Contrast scanners detect the little differences
|
|
- Lydia Cummings
- 6 years ago
- Views:
Transcription
1 KT /KT Contrast scanners Contrast scanners Contrast scanners detect the little differences Adjustment of the standard version is carried out manually. The contrast scanner has an integrated adjustment aid for setting the switching threshold. The KT is also available as a fibre-optic cable version which can be used in locations where space is restricted. NNowadays, contrast scanners are indispensable in automated packaging processes. They are used wherever differences in contrast must be detected quickly and accurately. With over 0 distinguishable grey tones, they are able to detect all types of contrast markings, e.g. print marks on film or packaging materials. A large range of device types employing a variety of contrast detection techniques with different user interfaces are available to fulfil a wide range of application requirements. In the case of versions with teach-in, the switching threshold can be set via the control cable or by means of the teach-in button on the device. A further variant offers dynamic teach-in where the switching threshold is adjusted automatically as markings and background pass through the scanning zone. The scanner with dynamic contrast detection offers maximum operating convenience. With this version, the switching threshold is automatically adjusted to the contrast currently being scanned. The small and extremely cost-effective KT is the ideal solution for less complex applications. 9 SENSICK CATALOGUE
2 KT /KT n KT G positioning tubes to allow precise labelling. b Absolute reliability required: KT monitoring the date stamp on the labels of pharmaceutical products. n The KT contrast scanner being used for calibrating gas meters. v aking sure the champagne doesn t bubble over too soon: KT contrast scanner uses capsule marks to position champagne bottles. SENSICK CATALOGUE 9
3 KT G- Contrast scanners Contrast scanners Green light 0/0/0 mm anual switching threshold adjustment Adjustment switch Optional time delay Switching frequency 0 khz Dimensional drawing KT G-P KT G-P KT G-N ø.. KT G-P KT G-P KT G-N KT G-P KT G-P KT G-N ø ø 9 Adjustments possible All types 9 Lens (light transmission), can be replaced by item mounting holes,. mm deep See dimensional drawing of lens Blind screw, can be replaced by item X -pin, x plug (rotatable through 90 ) Function signal indicator (yellow) Operating mode selector switch Light-switching Dark-switching 8 Switching threshold adjustment 9 Adjustment indicators (green) 8 C V Connection type All types ON Accessories page Cable receptacles 9 Lens -pin, brn blk blu wht L+ A 9 SENSICK CATALOGUE
4 KT G- Technical data KT G- P P P P P P N N N from front edge of lens/ Light spot dimensions 0 ± mm /. x. mm 0 ± mm /. x. mm 0 ± mm /. x. mm Light spot direction Longitudinal Light source ), light type, wavelength LED, green light, 0 nm Supply voltage V S VDC ) Ripple ) < V SS Current consumption ) < ma Switching outputs Light-/dark-switching, selectable PNP: HIGH = V S < V / LOW = 0 V NPN: HIGH = V S / LOW = < V Output current l A max. 00 ma Response time ) 0 µs ax. switching frequency ) to 0 khz Time delay No timing element Deactivation delay,...0 ms Analogue output A, optional Switching threshold ma Adjustable (standard type) Connection type Plug -pin, x VDE protection class ) Enclosure rating IP Circuit protection 8) A, B, C V Ambient temperature T A Operation 0 C...+ C Storage C...+ C Shock load To IEC 8 Weight Approx. 00 g Housing material Coated metal ) Average service life 00,000 h at T A = + C ) Limit values ) ay not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : ) Reference voltage 0 V DC 8) A = V S connections reverse-polarity B = Output and A short-circuit C = Interference pulse suppression Relative sensitivity in % Order information Preferred type Part no. KT G-P 0 99 KT G-P 0 99 KT G-P KT G-P 0 00 KT G-P 0 00 KT G-P 0 00 KT G-N 0 98 KT G-N 0 98 KT G-N (mm) mm 0 mm 0 mm SENSICK CATALOGUE 9
5 KT G- Teach-in contrast scanners Contrast scanners 0 mm/0 mm Dimensional drawing 9 8 KT G-P KT G-N KT G-P KT G-N Green light Static teach-in via control cable or control panel on unit Fine/coarse via control cable or control panel on unit No light-/dark-selection Switching frequency 0 khz 0 0. ø.. ø.. 8 Adjustments possible KT G-P KT G-N fine RUN T E A C RUN H coarse KT G-P KT G-N 8 Lens (light transmission), can be replaced by Item mounting holes,. mm deep See dimensional drawing of lens Blind screw, can be replaced by Item -pin, x plug (rotatable through 90 ) Function signal indicator (yellow) Pre-selection switch for minimum contrast Teach-in button 8 TEACH C V Connection type KT G-P KT G-N KT G-P KT G-N ON Accessories page Cable receptacles 9 Lens -pin, x brn blk blu wht gra L+ F/C ET 98 SENSICK CATALOGUE
6 KT G- Technical data KT G- P N P N from front edge of lens 0 ± mm 0 ± mm Light spot dimensions. x. mm Light source ), light type LED, green Supply voltage V S VDC ) Ripple ) < V SS Current consumption ) < ma Switching outputs PNP: HIGH = V S < V / LOW = 0 V NPN: HIGH = V S / LOW = < V Output current l A max. 00 ma, short circuit Response time ) 0 µs ax. switching frequency ) to 0 khz Teach-in input ET Pulse duration Retention time Fine/coarse input F/C PNP: Teach > 0 V...< V S Run 0 V or unswitched NPN: Teach 0 V ET > 0 ms Run V S or unswitched ms non-volatile memory PNP: Fine 0 V or unswitched Coarse > 0 V...< V S NPN: Fine V S or unswitched Coarse 0 V Connection type Plug -pin, x VDE protection class ) V Enclosure rating IP Circuit protection 8) A, B, C Ambient temperature T A Operation 0 C...+ C Storage C...+ C Shock load To IEC 8 Weight Approx. 00 g Housing material Coated metal ) Average service life 00,000 h at T A = + C ) Limit values ) ay not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : ) Reference voltage 0 V DC 8) A = V S connections reverse-polarity B = Output short-circuit C = Interference pulse suppression Relative sensitivity in % (mm) with lens 0 mm with lens 0 mm Teach-in Teach-in and fine/coarse (contrast resolution) The two settings can be triggered simultaneously either via control panel or control cables. Control panel: The teach-in button can be locked against accidental actuation with run. In an undefined switching position, no teach-in procedure can be triggered. Setting via control panel:. Select fine or coarse using rotating switch. Position light spot on mark. Trigger teach-in via teach-in switch Light-/dark-switching is not required/acknowledge/signal or active = teach-in procedure completed Setting via control cable:. Select fine or coarse using rotating switch. Position light spot on mark. Trigger teach-in via ET control cable Order information Type KT G-P KT G-N KT G-P KT G-N A P A P Part no Switching threshold Switching threshold inimum contrast SENSICK CATALOGUE 99
7 KT W- Teach-in contrast scanners, dynamic Contrast scanners 0 mm/0 mm Dimensional drawing 9 8 KT W-P KT W-N KT W-P KT W-N Dynamic teach-in Automatic light transmission selector, red, blue and green Teach-in: button on unit or via control cable L/D adjustable on unit or via control cable No light/dark selection Switching frequency 0 khz ø.. ø.. Adjustments possible KT W-P KT W-N RUN RUN L D T E A C H KT W-P KT W-N 8 Lens (light transmission), can be replaced by Item mounting holes,. mm deep See dimensional drawing of lens Blind screw, can be replaced by Item -pin, x plug (rotatable through 90 ) Function signal indicator (yellow) L/D pre-selection switch Teach-in button 8 TEACH C V Connection type KT W-P KT W-N KT W-P KT W-N ON Accessories page Cable receptacles 9 Lens -pin, x brn blk blu wht gra L+ L/D ET 00 SENSICK CATALOGUE
8 KT W- Technical data KT W- P N P N from front edge of lens 0 ± mm 0 ± mm Light spot dimensions. x. mm Light source ), light type LED, red, blue, green Supply voltage V S VDC ) Ripple ) < V SS Current consumption ) < ma Switching outputs Output current l A max. Response time ) 0 µs ax. switching frequency ) Teach-in input ET Retention time L/D input, light-/dark-switching PNP: HIGH = V S < V / LOW = 0 V NPN: HIGH = V S / LOW = < V 00 ma, short-circuit to 0 khz PNP: Teach > 0 V...< V S Run 0 V or unswitched NPN: Teach 0 V Run V S or unswitched ms non-volatile memory PNP: dark = > 0 V...< V S light = 0 V or unswitched NPN: dark = 0 V light = V S or unswitched Connection type Plug -pin, x VDE protection class ) Enclosure rating IP Circuit protection 8) A, B, C V Ambient temperature T A Operation 0 C...+ C Storage C...+ C Shock load To IEC 8 Weight Approx. 00 g Housing material Coated metal ) Average service life 00,000 h at T A = + C ) Limit values ) ay not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : ) Reference voltage 0 V DC 8) A = V S connections reverse-polarity B = Output short-circuit C = Interference pulse suppression Teach-in Order information Type Part no. 00 Teach-in and light/dark KT W-P 0 9 The two settings can be triggered simultaneously either 90 via control panel or control cable. KT W-N 0 0 Control panel: The teach-in button can be locked against KT W-P can be triggered. Setting through control panel:. Select light (L) or dark (D) using rotating switch accidental actuation with run. KT W-N 0 In an undefined switching position, no teach-in procedure Trigger teach-in via teach-in button. Run the object to be detected at least one register length through the light spot Acknowledged via or LED control flashes = insufficient contrast. Setting via control cable. Select light or dark using control cable Teach-in. Trigger teach-in via ET control cable (mm) Run the object to be detected at least one register length through the light spot. End teach-in Switching threshold with lens 0 mm aterial speed during teach-in: with lens 0 mm min. mm/s, max. 00 mm/s. Relative sensitivity in % SENSICK CATALOGUE 0
9 KT G- Contrast scanners, dynamic Contrast scanners 0 mm Dimensional drawing 9 8 KT G-P KT G-N Green light Dynamic contrast determination Fine/course adjustment Light/dark finely adjustable Switching frequency 0 khz 0 0. ø.. 8 Adjustments possible KT G-P KT G-N light C F F C dark L I N E Lens (light transmission), can be replaced by Item mounting holes,. mm deep See dimensional drawing of lens Blind screw, can be replaced by Item -pin, Function signal indicator (yellow) Fine/coarse selection C V Connection type KT G-P KT G-N ON Accessories page Cable receptacles 9 Lens -pin, brn blk blu wht gra L+ F/C L/D 0 SENSICK CATALOGUE
10 KT G- Technical data P N from front edge of lens Light spot dimensions Light source ), light type 0 ± mm. x. mm LED, green Supply voltage V S VDC ) Ripple ) < V SS Current consumption ) < ma Switching outputs PNP: HIGH = V S < V / LOW = 0 V NPN: HIGH = V S / LOW = < V Output current l A max. 00 ma, short-circuit Response time ) 0 µs ax. switching frequency ) to 0 khz Fine/coarse input, F/C L/D input, light-/dark-switching PNP: Fine 0 V or unswitched Coarse > 0 V...< V S NPN: Fine V S or unswitched Coarse 0 V PNP: dark = > 0 V...< V S light = 0 V or unswitched NPN: dark = 0 V light = V S or unswitched Connection type Plug -pin, VDE protection class ) Enclosure rating IP Circuit protection 8) A, B, C V Ambient temperature T A Operation 0 C...+ C Storage C...+ C Shock load To IEC 8 Weight Approx. 00 g Housing material Coated metal ) Average service life 00,000 h at T A = + C ) Limit values ) ay not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : ) Do not bend below 0 C 8) Reference voltage 0 V DC 9) A = V S connections reverse-polarity B = Output short-circuit C = Interference pulse suppression Function The switching threshold for the KT G- P/N contrast scanner is tracked dynamically to the existing contrast. No teach-in procedure is required. The fine or coarse contrast and the light or dark selection can be triggered via the switch on the control panel or the control cable. Order information Type Part no. KT G-P KT G-N Relative sensitivity in % 0 0 (mm) 0 0 In the LINE switching position, the control panel is blocked, only F/C and L/D settlings triggered via the control cable are accepted. The following example shows function in the coarse position and the dark-switching operating mode: 0 mm P SENSICK CATALOGUE 0
11 KT W- Teach-in contrast scanners, static Contrast scanners 0 mm Dimensional drawing 9 8 Static teach-in to mark and background via control cable or control panel on unit Automatic switching threshold adjustment for detection of extremely shiny objects Adjustments possible KT W-P KT W-N RUN T E A C H Lens (light transmission), can be replaced by Item mounting holes,. mm deep Blind screw, can be replaced by Item -pin, x plug (rotatable through 90 ) Function signal indicator (yellow) Pre-selection switch Teach-in button TEACH C V Connection type KT W-P KT W-N ON Accessories page Cable receptacles 9 -pin, x brn blk blu wht gra L+ NC ET 0 SENSICK CATALOGUE
12 KT W- Technical data KT W- P N from front edge of lens Light spot dimensions Light source ), light type 0 ± mm. x. mm LED, red, blue, green Supply voltage V S VDC ) Ripple ) < V SS Current consumption ) < ma Switching outputs PNP: HIGH = V S < V / LOW = 0 V NPN: HIGH = V S / LOW = < V Output current l A max. 00 ma, short-circuit Switching frequeny To 0 khz Response time ) 0 µs ax. switching frequency ) to 0 khz Teach-in input ET Retention time PNP: Teach > 0 V...< V S Run 0 V or unswitched NPN: Teach 0 V Run V S or unswitched ms non-volatile memory Connection type Plug -pin, VDE protection class ) Enclosure rating IP Circuit protection 8) A, B, C V Ambient temperature T A Operation 0 C...+ C Storage C...+ C Shock load To IEC 8 Weight Approx. 00 g Housing material Coated metal ) Average service life 00,000 h at T A = + C ) Limit values ) ay not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : ) Reference voltage 0 V DC 8) A = V S connections reverse-polarity B = Output short-circuit C = Interference pulse suppression 00 Relative sensitivity in % (mm) 0 0 with lens 0 mm Static teach-in Control panel: The teach-in button can be locked against accidental actuation with run. In an undefined switching position, no teach-in procedure can be triggered. Setting via control panel:. Select teach-in using rotating switch. Position mark or background onto light spot trigger first teach-in procedure via teach-in button. Position background or mark onto light spot trigger second teach-in procedure via teach-in button. Setting via control cable:. Position mark or background onto light spot trigger first teach-in procedure via ET control cable. Position background or mark onto light spot trigger second teach-in procedure via ET control cable. Acknowledge: After the first teach-in procedure, the red transmission light flashes and the function signal slowly indicates that a second teach-in procedure must be triggered. LED and flash quickly = insufficient contrast LED and do not flash = teach-in completed Light-/dark-switching not required, unit switches on the object to be detected, that was under the light spot during the first teach-in procedure (mark or background). Order information Type Part no. KT W-P 08 0 KT W-N 08 0 SENSICK CATALOGUE 0
13 KT Laser contrast scanners 0 mm Laser contrast scanners Laser class Adjustment switch Long scanning distance Accurate recording of very small marks Switching frequency 0 khz Dimensional drawing Adjustments possible KT L-P KT L-N 9 9 X Blind screw Receiver Sender mounting holes,. mm deep -pin, x plug Function signal indicator (red) Operating mode selector switch Light-switching Dark-switching 8 Switching threshold adjustment 9 Adjustment indicators (green) 8 C V Connection type KT L-P KT L-N Laser class ON Accessories page Cable receptacles 9 -pin, brn blk blu wht L+ A 0 SENSICK CATALOGUE
14 KT L Technical data KT L- P N from front edge of lens Light spot Light source ), light type 0 mm ± 0 mm < 0. mm at 0 mm Laser diode, red light Supply voltage V S V DC ) Ripple ) < V SS Current consumption ) < ma Switching outputs Light-/dark-switching, selectable PNP: HIGH = V S < V/LOW = 0 V NPN: HIGH = V S /LOW = < V Output current l A max. 00 ma, short-circuit Response time ) 0 µs ax. switching frequency ) To 0 khz Analogue output A, ma Connection type Plug -pin, VDE protection class ) Laser class (IEC 8/VDE 08) Enclosure rating IP Circuit protection 8) A, B, C V Ambient temperature T A Operation 0 C...+0 C Storage C...+ C Shock load To IEC 8 Weight Approx. 00 g Housing material Coated metal ) Average service life 00,000 h at T A = + C ) Limit values ) ay not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : ) Reference voltage 0 V DC 8) A = V S connections reverse-polarity B = Outputs and A short-circuit C = Interference pulse suppression Order information Type Part no. KT L-P 0 KT L-N 0 SENSICK CATALOGUE 0
15 KTL G- Contrast scanners Proximity mode up to mm Dimensional drawing 9 8 Scanning range up to 0 mm 0. Through-beam mode Green light Switching threshold adjustable Insensitive to ambient light Adjustment switch Switching frequency 0 khz High contrast resolution Fibre-optic cable for high temperatures. Adjustments possible KTL G-P KTL G-N mounting holes,. mm deep Fibre-optic adapter ( x internal thread) -pin, x plug (rotatable through 90 ) Function signal indicator (yellow) Operating mode selector switch X Light-switching Dark-switching Switching threshold adjustment Adjustment indicators (green) C U V Connection type KTL G-P KTL G-N ON Accessories page Cable receptacles 9 Fibre-optic cable 8 -pin, brn blk blu wht L+ A optional 08 SENSICK CATALOGUE
16 KTL G- Technical data KTL G- P N /scanning range Light source ), light type mm/0 mm LED, green Supply voltage V S VDC ) Ripple ) < V SS Current consumption ) < 0 ma at V DC Switching outputs Light-/dark-switching, selectable PNP: HIGH = V S < V/LOW = 0 V NPN: HIGH = V S /LOW = < V Output current l A max. 00 ma, short-circuit Response time ) 0 µs ax. switching frequency ) To 0 khz Analogue output A, optional ma Connection type Plug -pin, VDE protection class ) Enclosure rating IP Circuit protection 8) A, B, C V Ambient temperature T A Operation 0 C...+ C Storage C...+ C Shock load To IEC 8 Weight Approx. 00 g Housing material Coated metal ) Average service life 00,000 h at T A = + C ) Limit values ) ay not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : ) Reference voltage 0 V DC 8) A = V S connections reverse-polarity B = Outputs and A short-circuit C = Interference pulse suppression Relative sensitivity in % (mm) 8 0 Order information Type Part no. KTL G-P 0 9 KTL G-N 0 9 Fibre-optic cable LBST 900 Fibre-optic cable LBSR 900 Fibre-optic cable OCSL SENSICK CATALOGUE 09
17 KT Contrast scanners Contrast scanners. mm Dimensional drawing 0 Red or green light transmitter Sensitivity adjustable Light- or dark-switching selectable via control cable Switching frequency 0 khz NPN and PNP switching output Adjustments possible KT R - B KT G - B KT R - B Reception indicator Optical axis receiver Optical axis sender threaded mounting hole, mm deep Through hole l. mm plug (rotatable through 90 ) Sensitivity adjustment Sensitivity C U V Connection type KT R - B KT G - B KT R - B Accessories page Cable receptacles 9 Terminal bracket* 0 ounting brackets 0 * units included with delivery -pin, brn blu blk wht gra L+ P N L/D 0 SENSICK CATALOGUE
18 KT Technical data KT R-B from front edge of lens Light spot diameter Light source ), light type. mm mm LED, red LED, green Supply voltage V S VDC ) Ripple ) Current consumption ) < V SS < ma G-B R-B Switching outputs Light-/dark-switching, selectable PNP: HIGH = V S <.9V/ LOW = approx. 0 V NPN: HIGH = V S /LOW = <. V Output current l A max. 00 ma Response time ) 0 µs ax. switching frequency ) 0 khz Time delay Deactivation delay 0 ms L/D input, light-/dark-switching PNP: dark = > 0 V...< V S light = 0 V or unswitched NPN: dark = O V light = V S or unswitched Connection type Plug -pin, VDE protection class ) Enclosure rating IP Circuit protection 8) A, B, C V Ambient temperature T A Operation 0 C...+ C Storage C...+ C Shock load To IEC 8 Weight Approx. 00 g Housing material Coated metal ) Average service life 00,000 h at T A = + C ) Limit values ) ay not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : ) Reference voltage 0 V DC 8) A = V S connections reverse-polarity B = Output short-circuit C = Interference pulse suppression Order information Type Part no. KT R-B 0 KT G-B 0 KT G-B 0 Relative sensitivity in % (mm) TW. mm Object shown with 90 % remission (based on standard white acc. to DIN 0) SENSICK CATALOGUE
19 NT Contrast scanners Contrast scanners 9 mm Dimensional drawing 9 8 LED light source with two switchselectable spectral ranges Lens position selectable Light- or dark-switching selectable Rapid response times Adjustments possible NT -00 NT -008 NT -0 NT -00 NT -00 NT -0 NT -008 NT -00 Blind screw can be replaced by Item Lens can be replaced by Item threaded mounting hole,. mm deep Function signal indicator Cover for adjuster -pin, plug or m cable with T0/ plug or m cable 8 X Control for switching threshold Switch for operating mode Light-switching Dark-switching J J 8 C U V Connection types NT -00 NT -008 NT -00 NT -0 NT -008 NT -0 NT -00 NT -00 Accessories page Cable receptacles 9 Lens x 0. mm -pin, cable + plug red gra blu blk grn yel L+ PE NC A brn blk blu wht gra L+ L+ PE PE A NC A SENSICK CATALOGUE
20 NT Technical data NT from front edge of lens Light type/light spot dimension 9 mm ± mm Green/. x mm Red/. x mm Light source ), light type Light spot direction LED, red, green selectable Longitudinal Transverse Supply voltage V S VDC ) Ripple ) < V Current consumption ) < ma Switching outputs Light-/dark-switching, selectable B: HIGH = V S < V/LOW = < V PNP: HIGH = V S < V/LOW = 0 V Output current l A max. 00 ma Response time ) 0 µs ax. switching frequency ) To 0 khz Analogue output A 0... V Connection types Cable ) with T 0/ plug Cable ) without plug Plug VDE protection class 8) Enclosure rating IP Circuit protection 9) A, B, C V Ambient temperature T A Operation 0 C...+0 C Storage C...+ C Shock load To IEC 8 Weight Approx. 0 g Housing material Cast metal ) Average service life 00,000 h at T A = + C ) Limit values ) ay not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : ) Do not bend below 0 C 8) Reference voltage 0 V DC 9) A = V S connections reverse-polarity B = Outputs and A short-circuit C = Interference pulse suppression Order information Type Part no. NT NT NT NT NT NT NT NT Relative sensitivity in % (mm) mm SENSICK CATALOGUE
21 Lichtschranken NT 8 Contrast scanners Baureihe WL - Contrast scanners 9 mm White light source Light- or dark-switching selectable Rapid response times Adjustable switching threshold Dimensional drawing Adjustments possible NT 8-0 NT Cover for adjuster threaded mounting hole,. mm deep Dry cartridge with sight glass, can be replaced by Item Lens, can be replaced by Item m cable with -pin plug + PE m cable Control for switching threshold Light-/dark-switching selector switch Function signal indicator 8 C V Connection types NT 8-0 NT 8-0 Accessories page Cable receptacles 9 Cable 09 Lens x 0. mm x 0. mm x 0. mm sheathed red wht blk grn L+ L+ lamp lamp Cable + -pin plug + PE L+ L+ lamp lamp PE SENSICK CATALOGUE
22 NT 8 Technical data NT from front edge of lens Light 9 mm ± mm. x. mm Light source ), light type Light spot direction Incandescent lamp, white Longitudinal Transverse Supply voltage V S VDC ) Ripple ) < V Current consumption ) < 0 ma Supply voltage for lamp. V ± 0 % Current consumption for lamp ma Switching outputs Light-/dark-switching, selectable NPN: HIGH = V S / LOW = < V Output current l A max. 00 ma Response time ) 0 µs ax. switching frequency ) 0 khz Connection types Cable ) with -pin plug + PE Cable ) without plug VDE protection class 8) Enclosure rating IP Circuit protection 9) A, B, C V Ambient temperature T A Operation 0 C...+0 C Storage C...+8 C Shock load To IEC 8 Weight 00 g Housing material Cast metal ) Average service life 0,000 h at T A = + C ) Limit values ) ay not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : ) Do not bend below 0 C 8) Reference voltage 0 V DC 9) A = V S connections reverse-polarity B = Output short-circuit C = Interference pulse suppression Order information Type Part no. NT NT Operating reserve (mm) mm SENSICK CATALOGUE
CS Colour sensors: When it s the colour that counts
CS Colour sensors Colour sensors CS Colour sensors: When it s the colour that counts A brief description of the process: an object is illuminated using light of varying spectral composition. The light
More informationWL 4-2 Photoelectric reflex switches, red light, dark-switching -- DC
WL - Photoelectric reflex switches, red light, dark-switching -- DC Scanning range.8 m Photoelectric reflex switches Dimensional drawing Insensitive to ambient light sources (HF lamps, flashing warning
More informationPhotoelectric switches WLL 170(T), fibre-optic cables LL 3: flexible solutions with fibre-optic cable systems
WLL 0(T) Photoelectric switches Photoelectric switches with fibre-optic cable Proximity mode Photoelectric switches with fibre-optic cable Through-beam mode Photoelectric switches WLL 0(T), fibre-optic
More informationDMH: Multidimensional sensors for a wide variety of height detection tasks
DMH Light section sensors DMH Standard DMH Shingle counters DMH: Multidimensional sensors for a wide variety of height detection tasks of light on the receiver array. The line of light hitting an object
More informationWT190T: The convenient, reliable proximity switch precisely the right one for challenging applications
W90T Photoelectric switches FGS Photoelectric proximity switch BGS Photoelectric proximity switch WT90T: The convenient, reliable proximity switch precisely the right one for challenging applications TThe
More informationW 2: Subminiature photoelectric switch series: extremely small and extremely strong
W Photoelectric switches Photoelectric proximity switches BGS Photoelectric proximity switches energetic, (V optics) Photoelectric reflex switches W : Subminiature photoelectric switch series: extremely
More informationV 12-2 Miniature photoelectric switches: innovations in M12 housings
V - Photoelectric switches Photoelectric proximity switches Photoelectric reflex switches Through-beam photoelectric switches V - iniature photoelectric switches: innovations in housings The V - optic
More informationV 18 Laser No frills performance: long ranges, high speeds with precision
V 8 Laser No frills performance: long ranges, high speeds with precision VTE 8 L photoelectric proximity switches: energetic type, scr. mm (9 % remission). Additional standard features: very short response
More informationContrast Sensors. SICK The pioneer in contrast sensors for more than 60 years
P r o d u c t i n f o r m at i o n Contrast Sensors SICK The pioneer in contrast sensors for more than 60 years Top products Contrast sensors They put registration marks into a proper light SICK contrast
More informationWLL 170 Photoelectric switches with fibre-optic cable, red light, manual sensitivity adjustment -- DC. Dimensional drawing R1.6 2-R
WLL 0 Photoelectric switches with fibre-optic cable, red light, manual sensitivity adjustment -- DC 0... 0 mm Through-beam systems Dimensional drawing R. -R. Scanning distance 0... 0 mm. Proximity systems
More informationsuppression, insensitive to optical interference, sensor E photoelectric switch, areas Zone 2 (gas) and Zone 22 (non-conductive dust).
KD0_Ex_D_G_en.qxd 0.08.00 Photoelectric proximity switches BGS Photoelectric reflex switches Through-beam photoelectric switches 0:8 Uhr Seite 08 Ready-to-fit and Standardcompliant - Cat. D/G Photoelectric
More informationW 23-2: Focussing on what is essential and economic
Product group W - BGB Photoelectric proximity switch Energ. Photoelectric proximity switch W -: Focussing on what is essential and economic Photoelectric reflex switch The indicator LEDs on the W - offer
More informationW 250: Compact photoelectric switch series for a broad range of applications
W 0 Photoelectric switches Photoelectric proximity switches, GS Photoelectric reflex switches Through-beam photoelectric switches W 0: Compact photoelectric switch series for a broad range of applications
More informationW 2: Sub-Miniature Photoelectric Switch Range: Super-Small and Powerful
W Photoelectric switches Photoelectric proximity switches BGS Photoelectric proximity switches energetic, (V optics) Photoelectric reflex switches W : Sub-iniature Photoelectric Switch Range: Super-Small
More informationV 18 Laser No frills performance: long ranges, high speeds with precision
V 8 Laser No frills performance: long ranges, high speeds with precision VTE 8 L photoelectric proximity switches: energetic type, scr. 00 mm (90 % remission). Additional standard features: very short
More informationSICK laser competence in photoelectric switches
Laser photoelectric switches SICK laser competence in photoelectric switches WTL Laser sensors with high beam quality at distances of up to m. WL- Best performance in a metal housing. The original proven
More informationW 280: Powerful sensors for standard applications
W 80 Photoelectric switches Photoelectric proximity switches, energetic Photoelectric reflex switches W 80: Powerful sensors for standard applications Through-beam photoelectric switches The devices with
More informationProduct description. At a glance. performance in a metal housing coating available Precise autocollimation optics. sensors
W- Laser Small photoelectric sensors W High-performance photoelectric sensor family with laser optics Product description At a glance performance in a metal housing coating available Precise autocollimation
More informationW 150: Miniature photoelectric switch series with completely integrated electronics
W 0: iniature photoelectric switch series with completely integrated electronics Special mechanical engineering tasks. The W 0 optics systems and their ranges: WS/WE 0 through-beam photoelectric switch:.
More informationDS 500/DT 500 Laser sensor measures distances to 18 m on black material in proximity mode
AUDIN - 8, avenue de la malle - 70 Saint Brice Courcelles - Tel : 0..0.0. - Fax : 0..0.8.0 - Web : http: www.audin.fr - Email : info@audin.fr DS 00/DT 00 Laser sensor measures distances to 8 m on black
More informationOnline data sheet NT NT8 CONTRAST SENSORS
Online data sheet NT8-02412 NT8 A B C D E F H I J K L M N O P Q R S T Detailed technical data Features Dimensions (W x H x D) Ordering information Other models and accessories Sensing distance 9 mm 1)
More informationDS500/DT500 Laser sensor measures distances to 30 m on black material in proximity mode
DS00/DT00 Laser sensor measures distances to 0 m on black material in proximity mode DS00 distance sensor with two user taught switch outputs. Suitable for precise and reliable detection of objects even
More informationW27-3: The all-rounder: robust, powerful, very wide range of applications
W- Photoelectric switches BGS Photoelectric proximity switches Photoelectric reflex switches Through-beam photoelectric switches W-: The all-rounder: robust, powerful, very wide range of applications speed
More informationMiniature photoelectric switches series W4-3: The efficient space savers
iniature photoelectric switches series W-: The efficient space savers Photoelectric reflex switch with switching threshold adaptation and autocollimation. Transparent objects of all kinds can be reliably
More informationW 23-2: Focussing on what is essential and economic
Product group W - BGB Photoelectric proximity switch Energ. Photoelectric proximity switch W -: Focussing on what is essential and economic Photoelectric reflex switch The indicator LEDs on the W - offer
More informationMH 15: Short housing, clever mounting for smart solutions
H : Short housing, clever mounting for smart solutions HL photoelectric reflex switch:.0 m/. m (PL 80 A), with polarizing filter. HT photoelectric proximity D ATA S H E E T switch, energetic, scanning
More informationW 160T: With the smallest LED light spot
W 0T: With the smallest LED light spot BGS Photoelectric proximity switches Photoelectric proximity switches mark sensor Photoelectric proximity switches energetic Photoelectric reflex switches SSystem
More information5-pole M12 connector. Connecting cable: cab-m12/5-g-2m. LED (red) for dirt accumulation indication
D-LAS Series D-LAS-34-ED-25x2-AC-T (Glass Pane Detection) - Collimated laser beam (
More informationW 27-3: The all-rounder: robust, powerful, very wide range of applications
Product group W- BGS Photoelecric proximity switch Photoelectric reflex switch Through-beam photoelectric switch W -: The all-rounder: robust, powerful, very wide range of applications speed of set up:
More informationLUT2 Luminescence scanner
LUT Luminescence scanner Dimension illustration 0. Switching threshold adjustment for low fluorescence Static teach-in to mark and/or background via control cable or control panel on unit Switching frequency
More informationW 27-3: The all-rounder: robust, powerful, very wide range of applications
Product group W - BGS Photoelectric proximity switch Photoelectric reflex switch Through-beam photoelectric switch W -: The all-rounder: robust, powerful, very wide range of applications speed of set up:
More informationDS500/DT500 Laser sensor measures distances to 30 m on black material in proximity mode
DS00/DT00 Laser sensor measures distances to 0 m on black material in proximity mode DS00 distance sensor with two user taught switch outputs. Suitable for precise and reliable detection of objects even
More informationOnline data sheet NT NT6 CONTRAST SENSORS
Online data sheet NT6-03022 NT6 A B C D E F Illustration may differ Ordering information Type Part no. NT6-03022 1005822 Other models and accessories www.sick.com/nt6 H I K L M N O P Q R S T Detailed technical
More informationW 140-2: Miniature Photoelectric Switch Series with Large Scanning Ranges
BGS Photoelectric proximity switches Photoelectric proximity switches energetic Photoelectric reflex switches Through-beam photoelectric switches W 0-: iniature Photoelectric Switch Series with Large Scanning
More informationWFS Fork Sensors. Agile and flexible ideal mounting for labeling applications. P r o d u c t I n f o r m at i o n
P r o d u c t I n f o r m at i o n Fork Sensors Agile and flexible ideal mounting for labeling applications Agile and flexible ideal mounting for labeling applications Product description At a glance Optimized
More informationW 140-2: Miniature Photoelectric Switch Series with Large Scanning Ranges
BGS Photoelectric proximity switches Photoelectric proximity switches energetic Photoelectric reflex switches Through-beam photoelectric switches W 0-: iniature Photoelectric Switch Series with Large Scanning
More informationW140-2: Miniature Photoelectric Switch Series with Large Scanning Ranges
Product group W0- BGS Photoelectric proximity switch Energ. Photoelectric proximity switch Photoelectric reflex switch W0-: iniature Photoelectric Switch Series with Large Scanning Ranges The integrated
More informationW 140: Miniature Photoelectric Switch Series with Large Scanning Ranges
W : iniature Photoelectric Switch Series with Large Scanning Ranges Photoelectric proximity switch with adjustable scanning distance and background suppression (BGS): Scanning distance = adjustable up
More informationProduct description. At a glance. IP 69K-rated cylindrical photoelectric sensors in M18 stainless steel housing Resistant to all common cleaning
V8V Cylindrical photoelectric sensors V8 Cylindrical photoelectric sensors with foolproof touch-teach for washdown areas Product description The V8V has a chemical and pressure cleaning resistant housing
More informationMH15 Cylindrical Photoelectric Sensors
DATA SHEET H Cylindrical Photoelectric Sensors Short and fl ush: A short housing for fl ush mounting The H photoelectric sensor series concentrates on the essential. The H, offers the following optical
More informationW12-3: More robust, more accurate, more intelligent
W-: More robust, more accurate, more intelligent W- is protected effectively from electromagnetic fields. W- adapts to your system. Rotatable plug or cable connections provides increased mounting options,
More informationW27-3: The all-rounder: robust, powerful, very wide range of applications
Product group W- BGS Photoelectric proximity switch Photoelectric reflex switch Through-beam photoelectric switch W-: The all-rounder: robust, powerful, very wide range of applications unwanted optical
More informationW4S-3 Inox Photoelectric Switch Family
DATA SHEET WS- Inox Photoelectric Switch Family Smaller, tougher, better Best optical performance in a robust stainless steel housing WTBS- Inox, BGS 80 mm, Teach-in via wire Scanning distance... 80 mm
More informationOnline data sheet WSE9LC-3P2436A00 W9L-3
Online data sheet WSE9LC-3P2436A00 W9L-3 A B C D E F H I J K L M N O P Q R S T Ordering information Type Part no. WSE9LC-3P2436A00 1080958 Other models and accessories www.sick.com/w9l-3 Illustration may
More informationD-LAS Series D-LAS2-... Design. D-LAS Series Laser Digital Light Barriers. Product name: Transmitter: D-LAS2-(aperture)*-T
D-LAS Series -... - Visible laser beam (
More informationOnline data sheet VT12T-2P410 V12-2 CYLINDRICAL PHOTOELECTRIC SENSORS
Online data sheet VTT-P0 V- A B C D E F Illustration may differ Ordering information Type Part no. VTT-P0 606 Other models and accessories www.sick.com/v- H I J K L M N O P Q R S T Detailed technical data
More informationDATA SHEET. OD Precision. Displacement sensors for precise and comprehensive measurement tasks
DATA SHEET OD Precision Displacement sensors for precise and comprehensive measurement tasks OD Precision Displacement sensors for precise and comprehensive measurement tasks Displacement sensors from
More informationDS 500/DT 500 Laser sensor measures distances to 18 m on black material in proximity mode
DS 00/DT 00 Laser sensor measures distances to 8 m on black material in proximity mode DS 00 distance sensor with two user taught switch outputs. Suitable for precise and reliable detection of objects
More informationD-LAS Series D-LAS2-LC-... Design. D-LAS Series Laser Digital Light Barriers. Product name: Transmitter: D-LAS2-LC-T.
D-LAS Series D-LAS-LC-... - Visible laser beam (
More information5-step-switch for adjustment of sensitivity (switching threshold) LED (super-bright, yellow) for switching state indication.
D-LAS Series D-LAS-24/90-ED-(16)-AC-T (Glass Pane Detection) - Collimated laser beam (
More informationVLL 18T; M 18 photoelectric switches, for LL 3 fibre-optic cables: economic, flexible, functional
flexible positioning, increased temperatures, chemical resistance, etc. a suitable plastic LL fibre-optic cable is the solution. M 8, compatible housing for many solutions with appropriate basic principles
More informationON I T P ESCRI D L A IC N ECH T D M P P o s i t i o n F i n d e r
DMP Position Finder T E C N I C A D E S C R I P T I O N DMP Position Finder Overview The DMP Position Finder is an opto-electronic sensor designed for use in the storage and materials handling industry,
More informationOnline data sheet. WTB190TL-P460 W190 Laser High Grade PRODUCT PORTFOLIO
Online data sheet WTB90TL-P460 W90 Laser High Grade WTB90TL-P460 W90 Laser High Grade A B C D E F Illustration may differ Ordering information Type Part no. WTB90TL-P460 60646 Other models and accessories
More informationOnline data sheet VT12T-2N112 V12-2 CYLINDRICAL PHOTOELECTRIC SENSORS
Online data sheet VTT-N V- A B D E F Illustration may differ Ordering information Type Part no. VTT-N 60609 Other models and accessories www.sick.com/v- H I J K L M N O P R S T Detailed technical data
More informationQL55 Series Luminescence Sensor
Self-contained, microprocessor-based luminescence sensor Features Self-contained design in a robust, compact metal housing High sensitivity Microprocessor-controlled Senses luminescent marks, even on luminescent
More informationPHOTOELECTRIC SENSORS. Online data sheet
Online data sheet A B C D E F Illustration may differ Ordering information Type Part no. WTB4SL-3P6V 0585 Other models and accessories www.sick.com/w4sl-3v H I J K L M N O P R S T Detailed technical data
More informationCompact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications
Compact size and high performance for the most challenging detection applications Compact dimensions (14x42x25 mm) Background suppression for transparent and shiny objects High speed contrast sensor up
More informationCompact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications
Compact size and high performance for the most challenging detection applications Compact dimensions (14x42x25 mm) Background suppression for transparent and shiny objects High speed contrast sensor up
More informationCompact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications
Compact size and high performance for the most challenging detection applications Compact dimensions (14x42x25 mm) Background suppression for transparent and shiny objects High speed contrast sensor up
More informationOnline data sheet. WTB4S-3P1132V W4S-3 Inox MINIATURE PHOTOELECTRIC SENSORS
Online data sheet WTB4S-3P1132V W4S-3 Inox A B C D E F Illustration may differ Ordering information Type Part no. WTB4S-3P1132V 46402 Other models and accessories www.sick.com/w4s-3_inox H I J K L M N
More informationElectrical connection
Diffuse reflection light scanners with fading Dimensioned drawing We reserve the right to make changes DS_FT318BI_en_50127492.fm en 03-2015/09 50127492 10-30 V DC A 2 LS 500 Hz 1 280mm Diffuse reflection
More informationOptical laser distance sensors. Dimensioned drawing
Dimensioned drawing en 02-2012/11 50118552 50 100mm 18-30 V DC We reserve the right to make changes DS_ODSL9L100_en_50118552.fm High resolution 0.01mm Reflection-independent distance information Highly
More informationOptical laser distance sensors. Dimensioned drawing
Dimensioned drawing en 02-2012/11 50112361 150 800mm 10-30 V DC We reserve the right to make changes DS_ODSL96BS800_en_50112361.fm Small laser light spot for measurements on small, structured or metallic
More informationExample: ZX-BGS-DS300P-2M ZX Series - Diffuse Background Suppression Type - Distance Settable, 300mm Sensing Distance, PNP - 2m Cable
Laser Spot Sensor Background Suppression Type SALIENT FEATURES Ø1mm Spot size 250 µ sec Response External Laser Control Back Ground Suppression IP-67, Shock Resistant - 50G Measurement Class II LASER Product
More informationW 4-3 miniature photoelectric switch family: Efficient and space-saving
Product group W - BGS Photoelectric proximity switch Photoelectric reflex switch W - miniature photoelectric switch family: Efficient and space-saving influence of environmental effects! Whether humidity
More informationUltrasonic sensors. Reliable on almost all surfaces. UT 20 from Page 548. UT 12 from Page 564. UT/UM 18 from Page 568
Ultrasonic sensors Reliable on almost all surfaces UT 0 from Page 58 UT from Page 56 UT/UM 8 from Page 568 UT 0-S miniature ultrasonic sensors with soundpipe Reliable detection through the smallest of
More informationOnline data sheet WT34-B410 W34 PRODUCT PORTFOLIO
Online data sheet WT4-B40 W4 A B C D E F WT4-B40 W4 Illustration may differ Ordering information Type Part no. WT4-B40 099 Other models and accessories www.sick.com/w4 H I J K L M N O P Q R S T Detailed
More informationOnline data sheet. WLG190T-P420 W190 Laser High Grade Glass PRODUCT PORTFOLIO
Online data sheet WLG90T-P420 W90 Laser High Grade Glass WLG90T-P420 W90 Laser High Grade Glass A B C D E F Illustration may differ Ordering information Type Part no. WLG90T-P420 602280 Other models and
More informationMLV40 Series Miniature Sensors
MLV4 Series Miniature Sensors Diffuse Mode See page 54 Features: Adjustable sensitivity Complementary outputs Sensing Range: 5 mm Outputs: NPN, PNP Thru-Beam Mode See page 57 Rugged metal housing Compact
More informationOnline data sheet WT34-V220 W34 PRODUCT PORTFOLIO
Online data sheet WT4-V0 W4 A B C D E F WT4-V0 W4 Illustration may differ Ordering information Type Part no. WT4-V0 098 Other models and accessories www.sick.com/w4 H I J K L M N O P Q R S T Detailed technical
More informationLaser diffuse reflection light scanner with background suppression. Dimensioned drawing
Specifications and description HRTL 3B Dimensioned drawing We reserve the right to make changes DS_HRTL3B_en_50114049.fm en 03-2013/08 50114049 10-30 V DC 2 khz 10 400(500)mm 170(250)mm with black/white
More informationLaser contrast scanner. Dimensioned drawing
Laser contrast scanner Dimensioned drawing en 06-2016/08 50110624-03 60mm 10-30 V DC Red light laser transmitter Various teach variants Small light spot adjustment via EasyTune Level adaptation for glossy
More informationLeuze electronic. 3 Series. Product description
3 Series Product description Contents: 3 Series - overview and advantages Special features of Series 3 Sensor selection table Data sheets All rights reserved, especially the rights of copying and translation.
More informationOnline data sheet VTF18-4N1212 V18 CYLINDRICAL PHOTOELECTRIC SENSORS
Online data sheet VTF8-4N V8 A B C D E F Illustration may differ Ordering information Type Part no. VTF8-4N 6080 Other models and accessories www.sick.com/v8 H I J K L M N O P R S T Detailed technical
More informationLaser diffuse reflection light scanner with background suppression. Dimensioned drawing
Specifications and description Laser diffuse reflection light scanner with background suppression Dimensioned drawing We reserve the right to make changes DS_HRTL3B_en.fm en 01-2010/12 50114049 10-30 V
More informationRetro-reflective sensors for bottles and tape. Dimensioned drawing
Retro-reflective sensors for bottles and tape Dimensioned drawing en 01-2013/11 50121193 10-30 V DC 0 4.8m 1,5 khz Retro-reflective photoelectric sensors with autocollimation optics for reliable detection
More informationMLV12 Series Dura-Vue TM Sensors
MLV Series Dura-Vue TM Sensors Diffuse Mode with Background Evaluation See page 5 Reliable detection of all surfaces regardless of color or shape Cross-talk immunity Sensing Range: 5 mm Output: -in- Retro-Reflective
More informationOnline data sheet. MLG05S-0895A10802 MLG-2 Prime MEASURING AUTOMATION LIGHT GRIDS
Online data sheet MLG05S-0895A080 MLG- Prime MLG05S-0895A080 MLG- Prime A B C D E F Ordering information Type Part no. MLG05S-0895A080 400 Other models and accessories www.sick.com/mlg-_prime H I J K L
More informationDiffuse reflection light scanner with background suppression. Dimensioned drawing
Leuze electronic HRT 8 Diffuse reflection light scanner with background suppression Dimensioned drawing 1 khz 5 4mm 1-3 V D 2 LS Detection of shining objects djustable background suppression ²LS - active
More informationDistance Sensors BOD 26K.... with optional Master-Slave-Mode
Distance... with optional Master-Slave-Mode Laser Distance The Balluff distance sensor not only detects the presence of objects, but can also indicate their precise position or location. This means the
More informationOptical laser distance sensors. Dimensioned drawing
ODSLR 96B Optical laser distance sensors Dimensioned drawing en 05-2012/11 50110336 60 2000mm 18-30 V DC We reserve the right to make changes DS_ODSLR96BMCV62000_en_50110336.fm Reflection-independent distance
More informationQL50 Luminescence Sensor
Compact, self-contained luminescence sensor LISTED US Compact, self-contained design Features Senses luminescent marks, even on luminescent backgrounds and on reflective surfaces, such as ceramic, metal,
More informationLeuze electronic. Throughbeam photoelectric sensor. Dimensioned drawing. Electrical connection. Accessories: ISO 9001 IP 67
LS 303 Throughbeam photoelectric sensor Dimensioned drawing 1 khz 7m 10-30 V DC A 2 LS l A²LS - active suppression of extraneous light l Activation input for functional testing l Complementary outputs
More informationPROXIMITY SENSOR TERMINOLOGY
Never use this desk reference for installation or operation of equipment. Refer to manual for installation and operation instructions. The following descriptions refer to the European standard EN 60947-5-2.
More informationElectrical connection
Reflection light scanner with fading Dimensioned drawing We reserve the right to make changes DS_FT318_en_50123664.fm en 03-2015/09 50123664 10-30 V D 2 LS 500 Hz 1 280mm 2 120mm (with 90 angular optics)
More informationOnline data sheet. WTR2-P521 ZoneControl PHOTOELECTRIC SENSORS
Online data sheet WTR2-P521 ZoneControl A B C D E F Illustration may differ Ordering information Type Part no. WTR2-P521 1015074 Other models and accessories www.sick.com/zonecontrol H I J K L M N O P
More informationFX-CM. HQ Color Mark Sensor. Model Number Legend SALIENT FEATURES. Sensors. Proximity. Photoelectric. Sensors
HQ Color Mark Sensor SALIENT FEATURES 18mm ±2mm Pushbutton Teach RGB LED light source 8 Remote Memory Setting Shock Resistant casing - 50G Model Number Legend 1 2 3 4 5 1. Series 4. Output FX 2. Type CM:
More informationOnline data sheet. RT-P3221 ZoneControl PHOTOELECTRIC SENSORS
Online data sheet RT-P3221 ZoneControl A B C D E F Illustration may differ Ordering information Type Part no. RT-P3221 1063129 Other models and accessories www.sick.com/zonecontrol H I J K L M N O P Q
More informationThroughbeam photoelectric sensors. Dimensioned drawing. Transmitter/receiver Optical axis LED yellow 90 turning connector. Electrical connection
Specifications and description Leuze electronic LSR 8 Throughbeam photoelectric sensors Dimensioned drawing,5 khz 0-30 V DC A 2 LS A²LS - active suppression of extraneous light Push-pull switching outputs
More informationOnline data sheet VL18-4N3112 V18 PRODUCT PORTFOLIO
Online data sheet VL8-4N V8 VL8-4N V8 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Features Sensor/ detection principle Housing design (light emission) Housing
More informationOperating instructions Contrast sensor O5K / / 2016
Operating instructions Contrast sensor O5K500 707 / 00 / 06 Contents Preliminary note. Symbols used Functions and features Installation. Installation conditions Operating and display elements 5 5 Electrical
More informationUser Manual Laser distance sensor. series OWLE. Welotec GmbH Zum Hagenbach Laer Manual_OWLE _EN 1/20
User Manual Laser distance sensor series OWLE 1/20 English 1 General notes... 3 2 Functional principle... 4 3 Mounting instructions... 4 4 Application hints... 9 5 Teaching the OWLE...11 6 Technical data...17
More informationSENSORS S62. Compact Sensors - S62. The most complete universal sensor in a compact 50x50 mm housing. Sensors with red, infrared LED or LASER emission
Compact Sensors - S6 S6 The most complete universal sensor in a compact x housing Sensors with red, infrared or LASER emission from 3 cm to m Polarized retroreflective up to 0 m Multivoltage 4-40Vac/4-60Vdc
More informationLaser light scanner with background suppression. Dimensioned drawing
Dimensioned drawing We reserve the right to make changes DS_HT10_2M_en_0130293.fm en 01-201/09 0130293 18-30 V DC 0 2000mm The laser light scanner, based on the principle of light propagation time measurement,
More informationLASER. Analog Laser Displacement Transducer. LAM Series. Key-Features: Content:
LASER Analog Laser Displacement Transducer LAM Series Key-Features: Content: Overview, Measuring Principle...2 Installation Instructions...3 Technical Data...4 Technical Drawings.7 Electrical Connection...9
More informationDistance-setting Photoelectric Sensor
Distance-setting Photoelectric Sensor The Combination of the Hyper LED and Shine-proof Achieves both Ease-of-use and High Performance Hyper LED mounted. Finest pin-point beam in the industry allows detection
More informationUltramini clever reliability in confined quarters. Simple installation and operation
Series OU Ultramini clever reliability in confined quarters m Through-beam sensors OUS/OUE up to, m Retro-reflective sensors OUR up to, m Retro-reflective sensors with polarizing filters OUP and OUC up
More informationLong Range Metal Body Sensor
R Long Range Metal Body Sensor 30 m Range With Advanced Fuzzy Logic H Mutual interference protection H NPN/PNP switch selectable output H M12 plug-in connector H Meets IP67 and NEMA 4X, 6P H Vibration
More informationDistance sensors. System description. Distance measurement using triangulation
Distance sensors System description Distance measurement using triangulation The measurement principle of optical triangulation is suitable for the precise determination of distances at close range. With
More information4. Output N: NPN P: PNP
Sensor SALIENT FEATURES Upto 25m sensing Sensitivity Adjustable Light On/Dark On selectable Mutual Interference Prevention Compact; IP65 ( -2M)/ IP67 ( -M8C) Measurement Vision & Safety Model Number Legend
More information