4. Output N: NPN P: PNP

Transcription

1 Sensor SALIENT FEATURES Upto 25m sensing Sensitivity Adjustable Light On/Dark On selectable Mutual Interference Prevention Compact; IP65 ( -2M)/ IP67 ( -M8C) Measurement Vision & Safety Model Number Legend Series 2. T: Through Beam R: Retro Reflective D: Diffuse Reflective BGS: Background Suppresion 4. Output N: NPN P: PNP 5. Connection 2M: 2 meter Cable M8C: M8 Connector 3. Sensing Distance #. Accessories included 1M: 1 Meter Mounting Bracket: 1 Set 4M: 4 Meters Screws: 1 Set 25M: 25 Meters #. Accessories (Order Separately) 90: 10~90mm Sensor Adjuster: 1 No Reflector: 1 No. (with Retro reflective models only) Example: -D-1MP-2M Series - Diffuse Reflective - 1 meter sensing, PNP, Prewired 2 meter NOTE: Contact us for models not shown in catalogue. Connector cables are sold separately; look in CC series catalogue for the same ( Weighing Control 01

2 Ratings and Specifications Sensing Through Beam Retro-Reflective Diffuse Reflective Background Suppression Weighing Control Vision & Safety Measurement NPN PNP Sensing Distance Light Source Spot Size Response Time Sensitivity Adjustment Operation Mode Supply Voltage Current Consumption Control Output Control Output Rating Operation Indication Shock Resistance Environmental Illuminance Ambient Temperature Ambient Humidity Cable Connector Cable Connector -T-25MN-2M -T-25MN-M8C -T-25MP-2M -T-25MP-M8C -R-4MN-2M -R-4MN-M8C -R-4MP-2M -R-4MP-M8C -D-1MN-2M -D-1MN-M8C -D-1MP-2M -D-1MP-M8C -BGS-90N-2M -BGS-90N-M8C -BGS-90P-2M -BGS-90P-M8C 25 Meters 4 Meters 1 Meters 10-90mm Red LED Ø 1800mm/ 25 m Ø 280mm/ 4 m Ø 75mm/ 1200mm Ø 8mm/ 90mm 500 µs Built-in externally adjustable 1 turn pot. Light ON / Dark ON Selectable VDC (Ripple Max 10%) Emitter: max. 20mA; : Max. 20 ma Max. 25 ma Max. 20 ma max. 15MA NPN or PNP open collector output Load Voltage: max. 30 VDC; Load Current: max 100mA GREEN: Stable; Orange: Output ON 100 G- X,Y, Z three directions Sunlight: 10,000 lux, Lamp: 3,000 lux -25 ~ 55 C(no freezing) 35 ~ 85% RH(non- condensing) Protection Class IP67 Weight Material approx. 10g without cable Housing: ABS with Glass, Lens: PMMA or Eqv. Note: * - Standard reflector. Special types are to be ordered seperately. 02

3 Sensor Dimension Drawing Through Beam - Cable -T-25MN-2M 11 Operation indication (ORANGE) 11 Stable indication (GREEN) T-25MP-2M Optical axis of emitted light Emitter Cable: Ø3.8, 3 pins x 0.2 mm 2 *Shown mounting to bracket A Through Beam - Connector -T-25MN-M8C -T-25MP-M8C 11 Operation indication (ORANGE) 11 Stable indication (GREEN) 3 20 Measurement Optical axis of emitted light Vision & Safety Emitter Cable: Ø3.8, 3 pins x 0.2 mm 2 5 *Shown mounting to bracket B* Retro-reflective / Diffuse-reflective / Background suppresion - Cable -R-4MN-2M -R-4MP-2M -D-1MN-2M -D-1MP-2M -BGS-90N-2M -BGS-90P-2M Output indicator (orange) Sensitivity adjuster Light on / Drak on Switch Stability indicators (GREEN) Optical axis of emitted light Control 2.8 *Shown mounting to bracket A Cable: Ø3.8, 3 pins x 0.2 mm 2 Retro-reflective / Diffuse-reflective / Background suppresion - Connector Weighing -R-4MN-M8C -R-4MP-M8C -D-1MN-M8C -D-1MP-M8C -BGS-90N-M8C -BGS-90P-M8C Output indicator (orange) Sensitivity adjuster Light on / Drak on Switch Stability indicators (GREEN) Optical axis of emitted light *Shown mounting to bracket B* Cable: Ø3.8, 3 pins x 0.2 mm 2 All dimensions are in mm 03

4 Sensor Dimension Drawing Reflector Bracket - A Bracket - B* Ordering Code: MS-2A Ordering Code: FK-B1 Ordering Code: FK-B2 Weighing Control Vision & Safety Measurement Note: * - Bracket B is optional and is to be ordered separately Control Output Diagram Operation All dimensions are in mm 04

5 Connection Through Beam Retro- reflective NPN Load PNP Load Reflector NPN Load PNP Load Diffusive / Background Suppresion Connector * Measurement NPN Load PNP Load Vision & Safety Note: * - Connector Cable is not supplied along with unit. (Sold Separately) Operational Data Through Beam Parallel Shifting X Y Emitter Operating point Y (mm) Angle X θ Sensor -T-25M_- Control Weighing Operation Angle (θ) 05

6 Operational Data Retroreflective Weighing Control Vision & Safety Measurement Parallel Shifting -R-4M_- Diffuse Reflective Sensing Area Background Suppresion Sensing Area Black 6% Reflectance Black 6% Reflectance Reflector l1 Sensor Angle Grey 6% Reflectance -R-4M_- Operation Angle (θ) Grey 18% Reflectance Reflector White 90% Reflectance Reflector Angle White 90% Reflectance -R-3M_- Operation Angle (θ) Spot Size Sensor Sensor Reflector ø75 mm ø50 mm ø38 mm ø23 mm Sensing Distance (mm) Spot Size ø6.5 mm ø5 mm ø8 mm Sensing Distance (mm) 06

7 Operation and Timing Diagram Through Beam Retroreflective, Diffuse, Background Suppresion Measurement Vision & Safety Light ON Mode # The waveform of Operation indicator & TR output is for Light ON mode, it is operated conversely for Dark ON mode Mounting and Adjustments NOTE: Screw size M3 is to be used for mounting of sensor to the bracket. Tightening torque is max. 0.5kgf-cm Through Beam Place the emitter and receiver facing each other and connect to power Adjust the position of the emitter and receiver to check their stable indicating range. Mount them in the middle of the range. After mounting, check the oper- -ation of the sensor and the light of the Operation indicator in both None and Sensing target* status. *When the sensing target is translucent or small ie. does not fall under the sensing target specifications; it can be missed by the sensor. Retroreflective Place the sensor and reflector facing each other and connect to power Adjust the position of the sensor and reflector to check their stable indicating range. Mount them in the middle of the range. After mounting, check the oper- -ation of the sensor and the light of the Operation indicator in both None and Sensing target* status. Diffuse Reflective, Background Suppresion Place a sensing target; adjust the sensor Up/ Down/ Right/ Left. Then, fix the sensor in the center position of where the indicator is operational. Weighing Control 07

8 Operation Mode Adjustment Weighing Control Vision & Safety Measurement Output ON Output ON Output ON Light ON Mode Turn the operation switching adjuster to the right to set it in Light ON mode. Through Beam Retroreflective Diffuse Reflective, Background Suppresion Sensitivity Adjustment LIGHT ON Status Follow the steps given below after mounting the sensor for optimum performance Dark ON Mode Turn the operation switching adjuster to the left to set it in Light OFF/ Dark ON mode. LIGHT OFF Status Turn the sensitivity adjuster to the right of min. and check the position (A) where the indicator is turned on in Light ON Status. Turn the sensitivity adjuster more to the right of the position (A); check the position (B) where the indicator is turned on and turn the adjuster to the left, check the position (C) where the indicator is turned off in Light OFF Status. *if the indicator is not lighted although the adjuster is turned to the max position, the max. position is (C). Set the adjuster at the center of (A) and (C). To set the optimum sensitivity, check the operation and lighting of stable indicator with sensing target or without it. If the indicator is not lighted, please check the sensing method again because sensitivity is unstable. Exclusively Represented by: Intech Systems Chennai Pvt Ltd S-2, Guindy Industrial Estate Chennai Ph: info@intechchennai.com INNO, Rights Reserved In the interest of continious product improvement specifications are subject to change without notice Cat. No