/AC devices comply with E (interference emission in domestic and commercial areas ), all complete and ready for use, IIn the W 80 series of photoelectric switches, three powerful device types cover the main areas of application for door/gate and access control, as well as storage and materials handling technology. Within the three device types, both direct and universal voltage versions are available. For better alignment, all devices are equipped with visible red light. The clever detail: In the cable versions (DC and UC) the sensor can be fully separated from the back part, with the cable in the back part remaining undisturbed. The combined advantage is easy initial mounting and straightforward exchange. as the mounting brackets and reflector (WL 80 only) are included in the supply. ain industries: Door/gate and access control, Storage and materials handling, echanical engineering. 80 SESICK CATALOGUE

2 W 80 v/n ore safety in door and gate areas with WL 80 and WS/WE 80 in domestic and commercial areas. Only this part of the device is exchanged The back part with cable remains. v component system: The clever detail of the cable version, easy initial mounting and exchange SESICK CATALOGUE 8

3 WT 80 Photoelectric proximity switches, energetic, red light DC Scanning distance mm Photoelectric proximity switches Red light or cable connection flexible and ready for use with rotatable plug connector Light-/dark-switchable ounting brackets (.0) included with delivery Dimensional drawing Ø Adjustments possible All types 7 Centre of optical axis receiver Centre of optical axis sender Cable entry gland /" PF for cable diameter to 0 mm or -core cable Ø.8 mm Plug, -pin, rotatable by 90 Signal strength indicator Sensitivity adjustment Light/dark rotary switch L = light-switching, D = dark-switching SES L D 7 Connection type WT80-P WT80- WT80-P0 WT80-0 WT80-P0 WT80-0 See chapter Accessories Cables and connectors ounting systems * ) * ) ounting brackets included with delivery x 0.8 mm Terminals -pin, brn blk L+ Q L+ Q C L+ Q C 8 SESICK CATALOGUE

4 WT 80 Technical data WT 80- P P 0 P Scanning distance, max. typ. 0 mm mm, adjustable ) Operating distance 0 mm mm, adjustable ) Light source ), light type LED, red light Light spot diameter Approx. 8 mm at. m Angle of dispersion, sender Approx. Supply voltage V S V DC ) Residual ripple ) V PP Current consumption ) 0 ma Switching outputs PP, open collector: Q P, open collector: Q Output current I A max. 00 ma Light receiver, switching mode Light-/dark-switching by rotary switch Response time ) 0. ms ax. switching frequency 7) 000/s Connection types ) Object with 90 % remission (based on standard white DI 0) ) Average service life 00,000 h at T A = + C ) Limit values, operation in short circuit network max. 8 A Cable 8), m plug, -pin VDE protection class (to VDE 00) Circuit protection 9) A, B, C, D Enclosure rating IP Ambient temperature Operation C... + C Weight Housing material Storage 0 C C Approx. 0 g Housing: ABS; optics: PA ) ay not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load 7) With light/dark ratio : 8) Do not bend below 0 C 9) A = V S connections reverse-polarity B = Inputs/outputs reverse-polarity C = Interference pulse suppression D = Outputs overcurrent and short-circuit Scanning distance WT (mm) Operating distance Scanning distance typ. max. Scanning distance on black, % remission Scanning distance on grey, 8 % remission Scanning distance on white, 90 % remission Operating reserve WT80-P0 WT80- WT80-0 WT Operating distance % 8 % 90 % [mm] Order information Type WT80-P WT80-P0 Order no SESICK CATALOGUE 8

5 WT 80 Photoelectric proximity switches, energetic, red light UC Scanning distance mm Photoelectric proximity switches Red light or cable connection ounting brackets (.0) included with delivery CE generic emission standard E ( Residential and Commercial Areas ) Dimensional drawing Ø. Adjustments possible WT80-S WT80-S0 Centre of optical axis receiver Centre of optical axis sender Cable entry gland /" PF for cable diameter to 0 mm or -core cable Ø. mm Signal strength indicator Sensitivity adjustment Connection type WT80-S WT80-S0 See chapter Accessories Cables and connectors ounting systems * ) * ) ounting brackets included with delivery x 0.7 mm brn wht blk gra L Terminals L 8 SESICK CATALOGUE

6 WT 80 Technical data WT 80- S S 0 Scanning distance, max. typ. 0 mm mm, adjustable ) Operating distance 0 mm mm, adjustable ) Light source ), light type LED, red light Light spot diameter Approx. 8 mm at. m Angle of dispersion, sender Approx. Supply voltage V ) S... 0 V DC/... 0 V AC Current consumption VA Switching outputs Relay x u, galv. separated ) ax. switching current A/0 V AC; A/0 V DC ) Light receiver Light-switching Response time 0 ms ax. switching frequency ) /s Connection types Cable 7), m VDE protection class 8) Circuit protection 9) A, C Enclosure rating IP Ambient temperature Operation C... + C Storage 0 C C Weight Approx. 0 g Housing material Housing: ABS; optics: PA ) Object with 90 % remission (based on standard white DI 0) ) Average service life 00,000 h at T A = + C ) ±0 % ) Provide suitable spark suppression for inductive and capacitive loads ) Usage category to E 097-, AC, DC ) With light/dark ratio : 7) Do not bend below 0 C 8) Reference voltage 0 V UC 9) A = V S connections reverse-polarity C = Interference pulse suppression Scanning distance WT 80 Order information Type WT80-S WT80-S0 Order no (mm) Operating distance Scanning distance typ. max. Scanning distance on black, % remission Scanning distance on grey, 8 % remission Scanning distance on white, 90 % remission 0 Operating reserve Operating distance % 8 % 90 % [mm] SESICK CATALOGUE 8

7 WL 80 Photoelectric reflex switches, red light DC Scanning range m Photoelectric reflex switches Polarising filter Red light Flexible and ready for use with rotatable plug connector Light-/dark-switchable Reflector P 0 and mounting brackets (.0) included with delivery Dimensional drawing Ø Adjustments possible All types 7 Centre of optical axis receiver Centre of optical axis sender Cable entry gland /" PF for cable diameter to 0 mm or -core cable Ø.8 mm Plug, -pin, rotatable by 90 Signal strength indicator Sensitivity adjustment Light/dark rotary switch L = light-switching, D = dark-switching SES L D 7 Connection type WL80-P WL80- WL80-P0 WL80-0 WL80-P0 WL80-0 See chapter Accessories Cables and connectors ounting systems * ) Reflectors ** ) * ) ounting brackets included with delivery ** ) Reflector P 0 included with delivery x 0.8 mm Terminals -pin, brn blk L+ Q L+ Q C L+ Q C 8 SESICK CATALOGUE

8 WL 80 Technical data WL 80- P P 0 P Scanning range, max. typ./on reflector m/pl 80 A Scanning range, max. typ./on reflector m/p m/p 0 Light source ), light type LED, red light Light spot diameter Approx. 80 mm at 0 m Angle of dispersion, sender Approx.. Supply voltage V S V DC ) Residual ripple ) V PP Current consumption ) 0 ma Switching outputs PP, open collector: Q P, open collector: Q Output current I A max. 00 ma Light receiver, switching mode Light-/dark-switching by rotary switch Response time ) 0. ms ax. switching frequency ) 000/s Connection types Cable 7), m plug, -pin VDE protection class (to VDE 00) Circuit protection 8) A, B, C, D Enclosure rating IP Ambient temperature Operation C... + C Storage 0 C C Weight Approx. 0 g Housing material Housing: ABS; optics: PA ) Average service life 00,000 h at T A = + C ) Limit values, operation in short circuit network max. 8 A ) ay not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : 7) Do not bend below 0 C 8) A = V S connections reverse-polarity B = Inputs/outputs reverse-polarity C = Interference pulse suppression D = Outputs overcurrent and short-circuit Scanning range and operating reserve WL 80 Order information Type WL80-P WL80-P0 WL80-P0 WL80- WL80-0 WL80-0 Order no (m) 8 0 Reflector type PL 80 A P 0 PL 0 A oder PL 0 A PL 0 A oder PL A PL 0 A Reflective tape Diamond Grade Scanning range, max. typ m m m m m m Operating reserve Operating range [m] SESICK CATALOGUE 87

9 WL 80 Photoelectric reflex switches, red light UC Scanning range m Photoelectric reflex switches Polarising filter Red light or cable connection Reflector P 0 and mounting brackets (.0) included with delivery CE generic emission standard E ( Residential and Commercial Areas ) Dimensional drawing Ø. Adjustments possible WL80-S WL80-S0 Centre of optical axis receiver Centre of optical axis sender Cable entry gland /" PF for cable diameter to 0 mm or -core cable Ø. mm Signal strength indicator Sensitivity adjustment Connection type WL80-S WL80-S0 See chapter Accessories Cables and connectors ounting systems * ) Reflectors ** ) * ) ounting brackets included with delivery ** ) Reflector P 0 included with delivery x 0.7 mm brn wht blk gra L Terminals L 88 SESICK CATALOGUE

10 WL 80 Technical data WL 80- S S 0 Scanning range, max. typ./on reflector m/pl 80 A Scanning range, max. typ./on reflector m/p m/p 0 Light source ), light type LED, red light Light spot diameter Approx. 80 mm at 0 m Angle of dispersion, sender Approx.. Supply voltage V ) S... 0 V DC/... 0 V AC Current consumption VA Switching outputs Relay x u, galv. separated ) ax. switching current A/0 V AC; A/0 V DC ) Light receiver Light-switching Response time 0 ms ax. switching frequency ) /s Connection type Cable ), m VDE protection class 7) Circuit protection 8) A, C Enclosure rating IP Ambient temperature Operation C... + C Storage 0 C C Weight Approx. 0 g Housing material Housing: ABS; optics: PA ) Average service life 00,000 h at T A = + C ) ±0 % ) Provide suitable spark suppression for inductive and capacitive loads ) Usage category to E 097-, AC, DC ) With light/dark ratio : ) Do not bend below 0 C 7) Reference voltage 0 V UC 8) A = V S connections reverse-polarity C = Interference pulse suppression Scanning range and operating reserve WL 80 Order information Type WL80-S WL80-S0 Order no (m) 8 0 Scanning range, max. typ. Reflector type PL 80 A P 0 PL 0 A oder PL 0 A PL 0 A oder PL A PL 0 A Reflective tape Diamond Grade m m m m m m Operating reserve Operating range [m] SESICK CATALOGUE 89

11 WS/WE 80 Through-beam photoelectric switches, red light DC Scanning range 0... m Through-beam photoelectric switches Red light or cable connection Flexible and ready for use with rotatable plug connector Light-/dark-switchable ounting brackets (.0) included with delivery Dimensional drawing Ø Adjustments possible WS80-D WS80-D0 WS80-D0 WE80-P WE80-P0 WE80-P0 SES L D WE80- WE80-0 WE80-0 Optical axis sender and receiver Cable entry gland /" PF for cable diameter to 0 mm or -core cable Ø.8 mm Plug, -pin, rotatable by 90 Signal strength indicator Sensitivity adjustment Light/dark rotary switch L = light-switching, D = dark-switching Connection type WS/WE80-P WS/WE80- WS/WE80-P0 WS/WE80-0 WS/WE80-P0 WS/WE80-0 x 0.8 mm Terminals -pin, See chapter Accessories Cables and connectors ounting systems * ) * ) ounting brackets included with delivery Sender brn L+ L+ C C L+ C C x 0.8 mm Receiver brn blk L+ Q L+ Q C L+ Q C 80 SESICK CATALOGUE

12 WS/WE 80 Technical data WS/WE 80- P P 0 P Scanning range, max. typ m m Light source ), light type LED, red light Light spot diameter Approx. m at 0 m Angle of dispersion, sender Approx.. Angle of reception, receiver Approx. Supply voltage V S V DC ) Residual ripple ) V PP Current consumption ) sender ma receiver ma Switching outputs PP, open collector: Q P, open collector: Q Output current I A max. 00 ma Light receiver, switching mode Light-/dark-switching by rotary switch Response time ) 0. ms ax. switching frequency ) 000/s Connection types Cable 7), m plug, -pin VDE protection class (to VDE 00) Circuit protection 8) A, B, C, D Enclosure rating IP Ambient temperature Operation C... + C Storage 0 C C Weight Approx. 0 g Housing material Housing: ABS; optics: PA ) Average service life 00,000 h at T A = + C ) Limit values, operation in short circuit network max. 8 A ) ay not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : 7) Do not bend below 0 C 8) A = V S connections reverse-polarity B = Inputs/outputs reverse-polarity C = Interference pulse suppression D = Outputs overcurrent and short-circuit and operating reserve (m) Scanning range, max. typ. 00 WS/WE 80 Order information Type WS/WE80-P WS/WE80-P0 WS/WE80-P0 WS/WE80- WS/WE80-0 WS/WE80-0 Order no Operating reserve Scanning range, max. typical [m] SESICK CATALOGUE 8

13 WS/WE 80 Through-beam photoelectric switches, red light UC Scanning range 0... m Through-beam photoelectric switches Red light or cable connection ounting brackets (.0) included with delivery CE generic emission standard E ( Residential and Commercial Areas ) Dimensional drawing Ø. Adjustments possible WS80-U WE80-S WS80-U0 WE80-S0 Optical axis sender and receiver Cable entry gland /" PF for cable diameter to 0 mm or - core cable Ø. mm Sensitivity adjustment Signal strength indicator Connection type WS/WE80-S WS/WE80-S0 x 0.7 mm Terminals See chapter Accessories Cables and connectors ounting systems * ) Sender blk L L * ) ounting brackets included with delivery x 0.7 mm Receiver brn wht blk gra L L 8 SESICK CATALOGUE

14 WS/WE 80 Technical data WS/WE 80- S S 0 Scanning range, max. typ m m Light source ), light type LED, red light Light spot diameter Approx. m at 0 m Angle of dispersion, sender Approx.. Angle of reception, receiver Approx. Supply voltage V ) S... 0 V DC/... 0 V AC Current consumption sender. VA receiver. VA Switching outputs Relay x u, galv. separated ) ax. switching current A/0 V AC; A/0 V DC ) Light receiver Light-switching Response time 0 ms ax. switching frequency ) /s Connection types Cable ), m VDE protection class 7) Circuit protection 8) A, C Enclosure rating IP Ambient temperature Operation C... + C Storage 0 C C Weight Approx. 0 g Housing material Housing: ABS; optics: PA ) Average service life 00,000 h at T A = + C ) ±0 % ) Provide suitable spark suppression for inductive and capacitive loads ) Usage category to E 097-, AC, DC ) With light/dark ratio : ) Do not bend below 0 C 7) Reference voltage 0 V UC 8) A = V S connections reverse-polarity C = Interference pulse suppression and operating reserve WS/WE 80 Order information Type WS/WE80-S WS/WE80-S0 Order no (m) Scanning range, max. typ. 0 Operating reserve Scanning range, max. typical [m] SESICK CATALOGUE 8