MC1458, MC1558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS
|
|
- Domenic Crawford
- 5 years ago
- Views:
Transcription
1 Short-Circuit Protection Wide Common-Mode and Differential oltage Ranges No Frequency Compensation Required Low Power Consumption No Latch-Up Designed to Be Interchangeable With Motorola MC/MC and Signetics S/N MC...D OR P PACKAGE MC... JG PACKAGE (TOP IEW) OUT IN IN+ CC 2 CC + MC...U PACKAGE (TOP IEW) description The MC and MC are dual generalpurpose operational amplifiers with each half electrically similar to the µa except that offset null capability is not provided. The high-common-mode input voltage range and the absence of latch-up make these amplifiers ideal for voltage-follower applications. The devices are short-circuit protected and the internal frequency compensation ensures stability without external components. The MC is characterized for operation from 0 C to 0 C. The MC is characterized for operation over the full military temperature range of C to 2 C. symbol (each amplifier) IN + IN + OUT IN IN+ OUT IN IN+ CC CC + MC... FK PACKAGE (TOP IEW) CC OUT CC + No internal connection AAILABLE OPTIONS PACKAGE TA IOmax SMALL CHIP CERAMIC PLASTIC CERAMIC AT 2 C OUTLINE CARRIER DIP DIP FLAT PACK (D) (FK) (JG) (P) (U) 0 C to 0 C m MCCD MCCP C to 2 C m MCMFK MCMSG MCMU The D packages are available taped and reeled. Add the suffix R to the device type (i.e., MCDR) PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright 990, Texas Instruments Incorporated On products compliant to MIL-PRF-, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. POST OFFICE BOX 0 DALLAS, TEXAS 2
2 schematic (each amplifier) CC + IN IN + OUT CC absolute maximum ratings over operating free-air temperature range (unless otherwise noted) MC MC Supply voltage CC + (see Note ) 22 Supply voltage CC (see Note ) 22 Differential input voltage (see Note 2) ±0 ±0 Input voltage at either input (see Notes and ) ± ± Duration of output short circuit (see Note ) unlimited unlimited Continuous total dissipation See Dissipation Rating Table Operating free-air temperature range 0 to 0 to 2 C Storage temperature range to 0 to 0 C Case temperature for 0 seconds: FK package 20 C Lead temperature, mm (/ inch) from case for 0 seconds JG or U package 00 C Lead temperature, mm (/ inch) from case for 0 seconds D or P package 20 C NOTES:. All voltage values, unless otherwise noted, are with respect to the midpoint between CC + and CC. 2. Differential voltages are at IN+ with respect to IN.. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or, whichever is less.. The output can be shorted to ground or either power supply. For the MC only, the unlimited duration of the short circuit applies at (or below) 2 C case temperature or 0 C free-air temperature. PACKAGE TA 2 C DISSIPATION RATING TABLE DERATING FACTOR DERATE ABOE TA TA = 0 C TA = 2 C D 0 mw. mw/ C C mw FK 0 mw.0 mw/ C C 0 mw 2 mw JG 0 mw. mw/ C 9 C 2 mw 20 mw P 0 mw.0 mw/ C C 0 mw U mw. mw/ C 2 C 2 mw mw 2 POST OFFICE BOX 0 DALLAS, TEXAS 2
3 recommended operating conditions MIN NOM MAX Supply voltage, CC± ± ± electrical characteristics at specified free-air temperature, CC± = ± TEST CONDITIONS MC MC IO Input offset voltage O =0 2 C Full range. IIO Input offset current O = 0 2 C Full range C IIB Input bias current O = 0 Full range Common-mode input 2 C ±2 ± ±2 ± ICR voltage range Full range ±2 ±2 RL = 0 kω 2 C ±2 ± ±2 ± Maximum peak output RL 0 kω Full range ±2 ±2 OM voltage swing RL = 2 kω 2 C ±0 ± ± 0 ± m na na AD BOM RL 2 kω Full range ±0 ±0 Large-signal g differential RL 2 kω,, 2 C voltage amplification O = ±0 Full range 2 Maximum-output-swing bandwidth (closed loop) RL = 2 kω, O ±0, AD =, THD % /m 2 C khz B Unity-gain bandwidth 2 C MHz φm Phase margin AD = 2 C C Gain margin 2 C db ri Input resistance 2 C 0.* 2 0.* 2 MΩ ro Output resistance O = 0, See Note 2 C Ω Ci Input capacitance 2 C.. pf zic CMRR kss n Common-mode input impedance f = 20 Hz 2 C MΩ Common-mode rejection IC = ICR min, 2 C ratio O = 0 Full range 0 0 Supply voltage sensitivity CC = ± 9 to ±, 2 C ( IO/ CC) O = 0 Full range 0 0 Equivalent input noise voltage (closed loop) AD = 00, f = khz, RS = 0, BW = Hz db µ/ 2 C n/ Hz *This parameter is not production tested. All characteristics are specified under open-loop operating conditions with zero common-mode input voltage unless otherwise specified. Full range for MC is 0 C to 0 C and for MC is C to 2 C. NOTE : This typical value applies only at frequencies above a few hundred hertz because of the effect of drift and thermal feedback. POST OFFICE BOX 0 DALLAS, TEXAS 2
4 electrical characteristics at specified free-air temperature, CC± = ± (continued) TEST CONDITIONS MC MC IOS Short-circuit output current 2 C ±2 ±0 ±2 ±0 ma ICC Supply current (both amplifiers) O =0 0, No load PD Total power dissipation (both amplifiers) O =0 0, No load 2 C... Full range.. 2 C Full range O/O2 Crosstalk attenuation 2 C db All characteristics are specified under open-loop operating conditions with zero common-mode input voltage unless otherwise specified. Full range for MC is 0 C to 0 C and for MC is C to 2 C. operating characteristics, CC± = ±, T A = 2 C TEST CONDITIONS MC MC tr Rise time I = 20 m, RL = 2 kω, µs Overshoot factor CL = 00 pf, See Figure % % I = 0, SR Slew rate at unity gain CL = 00 pf, RL = 2 kω, See Figure ma mw /µs MEASUREMENT INFORMATION I Input + Output Input oltage Waveform 0 CL = 00 pf RL = 2 kω Test Circuit Figure. Rise Time, Overshoot, and Slew Rate Waveform and Test Circuit POST OFFICE BOX 0 DALLAS, TEXAS 2
5 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INOLE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEERE PROPERTY OR ENIRONMENTAL DAMAGE ( CRITICAL APPLICATIONS ). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. ILUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER S RISK. In order to minimize risks associated with the customer s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI s publication of information regarding any third party s products or services does not constitute TI s approval, warranty or endorsement thereof. Copyright 99, Texas Instruments Incorporated
MC1458, MC1558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS
Short-Circuit Protection Wide Common-Mode and Differential oltage Ranges No Frequency Compensation Required Low Power Consumption No Latch-Up Designed to Be Interchangeable With Motorola MC1/MC1 and Signetics
More informationRC4136, RM4136, RV4136 QUAD GENERAL-PURPOSE OPERATIONAL AMPLIFIERS
Continuous-Short-Circuit Protection Wide Common-Mode and Differential Voltage Ranges No Frequency Compensation Required Low Power Consumption No Latch-Up Unity Gain Bandwidth... MHz Typ Gain and Phase
More informationua747c, ua747m DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS
No Frequency Compensation Required Low Power Consumption Short-Circuit Protection Offset-Voltage Null Capability Wide Common-Mode and Differential Voltage Ranges No Latch-Up Designed to Be Interchangeable
More informationRC4558, RC4558Y, RM4558, RV4558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS
Continuous-Short-Circuit Protection Wide Common-Mode and Differential Voltage Ranges No Frequency Compensation Required Low Power Consumption No Latch-Up Unity Gain Bandwidth...3 MHz Typ Gain and Phase
More informationGENERAL-PURPOSE OPERATIONAL AMPLIFIERS
Short-Circuit Protection Offset-Voltage Null Capability Large Common-Mode and Differential Voltage Ranges No Frequency Compensation Required Low Power Consumption No Latch-Up Designed to Be Interchangeable
More informationLM101A, LM201A, LM301A HIGH-PERFORMANCE OPERATIONAL AMPLIFIERS
HIGH-PERFORMAE OPERATIONAL AMPLIFIERS D9, OCTOBER 99 REVISED SEPTEMBER 99 Low Input Currents Low Input Offset Parameters Frequency and Transient Response Characteristics Adjustable Short-Circuit Protection
More informationNE5532, NE5532A DUAL LOW-NOISE OPERATIONAL AMPLIFIERS
Equivalent Input Noise Voltage 5 nv/ Hz Typ at 1 khz Unity-Gain Bandwidth... 10 MHz Typ Common-Mode Rejection Ratio... 100 db Typ High dc Voltage Gain... 100 V/mV Typ Peak-to-Peak Output Voltage Swing
More informationLM148, LM248, LM348 QUADRUPLE OPERATIONAL AMPLIFIERS
µa741 Operating Characteristics Low Supply Current Drain...0.6 ma Typ (per amplifier) Low Input Offset Voltage Low Input Offset Current Class AB Output Stage Input/Output Overload Protection Designed to
More informationGENERAL-PURPOSE OPERATIONAL AMPLIFIERS
查询 UA71 供应商 捷多邦, 专业 PCB 打样工厂, 小时加急出货 µa71, µa71y Short-Circuit Protection Offset-Voltage Null Capability Large Common-Mode and Differential Voltage Ranges No Frequency Compensation Required Low Power Consumption
More informationLM101A, LM201A, LM301A HIGH-PERFORMANCE OPERATIONAL AMPLIFIERS
HIGH-PERFORMAE OPERATIONAL AMPLIFIERS D9, OCTOBER 979 REVISED SEPTEMBER 990 Low Input Currents Low Input Offset Parameters Frequency and Transient Response Characteristics Adjustable Short-Circuit Protection
More informationTL070 JFET-INPUT OPERATIONAL AMPLIFIER
Low Power Consumption Wide Common-Mode and Differential Voltage Ranges Low Input Bias and Offset Currents Output Short-Circuit Protection Low Total Harmonic Distortion.3% Typ Low Noise V n = 8 nv/ Hz Typ
More informationAVAILABLE OPTIONS CERAMIC DIP (J) 6 mv ua747cd ua747cn. 5 mv ua747mj ua747mw ua747mfk
SLOS9A D97, FEBRUARY 97 REVISED OCTOBER 99 No Frequency Compensation Required Low Power Consumption Short-Circuit Protection Offset-Voltage Null Capability Wide Common-Mode and Differential Voltage Ranges
More informationua733c, ua733m DIFFERENTIAL VIDEO AMPLIFIERS
-MHz Bandwidth -kω Input Resistance Selectable Nominal Amplification of,, or No Frequency Compensation Required Designed to be Interchangeable With Fairchild ua7c and ua7m description The ua7 is a monolithic
More informationLM158, LM158A, LM258, LM258A LM358, LM358A, LM2904, LM2904Q DUAL OPERATIONAL AMPLIFIERS
Wide Range of Supply oltages: Single Supply...3 to 30 (LM2904 and LM2904Q...3 to 26 ) or Dual Supplies Low Supply-Current Drain Independent of Supply oltage... 0.7 Typ Common-Mode Input oltage Range Includes
More informationTL598 PULSE-WIDTH-MODULATION CONTROL CIRCUITS
Complete PWM Power Control Function Totem-Pole Outputs for 200-mA Sink or Source Current Output Control Selects Parallel or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either Output
More informationLM124, LM124A, LM224, LM224A LM324, LM324A, LM2902 QUADRUPLE OPERATIONAL AMPLIFIERS
Wide Range of Supply Voltages: Single Supply...3 V to 30 V (LM2902 3 V to 26 V) or Dual Supplies Low Supply Drain Independent of Supply Voltage... 0.8 Typ Common-Mode Input Voltage Range Includes Ground
More informationUC284x, UC384x, UC384xY CURRENT-MODE PWM CONTROLLERS
Optimized for Off-Line and dc-to-dc Converters Low Start-Up Current (
More informationAVAILABLE OPTIONS CERAMIC DIP (J) CERAMIC DIP (JG) TL071CPWLE 6 mv TL071ACD TL071ACP 3 mv TL071BCD TL071BCP TL072CP
Low Power Consumption Wide Common-Mode and Differential Voltage Ranges Low Input Bias and Offset Currents Output Short-Circuit Protection Low Total Harmonic Distortion.3% Typ TL7, TL7A, TL7B, TL72 Low
More informationTLE2141, TLE2141A, TLE2141Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
Low Noise 1 Hz...15 n/ Hz 1 khz...1.5 n/ Hz 1 -pf Load Capability 2-mA Min Short-Circuit Output Current 27-/µs Min Slew Rate High Gain-Bandwidth Product...5.9 MHz Low IO... 5 µ Max at 25 C Single or Split
More informationLM139, LM139A, LM239, LM239A, LM339, LM339A, LM339Y, LM2901 QUAD DIFFERENTIAL COMPARATORS
Single Supply or Dual Supplies Wide Range of Supply Voltage...2 V to 36 V Low Supply-Current Drain Independent of Supply Voltage... 0.8 ma Typ Low Input Bias Current... 25 Typ Low Input Offset Current...3
More informationGENERAL-PURPOSE OPERATIONAL AMPLIFIERS
Short-Circuit Protection Offset-Voltage Null Capability Large Common-Mode and Differential Voltage Ranges No Frequency Compensation Required Low Power Consumption No Latch-Up Designed to Be Interchangeable
More information15 DEVICES COVER COMMERCIAL, INDUSTRIAL, AND MILITARY TEMPERATURE RANGES AVAILABLE OPTIONS CERAMIC DIP (J) CERAMIC DIP (JG)
TL7, TL7A, TL7B, TL72 SLOS8D SEPTERMBER 978 REVISED AUGUST 996 Low Power Consumption Wide Common-Mode and Differential Voltage Ranges Low Input Bias and Offset Currents Output Short-Circuit Protection
More information54ACT11020, 74ACT11020 DUAL 4-INPUT POSITIVE-NAND GATES
Inputs Are TTL-Voltage Compatible Flow-Through Architecture to Optimize PCB Layout Center-Pin V CC and GND Configurations to Minimize High-Speed Switching Noise EPIC (Enhanced-Performance Implanted CMOS)
More informationSN54ACT00, SN74ACT00 QUADRUPLE 2-INPUT POSITIVE-NAND GATES
SCAS AUGUST 99 REVISED MAY 99 Inputs Are TTL-Voltage Compatible EPIC (Enhanced-Performance Implanted CMOS) -µm Process Package Options Include Plastic Small-Outline (D), Shrink Small-Outline (DB), Thin
More informationSN75158 DUAL DIFFERENTIAL LINE DRIVER
SN78 Meets or Exceeds the Requirements of ANSI EIA/TIA--B and ITU Recommendation V. Single -V Supply Balanced-Line Operation TTL Compatible High Output Impedance in Power-Off Condition High-Current Active-Pullup
More informationSN55451B, SN55452B, SN55453B, SN55454B SN75451B, SN75452B, SN75453B, SN75454B DUAL PERIPHERAL DRIVERS
PERIPHERAL DRIVERS FOR HIGH-CURRENT SWITCHING AT VERY HIGH SPEEDS Characterized for Use to 00 ma High-Voltage Outputs No Output Latch-Up at 0 V (After Conducting 00 ma) High-Speed Switching Circuit Flexibility
More informationSN54HC00, SN74HC00 QUADRUPLE 2-INPUT POSITIVE-NAND GATES
Package Options Include Plastic Small-Outline (D), Thin Shrink Small-Outline (PW), and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description
More informationTLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B TLC25L2Y, TLC25M2, TLC25M2A, TLC25M2B, TLC25M2Y LinCMOS DUAL OPERATIONAL AMPLIFIERS
A-Suffix ersions Offer 5-m IO TLC252, TLC252A, TLC252B, TLC252Y, TLC25L2, TLC25L2A, TLC25L2B B-Suffix ersions Offer 2-m IO Wide Range of Supply oltages 1.4 16 True Single-Supply Operation Common-Mode Input
More informationTL494M PULSE-WIDTH-MODULATION CONTROL CIRCUIT
Complete PWM Power Control Circuitry Uncommitted Outputs for 00-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
More informationTLE214x, TLE214xA, TLE214xY EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
Low Noise 10 Hz... 15 n/ Hz 1 khz... 10.5 n/ Hz 10 000-pF Load Capability 20-mA Min Short-Circuit Output Current 27-/µs Min Slew Rate High Gain-Bandwidth Product... 5.9 MHz Low IO... 500 µ Max at 25 C
More informationTL594 PULSE-WIDTH-MODULATION CONTROL CIRCUITS
Complete PWM Power Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
More informationMC3487 QUADRUPLE DIFFERENTIAL LINE DRIVER
Meets or Exceeds Requirements of ANSI EIA/TIA-422-B and ITU Recommendation V. -State, TTL-Compatible s Fast Transition Times High-Impedance Inputs Single -V Supply Power-Up and Power-Down Protection Designed
More informationSN54HC365, SN74HC365 HEX BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
High-Current -State s Drive Bus Lines, Buffer Memory Address Registers, or Drive up to LSTTL Loads True s Package Options Include Plastic Small-Outline (D) and Ceramic Flat (W) Packages, Ceramic Chip Carriers
More informationSN54HC175, SN74HC175 QUADRUPLE D-TYPE FLIP-FLOPS WITH CLEAR
Contain Four Flip-Flops With Double-Rail Outputs Applications Include: Buffer/Storage Registers Shift Registers Pattern Generators Package Options Include Plastic Small-Outline (D), Thin Shrink Small-Outline
More informationSN54HC132, SN74HC132 QUADRUPLE POSITIVE-NAND GATES WITH SCHMITT-TRIGGER INPUTS
Operation From Very Slow Input Transitions Temperature-Compensated Threshold Levels High Noise Immunity Same Pinouts as HC00 Package Options Include Plastic Small-Outline (D), Shrink Small-Outline (DB),
More informationTL494C, TL494I, TL494M, TL494Y PULSE-WIDTH-MODULATION CONTROL CIRCUITS
Complete PWM Power Control Circuitry Uncommitted Outputs for 00-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
More informationSN54HC245, SN74HC245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
High-Current -State s Drive Bus Lines Directly or up to LSTTL Loads Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline (DB), Thin Shrink Small-Outline (PW), and Ceramic Flat (W) Packages,
More informationSN54HC377, SN74HC377 OCTAL D-TYPE FLIP-FLOPS WITH CLOCK ENABLE
Eight Flip-Flops With Single-Rail Outputs Clock Enable Latched to Avoid False Clocking Applications Include: Buffer/Storage Registers Shift Registers Pattern Generators Package Options Include Plastic
More informationTL1431 PRECISION PROGRAMMABLE REFERENCE
PRECISION PROGRAMMABLE REFEREE 0.4% Initial Voltage Tolerance 0.2-Ω Typical Output Impedance Fast Turnon... 500 ns Sink Current Capability...1 ma to 100 ma Low Reference Current (REF) Adjustable Output
More informationAVAILABLE OPTIONS CERAMIC DIP (J) CERAMIC DIP (JG) TL071CPWLE 6 mv TL071ACD TL071ACP 3 mv TL071BCD TL071BCP TL072CP
Low Power Consumption Wide Common-Mode and Differential Voltage Ranges Low Input Bias and Offset Currents Output Short-Circuit Protection Low Total Harmonic Distortion.3% Typ TL7, TL7A, TL7B, TL72 Low
More informationSN54HC373, SN74HC373 OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS
Eight High-Current Latches in a Single Package High-Current -State True s Can Drive up to LSTTL Loads Full Parallel Access for Loading Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline
More informationLM139, LM139A, LM239, LM239A, LM339 LM339A, LM339Y, LM2901, LM2901Q QUAD DIFFERENTIAL COMPARATORS SLCS006C OCTOBER 1979 REVISED NOVEMBER 1996
Single Supply or Dual Supplies Wide Range of Supply Voltage 2 V to 36 V Low Supply-Current Drain Independent of Supply Voltage... 0.8 ma Typ Low Input Bias Current...25 na Typ Low Input Offset Current...3
More informationIMPORTANT NOTICE Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to obtain the
More informationTL594C, TL594I, TL594Y PULSE-WIDTH-MODULATION CONTROL CIRCUITS
Complete PWM Power Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
More informationTHS MHz HIGH-SPEED AMPLIFIER
THS41 27-MHz HIGH-SPEED AMPLIFIER Very High Speed 27 MHz Bandwidth (Gain = 1, 3 db) 4 V/µsec Slew Rate 4-ns Settling Time (.1%) High Output Drive, I O = 1 ma Excellent Video Performance 6 MHz Bandwidth
More informationSN54ALS08, SN54AS08, SN74ALS08, SN74AS08 QUADRUPLE 2-INPUT POSITIVE-AND GATES
SNALS0, SNAS0, SN7ALS0, SN7AS0 Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description These devices contain
More informationSN75174 QUADRUPLE DIFFERENTIAL LINE DRIVER
SN Meets or Exceeds the Requirements of ANSI Standards EIA/TIA--B and RS-8 and ITU Recommendation V.. Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments -State s Common-Mode Voltage
More informationTL750M, TL751M SERIES LOW-DROPOUT VOLTAGE REGULATORS
ery Low Dropout oltage, Less Than.6 at 75 ma Low Quiescent Current TTL- and CMOS-Compatible Enable on TL751M Series 6- Load-Dump Protection Overvoltage Protection Internal Thermal Overload Protection Internal
More informationPRODUCT PREVIEW SN54AHCT257, SN74AHCT257 QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS WITH 3-STATE OUTPUTS. description
Inputs Are TTL-Voltage Compatible EPIC (Enhanced-Performance Implanted CMOS) Process Package Options Include Plastic Small-Outline (D), Shrink Small-Outline (DB), Thin Very Small-Outline (DGV), Thin Shrink
More informationua9637ac DUAL DIFFERENTIAL LINE RECEIVER
ua967ac Meets or Exceeds the Requirements of ANSI Standards EIA/TIA--B and EIA/TIA--B and ITU Recommendations V. and V. Operates From Single -V Power Supply Wide Common-Mode Voltage Range High Input Impedance
More informationSN54AHCT132, SN74AHCT132 QUADRUPLE POSITIVE-NAND GATES WITH SCHMITT-TRIGGER INPUTS
Inputs Are TTL-oltage Compatible EPIC (Enhanced-Performance Implanted CMOS) Process Operation From ery Slow Input Traitio Temperature-Compeated Threshold Levels High Noise Immunity Same Pinouts as AHCT00
More informationTLC254, TLC254A, TLC254B, TLC254Y, TLC25L4, TLC25L4A, TLC25L4B TLC25L4Y, TLC25M4, TLC25M4A, TLC25M4B, TLC25M4Y LinCMOS QUAD OPERATIONAL AMPLIFIERS
A-Suffix ersions Offer 5-m IO TLC254, TLC254A, TLC254B, TLC254Y, TLC25L4, TLC25L4A, TLC25L4B B-Suffix ersions Offer 2-m IO Wide Range of Supply oltages 1.4 16 True Single-Supply Operation Common-Mode Input
More informationTL594 PULSE-WIDTH-MODULATION CONTROL CIRCUIT
Complete PWM Power Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
More informationSN75C1406 TRIPLE LOW-POWER DRIVERS/RECEIVERS
Meet or Exceed the Requirements of TIA/EIA-232-F and ITU Recommendation V.28 Very Low Power Consumption... 5 mw Typ Wide Driver Supply Voltage Range... ±4.5 V to ±15 V Driver Output Slew Rate Limited to
More information24 DEVICES COVER COMMERCIAL, INDUSTRIAL, AND MILITARY TEMPERATURE RANGES. High Input Impedance...JFET-Input Stage Wide Common-Mode and Differential
SLOS8C FEBRUARY 977 REVISED SEPTEMBER 996 2 DEVICES COVER COMMERCIAL, INDUSTRIAL, AND MILITARY TEMPERATURE RANGES Low Power Consumption High Input Impedance...JFET-Input Stage Wide Common-Mode and Differential
More informationMAX232, MAX232I DUAL EIA-232 DRIVER/RECEIVER
Operates With Single -V Power Supply LinBiCMOS Process Technology Two Drivers and Two Receivers ± 0-V Input Levels Low Supply Current...8 ma Typical Meets or Exceeds TIA/EIA-22-F and ITU Recommendation
More informationTLE206x, TLE206xA, TLE206xB, TLE206xY EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
2 Bandwidth (2 MHz) of the TL6x and TL3x Operational Amplifiers Low Supply Current... 29 µa/ch Typ On-chip Offset oltage Trimming for Improved DC Performance TLE26x, TLE26xA, TLE26xB, TLE26xY EXCALIBUR
More informationNE556, SA556, SE556, SE556C DUAL PRECISION TIMERS
Two Precision Timing Circuits per Package Astable or Monostable Operation TTL-Compatible Output Can Sink or Source Up to 50 ma Active Pullup or Pulldown Designed to be Interchangeable With Signetics SE556,
More informationSN54ALS244C, SN54AS244A, SN74ALS244C, SN74AS244A OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
SNALS2C, SNAS2A, SNALS2C, SNAS2A SDAS2C JUL 9 REISED AUGUST 99 -State Outputs Drive Bus Lines or Buffer Memory Address Registers pnp Inputs Reduce dc Loading Package Optio Include Plastic Small-Outline
More informationLM111, LM211, LM311, LM311Y DIFFERENTIAL COMPARATORS WITH STROBES
Fast Response Times Strobe Capability Maximum Input Bias Current...3 na Maximum Input Offset Current...7 na Can Operate From Single -V Supply Designed Be Interchangeable With National Semiconducr LM, LM,
More informationSN54ALS873B, SN54AS873A, SN74ALS873B, SN74AS873A DUAL 4-BIT D-TYPE LATCHES WITH 3-STATE OUTPUTS SDAS036D APRIL 1982 REVISED AUGUST 1995
3-State Buffer-Type Outputs Drive Bus Lines Directly Bus-Structured Pinout Package Optio Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Plastic (NT) and Ceramic (JT) DIPs
More informationSN75150 DUAL LINE DRIVER
Meets or Exceeds the Requirement of TIA/EIA-232-F and ITU Recommendation V.28 Withstands Sustained Output Short Circuit to Any Low-Impedance Voltage Between 25 V and 25 V 2-µs Maximum Transition Time Through
More informationSN5407, SN5417, SN7407, SN7417 HEX BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS
Converts TTL Voltage Levels to MOS Levels High Sink-Current Capability Clamping Diodes Simplify System Design Open-Collector Driver for Indicator Lamps and Relays s Fully Compatible With Most TTL Circuits
More informationNE556, SA556, SE556 DUAL PRECISION TIMERS
DUAL PECISION TIMES Two Precision Timing Circuits per Package Astable or Monostable Operation TTL-Compatible Output Can Sink or Source Up to 150 ma Active Pullup or Pulldown Designed to be Interchangeable
More informationTL1451AC, TL1451AY DUAL PULSE-WIDTH-MODULATION CONTROL CIRCUITS
SLVS4C FEBRUARY 983 REVISED OCTOBER 995 Complete PWM Power Control Circuitry Completely Synchronized Operation Internal Undervoltage Lockout Protection Wide Supply Voltage Range Internal Short-Circuit
More informationULN2804A DARLINGTON TRANSISTOR ARRAY
HIGH-VOLTAGE, HIGH-CURRENT 500-mA-Rated Collector Current (Single ) High-Voltage s...50 V Clamp Diodes Inputs Compatible With Various Types of Logic Relay Driver Applications Compatible With ULN2800A-Series
More informationTL780 SERIES POSITIVE-VOLTAGE REGULATORS
±1% Output Tolerance at ±2% Output Tolerance Over Full Operating Range Thermal Shutdown description Internal Short-Circuit Current Limiting Pinout Identical to µa7800 Series Improved Version of µa7800
More informationSN54HC373, SN74HC373 OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS SCLS140B DECEMBER 1982 REVISED MAY 1997
Eight High-Current Latches in a Single Package High-Current -State True s Can Drive up to LSTTL Loads Full Parallel Access for Loading Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline
More informationMC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A QUADRUPLE LINE RECEIVERS
MC89, MC89A, SN89, SN89A, SN789, SN789A SLLS9B SEPTEMPER 97 REVISED MAY 99 Input Resistance... kω to 7 kω Input Signal Range...± V Operate From Single -V Supply Built-In Input Hysteresis (Double Thresholds)
More informationSN54ALS74A, SN54AS74A, SN74ALS74A, SN74AS74A DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH CLEAR AND PRESET
Package Optio Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs TYPE TYPICAL MAXIMUM CLOCK FREUEY (CL = 0 pf) (MHz) TYPICAL POWER
More informationSN54HC04, SN74HC04 HEX INVERTERS
SCLS07B DECEMBER 92 REVISED MAY 997 Package Options Include Plastic Small-Outline (D), Shrink Small-Outline (DB), Thin Shrink Small-Outline (PW), and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK),
More informationAdvanced Regulating Pulse Width Modulators
Advanced Regulating Pulse Width Modulators FEATURES Complete PWM Power Control Circuitry Uncommitted Outputs for Single-ended or Push-pull Applications Low Standby Current 8mA Typical Interchangeable with
More informationSN54HC573A, SN74HC573A OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS SCLS147B DECEMBER 1982 REVISED MAY 1997
High-Current -State s Drive Bus Lines Directly or up to LSTTL Loads Bus-Structured Pinout Package Options Include Plastic Small-Outline (DW) and Ceramic Flat (W) Packages, Ceramic Chip Carriers (FK), and
More information54ACT11109, 74ACT11109 DUAL J-K POSITIVE-EDGE-TRIGGERED FLIP-FLOPS WITH CLEAR AND PRESET
Inputs Are TTL-Voltage Compatible Flow-Through Architecture Optimizes PCB Layout Center-Pin V CC and GND Configuratio Minimize High-Speed Switching Noise EPIC (Enhanced-Performance Implanted CMOS) 1-µm
More informationTL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS
Complete PWM Power-Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
More informationSN54AHCT174, SN74AHCT174 HEX D-TYPE FLIP-FLOPS WITH CLEAR
Inputs Are TTL-Voltage Compatible EPIC (Enhanced-Performance Implanted CMOS) Process Contain Six Flip-Flops With Single-Rail s Applicatio Include: Buffer/Storage Registers Shift Registers Pattern Generators
More informationTL-SCSI285 FIXED-VOLTAGE REGULATORS FOR SCSI ACTIVE TERMINATION
Fully Matches Parameters for SCSI Alternative 2 Active Termination Fixed 2.85-V Output ±1% Maximum Output Tolerance at T J = 25 C 0.7-V Maximum Dropout Voltage 620-mA Output Current ±2% Absolute Output
More informationTHS6092, THS ma, +12 V ADSL CPE LINE DRIVERS
Remote Terminal ADSL Line Driver Ideal for Both Full Rate ADSL and G.Lite Compatible With 1:2 Transformer Ratio Wide Supply Voltage Range 5 V to 14 V Ideal for Single Supply 12-V Operation Low 2.1 pa/
More informationMC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS
Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-422-B and EIA/TIA-423-B and ITU Recommendations V.10 and V.11 3-State, TTL-Compatible s Fast Transition Times Operates From Single 5-V Supply
More informationSN54HCT373, SN74HCT373 OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS
Inputs Are TTL-Voltage Compatible Eight High-Current Latches in a Single Package High-Current -State True s Can Drive up to LSTTL Loads Full Parallel Access for Loading Package Optio Include Plastic Small-Outline
More informationSN54AS825A, SN74AS825A 8-BIT BUS-INTERFACE FLIP-FLOPS WITH 3-STATE OUTPUTS SDAS020B JUNE 1984 REVISED AUGUST 1995
Functionally Equivalent to AMD s AM2982 Improved I OH Specificatio Multiple Output Enables Allow Multiuser Control of the Interface Outputs Have Undershoot-Protection Circuitry Power-Up High-Impedance
More informationTL FIXED-VOLTAGE REGULATORS FOR SCSI ACTIVE TERMINATION
Fully Matches Parameters for SCSI Alternative 2 Active Termination Fixed 2.85-V Output ±1.5% Maximum Output Tolerance at T J = 25 C 1-V Maximum Dropout Voltage 500-mA Output Current ±3% Absolute Output
More informationSN55115, SN75115 DUAL DIFFERENTIAL RECEIVERS
SN, SN7 Choice of Open-Collector or Active Pullup (Totem-Pole) Outputs Single -V Supply Differential Line Operation Dual-Channel Operation TTL Compatible ± -V Common-Mode Input Voltage Range Optional-Use
More informationSN75150 DUAL LINE DRIVER
Meets or Exceeds the Requirement of ANSI EIA/TIA-232-E and ITU Recommendation V.28 Withstands Sustained Output Short Circuit to Any Low-Impedance Voltage Between 25 V and 25 V 2-µs Max Transition Time
More informationSN54ALS688, SN74ALS688 8-BIT IDENTITY COMPARATORS
Compare Two -Bit Words Totem-Pole Outputs () ALS Are Identical to ALS2 Package Options Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J)
More informationSN54ALS563B, SN74ALS563B OCTAL D-TYPE TRANSPARENT LATCHES WITH 3-STATE OUTPUTS
-State Buffer-Type s Drive Bus Lines Directly Bus-Structured Pinout Package Optio Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), Standard Plastic (N) and Ceramic (J) 00-mil DIPs,
More informationAdvanced Regulating Pulse Width Modulators
Advanced Regulating Pulse Width Modulators FEATURES Complete PWM Power Control Circuitry Uncommitted Outputs for Single-ended or Push-pull Applications Low Standby Current 8mA Typical Interchangeable with
More informationTHS4061, THS MHz HIGH-SPEED AMPLIFIERS
High Speed 80 MHz Bandwidth (G =, 3 db) 00 V/µs Slew Rate 0-ns Settling Time (0.%) High Output Drive, I O = 5 ma (typ) Excellent Video Performance 75 MHz 0. db Bandwidth (G = ) 0.02% Differential Gain
More informationSN54ALS86, SN54AS86A, SN74ALS86, SN74AS86A QUADRUPLE 2-INPUT EXCLUSIVE-OR GATES
Package Optio Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description These devices contain four independent 2-input exclusive-or
More informationSN75C185 LOW-POWER MULTIPLE DRIVERS AND RECEIVERS
Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU Recommendation V.28 Single Chip With Easy Interface Between UART and Serial-Port Connector Less Than 9-mW Power Consumption Wide Driver Supply
More informationSN75C185 LOW-POWER MULTIPLE DRIVERS AND RECEIVERS
Meets or Exceeds the Requirements of ANSI EIA/TIA-232-E and ITU Recommendation V.28 Single Chip With Easy Interface Between UART and Serial Port Connector Less Than 9-mW Power Consumption Wide Driver Supply
More informationSwitched Mode Controller for DC Motor Drive
Switched Mode Controller for DC Motor Drive FEATURES Single or Dual Supply Operation ±2.5V to ±20V Input Supply Range ±5% Initial Oscillator Accuracy; ± 10% Over Temperature Pulse-by-Pulse Current Limiting
More informationTL05x, TL05xA, TL05xY ENHANCED-JFET LOW-OFFSET OPERATIONAL AMPLIFIERS
TLx, TLxA, TLxY Direct Upgrades TL7x and TL8x BiFET Operational Amplifiers Faster Slew Rate (2 /µs Typ) Without Increased Power Consumption On-Chip Offset oltage Trimming for Improved DC Performance and
More informationTL5632C 8-BIT 3-CHANNEL HIGH-SPEED DIGITAL-TO-ANALOG CONVERTER
8-Bit Resolution Linearity... ±1/2 LSB Maximum Differential Nonlinearity...±1/2 LSB Maximum Conversion Rate...60 MHz Min Nominal Output Signal Operating Range V CC to V CC 1 V TTL Digital Input Voltage
More informationSN54ACT241, SN74ACT241 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
Inputs Are TTL Compatible EPIC (Enhanced-Performance Implanted CMOS) -µm Process Package Optio Include Plastic Small-Outline (DW), Shrink Small-Outline (DB), Thin Shrink Small-Outline (PW), and DIP (N)
More informationSN75C1406 TRIPLE LOW-POWER DRIVERS/RECEIVERS
Meet or Exceed the Requirements of ANSI EIA/TIA-232-E and ITU Recommendation V.28 Very Low Power Consumption 5 mw Typ Wide Driver Supply Voltage Range ±4.5 V to ±15 V Driver Output Slew Rate Limited to
More informationSN54ALS00A, SN54AS00, SN74ALS00A, SN74AS00 QUADRUPLE 2-INPUT POSITIVE-NAND GATES
Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description These devices contain four independent 2-input positive-nand
More informationTIL300, TIL300A PRECISION LINEAR OPTOCOUPLER
ac or dc Signal Coupling Wide Bandwidth...>200 khz High Transfer-Gain Stability...±0.0%/ C 00 V Peak Isolation UL Approval Pending Applications Power-Supply Feedback Medical-Sensor Isolation Opto Direct-Access
More information54AC11241, 74AC11241 OCTAL BUFFERS/LINE DRIVERS WITH 3-STATE OUTPUTS
SCAS032A JUL 187 REVISED APRIL 13 3-State Outputs Drive Bus Lines or Buffer Memory Address Registers Flow-Through Architecture Optimizes PCB Layout Center-Pin V CC and Configuratio Minimize High-Speed
More informationREI Datasheet. UC494A, UC494AC, UC495A, UC495AC Advanced Regulatin Pulse Width Modulators. Quality Overview
UC494A, UC494AC, UC495A, UC495AC Advanced Regulatin Pulse Width Modulators REI Datasheet This entire series of PWM modulators each provide a complete pulse width modulation system in a single monolithic
More information