General Specifications

Transcription

1 eneral Specifications S 0E000E XF Magnetic Flowmeter Flowmeter / The XF magnetic flowmeter series are sophisticated products with outstanding reliability and ease of operation, developed on the basis of decades of fieldproven experience. The combination of a replaceable electrode and the diagnostic to defect adhesion level on the electrodes dramatically improves maintainability. The XF employs the fluid noise free ual Frequency Excitation Method (for sizes up to 00 mm (6 in.)) and the newly added Enhanced ual Frequency Excitation Method as an option for more difficult applications to ensure greater stability and quicker response. Note: The ual Frequency Excitation Method is Yokogawa s unique technology. Fieldbus communication type is also available. FETRES Refer to S 0E0F00E for FONTION TM Fieldbus communication type and S 0E0F0E for PROFIS P communication type marked with seroriented Functionality Fluid dhesion Level iagnosis y constantly monitoring the level of insulating substance on the electrodes, it is possible to determine when maintenance is required. With the utilization of an optional replaceable electrode, the electrodes can be easily removed from the flowmeter and cleaned. Flexible Electrical onnection irection The converter or the terminal box can be rotated arbitrarily to change the directions of electrical connection on the site. lear and Versatile Indications The L indicator employs a large, backlit full dotmatrix, that can facilitate various displays. One to three lines are available. When there is an alarm condition, a full description of the countermeasure is indicated. Easy Setup Parameters The most frequently used parameters are arranged in a group at the top. The infrared switches enable the users to set parameters without opening the cover. Expansion of Product Lineup Improved ccuracy Specification The standard accuracy is 0.35% of reading. lso available is an optional high accuracy calibration rated at 0.% of reading. Flowmeter Extra Small Flange Type The flange type is now available from a.5 mm size. Various Sanitary onnections variety of sanitary connections are available, such as Trilamp, ISO, IN and SMS. Enhanced Performance and Specifications Enhanced ual Frequency Excitation Method The Enhanced ual Frequency Excitation Method can be optionally selected. For difficult applications such as for high concentration slurries or low conductivity fluid, extremely stable measurements can be realized. Improved Minimum onductivity The newly designed XF converter permits the measurement of fluids with conductivity as low as µs/cm. ghspeed Pulse Output The pulse rate now goes up to 0,000 pps (pulse/ second) for use with high speed applications such as in short time batch processes. Versatile Input/ouput Function for Flowmeter ONTENTS Features P. Standard Specifications P. Hazardous rea lassification P. Standard Performance P.6 Normal Operating onditions P. autions for Installation P.3 ccessories P. Terminal onfiguration and Terminal Wiring P. Model and Suffix ode P.5 Optional Specifications for s P.37 External imensions P.3 Sizing ata P.6 Ordering Information P.6 Yokogawa Electric orporation 93, Nakacho, Musashinoshi, Tokyo, 0 Japan Tel.: +53 Fax.: +50 S 0E000E opyright June 3 th Edition June 0

2 STNR SPEIFITIONS onverter ( flowmeter) The contents of (*) and (*) described in the converter specifications are follows. *: Select two points from: one pulse output, one alarm output, one status input, or two status outputs. *: For models without an indicator, the onfiguration tool (Such as HHT (handheld terminal) or FieldMate TM, etc) is necessary to set parameters. Excitation Method: Standard dual frequency excitation:.5 to 00 mm (0. to 6 in.) Enhanced dual frequency excitation: 5 to mm (.0 to.0 in.) (Optional code HF or HF) Input Signal (*) : One Status Input: ry contact Load Resistance: Ω or less (ON), 00 kω or more (OFF) Output Signals : One urrent Output: to 0 m (load resistance: 7Ω maximum, including cable resistance) One Pulse Output (*): Transistor contact output (open collector) ontact capacity: 30 V (OFF), m (ON) Output rate: to 0,000 pps (pulse/second) One larm Output (*): Transistor contact output (open collector) ontact capacity: 30 V (OFF), m (ON) Two Status Outputs (*): Transistor contact output (open collector) ontact capacity: 30 V (OFF), m (ON) ommunication Signals : RIN or HRT communication signal (Superimposed on the to 0 m signal) istance from Power Line: 5 cm (6 in.) or more (Parallel wiring should be avoided.) RIN: ommunication istance: p to.5 km (0.93 miles), when polyethylene insulated PVsheathed cables (EV cables) are used. ommunication distance varies depending on the type of cable and wiring used. Load Resistance: to Ω (including cable resistance) Load apacitance: 0. µf or less Load Inductance: 3.3 mh or less Input Impedance of ommunicating evice: 0 kω or more (at. khz) HRT: Load Resistance: to 600Ω (including cable resistance) Note: HRT is a registered trademark of the HRT ommunication Foundation. ata Security uring Power Failure: ata (parameters, totalizer value, etc.) storage by EEPROM. No backup battery required. Indicator (*): Full dotmatrix L (3 3 pixels) Lightning Protector: The lightning protector is built into the current output and pulse/alarm/status input and output terminals. When optional code is selected, the lightning protector is built into the power terminals. Protection: eneralpurpose se/sanitary Type/TIIS Flameproof type: IP66, IP67 Explosion proof type except TIIS: In case of explosion proof type except TIIS, refer to description of "Enclosure" in "HZROS RE LSSIFITION". oating: ase and over: orrosionresistant coating oating olor; Mint green coating (Munsell /.9 or its equivalent) onverter Material: ase and over : luminum alloy Mounting/Shapes ( Flowmeter): Electrical onnection:nsi / NPT female ISO M0.5 female JIS / (PF/) female irection of Electrical onnection: The direction can be changed even after delivery. Terminal onnection: M size screw terminal rounding: rounding resistance 00 Ω or less When optional code is selected, grounding resistance 0 Ω or less shall be applied. * In case of explosion proof type except TIIS, follow the domestic electrical requirements as regulated in each country. * In case of TIIS Flameproof type, refer to description of HZROS RE LSSIFITION. Functions How to Set Parameters (*): The indicator s L and three infrared switches enable users to set parameters without opening the case cover. Parameters can also be set with the configuration tool (Such as HHT (handheld terminal) or FieldMate, etc.). The language for the HHT is English only. isplayed Languages (*): sers can choose a language from among English, Japanese, erman, French, Italian, and Spanish. Instantaneous Flow Rate/Totalized Value isplay Functions (for models with an indicator) (*): The full dotmatrix L enables user selections of displays from one line to three lines for: Instantaneous flow rate Instantaneous flow rate (%) Instantaneous flow rate (bar graph) urrent output value (m) Totalized forwarddirection flow rate Totalized reversedirection flow rate Totalized differential flow rate Tag No. Results of electrode adhesion diagnostics ommunication type ll Rights Reserved. opyright 3, Yokogawa Electric orporation S 0E000E June, 000

3 Totalizer isplay Function (*): The flow rate is counted one pulse at a time according to the setting of totalization pulse weights. For forward and reverse flow measurement functions, the totalized values of the flow direction (forward or reverse) and the flow direction are displayed on the indicator together with the units. The difference of totalized values between the forward and reverse flow rate can be displayed. Totalization for the reverse flow rate is carried out only when Forward and reverse flow measurement functions is selected. amping Time onstant (*): Time constant can be set from 0. second to.0 seconds (63% response). The default is 3 seconds. Span Setting Function (*): Span flows can be set in units such as volume flow rate, mass flow rate, time, or flow rate value. The velocity unit can also be set. Volume Flow Rate nit: kcf, cf, mcf, Mgal (S), kgal (S), gal (S), mgal (S), kbbl (S)*, bbl (S)*, mbbl (S)*, µbbl (S)*, Ml (megaliter), m 3, kl (kiloliter), l (liter), cm 3 Mass Flow Rate nit (ensity must be set.): klb (S), lb (S), t (ton), kg, g Velocity nit: ft, m (meter) Time nit: s (sec), min, h (hour), d (day) * S oil or S eer can be selected. Pulse Output (*)(*): Scaled pulse can be output by setting a pulse weight. Pulse Width: uty % or fixed pulse width (0.05, 0., 0.5,, 0, 33,, 00 ms) can be selected. Output Rate: to 0,000 pps (pulse/second) Multirange Function (*)(*): Range switching via status input Status input enables the switching of up to two ranges. utomatic range switching When the flow rate exceeds 00 % of the range, transition to the next range (up to four ranges) is carried out automatically. Range swiching can be confirmed by status outputs and indicator. Forward and Reverse Flow Measurement Functions (*)(*): Flows in both forward and reverse directions can be measured. The reverse flow measurement can be confirmed by status output and indicator. Totalization Switch (*)(*): The status output is carried out when a totalized value becomes equal to or greater than the set value. 3 Preset Totalization (*)(*): The parameter setting or status input enables a totalized value to be preset to a setting value or zero. 0% Signal Lock (*)(*): Status input forcibly fixes the instantaneous flow rate display, current output, pulse output, and flow rate totalization to 0%. larm Selection Function (*): larms are classified into the System larms (hard failures), Process larms (such as Empty Pipe, Signal Overflow and dhesion larm ), Setting larms, and Warnings. Whether alarms should be generated or not can be selected for each item. The current output generated for an alarm can be selected from among. m or less, fixed to m,.6 m or more, or HOL. larm Output (*)(*): larms are generated only for the items selected via the larm Selection Function if relevant failures occur. Self iagnostics Functions (*): If alarms are generated, details of the System larms, Process larms, Setting larms and Warnings are displayed together with concrete descriptions of countermeasures. Flow pper/lower Limit larms (*)(*): If a flow rate becomes greater or smaller than the set value, this alarm is generated. In addition, two upper limits (H, HH) and two lower limits (L, LL) can be set. If a flow rate becomes greater or smaller than any of the set values, the status is output. Electrode dhesion iagnostics Function (*) (*): This function enables monitoring of the adhesion level of insulating substances to the electrodes. epending on the status of adhesion, users are notified by a warning or an alarm via status outputs. If replaceable electrodes are used, they can be removed and cleaned when adhesion occurs. ll Rights Reserved. opyright 3, Yokogawa Electric orporation S 0E000E June, 000

4 s ( / Flowmeter) of XF s: XF Standard (Lay length code ) se Process onnection Lining Flowmeter eneralpurpose se Wafer Flange PF Polyurethane Rubber Natural Soft Rubber EPM Rubber eramics (*) PF Polyurethane Rubber Natural Soft Rubber EPM Rubber.5 (0.), 5 (0.), 0 (0.), 5 (0.5), 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 () 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 () (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 () (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 () 5 (0.5), 5 (.0), 0 (.5), (.0), 0 (3.0), 00 (.0), (6.0), (.0).5 (0.), 5 (0.), 0 (0.), 5 (0.5), 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 (), 3 (), 00 (6) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 (), 3 (), 00 (6), 0(0), 600 (), 700 (), 00 (3), 900(36), 000(0), 00(), (), 3(5), 0(60), 600(6), 00(7), 0(0), (), 00(96),600(0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 (), 3 (), 00 (6), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 (), 3(), 00(6) (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 (), 3(), 00(6) gh rade ccuracy 0.% of Rate (*3) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) Enhanced ual Frequency Excitation (Optional code HF,HF) (*3) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) Replaceable Electrode (Electrode structure code ) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 () 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 () 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 (), 3 (), 00 (6) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 (), 3 (), 00 (6) nion Joint eramics (*).5 (0.), 5 (0.), 0 (0.) 5 (.0), 0 (.5), (.0), 0 (3.0), 00 (.0), (6.0), (.0) 5 (.0), 0 (.5), (.0), 0 (3.0), 00 (.0), (6.0), (.0) (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) nit: mm (in.) ll Rights Reserved. opyright 3, Yokogawa Electric orporation S 0E000E June, 000

5 5 of XF s: XF Standard (Lay length code ) (continued) se Process onnection Lining Flowmeter Submersible Type Explosion proof Type Sanitary Type Wafer Flange Wafer Flange lamp: Trilamp (*), IN3676 ISO5/SMS306 nion: IN5 ISO53 (*5) SMS5 (*6) utt Weld: IN, ISO03 PF Polyurethane Rubber Natural Soft Rubber EPM Rubber PF Polyurethane Rubber Natural Soft Rubber EPM Rubber PF eramics (*) PF PF 5 (0.5), 5 (.0), 3 (.5), 0 (.5) (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 () 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 () (.0), 65 (.5),0 (3.0), 00 (.0),5 (5.0), (6.0), (.0), (0), 300 () (.0), 65 (.5),0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 () 5 (0.5), 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 (), 3 (), 00 (6) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 (), 3 (), 00 (6), 0(0), 600 (), 700 (), 00 (3), 900(36), 000(0), 00(), (), 3(5), 0(60), 600(6), 00(7), 0(0), (), 00(96),600(0) (.0), 65 (.5), 0(3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 (), 3 (), 00 (6) (.0), 65 (.5), 0(3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 (), 3 (), 00 (6).5 (0.), 5 (0.), 0 (0.), 5 (0.5), 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 () 5 (0.5), 5 (.0), 0 (.5), (.0), 0 (3.0), 00 (.0), (6.0), (.0).5 (0.), 5 (0.), 0 (0.), 5 (0.5), 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0), (0), 300 (), 3 (), 00 (6) 5 (0.5), 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) 5 (.0), 0 (.5), (.0), 0 (3.0), 00 (.0), (6.0), (.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) 5(.0),0(.5),(.0), 0(3.0),00(.0), (6.0),(.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) nion Joint eramics (*).5 (0.), 5 (0.), 0 (0.) 5 (.0), 3 (.5), 5 (.0), 3 (.5), 0 (.5), (.0), 0 (.5), (.0), 65 (.5), 0 (3.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0) 00 (.0), 5 (5.0) *: XF standard lay length dimensions for wafer type ceramics linings are the same as those for M ceramics linings. *: XF standard lay length dimensions for union joint type ceramics linings are the same as those for M ceramics linings. *3: Enhanced dual frequency excitation is not available for models with gh grade accuracy. *: Not available with 3 mm (.5 in.), 5 mm (5.0 in.) *5: Not available with 5 mm (5.0 in.) *6: Not available with 5 mm (0.5 in.), 5 mm (5.0 in.) gh rade ccuracy 0.% of Rate (*3) Enhanced ual Frequency Excitation (Optional code HF,HF) (*3) (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) (.0), 65 (.5), 0 (3.0), 00 (.0), 5 (5.0), (6.0), (.0) nit: mm (in.) Replaceable Electrode (Electrode structure code ) T.EPS ll Rights Reserved. opyright 3, Yokogawa Electric orporation S 0E000E June, 000

6 6 of XF s: Replacement model for earlier M or M E (Lay length code ) se Process onnection Lining Flowmeter eneralpurpose use Submersible Type Wafer (*6) Flange (*7) Wafer (*6) Flange (*7) PF Polyurethane rubber.5 (0.), 5 (0.), 0 (0.), 5 (0.5), 5 (.0), 0 (.5), (.0), 0 (3.0), 00 (.0), (6.0), (.0) 5 (.0), 0 (.5), (.0), 0 (3.0), 00(.0), (6.0), (.0) PF (6.0), (.0), (0) Polyurethane (6.0), (.0), (0) rubber 5 (0.5), 5 (.0), PF 0 (.5), (.0), 0 (3.0), 00 (.0), (6.0), (.0) Polyurethane rubber PF Polyurethane rubber 5 (.0), 0 (.5), (.0), 0 (3.0), 00 (.0), (6.0), (.0) (6.0), (.0), (0) (6.0), (.0), (0) gh rade ccuracy 0.% of Rate Enhanced ual Frequency Excitation (Optional code HF,HF) nit: mm (in.) Replaceable Electrode (Electrode structure code ) 5 (.0), 0 (.5), (.0), 0 (3.0), 00 (.0), (6.0), (.0) 5 (.0), 0(.5), (.0), 0(3.0), 00 (.0), (6.0), (.0) (6.0), (.0) (6.0), (.0), (0) (6.0), (.0) (6.0), (.0), (0) 5 (.0), 0 (.5), (.0), 0 (3.0), 00 (.0), (6.0), (.0) 5 (.0), 0 (.5), (.0), 0 (3.0), 00 (.0), (6.0), (.0) (6.0), (.0) (6.0), (.0) Explosion Wafer (*6) PF.5 (0.), 5 (0.), 0 (0.), 5 (0.5), 5 (.0), 0 (.5), (.0), 0 (3.0), 5 (.0), 0 (.5), (.0), 0 (3.0), 00 (.0), proof Type 00 (.0), (6.0), (.0) (6.0), (.0) Flange (*7) PF (6.0), (.0), (0) (6.0), (.0) T.EPS *6: M lay length dimensions for wafer type of mm (0 in.), and 300 mm ( in.) are the same as those for XF Standard. nd, in case of platinumiridium (grounding ring code P) or tantalum (grounding ring code T) or None (grounding ring code N) in wafer type of.5 mm (0. in.) to 5 mm (0.5 in.), the lay lengths of Replacement model are the same as those for XF Standard. *7: M lay length dimensions for flange type of 5 mm (0.5 in.) to 00 mm (.0 in.), or 300 mm ( in.) to 600 mm (0 in.) are the same as those for XF Standard. However, in case of platinumiridium (grounding ring code P) or tantalum (grounding ring code T) or None (grounding ring code N) in flange type of 5 mm (0.5 in.) to 00 mm (.0 in.), the lay length of XF Standard are longer by approx. mm (0.6 in) than those of earlier M or M E. Protection: eneralpurpose se/sanitary Type/TIIS Flameproof Type: IP66, IP67 Explosion proof type except TIIS: In case of explosion proof type except TIIS, refer to description of Enclosure in HZROS RE LSSIFITION. Submersible Type (only for ): IP6 (onforms to continuous immersion under the following test condition) Test ondition: m below the surface of the water, equivalent to 0.5 MPa hydraulic pressure, for one month. able should be protected at customer site. oating: eneralpurpose se/explosion proof Type:.5 to 5 mm (0. to 5.0 in.) (Wafer type),.5 to 5 mm (0. to 5.0 in.) (Process connection code or of flange type): Housing: No coating (Stainless steel surface) Flange (Flange type only) : No coating (Stainless steel surface) Terminal ox and over ( ): orrosionresistant coating oating color; Mint green (Munsell /.9 or its equivalent) to 300 mm (6.0 to in.) (Wafer type), to 00 mm (6.0 to 6 in.) (Process connection code of flange type), to 600 mm (.0 to 0 in.) (Process connection code of flange type): Housing, Flange (Flange type only), Terminal ox and over ( ): orrosionresistant coating oating color; Mint green (Munsell /.9 or its equivalent) Sanitary Type: 5 to 5 mm (0.5 to 5.0 in.): Housing: No coating (Stainless steel surface) dapter : No coating (Stainless steel surface) Terminal ox and over ( ): orrosionresistant coating oating color; Mint green (Munsell /.9 or its equivalent) Submersible Type: Nontar epoxy coating (black) ll Rights Reserved. opyright 3, Yokogawa Electric orporation S 0E000E June, 000

7 Material:.5 mm (0. in.) to 5 mm (0.5 in.) Mini Flange Pipe Part Name Housing Flange Wafer Type PF/Polyurethane Rubber lining Wafer Type eramics lining [only for 5 mm (0.5 in.)] Sanitary Type [only for 5 mm (0.5 in.)] Wafer Type PF/Polyurethane Rubber lining Wafer Type/nion Joint eramics lining Flange Type PF lining Sanitary Type [only for 5 mm (0.5 in.)] Terminal ox ( ) Material Stainless steeljis SS equivalent Stainless steeljis SS30 or SSF30 (ISI 30 SS/EN.30 equivalent) Stainless steeljis SS3 (EN.30 equivalent) Stainless steeljis SS36L (ISI 36 SS/EN.0 equivalent) Stainless steeljis SS3 (EN.30 equivalent) Stainless steeljis SS3 (EN.30 equivalent) lumina ceramics (99.9%) Stainless steeljis SS3 (EN.30 equivalent) and SS30 (ISI 30 SS/EN.30 equivalent) Stainless steeljis SS3 (EN.30 equivalent) luminum alloy T03.EPS 5 mm (.0 in.) to 5 mm (5.0 in.) Flange Mini Flange Pipe Part Name Housing Process onnection code: ** Process onnection code: ** [( mm (.0 in.) to 5 mm (5.0 in.)] Wafer Type PF/Polyurethane Rubber/ Natural Soft Rubber/ EPM Rubber lining Wafer Type eramics lining Sanitary Type Wafer Type PF/Polyurethane Rubber/ Natural Soft Rubber/ EPM Rubber lining Flange Type PF/Polyurethane Rubber/ Natural Soft Rubber/ EPM Rubber lining Wafer Type eramics lining Sanitary Type Terminal ox ( ) 5 mm (.0 in.) (Lay Length code ) 5 mm (.0 in.) (Lay Length code ) 3 mm (.5 in.) to 5 mm (5.0 in.) 5 mm (.0 in.) to mm (.0 in.) 0 mm (3.0 in.), 00 mm (.0 in.) 5 mm (.0 in.) 3 mm (.5 in.) to 5 mm (5.0 in.) 5 mm (.0 in.) (Lay Length code ) 5 mm (.0 in.) (Lay Length code ) 3 mm (.5 in.) to 5 mm (5.0 in.) 5 mm (.0 in.) 3 mm (.5 in.) to 5 mm (5.0 in.) 5 mm (.0 in.) to 00 mm (.0 in.) 5 mm (.0 in.) 3 mm (.5 in.) to 5 mm (5.0 in.) Material Stainless steeljis SS30 (ISI 30 SS/EN.30 equivalent) Stainless steeljis SS30 or SSF30 (ISI 30 SS/EN.30 equivalent) arbon steeljis SS00 or SFV Stainless steel EN.30 (SS3 equivalent) Stainless steeljis SS30 (STM 3000/IN X6r7/EN.06 equivalent) Stainless steeljis SS30 (STM 3000/IN X6r7/EN.06 equivalent) Stainless steeljis SS3 (EN.30 equivalent) Stainless steeljis SS30 (ISI 30 SS/EN.30 equivalent) Stainless steel EN.30 (SS3 equivalent) lumina ceramics (99.9%) luminum alloy 7 Stainless steeljis SS36L (ISI 36L SS/EN.0 equivalent) Stainless steeljis SS30 (ISI 30 SS/EN.30 equivalent) Stainless steeljis SS30 (ISI 30 SS/EN.30 equivalent) Stainless steeljis SS30 (ISI 30 SS/EN.30 equivalent) Stainless steel EN.30 (SS3 equivalent) Stainless steeljis SS30 (ISI 30 SS/EN.30 equivalent) Stainless steeljis SS3 (EN.30 equivalent) Stainless steeljis SS30 (ISI 30 SS/EN.30 equivalent) T0.EPS ll Rights Reserved. opyright 3, Yokogawa Electric orporation S 0E000E June, 000

8 mm (6.0 in.) to 00 mm (6 in.) Flange Mini Flange Pipe Part Name Housing Process onnection code: ** Process onnection code: ** Wafer Type PF/Polyurethane Rubber/Natural Soft Rubber/ EPM Rubber lining Wafer Type eramics lining [available with mm (6.0 in.), mm (.0 in.)] Flange Type/Wafer Type PF/Polyurethane Rubber/Natural Soft Rubber/ EPM Rubber lining Wafer Type eramics lining [available with mm (6.0 in.), mm (.0 in.)] Terminal ox ( ) Material arbon steeljis SP equivalent Stainless steeljis SS30 or SSF30 (ISI 30 SS/EN.30 equivalent) arbon steeljis SS00 or SFV arbon steeljis SS00 or SFV Stainless steeljis SS30 (ISI 30 SS/EN.30 equivalent) Stainless steeljis SS30 (ISI 30 SS/EN.30 equivalent) lumina ceramics (99.9%) luminum alloy 0 mm (0 in.) to 600 mm (0 in.) Terminal ox ( ) Part Name Housing Flange Pipe ase, over (0 to 000 mm) (0 to 0 in.) ase (00 to 600 mm) ( to 0 in.) over (00 to 600 mm) ( to 0 in.) Material T05.EPS arbon steeljis SS00 equivalent arbon steeljis SS00 or SFV Stainless steeljis SS30 (ISI 30 SS/EN.30 equivalent) luminum alloy Stainless steeljis SS30 (ISI 30 SS/EN.30 equivalent) Electrical connection: arbon steel luminum alloy T05.EPS Electrode: Stainless steeljis SS36L (ISI 36L SS/EN.0 equivalent), Hastelloy* 76 equivalent, Titanium, Tantalum, PlatinumIridium, Tungsten arbide, Platinumlumina cermet(only for ceramics lining) Note : For size over 0 mm and sanitary type, SS36L only. rounding Ring/rounding Electrode: rounding Ring(plate type) Stainless steeljis SS36 (ISI 36 SS/EN.0 equivalent), Stainless steeljis SS36L (ISI 36L SS/EN.0 equivalent), Hastelloy* 76 equivalent, Titanium, Stainless steeljis SS30 (ISI 30 SS/EN.30 equivalent) for size 0 to 000mm (0 to 0 in.) only, SS00 carbon steel lined with stainless steeljis SS36 (ISI 36 SS/EN.0 equivalent) for size 00 to 600mm ( to 0 in.) only. rounding Electrode(electrode type) Fluorocarbon PF lining + grounding electrode (Tantalum, PlatinumIridium) *: Hastelloy is a registered trademark of Haynes International Inc. *: vailable with sizes.5 to mm (0. to.0 in.), PF and ceramics linings only. However, the permeable fluids (such as nitric acid, hydrofluoric acid, or sodium hydroxide at high temperature) are unusable. Wetted Part Material: Lining: Fluorocarbon PF* lining Polyurethane Rubber lining Natural Soft Rubber lining* EPM Rubber lining*3 lumina ceramics lining *: PF is F (.S. Food and rug dministration) approval material. *: Natural soft rubber is a material which can reduce wear of the lining due to fluids mixed with slurries. If the concentration of mixed slurries is high, contact Yokogawa as necessary measures need to be taken separately for the electrodes. *3: EPM rubber lining is superior in the ozone proof. ll Rights Reserved. opyright 3, Yokogawa Electric orporation S 0E000E June, 000

9 9 asket: Joints: se Lining eneralpurpose se / Submersible Type / Explosion proof Type PF/Polyurethane Rubber/ Natural Soft Rubber/ EPM Rubber grounding ring grounding ring eramics Lining Standard eramics nion Joints (size 0 mm or less) weld joint (W) screw joint (N, R) nut asket within Standard Materials for nion Joint No gasket within asket within asket Material (within ) Fluororesin with ceramic fillers (Valqua #700) Process onnection ode W: nion Joint (weld joint) Process onnection ode N, R: union joint (screw joint) Stainless steel (JIS SS36L (NSI 36L SS/EN.0 equivalent)) grounding ring grounding ring Note: ontact Yokogawa office if PV union joint is required. T33.EPS Optional code (,,, or F) Only when selecting the PF lining/ ceramics lining asket within asket within asket Material (within ) : Fluororubber for PV pipes (Viton ) : cidresistant fluororubber for PV pipes (Viton ) : lkaliresistant fluororubber for PV pipes (Viton ) F* : Fluororesin with alkaliresistant carbons for metal pipes *: F is applicable only for ceramics lining. se Standard dapter for clamp connection dapter for union connection dapter for butt weld connection Sanitary Type Optional code (F, SF,, or S) se Lining Standard Optional code (H) grounding ring Flange of user s pipe asket for user s flange asket Material (for user s flange) F, SF: PTFEsheathed nonasbestos, S: hloroprene rubber dapter for clamp connection dapter for union connection dapter for butt weld connection asket Material (within ) EPM (ethylene propylene) rubber H: Silicone rubber Sanitary Type PF T3.EPS asket within Materials for dapters (clamp, union, butt weld) Stainless steeljis SS36L or SSF36L (ISI 36L SS/EN.0 equivalent or NSI F36L SS/EN.35 equivalent) ORing (Replaceable electrode type only): Fluororubber (Part number : 9303SE) T3.EPS Recommended askets etween s nd nser s Flanges: askets Type se compressed nonasbestos fiber gaskets, PTFEsheathed nonasbestos gaskets or gaskets which have equivalent elasticity. For optional codes,, and, use rubber gaskets or others which have equivalent elasticity (such as Tefloncoated rubber gaskets). askets e sure to choose a gasket with an inner and outer diameter that does not protrude inside the piping (refer to item of Inner iameter Of rounding Ring, Outer iameter For Effective Sealing). If the inner diameter of the gasket is too large, or outer diameter of the gasket is too small, fluid leakage may result. T3.EPS ll Rights Reserved. opyright 3, Yokogawa Electric orporation S 0E000E June, 000

10 0 INNER IMETER OF RONIN RIN, OTER IMETER FOR EFFETIVE SELIN; XF Standard:.5 to 00 mm Lining.5 (0.) 5 (0.) 0 (0.) 5 (0.5) 5 (.0) 3 (.5) 0 (.5) (.0) 65 (.5) 0 (3.0) 00 (.0) 5 (5.0) (6.0) (.0) (0) 300 () 3 () 00 (6) Inner diameter of rounding ring [ø] PF/Polyurethane Rubber/ Natural Soft Rubber/ EPM Rubber Outer diameter for effective sealing [ø] Water Flange Water Flange 5 (0.59) [ (0.7)] * 3 (.) 30 (.) 5 (0.59) [ (0.7)] * 3 (.) 30 (.) 5 (0.59) [ (0.7)] * 3 (.) 30 (.) 5 (0.59) 3 (.) 3 (.3) (.0) 53 (.09) 53 (.09) 3 (.3) 5 (.) 5 (.) (.6) 7 (.0) 7 (.0) 53 (.09) (3.3) (3.3) 66 (.60) 03 (.06) 03 (.06) 77 (3.03) (.9) (.9) 0 (.0) 0 (5.5) 0 (5.5) (5.0) 65 (6.) 65 (6.) 6. (5.75) 90 (7.) 90 (7.) 93.6 (7.6) 0 (9.5) 0 (9.5) 3.7 (9.60) 3 (9.57) 300 (.) 35 (.0) 9.7 (.60) 9.3 (.7) 3 (3.70) 360 (.7) 33. (.73) 05 (5.9) (.70) 65 (.3) eramics Inner diameter of rounding ring [ø] 5 (0.59) 7 (.06) 0 (.57) 5 (.05) (3.9) 9 (3.6) (5.67) 9 (7.56) nit : mm (in.) Outer diameter for effective sealing [ø] 33 (.30) 6 (.6) (3.3) (.) 3 (5.) (7.0) 0 (9.5) T5.EPS 0 to 600 mm Lining 0 (0) 600 () 700 () 00 (3) 900 (36) 000 (0) 00 () () 3 (5) 0 (60) 600 (6) 00 (7) 0 (0) () 00 (96) 600 (0) nit : mm (in.) Polyurethane Rubber Inner diameter of rounding ring [ø] 6 (.) [5 (9.09)] * 563 (.6) [59 (3.)] * 665 (6.) [69 (7.)] * 765 (30.) [7 (3.0)] * 55 (33.66) [ (3.96)] * 9 (37.0) [990 (3.97)] * 05 (.7) 5 (6.65) 335 (5.55) 5 (5.6) 55 (6.0) 75 (70.7) 95 (7.) 5 (6.0) 35 (93.9) 55 (0.77) Outer diameter for effective sealing [ø] 570 (.) 675 (6.57) 75 (30.9) 90 (35.0) 990 (3.9) 095 (3.) 30 (.3) 33 (5.5) 90 (5.66) 66 (6.0) 756 (69.3) 9 (76.69) 60 (5.0) 370 (93.3) 50 (0.57) 770 (09.06) T6.EPS Replacement Model for earlier M or M E: nit : mm (in.) Lining PF/Polyurethane Rubber.5 (0.) 5 (0.) 0 (0.) 5 (0.5) 5 (.0) 0 (.5) (.0) 0 (3.0) 00 (.0) (6.0) (.0) (0) Inner diameter of rounding ring [ø] 5 (0.59) 5 (0.59) 5 (0.59) 5 (0.59) 7 (.06) 0 (.57) 5 (.05) (3.9) 9 (3.6) 0.7 (5.6).9 (7.5) 3 (9.57) Outer diameter for effective sealing [ø] Wafer 3 (.) 3 (.) 3 (.) 3 (.) 56 (.0) 7 (.0) 5 (3.35) 5 (.53) (5.57) 90 (7.) 0 (9.5) Flange 05 (.07) 55 (0.0) 35 (.0) T63.EPS *: The I.. of the process connection code:, J, J is values in brackets [ ]. *: The I.. of the process connection code: is values in brackets [ ]. ll Rights Reserved. opyright 3, Yokogawa Electric orporation S 0E000E June, 000

11 of Inner iameter of rounding ring and Outer iameter for Effective Sealing : ø ø asket for ser s flange rounding ring XF lining Electrode onstruction: Nonreplaceable Electrode Type eneralpurpose se/submersible Type/Explosion proof Type: PF, Polyurethane Rubber lining: External insertion type Natural Soft Rubber, EPM Rubber lining: Internal insertion type eramics lining: type Sanitary Type: Internal insertion type Replaceable Electrode Type Electrode parts can be put into unit to facilitate replacement or mounting at customer site. The optional dedicated tool (F907SK) is required. Replaceable electrodes are available for the following: XF standard: Mounting/Shapes ( ): Electrical onnection: NSI / NPT female ISO M0.5 female JIS / (PF/) female irection of Electrical onnection: The direction can be changed even after delivery. Note: In case of submersible types, an optional code H, and sizes of 00 mm or larger, the direction can not be changed after delivery. Terminal onnection at Terminal ox: M size screw rounding: rounding resistance 00 Ω or less * In case of explosion proof type except TIIS, follow the domestic electrical requirements as regulated in each country. * In case of TIIS Flameproof type, refer to description of HZROS RE LSSIFTION. ombined onverter: remote flowtube for sizes of up to 00 mm can be combined with the XF onverter or the XF onverter. If a combined converter is changed from XF to XF or vice versa, a new meter factor must be adjusted by flow calibrations. In case that size mm (0 in.) or larger is used in low conductivity or high concentration slurries, please use the XF onverter. remote flowtube for sizes of 0 mm or larger can be combined with the XF onverter only. Maximum able Length: ombination of XF remote and XF: up to m (660 ft) ombination of XF remote and XF: up to 00 m (330 ft) se eneral Purpose se Process onnection Wafer Flange vailable 5 to 300 mm (.0 to in.) 5 to 00 mm (.0 to 6 in.) Lining PF/ Polyurethane Rubber Electrode Material JIS SS36L (ISI 36L SS/EN.0 equivalent) ( * ) T06.EPS Replacement model for earlier M or M E: se eneral Purpose se Process onnection Flange vailable to mm (6.0 to 0 in.) Lining PF/ Polyurethane Rubber Electrode Material JIS SS36L (ISI 36L SS/EN.0 equivalent) ( * ) T07.EPS *: If any other electrode materials are required, please contact Yokogawa office. ll Rights Reserved. opyright 3, Yokogawa Electric orporation S 0E000E June, 000

12 HZROS RE LSSIFITION FM: *XF00 XF00 pplicable Standard: FM3600, FM360, FM365, FM30, NSI/NEM ( Flowmeter) Explosion proof for lass I, ivision, roups,, &. ustignition proof for lass II/III, ivision, roups E, F &. Intrinsically safe (electrodes) for lass I, ivision, roups,, &. SEL LL ONITS WITHIN INHES WHEN INSTLLE IN IV., SELS NOT REQIRE Electrode ircuit m: Vac/dc Maximum power supply voltage: Vac/30 Vdc Excitation ircuit: 0V max Enclosure: NEM X ode: T6 Refer to following table; ode T6 T5 T T3 Maximum Process +70 (+5 F) +5 (+5 F) +0 (+ F) +30 (+66 F) Minimum Process 0 ( 0 F) 0 ( 0 F) 0 ( 0 F) 0 ( 0 F) mbient Temp.: 0 to +60 ( 0 F to +0 F) T7_.EPS ( ) Explosion proof for lass I, ivision, roups,, &. ustignition proof for lass II/III, ivision, roups E, F &. Intrinsically safe (electrodes) for lass I, ivision, roups,, &. SEL LL ONITS WITHIN INHES WHEN INSTLLE IN IV., SELS NOT REQIRE Electrode ircuit m: Vac/dc Excitation ircuit: 70V max Enclosure: NEM X ode: T6 Refer to following table; TEX: *XF00 XF00 pplicable Standard: EN 0, EN 0, EN 09, EN 00, EN 0, EN ertificate: KEM 03TEX35 ( Flowmeter) TEX Flameproof Type roup: II ategory: EEx dme[ia] II T6...T3 Electrode ircuit m: Vac/dc Maximum power supply voltage: Vac/30 Vdc Excitation ircuit: 0V max Enclosure: IP66, IP67 lass: lass T6 T5 T T3 Maximum Process +70 (+5 F) +5 (+5 F) +0 (+ F) +30 (+66 F) Minimum Process 0 ( 0 F) 0 ( 0 F) 0 ( 0 F) 0 ( 0 F) mbient Temp.: 0 to +60 ( 0 F to +0 F) TEX Type of Protection ust roup: II ategory: Electrode ircuit m: Vac/dc Maximum power supply voltage: Vac/30 Vdc Excitation ircuit: 0V max Enclosure: IP66, IP67 Maximum surface temperature: Maximum Surface T75 (+67 F) T5 (+5 F) T00 (+ F) T0 (+30 F) Maximum Process +70 (+5 F) +5 (+5 F) +0 (+ F) +30 (+66 F) T9.EPS mbient Temp.: 0 to +60 ( 0 F to +0 F) T7.EPS ode T6 T5 T T3 Maximum Process +70 (+5 F) +5 (+5 F) +0 (+ F) + (+30 F) Minimum Process 0 ( 0 F) 0 ( 0 F) 0 ( 0 F) 0 ( 0 F) mbient Temp.: 0 to +60 ( 0 F to +0 F) T_.EPS Note: Installation shall be in accordance with the manufacturer s instructions and National Electric ode, NSI/NFP70, and Local Electric ode. ll Rights Reserved. opyright 3, Yokogawa Electric orporation S 0E000E June, 000

13 ( ) TEX Flameproof Type roup: II ategory: EEx dme[ia] II T6...T3 Electrode ircuit m: Vac/dc Excitation ircuit: 70V max Enclosure: IP66, IP67 lass: lass T6 T5 T T3 Maximum Process +70 (+5 F) +5 (+5 F) +0 (+ F) + (+30 F) Minimum Process 0 ( 0 F) 0 ( 0 F) 0 ( 0 F) 0 ( 0 F) mbient Temp.: 0 to +60 ( 0 F to +0 F) TEX Type of Protection ust roup: II ategory: Electrode ircuit m: Vac/dc Excitation ircuit: 70V max Enclosure: IP66, IP67 Maximum surface temperature: Maximum Surface T75 (+67 F) T5 (+5 F) T00 (+ F) T5 (+39 F) Maximum Process +70 (+5 F) +5 (+5 F) +0 (+ F) + (+30 F) T30.EPS mbient Temp.: 0 to +60 ( 0 F to +0 F) T.EPS 3 S: *XF00 XF00 pplicable Standard: For S. Series;. No 0,. No 0.,. No 0.5,. No 5,. No 30,. No 9,. No 57,. No 00. For S E79 Series; N/SE790, N/SE79, N/SE797, N/SE79, N/SE79 ertificate: 3 Process Sealing ertification: ual Seal certified by S to the requirements of NSI/IS.7.0. No additional sealing required. Primary seal failure annunciation; eterioration of the flowrate output at nonzero flow point. nstable flowrate output at zero flow point. ( Flowmeter) For S. Series Explosion proof for lass I, ivision, roups,, &. ustignition proof for lass II/III, ivision, roups E, F &. Intrinsically safe (electrodes) for lass I, ivision, roups,, &. SEL LL ONITS WITHIN cm OF THE ENLOSRE WHEN INSTLLE IN IV., SELS NOT REQIRE Electrode ircuit m: Vac/dc Maximum power supply voltage: Vac/30 Vdc Excitation ircuit: 0V max Enclosure: Type X ode: ode T6 T5 T T3 Maximum Process +70 (+5 F) +5 (+5 F) +0 (+ F) +30 (+66 F) Minimum Process 0 ( 0 F) 0 ( 0 F) 0 ( 0 F) 0 ( 0 F) mbient Temp.: 0 to +60 ( 0 F to +0 F) T7.EPS ll Rights Reserved. opyright 3, Yokogawa Electric orporation S 0E000E June, 000

14 For S E79 Series Flameproof for Zone, Ex dme[ia] II T6...T3 Intrinsically safe (electrodes), Ex ia II T6...T3 Electrode ircuit m: Vac/dc Maximum power supply voltage: Vac/30 Vdc Excitation ircuit: 0V max Enclosure: IP66, IP67 ode: ode T6 T5 T T3 Maximum Process +70 (+5 F) +5 (+5 F) +0 (+ F) +30 (+66 F) Minimum Process 0 ( 0 F) 0 ( 0 F) 0 ( 0 F) 0 ( 0 F) mbient Temp.: 0 to +60 ( 0 F to +0 F) T7.EPS ( ) For S. Series Explosion proof for lass I, ivision, roups,, &. ustignition proof for lass II/III, ivision, roups E, F &. Intrinsically safe (electrodes) for lass I, ivision, roups,, &. SEL LL ONITS WITHIN cm OF THE ENLOSRE WHEN INSTLLE IN IV., SELS NOT REQIRE Electrode ircuit m: Vac/dc Excitation ircuit: 70V max Enclosure: Type X ode: ode T6 T5 T T3 Maximum Process +70 (+5 F) +5 (+5 F) +0 (+ F) + (+30 F) Minimum Process 0 ( 0 F) 0 ( 0 F) 0 ( 0 F) 0 ( 0 F) mbient Temp.: 0 to +60 ( 0 F to +0 F) For S E79 Series Flameproof for Zone, Ex dme[ia] II T6...T3 Intrinsically safe (electrodes), Ex ia II T6...T3 Electrode ircuit m: Vac/dc Excitation ircuit: 70V max Enclosure: IP66, IP67 ode: T.EPS IEEx: *XF00 XF00 pplicable Standard: IE600790, IE60079, IE600797, IE60079, IE60079, IE60, IE6, IE Edition. ertificate: IEEx KEM ( Flowmeter) IEEx Flameproof Type Ex demb[ia] II T6...T3 Electrode ircuit m: Vac/dc Maximum power supply voltage: Vac/30 Vdc Excitation ircuit: 0V max Enclosure: IP66, IP67 lass: lass T6 T5 T T3 Process 0 to +70 ( 0 F to +5 F) 0 to +5 ( 0 F to +5 F) 0 to +0 ( 0 F to + F) 0 to +30 ( 0 F to +66 F) mbient Temp.: PF Lining; 0 to +60 ( 0 F to +0 F) eramics Lining; 5 to +60 (5 F to +0 F) IEEx Type of Protection ust Ex t IP6x T95, T05, T0, T30 Electrode ircuit m: Vac/dc Maximum power supply voltage: Vac/30 Vdc Excitation ircuit: 0V max Enclosure: IP66, IP67 Maximum surface temperature: Maximum Surface T95 (+03 F) T05 (+ F) T0 (+ F) T30 (+66 F) Process 0 to +70 ( 0 F to +5 F) 0 to +5 ( 0 F to +5 F) 0 to +0 ( 0 F to + F) 0 to +30 ( 0 F to +66 F) mbient Temp.: PF Lining; 0 to +60 ( 0 F to +0 F) eramics Lining; 5 to +60 (5 F to +0 F) T73.EPS T7.EPS ode Maximum Process Minimum Process T6 +70 (+5 F) 0 ( 0 F) T5 T +5 (+5 F) +0 (+ F) 0 ( 0 F) 0 ( 0 F) T3 + (+30 F) 0 ( 0 F) mbient Temp.: 0 to +60 ( 0 F to +0 F) T.EPS ll Rights Reserved. opyright 3, Yokogawa Electric orporation S 0E000E June, 000

15 ( ) IEEx Flameproof Type Ex demb[ia] II T6...T3 Electrode ircuit m: Vac/dc Excitation ircuit: 70V max Enclosure: IP66, IP67 lass: lass T6 T5 T T3 Process 0 to +70 ( 0 F to +5 F) 0 to +5 ( 0 F to +5 F) 0 to +0 ( 0 F to + F) 0 to + ( 0 F to +30 F) mbient Temp.: PF Lining; 0 to +60 ( 0 F to +0 F) eramics Lining; 5 to +60 (5 F to +0 F) IEEx Type of Protection ust Ex t IP6x T95, T05, T0, T35 Electrode ircuit m: Vac/dc Excitation ircuit: 70V max Enclosure: IP66, IP67 Maximum surface temperature: Maximum Surface T95 (+03 F) T05 (+ F) T0 (+ F) T35 (+75 F) Process 0 to +70 ( 0 F to +5 F) 0 to +5 ( 0 F to +5 F) 0 to +0 ( 0 F to + F) 0 to + ( 0 F to +30 F) mbient Temp.: PF Lining; 0 to +60 ( 0 F to +0 F) eramics Lining; 5 to +60 (5 F to +0 F) T75.EPS T76.EPS 5 TIIS: ( Flowmeter) onstruction: Ex de[ia] II T : onverter ; Explosion proof ; Increased Safety and Intrinsically Safety(ia) Electrode ; Intrinsically Safety(ia) mbient : 0 to 60 (power supply code ) : 0 to (power supply code ) Fluid : 0 max Electrode ircuit: V / Maximum power supply voltage: V /30V rounding: JIS lass (grouding resister 0Ω or less) or JIS lass (grounding resister 0Ω or less) *In case that ambient temperature exceeds, use heatresistant cables with maximum allowable temperature of 70 or above. ( ) onstruction: Ex de[ia] II T : Terminal box ; Explosion proof ; Increased Safety and Intrinsically Safety(ia) Electrode; Intrinsically Safety(ia) mbient : 0 to 60 Fluid : 0 max Electrode ircuit: V / rounding: JIS lass (grouding resistance 0Ω or less) or JIS lass (grounding resistance 0Ω or less) Note : In case of TIIS Flameproof type, a remote flowtube is available for combined use with the XF converter only. *In case that ambient temperature exceeds, use heatresistant cables with maximum allowable temperature of 70 or above. ll Rights Reserved. opyright 3, Yokogawa Electric orporation S 0E000E June, 000

16 STNR PERFORMNE ccuracy Note: The accuracy of a product before shipment is defined as totalized value at the result of calibration test in our water actual flow test facility. alibrated conditions in our water actual test facility are as follows: Fluid temperature; 0 ± 0 mbient temperature; 0 ± 5 Length of straight runs;0 or more on the upstream side; 5 or more on the downstream side Reference conditions; Similar to S EN90 (993); ISO 90 (99) Pulse Output: PF/eramics Lining: mm (in.).5 (0.) to 5 (0.5) 5 (.0) to (.0) (0) to 00 (6) Flow Velocity V m/s (ft/s) V 0.3 () 0.3 V 0 () (33) V 0.5 (0.5) 0.5 V 0 (0.5) (33) V 0.5 (0.5) 0.5 V 0 (0.5) (33) Standard ccuracy (alibration code ).0 mm/s 0.35% of Rate 0.5 mm/s 0.35% of Rate 0.5 mm/s 0.35% of Rate Flow Velocity V m/s (ft/s) gh rade ccuracy (alibration code ) V 0.5 (0.5) 0.5 mm/s 0.5 V 0.% of Rate (0.5) (3.3) 0.mm/s V 0 0.% of Rate (3.3) (33) Enhanced dual frequency excitation(option code HF): Standard accuracy mm/ s.5 mm (0. in.) to 5 mm (0.5 in.) T0.EPS % of Rate Pulse Output gh Standard grade ccuracy ccuracy V[m/s] F.EPS 5 mm (.0 in.) to 00 mm (6 in.) % of Rate Standard ccuracy Pulse 0.6 Output gh grade ccuracy ccuracy V[m/s] F5.EPS Polyurethane Rubber /Natural Soft Rubber / EPM Rubber Lining: mm (in.) 5 (.0) to 00 (6) 0 (0) to 000 (0) 00 () to 0 (0) () to 600 (0) Flow Velocity V m/s (ft/s) Standard ccuracy (alibration code ) V 0.3 (.0).0 mm/s 0.3 V 0 (.0) (33) 0.35% of Rate 6 V 0.3 (.0).75 mm/s 0.3 V (.0) (3.3) V 0 (3.3) (33) 0.5% of Rate mm/s 0.35% of Rate V 0.3 (.0). mm/s 0.3 V (.0) (3.3) 0.% of Rate mm/s V 0 (3.3) (33) 0.5% of Rate V (3.3).5 mm/s V 0 (3.3) (33) 0.5% of Rate T09.EPS Enhanced dual frequency excitation(option code HF) : Standard accuracy mm/ s 5 mm (.0 in.) to 00 mm (6 in.) % of Rate Pulse Output gh Standard grade ccuracy ccuracy V[m/s] F.EPS 0 mm (0 in.) to 000 mm (0 in.) % of Rate Pulse 0.6 Output ccuracy gh Standard grade ccuracy V[m/s] F6.EPS 00 mm ( in.) to 0 mm (0 in.) % of Rate Pulse 0.6 Output 0.5 ccuracy gh Standard grade ccuracy V[m/s] F6.EPS ll Rights Reserved. opyright 3, Yokogawa Electric orporation S 0E000E June, 000

17 mm ( in.) to 600 mm (0 in.) % of Rate..0.6 Pulse. Output ccuracy gh Standard grade ccuracy V[m/s] F63.EPS urrent Output : Pulse output accuracy plus 0.05% of Span Repeatability: 0.% of Rate (V m/s (3.3 ft/s)) 0.05% of Rate 0.5 mm/s (V < m/s (3.3 ft/s)) Maximum Power onsumption: Flowmeter: W : ombined with XF: 0W ombined with XF: W Insulation Resistance (*): Flowmeter: etween power supply terminals and ground terminalm : 00MΩ at 0V etween power supply terminals and input /output terminals : 00MΩ at 0V etween ground terminal and input/output terminals : 0MΩ at 00V etween input/output terminals : 0MΩ at 00V : etween excitation current terminal and signal / common terminals : 00MΩ at 0V etween signal terminals : 00MΩ at 0V etween signal terminals and common terminal () : 00MΩ at 0V Withstand Voltage (*): Flowmeter etween power supply terminals and ground terminal : 390V for seconds etween power supply terminals and input/output terminals : 390V for seconds (option code JF3, KF, F, and SF) etween excitation current terminal and ground terminal : 0V for minute etween signal terminals and ground terminal : 0V for minute etween signal terminals and excitation current terminal : 0V for minute (option code FF) etween signal terminals and ground terminal : 0V for minute or 600V for second etween signal terminals and excitation current terminal : 0V for minute or 00V for second. 7 TION *: When performing the Insulation Resistance Test or the Withstand Voltage Test, please obey the following caution. Following the relevant test, wait for more than 0 seconds after the power supply has been turned off before removing the cover. Remove all wires from terminals before testing. When the power terminal has a lighting protector (optional code ), remove the short bar at the ground terminal. fter testing, be sure to discharge by using a resistance and return all wires and the short bar to its correct position. Screws must be tightened to a torque of. Nm or more. fter closing the cover, the power supply can be restored. Safety Requirement Standards: EN600 ltitude at installation site: Max. 0 m above sea leve Installation category based on IE00: Overvoltage category II ( II applies to electrical equipment which is supplied from the fixed installation like distribution board.) Pollution degree based on IE00 Pollution degree ( Pollution degree describes the degree to which a solid, liquid, or gas which deteriorates dielectric strength or surface resistivity is adhering. applies to a normal indoor atmosphere.) EM onformity Standards:, EN636 lass, Table (For use in industrial locations) EN6363 EN60003 lass EN ll Rights Reserved. opyright 3, Yokogawa Electric orporation S 0E000E June, 000

18 Pressure Equipment irective: Module: H Type of Equipment: Piping Type of Fluid: Liquid and as roup of Fluid: and eneralpurpose se/submersible Type/Explosion proof Type: MOEL N (mm) (*) PS (MPa) (*) PS N (MPa mm) XF00/.5 0 XF005/ 5 0 XF00/ 0 0 XF05/W/ 5 60 XF05/W/ 5 00 XF03/W/ XF00/W/ XF0/W/ XF065/W/ XF00/W/ XF00/W/ XF5/W/ XF/W/ XF/W/ XF/W/ XF300/W/ XF3/W/ XF00/W/ Sanitary Type: MOEL N (mm) (*) PS (MPa) (*) PS (MPa mm) XF05H 5 5 XF05H 5 5 XF03H XF00H XF0H XF065H XF00H XF00H XF5H TEORY(*) rticle 3, (*3) paragraph 3 rticle 3, (*3) paragraph 3 rticle 3, (*3) paragraph 3 rticle 3, (*3) paragraph 3 rticle 3, (*3) paragraph 3 II II II II II II II II III III III II III T0.EPS TEORY (*) rticle 3, (*3) paragraph 3 rticle 3, (*3) paragraph 3 I I I I I I II Note : The sizes of 0 to 600 mm (0 to 0 in.) are not attached E marking of PE. *: PS: Maximum allowable pressure for N: Nominal size *: For details, see Table 6 covered by NNEX II of E irective on Pressure Equipment irective 97/3/E. *3: XF00/ to XF05/W/, XF05H and XF05H are outside the scope of E marking of PE. T0.EPS NORML OPERTIN ONITIONS mbient : 0 to +60 ( 0 to +0 F) *: Minimum temperature should also be limited according to minimum fluid temperature of flow tube s specification. Refer to description of Fluid and Pressure. *: Indicator s operating range (integral flowmeter): 0 to +60 ( to +0 F) *3: Maximum temperature should be + (+ F) in the case of power supply code (integral flowmeter). mbient Humidity: 0 to 00% Lengthy continuous operation at 95% or more is not recommended. Power Supply (integral flowmeter): Power supply code : specifications Rated power supply: 00 to 0 V, /60 Hz (Operating voltage range: 0 to 6 V ) specifications Rated power supply: 00 to 0 V (Operating voltage range: 90 to 30 V ) Power supply code : specifications Rated power supply: V, /60 Hz (Operating voltage range: 0. to. V ) specifications Rated power supply: V (Operating voltage range: 0. to. V ) llowable cable length m(ft) 796 (60) 600 (970) 6 (60) ( 660) Supply Voltage and able Length for Power Supply ode sable range E (V) able cross section area:.5 mm able cross section area: mm F0.EPS Fluid onductivity:.5 to 0 mm (0. to 0. in.): 5 µs/cm or larger 5 to 5 mm (0.5 to 5 in.): µs/cm or larger to 00 mm (6 to 6 in.): 3 µs/cm or larger Note: For a fluid with large flow noise (pure water, pure alcohol or others), or a fluid with low conductivity and low viscosity, the output fluctuates and is impossible to measure accurately. 0 to 600 mm (0 to 0 in.) : µs/cm or larger. ll Rights Reserved. opyright 3, Yokogawa Electric orporation S 0E000E June, 000

19 able Length and Liquid onductivity ( ):.5 to 0 mm (0. to 0. in.) m (ft) dd % of Rate to the accuracy shown in accuracy description able length able length able length 00 (330) ombined with XF (70) 3 (0) or XF converter (µs/cm) Liquid conductivity 5 to 5 mm (0.5 to 5.0 in.) m (ft) (660) m (ft) (660) 00 (330) dd % of Rate to the accuracy shown in accuracy description (70) 5 (5) 0 (0) Liquid conductivity s show in accuracy description s show in accuracy description ombined with XF converter 00 (330) ombined with XF converter 5 (5) 0 (0) (µs/cm) Liquid conductivity to 00 mm (6.0 to 6 in.) able length dd % of Rate to the accuracy shown in accuracy description s show in accuracy description ombined with XF converter ombined with XF converter 5 (µs/cm) Note: In case that size or 300 mm (0 or in.) is used for high conductivity fluid (ex. caustic soda, seawater), please use the flange type. 0 to 600 mm (0 to 0 in.) (m) 0 0 ombined with XF converter F03.EPS s show in accuracy description (µs/cm) Liquid conductivity F0.EPS 9 Measurable Flow Rate Range: SI nits (: mm, Flow rate: m 3 /h) (mm) 0 to Min. Span Flow Rate (0. m/s) 0 to Max. Span Flow Rate (0 m/s).5 0 to 0.00 m 3 /h 0 to m 3 /h 5 0 to to to to to to to to to to to to to to to.96 0 to to to to.75 0 to to. 0 to.7 0 to to to.30 0 to, to to, to to, to to 3, to 5. 0 to, to to 7, to to 0, to to 3, to to, to to, to.75 0 to,7 (mm) 0 to Min. Span Flow Rate (0.3 m/s) T.EPS 0 to Max. Span Flow Rate (0 m/s) 00 0 to,06. m 3 /h 0 to 3, m 3 /h 0 to,.5 0 to 0, to, to 5, to, to 63, to,7.5 0 to 7, to,7.3 0 to 9, to 3,393 0 to 3,097 0 to,06 0 to 36, to,6 0 to 6, to 5,735 0 to 9,3 T.EPS ll Rights Reserved. opyright 3, Yokogawa Electric orporation S 0E000E June, 000