Series 10-ZSE80/10-ISE80

Transcription

1 Series 0-ZSE80/0-ISE80 RoHS -Color Display Digital Pressure Switch For General Fluids Directional Control Valves For positive 0 80 For vacuum/ compound 80 80F N P B R T S V Rated range Symbol -X50 Clean series 0 to 0 kpa 00 to 00 kpa 0 Piping R/4 0 (M5 female thread) NPT/4 N0 (M5 female thread) G/4 F0 (M5 female thread) C0 Rc/8 URJ/4 B TSJ/4 Piping direction L (bottom ported) is not available. Specifications Lead wire length 3 m Note) Refer to page 35 for detail. Option Option Piping direction Bracket Panel mount Panel mount Front protection cover Part no. 0-ZS-4-0-ZS-4-D 0-ZS-35-0-ZS-35-C 0-ZS-35-B 0-ZS-35-F 0-ZS-35-E How to Order Rated range to MPa 80H 0. to MPa ISE 0 N ZSE 80 0 N Nil Piping direction Piping specification F (G /4) is not available. Input/Output NPN open collector output PNP open collector output NPN open collector outputs PNP open collector outputs NPN open collector outputs nalog voltage output/uto-shift switching PNP open collector outputs nalog voltage output/uto-shift switching NPN open collector outputs nalog current output/uto-shift switching PNP open collector outputs nalog current output/uto-shift switching Table Made to Order Caution This product is the 0-ZSE80/ISE80 series blown with air and double packed in a Class M3.5 (ISO Class 5) clean room. L Nil B C D Option Nil M P M M None With bracket With bracket Note) Panel mount 0-ZS-35-C 0-ZS-4- Panel mount Front protection cover 0-ZS-35-F Note) only With unit switching function Note ) Fixed SI unit Note ) Initial value psi Made to Order Refer to Table below. Option 3 Symbol Nil Y K T Operating Note) manual (Booklet) (Booklet) Calibration certificate Note ) Under the New Measurement Law, sales of switches with the unit switching function are not allowed for use in Japan. Note ) Fixed unit 0-ISE80H : MPa Others : MPa, kpa Option 0-ZS-35-0-ZS-4-D Note) ll texts in both English and Japanese 0-ZS-35-B 0-ZS-35-E 340 Fittings & Tubing Modular F. R. ir Grippers Rotary ctuators ir Cylinders ir Preparation Pressure Control Flow Control Pressure Switches/ Pressure Sensors

2 Specifications Refer to the SMC website for Pressure Switches Precautions (M-E03-3) and Specific Product Precautions (Operation Manual). Model Rated range Display/Set range Withstand Wetted parts material Display/Smallest settable increment pplicable fluid Power supply voltage Current consumption Switch output Repeatability Hysteresis nalog output uto-shift input Display Display accuracy Indicator light Environment resistance Temperature characteristics Lead wire Maximum load current Maximum load voltage Residual voltage Response time Short circuit protection Standards Cleanliness class (ISO class) Hysteresis mode Window comparator mode Output voltage Voltage (Rated range) output Linearity Output impedance Output current (Rated range) Current Linearity output impedance Enclosure Operating temperature range Operating humidity range Withstand voltage Insulation resistance 0-ZSE80 (Vacuum ) 0-ISE80 (Positive ) 0.00 to.000 MPa 0.05 to.00 MPa MPa 0.0 to 0.0 kpa 00.0 to 00.0 kpa 0.00 to.00 MPa 0.0 to. kpa 0.0 to 0.0 kpa 0.05 to. MPa 500 kpa 4 MPa Pressure sensor: Stainless steel 630, Fitting: Stainless steel MPa (to.999) 0. kpa 0. kpa 0.00 MPa 0.0 MPa (.00 to) Fluids do not corrode stainless steel 630 and 304 to ±0%, Ripple (p-p) 0% or less (with power supply polarity protection) 45 m or less NPN output, NPN outputs, PNP output, PNP outputs 80 m 8 V (at NPN output) V or less (with load current of 80 m).5 ms (with anti-chattering function:, 00, 500, 000, 00 ms) Yes ±0.% F.S. ± digit to 5 V ±.5% F.S. 0-ZSE80F (Compound ) Variable (0 or above) ±% F.S. or less pprox. kω.4 to m 3. to m 4 to m ±.5% F.S. ±.5% F.S. ±.5% F.S. ±% F.S. or less Maximum load impedance: 300 Ω (Power supply voltage V) 600 Ω (Power supply voltage 4 V) Minimum load impedance: 50 Ω Non-voltage input (Reed or Solid state), Low level: 0.4 V or less, 5 ms or longer input 3 /-digit, 7-segment, -color LCD (Red/Green) ±% F.S. ± digit (mbient temperature of 5 ±3 C) Lights up when output is turned ON. OUT, OUT: Orange IP65 Operating: 0 to 50 C, Stored: 0 to 60 C (No freezing or condensation) Operating/Stored: 35 to 85% RH (No condensation) 50 VC for minute between live parts and case MΩ or more between live parts and case (at 50 VDC Mega) ±3% F.S. (Based on 5 C, within operating temperature range) Oilproof heavy-duty vinyl cable, 3 cores (N.P) 4 cores (.B) 5 cores (R.T.S.V) CE UL/CS (E6656) RoHS Class 4 0-ISE80H (Positive ) 0.6 to 5 V ±.5% F.S. 0.8 to 5 V ±.5% F.S. ø3.5, m Conductor area: 0.5 mm (WG6) Insulator O.D.: 0.95 mm Piping Specifications Model Port size Weight () Weight () Leakage 0 R/4 7 g 89 g N0 NPT/4 F0 G/4 C0 Rc/8 URJ/4 B TSJ/4 8 g 4 g g g 90 g 86 g 86 g 9 g 83 g x 0 5 Pa m 3 /s x 0 0 Pa m 3 /s 34

3 Set Pressure Range and Rated Pressure Range Set the within the rated range. The set range is the range of that is possible in setting. The rated range is the range of that satisfies the specifications (accuracy, linearity, etc.) on the switch. lthough it is possible to set a value outside the rated range, the specifications will not be guaranteed even if the value stays within the set range. Directional Control Valves For vacuum For compound For positive nalog Output Voltage output nalog output [V] 5 Switch 0.6 B 0-ZSE80 0-ZSE80F 0-ISE80 0-ISE80H C 0 kpa kpa 0 kpa 00 kpa 0. MPa Pressure Pressure range 00 kpa 0 00 kpa MPa MPa Current output nalog output [m] 4.4 B 0 0 kpa C Range For vacuum For compound For positive Pressure 00 kpa 0 kpa Rated range 0.0 to 0.0 kpa MPa 0.05 MPa. MPa 0. MPa 0.05 MPa 0. kpa B 0 C 0.0 kpa 00.0 to 00.0 kpa 00.0 kpa 00.0 kpa 0.00 to.000 MPa 0.00 MPa MPa 0.00 to.00 MPa 0.00 MPa Note) 0.00 MPa Note) nalog output is 0.8 [V] or 3. [m] at the. MPa. MPa Rated range of switch Set range of switch ir Preparation Flow Control Pressure Control Fittings & Tubing Modular F. R. ir Grippers Rotary ctuators ir Cylinders 34 Pressure Switches/ Pressure Sensors

4 U U Internal Circuit and Wiring Example -N NPN ( outputs) -P PNP ( outputs) Main circuit Black OUT to Main circuit Black OUT to Blue DC () Blue DC () Max. 8 V, 80 m Residual voltage V or less Max. 80 m Residual voltage V or less - NPN ( outputs) -B PNP ( outputs) Main circuit Main circuit Max. 8 V, 80 m Residual voltage V or less Main circuit Black OUT White OUT Blue DC () -R, -S R: NPN ( outputs) nalog voltage output S: NPN ( outputs) nalog current output Max. 8 V, 80 m Residual voltage V or less Gray nalog output Black OUT White OUT Blue DC () -T, -V T: PNP ( outputs) nalog voltage output V: PNP ( outputs) nalog current output Gray nalog output Black OUT White OUT to to to Main circuit Max. 80 m Residual voltage V or less Main circuit Main circuit Black OUT White OUT Blue DC () -R/-S NPN ( outputs) uto-shift input Max. 8 V, 80 m Residual voltage V or less Gray uto-shift input Black OUT White OUT Blue DC () -T/-V PNP ( outputs) uto-shift input Gray uto-shift input Black OUT White OUT to to to Blue DC () Blue DC () Max. 80 m Residual voltage V or less 343 Max. 80 m Residual voltage V or less

5 Dimensions (For details about lead wires, refer to the product specifications.) 0-ZSE80/0-ISE80-0 N0 F0 C0 B (N0: 50.) 8.5 M5 x 0.8 thread depth 5 Directional Control Valves tmospheric vent port ø.6 6. ø Rc/8 -C0: Rc/ : R/4 N0: NPT/4 x M3 x 0.5 thread depth 4 When the switch is used in a place where water and dust splashes may occur, insert a tube into the atmospheric vent port, and route the other end of the tube to a safe place away from water and dust. SMC TU045 (polyurethane, O.D. ø4, I.D. ø.5) suits to the switch. Note) If it is predicted that the, such as the water hammer or surge fluctuates rapidly, refer to the Handling Precautions stated in the Operation Manual at SMC website ( G/4 -F0: G/4.7 7 M5 x 0.8 thread depth 5 Width across flats 7 Fittings & Tubing Modular F. R. ir Grippers Rotary ctuators ir Cylinders ir Preparation Pressure Control URJ/4 TSJ/4 Flow Control -: URJ/4 -B: TSJ/4 344 Pressure Switches/ Pressure Sensors

6 Dimensions (For details about lead wires, refer to the product specifications.) 0-ZSE80/0-ISE80-0L N0L C0L L BL (N0L: 6.5) x M3 x 0.5 thread depth 4 ø3.5 0L: R/4 N0L: NPT/4 8.8 tmospheric vent port ø M5 x 0.8 thread depth 5 Width across flats When the switch is used in a place where water and dust splashes may occur, insert a tube into the atmospheric vent port, and route the other end of the tube to a safe place away from water and dust. SMC TU045 (polyurethane, O.D. ø4, I.D. ø.5) suits to the switch. Note) If it is predicted that the, such as the water hammer or surge fluctuates rapidly, refer to the Handling Precautions stated in the Operation Manual at SMC website ( Rc/8 URJ/4 TSJ/4 -C0L: Rc/8 -L: URJ/4 -BL: TSJ/4 345

7 Dimensions (For details about lead wires, refer to the product specifications.) With bracket () 0-ZS-4-30 Directional Control Valves ø View With bracket () 0-ZS-4-D.6 30 With bracket () x ø Fittings & Tubing Modular F. R. ir Grippers Rotary ctuators ir Cylinders ir Preparation Pressure Control ø3.5 Flow Control Pressure Switches/ Pressure Sensors

8 Dimensions (For details about lead wires, refer to the product specifications.) Panel mount () ± x n pcs. 4 x (n pcs. ) 36± Panel thickness to 5 mm 38.6 Panel-cut dimensions 4 x R3 or less 67 or more 4 x R3 or less 347

9 Dimensions (For details about lead wires, refer to the product specifications.) Panel mount () Directional Control Valves 5. Panel-cut dimensions 36± ±0.3 Panel thickness to 5 mm x n pcs. 4 x (n pcs. ) 4 x R3 or less 4 x R3 or less Flow Control 7. ir Preparation Pressure Control Fittings & Tubing Modular F. R. ir Grippers Rotary ctuators ir Cylinders 348 Pressure Switches/ Pressure Sensors

10 Function Details uto-shift function (F4) When there are large fluctuations in the supply, the switch may fail to operate correctly. The auto-shift function compensates such supply fluctuations. It measures the at the time of auto-shift signal input and uses it as the reference to correct the set-value on the switch. Set-value correction by auto-shift function (Differential) Pressure Switch output () uto-shift input P- (P-3) H- (H-) ON OFF Hi Lo Supply normal Supply drop Rectified value Supply increase B Switch output 5 ms or more 0 ms or less response time when autoshift is input. Rectified value When the auto-shift is selected, ooo will be displayed for approximately second, and the value at that point will be saved as a rectified value C_5. Based on the saved rectified values, the set-value Note) of P_, H_, P_, and H_ will likewise be rectified. Note) When an output is reversed, n_, H_, n_, H_ will be rectified. Possible Set Range for uto-shift Input Regulating range Compound 0.0 to 0.0 kpa Vacuum 0.0 to.0 kpa 0.05 to.00 MPa Positive 0.05 to. MPa Rectified value Possible set range to kpa.0 to.0 kpa.5 to.5 MPa.3 to.3 MPa uto-shift zero The basic function of auto-shift zero is the same as the function for auto-shift. lso, it corrects values on the display, based on a value of 0, when the auto-shift is selected. B uto-preset function (F8) uto-preset function, when selected in the initial setting, calculates and stores the set-value from the measured. The optimum set-value is determined automatically by repeating vacuum and break with the target workpiece several times. Suction Verification C Precision indicator setting function (F7) Fine adjustment of the indicated value can be made within the range of ±5% of the read value. The scattering of the indicated value can be eliminated. Display value F in brackets stand for the function codes. Refer to the operating manual for how to operate and function codes in detail. High Vacuum Max. P- H- n- Min. B tmosphere ±5% R.D. Suction Work Work Released Work Work Work n Formula for Obtaining the Set-Value P_ or P_ P_ (P_) = (-B)/4 n_ (n_) = B (-B)/4 0 pplied H_ or H_ Work n H_ (H_) = (-B)/ Displayed value at the time of shipment djustable range of display calibration function Note) When the precision indicator setting function is used, the set value may change ± digit. D Peak and bottom display function This function constantly detects and updates the maximum (minimum) value and allows to hold the maximum (minimum) value. When the buttons are simultaneously pressed for second or longer, while holding, the hold value will be reset. E Key lock function This function prevents incorrect operations such as accidentally changing the set-value. F Zero-out function This function clears and resets the zero value on the display of measured. For the switch with analog output, the analog output shifts according to the indication. displayed value can be adjusted within ±0% F.S. of the when ex-factory. 349

11 Function Details G Error indication function Error name Overcurrent error Residual error pplied error uto-shift error System error Error code H nti-chattering function (F3) large bore cylinder or ejector consumes a large volume of air in operation and may experience a temporary drop in the supply. This function prevents detection of such temporary drops in the supply as an error. <Principle> This function averages values measured during the response time set by the user and then compares the average value with the set point value to output the result on the switch. Pressure Pressure range P- H- Internal data error Internal data error Internal data error Description current of switch output (OUT) exceeds 80 m. current of switch output (OUT) exceeds 80 m. It is still applied with that is ±0% over the atmospheric and the upper limit of the rated range when it is cleared to zero. fter displaying the error code for second, the switch automatically returns to the measuring mode. Due to individual product differences, the setting range varies ± digits. Supply exceeds the maximum set. Supply is below the minimum set. The value measured at the time of auto-shift input is outside the set range. fter displaying the error code for one second, the switch returns to the measuring mode. vailable response time settings ms, 00 ms, 500 ms, 000 ms, 00 ms Momentary change I Display unit switching function (F0) Display units can be switched with this function. Pressure range pplicable sensor Set range kpa MPa kgf/cm bar psi inhg For compound 0-ZSE80F 0-ZSE80 0 to 0 kpa For vacuum 0 to kpa mmhg 0-ISE80H: Does not indicate the last digit when the is.000 MPa or higher. K Secret code setting (F0) For positive 0-ISE80 0. to. MPa ISE80H 0. to. MPa J Power-saving mode (F9) OUT The numerical value disappears and the OUT decimal points blink. Power-saving mode can be selected. It shifts to the power-saving mode without button operation for 30 seconds. It is set to the normal mode (Power-saving mode is OFF.) when ex-factory. (Decimal points and operation indicator light (only when the switch output is turned ON.) blink in the power-saving mode.) OUT OUT Input an arbitrary three-digit value. The set-value can be confirmed when the key is locked. It can be set whether code number input is required or not when key is locked. It is set to input no code number when ex-factory. Directional Control Valves Fittings & Tubing Modular F. R. ir Grippers Rotary ctuators ir Cylinders ir Preparation Pressure Control Switch output operation in normal conditions ON OFF Switch output operation when ON anti-chattering function is on. OFF t (ms) t (ms) Time <veraging> <veraging> Time Time 350 Flow Control Pressure Switches/ Pressure Sensors

12 Series 0-ZSE80/0-ISE80 Made to Order Please contact SMC for detailed dimensions, specifications, and lead times. Lead wire length 3 m Symbol -X50 It has a lead wire extended to 3 meters. How to Order 0-ZSE80(F)/0-ISE80(H) Piping Output Option Refer to How to Order on page 340 for standard specifications. X50 35