Built-in Amplifier Photoelectric Sensor
|
|
- Garey Henderson
- 5 years ago
- Views:
Transcription
1 Built-in Amplifier Photoelectric Sensor Easy-to-use, Low-cost Photoelectric Sensor Incorporating s that can be clearly seen from a distance Conforms to EN and IEC standards Incorporating polarizing function, thus accurately detecting shiny objects Resin-filled construction resists vibration and ensures IP67 water-resistance 2 meter attached cable Ordering Information Connections Supply voltage Sensing type Sensing range Part number Mode Type Pre-leaded 12 to 24 VDC Through-beam 7 m (2 ft) Light-/Dark- NPN -T61 (selectable -T81 by wiring) Polarized 2 m (6.6 ft) NPN -R61 retroreflective -R81 Diffuse 0.5 to 8 cm NPN -D61 reflective (0.20 to.15 in) -D81 70 cm (2. ft) NPN -D62 -D82 Pigtail lead with 12 to 24 VDC Through-beam 7 m (2 ft) Light-/Dark- NPN -T61-MJ M8 connector (selectable -T81-MJ by wiring) Polarized 2 m (6.6 ft) NPN -R61-MJ retroreflective -R81-MJ Diffuse 0.5 to 8 cm NPN -D61-MJ reflective (0.20 to.15 in) -D81-MJ 70 cm (2. ft) NPN -D62-MJ -D82-MJ Note: Mounting brackets are not provided with the. Order them separately below. CNECTOR CORDSETS Description Straight connector, 2 m (6.56 ft), 4-conductor cable Straight connector, 5 m (16.4 ft), 4-conductor cable Extension cable, 2 m (6.56 ft), connectors at both ends Extension cable, 5 m (16.4 ft), connectors at both ends Part number XSF-M R XSF-M R XSW-M R XSW-M R
2 ACCESSORIES Description Slits for through-beam type, set of pairs includes 0.5 mm, 1 mm and 2 mm slits Part number E9-S7 Reflectors Corner cube type 5 to 100 cm (2.0 in to 1.64 ft) E9-R Glass bead, adhesive back 20 to 50 cm (7.9 in to 19.7 in) E9-RSA 20 to 80 cm (7.9 in to 1.5 in) E9-RSB Optional mounting brackets Side mounting bracket E9-L4 Rear-mounting bracket Rotating post bracket Metal cover bracket Vertical mounting bracket For E9-R1 reflector E9-L44 E9-L9 E9-L98 E9-L104 E9-L7 REPLACEMENT PART Description Reflector supplied with each retroreflective sensor Part number E9-R1 Specifications Sensing method Through-beam Retroreflective Diffuse reflective (with MSR function) NPN output -T61 -R61 -D61 -D62 output -T81 -R81 -D81 -D82 LED light source Infrared LED Red LED Infrared LED Sensitivity adjustment Adjustor Connection method Pre-leaded: 2 m (6.6 ft) Weight Approx. 160 g (with 2-m cord) Approx. 80 g (with 2-m cord) Mode Wire selectable (Light- or Dark-) Circuit protection Overload protection, reversed connection protection, and mutual interference prevention function (except for through-beam models) Indicators Operation (orange), stability (green), emission for through-beam models only (orange) Materials Case Heat-resistive ABS Lens Methacrylic resin Attachments Instruction sheet and reflector (E9-R1 retroreflective model only) (See Note.) Note: The mounting brackets are sold separately. 2
3 RATINGS/CHARACTERISTICS Part number -T61/-T81 -R61/-R81 -D61/-D81 -D62/-D82 Sensing method Through-beam Retroreflective (with MSR function) Diffuse reflective Supply voltage 12 to 24 VDC ±10%, ripple (p-p): 10% max. Current consumption 50 ma max. 40 ma max. Detection distance 7 m 0.1 to 2 m (with E9-R1) 0.5 to 8 cm 70 cm Standard detectable object Opaque object: 7 mm Opaque object: 0 mm 10 x 10 cm white 20 x 20 cm white paper min. (0.28 in) min. (1. in) paper Directional angle to 15 Receiver/Emitter: 2 to 10 Reflector: 0 min. --- Differential travel % max. of detection distance Response time Control output Ambient illumination Incandescent lamp 1 ms max. for both operation and release 100 ma max. at 0 VDC, open collector output (residual voltage: 1 V max.) Illumination on optical spot:,000 x max. Sunlight Illumination on optical spot: 10,000 x max. Ambient Operating 25 C to 55 C ( 1 F to 11 F) with no icing temperature Storage 40 C to 70 C ( 40 F to 158 F) Relative Operating 5% to 85% humidity Storage 5% to 95% Insulation resistance Dielectric strength Vibration resistance Shock resistance Enclosure IEC rating 20 MΩ min. (at 500 VDC) 1,000 VAC, 50/60 Hz for 1 min 10 to 55 Hz, 1.5-mm double amplitude for 2 hrs each in X, Y, and Z directions 500 m/s 2 (approx. 50G) times each in X, Y, and Z directions IP67
4 Engineering Data PARALLEL OPERATING RANGE (TYPICAL) -T 1 REFLECTOR PARALLEL MOVEMENT (TYPICAL) -R 1 OPERATING RANGE (TYPICAL) -D 2 Parallel operating range Y (cm) Parallel operating range Y (mm) Reflector placed vertically Operating position Y (mm) Detection distance X (m) Detection distance X (m) Detection distance X (cm) DETECTI DISTANCE VS. OBJECT SIZE (TYPICAL) -D 2 COLOR OF OBJECT VS. OPERATING RANGE (TYPICAL) -D 1 DETECTI DISTANCE VS. OBJECT SIZE (TYPICAL) -D 1 Detection distance (cm) Detectable object: White paper Parallel operating range Y (mm) Black carbon Detectable object (200 x 200 mm) White paper SUS (lustrous) Detection distance X (mm) Detection distance (mm) SUS (lustrous) White paper Black carbon Size of object d (cm) Detection distance X (mm) Size of object d (mm) 4
5 EXCESS GAIN VS. SET DISTANCE (TYPICAL) -T 1 -R 1 -D 2 Excess gain ratio Excess gain ratio Operating level Operating level Operating level Excess gain ratio Distance (m) Distance (m) Distance (cm) -D 1 Excess gain ratio Operating level Distance (cm) Operation OUTPUT CIRCUITS Configuration Mode Switch Connection Method Circuits NPN (- 6 ) Light- cord to the brown cord. (See Note.) Operation Stability (Green) Brown Black 100 ma max. 12 to 24 VDC Connector Pin Arrangement Main circuit Blue 0 V Pink Operating selection Dark- cord to the blue cord or disconnect the pink cord from the blue cord. (See Note.) Operation Stability (Green) Main circuit Brown Black Blue Pink 100 ma max. 12 to 24 VDC 0 V Operating selection Connector Pin Arrangement 5
6 Configuration Mode Switch Connection Method Circuits (- 8 ) Light- cord to the brown cord. (See Note.) Operation Stability (Green) Brown Black 12 to 24 VDC Connector Pin Arrangement Main circuit Blue 100 ma max. Pink 0 V Operating selection Dark- cord to the blue cord or disconnect the pink cord from the blue cord (See Note.) Operation Stability (Green) Main circuit Brown Black Blue 100 ma max. 12 to 24 VDC 0 V Connector Pin Arrangement Pink Operating selection Note: The Model with a junction connector has a white cord instead of a pink cord. Emitter (NPN/) Emitter (orange) Brown Connector Pin Arrangement Main circuit 12 to 24 VDC Blue TIMING CHARTS Configuration NPN (- 6 ) (- 8 ) Note: Mode Switch Light- Dark- Light- Dark- Connection Method cord to the brown cord. (See Note.) cord to the blue cord or disconnect the pink cord from the blue cord. (See Note.) cord to the brown cord. (See Note.) cord to the blue cord or disconnect the pink cord from the blue cord. (See Note.) Timing Chart Light received Light not received Light transistor Light received Light not received Light transistor Light received Light not received Light transistor Light received Light not received Light transistor Operate Release Operate Release Operate Release Operate Release The Model with a junction connector has a white cord instead of a pink cord. (Between brown and black) (Between brown and black) (Between blue and black) (Between blue and black) 6
7 SENSITIVITY ADJUSTMENT (REFLECTIVE SENSORS) (Diffuse reflective model in light- mode) Item Position A Position B Setting Sensing condition Photoelectric Sensor Photoelectric Sensor --- Sensitivity adjustor Detectable object Detectable object Background object Indicators STABILITY (green) OPERATI (orange) STABILITY (green) OPERATI (orange) STABILITY (green) OPERATI (orange) Procedure Note: Locate the sensing object at the detection distance of the and turn the sensitivity adjustor clockwise to increase the sensitivity of the until the orange operation is lit. The moment the orange operation is lit, stop turning the sensitivity adjustor, the position of which is point A. Remove the sensing object and turn the sensitivity adjustor clockwise until the detects the background object and the orange operation is lit. The moment the orange operation is lit, stop turning the sensitivity adjustor, the position of which is point B. Turn the sensitivity adjustor counterclockwise to decrease the sensitivity of the until the orange operation is off. The moment the orange operation is off, stop turning the sensitivity adjustor, the position of which is point C. If there is no background object, point C is where the sensitivity adjustor is set to maximum. Set the sensitivity adjustor midway between points A and C, where the best sensitivity of the for the sensing object is ensured, and make sure that the green stability is lit with and without the sensing object at that position of the sensitivity adjustor. If the green stability is not lit, try another sensing method. The rotation range of the sensitivity adjustor is 240. Do not try to turn the sensitivity adjustor clockwise or counterclockwise excessively, otherwise the sensitivity adjustor will break. 7
8 Dimensions Unit: mm (inch) -T Optical axis Operation (See Note.) Stability (See Note.) Lens 10.4 (0.41).95 (0.16) 11. (0.44) 15.7 (0.62) 4 (0.16) Sensitivity adjustor 0.5 (0.02) -D Note: 9.6 (0.8) Optical axis 7 (0.28). (0.72) 7.5 (1.48) 5.5 Lens (1.40) 25.4 (1.00) (0.12) Operation Stability The emitter has no s except for an emission. (See Note.) 11. (0.44) 10.4 (0.41).95 (0.16) 15.7 (0.62) Vinyl-insulated cord with four conductors, 4 dia. (16 x 0.12 dia.); standard length: 2 m Brown: Vcc Blue: 0 V Black: Pink: Mode selection Each cord of the emitter consists of two conductors 4 (0.16) Sensitivity adjustor 0.5 (0.02) 14.8 (0.58) (0.28) 7.5 (1.48) 5.5 (1.40) (1.00) (0.67) (0.12) Vinyl-insulated cord with four conductors, 4 dia. (16 x 0.12 dia.); standard length: 2 m Brown: Vcc Blue: 0 V Black: Pink: Mode selection Note:.4 (0.72) for -D61/-D81. -R Optical axis Lens Operation Stability 10.4 (0.41).95 (0.16) 2 (0.08) 11. (0.44) 15.7 (0.62) 4 (0.16) Sensitivity adjustor 0.5 (0.02) 21 (0.8) (0.67) 7.5 (1.48) (1.00) (1.40) Vinyl-insulated cord with four conductors, 4 dia. (16 x 0.12 dia.); standard length: 2 m 6.4 (0.25) (0.12) Brown: Vcc Blue: 0 V Black: Pink: Mode selection 8
9 REFLECTORS E9-R1 Retroreflector Provided with the -R61/-R81 Two,.5 dia 40. (1.59) 4 (1.4) 7 (0.28) 7.5 (0.0) 59.9 (2.6) 52 (2.05) 1.6 (0.06) 8 (0.1) 2.7 (0.11) E9-R Retroreflector (Small Type) 4.8 (1.7) 19. (0.76) 22.5 (0.89) 11 (0.4) 2.6 (0.10) Adhesive tape 20 (0.79) 0.2 (0.01) (1.50) (0.10) 4 (1.4) With Mounting Bracket (Sold Together) ( ) (1.65) (0.).4 (0.1) (0.7) (1.10) 22.9 (0.90) 8 (1.50) 29 (1.14) 6 11 (0.4) 16 (0.6) R (0.79) (0.01) 0.2 (0.01) Two,.2 dia. 4 (1.4).4 E9-RSA Retroreflector (Tape Type) 10 (0.9) 8 5 (1.8) (1.0) Four, R1 0.7 (0.0) Adhesive tape Reflecting surface E9-RSB Retroreflector (Tape Type) 5 (1.0) (1.8) 40 (1.57) 8 (1.50) 0.7 (0.0) Adhesive tape Four, R1 Reflecting surface MOUNTING BRACKETS E9-L104 E9-L44 E9-L4 E9-L98 E9-L9 9
10 E9-L104 Mounting Bracket R1.7 R R1 R.5 R (1.14) 16 (0.6) 4.5 (0.) Two,.2 dia With Mounting Bracket (-D62) Optical axis (0.48) 2 (0.12) 29 (1.14) (0.54) 9 (1.54) 7.8 (1.49) R (0.14).2 (0.1) (0.95) (1.00) 42.8 (1.40) (1.69) (0.40) R R1 10 E9-L (0.64) (0.1) R1 R.5.5 (0.14) 14 (0.55).2 dia R1 () R2 2.2 (0.91) 6 (1.42) Optical axis With Mounting Bracket (-D62) 10.4 (0.41) 1.9 (0.55) (0.08) 9.6 (1.60) (1.00) (1.40) (0.12) 2.2 (0.91) 6 (1.42) (0.64) () E9-L4.5 (0.14) 0 (1.).5 (0.14) 7 With Mounting Bracket (-D62) R2 Four,.2 dia. 40 (1.60) 25.4 (1.00) (0.08).5 (0.14) 0 (1.).5 (0.14) R2 1 (0.51) 7.5 R (0.1) (0.24)(0.20) (1.15) Optical axis 5.5 (1.40) (1.87) (1.00) (1.60) (0.51) 10
11 E9-L With Mounting Bracket (-D62) Two, R28 58 dia dia. (1.7) Four, R. Two, R (0.12) (For ) 61 (2.40) 2 48 (1.89) 25.4 (1.00) 20 (0.79) 61 (2.40) 25 (0.98) 6.6 (1.44) 2 Optical axis 25.4 (1.00) 16 (0.6) (2.20) (1.4) 56 (2.20) 4 (1.4) E9-L Optical axis (0.26) (1.89) 24.2 dia. 48 (1.89) 128 (5.04) 21 (8.9) 167 (6.57) 5 (2.09) 29 (1.15) (2.2) 2 46 (1.81) Four, 6.5 dia. 40 (1.57) (1.0) 19 2 (6) 11
12 E9-S7 Slits for -T (Two Pairs; a Total of 6 Slits) A (See Note.) 9.2 (0.6) (0.74) Note: 1. A: 0.5, 1, or 2 dia. 2. Attach an E9-S7 Slit to both the emission panel of the emitter and the receiver s sensing panel of the -T. Detection Distance (Rating) Slit size 0.5 dia. 1 dia. 2 dia. Emitter and receiver 25 mm (0.98) 100 mm (.94) 400 mm (15.75) Receiver Precautions 400 mm (15.75) 800 mm (1.50) 1,500 mm (59.06) POWER SUPPLY The permissible voltage imposed on the must be 24 VDC + 10% maximum (i.e., 26.4 V). Make sure that the voltage imposed on the is correct before turning the on. If a standard switching regulator is used as a power supply, the frame ground (FG) terminal and the ground (G) terminal must be grounded, or the may malfunction due to the switching noise of the power supply. OPERATI OF THE WITH POWER TURNED The is ready to detect objects within 100 ms after the is turned on. If the and the load connected to the each use an independent power supply, be sure to turn on the first and then the load. CNECTI If the input/output lines of the photoelectric sensor are placed in the same conduit or duct as power lines or high-voltage lines, the photoelectric sensor could be induced to malfunction, or even be damaged by electrical noise. Either separate the wiring, or use shielded lines as input/output lines to the photoelectric sensor. The cord connected to the can be extended up to 100 m provided that the diameter of each wire of the cord is 0. mm 2 minimum. WATER RESISTANCE Do not use the in water, in the rain, or outdoors. MOUNTING When mounting the, do not hit the with a hammer, or the will loose watertightness. Use M screws to mount the. Move the up, down, left, and right to find the range where the operating is lit or unlit. Then locate the in the center of the range, and make sure that the stability is lit. PRECAUTIS WHEN USING THE E9-R, E9-RSA, OR E9-RSB REFLECTOR Before applying adhesive tape to the reflector, make sure that the reflector is free from oil or dust, or the adhesive tape will not stick to the reflector properly. Do not cut or scratch the reflector or the reflector will loose watertightness. Do not press the reflector with a metal object or a nail, or the reflector will not function properly.! WARNING The is not a safety component for ensuring the safety of people as defined in EC directive 91/68/EEC, or as covered by separate European standards or by any other regulations or standards. NOTE: DIMENSIS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by OMR ELECTRICS, INC. One East Commerce Drive Schaumburg, IL OMR OMR CANADA, INC. 885 Milner Avenue Scarborough, Ontario M1B 5V Cat. No. CEDSAX 10/99 Specifications subject to change without notice. Printed in U.S.A.
Built-in Amplifier Photoelectric Sensor
Built-in Amplifier Photoelectric Sensor Easy-to-use, Low-cost Photoelectric Sensor Incorporating s that can be clearly seen from a distance Conforms to EN and IEC standards Incorporating polarizing function,
More informationLong Range Metal Body Sensor
R Long Range Metal Body Sensor 30 m Range With Advanced Fuzzy Logic H Mutual interference protection H NPN/PNP switch selectable output H M12 plug-in connector H Meets IP67 and NEMA 4X, 6P H Vibration
More informationConnections Appearance Sensing method Sensing distance Operating mode Model Plug-in connector Horizontal Through-beam 30 m Light-ON
Heavy-duty Plug-in Photoelectric Sensor Water-resistive Photoelectric Sensor with Metal Housing & Plug-in Connector Ensuring Long Sensing Distance Satisfies the requirements of IP67, and NEMA6P. Ensures
More informationLabel Sensor. Ordering Information. Application Example E3S-CD68/CD63. Ideal for Detecting Labels on Bottles. E3S-CD68/CD63 Label Sensor
Ideal for Detecting Labels on Bottles Satisfies the requirements of IP67. Ensures a vibration resistance of 10 Hz to 2 khz and a shock resistance of 1,000 m/s 2 (approximately 100G). Incorporates an NPN
More information10 to 30 VDC (10% max. permissable ripple peak-to-peak)
R Background Suppression Sensor Photoelectric Sensor With Adjustable Setting Distance in Rugged Metal Housing H Stable detection regardless of material color or size of sensing object: 2% or less black/white
More informationE3S-C. Built-in Amplifier Photoelectric Sensor. Water- and Oil-resistive Photoelectric Sensor with Metal Housing Ensuring Long Sensing Distance
Built-in Amplifier Photoelectric Sensor Water- and Oil-resistive Photoelectric Sensor with Metal Housing Ensuring Long Sensing Distance Satisfies the requirements of IP67, NEMA 6P, and IP67G (oil-tight).
More informationOperating mode. distance. 7 m Light ON Dark ON (selectable) 2 m [100 mm] (See note 1.) 100 mm (wide view)
Built-in Amplifier Photoelectric Sensor E3S-A/B Revolutionary High-performance High-quality Sensor with Built-in Amplifier can be adjusted in seconds because the optical axis coincides with the mounting
More informationE3S-A/B. Built-in Amplifier Photoelectric Sensor. Ordering Information. Revolutionary High-performance High-quality Sensor with Built-in Amp
Built-in Amplifier Photoelectric Sensor Revolutionary High-performance High-quality Sensor with Built-in Amp can be adjusted in seconds because the optical axis coincides with the mounting axis. Highly
More informationSensing method Through-beam Retroreflective Diffuse reflective Convergent-beam Appearance Side-view Flat Side-view Flat Side-view
R Subminiature Photoelectric Sensor Omron s Next Generation of Sub-miniature Photoelectric Sensors H Utilizes Omron s Hyper LED technology to achieve the industry s smallest visible red beam H Self-contained
More informationPhotoelectric Sensor
Photoelectric Sensor Revolutionary High-performance High-quality Sensor with Built-in Amp can be adjusted in seconds because the optical axis coincides with the mounting axis. Highly visible spot on white
More informationGeneral-Purpose Photoelectric Sensor
General-Purpose Photoelectric Sensor Wide Selection of High Performance Small DC Sensors Offers Longer Sensing Distances Fast 0. msec response time for high-speed sensing Extended sensing distances up
More informationE3S-BT11 E3S-BR11 E3S-BD11
General Purpose Photoelectric Sensor Miniature DC Sensor with Built-in Amplifier Offers Vertical or Horizontal Single-Screw Mounting H Visible red beam H High-speed sensing, 0.5 ms response time H NEMA
More informationLong Range Metal Body Sensor
R Long Range Metal Body Sensor 30 m Range With Advanced Fuzzy Logic H Mutual interference protection H NPN/PNP switch selectable output H M12 plug-in connector H Meets IP67 and NEMA 4X, 6P H Vibration
More informationUniversal Voltage Cabled Photoelectric E3JK
Universal Voltage Cabled Photoelectric Small Cable Sensor with Complementary Outputs Universal AC/DC supply voltage Relay or NPN/PNP transistor output, light-on or dark-on operation Polarized retroreflective
More informationSensing method Through-beam Retroreflective Diffuse reflective Convergent-beam Appearance Side-view Flat Side-view Flat Side-view
R Subminiature Photoelectric Sensor Omron s Next Generation of Sub-miniature Photoelectric Sensors H Utilizes Omron s Hyper LED technology to achieve the industry s smallest visible red beam H Self-contained
More informationE3Z-LS. Distance-settable Photoelectric Sensor. Ordering Information. Sensors. Accessories (Order Separately)
Distance-settable Photoelectric Sensor Switching between background and foreground suppression (BGS/FGS) enables detecting a variety of objects under various background/foreground conditions. Influence
More informationUltraminiature Photoelectric Switches with Self-contained Amplifier
Ultraminiature Photoelectric Switches with Self-contained Amplifier HPJ Series Fingertip-size, Provided with a various slit attachments. (six types) Fingertip-size 22 x 11 x 8 mm (thru scan model) 30 x
More informationDistance-setting Photoelectric Sensor
Distance-setting Photoelectric Sensor The Combination of the Hyper LED and Shine-proof Achieves both Ease-of-use and High Performance Hyper LED mounted. Finest pin-point beam in the industry allows detection
More informationE3S-CR62/67. Ideal for detecting transparent glass and plastic containers. Transparent bottle sensor. Features
bottle sensor Ideal for detecting transparent glass and plastic containers Features Stable operation even if container interval is shortened for higher productivity. Stable detection of 5 mm gaps that
More informationonlinecomponents.com
Analog Photoelectric Sensor Analog Output Proportional to Light Received, Ideal For Inspection and Measurement Analog object detection ideal for position, size, color and surface characteristics Both analog
More informationHPJSeries HPJ. Ultraminiature Photoelectric Sensors with Self-contained Amplifier
Ultraminiature Photoelectric Sensors with Self-contained Amplifier HPJSeries HPJ Fingertip-size, Provided with a various slit attachments. (six types) Fingertip-size 22 x 11 x 8mm (thru scan model) 30
More informationClass II. Sensing method Appearance Connection Sensing distance Output function Model method NPN output PNP output mm.
Distance-settable Photoelectric Sensor FC-AL Distance-settable Photoelectric Sensor with Background Suppression and Visible Laser Beam Reliable background suppression detection, even of shiny objects Detection
More informationDistance-setting Photoelectric Sensor
Distance-setting Photoelectric Sensor The Combination of the Hyper LED and Shine-proof Achieves both Ease-of-use andhighperformance Hyper LED mounted. Finest pin-point beam in the industry allows detection
More informationEE-SPY311/411/312/412
Accurately Detects Objects Placed in Front of Mirror-like Background A mirror-like background can be used when the distance between the sensor and the background is 20 mm or more Detects an object as small
More informationLED Displacement Sensor
LED Displacement Sensor Low-cost LED Displacement Sensor Offers 10-micron Resolution of 25 mm (0.98 in) with measurement range of ±4 mm (0.16 in). Easy-to-use, built-in amplifier. Fast 5-millisecond response.
More informationSensing method Appearance Sensing distance Operation mode Model. Emitter E3S-2LE4 Through-beam *1. 2 m. 0.1 to 2 m. 300 mm. 2 m
Photoelectric Sensor with Built-in Amplifier CSM DS_E 1 General-purpose Photoelectric Sensor for High Quality and Reliable Detection Be sure to read Safety Precautions on page 8. Ordering Information General-purpose
More informationEE-SPY311/411/312/412
Accurately Detects Objects Placed in Front of Mirror-like Background H A mirror-like background can be used when the distance between the sensor and the background is 20 mm or more H Detects an object
More informationZ4D-F. LED-type Micro Displacement Sensor with Many Features in a Compact Body. Micro Displacement Sensor. Ordering Information.
/ Length Micro Sensor LED-type Micro Sensor with Many Features in a Compact Body Compact body only /4th the volume of our previous product. % cost reduction over our previous product. High performance
More informationGeneral-Purpose Photoelectric Sensors with Self-Contained Amplifier
General-Purpose Photoelectric Sensors with Self-Contained Amplifier HP Series The convenience of industry standards, plus reliability. Effective light axis alignment 50% power savings Prevention of accidental
More informationEE-SPX613. Ordering Information. An Ideal Photomicrosensor for Detecting Liquid Levels in Transparent Pipes
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-110020(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com An Ideal Photomicrosensor for Detecting
More informationCapacitive Proximity Sensor
Capacitive Proximity Sensor Compact and Ideal for Robot Hands and Various Built-in Applications for LCD, Wafer, and PDP (Plasma Display Panel) Detection Flat head is only 5.5-mm thick. Robot Cable ensures
More informationE3S-CL. Distance setting photoelectric sensor in metal housing. Features
Distance setting photoelectric sensor in metal housing High water, oil and detergent resistance Minimal black/white error for highest reliability detecting different colored objects () Features Eliminates
More informationCompact Photoelectric Sensor
CX-00 Photoelectric s Compact Photoelectric The CX-00 series of photoelectric sensors is a wide-ranging lineup of 116 different models. Whatever your application entails, SUNX has covered it with this
More informationSilicon Wafer Mapping Sensor F3M-S. Ordering Information. Application Examples. Allows Simultaneous Mapping of up to 25 Silicon Wafers
R Silicon Wafer Mapping Sensor Allows Simultaneous Mapping of up to 25 Silicon Wafers H Economical, one sensor detects most wafer types, including dummy wafers H Models match wafer sizes of 300 mm, 200
More informationGeneral--Purpose Photoelectric Sensor E3S-C. Ordering Information. Rugged Metal Body DC Sensor with Long Sensing Distance
Sensing Supply voltage Output 30 m 3 m 70 cm, 2 m 10 to 30 VDC 100 ma General--Purpose Photoelectric Sensor Rugged Metal Body DC Sensor with Long Sensing Distance Sensing distance up to six times as long
More informationEE-SPX303/403. Ordering Information. Large Slot Width (13 mm) Not Influenced by External Light. H Easy adjustment and optical axis monitoring
EE-SPX303/403 arge Slot Width (13 mm) Not Influenced by External ight H Easy adjustment and optical axis monitoring with a ight- indicator H Wide operating voltage range (12 to 24 VDC) makes smooth connection
More informationLaser Displacement Sensor Z4M. Ordering Information
Laser Displacement Sensor Compact Displacement Sensor with 1.5-micron Resolution Offers Long-distance Measurement for In-line Production Inspection High resolution with 3 user-selectable response speed
More informationCylindrical Photoelectric Sensor
SERIES Cylindrical Photoelectric Amplifier Built-in Cylindrical type easily mountable with M Conforming to EMC Directive AC supply type conforms to Low Voltage Directive, too. ( ) UL Recognition M This
More informationSensing method Appearance Sensing distance Operation mode Model Convergent-reflective (narrow vision field) 30 to 100 mm (variable)
Photoelectric Sensor with Built-in Amplifier CSM DS_E_11_1 General-purpose Photoelectric Sensor for High Quality and Reliable Detection Be sure to read Safety Precautions on page 8. Note: -2/-/-DS10/-DS30/-R2
More informationEasy to replace. A pigtailed type sensor with connector (CY- -J), which is easy to replace, is also available. Environment resistant
EQ- VF NX PM PM MS-AJ RT-6 PX- PHOTOELECTRIC SENSORS Mounting Stand SERIES Cylindrical Photoelectric Test input PNP output Light intensity type available monitor M This sensor has an M size for convenient
More informationEE-SX770/771/772/870/871/872(A/P/R)
EE-SX770/771/772/870/871/872(A/P/R) Thin, Compact Photomicrosensor with Attached Cable H Next generation design available with NPN or output H Allows standard M3-screw mounting H Twenty-four models available
More informationSolid-State Timer. ON-delay, Repeat cycle/signal OFF start, Repeat cycle/signal ON start, Signal ON/OFF-delay, Signal OFF-delay, and Interval
Solid-State Timer Analog Set Multifunction Timers in Slim Design for Track Mounting All settings are made though front panel Six operating modes in a single timer provides flexibility for many applications
More informationTL-W. Standard Flat Inductive Proximity Sensors. Ordering Information. Front and side facing surface IP67 DC 2-wire and DC 3-wire models
Standard Flat Inductive Proximity Sensors Front and side facing surface IP67 DC -wire and DC -wire models Ordering Information DC -wire Models Shape distance Model Output and operating status mm MD1 *1
More informationPhotoelectric Sensors with Separate Digital Amplifiers (Laser-type Amplifier Units) E3C-LDA Series
Photoelectric Sensors with Separate Digital Amplifiers (Laser-type Amplifier Units) E3C-LDA Series All three beam types provide ample long-distance detection of 1,000 mm for Diffuse Reflective Models.
More informationE3X-NL. Employs OMRON's Unique Free Angle Optics Technology for Detecting Minute Differences in Glossiness. Optical Fiber Glossy Object Sensor
Authorised Distributors:- AS & AAIN INDIA PVT TD S-1, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-112(India) Tel : 11-43797575 Fax : 11-43797574 E-mail : sales@ashalain.com Fiber Glossy Object
More informationParallel Beam Linear Sensor
Parallel Beam Linear Sensor Visible Red Class II Laser Width/Profile Measurement Sensor Providing High-Speed Precision Measurement with Flexible Operation H FDA Class II IEC Class 2 visible red laser ensures
More informationIncremental Rotary Encoder E6B2
Incremental Rotary Encoder General-Purpose Rotary Encoder Withstands arge Shaft oads Wide variety of supply voltages and output forms Easy-to-adjust zero index (phase Z) with origin indicating function
More informationLaser Photoelectric Sensor
Laser Photoelectric Sensor Prewired DC Sensor Provides Long- Distance Sensing of Objects as Small as 0.1 mm Detect small objects over longer sensing distances with highly accurate positioning Attachable
More informationAbsolute Rotary Encoder
Absolute Rotary Encoder Use the Tough (Rated IP64 for Degree of Protection) Combined with a PLC or Cam Positioner for Optimum Control and Ease-of-Use Incorporates a sealed bearing, meeting IP64 for durability
More informationE3Z. 30 m. 20 cm. 4 m. 1 m. Compact Photoelectric Sensor with Built-in Amplifier
Compact Photoelectric Sensor with Built-in Amplifier EZ CSM_EZ_DS_E The Standard for Photoelectric Sensors with a Secure Track Record of One Million Sold early. Long sensing distance of m for Through-beam
More informationonlinecomponents.com
Photoelectric Sensor with Built-in Amplifier (Ultracompact and Thin Type) ET Photoelectric Sensor with Built-in Amplifier Contributes to Equipment Downsizing CSM_ET_DS_E Ultracompact and Thin Photoelectric
More informationAmplifier-separated Manual Sensitivity Setting Photoelectric Sensor
-separated Manual Sensitivity Setting Photoelectric Sensor Twin Adjuster Enables Delicate Sensitivity Setting Twin Adjuster Its twin adjuster enables easy optimum setting to suit the application. Twin
More informationUSER S MANUAL. EX-20 Series. Amplifier Built-in Ultra-compact Type Photoelectric Sensor
Amplifier Built-in Ultra-compact Type Photoelectric Sensor EX-20 Series USER S MANUAL WUME-EX20-3 Contens 1. Cautions 3 2. Part Description 4 3. Mounting 6 3-1 Mounting the sensor 6 3-2 Mounting to sensor
More informationSelf-contained Photoelectric Sensors PZ2 Series
Self-contained PZ Series Features World s smallest photoelectric sensors Excellent mirror surface detection IP-7 rated waterproof can operate side by side Detecting Distance Thrubeam 7, Retro-reflective
More informationHigh Speed Response Type With Built-in Output Protection Circuit
High Speed Response Type With Builtin Output Protection Circuit Features Reverse power polarity and overcurrent High speed response: Max. ms ight /Dark mode selectable by control wire Builtin the sensitivity
More informationE2F. Cylindrical Proximity Sensor in Plastic Housing. Applications. Ordering Information. Sensors. Accessories (Order Separately)
Cylindrical Proximity Sensor in Plastic Housing High quality full body plastic housing for high water proof requirements Polyarylate housing for light chemical resistance Applications Detection of bottle
More informationPre-wired Photomicrosensor with Amplifier and Cable EE-SPW321/421 Compact, Thin-profile Photomicrosensor with special amplifier.
Pre-wired Photomicrosensor with Amplifier and Cable CSM_EE-SPW1_41_DS_E_5_ Compact, Thin-profile Photomicrosensor with special amplifier. Slim amplifier ( 7.5 1 mm) can be handled like a cable. Provided
More informationLight-ON/Dark-ON* Approx. 3.5 g EE-SY671
Reflective Photomicrosensor with Sensitivity Adjuster Easy adjustment with a built-in sensitivity adjuster Models with the sensing window located on the top or side of the body ight- and Dark- selectable
More informationHPA Series. Self-contained Photoelectric Controls with High Functions. Specifications CLICK FEATURES ORDER GUIDE. Pre-leaded type (2m lead)
6 HPA Series Specifications Self-contained Photoelectric Controls with Functions FEATURES Strobe Light Emission, Margin Regulation, Front Incoming Light Display, and Output Inhibit Functions Allow Sensing
More informationEmitting and receiving element pitch: 10 mm in
Small / Slim Object Detection Area Sensor Cross-beam scanning system to detect slim objects Letter or visiting card detectable! Slim objects can be detected by using the cross-beam scanning system. Emitting
More informationHigh Speed Response Type With Built-in Output Protection Circuit
Amplifier Builtin Type By Side High Speed Response Type With Builtin Output Protection Circuit Features Reverse power polarity and overcurrent High speed response: Max. ms ight /Dark mode selectable by
More informationTwin adjuster enables delicate sensitivity setting
PHOTOELECTRIC SENSORS Manually Sensitivity Set Photoelectric Sensor Amplifier-separated Diagnosis Self-diagnosis Timer Light intensity monitor Interference prevention CHX-SC SU-7/SH Twin adjuster enables
More informationPhotoelectric Switches for Harsh Environments
Photoelectric Switches for Harsh Environments HP8 Series For even harsher environments Die-cast housing for strength and shock resistance High-performance seal Resistance to the most advanced cutting oils
More informationRemote Sensor Amplifier Terminal
9 Remote Sensor Amplifier Terminal Plug-in Sensor Amplifiers with Direct CompoBus/S Terminal Connections 1 SRT1 models support only high-speed communications systems 1 4-point terminals expand to 8 points
More informationOpaque materials of Min. Ø60mm. Hysteresis - Max. 10% at rated setting distance
Small and light, common type Features Easy to mount at a narrow space with small size and light weight. Convenient to adjust the sensitivity by external sensitivity adjustment control.(diffuse reflective
More informationSS-A5 SERIES SH SERIES
395 Manually Sensitivity Set Photoelectric Sensor SS-A5 SERIES SH SERIES Amplifi er-separated General terms and conditions... P.1 Sensor selection guide...p.11~ / P.9~ Related Information SH Specifications
More informationLong sensing range. Most suitable for conveyor lines and parking lot applications. 10 m ft (Red LED)
SERIES Compact Multi-voltage Photoelectric Multi-voltage Interference prevention Multi-voltage The series can operate a to 2 V AC or to 2 V DC, which makes it suitable for supply voltages all over the
More informationFEATURES. 15 m ft. 4 m ft. 2 m ft. 100 mm in. 600 mm in. 15 m ft. 4 m ft. 2 m ft. 100 mm 3.
273 Cylindrical Photoelectric Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1549~ guide... P.231~ General precautions... P.1552~ PHOTO PHOTO MEASURE -LS200
More informationStandard type. Basic type. 1 Stability indicator (green) 2 Operation indicator (orange) 4 Operation mode switch. 5 Power indicator (green)
INSTRUCTIS Compact Photoelectric Sensor CX-00 Series MEUEN-CX00 V. Thank you for purchasing products from Panasonic. Please read this Instruction Manual carefully and thoroughly for the correct and optimum
More informationInductive Proximity Sensor
Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-600 032 Ph: +91 44 4353 8888 Fax: 044 4353 7888 E-mail: info@intechchennai.com Website: www.intechchennai.com distance Supply voltage
More informationMLV40 Series Miniature Sensors
MLV4 Series Miniature Sensors Diffuse Mode See page 54 Features: Adjustable sensitivity Complementary outputs Sensing Range: 5 mm Outputs: NPN, PNP Thru-Beam Mode See page 57 Rugged metal housing Compact
More informationTriple Beam Adjustable Range Reflective Photoelectric Sensor Amplifier Built-in
377 PHOTO PHOTO USE MEASUREMENT STATIC CONTROL Triple Beam Adjustable Range Reflective Photoelectric SERIES Related Information General terms and conditions... F-17 Glossary of terms... P.1359~ selection
More information4. Output N: NPN P: PNP
Sensor SALIENT FEATURES Upto 25m sensing Sensitivity Adjustable Light On/Dark On selectable Mutual Interference Prevention Compact; IP65 ( -2M)/ IP67 ( -M8C) Measurement Vision & Safety Model Number Legend
More informationRectangular Proximity Sensor
Rectangular Proximity Sensor A Variety of Models Available for a Wide Range of Applications ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-110020(India) Tel : 011-43797575
More informationRemote Sensor Amplifier Terminal
9 Remote Sensor Amplifier Terminal Plug-in Sensor Amplifiers with Direct CompoBus/S Terminal Connections 1 SRT1 models support only high-speed communications systems 1 4-point terminals expand to 8 points
More informationTriple Beam Adjustable Range Reflective Photoelectric Sensor Amplifier Built-in. panasonic.net/id/pidsx/global
337 Triple Beam Adjustable Range Reflective Photoelectric SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1549~ guide... P.231~ General precautions... P.1552~ PHOTO
More informationAmplifier Built-in Cylindrical Photoelectric Sensor
PHOTOEECTRIC SENSORS EQ- SERIES Amplifier Built-in Cylindrical Photoelectric Cylindrical Type Easily Mountable with M Thread - Marked Conforming to EMC Directive AC supply type conforms to ( ow Voltage
More informationHigh-precision Optical Switch
High-precision Optical Switch Optical System Achieves 1-mm Operating Position Repeatability in this 4-way Switch A knife-edge mechanism in the optical system provides greater precision for a more stable
More informationSensing method Sensing distance Model
Sensing distance Supply voltage 12 to 24 VDC 3 to 10 cm, 5 to 25 cm 80 ma 100 ma Photoelectric Sensor Focusable Sensors with Built-in DC Amplifiers Pinpoint focusable and area focusable models eliminate
More informationCYLINDRICAL TYPE PHOTOELECTRIC SENSORS. Easy to Replace. The sensor with a connector (UZC---A) makes its replacement easy. Environment Resistant
CYINDRICA TYPE PHOTOEECTRIC SENSORS UZC Series SIMPE MOUNTING WITH A M8 THREAD M8 Thread This sensor has a M8 thread on an enclosure, which is convenient for mounting. Easy to Replace The sensor with a
More informationE3JM/E3JK. Two Models Contribute to Overall Cost Reduction. Built-in Power Supply Photoelectric Sensor. Ordering Information
Built-in Power Supply Photoelectric Sensor EJM/ CSM_EJM DS_E Two Models Contribute to Overall Cost Reduction EJM Terminal Block Models Easy to wire and adjust. Pre-wired Models Slim body is economically
More informationTriple Beam Adjustable Range Reflective Photoelectric Sensor Amplifier Built-in
371 Triple Beam Adjustable Range Reflective Photoelectric SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.1455~ selection guide... P.271~ General precautions... P.1458~
More informationInductive Proximity Sensor
Inductive Proximity Sensor Linear Proximity Sensor with High-accuracy Resolution Resolution is 0.05% of the maximum sensing distance. The model with a sensing distance of 1.2 mm ensures a resolution of
More informationUltra-slim Body Picking Sensor NA1-PK5 SERIES NA1-5 SERIES. Even a slim hand is detectable by the 25 mm in pitch beam area sensor
473 PHOTO PHOTO Ultra-slim Sensor NA-PK5 SERIES SERIES General terms and conditions... F-7 Sensor selection guide... P.4~ Related Information Glossary of terms... P.455~ General precautions... P.458~ Conforming
More informationSPECIFICATIONS Type Catalog listing Power supply Consumption current Detecting distance Focal distance Focal spot diameter Operation mode
Long-Distance Detection Laser Sensors Model High-accuracy detection of very small targets using the direct reflection method. Detecting a long distant and very small spot. Switching output type: 0.1 mm
More informationLaser Displacement Sensor
Laser Displacement Sensor Visible Beam Laser Displacement Sensor Provides High Precision Resolution, Speedy Set-Up and Eliminates Need for the Z49 Laser Safety Kit FDA, IEC Class II Laser; no additional
More informationHigh Reliability Of Fiber Optic Amplifier For Convenient Mounting
Amplifier Reliability Of Amplifier For Convenient Mounting Features speed response: Max. 0.5ms Auto (Button setting)/remote synchronization input, mutual interference protection, selfdiagnosis Reverse
More informationCustomized HP100 Sensors. HP300 Series. Customized to solve difficult application problems
Customized HP00 Sensors HP00 Series Customized to solve difficult application problems The HP00 Series: Are you faced with any of these problems? Tightly mounted thru-scan sensors interfere with each other,
More informationBJ7M-TDT. BJ3M-PDT-C-P Polarized
Compact And ong Distance Type Features ong distance type High performance lens with long distance Throughbeam type: m Diffuse reflective type: 1m Polarized retroreflective type: m (MS2A) M.S.R. (Mirror
More informationProduct Discontinuation Notices
PRODUCT NEWS Product Discontinuation Notices August 1, 2011 Ultrasonic Sensors No. 2011264E Discontinuation Notice of Ultrasonic Sensor E4A special specification model, E4B special specification model,
More informationUltra-slim Body Picking Sensor NA1-PK5 SERIES NA1-5 SERIES. Even a slim hand is detectable by the 25 mm in pitch beam area sensor
487 Ultra-slim Sensor NA-PK5 SERIES SERIES General terms and conditions... F-7 Sensor selection guide... P.475~ Related Information Glossary of terms... P.359~ General precautions... P.45 PHOTO PHOTO Conforming
More informationNA1-PK3 SERIES. Compact Size Picking Sensor. Boasts a compact, pocket lighter size enabling universal installation
44 PHOTO PHOTO Compact Size Sensor NA-PK SERIES Related Information General terms and conditions... F- Glossary of terms... P.549~ guide... P.49~ General precautions...p.55~ Recognition Make sure to use
More informationUltramini clever reliability in confined quarters. Simple installation and operation
Series OU Ultramini clever reliability in confined quarters m Through-beam sensors OUS/OUE up to, m Retro-reflective sensors OUR up to, m Retro-reflective sensors with polarizing filters OUP and OUC up
More informationNA1-PK3 SERIES. Compact Size Picking Sensor. Boasts a compact, pocket lighter size enabling universal installation
497 Compact Size Sensor NA-PK SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.59~ Sensor selection guide... P.475~ General precautions...p.5 PHOTO PHOTO Conforming
More informationIndustry's standard of transparent object detection sensor
412 Stainless protector/small type series SR-Q series Industry's standard of transparent object detection sensor Stable detection even at close distances Visible red spot light KR-Q series Narrow view
More informationCX-20 SERIES. General purpose photoelectric sensor with full basic performance. Compact Photoelectric Sensor OTHER SUNX PRODUCTS
OTHER SUNX PRODUCTS CX- SERIES Compact Photoelectric Diagnosis Self-diagnosis PNP output Light intensity Interference type available monitor prevention Amplifier Built-in UL Recognition General purpose
More informationNA DigiParts GmbH. Small / Slim Object Detection Area Sensor
953 PHOTO PHOTO MEASURE ITY Object Area Sensor General terms and conditions... F-7 Related Information Glossary of terms... P.1455~ Cross-beam scanning system to detect slim objects Letters or business
More informationGeneral-Purpose Photoelectric Switches with Self-Contained Amplifier
General-Purpose Photoelectric Switches with Self-Contained Amplifier HP7 Series Wide range of configurations and specifications Improved resistance to interference (e.g., fluorescent lights) Threaded metal
More informationOutput configuration. Dark-ON. Light-ON. Dark-ON. Light-ON. Dark-ON. Light-ON
ASH & ALAIN INDIA PVT LTD S-00, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-000(India) Tel : 0-797575 Fax : 0-79757 E-mail : sales@ashalain.com Photomicrosensor with Cable (Non-modulated) Slim,
More informationNA1-11. Small / Slim Object Detection Area Sensor. Cross-beam scanning system to detect slim objects. Letters or business cards detectable!
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
More information