W 160T: With the smallest LED light spot

Transcription

1 W 0T: With the smallest LED light spot BGS Photoelectric proximity switches Photoelectric proximity switches mark sensor Photoelectric proximity switches energetic Photoelectric reflex switches SSystem focal points are small, precise light spot for small objects, including transparent ones, and highspeed applications. Teach-In function external or at the push of a button with high precision simplifies handling. Sturdy, sealed-in housing enables use even under difficult ambient conditions. The W0T even fits in small spaces thanks to its compact design. This makes it especially easy to mount. All W 0T variants are available in two housing models with axial or 90 light emission. WT 0T ark, the spot sensor for fast detection of color contrasts. It resolves ten gray levels and color changes in the spectral range HKS N to 88 N. WTB 0T BGS in two variants with precise background suppression: it focuses at a range of up to 0 mm or larger ranges up to 0 mm with additional Teach-In mode for shiny and irregular surfaces. WL 0T, the photoelectric reflex switch with red light and m scanning rage is ideal for detecting smaller and (semi-)transparent objects. WTF 0T Focus, an energetic scanner with focused light beam for detecting contrasts and smaller parts over larger distances. WTE 0T Energetic, an energetic scanner with large scanning ranges, available in infrared and red light models. The W 0T devices are especially successful in the application fields: Electronics and semiconductor manufacturing Packaging and graphic arts industries Assembly and handling (Pick & Place) Special mechanical engineering tasks Conveyor systems D ATA SHE

2 W 0T WTB 0T BGS detects the presence of washers, gasket rings and o-rings. The focused photoelectric proximity switch WTF 0T checks the orientation of a groove in a vacuum chamber over a large distance. onitoring of tool imprints, e.g., in printed circuit board manufacturing. The WTB 0T BGS detects the smallest drills reliably down to 0. mm diameter. The WL 0T photoelectric proximity switch detects the position of bundles of sheet metal and individual sheets of a rotor. The WT 0T ark photoelectric proximity switch distinguishes the front and back sides of components in a vibration conveyor.

3 Teach-In -point Teach-In: -point Teach-In: Position Teach-In nd Point Teach-In Condition st Point x x x Background will just not be detected. Sensitivity aligned to the center between the two Teach-In points. Object will just be detected. Dark mark will just not be detected. Sensitivity aligned to the center between the two Teach-In points. Light mark will just be detected. Reflector is detected with reserve. Sensitivity aligned to the center between the two Teach-In points. Reflector is detected without reserve. Application Status x

4 WTB 0T Photoelectric Proximity Switch, Background Suppression, Focused Scanning distance 0 mm Photoelectric proximity switch Very small light spot Precise background suppression and great sensitivity Detects the smallest objects LED indicator: function reserve Dimension illustration Setting options All types TEACH Optics center, receiver Optics center, transmitter Plug pin/ pin, 8 or connection cable Teach-In button Light/dark rotary switch: L = light switching D = dark switching Orange LED indicator: switching output active Green LED indicator: light reception with operating reserve >. L.ON D.ON C Connection type WTB OT-P WTB OT-N WTB OT-F WTB OT-E WTB OT-P WTB OT-N WTB OT-F WTB OT-E WTB OT-P WTB OT-N WTB OT-F WTB OT-E Accessories Connectors ounting systems x 0. mm pin, 8 pin, 8 brn blu blk gra L+ L+ L+

5 WTB 0T HGA, focused Technical data WTB 0T- P ) /F ) P ) /F ) P ) /F ) N ) /E ) N ) /E ) N ) /E ) Scanning distance...0 mm ) Sensitivity control External Teach () Light source ) LED, red light Supply voltage V S V DC ) Ripple ) ±0% Current consumption ) 0 ma Switching outputs PNP, open collector: NPN, open collector: Output current I A max. 00 ma Light receiver, switching type Light/dark switching per rotary switch Response time 8) /switching freq. max. 9) 0. ms / 0/s Connection type: cable PVC, m 0) ; x 0. mm, l. mm pin, 8 pin, 8 VDE protection class III Circuit protection ) A, B, C, D Enclosure rating IP Ambient temperature Operation...+ C Storage C Weight With cable / m approx. 0 g With approx. 0 g Housing material Housing: PBT; Optic: PA ) Housing form: horizontal ) Housing form: vertical ) Object with 90% reflectance (with reference to standard white according to DIN 0) ) Average service life 00,000 h at T U = + C ) Limit values ) ust be within V S tolerances ) Without load 8) With resistive load 9) With light/dark ratio : 0) m are available on request, do not bend cable below 0 C ) A=V S connections reverse-polarity B = Inputs and outputs reversepolarity C = Interference suppression D = Outputs overcurrent and short-circuit Scanning distance (mm) Operation distance Scanning range on white, 90 % reflectance Scanning range on grey, 8 % reflectance Scanning range on black, % reflectance % of scanning distance %/90%.0 WTB 0T BGS 8%/90% 90%/90%. 0 (mm) Order information WTB OT-P WTB OT-P WTB OT-P WTB OT-N WTB OT-N WTB OT-N WTB OT-F WTB OT-F WTB OT-F WTB OT-E WTB OT-E WTB OT-E Light spot diameter WTB 0T HGA Ø. mm Ø. mm Ø. mm Sensor Distance [mm]

6 WTB 0T Photoelectric Proximity Switch, Background Suppression Scanning distance 0 0 mm Photoelectric proximity switch Large scanning distance (0 mm) Additional Teach-In mode for shiny and structured surfaces LED indicator: function reserve Dimension illustration Setting options All types TEACH Optics center, receiver Optics center, transmitter Plug pin/ pin, 8 or connection cable Teach-In button Light/dark rotary switch: L = light switching D = dark switching Orange LED indicator: switching output active Green LED indicator: light reception with operating reserve >. L.ON D.ON C Connection type WTB OT-P WTB OT-N WTB OT-F WTB OT-E WTB OT-P WTB OT-N WTB OT-F WTB OT-E WTB OT-P WTB OT-N WTB OT-F WTB OT-E Accessories Connectors ounting systems x 0. mm pin, 8 pin, 8 brn blu blk gra L+ L+ L+

7 WTB 0T Technical data WTB 0T- P ) /F ) P ) /F ) P ) /F ) N ) /E ) N ) /E ) N ) /E ) Scanning distance mm ) Sensitivity control External Teach () Light source ) LED, red light Supply voltage V S V DC ) Ripple ) ±0% Current consumption ) ma Switching outputs PNP, open collector: NPN, open collector: Output current I A max. 00 ma Light receiver, switching type Light/dark switching per rotary switch Response time 8) /switching freq. max. 9). ms / 00/s Connection type: cable PVC, m 0) ; x 0. mm, l. mm pin, 8 pin, 8 VDE protection class III Circuit protection ) A, B, C, D Enclosure rating IP Ambient temperature Operation...+ C Storage C Weight With cable / m approx. 0 g With approx. 0 g Housing material Housing: PBT; Optic: PA ) Housing form: horizontal ) Housing form: vertical ) Object with 90% reflectance (with reference to standard white according to DIN 0) ) Average service life 00,000 h at T U = + C ) Limit values ) ust be within V S tolerances ) Without load 8) With resistive load 9) With light/dark ratio : 0) m are available on request, do not bend cable below 0 C ) A=V S connections reverse-polarity B = Inputs and outputs reversepolarity C = Interference suppression D = Outputs overcurrent and short-circuit Condition Teach-In FGS Teach-In x % of scanning distance Scanning distance 0 WTB 0T 0 8%/90% 0 %/90% 90%/90% 0 (mm) Order information WTB OT-P WTB OT-P WTB OT-P WTB OT-N WTB OT-N WTB OT-N WTB OT-F WTB OT-F WTB OT-F WTB OT-E WTB OT-E WTB OT-E Status A Light spot diameter WTB 0T Ø mm Ø mm Ø 0 mm Sensor Object in A area is detected Distance [mm]

8 WT 0T Photoelectric Proximity Switch, ark Sensor Scanning distance 0 mm Photoelectric proximity switch ark sensor Enclosure rating: IP Resolves ten gray levels LED indicator: function reserve Dimension illustration Setting options All types TEACH L.ON D.ON Optics center, receiver Optics center, transmitter Plug pin/ pin, 8 or connection cable Teach-In button Light/dark rotary switch: L = light switching D = dark switching Orange LED indicator: switching output active Green LED indicator: light reception with operating reserve >. C Connection type WT OT-P 9 WT OT-P 9 WT OT-N 9 WT OT-N 9 WT OT-F 9 WT OT-F 9 WT OT-E 9 WT OT-E 9 WT OT-P 9 WT OT-N 9 WT OT-F 9 WT OT-E 9 Accessories Connectors ounting systems x 0. mm pin, 8 pin, 8 brn blu blk gra L+ L+ L+ 8

9 WT 0T ark Technical data WT 0T- P ) /F ) 9 P ) /F ) 9 P ) /F ) 9 N ) /E ) 9 N ) /E ) 9 N ) /E ) 9 Scanning distance 0 ± mm Sensitivity control External Teach () Light source ) LED, green light Light spot diameter Approx. x mm at 0 mm distance Transmitter dispersion angle Focused, Focus 0 mm Supply voltage V S V DC ) Ripple ) ±0% Current consumption ) 0 ma Switching outputs PNP, open collector: NPN, open collector: Output current I A max. 00 ma Light receiver, switching type Light/dark switching per rotary switch Response time ) /switching freq. max. 8) 0. ms / 00/s Connection type: cable PVC, m 9) ; x 0. mm, l. mm pin, 8 pin, 8 VDE protection class III Circuit protection 0) A, B, C, D Enclosure rating IP Ambient temperature Operation...+ C Storage C Weight With cable / m approx. 0 g With approx. 0 g Housing material Housing: PBT; Optic: PA ) Housing form: horizontal ) Housing form: vertical ) Average service life 00,000 h at T U = + C ) Limit values ) ust be within V S tolerances ) Without load ) With resistive load 8) With light/dark ratio : 9) m are available on request, do not bend cable below 0 C 0) A=V S connections reverse-polarity B = Inputs and outputs reversepolarity C = Interference suppression D = Outputs overcurrent and short-circuit Color detection Detection of color changes in the spectral range HKS ) N (violet) to 88 N (black) from % to 00 %. The orange LED or the green and orange LEDs light when there is detection. The following are not resolved: N ( %)/88 N ( %), N ( %)/ N ( %), N ( %)/ N ( %), N (0 %)/ N ( %), N ( %)/ N ( %), N ( %)/8 N ( %), N (0 %)/ N ( %), and N ( %)/ N ( %). 88 N: black N: brown N: red 8 N: orange N: yellow N: green N: light blue N: dark blue N: violet ) HKS =^ Hostmann-Steinberg, K+E printing inks, Schminke & Co. HKS colors are printing inks, which were developed by the above-mentioned companies, to guarantee the precise reproducibility of a color. They are standard in the graphic arts industry. HKS-N stands for uncoated paper in offset and letterpress printing with a color spectrum of (yellow) to 9 (black). The color scale is available from SICK upon request. : Scanning distance Scanning range on white, 90 % reflectance Scanning range on grey, 8 % reflectance Scanning range on black, % reflectance 00 0 Function reserve (mm) 0 0 Order information WT OT-P 9 WT OT-P 9 WT OT-P 9 WT OT-N 9 WT OT-N 9 WT OT-N 9 WT OT-F 9 WT OT-F 9 WT OT-F 9 WT OT-E 9 WT OT-E 9 WT OT-E

10 WTF 0T Photoelectric Proximity Switch, Focused Optic Scanning distance 00 mm Photoelectric proximity switch Detects small objects and contrast differences at a large distance (00 mm) Focused light beam LED indicator: function reserve Dimension illustration Setting options All types TEACH Optics center, receiver Optics center, transmitter Plug pin/ pin, 8 or connection cable Teach-In button Light/dark rotary switch: L = light switching D = dark switching Orange LED indicator: switching output active Green LED indicator: light reception with operating reserve >. L.ON D.ON C Connection type WTF OT-P WTF OT-N WTF OT-F WTF OT-E WTF OT-P WTF OT-N WTF OT-F WTF OT-E WTF OT-P WTF OT-N WTF OT-F WTF OT-E Accessories Connectors ounting systems x 0. mm pin, 8 pin, 8 brn blu blk gra L+ L+ L+ 0

11 WTF 0T Technical data WTF 0T- P ) /F ) P ) /F ) P ) /F ) N ) /E ) N ) /E ) N ) /E ) Scanning distance...00 mm ) Sensitivity control External Teach () Light source ) LED, red light Supply voltage V S V DC ) Ripple ) ±0% Current consumption ) 0 ma Switching outputs PNP, open collector: NPN, open collector: Output current I A max. 00 ma Light receiver, switching type Light/dark switching per rotary switch Response time 8) /switching freq. max. 9) 0. ms / 000/s Connection type: cable PVC, m 0) ; x 0. mm, l. mm pin, 8 pin, 8 VDE protection class III Circuit protection ) A, B, C, D Enclosure rating IP Ambient temperature Operation...+ C Storage C Weight With cable / m approx. 0 g With approx. 0 g Housing material Housing: PBT; Optic: PA ) Housing form: horizontal ) Housing form: vertical ) Object with 90% reflectance (with reference to standard white according to DIN 0) ) Average service life 00,000 h at T U = + C ) Limit values ) ust be within V S tolerances ) Without load 8) With resistive load 9) With light/dark ratio : 0) m are available on request, do not bend cable below 0 C ) A=V S connections reverse-polarity B = Inputs and outputs reversepolarity C = Interference suppression D = Outputs overcurrent and short-circuit Scanning disatance (mm) Operation distance Scanning range on white, 90 % reflectance Scanning range on grey, 8 % reflectance Scanning range on black, % reflectance 00 0 Function reserve (mm) WTF 0T 0 00 Order information WTF OT-P WTF OT-P WTF OT-P WTF OT-N WTF OT-N WTF OT-N WTF OT-F WTF OT-F WTF OT-F WTF OT-E WTF OT-E WTF OT-E Light spot diameter WTF 0T Ø. mm Ø. mm Ø mm Ø.8 mm Sensor Distance [mm]

12 WTE 0T Photoelectric Proximity Switch, Energetic Red Light Scanning distance 0 00 mm Photoelectric proximity switch Large scanning distance Red light variant for standard applications LED indicator: function reserve Dimension illustration Setting options All types TEACH Optics center, receiver Optics center, transmitter Plug pin/ pin, 8 or connection cable Teach-In button Light/dark rotary switch: L = light switching D = dark switching Orange LED indicator: switching output active Green LED indicator: light reception with operating reserve >. L.ON D.ON C Connection type WTE OT-P WTE OT-N WTE OT-F WTE OT-E WTE OT-P WTE OT-N WTE OT-F WTE OT-E WTE OT-P WTE OT-N WTE OT-F WTE OT-E Accessories Connectors ounting systems x 0. mm pin, 8 pin, 8 brn blu blk gra L+ L+ L+

13 WTE 0T RT Technical data WTE 0T- P ) /F ) P ) /F ) P ) /F ) N ) /E ) N ) /E ) N ) /E ) Scanning distance mm ) Sensitivity control External Teach () Light source ) LED, red light Supply voltage V S V DC ) Ripple ) ±0% Current consumption ) 0 ma Switching outputs PNP, open collector: NPN, open collector: Output current I A max. 00 ma Light receiver, switching type Light/dark switching per rotary switch Response time 8) /switching freq. max. 9) 0. ms / 000/s Connection type: cable PVC, m 0) ; x 0. mm, l. mm pin, 8 pin, 8 VDE protection class III Circuit protection ) A, B, C, D Enclosure rating IP Ambient temperature Operation...+ C Storage C Weight With cable / m approx. 0 g With approx. 0 g Housing material Housing: PBT; Optic: PA ) Housing form: horizontal ) Housing form: vertical ) Object with 90% reflectance (with reference to standard white according to DIN 0) ) Average service life 00,000 h at T U = + C ) Limit values ) ust be within V S tolerances ) Without load 8) With resistive load 9) With light/dark ratio : 0) m are available on request, do not bend cable below 0 C ) A=V S connections reverse-polarity B = Inputs and outputs reversepolarity C = Interference suppression D = Outputs overcurrent and short-circuit Scanning distance (mm) Operation distance Scanning range on white, 90 % reflectance Scanning range on grey, 8 % reflectance Scanning range on black, % reflectance Function reserve 0 (mm) Order information WTE 0T RT WTE OT-P WTE OT-P WTE OT-P WTE OT-N WTE OT-N WTE OT-N WTE OT-F WTE OT-F WTE OT-F WTE OT-E WTE OT-E WTE OT-E Light spot diameter WTE 0T R Ø mm Ø mm Ø mm Sensor Distance [mm]

14 WTE 0T Photoelectric Proximity Switch, Energetic Infrared Light Scanning distance 0 m Photoelectric proximity switch Large scanning distance Infrared variant for objects with low reflectance LED indicator: function reserve Dimension illustration 9,,, 9, 8 0, 9,, 8, 8, 0, 9,, Setting options All types TEACH Optics center, receiver Optics center, transmitter Plug pin/ pin, 8 or connection cable Teach-In button Light/dark rotary switch: L = light switching D = dark switching Orange LED indicator: switching output active Green LED indicator: light reception with operating reserve >. L.ON D.ON C Connection type WTE OT-P WTE OT-N WTE OT-F WTE OT-E WTE OT-P WTE OT-N WTE OT-F WTE OT-E WTE OT-P WTE OT-N WTE OT-F WTE OT-E Accessories Connectors ounting systems x 0. mm pin, 8 pin, 8 brn blu blk gra L+ L+ L+

15 WTE 0T IR Technical data WTE 0T- P ) /F ) P ) /F ) P ) /F ) N ) /E ) N ) /E ) N ) /E ) Scanning distance 0... m ) Sensitivity control External Teach () Light source ), Lichtart LED, infrared light Supply voltage V S V DC ) Ripple ) ±0% Current consumption ) 0 ma Switching outputs PNP, open collector: NPN, open collector: Output current I A max. 00 ma Light receiver, switching type Light/dark switching per rotary switch Response time 8) /switching freq. max. 9) 0. ms / 000/s Connection type: cable PVC, m 0) ; x 0. mm, l. mm pin, 8 pin, 8 VDE protection class III Circuit protection ) A, B, C, D Enclosure rating IP Ambient temperature Operation...+ C Storage C Weight With cable / m approx. 0 g With approx. 0 g Housing material Housing: PBT; Optic: PA ) Housing form: horizontal ) Housing form: vertical ) Object with 90% reflectance (with reference to standard white according to DIN 0) ) Average service life 00,000 h at T U = + C ) Limit values ) ust be within V S tolerances ) Without load 8) With resistive load 9) With light/dark ratio : 0) m are available on request, do not bend cable below 0 C ) A=V S connections reverse-polarity B = Inputs and outputs reversepolarity C = Interference suppression D = Outputs overcurrent and short-circuit Tastweite (mm) Operation distance Scanning range on white, 90 % reflectance Scanning range on grey, 8 % reflectance Scanning range on black, % reflectance 00 0 Function reserve (mm) WTE 0T IR Order information WTE OT-P WTE OT-P WTE OT-P WTE OT-N WTE OT-N WTE OT-N WTE OT-F WTE OT-F WTE OT-F WTE OT-E WTE OT-E WTE OT-E Light spot diameter WTE 0T IR Ø mm Ø 0 mm Ø 8 mm Sensor 0. Distance [m] 0..0

16 WL 0 Photoelectric Reflex Switch, Red Light -- DC Scanning range m Phtotoelectric reflex switch Very small light spot Short response time Detection of (semi-)transparent objects Detction of smallest objects LED indicator: function reserve Dimension illustration Setting options All types TEACH Optics center, receiver Optics center, transmitter Plug pin/ pin, 8 or connection cable Teach-In button Light/dark rotary switch: L = light switching D = dark switching Orange LED indicator: switching output active Green LED indicator: light reception with operating reserve >. L.ON D.ON C Connection type WLOT-P WLOT-N WL OT-F WLOT-E WLOT-P WLOT-N WL OT-F WLOT-E WLOT-P WLOT-N WL OT-F WLOT-E Accessories Connectors ounting systems Reflectors x0. mm pin, 8 pin, 8 brn blu blk gra L+ L+ L+

17 WL 0T Technical data WL 0T- P ) /F ) P ) /F ) P ) /F ) N ) /E ) N ) /E ) N ) /E ) Scanning range m /P 0 (included) Sensitivity control External Teach () Light source ) LED, red light with polarizing filter Supply voltage V S V DC ) Ripple ) ±0% Current consumption ) 0 ma Switching outputs PNP, open collector: NPN, open collector: Output current I A max. 00 ma Light receiver, switching type Light/dark switching per rotary switch Response time ) /switching freq. max. 8) 0. ms / 00/s Connection type: cable PVC, m 9) ; x 0. mm, l. mm pin, 8 pin, 8 VDE protection class III Circuit protection 0) A, B, C, D Enclosure rating IP Ambient temperature Operation...+ C Storage C Weight With cable / m approx. 0 g With approx. 0 g Housing material Housing: PBT; Optic: PA ) Housing form: horizontal ) Housing form: vertical ) Average service life 00,000 h at T U = + C ) Limit values ) ust be within V S tolerances ) Without load ) With resistive load 8) With light/dark ratio : 9) m are available on request, do not bend cable below 0 C 0) A=V S connections reverse-polarity B = Inputs and outputs reversepolarity C = Interference suppression D = Outputs overcurrent and short-circuit Scanning range and function reserve (m) 0... Operating range Reflector type PL80 A P0/PL0/0 A PL0 A/ A Pl 0 A Reflexionsfolie Diamond Grade P Operating range m m m m m m 00 Function reserve 0 Switching threshold (m) Light spot diameter WL 0T Ø mm Ø mm Ø mm Order information WLOT-P WLOT-P WLOT-P WLOT-N WLOT-N WLOT-N WL OT-F WL OT-F WL OT-F WLOT-E WLOT-E WLOT-E Sensor 0. Distance [m] 0.

18 Accessories Connectors Dimension illustrations and ordering information Contact assignment according to EN 00 circular screwing system 8, pin/ pin, Enclosure rating IP 8 Cable receptacles, pin, straight DOS-080-G Cable receptacles, pin, angled DOS-080-W ø 8x 8 Cable diameter max.. mm Cable diameter max.. mm 8 8x ø 8 Cable receptacles, pin, straight Cable diameter mm, x 0. mm, PVC coating Cable length DOL-080-G m DOL-080-G m DOL-080-G m 8 Cable receptacles, pin, angled Cable diameter mm, x 0. mm, PVC coating Cable length DOL-080-W m DOL-080-W m DOL-080-W m R min ) /brn /blk /brn ø0 8x 0. /blk /blu /blu R min ). 8x ø0 8 Cable receptacles, pin, straight DOS-080-G Cable receptacles, pin, angled DOS-080-W ø. 8x 8. Cable diameter max..0 mm. 8.0 Cable diameter max..0 mm 8x ø. 8

19 Accessories W 0T Dimension illustrations and ordering information 8 Cable receptacles, pin, straight Cable diameter mm, x 0. mm, coating PVC DOL-080-G0 DOL-080-G0 DOL-080-G Cable length m m 0 m 8 Cable receptacles, pin, angled Cable diameter mm, x 0. mm, coating PVC DOL-080-W0 DOL-080-W0 DOL-080-W Cable length m m 0 m R min ) /wht /brn /wht /brn ø 0 8x 0. /blk /blu /blk /blu R min ). 8x ) inimum bending radius with dynamic use R min = 0 x cable diameter ø 0 ounting brackets for W 0 BEF-W Reflective tape REF-DG-K REF-DG 09 0 Ready-made Sheet 9 x 9 mm Supplied with WL 0T, WTB 0T BGS, WTE 0T, WTF 0T and WT 0T ark. Plastic model for temperatures up to C Reflector 0 x 0 mm PL 0 A 0 9 Reflector 0 x 0 mm PL 0 A 00 Reflector 0 x 0 mm Self-adhesive PL A self-adhesive ø. ø8 ø. ø8 8 ø. ø

20 Accessories Reflectors Dimension illustrations and ordering information Reflector 0 x 0 mm Self-adhesive PL 0 A 0 0 Reflector, hexagonal Opening width 8 mm PL 0 A 000 ø ø. ø Reflector 8 x 0 mm P Reflector 80 x 80 PL 80 A ø. ø.. Reflector x mm PL Supplied with WL 0T. 0

21 Accessories W 0T Dimension illustrations and ordering information Universal bracket for rod mounting L K J 8 Clamping screw ø8 F B ø-0 Plate B F J K L BEF-KHS-B0 BEF-KHS-F0 BEF-KHS-J0 BEF-KHS-K0 BEF-KHS- L0 ) Sensors/reflectors P 0, PL 0 A, PL 0 A, PL 0 A, PL 80 A, C 0 W 0, PL 0 A, P 0 PL 0 A, PL 0 A, PL 0 A, P 0, C 0 W, W -, W L-, W, W 8-, W, W -, W -, W 0, W, W, W, KT, KT, KT 0, CS, LUT, DS 0, PL 0 A, PL 0 A, PL 0 A, PL 0 A, PL 80, A, P 0, C 0 W 9-, W 0, W 0, W 0, P 0 BEF-KHS-KH 0 Clamp bracket rod mounting without attachment plate and mounting material ) Universal bracket and mounting screws included

22 8 009 / HJS/S Printed in Germany (.00) We reserve the right to make changes Contact: Australia Phone toll free Fax Austria Phone Fax Belgium/Luxembourg Phone + Fax + 0 Brazil Phone + 8 Fax + China/Hong Kong Phone +8 9 Fax +8 Czech Republic Phone Fax Denmark Phone Fax Finland Phone Fax France Phone Fax + - Germany Phone Fax Great Britain Phone + -8 Fax + -8 Italy Phone Fax Japan Phone Fax Netherlands Phone Fax Norway Phone + 00 Fax + 0 Poland Phone +8-8 Fax +8-8 Singapore Phone + Fax + 8 Spain Phone Fax Sweden Phone Fax Switzerland Phone Fax Taiwan Phone Fax USA Phone Fax Representatives and agencies in all major industrial nations. SICK AG Automatisierungstechnik Sebastian-Kneipp-Straße D-98 Waldkirch Phone Fax