SICK laser competence in photoelectric switches

Transcription

1 Laser photoelectric switches SICK laser competence in photoelectric switches WTL Laser sensors with high beam quality at distances of up to m. WL- Best performance in a metal housing. The original proven in thousands of installations. W90L Standard Easy adjustment and light-/dark-switching using potentiometers. W90L High With display and configurable. As a photoelectric reflex switch, best in class for transparent objects. W9L Laser competence for performance and safety in a compact housing. W00L One of the smallest laser photoelectric switches on the market. W0L Configurable evaluation unit with external laser heads, analogue output and parallel laser line. V8L Family of cylindrical laser photoelectric switches. Laser Class provides safest eye protection. 9 SENSICK CATALOGUE SENSICK CATALOGUE 9

2 WT - Laser photoelectric proximity switches, background suppression - DC Scanning distance mm Photoelectric proximity switches Dimensional drawing.. Laser LED, red light Adjustable background suppression max. 0 0 Adjustments possible WT L-F 0 Standard direction of the material being scanned LED signal strength indicator Optical axis, sender Optic axis, receiver ounting hole l. mm Sensitivity adjustment Connection type WT L-F 0 Laser class See chapter Accessories Cables and connectors ounting systems -pin, L+ 98 SENSICK CATALOGUE

3 WT L- Technical data WT L- F 0 Scanning distance mm, adjustable Light source ), light type LED laser, red light Approx. mm at 00 mm Supply voltage V S V DC ) Residual ripple ) V PP Current consumption ) ma Switching outputs PNP, and Output current I A max. 00 ma Response time ) 00 μs ax. switching frequency ) 000/s Connection type Plug VDE protection class ) Laser class 8) (IEC 8/VDE 08) Circuit protection 9) A, B, C Enclosure rating IP V Ambient temperature T A Operation 0 C...+ C Weight Housing material ) Average service life 0,000 h at T A = + C ) Limit values ) ay not exceed or fall short of V S tolerances Storage 0 C...+ C Approx. 00 g ABS ) Without load ) Signal flight time with ohmic load ) With light/dark ratio : ) Reference voltage 0 V DC 8) Low power. Eyes normally by averting reaction and eyelid closing reflex. 9) A = V S connections reverse-polarity B= Output and short-circuit C = Interference pulse suppression Scanning distance %/90% Order information Type WT L-F 0 Order no (mm) Scanning distance on black, % remission Scanning distance on grey, 8 % remission Scanning distance on white, 90 % remission % of scanning distance 0 8 8%/90% 90%/90% 0 (mm) SENSICK CATALOGUE 99

4 Product group W00 Laser Photoelectric proximity switch energ. Photoelectric reflex switch Through-beam photoelectric switch W00L: Laser Sensor in ini- Format The compact housing creates new applications for laser photoelectric switches where mounting space is at a premium and thus compliments the development trend towards ever more compact machines. Where applications demand it, the sensor can be adapted for light or dark switching by the use of a rotary switch. TThe W00L photoelectric switch series offers laser sensors in a miniature housing. In upgrading the successful W00 series with laser technology, an even wider spectrum of applications can be economically implemented. The small laser light spot and the high switching frequency enable the detection of small objects in highspeed processes. Apart from the benefit to the application, the small and easily visible laser light spot enables easy alignment during installation. The W00L photoelectric switch series comprises: Photoelectric proximity switch WT (energetic) with up to 0 mm scanning distance, Photoelectric reflex switch WL with up to m scanning range, Through-beam photoelectric switch WS/WE with up to m scanning range. 980 SENSICK CATALOGUE

5 W00L m The small beam diameter enables highprecision edge detection. n Even the smallest objects or features can be reliably detected with the precise light spot. m Using the fine laser beam, edge detection can be implemented even with very low object heights SENSICK CATALOGUE 98

6 Photoelectric proximity switch, WT00 Laser, energetic Scanning distance mm Photoelectric proximity switch Dimensional drawing 0 Laser sensor in mini-format Easy alignment by Class red light laser Switching frequency 000 Hz Adjustments possible 8 L D ounting hole Centre of optical axis, receiver Centre of optical axis, sender Connector LED signal strength indicator orange: switching output active LED signal strength indicator green: power on Sensitivity adjustment (0 ) 8 Light/dark rotary switch : L = light-switching, D = dark-switching Connection type WT00L-E WT00L-F WT00L-E WT00L-F WT00L-E WT00L-F See chapter Accessories Connector, 8, -pin Connector, 8, -pin ounting systems x 0.8 mm² L+ 8, -pin L+ 8, -pin L+ wht NC 98 SENSICK CATALOGUE

7 W00 Laser Technical specifications WT00L- E E E F F F Scanning distance typ. max mm ) Operating distance mm ) Adjustment of operating distance Potentiometer Light source, light type Laser diode, Laser, 0 nm ) Laser protection class (IEC 0 8-/C.D.R.H) mm at 00 mm distance Supply voltage V s DC V ) Ripple ± 0 % ) Power consumption 0 ma ) Switching outputs Switching mode Output current I a max NPN, PNP, Light-/dark-switching via rotary switch 00 ma Response time < 0. ms ) Switching frequency,000 Hz ) Connection type Cable, PVC, m 8) Connector, 8, -pin Connector, 8, -pin Circuit protection V s connections reverse-polarity / In-/outputs short-circuit / Outputs overcurrent and short-circuit Enclosure rating IP Ambient temperature operation -0 C C Ambient temperature storage -0 C C Weight Approx. 0 g Approx. 0 g Housing material ABS, PA Included with delivery ounting bracket ) Object with 90 % remission (based on standard white to DIN 0) ) Average service life 0,000 h at T a = + C ) Limit values ) may not exceed or fall short of V s tolerances ) without load ) Signal transit time with resistive load ) with light/dark ratio : 8) do not bend below 0 C Scanning distance / / (mm) WT00 Laser Operating distance Scanning distance typ. max. Scanning range on black, % remission Scanning range on grey, 8 % remission Scanning range on white, 90 % remission Functional reserve 0 % 8% 90% Scanning distance typ. max Operating distance (mm) Sensor Ø mm Ø. mm Ø mm Ø. mm Distance [mm] Ordering information Type Order no. WT00L-E 00 0 WT00L-E 00 0 WT00L-E 00 0 WT00L-F 00 0 WT00L-F 00 0 WT00L-F SENSICK CATALOGUE 98

8 Photoelectric reflex switch, WL00 Laser Scanning range m Photoelectric reflex switch Dimensional drawing 0 Laser sensor in mini-format Easy alignment by Class red light laser Switching frequency 000 Hz Polarisation filter for secure detection of reflective objects Adjustments possible 8 L D. 9.8 ounting hole Centre of optical axis, receiver Centre of optical axis, sender Connector LED signal strength indicator orange: switching output active LED signal strength indicator green: power on Sensitivity adjustment (0 ) 8 Light/dark rotary switch : L = light-switching, D = dark-switching Connection type WL00L-E WL00L-F WL00L-E WL00L-F WL00L-E WL00L-F See chapter Accessories Connector, 8, -pin Connector, 8, -pin ounting systems Reflectors x 0.8 mm² L+ 8, -pin L+ 8, -pin L+ wht NC 98 SENSICK CATALOGUE

9 W00 Laser Technical specifications WL00L- E E E F F F Scanning range typ. max. Scanning range, recommended Relating to Sensitivity adjustment m m Reflector P0 F Potentiometer Light source, light type Laser diode, Laser, 0 nm ) Laser protection class (IEC 0 8-/C.D.R.H) mm at 0 m distance Supply voltage V s DC V ) Ripple ± 0 % ) Power consumption 0 ma ) Switching outputs Switching mode Output current I a max NPN, PNP, Light-/dark-switching via rotary switch 00 ma Response time < 0. ms ) Switching frequency,000 Hz ) Connection type Cable, PVC, m ) Connector, 8, -pin Connector, 8, -pin Circuit protection V s connections reverse-polarity / In-/outputs short-circuit / Outputs overcurrent and short-circuit Enclosure rating IP Ambient temperature operation -0 C C Ambient temperature storage -0 C C Weight Approx. 0 g Approx. 0 g Housing material ABS, PA Included with delivery Reflector P0F + mounting brackets ) Average service life 0,000 h at T a = + C ) Limit values ) may not exceed or fall short of V s tolerances ) without load ) Signal transit time with resistive load ) with light/dark ratio : ) do not bend below 0 C Scanning range and functional reserve WL00 Laser (m) 8 0 Operating range Scanning range typ. max. Reflector type P0F PL0F PL0F Operating range m m m Ø mm Ø mm Functional reserve 0 Operating range Scanning range typ. max (m) 8 0 Sensor Distance [m] Ordering information Type Order no. WL00L-E 00 WL00L-E 00 WL00L-E 00 WL00L-F WL00L-F WL00L-F SENSICK CATALOGUE 98

10 Through-beam photoelectric switch, WS/WE00 Laser Scanning range 0... m Through-beam photoelectric switch Dimensional drawing 0 Laser sensor in mini-format High degree of eye protection by Class red light laser Switching frequency 000 Hz Adjustments possible ounting hole Centre of optical axis Connector LED signal strength indicator orange: switching output active LED signal strength indicator green: power on Sensitivity adjustment (0 ) Light/dark rotary switch: L = light-switching, D = dark-switching L D Connection type WS/WE00L-E WS/WE00L-F WS/WE00L-E WS/WE00L-F WS/WE00L-E WS/WE00L-F Sender x 0.8 mm² 8, -pin 8, -pin L+ L+ NC L+ NC wht NC See chapter Accessories Connector, 8, -pin Connector, 8, -pin ounting systems Receiver x 0.8 mm² 8, -pin 8, -pin L+ L+ wht L+ NC 98 SENSICK CATALOGUE

11 W00 Laser Technical specifications WS/WE00L- E E E F F F Scanning range typ. max. Scanning range, recommended Sensitivity adjustment 0... m m Potentiometer Light source, light type Laser diode, Laser, 0 nm ) Laser protection class (EN 0 8-) 0 mm at 0 m distance Supply voltage V s DC V ) Ripple ± 0 % ) Power consumption 0 ma ) Switching outputs Switching mode Output current I a max NPN, PNP, Light-/dark-switching via rotary switch 00 ma Response time < 0. ms ) Switching frequency,000 Hz ) Connection type Cable, PVC, m ) Connector, 8, -pin Connector, 8, -pin Circuit protection V s connections reverse-polarity / In-/outputs short-circuit / Outputs overcurrent and short-circuit Enclosure rating IP Ambient temperature operation -0 C C Ambient temperature storage -0 C C Weight Approx. 0 g Approx. 0 g Housing material ABS, PA Included with delivery ounting bracket ) Average service life 0,000 h at T a = + C ) Limit values ) may not exceed or fall short of V s tolerances ) without load ) Signal transit time with resistive load ) with light/dark ratio : ) do not bend below 0 C Scanning range and functional reserve (m) WS/WE00 Laser Operating range Scanning range typ. max. 0 Ø 0 mm Ø 0 mm Ø 0 mm Functional reserve Operating range Scanning range typ. max (m) Sensor Distance [m] Ordering information Type Order no. WS/WE00L-E 00 WS/WE00L-E 00 8 WS/WE00L-E 00 9 WS/WE00L-F 00 WS/WE00L-F 00 WS/WE00L-F SENSICK CATALOGUE 98

12 W 9 Laser photoelectric switches Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W 9 L: Laser photoelectric switches: small, light and reliable The W 9 Laser series provides a complete series with innovative laser technology in compact plastic housing. Because our devices are controlled using the most modern μp technology, we can provide a laser series that has excellent performance data in addition to its small size and slight weight. Proximity switch with background suppression, which can be set very precisely, Photoelectric switch with simple Teach-in operation, Through-beam photoelectric switch with simple Teach-in operation, Temperature-compensated laser-protection electronics make constant performance of the laser possible in laser protection class. Objects as small as hairs are detected just as reliably as fast operations are processed. Interference from external light sources is ignored, and cell phones are not detected. Innovative Teach-in technology means a simple push of a button for operating the W 9 Laser series. To ensure that the W 9 Laser series can be used without problems in the whole world, we have complied with all regulations and fulfilled all standards, for example, CE and CDRH. 988 SENSICK CATALOGUE

13 W 9 L b n Precise positioning of stacker cranes using the holes in the carriers. v Lid closed or open. An important issue for automatic wrapping. Two WL 9 lasers provide a reliable solution. v Detection of the leading edge of PCBs. Safely implemented using the small light spot and a precise switching point SENSICK CATALOGUE 989

14 WT 9 Laser Photoelectric proximity switches with background suppression Scanning distance 0 mm Photoelectric proximity switches Dimensional drawing Laser red light, class Background suppression adjustable Switching frequency 000/s Compact housing made of ABS Adjustments possible WT 9L-P0 WT 9L-P0 WT 9L-N0 WT 9L-N0 Centre of optical axis, sender Centre of optical axis, receiver ounting hole Ø. mm Power indicator green; LED signal strength indicator yellow Plug or 8, -pin Scanning distance adjustment CDRH Connection types WT 9L-P0 WT 9L-N0 WT 9L-P0 WT 9L-N0 See chapter Accessories Cables and connectors ounting systems -pin, 8 wht L+ -pin, wht L+ 990 SENSICK CATALOGUE

15 WT 9 L Technical data WT 9L- P0 P0 N0 N0 Scanning distance ) mm, adjustable Supply voltage V S V DC ) Ripple ) < V PP Current consumption ) < ma Light source ), light type Laser, red light; class Focusing position/light spot diameter 0 mm/< 0. mm Switching outputs and PNP NPN PNP; signal voltage HIGH V S V PNP; signal voltage LOW Approx. 0 V NPN; signal voltage HIGH V S NPN; signal voltage LOW ) V S < V Output current I A max. < 00 ma Response time ) < 0. ms ax. switching frequency 8) 000/s Connection types Plug, -pin Plug 8, -pin VDE protection class 9) V (plug ) III (plug 8) Enclosure rating IP Circuit protection 0) A, B, C Ambient temperature T A ) Operation C Storage C Weight with plug Approx. 0 g Housing material ABS ) Object with 90 % remission (based on standard white DIN 0) ) Limit values ) ay not exceed or fall short of V S tolerances ) Without load ) Average service life 0,000 h at T A = + C ) At T A = + C and 00 ma output current ) Signal transit time with resistive load 8) With light/dark ratio : 9) Reference voltage 0 V 0) A=V S connections reverse-polarity B = Outputs reverse-polarity C = Interference pulse suppression ) Do not stack devices Laser protection EN 08-, class CDRH 00.0, class Scanning distance (mm) Operating distance Scanning range on black, % remission Scanning range on grey, 8 % remission Scanning range on white, 90 % remission Scanning range displacement (%) 0 8 Order information Type WT 9L BGS WT 9L-P0 WT 9L-P0 %/90% WT 9L-N0 WT 9L-N0 8%/90% 90%/90% 0 (mm) Order no SENSICK CATALOGUE 99

16 WL 9 Laser Photoelectric reflex switches Scanning range m Photoelectric reflex switches Dimensional drawing Laser red light, class Teach-in Switching frequency 000/s Polarising filter Compact housing made of ABS Adjustments possible WL 9L-P0 WL 9L-P0 WL 9L-N0 WL 9L-N0 Centre of optical axis, sender Centre of optical axis, receiver ounting hole Ø. mm Power indicator green; LED signal strength indicator yellow Plug or 8, -pin Teach-in button CDRH Connection types WL 9L-P0 WL 9L-N0 WL 9L-P0 WL 9L-N0 See chapter Accessories Cables and connectors ounting systems -pin, 8 wht L+ -pin, wht L+ 99 SENSICK CATALOGUE

17 WL 9 L Technical data WL 9L- P0 P0 N0 N0 Scanning range, max. typ./on Reflector 0. m/pl 80 A Supply voltage V S V DC ) Ripple ) Current consumption ) < V PP < ma Light source ), light type Laser 0 mm, red, class Focusing position/light spot diameter Switching outputs and PNP; signal voltage HIGH PNP; signal voltage LOW NPN; signal voltage HIGH NPN; signal voltage LOW ) Output current I A max. Response time ) /min. < mm PNP NPN V S V Approx. 0 V V S V S V < 00 ma < 0. ms ax. switching frequency ) 000/s Connection types Plug, -pin Plug 8, -pin VDE protection class 8) V (plug ) Enclosure rating Circuit protection 9) III (plug 8) IP, IP 9 K A, B, C Ambient temperature T A 0) Operation C Weight with plug Housing material ) Limit values ) ay not exceed or fall short of V S tolerances ) Without load Storage... + C Approx. 0 g ABS ) Average service life 0,000 h at T A = + C ) At T A = + C and 00 ma output current ) Signal transit time with resistive load ) With light/dark ratio : 8) Reference voltage 0 V 9) A=V S connections reverse-polarity B = Outputs reverse-polarity C = Interference pulse suppression 0) Do not stack devices Teach-in function standard. Align the photoelectric switch with the reflector. LED yellow/green = on.. Press Teach-in button > s. LED green = off/on. Teach-in is initiated. LED yellow/green = blinking.. The signal is stored permanently after you release the button. The switching threshold is set to standard sensitivity. Laser protection Precise setting:. Align the photoelectric switch with the reflector. LED yellow/green = on.. Press Teach-in button > s. LED green = off/on. Teach-in is initiated. LED yellow/green = blinking.. The signal is stored permanently after you release the button. The switching threshold is set to a low degree of sensitivity (detection of transparent objects is possible). EN 08-, class CDRH 00.0, class Scanning range (m) 8 0 Operating range Scanning range, max. typical Reflector type Operating range PL 80 A m PL 0 F 0.0 m PL 0 A 0.0 m PL 0 A 0.0 m PL 0 A 0.0 m PL 0 A 0.0 m PL 0 F 0.0 m 8 Reflective tape 0. m 00 0 Operating reserve Operating range 8 Scanning range, max. typ. (m) 8 0 Order information Type Order no. WL 9L-P0 0 9 WL 9L-P WL 9L-N WL 9L-N SENSICK CATALOGUE 99

18 WS/WE 9 Laser Through-beam photoelectric switches, Teach-in Scanning range m Through-beam photoelectric switches Dimensional drawing Laser red light, class Teach-in Switching frequency 000/s Compact housing made of ABS WS WE Adjustments possible WS/WE 9L-P0 WS/WE 9L-N0 WS/WE 9L-P0 WS/WE 9L-N0 Centre of optical axis ounting hole Ø. mm Power indicator green, WS in operation LED signal strength indicator yellow Plug or 8, -pin Teach-in button Sender WS Receiver WE Connection types WS/WE 9L-P0 WS/WE 9L-N0 WS/WE 9L-P0 WS/WE 9L-N0 CDRH -pin, 8 -pin, See chapter Accessories Cables and connectors ounting systems Sender wht L+ NC NC wht L+ NC NC Receiver L+ L+ wht wht 99 SENSICK CATALOGUE

19 WS/WE 9 L Technical data WS/WE 9L- P0 P0 N0 N0 Scanning range, max. typ. 0 m Supply voltage V S V DC ) Ripple ) < V PP Current consumption ) < ma (WE), < ma (WS) Light source ), light type Laser, red, class Focusing position/light spot diameter 00 mm/< 0. mm Switching outputs and PNP NPN PNP; signal voltage HIGH V S V PNP; signal voltage LOW Approx. 0 V NPN; signal voltage HIGH V S NPN; signal voltage LOW ) V S V Output current I A max. < 00 ma Response time ) < 0. ms ax. switching frequency ) 000/s Connection types Plug, -pin Plug 8, -pin VDE protection class 8) V (plug ) III (plug 8) Enclosure rating IP Circuit protection 9) A, B, C Ambient temperature T 0) A Operation C Storage C Weight with plug Approx. 0 g Housing material ABS ) Limit values ) ay not exceed or fall short of V S tolerances ) Without load ) Average service life 0,000 h at T A = + C ) At T A = + C and 00 ma output current ) Signal transit time with resistive load ) With light/dark ratio : 8) Reference voltage 0 V 9) A=V S connections reverse-polarity B = Outputs reverse-polarity C = Interference pulse suppression 0) Do not stack devices Teach-in function standard. Align the sender and receiver with respect to each other. Receiver LED yellow/green = on.. Press Teach-in button > s. LED green = off/on. Teach-in is initiated. LED yellow/green = blinking.. The signal is stored permanently after you release the button. The switching threshold is set to standard sensitivity. Precise setting:. Align the sender and receiver with respect to each other. Receiver LED yellow/green = on.. Press Teach-in button > s. LED green = off/on. Teach-in is initiated. LED yellow/green = blinking.. The signal is stored permanently after you release the button. The switching threshold is set to a low degree of sensitivity (detection of transparent objects is possible). Laser protection EN 08-, class CDRH 00.0, class Scanning range (m) Order information Type WS/WE 9L-P0 WS/WE 9L-P0 WS/WE 9L-N0 WS/WE 9L-N0 Order no Operating range/scanning range, max. typical SENSICK CATALOGUE 99

20 Product group W0 Laser Photoelectric proximity switch energ. Photoelectric reflex switch Through-beam photoelectric switch W0 Laser - Customised through configuration, and small format through external laser heads Included in the system The sensor heads offered, comprise a photoelectric proximity switch, a photoelectric reflex switch and two through-beam photoelectric switches with small laser spot or a parallel laser line 0 mm in width. The combination of the analogue output and two switching outputs is the basis for a variety of application solutions, such as edge control or sorting parts. TThe solution for customer-specific requirements: configurable evaluation units with digital and analogue outputs and external laser heads. By separating optics and evaluation, the W0L offers compact laser sensors with extensive functionality, allowing the configuration-based setup of application-specific sensor functions. Fast and easy commissioning is implemented by clear Teach-in functions. Application-oriented, easy commissioning or point Teach-in: for the safe Teach-in of switching points, Auto Teach-in: for Teach-in during a running process, Zone Teach-in: for the Teach-in of an upper and lower switching threshold, Transparent Teach-in: for transparent objects such as bottles or films. 99 SENSICK CATALOGUE

21 W0L m Extensive choice of sensor heads for versatile applications, amongst others with parallel laser line 0 mm wide. Reliable detection of small objects and features, respectively, with W0 Laser SENSICK CATALOGUE 99

22 Photoelectric proximity switch, WT0L, energetic Scanning distance 0...,00 mm Photoelectric proximity switch Dimensional drawing 9... ø.. Laser sensor in a compact housing Easy alignment through red light laser Class Coaxial light path Configuration via amplifier unit ø.... Through-hole Ø. mm Optical axis Indicator LED green: operational status indicator Indicator LED orange: switching output Connection type WT0L- 998 SENSICK CATALOGUE

23 W0 Laser Technical specifications WT0L- Sensor head Operation in combination with amplifier unit WI0 Scanning distance typ. max. 0...,00 mm ) Operating distance 0...,000 mm ) Light source, light type Laser, red light ) Laser protection class (IEC 0 8-/C.D.R.H) mm at m distance Supply voltage V s See amplifier unit WI0 Switching outputs See amplifier unit WI0 Connection type Cable with plug, PVC/PBT, m ) VDE protection class Enclosure rating IP Ambient temperature operation -0 C... + C Ambient temperature storage - C C Weight Approx. g Housing material PC, polycarbonate, glass ) Object with 90 % remission (based on standard white to DIN 0). Scanning Scanning distance and operating reserve distance depends on chosen operating mode ) Average service life 0,000 h at T a = + C ) Connection between sensor head and amplifier unit with system specific plug. Do not bend cable below 0 C ode: Long ode: Standard ode: Fast WT0LLong WT0 L Standard WT0 L Fast 0 90% % Operating reserve 8% % Scanning distance typ. max. (mm) Operating reserve Scanning distance typ. max. (mm) Operating reserve 8% % Scanning distance typ. max. (mm) (mm) Operating distance Scanning distance typ. max (mm) Operating distance Scanning distance typ. max (mm) Operating distance Scanning distance typ. max. Scanning distance on white, 90 % remission Scanning distance on grey, 8 % remission Scanning distance on black, % remission Scanning distance on white, 90 % remission Scanning distance on grey, 8 % remission Scanning distance on black, % remission Scanning distance on white, 90 % remission Scanning distance on grey, 8 % remission Scanning distance on black, % remission WT0 L Ordering information Type Order no. WT0L (mm) (mm) SENSICK CATALOGUE 999

24 Photoelectric reflex switch, WL0L Scanning range m Photoelectric reflex switch Dimensional drawing 9... ø.. Laser sensor in a compact housing Easy alignment through red light laser Class Coaxial light path Configuration via amplifier unit Line laser through line attachment ø.... Through-hole Ø. mm Optical axis Indicator LED green: operational status indicator Indicator LED orange: switching output Connection type WL0L- See chapter Accessories asks Reflectors 000 SENSICK CATALOGUE

25 W0 Laser Technical specifications WL0L- Sensor head Operation in combination with amplifier unit WI0 Scanning range typ. max m Scanning range, recommended 0... m Laser line through lens Laser line dimension x 0. mm at 00 mm distance Light source, light type Laser, red light ) Laser protection class (IEC 0 8-/C.D.R.H) mm in m Entfernung Polarisation filter Supply voltage V s See amplifier unit WI0 Switching outputs See amplifier unit WI0 Connection type Cable with plug, PVC/PBT, m ) VDE protection class Enclosure rating IP Ambient temperature operation -0 C... + C Ambient temperature storage - C C Weight Approx. g Housing material PC, polycarbonate, PA Included with delivery Reflector PF ) Average service life 0,000 h at T a = + C ) Connection between sensor head and amplifier unit with system specific plug. do not bend cable below 0 C Scanning range and operating reserve ode: Long ode: Standard ode: Fast WL0LLong WL0 L Standard WL0 L Fast 0 90% 0 % 90% 0 90% Operating reserve 8% % Scanning range typ. max. (m) 8 0 Operating reserve 8% Scanning range typ. max. (m) Operating reserve 8% % Scanning range typ. max. (m) , , 0,8 0, ,8 0 (m) (m) 0 (m) 0,,, Operating range Scanning range typ. max. Operating range Scanning range typ. max. Operating range Scanning range typ. max. Reflector type PF (without tip adapter lens) PF (with area tip adapter lens) PF (with line tip adapter lens) Operating range 0... m m 0... m Reflector type PF (without tip adapter lens) PF (with area tip adapter lens) PF (with line tip adapter lens) Operating range 0... m m m Reflector type PF (without tip adapter lens) PF (with area tip adapter lens) PF (with line tip adapter lens) Operating range 0... m m ,8 m 0 8 WL0 L Ordering information Type Order no. WL0L (mm) SENSICK CATALOGUE 00 (m) 8 0

26 Through-beam photoelectric switch, WS/WE0L SPOT Scanning range m Through-beam photoelectric switch Dimensional drawing 9... ø.. Laser sensor in a compact housing Eye safe (Class ) red light laser Configuration via amplifier unit ø.... Through-hole Ø. mm Optical axis Indicator LED green: operational status indicator Indicator LED orange: switching output Connection type WS/WE0L- WS/WE0L- 00 SENSICK CATALOGUE

27 W0 Laser Technical specifications WS/WE0L- Sensor head Operation in combination with amplifier unit WI0 Scanning range typ. max m Scanning range, recommended 0... m Light source, light type Laser, red light ) Laser protection class (EN 0 8-) mm at m distance Supply voltage V s See amplifier unit WI0 Switching outputs See amplifier unit WI0 Connection type Cable with plug, PVC/PBT, m ) Cable with plug and coupling, PVC/PBT, m ) VDE protection class Enclosure rating IP Ambient temperature operation -0 C... + C Ambient temperature storage - C C Weight Approx. 0 g Housing material PC, polycarbonate, PA ) Average service life 0,000 h at T a = + C ) Connection between sensor head and amplifier unit with system specific plug. Do not bend cable below 0 C ) System cable 8, m necessary for connection. Included with delivery. Do not bend cable below 0 C Scanning range and operating reserve WSE0 L / 0 (m) Operating range Scanning range typ. max. Operating reserve Scanning range typ. max. (m) WSE0 L / (mm) (m) 0,,,, Ordering information Type Order no. WS/WE0L WS/WE0L SENSICK CATALOGUE 00

28 Through-beam photoelectric switch, WS/WE0L LINE Scanning range m Through-beam photoelectric switch Parallel laser line 0 mm wide Dimensional drawing.9.9. ø Range up to m Eye safe (Class ) red light laser Configuration via amplifier unit enables application solutions such. as edge control and detection of objects with position tolerance ø.,,, Through-hole Ø. mm Parallel laser line Indicator LED green: operational status indicator Indicator LED orange: switching output Connection type WS/WE0L- WS/WE0L- 00 SENSICK CATALOGUE

29 W0 Laser Technical specifications WS/WE0L- Sensor head Operation in combination with amplifier unit WI0 Scanning range typ. max m Scanning range, recommended 0... m Laser line dimension 0 x. mm parallel Light source, light type Laser, red light ) Laser protection class (EN 0 8-) Supply voltage V s See amplifier unit WI0 Switching outputs See amplifier unit WI0 Connection type Cable with plug, PVC/PBT, m ) Cable with plug and coupling, PVC/PBT, m ) VDE protection class Enclosure rating IP Ambient temperature operation -0 C... + C Ambient temperature storage - C C Weight Approx. 00 g Housing material PC, polycarbonate, PA ) Average service life 0,000 h at T a = + C ) Connection between sensor head and amplifier unit with system specific plug. Do not bend cable below 0 C ) System cable 8, m necessary for connection. Included with delivery. Do not bend cable below 0 C Scanning range and operating reserve WSE0 L / 0 (m) Operating range Scanning range typ. max. Operating reserve Scanning range typ. max. (m) WSE0 L / (mm) (m) 0,,,, Ordering information Type Order no. WS/WE0L WS/WE0L SENSICK CATALOGUE 00

30 Amplifier unit, WI0T, with switching output Dimensional drawing 8. Provision of varied functions for configuration Easy commissioning 0. Display for operational status indicator and operator guidance Switching and analogue outputs Switching frequency up to 8. khz ø... Adjustments possible Protective hood; can be folded open (80 approx.) ounting bracket (included with delivery) Connection Connection for sensor heads Indicator LED: output Indicator LED: laser active Indicator LED: output 8 Display: measurement value 9 Display: switching point 0 Indicator: SET active Indicator LED: output or activated Function key Function key Teach-in key Set/Run selector switch Operating key Connection type WI0T-P0 WI0T-N0 See chapter Accessories Connector, 8, -pin ale bus connector for ounting systems 8, -pin wht L+ EL 00 SENSICK CATALOGUE

31 W0 Laser Technical specifications WI0T- P0 N0 Amplifier unit Operation in combination with sensor heads from the W0L series Adjustment of operating distance Teach-in: teach button & cable (ET) Supply voltage V s DC... V ) Power consumption 0 ma Switching outputs PNP, NPN, Switching mode Programmable/configurable Output current I a max 00 ma Response time 0 µs / 00 µs / ms Time delay On / Off Delay, s Connection type Connector, 8, -pin VDE protection class Circuit protection V s connections reverse-polarity / Output short-circuit Enclosure rating IP 0 Ambient temperature operation - C... + C ) Ambient temperature storage -0 C C Weight Approx. 0 g Housing material PPE / PC Included with delivery ounting bracket ) ± 0 % ) more than devices mounted as a block max 0 C Ordering information Type Order no. WI0T-P0 0 8 WI0T-N SENSICK CATALOGUE 00

32 Amplifier unit, WI0L, with switching and analogue output Dimensional drawing 8. Provision of varied functions for configuration Easy commissioning 0. Display for operational status indicator and operator guidance Switching and analogue outputs Switching frequency up to 8. khz ø... Adjustments possible Protective hood; can be folded open (80 approx.) ounting bracket (included with delivery) Connection Connection for sensor heads Indicator LED: output Indicator LED: laser active Indicator LED: output 8 Display: measurement value 9 Display: switching point 0 Indicator: SET active Indicator LED: output or activated Function key Function key Teach-in key Set/Run selector switch Operating key Connection type WI0T-N0 WI0T-P0 See chapter Accessories ale bus connector ounting systems wire wht wht gra L+ A GROUND Ei 008 SENSICK CATALOGUE

33 W0 Laser Technical specifications WI0T- N0 P0 Amplifier unit Operation in combination with sensor heads from the W0L series Adjustment of operating distance Teach-in: teach button & cable (ET) Supply voltage V s DC... V ) Power consumption 0 ma Switching outputs NPN,, and analogue output PNP,, and analogue output Switching mode Programmable/configurable Output current I a max 00 ma Response time 0 µs / 00 µs / ms Time delay On / Off Delay, s Connection type Cable, PVC/PBT, m VDE protection class Circuit protection V s connections reverse-polarity / Output short-circuit Enclosure rating IP 0 Ambient temperature operation - C... + C ) Ambient temperature storage -0 C C Weight Approx. 80 g Housing material PPE / PC Included with delivery ounting bracket ) ± 0 % ) more than devices mounted as a block max 0 C Ordering information Type Order no. WI0T-N0 0 8 WI0T-P SENSICK CATALOGUE 009

34 W 90 Laser photoelectric switches Standard Series BGS Photoelectric proximity switches Photoelectric reflex switches Through-beam photoelectric switches W 90 L Standard Series: Laser Technology at economical prices DDo your customers require reliable, economical Laser Technology for standard applications? The photoelectric switches W 90 L series with laser technology are reliable, user friendly and economical. All sensors have red-light laser diodes, which conform to Protection Class. The precise visible light spot allows fast and accurate alignment of the sensors to the target. The small light spot allows the reliable detection of even the smallest objects. The sensors fast response times make them ideal for most highspeed applications. A standard feature is the light/dark selector switch, providing great flexibility and allowing the W 90 L to be adapted to a wide variety of applications. The option of a rotating 8 connector or m cable version is available as standard, and yellow and green LEDs provide practical and user friendly assistance with commissioning and calibration. The compact, industry-standard plastic housing permits the use of the device even in harsh environments. WTB 90 L, with precise, adjustable background suppression (BGS), is available with two different scanning ranges. WL 90 L, with precision autocollimated optics, enables the reliable detection of small objects, even at close range. WS/WE 90 L, ideal for applications requiring a large system reserve. 00 SENSICK CATALOGUE

35 W 90 Laser Standard Serie WS/WE 90 L: Detection of overheight sheet metal parts. Sector: etal working. WTB 90 T: Wire break test. Sector: Assembly technology. WL 90 L: Component detection, e.g components for bearings. Sector: Assembly technology. WS/WE 90 L: Completeness check. In this example: Is the product in the outer packaging? Sector: Packaging industry SENSICK CATALOGUE 0

36 WTB 90 L Photoelectric proximity switches, background suppression, distant range, laser Scanning distance mm Photoelectric proximity switches Dimension illustration Laser LED, visible red light, Class User friendly sensor, easily aligned and set up Precise background suppression Set via rotary switch Selectable output: Light/dark switching Setting options All types Standard direction of the material being scanned Centre of optical axis, sender Centre of optical axis, receiver ounting holes, Ø approx.. mm Plug -pin, 8, 90 rotatable or cable m, -wire Status indicator LED, yellow: Output active Status indicator LED, green: Laser on Scanning range adjustment L.ON/D.ON selection switch L D 9 Connection types WTB 9OL-P WTB 9OL-N WTB 9OL-P 0 WTB 9OL-N 0 CDRH Accession Number 0 Laser class See chapter Accessories Cables and connectors ounting systems x 0.8 mm -pin, 8 L+ L+ NC 0 SENSICK CATALOGUE

37 WTB 90 L Technical data WTB 90 L- P P 0 N N 0 Scanning distance, adjustable mm ) Adjustment Potentiometer, turns volume Light source ) Laser, red light; class. mm at distance of 00 mm Supply voltage V S V DC ) Ripple ) ±0% Current consumption ) ax. 0 ma Switching outputs PNP NPN Output current I A max. < 00 ma Switching mode Light/dark mode ), selectable Response time ) 0. ms Switching frequency max. 8) 00/s Connection types Cable -wire 9) Plug -pin, 8 VDE protection class 0) Circuit protection ) A, B Enclosure rating IP Ambient temperature Operation C Storage C Weight With cable m approx. 00 g With plug approx. 0 g Housing material Housing: ABS; optic: PA ) Object with 90 % reflectance (with reference to standard white according to DIN 0) ) Average service life 0,000 h at T A = + C ) Limit values ) ust be within V S tolerances ) Without load ) Via select button ) With resistive load 8) With light/dark ratio : 9) Do not bend below 0 C 0) Reference voltage 0 V DC ) A=V S connections reverse-polarity B = Output short-circuit Scanning distance Sensor (mm) Operating distance Scanning distance, max. typical Scanning range on white, 90 % remission Scanning range on grey, 8 % remission Scanning range on black, % remission Ø.0 mm Ø. mm Ø. mm % of scanning distance 0 WTB 90 L Long range 0 %/90% 0 0 8%/90% 90%/90% 0 [mm] Order information * ) Type Order no. WTB 9OL-P 0 WTB 9OL-P 0 0 WTB 9OL-N 0 WTB 9OL-N 0 0 * ) Equipment model with m PVC cable or 8 plug, -pin on request 00 Distance [mm] SENSICK CATALOGUE 0

38 WTB 90 L Photoelectric proximity switches, background suppression, close range, laser Scanning distance mm Photoelectric proximity switch Dimension illustration Laser LED, visible red light, Class User friendly sensor, easily aligned and set up Precise background suppression Set via rotary switch Selectable output: Light/dark switching Setting options All types Standard direction of the material being scanned Centre of optical axis, sender Centre of optical axis, receiver ounting holes, Ø approx.. mm Plug -pin, 8, 90 rotatable or cable m, -wirer Status indicator LED, yellow: Output active Status indicator LED, green: Laser on Scanning range adjustment L.ON/D.ON selection switch L D 9 Connection types WTB 9OL-P WTB 9OL-N WTB 9OL-P 0 WTB 9OL-N 0 CDRH Accession Number 0 Laser class See chapter Accessories Cables and connectors ounting systems x 0.8 mm -pin, 8 L+ L+ NC 0 SENSICK CATALOGUE

39 WTB 90 L Technical data WTB 90 L- P P 0 N N 0 Scanning distance, adjustable mm ) Adjustment Potentiometer, turns volume Light source ) Laser, red light; class mm at distance of 80 mm Supply voltage V S V DC ) Ripple ) ±0% Current consumption ) ax. 0 ma Switching outputs PNP NPN Output current I A max. < 00 ma Switching mode Light/dark mode ), selectable Response time ) 0. ms Switching frequency max. 8) 00/s Connection types Cable -wire 9) Plug -pin, 8 VDE protection class 0) Circuit protection ) A, B Enclosure rating IP Ambient temperature Operation C Storage C Weight With cable m approx. 00 g With plug approx. 0 g Housing material Housing: ABS; optic: PA ) Object with 90 % reflectance (with reference to standard white according to DIN 0) ) Average service life 0,000 h at T A = + C ) Limit values ) ust be within V S tolerances ) Without load ) Via select button ) With resistive load 8) With light/dark ratio : 9) Do not bend below 0 C 0) Reference voltage 0 V DC ) A=V S connections reverse-polarity B = Output short-circuit Scanning distance 0 00 Sensor (mm) Operating distance Scanning distance, max. typical Scanning range on white, 90 % remission Scanning range on grey, 8 % remission Scanning range on black, % remission Ø.0 mm Ø. mm Ø.0 mm Ø. mm 0 0 % of scanning distance WTB 90 L Short range %/90% 8%/90% [mm] %/90% Order information * ) Type Order no. WTB 9OL-P 0 9 WTB 9OL-P WTB 9OL-N 0 WTB 9OL-N * ) Equipment model with m PVC cable or 8 plug, -pin on request Distance [mm] SENSICK CATALOGUE 0

40 WL 90 L Photoelectric reflex switches, laser Scanning range m Photoelectric reflex switches Dimension illustration Laser LED, visible red light, Class User friendly sensor, easily aligned and set up Sensitivity setting via rotary switch Precision auto-collimated optics Selectable output: Light/dark switching Setting options All types Centre of optical axis ounting holes, Ø approx.. mm Plug -pin, 8, 90 rotatable or cable m, -wire Status indicator LED, yellow: Output active Status indicator LED, green: Laser on Sensitivity control L.ON/D.ON selection switch L D Connection types WL 90L-P WL 90L-P 0 WL 90L-N WL 90L-N 0 CDRH Accession Number 0 Laser class See chapter Accessories Cables and connectors ounting systems Reflectors x 0.8 mm -pin, 8 L+ L+ NC 0 SENSICK CATALOGUE

41 WL 90 L Technical data WL 90L- P P 0 N N 0 Scanning range, max. typical/on refl. ) m/p 0 F Sensitivity, adjustable Potentiometer, turn volume Light source ) Laser, red light; class mm at distance of m Supply voltage V S V DC ) Ripple ) ±0% Current consumption ) ax. 0 ma Switching outputs PNP NPN Output current I A max. < 00 ma Switching mode Light/dark mode ), selectable Response time ) < 0. ms Switching frequency max. 8) 000/s Connection types Cable -wire 9) Plug -pin, 8 VDE protection class 0) Circuit protection ) A, B Enclosure rating IP Ambient temperature Operation C Storage C Weight With cable m approx. 00 g With plug approx. 0 g Housing material Housing: ABS; optic: PA ) Reflector P 0 F included with delivery ) Average service life 0,000 h at T A = + C ) Limit values ) ust be within V S tolerances ) Without load ) Via select button ) With resistive load 8) With light/dark ratio : 9) Do not bend below 0 C 0) Reference voltage 0 V DC ) A=V S connections reverse-polarity B = Output short-circuit Scanning range WL 90 L Order information * ) Type Order no. WL 9OL-P 0 WL 9OL-P WL 9OL-N 0 WL 9OL-N 0 0 Sensor 0 (m) Reflector type P 0 F PL 0 F PL 0 F Operating range Operating range m m m Scanning range, max. typical Ø mm Ø 0 mm Ø mm Operating reserve 0 [m] Operating range * ) Equipment model with m PVC cable or 8 plug, -pin on request Distance [m] SENSICK CATALOGUE 0

42 WS/WE 90 L Through-beam photoelectric switches, laser Scanning range m Through-beam photoelectric switches Dimension illustration Laser LED, visible red light, Class User friendly sensor, easily aligned and set up Sensitivity setting via rotary switch Precision auto-collimated optics Selectable output: Light/dark switching Setting options All types Centre of optical axis ounting holes, Ø approx.. mm Plug -pin, 8, 90 rotatable or cable m, -wire Status indicator LED, yellow: Output active Status indicator LED, green: Laser on Sensitivity control L.ON/D.ON selection switch L D Connection types WS/WE 90L-P WS/WE 90L-N WS/WE 90L-P 0 WS/WE 90L-N 0 CDRH Accession Number 0 Laser class See chapter Accessories Cables and connectors ounting systems x 0.8 mm x 0.8 mm -pin, 8 Sender Receiver Sender L+ L+ wht L+ NC NC -pin, 8 Receiver wht L+ NC 08 SENSICK CATALOGUE

43 WS/WE 90 L Technical data WS/WE 90L- P P 0 N N 0 Scanning range, max. typical 0 m, adjustable Sensitivity, adjustable Potentiometer, turn volume Light source ) Laser, red light; class 0 mm at distance of 0 m Supply voltage V S V DC ) Ripple ) ±0% Current consumption ) ax. 0 ma Switching outputs PNP NPN Output current I A max. < 00 ma Switching mode Light/dark mode ), selectable Response time ) < 0. ms Switching frequency max. ) 000/s Connection types Cable -wire 8) Plug -pin, 8 VDE protection class 9) Circuit protection 0) A, B Enclosure rating IP Ambient temperature Operation C Storage C Weight With cable m approx. 00 g With plug approx. 0 g Housing material Housing: ABS; optic: PA ) Average service life 0,000 h at T A = + C ) Limit values ) ust be within V S tolerances ) Without load ) Via select button ) With resistive load ) With light/dark ratio : 8) Do not bend cable below 0 C 9) Reference voltage 0 V DC 0) A=V S connections reverse-polarity B = Output short-circuit Scanning range and operating reserve (m) Operating range Scanning range, max. typical 0 00 WS/WE 90 L Order information * ) Type WS/WE 90L-P WS/WE 90L-P0 WS/WE 90L-N WS/WE 90L-N0 Order no * ) Equipment model with m PVC cable or 8 plug, -pin on request Ø 0 mm Ø 80 mm Ø 0 mm Ø 0 mm 0 Sensor Distance [m] Operating reverse [m] 0 0 Operating range SENSICK CATALOGUE 09

44 W 90 Laser photoelectric switches High Grade Photoelectric proximity switches BGS/FGS Photoelectric reflex switches W 90 L High Grade: Application-based Laser Technology, the optimum solution for demanding applications objects or foils provide a secure switching signal. Automatic switching threshold tracking ensures high availability and long maintenance intervals in industrial environments. DDemanding tasks with customised functionality of the sensor are typical requirements. With the W 90TL series of laser sensors, we have a convincing answer. The sensors can be configured via a function menu with display and have a red light laser of protection class. This ensures a precise, clearly visible light spot which enables fast and exact alignment even for smallest objects. Through the configuration menu, the WTB 90TL photoelectric proximity switch with COS receiver line enables flexible selection of the operating and Teach-in modes. Foreground and background suppression modes are available. Further configurable functions of the W 90L High Grade series: On/off delay up to 0 s; one shot signal, light-/dark switching, External Teach-in or Teach-in by keystroke, Exact adjustment of the switching threshold down to the last digit, keylock. The WLG 90T photoelectric reflex switch is one of the most powerful sensors for transparent objects. Even highly transparent 00 SENSICK CATALOGUE

45 W 90 Laser High Grade v WTB 90TL: Precise presence check for small components. v WTB 90TL: Position Teach-in, BGS mode, checking presence. Sector: Electronic and semiconductor industry. v WLG 90T: Ampoule syringes and breakage test. Sector: Pharmaceutical industry. v WLG 90T: Transparent bottles. Sector: Bottling SENSICK CATALOGUE 0

46 WTB 90TL Photoelectric proximity switch, background/foreground suppression, long range, Teach-in Scanning distance mm Photoelectric proximity switches Dimensional drawing Laser LED, visible red light, Class Scanning distance adjustment by Teach-in function Programmable background or foreground suppression Programmable output: light/dark switching Numeric display with menu prompts , Adjustments possible All types Standard direction of the material being scanned Centre of optical axis, sender Centre of optical axis, receiver ounting holes, Ø approx.. mm +/ button; select mode button Teach-in button Plug -pin, 8, 90 rotatable or cable m, -wire Status indicator LED, green: Laser on Status indicator LED, yellow: output active Numerical display Connection types WTB 9OTL-P WTB 9OTL-N WTB 9OTL-P 0 WTB 9OTL-N 0 CDRH Accession Number 0 Laser class See chapter Accessories Cables and connectors ounting systems x 0.8 mm -pin, 8 gra *) *) L+ L+ ET ET *) Adjustment via External Teach (ET) PNP L+ NPN 0 SENSICK CATALOGUE

47 WTB 90TL Technical data WTB 90TL- P P 0 N N 0 Scanning distance, adjustable mm ) Device function mode BGS ) or FGS ), programmable Scanning distance, adjustable Teach-in, External Teach (ET) Teach-in via button, menu guided Threshold, precise setting anually adjustable Light source ) Laser, red light; class. mm at distance of 00 mm Supply voltage V S V DC ) Ripple ) ±0% Current consumption ) ax. 0 ma Switching outputs PNP NPN Output current I A max. < 00 ma Switching type Light-/dark-switching, programmable Response time 8). ms Switching frequency max. 9) 00/s Timer mode (dly) s, programmable Timer function Nor: normal ode Ond: On Delay ode, on delay OFd: Off Delay ode, off delay OnE: One Shot ode, one shot Numerical display monitoring Threshold, distance, mode selection Connection types Cable -wire 0) Plug -pin, 8 VDE protection class ) Circuit protection ) A, B Enclosure rating IP Ambient temperature Operation C Storage C Weight With cable m approx. 00 g With plug approx. 0 g Housing material Housing: ABS; optic: PA ) Object with 90 % reflectance (with reference to standard white according to DIN 0) ) Background suppression ) Foreground suppression ) Average service life 0,000 h at T A = + C ) Limit values ) ust be within V S tolerances ) Without load 8) With resistive load 9) With light/dark ratio : 0) Do not bend below 0 C ) Reference voltage 0 V DC ) A=V S connections reverse-polarity B = Output short-circuit Scanning distance Sensor (mm) Operating distance Ø. mm Ø.9 mm Ø. mm Ø. mm Ø. mm 0 0 Scanning distance, max. typical Scanning range on white, 90 % remission Scanning range on grey, 8 % remission Scanning range on black, % remission % of scanning distance 0 WTB 90TL Long range 0 0 %/90% 8%/90% 0 90%/90% 0 [mm] Order information * ) Type Order no. WTB 9OTL-P 0 WTB 9OTL-P 0 0 WTB 9OTL-N 0 WTB 9OTL-N 0 0 * ) Equipment model with m PVC cable or 8 plug, -pin on request Distance [mm] SENSICK CATALOGUE 0

48 WTB 90TL Photoelectric proximity switch, background/foreground suppression, short range, Teach-in Scanning distance mm Photoelectric proximity switches Dimensional drawing Laser LED, visible red light, Class Scanning distance adjustment by Teach-in function Programmable background or foreground suppression Programmable output: light/dark switching Numeric display with menu prompts , Adjustments possible All types Standard direction of the material being scanned Centre of optical axis, sender Centre of optical axis, receiver ounting holes, Ø approx.. mm +/ button; select mode button Teach-in button Plug -pin, 8, 90 rotatable or cable m, -wire Status indicator LED, green: Laser on Status indicator LED, yellow: output active Numerical display Connection types WTB 9OTL-P WTB 9OTL-N WTB 9OTL-P 0 WTB 9OTL-N 0 CDRH Accession Number 0 Laser class See chapter Accessories Cables and connectors ounting systems x 0.8 mm -pin, 8 gra *) *) L+ L+ ET ET *) Adjustment via External Teach (ET) PNP L+ NPN 0 SENSICK CATALOGUE

49 WTB 90TL Technical data WTB 90TL- P P 0 N N 0 Scanning distance, adjustable mm ) Device function mode BGS ) or FGS ), programmable Scanning distance, adjustable Teach-in, External Teach (ET) Teach-in via button, menu guided Threshold, precise setting anually adjustable Light source ) Laser, red light; class 0.8 mm at distance of 80 mm Supply voltage V S V DC ) Ripple ) ±0% Current consumption ) ax. 0 ma Switching outputs PNP NPN Output current I A max. < 00 ma Switching type Light-/dark-switching, programmable Response time 8). ms Switching frequency max. 9) 00/s Timer mode (dly) s, programmable Timer function Nor: normal ode Ond: On Delay ode, on delay OFd: Off Delay ode, off delay OnE: One Shot ode, one shot Numerical display monitoring Threshold, distance, mode selection Connection types Cable -wire 0) Plug -pin, 8 VDE protection class ) Circuit protection ) A, B Enclosure rating IP Ambient temperature Operation C Storage C Weight With cable m approx. 00 g With plug approx. 0 g Housing material Housing: ABS; optic: PA ) Object with 90 % reflectance (with reference to standard white according to DIN 0) ) Background suppression ) Foreground suppression ) Average service life 0,000 h at T A = + C ) Limit values ) ust be within V S tolerances ) Without load 8) With resistive load 9) With light/dark ratio : 0) Do not bend below 0 C ) Reference voltage 0 V DC ) A=V S connections reverse-polarity B = Output short-circuit Scanning distance Sensor 0 (mm) Operating distance Scanning distance, max. typical Scanning range on white, 90 % remission Scanning range on grey, 8 % remission Scanning range on black, % remission Ø. mm Ø. mm Ø 0.8 mm Ø 0. mm % of scanning distance.. 0. WTB 90TL Short range 8%/90% 0 [mm] %/90% 90%/90% Order information * ) Type Order no. WTB 9OTL-P 0 WTB 9OTL-P 0 0 WTB 9OTL-N 0 9 WTB 9OTL-N * ) Equipment model with m PVC cable or 8 plug, -pin on request Distance [mm] SENSICK CATALOGUE 0

50 WLG 90T Photoelectric reflex switch, for transparent objects, standard applications, Teach-in, laser Scanning range m Photoelectric reflex switches Dimensional drawing Laser LED, visible red light, Class Sensitivity setting by Teach-in Precision auto-collimated optics Programmable output: light/dark switching Numeric display with menu prompts , Adjustments possible All types 8 8 Centre of optical axis ounting holes, Ø approx.. mm +/ button; select mode button Teach-in button Plug -pin, 8, 90 rotatable or cable m, -wire Status indicator LED, green: Laser on Status indicator LED, yellow: output active Numerical display Connection types WLG 90T-P WLG 90T-P 0 WLG 90T-N WLG 90T-N 0 CDRH Accession Number 0 Laser class See chapter Accessories Cables and connectors ounting systems Reflectors x 0.8 mm -pin, 8 gra *) *) L+ L+ ET ET *) Sensitivity control via External Teach (ET) PNP L+ NPN 0 SENSICK CATALOGUE

51 WLG 90T Technical data WLG 90T- P P 0 N N 0 Scanning range, max. typ. on reflector ) m/p 0 F, adjustable Sensitivity control Teach-in, External Teach (ET) Teach-in via button, menu guided Fine adjustment anually adjustable Light source ) Laser, red light; class mm at distance of m Supply voltage V S V DC ) Ripple ) ±0% Current consumption ) ax. 0 ma Switching outputs PNP NPN Output current I A max. < 00 ma Switching type Light-/dark-switching, programmable Response time ) 0.; ; ms, programmable Switching frequency max. ) 00; 00; 00/s, programmable Timer mode (dly) s, programmable Timer function Nor: normal ode Ond: On Delay ode, on delay OFd: Off Delay ode, off delay OnE: One Shot ode, one shot Numerical display monitoring Transmission, remission, threshold, distance, mode selection Connection types Cable -wire 8) Plug -pin, 8 VDE protection class 9) Circuit protection 0) A, B Enclosure rating IP Ambient temperature Operation C Storage C Weight With cable m approx. 00 g With plug approx. 0 g Housing material Housing: ABS; optic: PA ) Reflector P 0 F included with delivery ) Average service life 0,000 h at T A = + C ) Limit values ) ust be within V S tolerances ) Without load ) With resistive load ) With light/dark ratio : 8) Do not bend below 0 C 9) Reference voltage 0 V DC 0) A=V S connections reverse-polarity B = Output short-circuit Scanning range Order information *) WLG 90T standard Type WLG 9OT-P WLG 9OT-P 0 WLG 9OT-N WLG 9OT-N 0 Order no (m) Reflector type Operating range Operating range Scanning range, max. typical 0 * ) Equipment model with m PVC cable or 8 plug, -pin on request P 0 F m PL 0 F PL 0 F m m Ø mm Ø 8 mm Ø 0 mm Operating reserve Operating range Sensor [m] 0... Distance [m] SENSICK CATALOGUE 0

52 WLG 90T Photoelectric reflex switch, for transparent objects, increased requirements, Teach-in, laser Scanning range m Photoelectric reflex switches Dimensional drawing Laser LED, visible red light, Class Sensitivity setting by Teach-in Precision auto-collimated optics Programmable output: light/dark switching Numeric display with menu prompts , Adjustments possible All types 8 8 Centre of optical axis ounting holes, Ø approx.. mm +/ button; select mode button Teach-in button Plug -pin, 8, 90 rotatable or cable m, -wire Status indicator LED, green: Laser on Status indicator LED, yellow: output active Numerical display Connection types WLG 90T-P WLG 90T-P 0 WLG 90T-N WLG 90T-N 0 CDRH Accession Number 0 Laser class See chapter Accessories Cables and connectors ounting systems Reflectors x 0.8 mm -pin, 8 gra *) *) L+ L+ ET ET *) Sensitivity control via External Teach (ET) PNP L+ NPN 08 SENSICK CATALOGUE

53 WLG 90T Technical data WLG 90T- P P 0 N N 0 Scanning range, max. typ. on reflector ) m/pl 80 A, adjustable Scanning range, max. typ. on reflector ) m/p 0, adjustable Sensitivity control Teach-in, External Teach (ET) Teach-in via button, menu guided Fine adjustment anually adjustable Light source ) Laser, red light; class mm at distance of m Supply voltage V S V DC ) Ripple ) ±0% Current consumption ) ax. 0 ma Switching outputs PNP NPN Output current I A max. < 00 ma Switching type Light-/dark-switching, programmable Response time ) 0.; ; ms, programmable Switching frequency max. ) 00; 00; 00/s Timer mode (dly) s, programmable Timer function Nor: normal ode Ond: On Delay ode, on delay OFd: Off Delay ode, off delay OnE: One Shot ode, one shot Numerical display monitoring Transmission, remission, threshold, distance, mode selection Connection types Cable -wire 8) Plug -pin, 8 VDE protection class 9) Circuit protection 0) A, B Enclosure rating IP Ambient temperature Operation C Storage C Weight With cable m approx. 00 g With plug approx. 0 g Housing material Housing: ABS; optic: PA ) Reflector P 0 included with delivery ) Average service life 0,000 h at T A = + C ) Limit values ) ust be within V S tolerances ) Without load ) With resistive load ) With light/dark ratio : 8) Do not bend below 0 C 9) Reference voltage 0 V DC 0) A=V S connections reverse-polarity B = Output short-circuit Scanning range Order information *) WLG 90T high Type WLG 9OT-P WLG 9OT-P 0 WLG 9OT-N WLG 9OT-N 0 Order no (m) 0.. Reflector type Operating range Operating range Scanning range, max. typical 0 * ) Equipment model with m PVC cable or 8 plug, -pin on request PL 80 A P 0/PL 0 A/PL 0 A m m PL 0 A/PL A m Ø mm Ø 8 mm Ø 0 mm Operating reserve Operating range Sensor [m] 0... Distance [m] SENSICK CATALOGUE 09

54 Lichtschranken W L- Laser photoelectric Baureihe WL switches - Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W L-: Laser photoelectric switches -- long-sighted, certainly, and no need for extra safety precautions TThe W L- series offers a complete range of photoelectric switches using innovative laser technology, contained in a rugged metal housing. Pulsed lasers are used to transmit light. Because they have in protection class, the machine operator does not need to take any extra safety or protective measures when using the sensors. All the devices in this series are particularly long-sighted : the WS/WE L- through-beam photoelectric switch covers distances up to 80 m, while the WL L- reflex photoelectric switch can reach up to 8 m. Their integrated polarisation filter makes it possible to reliably detect shiny surfaces. The WT L- photoelectric proximity switch also covers a relatively long range: it is the right choice for scanning fixed distances of mm, or offers precise background suppression that can be adjusted between 0 and 00 mm. In addition to the scanning range, the small dimensions of the light spot generated on the object is a further advantage of laser technology. This makes it possible to detect even minute items of just 0. mm at maximum switching frequencies of,00/s. W L- laser photoelectric switches the best solution for millimetre precision, or even smaller! 00 SENSICK CATALOGUE

55 W L- Laser n The laser photoelectric proximity switch detects minimal differences in height, such as overlapping metal sheets, during continuous metal production processes. b oulded sheet-metal parts used for the production of automobiles are detected with millimetre accuracy by WL L- laser photoelectric switches so they can then be picked up and mounted with precision by a robot. n The W L- with laser technology detects the smallest electronic components with precision even at high switching frequencies. v Thanks to their small light spot, laser sensors such as the WT L- photoelectric proximity switch can also reliably detect the smallest objects such as packaging units in the pharmaceutical industry SENSICK CATALOGUE 0

56 WT L- Photoelectric proximity switches, background suppression, laser, red DC Scanning distance mm Photoelectric proximity switches Dimensional drawing 0 Laser class 90 rotatable plug Adjustable and fixed background suppression Adjustments possible WT L-B 0* WT L-B 0 WT L-B 0 WT L-B 0 LED operating indicator, green LED reception indicator, yellow Optical axis, receiver Optical axis, sender threaded mounting hole mm deep ounting hole l. mm Scanning distance control * (not for fixed scanning distances) CDRH Connection type WT L-B 0 WT L-B 0 WT L-B 0 WT L-B 0 See chapter Accessories ounting systems -pin, wht gra L+ P N L/D 0 SENSICK CATALOGUE

57 WT L- Technical data WT L- B0 B0 B0 B0 Scanning distance, adjustable mm, 8 % remission Focus mm Focus 80 mm Focus 00 mm Scanning range, fixed, % remission mm, focus mm Light source ) Laser 0 nm, pulsed focal point 0. mm 0. mm Supply voltage V S V DC ) Ripple ) V SS Current consumption ) ma Switching output N and P PNP, NPN Signal voltage HIGH V S < V, V S Signal voltage LOW ) 0V,. V Output current I A max. 00 ma Operating mode Light- or dark-switching ) Control input L/D 0 V or open, light-switching Control input L/D V S, dark-switching Response time max. ) Typ. 00 μs ax. switching frequency 8) 00/s Laser class (IEC 8-; EN 08-:9) VDE protection class 9) Enclosure rating Circuit protection 0) V IP, IP 9K A, B, C Ambient temperature T A Operation 0 C...+0 C Storage C...+ C Connection type plug, -pin Weight Approx. 0 g with plug ) Average service life 0,000 h at T A = + C ) Limit values ) ay not exceed or fall short of V S tolerances ) Without load ) At T A = + C and 00 ma output current ) Reversible via control input L/D ) Signal transit time with resistive load 8) At light/dark ratio : 9) Reference voltage 0 V DC 0) A = V S connections reverse-polarity B = Outputs against short-circuiting C = Interference pulse suppression Scanning distance and light spot size Focal point 0 mm 0 %/90% Order information Type WT L-B 0 WT L-B 0 WT L-B 0 WT L-B 0 Order no Light spot size Focal point 80 mm Focal point 00 mm 0 (mm) Scanning distance displacement (%) 8 8%/90% 8%/90% %/90% 0 (mm) Scanning distance on black, % remission Scanning distance on grey, 8 % remission Scanning distance on white, 90 % remission Scanning distance on black, % remission, fixed 0 (mm) SENSICK CATALOGUE 0

58 WL L- Photoelectric reflex switches, laser DC Scanning range 8 m Reflexions-Lichtschranke Dimensional drawing 0 Laser class Adjustable focus and sensitivity 90 rotatable plug Adjustments possible WL L-B 0 WL L-B 0 LED operating indicator, green LED reception indicator, yellow Centre of optical axis threaded mounting hole mm deep ounting hole l. mm Focal adjustment Sensitivity adjustment Focus + Sensitivity CDRH Connection type WL L-B 0 WL L-B 0 See chapter Accessories Cables and connectors ounting systems Reflectors -pin, wht gra L+ P N L/D 0 SENSICK CATALOGUE

59 WL L- Technical data WL L- B0 B0 Scanning range, max. typical/on reflector Light source ) in focal range 8 m/pl 80 A m/pl 80 A Laser 0 nm, pulsed min. 0.8 mm 00 mm to 0 mm to 0 mm Supply voltage V S V DC ) Ripple ) Current consumption ) Switching output N and P Signal voltage HIGH Signal voltage LOW ) Output current I A max. V SS ma PNP, NPN V S <.9 V, V S 0V,. V 00 ma Operating mode Light- or dark-switching ) Control input L/D Control input L/D Response time max. ) 0 V or open, light-switching V S, dark-switching Typ. 00 μs ax. switching frequency 8) 00/s Laser class (IEC 8-; EN 08-:9) VDE protection class 9) Enclosure rating Circuit protection 0) V IP, IP 9K A, B, C Ambient temperature T A Operation 0 C...+0 C Connection type Weight Storage C...+ C plug, -pin Approx. 0 g with plug ) Average service life 0,000 h at T A = + C ) Limit values ) ay not exceed or fall short of V S tolerances ) Without load ) At T A = + C and 00 ma output current ) Reversible via control input L/D ) Signal transit time with resistive load 8) At light/dark ratio : 9) Reference voltage 0 V DC 0) A=V S connections reverse-polarity B = Outputs against short-circuiting C = Interference pulse suppression Scanning range and operating reserve WL L- B0 000 WL L- B (m) 0 0 Reflector type PL 80 A PL 0 A PL 0 A P 0 PL 0 A PL 0 A Reflective tape «Diamond Grade» Operating range m m m m m m m Operating reserve 00 0 Operating range scanning range, max. typical (m) 0 0 Operating range Scanning range, max. typical WL L- B0 000 WL L- B0 0 0 Reflector type 0 9 PL 80 A PL 0 A 0 9 PL 0 A 0 9 P PL 0 A 0. PL 0 A 0 Reflective tape 0 (m) 0 0 «Diamond Grade» Operating range Scanning range, max. typical Operating range m m m m m m m Operating reserve 00 0 Operating range Scanning range, max. typical (m) 0 0 Order information Type Order no. WL L-B 0 08 WL L-B SENSICK CATALOGUE 0

60 WS/WE L- Through-beam photoelectric switches, laser DC Scanning range 80 m Through-beam photoelectric switches Dimensional drawing 0 Laser class Adjustable focus and sensitivity 90 rotatable plug Adjustments possible WS/WE L-P0 WS/WE L-P0 WS/WE L-N0 WS/WE L-N0 Sender WS Receiver WE LED operating indicator (WS above only) LED reception indicator (WE) Centre of optical axis threaded mounting hole mm deep ounting drill hole l. mm Focal adjustment (WS) Sensitivity adjustment (WE) Focus + Sensitivity CDRH Connection type WS/WE L-P0 WS/WE L-N0 WS/WE L-P0 WS/WE L-N0 -pin, See chapter Accessories Cables and connectors ounting systems Sender L+ Test Receiver wht L+ 0 SENSICK CATALOGUE

61 WS/WE L- Technical data WS/WE L- P0 N0 P0 N0 Scanning range, max. typical Recommended operating range Focus adjustable Light source ) 80 m 0 m 80 m 0 m 00 mm... Fixed parallel light beam Laser 0 nm, pulsed 0 mm at 0 m.0 mm at m Supply voltage V S VDC ) Ripple ) Current consumption ) Switching outputs and Signal voltage HIGH Signal voltage LOW ) Output current I A max. Response time max. ) V SS WS ma, WE ma PNP NPN V S <.9 V, V S Approx. 0 V,. V 00 ma Typ. 00 μs ax. switching frequency ) 00/s Input TE system test VDE protection class 8) V S or open: sender active 0 V: sender inactive Laser class (IEC 8-; EN 08-:9) Enclosure rating Circuit protection 9) V IP, IP 9K A, B, C Ambient temperature T A Operation 0 C...+0 C Connection type Weight (WS + WE) Storage C...+ C plug, -pin Approx. 0 g ) Average service life 0,000 h at T A = + C ) Limit values ) ay not exceed or fall short of V S tolerances ) Without load ) At T A = + C and 00 ma output current ) Signal transit time with resistive load ) At light/dark ratio : 8) Reference voltage 0 V DC 9) A=V S connections reverse-polarity B = Outputs against short-circuiting C = Interference pulse suppression Scanning range (m) Operating range/scanning range, max. typical Order information Type WS/WE L-P0 WS/WE L-N0 0 0 WS/WE L-P0 WS/WE L-N0 0 (m).. 0 Operating range/scanning range, max. typical Order no WS/WE L- P/N WS/WE L- P/N Operating range Scanning range, max. typical Operating reserve 00 0 (m) Operating range 00 Operating range Scanning range, max. typical 0 (m),, SENSICK CATALOGUE 0

62 V 8 Laser Photoelectric switches Photoelectric proximity switches Photoelectric reflex switches Through-beam photoelectric switches V 8 Laser No frills performance: long ranges, high speeds with precision Laser class (IEC 08-) TThe photoelectric switch series V 8 L utilising the latest technology laser diodes, allies many years of sensor and applications knowhow, with customer oriented features. The strengths of our V 8 Laser: Laser class (IEC 08-), extremely long ranges, smallest, visible light spots, very short response times. The V 8 L and its ranges in overview: VSE 8 L through-beam photoelectric switches: 0 m; VL 8 L photoelectric reflex switches: m (P 0 F), polarizing filter; VTE 8 L photoelectric proximity switches: energetic type, scr. 00 mm (90 % remission). Additional standard features: very short response time f = 800/s (,000/s); manual sensitivity adjustment (VSE 8 L), or Teach-in (VL 8 L and VTE 8 L). The Teachin provides easy handling and additional flexibility. Select: substantial operating reserve for standard applications, precise switching point and small hysteresis for special tasks. High flexibilty and functionality is available from a small number of variants as a result of: programmable switching type L.ON or D.ON by control line. V S = V DC; switching output either in PNP or NPN; plug connector, IP and sturdy metal housing (straight or 90 degree body styles)... Yellow and green LED indicators provide support during installation, operation startup, alignment and maintenance. Whilst the V 8 L is suitable for any general purpose application, it will be of particular interest for applications in mechanical handling and logistics engineering, special mechanical engineering tasks, the packaging industry and conveyor engineering. 08 SENSICK CATALOGUE

63 V 8 L m The photoelectric reflex switch VL 8 L checks the presence of cork stoppers. n The photoelectric proximity switch VTE 8 L detects marks and ensures precise positioning of circuit boards. m The VTE 8 L detects thin wires on resistors prior to insertion SENSICK CATALOGUE 09

64 VTE 8 L Photoelectric proximity switches, energetic, Teach-in Scanning distance mm... 0 mm Photoelectric proximity switches Detects small parts and switches precisely thank to small laser spot Laser class Adjustable sensitivity Dimensional drawing x x x x Adjustments possible VTE 8 L-P VTE 8 L-P VTE 8 L-N VTE 8 L-N Plug, -pin Sensitivity adjustment (Teach-in button) Green LED indicator: V S supply voltage feed Yellow LED indicator: lights continuously: reception signal > reserve factor blinks: Reception signal < reserve factor but > switching threshold ounting nuts (x), SW, metal (included with delivery) Connection types VTE 8 L-P VTE 8 L-N VTE 8 L-P VTE 8 L-N Laser class (IEC 08-) -pin, See chapter Accessories Cables and connectors ounting systems wht L+ C * Control input C, programming: Switching type L.ON/D.ON and External Teach-in C = open (not assigned) light-switching L.ON C = + V S : dark-switching D.ON C = 0 V: sensitivity setting per external Teach-in active 00 SENSICK CATALOGUE

65 VTE 8 L Technical data VTE 8 L- P P N N Scanning distance, max. typical ) mm... 0 mm Operating distance ) mm mm inimum object diameter ) = Approx. 0. mm in 00 mm (= Focus) Approx..0 mm in 00 mm Approx. 8.0 mm in 00 mm (only axial) Angle of dispersion of sender Focused, focus at 00 mm Light source ), Light type Red laser LED, 0 nm Laser class Laser class (IEC 08-) Laser sender output capacity ax. 0. mw Housing Axial optics Radial optics Sensitivity setting anual, per Teach-in button Electronic, per control input C (0 V) ) Status indicators Yellow LED: switching output active, reserve LED green: supply voltage V S = ON Supply voltage V S V DC ) Ripple ) 0 % Current consumption ) 0 ma Switching outputs : PNP : NPN Output current I A max. 00 ma Switching mode Light-/Dark-switching selectable ) Response time ) 0. ms Switching frequency max. 8) 800/s Connection types Plug, -pin VDE protection class 9) V Enclosure rating IP Circuit protection 0) A, B, C, D Ambient temperature Operation C... + C Storage C C Weight with plug Approx. 0 g Housing material Housing: Nickel-coated brass/pc Optics: PC with protective glass pane ) Object to be detected with 90 % emission (to standard white in acc. with DIN 0); 00 x 00 mm ) Average service life 00,000 h at T A = + C ) Controll input C L.ON/D.ON and external Teach-in C = open: light-switching L.ON C = + V S : dark-switching D.ON C = 0 V: Sensitivity setting per external Teach-in ) Limit values ) ay not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load 8) With light/dark ratio : 9) Reference voltage 0 V 0) A=V S connections reverse-polarity B = Inputs and outputs reverse-polarity C = Interference pulse suppression D = Outputs overload and short-circuit VTE 8 L operating diagrams VTE 8 L axial / (mm) /90 0/ VTE 8 L radial 0 / 00 0 Smallest detectable object (diameter in mm) (mm) VTE 8-Laser B A Scanning distance Operating reserve % 90% 8% VTE 8-Laser axial Scanning distance max.typical Operating distance (mm) Scanning distance Operating reserve % % 90% VTE 8-Laser radial Scanning distance max.typical Operating distance (mm) Scanning distance 0 (mm) Operating distance Scanning distance, max. typ. Scanning distance on black, % remission Scanning distance on grey, 8 % remission Scanning distance on white, 90 % remission A B Axial optics Radial optics Order information Type Order no. VTE 8 L-P 0 8 VTE 8 L-N 0 0 VTE 8 L-P 0 VTE 8 L-N SENSICK CATALOGUE 0

66 VL 8 L Photoelectric reflex switches, red laser light, polarization filter Scanning range m (P 0F) Photoelectric reflex switches Longest ranges Detects small parts and switches precisely thank to small laser spot Laser class A polarisation filter ensures reliable switching even with shiny objects Dimensional drawing x x x 8x Adjustments possible VL 8 L-P VL 8 L-P VL 8 L-N VL 8 L-N Plug, -pin Sensitivity adjustment (Teach-in button) Green LED indicator: V S supply voltage feed Yellow LED indicator: lights continuously: reception signal > reserve factor blinks: Reception signal < reserve factor but > switching threshold ounting nuts (x), SW, metal (included with delivery) Connection types VL 8 L-P VL 8 L-N VL 8 L-P VL 8 L-N Laser class (IEC 08-) -pin, See chapter Accessories Cables and connectors ounting systems Reflectors wht L+ C * Control input C, programming: Switching type L.ON/D.ON and External Teach-in C = open (not assigned) dark-switching D.ON C = + V S : light-switching L.ON C = 0 V: sensitivity setting per external Teach-in active 0 SENSICK CATALOGUE

67 VL 8 L Technical data VL 8 L- P P N N Scanning range, max. typical/reflector 0. m... m/p 0 F Operating range ) Smallest detectable object ) Angle of dispersion of sender Light source ), Light type 0. m... 0 m/p 0 F Approx. 0. mm Ø at m Approx. mm Ø at m Approx. 9 mm at m Approx. 0.0 (SR = max.) Approx. 0.0 (SR = / max.) Red laser light, 0 nm Laser class Laser class (IEC 08-) Laser sender output capacity Housing Sensitivity setting Status indicators ax. 0. mw Axial optics Radial optics anual, per Teach-in button Electronic, per control input C (0 V) ) Yellow LED: Switching output active, reserve Supply voltage V S V DC ) Ripple ) 0 % Current consumption ) Switching outputs Output current I A max. LED green: supply voltage V S = ON 0 ma : PNP : NPN 00 ma Switching mode Light-/Dark-switching selectable ) Response time ) 0. ms Switching frequency max. 8) 800/s Connection types Plug, -pin VDE protection class 9) V Enclosure rating IP Circuit protection 0) A, B, C, D Ambient temperature Operation C... + C Weight with plug Approx. 0 g Housing material ) Suitable reflectors for laser photoelectric reflex switches: We recommend our F reflectors with micro triple structure or DG reflector tape for short distances up to m and our standard reflectors for ranges > m (also see the accessories; reflectors for VL 8 L) Operating range and operating reserve Storage C C Housing: Nickel-coated brass/pc Optics: PC with protective glass pane ) Average service life 00,000 h at T A = + C ) Controll input C L.ON/D.ON and external Teach-in C = open: dark-switching D.ON C = + V S : light-switching L.ON C = 0 V: Sensitivity setting per external Teach-in ) Limit values ) ay not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load 8) With light/dark ratio : 9) Reference voltage 0 V 0) A=V S connections reverse-polarity B = Inputs and outputs reverse-polarity C = Interference pulse suppression D = Outputs overload and short-circuit 0. 0 VL 8-Laser 000 VL 8-Laser (m) Operating range ax. typical scanning range Smallest detectable object (diameter in mm) (m) 0 VL 8-Laser Scanning range (m) Scanning range Operating reserve 00 0 Operating range max. typ. Scanning range Reflector type Operating range P 0 F 0. 0 m PL 0 F PL 80 A/P 0 0. m 0. m C m PL 0 F 0. m Reflective tape Diamond Grade 0. m (mm) (m) Scanning range Order information Type Order no. VL 8 L-P 0 0 VL 8 L-N 0 VL 8 L-P 0 VL 8 L-N SENSICK CATALOGUE 0

68 VS/VE 8 L Through-beam photoelectric switches, laser red light Scanning range m Through-beam photoelectric switches Longest ranges Detects small parts and switches precisely thanks to small laser spot Laser class Optionally (integrated) horizontal and radial optic axes Dimensional drawing x x x 8x Adjustments possible VE 8 L-P VE 8 L-P VE 8 L-N VE 8 L-N Plug, -pin Sensitivity adjustment, trimmer 0 (only receiver VE 8 L) Green LED indicator: V S supply voltage feed Yellow LED indicator (only receiver VE 8 L), lights continuously: reception signal > reserve factor blinks: Reception signal < reserve factor but > switching threshold Yellow LED indicator (only sender VS 8 L), lights continuously: Sender active does not light: Sender off ounting nuts (x), SW, metal (included with delivery) Connection types VS 8 L-0D VS 8 L-0D VE 8 L-P VE 8 L-N VE 8 L-P VE 8 L-N See chapter Accessories Cables and connectors ounting systems Laser class (IEC 08-) Sender VS -pin, wht L+ NC TE Receiver VE -pin, wht L+ L/D 0 SENSICK CATALOGUE