Base Mounted Plug-in Unit
|
|
- Dinah Jefferson
- 5 years ago
- Views:
Transcription
1 For details about certified products conforming to international standards, visit us at Plug-in Unit SI unit COM N V V C C C6 M CM 6 B B B6 B M 000 Manifold model Plug-in unit Stations 0 station 0 C6 0 C6 The maximum number of stations differs depending on the electrical entry. Cylinder port size With ø. One-touch fitting With ø One-touch fitting With ø6 One-touch fitting M thread Mixed sizes and with port plug Top ported elbow Wtih ø. One-touch fitting Top ported elbow With ø One-touch fitting Top ported elbow With ø6 One-touch fitting M thread Bottom ported elbow With ø. One-touch fitting Bottom ported elbow With ø One-touch fitting Bottom ported elbow With ø6 One-touch fitting M thread Elbow port, mixed sizes Note ) Indicate the size in the specification sheet in the case of CM and M. Note ) Symbols for inch sizes areas follows: <For One-touch fittings> N: ø/" N: ø/" N7: ø/" NM: Mixed The top ported elbow is N and the bottom ported elbow is BN. How to Order Manifold FD SDQ designation/electrical entry/cable length (Refer to page -- for detailed information on kits.) +COM COM DeviceNet PROFIBUS-DP EX0 CC-INK AS-i CANopen DeviceNet PROFIBUS-DP Note) eave the box blank for the SI unit COM without SI unit (SD0). SI unit COM EX00 CC-INK Remote I/O EX6 CC-INK B F / P / T / / M B S Option B All stations with back pressure check valve Note ) D With DIN rail (Rail length: Standard) D With DIN rail (Rail length: Special) Note ) Special wiring specifications Note ) K (Except double wiring) N With name plate R External pilot Note ) S Direct exhaust with built-in silencer Note ) When specifying more than one option, enter symbols in alphabetical order. Example: -BRS Note ) When using the back pressure check valve for the necessary stations only, enter the back pressure check valve part no. and indicate the number of manifold stations on the specification sheet. Note ) For special DIN rail length, indicate D. (Enter the number of stations inside.) Example: -D0 In this case, stations will be mounted on a DIN rail for stations regardless of the actual number of manifold stations. The specified number of stations must be larger than the number of stations on the manifold. Indicate -D0 for the option without DIN rail. Note ) Be sure to indicate the wiring specifications on the specification sheet. Note ) For external pilot option, -R, indicate the external pilot specification R for the applicable valves as well. Note ) The built-in silencer type does not satisfy the IP67 standard. Input block COM. (Fill out for I/O unit only) PNP (+) or without SI unit/input block N NPN ( ) Input block type (Fill out for I/O unit only) Without input block M, inputs M, inputs M, inputs ( pins) Number of input blocks (Fill out for I/O unit only) 0 Without SI unit/input block Without input block With input block With input blocks VQ VQ --
2 000 How to Order Valves ight/surge voltage suppressor E Type of actuation position single position dual port valve With Without Note) Manual override : Non-locking push type (Slotted) Note) Not applicable to S kit. A Note) (R)(P)(R) position double (metal) (R) (R) (P) N.C N.C position dual port valve Coil voltage 6 B Note) (R)(P)(R) position double (rubber) (Slotted) Note) S kit is only available for VDC. (R) (R) (P) N.O N.O position dual port valve (C) Function C Note) (R)(P)(R) position closed center B: ocking type VDC Note) VDC (R) N.C (R) (P) N.O Seal type Note) For rubber seal type only. 0 Metal seal Rubber seal (R)(P)(R) position exhaust center K Note ) N R Note ) Y C: ocking type (Manual) Standard type ( W) High pressure type (.0 MPa) Negative COM External pilot ow wattage type (0. W) When specifying more than one option, enter symbols in alphabetical order. Note ) For metal seal type only. Note ) Not applicable for dual port valve. D: Slide locking type (Manual) (R)(P)(R) position pressure center (R)(P)(R) Designation/Electrical Entry/Cable ength S (Decentralized wiring type serial kit) S S (I/O serial kit) (Serial output kit) F (D-sub connector kit) Serial unit: EX0 SD0 SDY SDQ Serial unit: EX00 Note) A separate gateway unit and communication cable are required. SDN SDV SD0 Serial kit without SI unit to stations SDTA SDA Serial kit for Remote I/O (6 stations) SDTB SDA Serial kit for DeviceNet/PROFIBUS-DP/CC-INK SDTC SDTD P (Flat ribbon cable kit) 6 pins 0 pins T Serial kit without SI unit Serial kit for CANopen Serial kit for DeviceNet Serial kit for PROFIBUS-DP Serial kit for CC-INK AS-i, in/out, slave modes, power supply systems AS-i, in/out, slave modes, power supply systems AS-i, in/out, slave modes, power supply systems AS-i, in/out, slave modes, power supply systems (Terminal block box kit) (ead wire kit) FD0 FD FD FD D-sub connector kit (P) without cable D-sub connector kit (P) with. m cable to stations D-sub connector kit (P) with.0 m cable ( stations) D-sub connector kit (P) with.0 m cable M (Multiple connector kit) IP0 compliant Flat ribbon cable kit (6P) without cable Flat ribbon cable kit (6P) with. m cable to stations to 0 stations Flat ribbon cable kit (6P) with.0 m cable ( stations) TD0 Terminal block box kit (0 stations) Flat ribbon cable kit (6P) with.0 m cable PDC Flat ribbon cable kit (0P) without cable -- IP0 compliant to stations ( stations) to stations ( stations) Serial unit: EX6 to stations ( stations) to stations (6 stations) to stations ( stations) SDVB Serial kit for CC-INK Note) For a 0P flat ribbon cable, the cable assembly must be ordered separately. PD0 PD PD PD pins to stations ( stations) to 9 stations ( stations) core cable 6 pins IP67 compliant D0 ead wire kit ( core) 0.6 m lead wire MD0 Multiple connector kit (6P) without cable to stations D ead wire kit ( core). m lead wire ( stations) MD Multiple connector kit (6P) with. m cable to stations D ead wire kit ( core).0 m lead wire MD Multiple connector kit (6P) with.0 m cable ( stations) MD Multiple connector kit (6P) with.0 m cable
3 6 7 Plug-in Unit 000 Manifold Option Blanking plate assembly V00-0A- SUP block plate V00-6A Perfect block V00-FPG- Dual flow fitting assembly V00-A-C Blanking plate with connector V00-C- Connector assembly Individual SUP spacer V00-P--C6 C6 (SUP port) ø6 One-touch fitting Individual EXH spacer V00-R--C6 C6 (EXH port) ø6 One-touch fitting EXH block plate assembly D C C V000-9A-S- C6 0 M DIN rail mounting bracket [-D] V00-7A for {F,, M, P, S (EX00) kit} V000-7A-S for {S (EX0) kit} V000-7A-T for {T, S (EX6) kit} Elbow fitting assembly V00-F- Silencer (For EXH port) AN00-KM AN0-KM CY to port IP0 compliant Port plug V000-A Back pressure check valve assembly [-B] V00-A D-sub connector IP0 compliant Electrical wiring specifications [-K] Station Station Station Station Station Station 6 Station 7 Station Terminal no. SO. B 6 SO. B 7 SO. B 6 SO. B 9 COM Connector terminal no. Standard manifolds are for double wiring, but mixed wiring (single and double wiring) can be specified as options. VQ VQ Name plate [-N] Direct EXH outlet with V00-N-Stations ( to max. no. of stations) built-in silencer [-S] Exhaust port 9 Blanking plug KQP- IP0 compliant --
4 Plug-in Unit Standard Specifications Valve specifications Electrical specifications Valve Configuration Fluid Max. operating pressure 000/ Min. operating pressure Single Double position position Max. operating pressure Note ) Min. operating pressure Single Double position Proof pressure Ambient and fluid temperature ubrication Manual override Impact resistance/vibration resistance Enclosure Rated coil voltage Allowable voltage fluctuation Coil insulation type Power consumption (Current) VDC VDC Metal seal Air/Inert gas 0.7 MPa (High pressure type:.0 MPa) Note ) 0. MPa 0. MPa 0. MPa 0. MPa 0. MPa.0 MPa (0.7 MPa) 0. MPa. MPa 0 to 0 C Note ) Not required Push type/ocking type (tool required)/ocking type (Manual override) Note ) /Slide locking type Note ) 0/0 m/s Note ) Dust proof () VDC ±0% of rated voltage Equivalent to B type W DC ( ma), 0. W DC ( ma) W DC ( ma), 0. W DC ( ma) Rubber seal 0. MPa 0. MPa 0. MPa 0. MPa 0. MPa Note ) Use dry air to prevent condensation at low temperatures. Note ) Impact resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed one time each in the axial and right angle directions of the main valve and armature, for both energized and de-energized states. Vibration resistance: No malfunction occurred in a one-sweep test between and 000Hz. Test was performed in the axial and right angle directions of the main valve and armature for both energized and de-energized states. Note ) Values in ( ) are for the low wattage (0. W) specification. Note ) Metal seal type only. Note ) Only for 000/000. VQ VQ Manifold Specifications Base model Connection type Port direction Piping specifications Port size Note ), (P, R), (A, B) Note ) Applicable stations Applicable solenoid valves station weight (g) V- V- V- F : D-sub connector P : Flat cable T : Terminal block box S : Serial transmission : ead wire M : Multiple connector Side Side Side Bottom C (For ø) Options Direct outlet with built-in silencer C0 (For ø0) Options Direct outlet with built-in silencer Branch type C (for ø) P: Rc / R: Rc / Note ) One-touch fittings in inch sizes are also available. Note ) An optional specification for special wiring is available to increase the maximum number of stations. C (For ø.) C (For ø) C6 (For ø6) M (M threads) C (For ø) C6 (For ø6) C (For ø) C (For ø) C0 (For ø0) C (For ø) Rc / Rc / Rc / F,, M and P kits to stations T kit to 0 stations S kit to stations: EX00 to stations: EX0 to stations: EX6 F,, M and P kits to stations T kit to 0 stations S kit to stations: EX0, EX0 to stations: EX00 to stations: EX (Single) 79 (Double, P) 0 (Single) (Double, P) 0 S kit (without unit) Solenoid weight is not included. --
5 Manifold Option Circular connector/cable assembly (6 pins) AXT00 MC6 ead Wire ength Part no. AXT00-MC6-0 AXT00-MC6-00 AXT00-MC6-00 dimension. m m m D-sub connector/cable assembly ( pins) AXT00 DS ead Wire ength Part no. AXT00-DS-0 AXT00-DS-00 AXT00-DS-00 dimension. m m m (60) When a commercially available connector is required, use a pin female connector conforming to MI-C Plug terminal no. (arrangement as seen from lead wire q!!6 y o i u Circular Connector Cable Assembly Terminal No. Terminal no. q w e r t y u ead wire color Brown Orange Yellow Purple Yellow Orange Yellow Purple Orange Brown Dot marking Note) Terminal no.@6 is connected inside the connector. Terminal no. Socket side -M.6 x 0. D-sub Connector Cable Assembly Terminal No. Terminal no. ead wire color q w Brown e r Orange t Yellow y u i Purple o!0!! Yellow! Orange! Yellow!!6!7 @ Dot marking Circular Connector, D-sub Connector Cable Assembly Electric Characteristics Item Characteristics Conductor resistance W/km, 0 C 6 or less Withstand voltage VAC, min. 000 Insulation resistance, M/km, 0 C or less Note) The minimum inside bending radius for each cable is 0 mm. " ø0 Multi-core vinyl cable 0. mm x C --
6 Plug-in Unit V Circular multiple connectors (6 pins) made by CONINVERS -C (R) port DIN rail clamp screw M7 male screw n-c, C, C6, M <, port> C: ø. One-touch fitting C: ø One-touch fitting C6: ø6 One-touch fitting M: M thread. () () P=0.. -C (P) port Indicator light Manual override () 6 9. (.) () P=0. (.) (7.) () VQ VQ Approx. 0 (0) Mounting hole for -M Multiple connector cable assembly D-side Stations 6 7 n U-side Formulas = 0.n + (Maximum single wiring stations) = 0.n + 0 n: Stations n With signal cut block, is obtained by adding approximately 0 mm to. --9
How to Order Manifold. Manifold mounting. DIN rail mounting style Direct mounting style
Plug Lead Unit Series 000 [Option] How to Order Manifold S 0 FD D Electrical entry F kit D-sub connector kit P kit Kit type Flat ribbon cable connector kit J kit Flat ribbon cable (0P) (PC Wiring System
More informationHow to Order Manifold. Option. (1) DIN rail length specified B. (2) (3) Back pressure check valve (4)
Plug-in Unit Series SQ000 [Option] SSQ 0 0 Note) stations Note) The maximum number of stations depends on the type of electrical entries. Manifold mounting D DIN rail mounting style Note) E Direct mounting
More informationElectronic Vacuum Regulator. How to Order ITV S 5. Monitor output
Electronic Vacuum Regulator Series ITV29/29 How to Order [Option] RoHS ITV 29 2 S 5 Pressure range 9.3 to 8 kpa Power supply voltage 24 VDC to 5 VDC Note) Communication models are available only for 24
More informationSeries 10-ZSE30A(F)/10-ISE30A
Series 10-ZSEA(F)/10-ISEA RoHS 2-Color Display High-Precision Digital Pressure Switch Clean series For positive For vacuum/ compound Rated range ISEA 0.1 to 1 MPa How to Order 10 ISEA 01 N M 01 N01 C4H
More informationValve Island with Electronic I/O
Screw in Temperature /Switch with display for ON/OFF Control Indication, monitoring, transmission and ON/OFF control in one device Extra large display Menu guided parametrisation Complete communication
More informationField Network SRT Series
Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-600 032 Ph: +91 44 4353 8888 Fax: 044 4353 7888 E-mail: info@intechchennai.com Website: www.intechchennai.com Field Network SRT Series
More informationElectronic Vacuum Regulator. Standard Specifications. Model Voltage
Electronic Vacuum Regulator Series ITV9/9 Stepless control of vacuum in proportion to an electric signal Straight type Piping/Wiring Diagram (VDC, madc) Vacuum pump, Ejector ITV9 Right angle type Tank
More informationName Number of I/O points (words used) Model Antenna style. 512 outputs max. (32 words) Magnetic Base Antenna (1) --- WD30-AT001 (See note.
DeviceNet Wireless Communication WD30 The DeviceNet wireless units, consisting of a DeviceNet wireless master station and a DeviceNet wireless slave station, allow wireless communication with DeviceNet
More informationW 23-2: Focussing on what is essential and economic
Product group W - BGB Photoelectric proximity switch Energ. Photoelectric proximity switch W -: Focussing on what is essential and economic Photoelectric reflex switch The indicator LEDs on the W - offer
More informationES Series Features Detecting distance twice that of conventional
Long-distance Separate-amplifier Series Features Detecting distance twice that of conventional sensors Detecting distance easily adjustable Wide range of sensor head types available Built-in alarm output
More informationCapacitive Proximity Sensor
Capacitive Proximity Sensor Compact and Ideal for Robot Hands and Various Built-in Applications for LCD, Wafer, and PDP (Plasma Display Panel) Detection Flat head is only 5.5-mm thick. Robot Cable ensures
More informationDirectional valves Electrically operated Series 563, 565, 567. Brochure
Directional valves Electrically operated Brochure 2 Directional valves Electrically operated 3/2-directional valve, Series 563 Qn = 1350 l/min plate connection Electr. connection: Plug, Form B, industry
More informationDigital flow ELEMENT transmitter for continuous flow measurement
ELEMENT Transmitter Digital flow ELEMENT transmitter for continuous flow measurement Type can be combined with... PN10, DN15 to DN400 fluidic process connection Programmable outputs : one or two transistor
More informationOvertravel of 3.5 mm max. Power source DC D5C-1DS0 D5C-1DP0 D5C-1DA0 AC D5C-1AS0 D5C-1AP0 D5C-1AA0 Antenna only D5C-00S0 D5C-00P0 D5C-00A0
Touch Switch Unique 18 mm Capacitive Touch Switch with Choice of Three Actuators is Activated with Only a Very Slight Physical Contact Lightweight objects, such as thin wire or foil can be accurately detected.
More informationHigh Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67G environment resistance
1 High Accuracy Eddy Current Type Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1 guide... P.11~ General precautions... P.19 PHOTO PHOTO MEASURE panasonic.net/id/pidsx/global
More informationHigh-precision Optical Switch
High-precision Optical Switch Optical System Achieves 1-mm Operating Position Repeatability in this 4-way Switch A knife-edge mechanism in the optical system provides greater precision for a more stable
More informationDigital flow ELEMENT transmitter for continuous flow measurement
Digital flow ELEMENT transmitter for continuous flow measurement Type 8036 can be combined with... DN06 to DN65 fluidic process connection Programmable outputs : one or two transistor output(s) and single
More informationOperating mode. distance. 7 m Light ON Dark ON (selectable) 2 m [100 mm] (See note 1.) 100 mm (wide view)
Built-in Amplifier Photoelectric Sensor E3S-A/B Revolutionary High-performance High-quality Sensor with Built-in Amplifier can be adjusted in seconds because the optical axis coincides with the mounting
More informationHigh Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67g environment resistance
13 High Accuracy Eddy Current Type Sensor SERIES Related Information General terms and conditions... F- Glossary of terms... P.139 Sensor selection guide... P.9~ General precautions... P.1 PHOTO PHOTO
More informationDigital Input Output Module 24 V for Ex n Zone 2 Series 9472/35
www.stahl.de > 16 channels can be adjusted in pairs as digital inputs or outputs > Suitable for NAMUR proximity switches, 3-wire PNP proximity switches, contacts and solenoid valves (24 V / 0.5 A). > Up
More informationOptimising controls Vacuum switches
Vacuum switches, pneumatic Converts a vacuum level to a pneumatic signal. Vacuum-actuated membrane linked to a pneumatic switch. Available preset or with adjustable vacuum level. Unit Value Feed pressure,
More informationREMOTE SENSOR SERIES. Description
REMOTE SENSOR SERIES Telco s remote sensor series can always be depended on to do the job. Although simple in design and modest in size, nothing performs more reliably in hostile environments and challenging
More informationPD30CNB25xxPS. Photoelectrics, Background suppression reflective - PointSpot. Main features. Main functions. Description
Photoelectrics, Background suppression reflective - PointSpot Main features Miniature sensor range The visible red PointSpot light makes alignment very easy Range: 250 mm Sensitivity adjustment by potentiometer
More informationRatchet Relay. Ordering Information. Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation. G4Q-jjjj
Ratchet Relay Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation Each contact in the double-pole contact mechanism performs alternate make-brake operation at each pulse input
More informationGeneral-Purpose Photoelectric Sensor
General-Purpose Photoelectric Sensor Wide Selection of High Performance Small DC Sensors Offers Longer Sensing Distances Fast 0. msec response time for high-speed sensing Extended sensing distances up
More informationPositioning drives DC motor, brushless Absolute multiturn position detection, Profibus-DP
Features Positioning drive with worm gear bevel geared shaft Profibus-DP Brushless DC motor Absolute multiturn position detection Nominal power output 80 W inputs programmable Separate communication and
More informationPD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
More informationDetails on the New G2RS
New G2RS Series The G2RS Space-saving Power Plug-in Relay has a mechanical indicator and nameplate as standard features. A relay with a lockable test button is also available. Details on the New G2RS Overview
More informationOrdering Information. Latching Relay MMK. Available Models. Models Conforming to Auxiliary Power Relay Specifications
Latching Relay MMK CSM_MMK_DS_E_1_1 Mechanically Latching Relays Based on the MM Power Relay Low power consumption due to mechanical latch for economic operation. Relays with mixed coil specifications
More informationEnclosure rating. LED indicator with test button G2R-1-SNI G2R-2-SNI Unsealed Diode. LED indicator and diode with test button G2R-1-SNDI G2R-2-SNDI
General-purpose Relay CSM_GR-_-S_DS_E Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped
More informationph or ORP Transmitter
ph or ORP Transmitter Programmable outputs: two transistor and single or dual analog 4-20 ma (Process + Temp) Removable backlighted display Universal process connection Compatible with 120 mm ph/ ORP probes
More information40 mm Beam Pitch General Purpose Area Sensor NA40 SERIES
9 0 mm Beam Pitch General Purpose Area Sensor SERIES Related Information General terms and conditions... F- Glossary of terms / General precautions...p.59~ / P.55~ guide... P.9~ Korea s S-mark... P.60
More informationElectronically controlled proportional pressure regulating valves
Overview Description airfit control Electronically valve G1/4, G3/8, Type SRE-.. airfit control Electronically valve G3/8, G1/2, Type CRE-.. airfit control Electronically valve G3/4, G1, Type A25RE-..
More informationNEW. Automation Technology 768 series
Automation Technology 78 series Screw locking acc. to DIN EN 07--0 Degree of protection IP7 Moulded versions Easy Assembly Excellent EMC shielding (versions with shielding rings 0 ) Versions with shielding
More informationLong-distance Separate-amplifier Proximity Sensors ES Series Features Detecting distance twice that of conventional
Long-distance Separate-amplifier ES Series Features Detecting distance twice that of conventional sensors Detecting distance easily adjustable Wide range of sensor head types available Built-in alarm output
More informationLabel Sensor. Ordering Information. Application Example E3S-CD68/CD63. Ideal for Detecting Labels on Bottles. E3S-CD68/CD63 Label Sensor
Ideal for Detecting Labels on Bottles Satisfies the requirements of IP67. Ensures a vibration resistance of 10 Hz to 2 khz and a shock resistance of 1,000 m/s 2 (approximately 100G). Incorporates an NPN
More informationE2C-EDA. Proximity Sensor with Separate Amplifier Enables Easily Making Highprecision Sensitivity Settings. Ordering Information
Authorised Distributors:Intech Systems Chennai Pvt. Ltd, Chennai-00 032 Ph: +91 44 4353 Fax: 044 4353 7 E-mail: info@intechchennai.com Website: www.intechchennai.com High Precision Positioning Inductive
More informationE8EB-N0C2B E8EB-N0B2B
Slim Sensor Ideal for Workpiece Position and Original Checking The to 1 kpa model can be used for workpiece position checking. The to 1MPa model is ideal for original pressure checking. Degree of protection
More informationCZ-K Series. RGB Digital Fiberoptic Sensors. Description MAIN MENU PRODUCTS APPLICATIONS INDEX SELECTION GUIDE
RGB Digital Fiberoptic Sensors CZ-K Series Features RGB three-light source Wide detection range of 70 ±20 mm 2.75" ±0.78" High-speed response of 300 µs Water-resistant sensor head IP-67 rated Detecting
More informationSeries 10-ZSE80/10-ISE80
Series 0-ZSE80/0-ISE80 RoHS -Color Display Digital Pressure Switch For General Fluids Directional Control Valves For positive 0 80 For vacuum/ compound 80 80F N P B R T S V Rated range Symbol -X50 Clean
More informationModel Number Structure
General-purpose Relay G2RS-(S) Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped
More informationRotary Measurement Technology Incremental Encoders
-20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
More informationRemote Sensor Amplifier Terminal
9 Remote Sensor Amplifier Terminal Plug-in Sensor Amplifiers with Direct CompoBus/S Terminal Connections 1 SRT1 models support only high-speed communications systems 1 4-point terminals expand to 8 points
More informationDistance-setting Photoelectric Sensor
Distance-setting Photoelectric Sensor The Combination of the Hyper LED and Shine-proof Achieves both Ease-of-use and High Performance Hyper LED mounted. Finest pin-point beam in the industry allows detection
More informationInstallation of Fillmaster DuraBlue Melters. System on. Introduction. Instruction Sheet P/N B
Instruction Sheet P/N 1047806B Installation of Fillmaster DuraBlue Melters System on WARNING: Allow only personnel with appropriate training and experience to operate or service the equipment. The use
More informationInstallation and Operating Instructions Differential pressure transmitter for potentially explosive areas. MG-1000-EEx USAGE STRUCTURE AND DESIGN
Installation and Operating Instructions Differential pressure transmitter for potentially explosive areas Mimablad: 176GB/1999-10-25 Ersätter: MG-1000-EEx USAGE MG-1000-EEx is suitable for use in measurement
More informationStandard Sendix 5000 / 5020 (shaft / hollow shaft) Push-Pull / RS422 / Open collector. Robust performance. Many variants
ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to
More informationDENISON HYDRAULICS Proportional Pressure Control Valves
DENISON HYDRAULICS Proportional Pressure Control Valves Series 4VP01 Cetop 03 Publ. 3-EN 2200-B, replaces 3-EN 2200-A FEATURES, SYMBOLS x FEATURES Direct operated pressure relief valve for flow up-to max.
More informationNPN PNP NPN PNP NPN PNP
Cam Positioner Low-Cost, High-Performance Electronic Cam Switch for Use with OMRON E6F Rotary Encoder Control outputs can be programmed to turn ON/OFF in 1 units of rotary encoder shaft rotation Handles
More informationTL-W. Standard Flat Inductive Proximity Sensors. Ordering Information. Front and side facing surface IP67 DC 2-wire and DC 3-wire models
Standard Flat Inductive Proximity Sensors Front and side facing surface IP67 DC -wire and DC -wire models Ordering Information DC -wire Models Shape distance Model Output and operating status mm MD1 *1
More informationAbsolute Rotary Encoder
Absolute Rotary Encoder Use the Tough (Rated IP64 for Degree of Protection) Combined with a PLC or Cam Positioner for Optimum Control and Ease-of-Use Incorporates a sealed bearing, meeting IP64 for durability
More informationCatalog 200 Contactors up to 115 A Motor Starters up to 55 kw 03/2009
Catalog 00 Contactors up to 5 A Motor Starters up to 55 kw 03/009 Kraus & Naimer The development of the Blue Line rotary switch, contactor and motor starter product ranges is based on more than hundred
More informationProportional Directional Control Valves Size 6
Proportional Directional Control Valves Size 6 Direct controlled, electrically adjustable Interface to DIN 2 30 and ISO 0 PN [p max. ] = 35 bar 750055.06.02.06 Description (standard units) Design The proportional
More informationStandard valves to ISO Product range overview
Standard valves to ISO 15218 Product range overview Function Electrical connection Voltage Manual override Page/Internet Pilot valve to ISO 15218 Plug connector Plug connector type C, to EN 175301-803
More informationIP65 Splash and Dust Proof Stepping Motors
IP5 Splash and Dust Proof Stepping Motors CE/UL Model Features These IP5 rated motors* have superior water and dust resistance, and can be safely utilized in harsh or wet environments such as in food processing
More informationPhone: Fax: Web: -
ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to
More informationE2B PROXIMITY SENSORS
Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-00 0 Ph: +9 8888 Fax: 0 7888 E-mail: info@intechchennai.com Website: www.intechchennai.com EB PROIMITY SENSORS A ne w g ener ation in
More informationComponents for safety applications
Metal, turret head, types CS-A, CS-C and CS-E Double insulated, turret head, types CS-PA, CS-TA and CS-TE Presentation Metal, types CS-A, CS-C, CS-E Switches with or without locking of the actuator Pages
More informationHARAX. Contents Technical characteristics circular connector with HARAX rapid termination 50.02
Contents Page Technical characteristics circular connector with rapid termination 50.02 Circular connector M8/M12 with rapid termination... 50.05 Han M12 panel feed-through... 50.08 Han M12 pcb adapter...
More informationJARVIS. Model25CL-4,5,6 Hock Cutter and Loin Dropper. 25CL--5 Front Legs and Horns. 25CL--4 Hind Legs and Horns. 25CL--6 Loins
Model25CL-4,5,6 Hock Cutter and Loin Dropper 25CL--4 Hind Legs and Horns 25CL--5 Front Legs and Horns 25CL--6 Loins EQUIPMENT SELECTION... Ordering No. TABLE OF CONTENTS... Page 25CL--4... 4025007 25CL--5...
More informationGlass-fibre-reinforced polycarbonate. Dead zone Adaptive or fixed from % 20 ms. 60 ms. 60 ms. Approx. 1.3 kg. Approx. 0.9 kg. Approx. 5.
General data Mounting On linear actuators On quarter turn actuators ARCA-integrated or to VDI/VDE 3847-1 or IEC 534-6 (NAMUR) Range of stroke: 3... 130 mm Integrated to VDI/VDE 3847-2 or VDI/VDE 3845 Angle
More informationConectores Circulares 7/8
Conectores Circulares 7/8 SUMinistros industriales MP4 S.L. TEL. +34 93 590 94 77 c/adrià Gual, 10 local 2 08173 Sant Cugat del Vallès Barcelona (Spain) www.suministros-industriales.es e-mail: mp4@suministros-industriales.es
More informationFA Wireless SS Terminals
FA Wireless SS Terminals WT30 Construct a Wireless System for ON/OFF Data Collection That Is Ideal for Monitoring Production Site Equipment Wireless Slave Station equipped with I/O. Height of 90 mm and
More informationGlass-fibre-reinforced polycarbonate. Dead zone Adaptive or fixed from % 1.5 s adjustable. 20 ms. 60 ms. 60 ms. Approx. 1.
General data Mounting On linear actuators On quarter turn actuators ARCA-integrated or to VDI/VDE 3847-1 or IEC 534-6 (NAMUR) Range of stroke: 3... 130 mm Integrated to VDI/VDE 3847-2 or VDI/VDE 3845 Angle
More informationOPERATION MANUAL. Input Block EX250-IE1 EX250-IE2 EX250-IE3
No.EX## - OME000 - A OPEATION MANUAL Input Block EX0-IE EX0-IE EX0-IE SMC Corporation Contents.Precautions ------------------------------------------ P.Specifications - General specification ------------------------------------------
More informationModel Number Structure. Ordering Information. Solid-state Power OFF-delay Timer H3DE-H. Model Number Legend. List of Models
Solid-state Power OFF-delay Timer H3DE-H Timers Two delay-time models available. 0.1 to 12 seconds (S Series) 1 to 120 seconds (L Series) Covers wide range of supply voltage. Model Number Structure Model
More informationSensing method Through-beam Retroreflective Diffuse reflective Convergent-beam Appearance Side-view Flat Side-view Flat Side-view
R Subminiature Photoelectric Sensor Omron s Next Generation of Sub-miniature Photoelectric Sensors H Utilizes Omron s Hyper LED technology to achieve the industry s smallest visible red beam H Self-contained
More informationE3S-CR62/67. Ideal for detecting transparent glass and plastic containers. Transparent bottle sensor. Features
bottle sensor Ideal for detecting transparent glass and plastic containers Features Stable operation even if container interval is shortened for higher productivity. Stable detection of 5 mm gaps that
More informationSensing method Through-beam Retroreflective Diffuse reflective Convergent-beam Appearance Side-view Flat Side-view Flat Side-view
R Subminiature Photoelectric Sensor Omron s Next Generation of Sub-miniature Photoelectric Sensors H Utilizes Omron s Hyper LED technology to achieve the industry s smallest visible red beam H Self-contained
More informationXXXX e. X d.. X X X a
The Heavy uty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
More informationP/N B ProBlue and DuraBlue Thermostat Service Kit - P/N
P/N 1029717B ProBlue and DuraBlue Thermostat Service Kit - P/N 1028321 This instruction sheet provides separate instructions for replacing a thermostat on ProBlue and a DuraBlue adhesive melters. Tools:
More informationFX-CM. HQ Color Mark Sensor. Model Number Legend SALIENT FEATURES. Sensors. Proximity. Photoelectric. Sensors
HQ Color Mark Sensor SALIENT FEATURES 18mm ±2mm Pushbutton Teach RGB LED light source 8 Remote Memory Setting Shock Resistant casing - 50G Model Number Legend 1 2 3 4 5 1. Series 4. Output FX 2. Type CM:
More informationWASP Extended Shuttle Fitting. Process Overview
Process Overview Tools needed; metric Hex key set Remove Wasp Plate sealer from all power and pneumatic supplies; situate the unit on a clear work area for access. Ensure the Wasp plate sealer has cooled
More informationLENORD. PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with little space. +BAUER... automates motion.
PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with little space LENORD +BAUER... automates motion. Technical information Version 2017-07 General The PowerDRIVE-Positioning
More informationDistance-setting Photoelectric Sensor
Distance-setting Photoelectric Sensor The Combination of the Hyper LED and Shine-proof Achieves both Ease-of-use andhighperformance Hyper LED mounted. Finest pin-point beam in the industry allows detection
More information6mm Interface Relays RV8 Series
6mm Interface Relays RV8 Series PRODUCT DESCRIPTION Electromechanical C1D2 (screw terminal) Solid State (spring clamp) IDEC 6mm interface relays provide a compact solution for general purpose relay requirements.
More informationCorrection Reissue. Product Discontinuation Notices
PRODUCT NEWS Correction Reissue Product Discontinuation Notices January 6, 2014 Pressure Sensors No. 2011265E(2) Discontinuation Notice of Pressure Sensor (Stainless diaphragm) E8AA series (Special product),
More informationMEGA - AS-Interface version 3.0
NEUMATIC SOOL VALVE ISLANDS by field bus with the following protocol MEGA - AS-Interface version. Installation manual NTERFACE MS-7-6.R GB CONTENTS age. The BUSLINK MEGA system with the AS-Interface protocol.
More informationProportional pressure controller
Proportional pressure controller Introduction I. Introducing : Proportional Pressure Controller Input signal I or E Output pressure The MAC Proportional Pressure Controller, (PPC) is an innovative product
More information10 to 30 VDC (10% max. permissable ripple peak-to-peak)
R Background Suppression Sensor Photoelectric Sensor With Adjustable Setting Distance in Rugged Metal Housing H Stable detection regardless of material color or size of sensing object: 2% or less black/white
More information6th digit. 5th digit. 4th digit. Code Specifications 3 20-bit absolute (standard) D 20-bit incremental (standard) Design Revision Order
Rotary s Model Designations - 3 D Series st+nd digits 3rd digit th digit th digit th digit 7th digit st+nd digits Rated Output th digit Serial Encoder 7th digit Options Code 3 3 W W 9 8 W 3.3 kw.8 kw 3.9
More information2-JAW SELF-CENTERING RADIAL PNEUMATIC GRIPPER (SERIES PS)
PS 2-JAW SELF-CENTERING RADIAL PNEUMATIC GRIPPER (SERIES PS) Double-acting radial motion. The gripping force is constant throughout the entire stroke (from 0 to 90, both opening and closing). Lightweight:
More informationIncremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536, programmable
More informationRemote Sensor Amplifier Terminal
9 Remote Sensor Amplifier Terminal Plug-in Sensor Amplifiers with Direct CompoBus/S Terminal Connections 1 SRT1 models support only high-speed communications systems 1 4-point terminals expand to 8 points
More informationE2Q5. Square Proximity Sensor. Long Distance Square Inductive Proximity Sensor. Ordering Information
ASH & ALAIN INDIA PVT LTD S-00, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-0020(India) Tel : 0-4797575 Fax : 0-4797574 E-mail : sales@ashalain.com Long Distance Square Inductive Square M2 Plug-in
More informationSerial Transmission Type (Integrated)
TypeS Series SX000/000 Base Mounted Manifold Stacking Type IN Rail Mounted Serial Transmission Type (Integrated) How to Order Manifold SSX S A 0 U 0 Series SX000 SX000 Symbol Specifications O Without A
More informationTRD-N/NH Series Incremental Encoders
/N Series Encoders TRD-K TRD-K A TRD-GK TRD-J /N TRD-2E TRD-S/S Features Shaft and ollow Shaft type are available. Compact body with 5mm diameter and 35mm depth. Wide range of resolution from 1 to 2,5P/R.
More informationPhotoelectric Switches for Harsh Environments
Photoelectric Switches for Harsh Environments HP8 Series For even harsher environments Die-cast housing for strength and shock resistance High-performance seal Resistance to the most advanced cutting oils
More informationIncremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size ø58 mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536,
More informationTemposonics. Magnetostrictive Linear Position Sensors. GB-M / GB-T SSI Data Sheet
Temposonics Magnetostrictive Linear Position Sensors GB-M / GB-T SSI Sensor element and electronics can be changed Flat & compact sensor electronics housing Electrical connection is freely rotatable MEASURING
More informationMK-S (New Models) General-purpose Relays. New Super MK Relays. Models with Latching Lever Added to the Series. Features. Model Number Structure
General-purpose Relays MK-S (New Models) CSM_MK-S_DS_E 1 New Super MK Relays. Latching Lever Added to the Series. Same mounting and internal wiring as the previous Super MK Relays Built-in mechanical indicator
More informationPosiflow Proportional Solenoid Valves % ^ ) 2/2. Brass or Stainless Steel Bodies 1/8" to 1/2" NPT. Proportional Valves. Features.
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/8" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Control achieved by applying straight voltage between 0 and 24 VDC
More informationConductivity Transmitter
Conductivity Transmitter Programmable outputs: two transistor and single or dual analog 4-20 ma Removable backlighted display Universal process connection Type can be combined with... Three cell constants
More informationFAS 10 mm PICOSOL Direct acting solenoid valve
FS 0 mm PICOSOL > > /, /; Manifold mounting > > Long life 00 million cycles > > Compact Design > > Low power consumption Technical features Medium: ir, oxygen, neutral gases (0 %... 9 % humidity, non condensing),
More informationProportional pressure controller
Proportional pressure controller Introduction I. Introducing : Proportional Pressure Controller Input signal I or E Output pressure The MAC Proportional Pressure Controller, (PPC) is an innovative product
More informationAmphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics
Amphenol C 1-1 / C 1- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics C 1-1 Overview No. of contacts + PE + PE Termination screw solder Wire gauge Rated insulation voltage Current carrying
More informationProducts catalogue (I-P Edition)
Products catalogue (I-P Edition) Products catalogue (I-P Edition) FROM QUALITY OUR NATURAL DEVELOPMENT Active in the industry of Refrigeration and Air Conditioning for fifty-five years, Castel is well-established
More informationRelays & Sockets RU Series Universal Relays. With Latching or Momentary Lever. Standard (without lever) Key features:
RU Series Universal Relays Key features: Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator
More informationXXXX e. X d.. X X X a
The Heavy Duty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
More informationRM75. Miniature Mini IP 50 RING LIGHT LOW-ANGLE MULTI-DRIVE TM PRODUCT HIGHLIGHTS 5-PIN M12. RoHS YEAR. smartvisionlights.com. Compliant CE.
RM75 Miniature Mini RING LIGHT LOW-ANGLE MULTI-DRIVE TM P R O D U C T D A T A S H E E T Cable Length: 15.2 cm (6 ) Four T-slots for Mounting Aluminum Housing Optional Camera Adapter High Intensity LEDs
More information