General Specifications

Transcription

1 eneral Specifications S 0R0000EE XF Magnetic The XF magnetic flowmeter series are sophisticated products with outstanding reliability and ease of operation, developed on the basis of decades of fieldproven experience. The combination of replaceable electrodes and a diagnostic function to detect adhesion level on the electrodes improves dramatically maintenance intervalls. The XF employs the fluid noise free ual Frequency Excitation Method (for sizes up to 00 mm (6 in.)) and the newly added Enhanced ual Frequency Excitation Method as an option for more difficult applications to ensure greater stability and quicker response. ote: The ual Frequency Excitation Method is Yokogawa s unique technology. Fieldbus communication type is also available. FETURES Refer to S 0E0F00E for FOUTIO TM Fieldbus communication type and S 0E0F0E for PROFIUS P communication type marked with Useroriented Functionality Fluid dhesion Level iagnosis y constantly monitoring the level of insulating substance on the electrodes, it is possible to determine when maintenance is required. With the utilization of an optional replaceable electrode, the electrodes can be easily removed from the flowmeter and cleaned. Flexible Electrical onnection irection The converter or the terminal box can be rotated arbitrarily to change the directions of electrical connection on the site. lear and Versatile Indications The L indicator employs a large, backlit full dotmatrix, that can facilitate various displays. One to three lines are available. When there is an alarm condition, a full description of the countermeasure is indicated. Easy Setup Parameters The most frequently used parameters are arranged in a group at the top. The infrared switches enable the users to set parameters without opening the cover. Expansion of Product Lineup Improved ccuracy Specification The standard accuracy is 0.35% of reading. lso available is an optional high accuracy calibration rated at 0.% of reading. Extra Small Flange Type The flange type is now available from a.5 mm size. Various Sanitary onnections variety of sanitary connections are available, such as Trilamp, ISO, I and SMS. Enhanced Performance and Specifications Excitation Mode Selection The Enhanced ual Frequency Excitation Method can be optionally selected. For difficult applications such as for high concentration slurries or low conductivity fluid, extremely stable measurements can be realized. onductivity Limits 5 mm to 5 mm (0.5 to 5.0 in) : µs/cm mm to 00 mm (6 to 6 in) : > 3 µs/cm,5 mm to 0 mm (0. to 0. in) : 5 µs/cm ghspeed Pulse Output The pulse rate now goes up to 0,000 pps (pulse/ second) for use with high speed applications such as in short time batch processes. Versatile Input/Output Function for ontents Features P. Standard Specifications P. Hazardous rea lassification P. Standard Performance P. ormal Operating onditions P. 6 autions for Installation P. 0 ccessories P. 0 Terminal onfiguration, Terminal Wiring P. Model and Suffix ode P. Optional Specifications for s P. 3 External imensions P. 35 Sizing ata P. Ordering Informatiom P. 5 Rota Yokogawa mbh & o. K Rheinstr Wehr ermany S 0R0000EE opyright September 003 (Rü) 6th edition October 03 (Rü)

2 STR SPEIFITIOS onverter ( ) The contents of (*) and (*) described in the converter specifications are follows. *: Select two points from: one pulse output, one alarm output, one status input, or two status outputs. *: For models without an indicator, the configuration tool (such as HHT (handheld terminal) or FieldMate TM, etc) is necessary to set parameters. Excitation Method: Standard dual frequency excitation:.5 to 00 mm (0. to 6 in) Enhanced dual frequency excitation: 5 to 00 mm (.0 to 8.0 in) (for optional code /HF or /HF) Input Signal: One Status Input: ry contact Load Resistance: 00 Ω or less (O), 00 k Ω or more (OFF). Output Signals: (*) One urrent Output: to 0 m (load resistance: 7 W maximum, including cable resistance) One Pulse Output (*) Transistor contact output (open collector) : ontact capacity : 30 V (OFF), 00 m (O) Output rate to 0,000 pps (pulse/second) One larm Output (*) Transistor contact output (open collector) : ontact capacity : 30 V (OFF), 00 m (O) Two Status Outputs (*) Transistor contact output (open collector) : ontact capacity : 30 V (OFF), 00 m (O) ommunication Signals: RI or HRT communication signal (Superimposed on the to 0 m signal) istance from Power Line: 5 cm (6 in) or more (Parallel wiring should be avoided.) RI: ommunication istance: Up to.5 km (0.93 miles), when polyethylene insulated PVsheathed cables (EV cables) are used. ommunication distance varies depending on the type of cable and wiring used. Load Resistance to Ω (including cable resistance) Load apacitance: 0. µf or less Load Inductance: 3.3 mh or less Input Impedance of ommunicating evice: 0 kω or more (at, khz) HRT: Load Resistance: to 600 Ω (including cable resistance) ote: HRT is a registered trademark of the HRT ommunication Foundation. ata Security uring Power Failure: ata (parameters, totalizer value, etc.) storage by EEPROM. o backup battery required. Indicator: (*) Full dotmatrix L (3x3 pixels) Lightning Protector: The lightning protector is built into the current output and pulse/alarm/status input and output terminals. When option code / is selected, the lightning protector is built into the power terminals. Protection: eneralpurpose / Sanitary type / Flame proof type : IP66, IP67 Explosion proof type refer to description of Enclosure in Hazardous rea lassification. oating: ase and over: corrosionresistant coating oating olor: Mint green coating (Munsell /.9 or its equivalent) onverter Material: ase and over : luminum alloy Mounting/Shapes (integral ): Electrical onnection: SI / PT female ISO M0 x.5 female irection of electrical connection: The direction can be changed even after delivery. Terminal onnections: M size screw terminal rounding: rounding resistance 00 Ω or less When optional code / is selected, grounding resistance 0 Ω or less shall be applied. In case of explosion proof type follow the domestic electrical requirements as regulated in each country. In case of flame proof type refer to description of HZROUS RE LSSIFITIO. Functions How to Set Parameters: (*) The indicator s L and three infrared switches enable users to set parameters without opening the case cover. Parameters can also be set with the configuration tool (Such as HHT (handheld terminal) or FieldMate, etc.). The language for the HHT is English only. isplayed Languages: (*) Users can choose a language from among English, French, erman, Italian, Japanese or Spanish. Instantaneous Flow Rate/Totalized Value isplay Functions (for models with an indicator) (*): The full dotmatrix L enables user selections of displays from one line to three lines for: Instantaneous flow rate Instantaneous flow rate (%) Instantaneous flow rate (bar graph) urrent output value (m) Totalized forwarddirection flow rate Totalized reversedirection flow rate Totalized differential flow rate Tag o. Results of electrode adhesion diagnostics ommunication type S 0R0000EE 6th edition, September 5, 0300 ll Rights Reserved. opyright 003, Rota Yokogawa

3 3 Totalizer isplay Function: (*) The flow rate is counted one pulse at a time according to the setting of totalization pulse weights. For forward and reverse flow measurement functions, the totalized values of the flow direction (forward or reverse) and the flow direction are displayed on the indicator together with the units. The difference of totalized values between the forward and reverse flow rate can be displayed. Totalization for the reverse flow rate is carried out only when Forward and reverse flow measurement functions is selected. amping Time onstant: (*) Time constant can be set from 0. second to 00.0 seconds (63% response). The default is 3 seconds. Span Setting Function: (*) Span flows can be programmed in units such as volume flow rate, mass flow rate, time, or flow rate value. The velocity unit can also be set. (*) Volume Flow Rate Unit: kcf, cf, mcf, Mgal (US), kgal (US), gal (US), mgal (US), kbbl (US)*, bbl (US)*, mbbl (US)*, µbbl (US)*, Ml (Megaliter), m 3, kl (kiloliter), l (liter), cm 3 Mass Flow Rate Unit (ensity must be set.): lb (US), klb (US), t (ton), kg, g Velocity Unit: ft, m (meter) Time Unit: s (sec), min, h (hour), d (day) * US oil or US beer can be selected. Pulse Output: (*) (*) Scaled pulse can be output by setting a pulse weight Pulse Width: uty % or fixed pulse width (0.05, 0., 0.5,, 0, 33,, 00 ms) can be selected arbitrarily. Output Rate: to 0,000 pps (pulse/second) Multirange Function (*)(*): Range switching via status input Status input enables the switching of up to two ranges. utomatic range switching When the flow rate exceeds 00 % of the range, transition to the next range (up to four ranges) is carried out automatically. Range swiching can be confirmed by status outputs and indicator. Forward and Reverse Flow Measurement Functions (*)(*): Flows in both forward and reverse directions can be measured. The reverse flow measurement can be confirmed by status output and indicator. Totalization Switch (*)(*): The status output is carried out when a totalized value becomes equal to or greater than the set value. Preset Totalization: (*) The parameter setting or status input enables the totalized value to be preset to a setting value or zero. 0 % Signal Lock: (*)(*) Status input forcibly fixes the instantaneous flow rate display, current output, pulse output, and flow rate totalization to 0%. larm Selection Function: (*) larms are classified into the System larms (hard failures), Process larms (such as Empty Pipe, Signal Overflow and dhesion larm ), Setting larms and Warnings. Whether alarms should be generated or not can be selected for each item. The current output generated for an alarm can be selected from among. m or less, fixed to m,.6 m or more, or HOL. larm Output: (*)(*) larms are generated only for the items selected via the larm Selection Function if relevant failures occur. Self iagnostic Functions: (*) If alarms are generated, details of the System larms, Process larms, Setting larms and Warnings are displayed together with concrete descriptions of countermeasures. Flow Upper/Lower Limit larms: (*)(*) If a flow rate becomes greater or smaller than the set value, this alarm is generated. In addition, two upper limits (H, HH) and two lower limits (L, LL) can be set. If a flow rate becomes greater or smaller than any of the set values, the status is output. Electrode dhesion iagnostics Function: (*)(*) This function enables monitoring of the adhesion level of insulating substances to the electrodes. epending on the status of adhesion, users are notified by a warning or an alarm via status outputs. If replaceable electrodes are used, they can be removed and cleaned if adhesion occurs. ll Rights Reserved. opyright 003, Rota Yokogawa S 0R0000EE 6th edition, September 5, 0300

4 s ( / flowmeter) of XF flowtubes: XF standard (Lay length code ) Use Process onnection Lining eneralpurpose Use Wafer Flange PF Polyurethane Rubber atural Soft Rubber EPM Rubber eramics (*) PF Polyurethane Rubber atural Soft Rubber EPM Rubber.5 (0.), 5 (0.), 0 (0.), 5 (0.5), 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 () 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 () (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 () (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 () 5 (0.5), 5 (.0), 0 (.5), (.0), 80 (3.0), 00 (.0), (6.0), 00 (8.0).5 (0.), 5 (0.), 0 (0.), 5 (0.5), 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 (), 3 (), 00 (6) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 (), 3 (), 00 (6), 0(0), 600 (), 0 (8), 800 (3), 900(36), 000(0), 00(), 00(8), 3(5), 0(60), 600(6), 800(7), 000(80), 00(88), 00(96),600(0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 (), 3 (), 00 (6), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 (), 3(), 00(6) (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 (), 3(), 00(6) gh rade ccuracy 0.% of Rate (*3) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) 5 (.0), 0 (.5), (.0), 80 (3.0), 00 (.0), (6.0), 00 (8.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) Enhanced ual Frequency Excitation (Optional code HF,HF) (*3) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) Replaceable Electrode (Electrode structure code ) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 () 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 () 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 (), 3 (), 00 (6) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 (), 3 (), 00 (6) Union Joint eramics (*).5 (0.), 5 (0.), 0 (0.) 5 (.0), 0 (.5), (.0), 80 (3.0), 00 (.0), (6.0), 00 (8.0) (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) Unit: mm (in.) Lay Length to ISO 3359 Flanged flowtubes styles, sizes 5 mm to 00 mm (0.5 to 6 in), have lay length according to ISO S 0R0000EE 6th edition, September 5, 0300 ll Rights Reserved. opyright 003, Rota Yokogawa

5 5 of XF flowtubes: XF standard (Lay length code ) (continued) Use Process onnection Lining Submersible Type Explosion proof Type Sanitary Type Wafer Flange Wafer Flange lamp: Trilamp (*), I3676 ISO85/SMS306 Union: I85 ISO853 (*5) SMS5 (*6) utt Weld: I8, ISO03 PF Polyurethane Rubber atural Soft Rubber EPM Rubber PF Polyurethane Rubber atural Soft Rubber EPM Rubber PF eramics (*) PF PF 5 (0.5), 5 (.0), 3 (.5), 0 (.5) (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 () 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 () (.0), 65 (.5),80 (3.0), 00 (.0),5 (5.0), (6.0), 00 (8.0), (0), 300 () (.0), 65 (.5),80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 () 5 (0.5), 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 (), 3 (), 00 (6) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 (), 3 (), 00 (6), 0(0), 600 (), 0 (8), 800 (3), 900(36), 000(0), 00(), 00(8), 3(5), 0(60), 600(6), 800(7), 000(80), 00(88), 00(96),600(0) (.0), 65 (.5), 80(3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 (), 3 (), 00 (6) (.0), 65 (.5), 80(3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 (), 3 (), 00 (6).5 (0.), 5 (0.), 0 (0.), 5 (0.5), 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 () 5 (0.5), 5 (.0), 0 (.5), (.0), 80 (3.0), 00 (.0), (6.0), 00 (8.0).5 (0.), 5 (0.), 0 (0.), 5 (0.5), 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0), (0), 300 (), 3 (), 00 (6) 5 (0.5), 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) gh rade ccuracy 0.% of Rate (*3) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) 5 (.0), 0 (.5), 5(.0),0(.5),(.0), (.0), 80 (3.0), 80(3.0),00(.0), 00 (.0), (6.0), (6.0),00(8.0) 00 (8.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) Union Joint eramics (*).5 (0.), 5 (0.), 0 (0.) Enhanced ual Frequency Excitation (Optional code HF,HF) (*3) (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0), (6.0), 00 (8.0) 5 (.0), 3 (.5), 0 (.5), (.0), 65 (.5), 80 (3.0), 00 (.0), 5 (5.0) Unit: mm (in.) Replaceable Electrode (Electrode structure code ) *: XF standard lay length dimensions for wafer type ceramics linings are the same as those for M ceramics linings. *: XF standard lay length dimensions for union joint type ceramics linings are the same as those for M ceramics linings. *3: Enhanced dual frequency excitation is not available for models with gh grade accuracy. *: ot available with 3 mm (.5 in.), 5 mm (5.0 in.) *5: ot available with 5 mm (5.0 in.) *6: ot available with 5 mm (0.5 in.), 5 mm (5.0 in.) T.EPS ll Rights Reserved. opyright 003, Rota Yokogawa S 0R0000EE 6th edition, September 5, 0300

6 6 of XF s: Replacement model for earlier M or M E (Lay length code ) Use eneral purpose use Submersible Type Explosion proof Type Process onnection Wafer (*6) Flange (*7) Wafer (*6) Flange (*7) Wafer (*6) Flange (*7) Lining gh rade ccuracy 0.% of Rate PF Polyurethane rubber.5 (0.), 5 (0.), 0 (0.), 5 (0.5), 5 (.0), 0 (.5), 0 (.0), 80 (3.0), 00 (.0), (6.0), 00 (8.0) 5 (.0), 0 (.5), 0 (.0), 80 (3.0), 00 (.0), (6.0), 00 (8.0) Enhanved ual Frequency Excitation (Option /HF, /HF) 5 (.0), 0 (.5), 0 (.0), 80 (3.0), 00 (.0), (6.0), 00 (8.0) 5 (.0), 0 (.5), 0 (.0), 80 (3.0), 00 (.0), (6.0), 00 (8.0) PF (6.0), 00 (8.0), (0) (6.0), 00 (8.0) Polyurethane rubber PF Polyurethane rubber PF Polyurethane rubber PF Polyurethane rubber (6.0), 00 (8.0), (0) (6.0), 00 (8.0) 5 (0.5), 5 (.0), 0 (.5), 0 (.0), 80 (3.0), 00 (.0), (6.0), 00 (8.0) 5 (.0), 0 (.5), 0 (.0), 80 (3.0), 00 (.0), (6.0), 00 (8.0) (6.0), 00 (8.0), (0) (6.0), 00 (8.0), (0).5 (0.), 5 (0.), 0 (0.), 5 (0.5), 5 (.0), 0 (.5), 0 (.0), 80 (3.0), 00 (.0), (6.0), 00 (8.0) 5 (.0), 0 (.5), 0 (.0), 80 (3.0), 00 (.0), (6.0), 00 (8.0) 5 (.0), 0 (.5), 0 (.0), 80 (3.0), 00 (.0), (6.0), 00 (8.0) Unit: mm (in.) Replacable Electrode Structure (Electrode structure code ) (6.0), 00 (8.0), (0) (6.0), 00 (8.0), (0) (6.0), 00 (8.0) (6.0), 00 (8.0) 5 (.0), 0 (.5), 0 (.0), 80 (3.0), 00 (.0), (6.0), 00 (8.0) (6.0), 00 (8.0), (0) (6.0), 00 (8.0) *6: M lay length dimensions for wafer type of mm (0 in.), and 300 mm ( in.) are the same as those for XF Standard. nd, in case of platinumiridium (grounding ring code P) or tantalum (grounding ring code T) or one (grounding ring code ) in wafer type of.5 mm (0. in.) to 5 mm (0.5 in.), the lay lengths of Replacement model are the same as those for XF Standard. *7: M lay length dimensions for flange type of 5 mm (0.5 in.) to 00 mm (.0 in.), or 300 mm ( in.) to 00 mm (6 in.) are the same as those for XF Standard. However, in case of platinumiridium (grounding ring code P) or tantalum (grounding ring code T) or one (grounding ring code ) in flange type of 5 mm (0.5 in.) to 00 mm (.0 in.), the lay length of XF Standard are longer by approx. mm (0.6 in) than those of earlier M or M E. Protection: eneralpurpose Use/Sanitary Type: IP66, IP67 Explosion proof type: In case of explosion proof type, refer to description of Enclosure in HZROUS RE LSSIFITIO. Submersible Type (only for ): IP68 (onforms to continuous immersion under the following test condition) Test ondition: m below the surface of the water, equivalent to 0.5 MPa hydraulic pressure, for one month. able should be protected at customer site. oating: eneralpurpose Use/Explosion proof Type:.5 to 5 mm (0. to 5.0 in.) (Wafer type),.5 to 5 mm (0. to 5.0 in.) (Process connection code or of flange type): Housing: o coating (Stainless steel surface) Flange (Flange type only) : o coating (Stainless steel surface) Terminal ox and over ( ): orrosionresistant coating oating color; Mint green (Munsell /.9 or its equivalent) to 300 mm (6.0 to in.) (Wafer type), to 00 mm (6.0 to 6 in.) (Process connection code of flange type), to 00 mm (.0 to 6 in.) (Process connection code of flange type): Housing, Flange (Flange type only), Terminal ox and over ( ): orrosionresistant coating oating color: Mint green (Munsell /.9 or its equivalent) Sanitary Type: 5 to 5 mm (0.5 to 5.0 in.): Housing: o coating (Stainless steel surface) dapter : o coating (Stainless steel surface) Terminal ox and over ( ): orrosionresistant coating oating color; Mint green (Munsell /.9 or its equivalent) Submersible Type: ontar epoxy coating (black) S 0R0000EE 6th edition, September 5, 0300 ll Rights Reserved. opyright 003, Rota Yokogawa

7 7 Material.5 mm (0. in) to 5 mm (0.5 in) Mini Flange Pipe 5 mm ( in) to 5 mm (5 in) Flange Mini Flange Pipe Part ame Housing Process onnection code: ** Process onnection code: ** [( mm (.0 in.) to 5 mm (5.0 in.)] Wafer Type PF/Polyurethane Rubber/ atural Soft Rubber/ EPM Rubber lining Wafer Type eramics lining Sanitary Type Wafer Type PF/Polyurethane Rubber/ atural Soft Rubber/ EPM Rubber lining Flange Type PF/Polyurethane Rubber/ atural Soft Rubber/ EPM Rubber lining Wafer Type eramics lining Sanitary Type Part ame Housing Flange Wafer Type PF/Polyurethane Rubber lining Wafer Type eramics lining[only for 5 mm (0.5 in.)] Sanitary Type [only for 5 mm (0.5 in.)] Wafer Type PF/Polyurethane Rubber lining Wafer Type/UnionJoint eramics lining Flange Type PF lining Sanitary Type [only for 5 mm (0.5 in.)] Terminal ox ( ) Terminal ox ( ) 5 mm (.0 in.) (Lay Length code ) 5 mm (.0 in.) (Lay Length code ) 3 mm (.5 in.) to 5 mm (5.0 in.) 5 mm (.0 in.) to mm (.0 in.) 80 mm (3.0 in.), 00 mm (.0 in.) 5 mm (.0 in.) 3 mm (.5 in.) to 5 mm (5.0 in.) 5 mm (.0 in.) (Lay Length code ) 5 mm (.0 in.) (Lay Length code ) 3 mm (.5 in.) to 5 mm (5.0 in.) 5 mm (.0 in.) 3 mm (.5 in.) to 5 mm (5.0 in.) 5 mm (.0 in.) to 00 mm (.0 in.) 5 mm (.0 in.) 3 mm (.5 in.) to 5 mm (5.0 in.) Material Stainless steeljis SS equivalent Stainless steeljis SUS30 or SUSF30(ISI 30 SS /E.30 equivalent) Stainless steeljis SS3 (E.308 equivalent) Stainless steeljis SUS36L (ISI 36 SS /E.0equivalent) Stainless steeljis SS3 (E.308 equivalent) Stainless steeljis SS3 (E.308 equivalent) lumina ceramics (99.9%) Stainless steeljis SS3 (E.308 equivalent) and SUS30(ISI 30 SS /E.30 equivalent) Stainless steeljis SS3 (E.308 equivalent) luminum alloy Material Stainless steeljis SUS30 (ISI 30 SS/E.30 equivalent) Stainless steeljis SUS30 or SUSF30 (ISI 30 SS/E.30 equivalent) arbon steeljis SS00 or SFV Stainless steel E.308 (SS3 equivalent) Stainless steeljis SUS30 (STM 3000/I X6r7/E.06 equivalent) Stainless steeljis SUS30 (STM 3000/I X6r7/E.06 equivalent) Stainless steeljis SUS36L (ISI 36L SS/E.0 equivalent) Stainless steeljis SUS30 (ISI 30 SS/E.30 equivalent) Stainless steeljis SS3 (E.308 equivalent) Stainless steeljis SUS30 (ISI 30 SS/E.30 equivalent) Stainless steel E.308 (SS3 equivalent) Stainless steeljis SUS30 (ISI 30 SS/E.30 equivalent) Stainless steeljis SUS30 (ISI 30 SS/E.30 equivalent) Stainless steel E.308 (SS3 equivalent) Stainless steeljis SUS30 (ISI 30 SS/E.30 equivalent) lumina ceramics (99.9%) Stainless steeljis SS3 (E.308 equivalent) Stainless steeljis SUS30 (ISI 30 SS/E.30 equivalent) luminum alloy T03.EPS T0.EPS mm (6 in) to 00 mm (6 in) Flange Mini Flange Pipe Wetted Part Material: Lining: Fluorocarbon PF* lining Polyurethane Rubber lining atural Soft Rubber lining* EPM Rubber lining*3 lumina ceramics lining *: PF is F (U.S. Food and rug dministration) approval material. *: atural soft rubber is a material which can reduce wear of the lining due to fluids mixed with slurries. If the concentration of mixed slurries is high, contact Yokogawa as necessary measures need to be taken separately for the electrodes. *3: EPM rubber lining is superior in the ozone proof. Electrode: Part ame Housing Process onnection code: ** Process onnection code: ** Wafer Type PF/Polyurethane Rubber/atural Soft Rubber/ EPM Rubber lining Wafer Type eramics lining [available with mm (6.0 in.), 00 mm (8.0 in.)] Flange Type/Wafer Type PF/Polyurethane Rubber/atural Soft Rubber/ EPM Rubber lining Wafer Type eramics lining [available with mm (6.0 in.), 00 mm (8.0 in.)] Terminal ox ( ) Material arbon steeljis SP equivalent Stainless steeljis SUS30 or SUSF30 (ISI 30 SS/E.30 equivalent) arbon steeljis SS00 or SFV arbon steeljis SS00 or SFV Stainless steeljis SUS30 (ISI 30 SS/E.30 equivalent) Stainless steeljis SUS30 (ISI 30 SS/E.30 equivalent) lumina ceramics (99.9%) luminum alloy T05.EPS Stainless steel, JIS SUS36L (ISI 36L SS/E.0 or its equivalent) Hastelloy 76 or its equivalent (*) Titanium, Tantalum, PlatinumIridium, Tungsten arbide, Platinumlumina cermet (only for ceramic lining). ote : For sanitary type SUS36L only rounding Ring/rounding Electrode: rounding Ring (plate type) JIS SUS36 (ISI 36 SS/E.0 or its equivalent), Hastelloy* 76 or its equivalent, Titanium, rounding Electrode (electrode type) Fluorocarbon PF lining + grounding electrode (Tantalum, PlatinumIridium) *: Hastelloy is a registered trademark of Haynes International Inc. *: vailable with sizes.5 to 00mm (0. to 8.0 in.), PF and ceramics linings only. However, the permeable fluids (such as nitric acid, hydrofluoric acid, or sodium hydroxide at high temperature) are unusable. ll Rights Reserved. opyright 003, Rota Yokogawa S 0R0000EE 6th edition, September 5, 0300

8 8 asket: Use Lining Standard eneralpurpose Use / Submersible Type / Explosion proof Type PF/Polyurethane Rubber/ atural Soft Rubber/ EPM Rubber grounding ring o gasket within grounding ring grounding ring eramics asket within asket Material (within ) Fluororesin with ceramic fillers (Valqua #0) grounding ring Joints : Lining Standard eramics Union Joints (size 0 mm or less) weld joint (UW) screw joint (U, UR) nut asket within Materials for Union Joint Process onnection ode UW: Union Joint (weld joint) Process onnection ode U, UR: union joint (screw joint) Stainless steel (JIS SUS36L (SI 36L SS/E.0 equivalent)) ote: ontact Yokogawa office if PV union joint is required. T33.EPS Use Sanitary Type Optional code (,,, or F) Only when selecting the PF lining/ ceramics lining Optional code (F, SF,, or S) Use Lining Standard Optional code (H) asket within dapter for clamp connection dapter for union connection asket Material (within ) *: F is applicable only for ceramics lining. Flange of user s pipe asket Material (for user s flange) F, SF: PTFEsheathed nonasbestos, S: hloroprene rubber dapter for butt weld connection grounding ring asket Material (within ) EPM (ethylene propylene) rubber H: Silicone rubber Sanitary Type PF asket within : Fluororubber for PV pipes (Viton ) : cidresistant fluororubber for PV pipes (Viton ) : lkaliresistant fluororubber for PV pipes (Viton ) F* : Fluororesin with alkaliresistant carbons for metal pipes asket for user s flange T3.EPS asket within Standard dapter for clamp connection dapter for union connection dapter for butt weld connection Materials for dapters (clamp, union, butt weld) Stainless steeljis SUS36L or SUSF36L (ISI 36L SS/E.0 equivalent) ORing (Replaceable electrode type only): Fluororubber (Part number : 9303SE) T3.EPS Recommended askets etween s nd User s Flanges: askets Type Use compressed nonasbestos fiber gaskets, PTFE sheathed nonasbestos gaskets or gaskets which have equivalent elasticity. For optional codes,, and, use rubber gaskets or others which have equivalent elasticity (such as Tefloncoated rubber gaskets). askets e sure to choose a gasket with an inner and outer diameter that does not protrude inside the piping (refer to item of Inner iameter of rounding Ring, Outer iameter for Effective Sealing). If the inner diameter of the gasket is too large, or outer diameter of the gasket is too small, fluid leakage may result. T3.EPS S 0R0000EE 6th edition, September 5, 0300 ll Rights Reserved. opyright 003, Rota Yokogawa

9 9 IER IMETER OF ROUI RI, OUTER IMETER FOR EFFETIVE SELI: XF Standard:.5 to 00 mm Lining.5 (0.) 5 (0.) 0 (0.) 5 (0.5) 5 (.0) 3 (.5) 0 (.5) (.0) 65 (.5) 80 (3.0) 00 (.0) 5 (5.0) (6.0) 00 (8.0) (0) 300 () 3 () 00 (6) Inner diameter of rounding ring [ø] PF/Polyurethane Rubber/ atural Soft Rubber/ EPM Rubber Outer diameter for effective sealing [ø] Water Flange Water Flange 5 (0.59) [ (0.7)] * 38 (.) 30 (.8) 5 (0.59) [ (0.7)] * 38 (.) 30 (.8) 5 (0.59) [ (0.7)] * 38 (.) 30 (.8) 5 (0.59) 38 (.) 3 (.3) 8 (.0) 53 (.09) 53 (.09) 3 (.3) 58 (.8) 58 (.8) (.6) 7 (.80) 7 (.80) 53 (.09) 8 (3.3) 8 (3.3) 66 (.60) 03 (.06) 03 (.06) 77 (3.03) (.9) (.9) 0 (.0) 0 (5.5) 0 (5.5) 8 (5.0) 65 (6.) 65 (6.) 6. (5.75) 90 (7.8) 90 (7.8) 93.6 (7.6) 0 (9.5) 0 (9.5) 3.7 (9.60) 3 (9.57) 300 (.8) 35 (.0) 9.7 (.60) 9.3 (.7) 38 (3.) 360 (.7) 33. (.73) 05 (5.9) (.) 65 (8.3) Inner diameter of rounding ring [ø] 5 (0.59) 7 (.06) 0 (.57) 5 (.05) 8 (3.9) 98 (3.86) (5.67) 9 (7.56) eramics Unit : mm (in.) Outer diameter for effective sealing [ø] 33 (.30) 68 (.68) 8 (3.3) (.) 3 (5.8) 88 (7.0) 0 (9.5) T0330.EPS Replacement Model for earlier M or M E: Unit : mm (in.) Lining PF/Polyurethane Rubber.5 (0.) 5 (0.) 0 (0.) 5 (0.5) 5 (.0) 0 (.5) (.0) 80 (3.0) 00 (.0) (6.0) 00 (8.0) (0) Inner diameter of rounding ring [ø] 5 (0.59) 5 (0.59) 5 (0.59) 5 (0.59) 7 (.06) 0 (.57) 5 (.05) 8 (3.9) 98 (3.86) 0.7 (5.6) 88.9 (7.5) 3 (9.57) Outer diameter for effective sealing [ø] Wafer 38 (.) 38 (.) 38 (.) 38 (.) 56 (.0) 7 (.80) 85 (3.35) 5 (.53) (5.57) 90 (7.8) 0 (9.5) Flange 05 (8.07) 55 (0.0) 35 (.0) T03303.EPS ll Rights Reserved. opyright 003, Rota Yokogawa S 0R0000EE 6th edition, September 5, 0300

10 0 if Inner iameter of rounding ring and Outer iameter for Effective sealing: Electrode onstruction: onreplaceable Electrode Type eneralpurpose Use/Submersible Type/Explosion proof Type: PF, Polyurethane Rubber lining: External insertion type atural Soft Rubber, EPM Rubber lining: Internal insertion type eramics lining: type Sanitary Type: Internal insertion type Replaceable Electrode Type Electrode parts can be put into unit to facilitate replacement or mounting at customer site. The optional dedicated tool (F9807SK) is required. Replaceable electrodes are available for the following: XF standard: Use ø eneral Purpose Use ø asket for User s flange Process onnection Wafer Flange rounding ring vailable 5 to 300 mm (.0 to in) 5 to 00 mm (.0 to 6 in) XF lining Lining PF/ Polyurethane Rubber Electrode Material JIS SUS36L (ISI 36L SS/E.0 equivalent) ( * ) T06.EPS Mounting/Shapes ( ): Electrical onnection: SI / PT female ISO M0.5 female JIS / (PF/) female irection of Electrical onnection: The direction can be changed even after delivery. Terminal onnection at Terminal ox: M size screw rounding: rounding resistance 00 Ω or less * In case of explosion proof type, follow the domestic electrical requirements as regulated in each country. ombined onverter: remote flowtube for sizes of up to 00 mm can be combined with the XF onverter or the XF onverter. If a combined converter is changed from XF to XF or vice versa, a new meter factor must be adjusted by flow calibrations. In case that size mm (0 in.) or larger is used in low conductivity or high concentration slurries, please use the XF onverter. Maximum able Length: ombination of XF remote and XF: up to 00 m (660 ft) ombination of XF remote and XF: up to 00 m (330 ft) Replacement model for earlier M or M E: Use Process onnection vailable Lining Electrode Material eneral Purpose Use Flange to mm (6.0 to 0 in) PF/ Polyurethane Rubber JIS SUS36L (ISI 36L SS/E.0 equivalent) ( * ) T07.EPS *: If any other electrode materials are required, please contact Yokogawa office. S 0R0000EE 6th edition, September 5, 0300 ll Rights Reserved. opyright 003, Rota Yokogawa

11 HZROUS RE LSSIFITIO TEX: ertificate: KEM03TEX35 XF00 XF00 pplicable Standards: E 0, E 08, E 09, E 00, E 08, E 8 ) TEX Flame proof Type roup II ategory EEx dme[ia] II T6...T3 Electrode ircuit Um: V / Excitation ircuit: 0 V max. Enclosure: IP66/IP67 Maximum power supply voltage: V / 30 V lass: ( ) TEX Flame proof Type KEM03TEX35 roup II ategory EEx dme[ia] II T6...T3 Electrode ircuit Um: V / Excitation ircuit: V max. Enclosure: IP66/IP67 lass : ode T6 T5 T T3 Max. Process + (+58 F) +85 (+85 F) +0 (+8 F) + (+30 F) Min. Process 0 (0 F) 0 (0 F) 0 (0 F) 0 (0 F) ode Max. Process Min. Process T8.EPS mbient Temp. : 0 to +60 (0 F to +0 F) T6 T5 T T3 mbient Temp.: 0 to +60 (0 F to +0 F) TEX Type of Protection ust roup II ategory Electrode ircuit Um: V / Maximum power supply voltage: V / 30 V Excitation ircuit: 0 V max. Enclosure: IP66/IP67 Maximum surface temperature : Max. Surface + (+58 F) +85 (+85 F) +0 (+8 F) +30 (+66 F) Max. Process 0 (0 F) 0 (0 F) 0 (0 F) 0 (0 F) T7.EPS TEX Type of Protection ust roup II ategory Electrode ircuit Um: V / Excitation ircuit : V max. Enclosure: IP66/IP67 Maximum surface temperature: Max. Surface T75 (+67 F) T85 (+85 F) T00 (+ F) T5 (+39 F) Max. Process + (+58 F) +85 (+85 F) +0 (+8 F) + (+30 F) T9.EPS mbient Temp.: 0 to +60 (0 F to +0 F) T75 (+67 F) T85 (+85 F) T00 (+ F) T0 (+30 F) + (+58 F) +85 (+85 F) +0 (+8 F) +30 (+66 F) T9.EPS mbient Temp.: 0 to +60 (0 F to +0 F) ll Rights Reserved. opyright 003, Rota Yokogawa S 0R0000EE 6th edition, September 5, 0300

12 FM: XF00 XF00 pplicable Standards: FM3600, FM360, FM365, FM380, SI/EM ( flowmeter) Explosion proof lass I, ivision, roups,, & ust ignition proof lass II/III, ivision, roups E, F & Intrinsically safe (electrodes) lass I, ivision, roups,, & SEL LL OUITS WITHI 8 IHES WHE ISTLLE I IV., SELS OT RE QUIRE Electrode circuit Um: V/ Maximum power supply voltage: V / 30 V Excitation ircuit: 0 V max. Enclosure: EM X ode: T6 (refer to following table) ode T6 T5 T T3 Max. Process + (+58 F) +85 (+85 F) +0 (+8 F) +30 (+66 F) Min. Process 0 (0 F) 0 (0 F) 0 (0 F) 0 (0 F) T7.EPS mbient Temp.: 0 to +60 (0 F to +0 F) ( ) Explosion proof lass I, ivision, roups,, & ust ignition proof lass II/III, ivision, roups E, F & Intrisically safe (electrodes) lass I, ivision, roups,, & SEL LL OUITS WITHI 8 IHES WHE ISTLLE I IV.,SELS OT REQUIRE Electrode circuit Vmax: V/ Excitation ircuit: V max. Enclosure: EM X ode: T6 (refer to following table) S: XF00 XF00 pplicable Standards: For S. Series:. o 0,. o 0.,. o 0.5,. o 5,. o 30,. o 9,. o 57,. o 600. o For S E79 Series: /SE790, /SE79, /SE797, /SE79, /SE798 ertificate: 83 Process Sealing ertification: ual Seal certified by S to the requirements of SI/IS.7.0. o additional sealing required. Primary seal failure annunciation; eterioration of the flowrate output at nonzero flow point. Unstable flowrate output at zero flow point. ( flowmeter) For S. Series Explosion proof lass I, ivision, roups,, & ust ignition proof lass II/III, ivision, roups E, F & Intrisically safe (electrodes) lass I, ivision, roups,, & SEL LL OUITS WITHI cm of the enclosure WHE ISTLLE I IV.,SELS OT REQUIRE Electrode circuit Um: V / Maximum power supply voltage V / 30 V Excitation ircuit: 0 V max. Enclosure: Type X ode: ode T6 T5 T Max. Process + (+58 F) +85 (+85 F) +0 (+8 F) Min. Process 0 (0 F) 0 (0 F) 0 (0 F) ode Max. Process Min. Process T3 +30 (+66 F) 0 (0 F) T7.EPS T6 T5 T T3 + (+58 F) +85 (+85 F) +0 (+8 F) + (+30 F) 0 (0 F) 0 (0 F) 0 (0 F) 0 (0 F) T8.EPS mbient Temp. : 0 to +60 (0 F to +0 F) ote: Installation shall be in accordance with the manufacturer s instructions and ational Electric code, SI/FP and Local Electric ode. mbient Temp.: 0 to +60 (0 F to +0 F) For S E79 Series Flame proof zone, Ex dme[ia II T6...T3 Intrinsically safe (electrodes), Ex ia II T6...T3 Electrode circuit Um: V/ Maximum power supply voltage: V / 30 V Excitation ircuit: 0 V max. Enclosure: IP66, IP67 ode: S 0R0000EE 6th edition, September 5, 0300 ll Rights Reserved. opyright 003, Rota Yokogawa

13 3 ode T6 T5 T T3 mbient Temp.: 0 to +60 (0 F to +0 F) ( ) For S. Series Explosion proof lass I, ivision, roups,, & ust ignition proof lass II/III, ivision, roups E, F & Intrinsically safe (electrodes) lass I, ivision, roups,, & SEL LL OUITS WITHI cm of the enclosure WHE ISTLLE I IV., SELS OT REQUIRE Electrode circuit Um: V / Excitation ircuit: V max. Enclosure: Type X ode: ode T6 T5 T T3 mbient Temp.: 0 to +60 (0 F to +0 F) For S E79 Series Flame proof zone, Ex dme [ia] II T6...T3 Intrinsically safe (electrodes), Ex ia II T6...T3 Electrode circuit Um: V / Excitation ircuit: V max. Enclosure Type IP66/IP67 ode: ode T6 T5 T Max. Process + (+58 F) +85 (+85 F) +0 (+8 F) + (+30 F) Max. Process + (+58 F) +85 (+85 F) +0 (+8 F) + (+30 F) Max. Process + (+58 F) +85 (+85 F) +0 (+8 F) Min. Process 0 (0 F) 0 (0 F) 0 (0 F) 0 (0 F) T8.EPS Min. Process 0 (0 F) 0 (0 F) 0 (0 F) 0 (0 F) T8.EPS Min. Process 0 (0 F) 0 (0 F) 0 (0 F) IEEx: XF00 XF00 pplicable Standard: IE :, IE 60079, IE , IE 60079, IE , IE 60, IE 6, IE Edition. ertificate: IEEx KEM ( ) IEEx Flameproof Type Ex demb[ia] II T6...T3 Electrode circuit Um: V / Maximum power supply voltage: V /30 V Excitation ircuit: 0 V max Enclosure: IP66/IP67 lass: Process lass T6 0 to + (0 F to +58 F) T5 0 to +85 (0 F to +85 F) T 0 to +0 (0 F to +8 F) T3 0 to +30 (0 F to +66 F) T73.EPS mbient Temp.: PF Lining; 0 to +60 ( 0 F to +0 F) eramics Lining; 5 to +60 (5 F to +0 F) IEEx Type of Protection ust Ex t IP6x T95, T05, T0, T30 Electrode ircuit Um: V / Maximum power supply voltage: V /30 V Excitation ircuit: 0 V max Enclosure: IP66/IP67 Maximum surface temperature: Maximum Surface Process T95 (+03 F) T05 (+ F) T0 (+8 F) T30 (+66 F) 0 to + (0 F to +58 F) 0 to +85 (0 F to +85 F) 0 to +0 (0 F to +8 F) 0 to +30 (0 F to +66 F) T77.EPS mbient Temp.: PF Lining: 0 to +60 (0 F to +0 F) eramics Lining: 5 to +60 (5 F to +0 F) T3 + (+30 F) 0 (0 F) mbient Temp.: 0 to +60 (0 F to +0 F) T8.EPS ll Rights Reserved. opyright 003, Rota Yokogawa S 0R0000EE 6th edition, September 5, 0300

14 ( ) IEEx Flameproof Type Ex demb[ia] II T6...T3 Electrode ircuit Um: V / Excitation ircuit: V max Enclosure: IP66/IP67 lass: lass T6 T5 T T3 Process 0 to + (0 F to +58 F) 0 to +85 (0 F to +85 F) 0 to +0 (0 F to +8 F) 0 to + (0 F to +30 F) mbient Temp.: PPF Lining: 0 to +60 (0 F to +0 F) eramics Lining: 5 to +60 (5 F to +0 F) IEEx Type of Protection ust Ex t IP6x T95, T05, T0, T35 Electrode ircuit Um: V / Excitation ircuit: V max Enclosure: IP66/IP67 Maximum surface temperature: Maximum Surface T95 (+03 F) T05 (+ F) T0 (+8 F) T35 (+75 F) Process T75.EPS 0 to + (0 F to +58 F) 0 to +85 (0 F to +85 F) 0 to +0 (0 F to +8 F) 0 to + (0 F to +30 F) T76.EPS mbient Temp.: PPF Lining: 0 to +60 (0 F to +0 F) eramics Lining: 5 to +60 (5 F to +0 F) STR PERFORME ccuracy ote: The accuracy of a product before shipment is defined as totalized value at the result of calibration test in our water actual flow test facility. alibrated conditions in our water actual test facility are as follows: Fluid temperature; 0 ± 0 mbient temperature; 0 ± 5 Length of straight runs; 0 or more on the upstream side; 5 or more on the downstream side Reference conditions; Similar to S E90 (993); ISO 90 (99) Pulse Output: PF/eramics Lining: mm (in).5 (0.) to 5 (0.5) 5 (.0) to 00 (8.0) (0) to 00 (6) Flow Velocity V m/s (ft/s) 0.3 V 0 () (33) V< 0.5 (0.5) 0.5 V 0 (0.5) (33) < 0.5 V 0 (0.5) (33) Standard ccuracy (alibration code ) ±.0 mm/s ±0.35 % of Rate ±0.5 mm/s V<0.5 (0.5) ±0.5 mm/s ±035 % of Rate ±0.5 mm/s ±0.35 % of Rate Flow Velocity V m/s (ft/s) < V 0 (3.3) (33) gh rade ccuracy (alibration code ) ±0.8 % of Rate ± 0. mm/s ±0. % of Rate Enhanced dual frequency excitation(option code HF): Standard accuracy ± mm/ s.5 mm (0. in) to 5 mm (0.5 in) % of Rate. T08.EPS Pulse 0.6 Output ccuracy gh Standard grade ccuracy V [m/s] F.EPS 5 mm (.0 in) to 00 mm (6 in) % of Rate Pulse 0.6 Output ccuracy Standard ccuracy ghgrade ccuracy V[m/s] F5.EPS S 0R0000EE 6th edition, September 5, 0300 ll Rights Reserved. opyright 003, Rota Yokogawa

15 5 Polyurethane Rubber/atural Soft Rubber/ EPM Rubber Lining: mm (in.) 5 (.0) to 00 (6) Flow Velocity V m/s (ft/s) V < 0.3 (.0) 0.3 V 0 (.0) (33) 5 mm (.0 in) to 00 mm (6 in) % of Rate Pulse 0.6 Output ccuracy gh Standard grade ccuracy Standard ccuracy (alibr. code ) ±.0 mm/s ±0.35% of Rate T09.EPS V [m/s] F6.EPS urrent Output: Pulse output accuracy plus 0.05 % of Span Repeatability: ± 0. % of Rate (V m/s (3.3 ft/s)) ± 0.05 % of Rate ± 0.5 mm/s (V < m/s (3.3 ft/s)) Maximum Power onsumption: : W : ombined with XF: 0 W ombined with XF: W Insulation Resistance (Performance Requirements) (*): : etween power terminals and ground terminal: 00 MΩ at 0 V etween power terminals and each output/status input terminal: 00 MΩ at 0 V etween ground terminal and each output/ status input terminal: 0 MΩ at 00 V etween output/status input terminals: 0 MΩ at 00 V : etween excitation terminals and each signal terminal: 00 MΩ at 0 V etween signal terminals: 00 MΩ at 0 V etween signal terminals and common terminal () : 00MΩ at 0V Withstand Voltage (Performance) (*): etween power supply terminals and ground terminal: 00 V for seconds etween power supply terminals and input/output terminals: 00 V for seconds (option code KF, F, and SF) etween excitation current terminal and ground terminal: 0 V for minute etween signal terminals and ground terminal 0 V for minute etween signal terminals and excitation current terminal: 000V for minute (option code FF) etween signal terminals and ground terminal: 0 V for minute or 600 V for second etween signal terminals and excitation current terminal: 000 V for minute or 00 V for second UTIO *: When performing the Insulation Resistance Test or the Withstand Voltage Test, please obey the following caution. Following the relevant test, wait for more than 0 seconds after the power supply has been turned off before removing the cover. Remove all wires from terminals before testing. When the power terminal has a lighting protector (optional code ), remove the short bar at the ground terminal. fter testing, be sure to discharge by using a resistance and return all wires and the short bar to its correct position. Screws must be tightened to a torque of.8 m or more. fter closing the cover, the power supply can be restored. Safety Requirement Standards: E 600 E ltitude at installation site: Max. 000 m above sea level Installation category based on IE 00: Overvoltage category II ( II applies to electrical equipment which is supplied from the fixed installation like distribution board.) Pollution degree based on IE 00 Pollution degree ( Pollution degree describes the degree to which a solid, liquid, or gas which deteriorates dielectric strength or surface resistivity is adhering. applies to a normal indoor atmosphere.) EM onformity Standards: E636 lass, Table (For use in industrial locations) E6363 E60003 lass E Pressure Equipment irective (PE): Module: H Type of Equipment: Piping Type of Fluid: Liquid and as roup of Fluid: and ll Rights Reserved. opyright 003, Rota Yokogawa S 0R0000EE 6th edition, September 5, 0300

16 6 eneralpurpose Use/Submersible Style/ Explosion proof Style: MOEL (mm) (*) PS (MPa) (*) PS (MPa mm) XF00/.5 0 XF005/ 5 0 XF00/ 0 0 XF05/W/ 5 60 XF05/W/ 5 00 XF03/W/ XF00/W/ XF0/W/ XF065/W/ XF080/W/ XF00/W/ XF5/W/ XF/W/ XF00/W/ XF/W/ XF300/W/ XF3/W/ XF00/W/ Sanitary Style: MOEL (mm) (*) PS (bar) (*) XF05H XF05H XF03H XF00H XF0H XF065H XF080H XF00H XF5H TEORY (*) rticle 3, (*3) paragraph 3 rticle 3, (*3) paragraph 3 rticle 3, (*3) paragraph 3 rticle 3, (*3) paragraph 3 rticle 3, (*3) paragraph 3 II II II II II II II II III III III II III T0.EPS PS TEORY (*) (MPas mm) rticle 3, (*3) paragraph 3 rticle 3, (*3) paragraph 3 I I I I I I II *: PS: Maximum allowable pressure for : ominal size *: For details, see Table 6 covered by EX II of E irective on Pressure Equipment irective 97/3/E. *3: XF00 to XF05/W/, XF05H and XF05H are outside the scope of E marking of PE. T0.EPS ORML OPERTI OITIOS mbient : 0 to 60 (0 F to 0 F) *: Minimum temperature should also be limited according to minimum fluid temperature of flow tube s specification. Refer to description of Fluid and Pressure. *: Indicator s operating range (integral flowmeter): 0 to +60 ( to +0 F) *3: Maximum temperature should be + (+ F) in the case of power supply code (integral flowmeter). mbient Humidity: 0 to 00 % Lengthy continuous operation at 95 % or more is not recommended. Power Supply (integral flowmeter): Power supply code : specifications Rated power supply: 00 to 0 V, /60 Hz (Operating voltage range: 80 to 6 V ) specifications Rated power supply: 00 to 0 V (Operating voltage range: 90 to 30 V ) Power supply code : specifications Rated power supply: V, /60 Hz (Operating voltage range: 0. to 8.8 V ) specifications Rated power supply: V (Operating voltage range: 0. to 8.8 V ) Supply Voltage and able Length for Power Supply ode llowable cable length m(ft) 796 (60) 600 (9) 6 (60) 00 ( 660) Usable range E (V) able cross section area:.5 mm able cross section area: mm F0.EPS Fluid onductivity:.5 to 0 mm (0. to 0. in): 5 µs/cm or larger 5 to 5 mm (0.5 to 5 in): µs/cm or larger to 00 mm (6 to 6 in): 3 µs/cm or larger ote: Fluids with large flow noise (pure water, fluid with low conductivity and low viscosity such as alcohol) cause the output fluctuation. e careful that it affects the flow rate measurement. S 0R0000EE 6th edition, September 5, 0300 ll Rights Reserved. opyright 003, Rota Yokogawa

17 7 able Length and Liquid onductivity ( ):.5 to 0 mm (0. to 0. in) m (ft) dd ±% of rate to the accuracy shown in accuracy description able length able length able length 00 (330) ombined with XF () 3 (0) 0 (0) or XF converter µs/cm Liquid conductivity 5 to 5 mm (0.5 to 5.0 in) m (ft) 00 (660) m (ft) 00 (660) 00 (330) dd ±% of rate to the accuracy shown in accuracy description () 5 (85) 0 (0) Liquid conductivity s shown in accuracy description s shown in accuracy description ombined with XF converter 00 (330) ombined with XF converter 5 (85) 0 (0) µs/cm Liquid conductivity to 00 mm (6.0 to 6 in) dd ±% of rate to the accuracy shown in accuracy description s shown in accuracy description ombined with XF converter ombined with XF converter 5 µs/cm F03.EPS ote: In case that size or 300 mm (0 or in) is used for high conductivity fluid (e.g. caustic soda, seawater), please use the flange type. Measurable Flow rate Range: (mm) SI Units (: mm, Flow rate: m³/h) 0 to Min. Span Flow Rate (0. m/s) 0 to Max. Span Flow Rate (0 m/s).5 0 to m 3 /h 0 to m 3 /h 5 0 to to to to to to to to to to to to to to to.96 0 to to to to to to.8 0 to.7 0 to to to.30 0 to to to to to to to to 5. 0 to 53 (in.) 0 to Min. Span Flow Rate (0.33 ft/s) 0 to Max. Span Flow Rate (33ft/s) T.EPS English Units (: in, Flow rate: PM) 0. 0 to PM 0 to PM 0. 0 to to to to to to to to to.6 0 to to.75 0 to to to to to to to to.5 0 to to to to to to to to to to. 0 to.03 0 to to to to 9.98 T.EPS ll Rights Reserved. opyright 003, Rota Yokogawa S 0R0000EE 6th edition, September 5, 0300

18 8 Fluid and Pressure: ote * The following figures show maximum allowable PF Lining (*) fluid pressure for the flowtube. Further fluid pressure should also be limitted according to flange rating. * For fluid temperature of the explosion proof type, refer to descriptions of HZROUS RE LSSIFITIO. eneralpurpose Use, Submersible type, Explosion proof type, (Electrode structure code : onreplaceable electrode) Pressure MPa (psi) (580) (90) (5) 0. (.5) 0 ( 0).5 to mm (0. to.0 in) (flange type, wafer type) 65 to 00 mm (.5 to 8.0 in) (flange type, wafer type), 300 mm (0, in) (flange type), 300 mm (0, in) (wafer type) 3, 00 mm (, 6 in) (flange type) * (+) (+3) (+0) (+) (+66) (+30) (+30) ( F) F8.EPS eneralpurpose Use and Explosion proof type, flowmeter (Electrode structure code : onreplaceable electrode) Pressure MPa (psi) (580) (90) (5) 0. (.5).5 to mm (0. to.0 in) (flange type, wafer type) 65 to 00 mm (.5 to 8.0 in) (flange type, wafer type), 300 mm (0, in) (flange type), 300 mm (0, in) (wafer type) 3, 00 mm (, 6 in) (flange type) * ( 0) () (3) (0) () (66) ( F) F8.EPS *: For wafer types of 3 mm to 300 mm(.5 to in.) and carbon steel flange types (process connection code: **) of to 00 mm (.0 to 6 in.), the minimum temperature is 0 (+ F). *: For fluid temperature of the explosion proof type, refer to descriptions of HZROUS RE LSSIFITIO. eneralpurpose Use, (Electrode structure code : replaceable electrode) Pressure MPa (psi) eneralpurpose Use, (Electrode structure code : replaceable electrode) Pressure MPa (psi) (90) (5) 0. (.5) 0 0 () (3) 5 to 00 mm (.0 to 8.0 in) (flange type, wafer type), 300 mm (0, in) (flange type) 3, 00 mm ( to 6 in) (flange type), 300 mm (0, in) (wafer type) 0 (0) 00 () 30 (66) ( F) ote: For replaceable electrodes for fluid temperatures of 0 ( F) or less, please contact your Yokogawa office. Sanitary type (Electrode structure code : onreplaceable electrode) Pressure MPa (psi) (5) 0.(.5) 5 to 5 mm (0.5 to 5.0 in) (remote flowtube) 5 to 5 mm (0.5 to 5.0 in) (integral flowmeter) 0 0 (+) (+3) +30 (+66) +60 (+30) ( F) ote: In case of 0 to 60 (8 to 30 F) of fluid temperature, please select optional code H. eramics Lining F85.EPS F8.EPS eneralpurpose Use and Explosion proof type, (Electrode structure code : onreplaceable electrode) Pressure MPa (psi) (580) (90) (90) (5) 0. (.5) 5 to 00 mm (.0 to 8.0 in) (flange type, wafer type), 300 mm (0, in) (flange type) 3, 00 mm ( to 6 in) (flange type), 300 mm (0, in) (wafer type) () (3) (0) () ( F).5 to mm (0. to.0 in.) 80 to 00 mm (3.0 to 8.0 in.) 30 (66) 60 (30) F83.EPS 0. (.5) 0 0 (+) (+3) +00 (+) (F) +80 (+356) F9.EPS S 0R0000EE 6th edition, September 5, 0300 ll Rights Reserved. opyright 003, Rota Yokogawa